sis5513: DMA setup fixes

* Add sis_ata133_get_base() helper function for obtaining the address of
  the drive control registers on chipset_family == ATA_133 chipsets.

* Add three helper functions for programming PIO/MWDMA timings:
  - sis_ata16_program_timings()  (for ATA_16/33/66/100a chipset families)
  - sis_ata100_program_timings() (for ATA_100/133a chipset families)
  - sis_ata133_program_timings() (for ATA_133 chipset family)

  MWDMA timings are taken from datasheets and they match ATA spec.

* Add generic helper function sis_program_timings() and use it in
  ->set_pio_mode and ->set_dma_mode methods (previously the driver
  depended on BIOS to program the correct MWDMA timings).

* Remove redundant !chipset_family check from init_hwif_sis5513()
  (init_chipset_sis5513() guarantees that we will never get here if
   chipset_family cannot be determined).

* SWDMA seems to be unsupported by SiS chipsets (no info about SWDMA in
  datasheets and for SWDMA0 mode timing requirements are impossible to
  fulfill) so remove ->swdma_mask from init_hwif_sis5513() and handling
  of SWDMA modes from sis_set_dma_mode().

* Enable DMA support for chipset_family == ATA_16.

* Bump driver version.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index b375ee53d66d61997fd35bd4e49c395658b80bed..db8d96bd5a6437d404f9314702249dedffa5a05d 100644 (file)
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/sis5513.c     Version 0.27    Jul 14, 2007
+ * linux/drivers/ide/pci/sis5513.c     Version 0.28    Aug 1, 2007
  *
  * Copyright (C) 1999-2000     Andre Hedrick <andre@linux-ide.org>
  * Copyright (C) 2002          Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
@@ -433,6 +433,95 @@ static int sis_get_info (char *buffer, char **addr, off_t offset, int count)
 /*
  * Configuration functions
  */
+
+static u8 sis_ata133_get_base(ide_drive_t *drive)
+{
+       struct pci_dev *dev = drive->hwif->pci_dev;
+       u32 reg54 = 0;
+
+       pci_read_config_dword(dev, 0x54, &reg54);
+
+       return ((reg54 & 0x40000000) ? 0x70 : 0x40) + drive->dn * 4;
+}
+
+static void sis_ata16_program_timings(ide_drive_t *drive, const u8 mode)
+{
+       struct pci_dev *dev = drive->hwif->pci_dev;
+       u16 t1 = 0;
+       u8 drive_pci = 0x40 + drive->dn * 2;
+
+       const u16 pio_timings[]   = { 0x000, 0x607, 0x404, 0x303, 0x301 };
+       const u16 mwdma_timings[] = { 0x008, 0x302, 0x301 };
+
+       pci_read_config_word(dev, drive_pci, &t1);
+
+       /* clear active/recovery timings */
+       t1 &= ~0x070f;
+       if (mode >= XFER_MW_DMA_0) {
+               if (chipset_family > ATA_16)
+                       t1 &= ~0x8000;  /* disable UDMA */
+               t1 |= mwdma_timings[mode - XFER_MW_DMA_0];
+       } else
+               t1 |= pio_timings[mode - XFER_PIO_0];
+
+       pci_write_config_word(dev, drive_pci, t1);
+}
+
+static void sis_ata100_program_timings(ide_drive_t *drive, const u8 mode)
+{
+       struct pci_dev *dev = drive->hwif->pci_dev;
+       u8 t1, drive_pci = 0x40 + drive->dn * 2;
+
+       /* timing bits: 7:4 active 3:0 recovery */
+       const u8 pio_timings[]   = { 0x00, 0x67, 0x44, 0x33, 0x31 };
+       const u8 mwdma_timings[] = { 0x08, 0x32, 0x31 };
+
+       if (mode >= XFER_MW_DMA_0) {
+               u8 t2 = 0;
+
+               pci_read_config_byte(dev, drive_pci, &t2);
+               t2 &= ~0x80;    /* disable UDMA */
+               pci_write_config_byte(dev, drive_pci, t2);
+
+               t1 = mwdma_timings[mode - XFER_MW_DMA_0];
+       } else
+               t1 = pio_timings[mode - XFER_PIO_0];
+
+       pci_write_config_byte(dev, drive_pci + 1, t1);
+}
+
+static void sis_ata133_program_timings(ide_drive_t *drive, const u8 mode)
+{
+       struct pci_dev *dev = drive->hwif->pci_dev;
+       u32 t1 = 0;
+       u8 drive_pci = sis_ata133_get_base(drive), clk, idx;
+
+       pci_read_config_dword(dev, drive_pci, &t1);
+
+       t1 &= 0xc0c00fff;
+       clk = (t1 & 0x08) ? ATA_133 : ATA_100;
+       if (mode >= XFER_MW_DMA_0) {
+               t1 &= ~0x04;    /* disable UDMA */
+               idx = mode - XFER_MW_DMA_0 + 5;
+       }
+               idx = mode - XFER_PIO_0;
+       t1 |= ini_time_value[clk][idx] << 12;
+       t1 |= act_time_value[clk][idx] << 16;
+       t1 |= rco_time_value[clk][idx] << 24;
+
+       pci_write_config_dword(dev, drive_pci, t1);
+}
+
+static void sis_program_timings(ide_drive_t *drive, const u8 mode)
+{
+       if (chipset_family < ATA_100)           /* ATA_16/33/66/100a */
+               sis_ata16_program_timings(drive, mode);
+       else if (chipset_family < ATA_133)      /* ATA_100/133a */
+               sis_ata100_program_timings(drive, mode);
+       else                                    /* ATA_133 */
+               sis_ata133_program_timings(drive, mode);
+}
+
 /* Enables per-drive prefetch and postwrite */
 static void config_drive_art_rwp (ide_drive_t *drive)
 {
@@ -450,105 +539,16 @@ static void config_drive_art_rwp (ide_drive_t *drive)
                pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch);
 }
 
-/* Set per-drive active and recovery time */
 static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
-       ide_hwif_t *hwif        = HWIF(drive);
-       struct pci_dev *dev     = hwif->pci_dev;
-
-       u8 drive_pci, test1, test2;
-
        config_drive_art_rwp(drive);
-
-       /* In pre ATA_133 case, drives sit at 0x40 + 4*drive->dn */
-       drive_pci = 0x40;
-       /* In SiS962 case drives sit at (0x40 or 0x70) + 8*drive->dn) */
-       if (chipset_family >= ATA_133) {
-               u32 reg54h;
-               pci_read_config_dword(dev, 0x54, &reg54h);
-               if (reg54h & 0x40000000) drive_pci = 0x70;
-               drive_pci += ((drive->dn)*0x4);
-       } else {
-               drive_pci += ((drive->dn)*0x2);
-       }
-
-       /* register layout changed with newer ATA100 chips */
-       if (chipset_family < ATA_100) {
-               pci_read_config_byte(dev, drive_pci, &test1);
-               pci_read_config_byte(dev, drive_pci+1, &test2);
-
-               /* Clear active and recovery timings */
-               test1 &= ~0x0F;
-               test2 &= ~0x07;
-
-               switch(pio) {
-                       case 4:         test1 |= 0x01; test2 |= 0x03; break;
-                       case 3:         test1 |= 0x03; test2 |= 0x03; break;
-                       case 2:         test1 |= 0x04; test2 |= 0x04; break;
-                       case 1:         test1 |= 0x07; test2 |= 0x06; break;
-                       case 0:         /* PIO0: register setting == X000 */
-                       default:        break;
-               }
-               pci_write_config_byte(dev, drive_pci, test1);
-               pci_write_config_byte(dev, drive_pci+1, test2);
-       } else if (chipset_family < ATA_133) {
-               switch(pio) { /*                active  recovery
-                                                 v     v */
-                       case 4:         test1 = 0x30|0x01; break;
-                       case 3:         test1 = 0x30|0x03; break;
-                       case 2:         test1 = 0x40|0x04; break;
-                       case 1:         test1 = 0x60|0x07; break;
-                       case 0:         test1 = 0x00; break;
-                       default:        break;
-               }
-               pci_write_config_byte(dev, drive_pci, test1);
-       } else { /* ATA_133 */
-               u32 test3;
-               pci_read_config_dword(dev, drive_pci, &test3);
-               test3 &= 0xc0c00fff;
-               if (test3 & 0x08) {
-                       test3 |= ini_time_value[ATA_133][pio] << 12;
-                       test3 |= act_time_value[ATA_133][pio] << 16;
-                       test3 |= rco_time_value[ATA_133][pio] << 24;
-               } else {
-                       test3 |= ini_time_value[ATA_100][pio] << 12;
-                       test3 |= act_time_value[ATA_100][pio] << 16;
-                       test3 |= rco_time_value[ATA_100][pio] << 24;
-               }
-               pci_write_config_dword(dev, drive_pci, test3);
-       }
+       sis_program_timings(drive, XFER_PIO_0 + pio);
 }
 
 static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
 {
        ide_hwif_t *hwif        = HWIF(drive);
        struct pci_dev *dev     = hwif->pci_dev;
-       u32 regdw;
-       u8 drive_pci, reg;
-
-       /* See sis_set_pio_mode() for drive PCI config registers */
-       drive_pci = 0x40;
-       if (chipset_family >= ATA_133) {
-               u32 reg54h;
-               pci_read_config_dword(dev, 0x54, &reg54h);
-               if (reg54h & 0x40000000) drive_pci = 0x70;
-               drive_pci += ((drive->dn)*0x4);
-               pci_read_config_dword(dev, (unsigned long)drive_pci, &regdw);
-               /* Disable UDMA bit for non UDMA modes on UDMA chips */
-               if (speed < XFER_UDMA_0) {
-                       regdw &= 0xfffffffb;
-                       pci_write_config_dword(dev, (unsigned long)drive_pci, regdw);
-               }
-       
-       } else {
-               drive_pci += ((drive->dn)*0x2);
-               pci_read_config_byte(dev, drive_pci+1, &reg);
-               /* Disable UDMA bit for non UDMA modes on UDMA chips */
-               if ((speed < XFER_UDMA_0) && (chipset_family > ATA_16)) {
-                       reg &= 0x7F;
-                       pci_write_config_byte(dev, drive_pci+1, reg);
-               }
-       }
 
        /* Config chip for mode */
        switch(speed) {
@@ -560,6 +560,10 @@ static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
                case XFER_UDMA_1:
                case XFER_UDMA_0:
                        if (chipset_family >= ATA_133) {
+                               u32 regdw = 0;
+                               u8 drive_pci = sis_ata133_get_base(drive);
+
+                               pci_read_config_dword(dev, drive_pci, &regdw);
                                regdw |= 0x04;
                                regdw &= 0xfffff00f;
                                /* check if ATA133 enable */
@@ -572,6 +576,9 @@ static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
                                }
                                pci_write_config_dword(dev, (unsigned long)drive_pci, regdw);
                        } else {
+                               u8 drive_pci = 0x40 + drive->dn * 2, reg = 0;
+
+                               pci_read_config_byte(dev, drive_pci+1, &reg);
                                /* Force the UDMA bit on if we want to use UDMA */
                                reg |= 0x80;
                                /* clean reg cycle time bits */
@@ -586,9 +593,7 @@ static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
                case XFER_MW_DMA_2:
                case XFER_MW_DMA_1:
                case XFER_MW_DMA_0:
-               case XFER_SW_DMA_2:
-               case XFER_SW_DMA_1:
-               case XFER_SW_DMA_0:
+                       sis_program_timings(drive, speed);
                        break;
                default:
                        BUG();
@@ -617,11 +622,9 @@ static int sis5513_config_xfer_rate(ide_drive_t *drive)
 static u8 sis5513_ata133_udma_filter(ide_drive_t *drive)
 {
        struct pci_dev *dev = drive->hwif->pci_dev;
-       int drive_pci;
-       u32 reg54 = 0, regdw = 0;
+       u32 regdw = 0;
+       u8 drive_pci = sis_ata133_get_base(drive);
 
-       pci_read_config_dword(dev, 0x54, &reg54);
-       drive_pci = ((reg54 & 0x40000000) ? 0x70 : 0x40) + drive->dn * 4;
        pci_read_config_dword(dev, drive_pci, &regdw);
 
        /* if ATA133 disable, we should not set speed above UDMA5 */
@@ -848,22 +851,17 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif)
 
        hwif->ultra_mask = udma_rates[chipset_family];
        hwif->mwdma_mask = 0x07;
-       hwif->swdma_mask = 0x07;
-
-       if (!chipset_family)
-               return;
 
        if (hwif->cbl != ATA_CBL_PATA40_SHORT)
                hwif->cbl = ata66_sis5513(hwif);
 
-       if (chipset_family > ATA_16) {
-               hwif->ide_dma_check = &sis5513_config_xfer_rate;
-               if (!noautodma)
-                       hwif->autodma = 1;
-       }
+       hwif->ide_dma_check = &sis5513_config_xfer_rate;
+
+       if (!noautodma)
+               hwif->autodma = 1;
+
        hwif->drives[0].autodma = hwif->autodma;
        hwif->drives[1].autodma = hwif->autodma;
-       return;
 }
 
 static ide_pci_device_t sis5513_chipset __devinitdata = {