mmci: Add support for ST Micro derivate

This patch adds support for the ST Microelectronics version of
the PL180 PrimeCell. They use designer ID 0x80 and have a few
alterations/bugfixes related to open drain and HW flow control.
They also add some SDIO registers, I am unsure if these are
in ST HW only or if this is things also added in later ARM
revisions, but they are included in the mmci.h file for
completeness.

Signed-off-by: Linus Walleij <linus.walleij@ericsson.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 1bcbdd6763ace8d1dc3a91db7a5b1d0c76a67b63..2909bbc8ad009aa751522087618f3886d9853019 100644 (file)
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -430,6 +430,8 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
                                clk = 255;
                        host->cclk = host->mclk / (2 * (clk + 1));
                }
+               if (host->hw_designer == 0x80)
+                       clk |= MCI_FCEN; /* Bug fix in ST IP block */
                clk |= MCI_CLK_ENABLE;
        }
 
@@ -440,15 +442,27 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
        case MMC_POWER_OFF:
                break;
        case MMC_POWER_UP:
-               pwr |= MCI_PWR_UP;
-               break;
+               /* The ST version does not have this, fall through to POWER_ON */
+               if (host->hw_designer != 0x80) {
+                       pwr |= MCI_PWR_UP;
+                       break;
+               }
        case MMC_POWER_ON:
                pwr |= MCI_PWR_ON;
                break;
        }
 
-       if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
-               pwr |= MCI_ROD;
+       if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) {
+               if (host->hw_designer != 0x80)
+                       pwr |= MCI_ROD;
+               else {
+                       /*
+                        * The ST Micro variant use the ROD bit for something
+                        * else and only has OD (Open Drain).
+                        */
+                       pwr |= MCI_OD;
+               }
+       }
 
        writel(clk, host->base + MMCICLOCK);
 
@@ -500,6 +514,12 @@ static int mmci_probe(struct amba_device *dev, void *id)
        }
 
        host = mmc_priv(mmc);
+       /* Bits 12 thru 19 is the designer */
+       host->hw_designer = (dev->periphid >> 12) & 0xff;
+       /* Bits 20 thru 23 is the revison */
+       host->hw_revision = (dev->periphid >> 20) & 0xf;
+       DBG(host, "designer ID = 0x%02x\n", host->hw_designer);
+       DBG(host, "revision = 0x%01x\n", host->hw_revision);
        host->clk = clk_get(&dev->dev, NULL);
        if (IS_ERR(host->clk)) {
                ret = PTR_ERR(host->clk);
@@ -693,6 +713,15 @@ static struct amba_id mmci_ids[] = {
                .id     = 0x00041181,
                .mask   = 0x000fffff,
        },
+       /* ST Micro variants */
+       {
+               .id     = 0x00180180,
+               .mask   = 0x00ffffff,
+       },
+       {
+               .id     = 0x00280180,
+               .mask   = 0x00ffffff,
+       },
        { 0, 0 },
 };
 

diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 0f39c490f022086dc6e8c8cd99c789252ae6ea27..0441bac1c0eca66de761c353fb69370c74382ca0 100644 (file)
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -11,13 +11,23 @@
 #define MCI_PWR_OFF            0x00
 #define MCI_PWR_UP             0x02
 #define MCI_PWR_ON             0x03
+#define MCI_DATA2DIREN         (1 << 2)
+#define MCI_CMDDIREN           (1 << 3)
+#define MCI_DATA0DIREN         (1 << 4)
+#define MCI_DATA31DIREN                (1 << 5)
 #define MCI_OD                 (1 << 6)
 #define MCI_ROD                        (1 << 7)
+/* The ST Micro version does not have ROD */
+#define MCI_FBCLKEN            (1 << 7)
+#define MCI_DATA74DIREN                (1 << 8)
 
 #define MMCICLOCK              0x004
 #define MCI_CLK_ENABLE         (1 << 8)
 #define MCI_CLK_PWRSAVE                (1 << 9)
 #define MCI_CLK_BYPASS         (1 << 10)
+#define MCI_WIDE_BUS           (1 << 11)
+/* HW flow control on the ST Micro version */
+#define MCI_FCEN               (1 << 13)
 
 #define MMCIARGUMENT           0x008
 #define MMCICOMMAND            0x00c
@@ -26,6 +36,10 @@
 #define MCI_CPSM_INTERRUPT     (1 << 8)
 #define MCI_CPSM_PENDING       (1 << 9)
 #define MCI_CPSM_ENABLE                (1 << 10)
+#define MCI_SDIO_SUSP          (1 << 11)
+#define MCI_ENCMD_COMPL                (1 << 12)
+#define MCI_NIEN               (1 << 13)
+#define MCI_CE_ATACMD          (1 << 14)
 
 #define MMCIRESPCMD            0x010
 #define MMCIRESPONSE0          0x014
@@ -39,6 +53,11 @@
 #define MCI_DPSM_DIRECTION     (1 << 1)
 #define MCI_DPSM_MODE          (1 << 2)
 #define MCI_DPSM_DMAENABLE     (1 << 3)
+#define MCI_DPSM_BLOCKSIZE     (1 << 4)
+#define MCI_DPSM_RWSTART       (1 << 8)
+#define MCI_DPSM_RWSTOP                (1 << 9)
+#define MCI_DPSM_RWMOD         (1 << 10)
+#define MCI_DPSM_SDIOEN                (1 << 11)
 
 #define MMCIDATACNT            0x030
 #define MMCISTATUS             0x034
@@ -63,6 +82,8 @@
 #define MCI_RXFIFOEMPTY                (1 << 19)
 #define MCI_TXDATAAVLBL                (1 << 20)
 #define MCI_RXDATAAVLBL                (1 << 21)
+#define MCI_SDIOIT             (1 << 22)
+#define MCI_CEATAEND           (1 << 23)
 
 #define MMCICLEAR              0x038
 #define MCI_CMDCRCFAILCLR      (1 << 0)
@@ -75,6 +96,8 @@
 #define MCI_CMDSENTCLR         (1 << 7)
 #define MCI_DATAENDCLR         (1 << 8)
 #define MCI_DATABLOCKENDCLR    (1 << 10)
+#define MCI_SDIOITC            (1 << 22)
+#define MCI_CEATAENDC          (1 << 23)
 
 #define MMCIMASK0              0x03c
 #define MCI_CMDCRCFAILMASK     (1 << 0)
@@ -98,6 +121,8 @@
 #define MCI_RXFIFOEMPTYMASK    (1 << 19)
 #define MCI_TXDATAAVLBLMASK    (1 << 20)
 #define MCI_RXDATAAVLBLMASK    (1 << 21)
+#define MCI_SDIOITMASK         (1 << 22)
+#define MCI_CEATAENDMASK       (1 << 23)
 
 #define MMCIMASK1              0x040
 #define MMCIFIFOCNT            0x048
@@ -136,6 +161,9 @@ struct mmci_host {
        u32                     pwr;
        struct mmc_platform_data *plat;
 
+       u8                      hw_designer;
+       u8                      hw_revision:4;
+
        struct timer_list       timer;
        unsigned int            oldstat;