ALSA: Fix documentation for snd-cs4236 driver

Updated; removal of snd-cs4232 entry.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index a763b76afe5148c35a5a787af503ec3bf55a440c..57fe4f3ca2c046a616cb0cce392fa77faa406bee 100644 (file)
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -391,34 +391,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
     
-  Module snd-cs4232
-  -----------------
-
-    Module for sound cards based on CS4232/CS4232A ISA chips.
-
-    isapnp     - ISA PnP detection - 0 = disable, 1 = enable (default)
-
-    with isapnp=0, the following options are available:
-
-    port       - port # for CS4232 chip (PnP setup - 0x534)
-    cport      - control port # for CS4232 chip (PnP setup - 0x120,0x210,0xf00)
-    mpu_port   - port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
-    fm_port    - FM port # for CS4232 chip (PnP setup - 0x388), -1 = disable
-    irq                - IRQ # for CS4232 chip (5,7,9,11,12,15)
-    mpu_irq    - IRQ # for MPU-401 UART (9,11,12,15)
-    dma1       - first DMA # for CS4232 chip (0,1,3)
-    dma2       - second DMA # for Yamaha CS4232 chip (0,1,3), -1 = disable
-    
-    This module supports multiple cards. This module does not support autoprobe
-    (if ISA PnP is not used) thus main port must be specified!!! Other ports are
-    optional.
-
-    The power-management is supported.
-    
   Module snd-cs4236
   -----------------
 
-    Module for sound cards based on CS4235/CS4236/CS4236B/CS4237B/
+    Module for sound cards based on CS4232/CS4232A,
+                                  CS4235/CS4236/CS4236B/CS4237B/
                                    CS4238B/CS4239 ISA chips.
 
     isapnp     - ISA PnP detection - 0 = disable, 1 = enable (default)
@@ -440,6 +417,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+    This module is aliased as snd-cs4232 since it provides the old
+    snd-cs4232 functionality, too.
+
   Module snd-cs4281
   -----------------