#include <linux/usb.h>
#include "../comedidev.h"
-#include "dt9812.h"
+
+#define DT9812_DIAGS_BOARD_INFO_ADDR 0xFBFF
+#define DT9812_MAX_WRITE_CMD_PIPE_SIZE 32
+#define DT9812_MAX_READ_CMD_PIPE_SIZE 32
+
+/*
+ * See Silican Laboratories C8051F020/1/2/3 manual
+ */
+#define F020_SFR_P4 0x84
+#define F020_SFR_P1 0x90
+#define F020_SFR_P2 0xa0
+#define F020_SFR_P3 0xb0
+#define F020_SFR_AMX0CF 0xba
+#define F020_SFR_AMX0SL 0xbb
+#define F020_SFR_ADC0CF 0xbc
+#define F020_SFR_ADC0L 0xbe
+#define F020_SFR_ADC0H 0xbf
+#define F020_SFR_DAC0L 0xd2
+#define F020_SFR_DAC0H 0xd3
+#define F020_SFR_DAC0CN 0xd4
+#define F020_SFR_DAC1L 0xd5
+#define F020_SFR_DAC1H 0xd6
+#define F020_SFR_DAC1CN 0xd7
+#define F020_SFR_ADC0CN 0xe8
+
+#define F020_MASK_ADC0CF_AMP0GN0 0x01
+#define F020_MASK_ADC0CF_AMP0GN1 0x02
+#define F020_MASK_ADC0CF_AMP0GN2 0x04
+
+#define F020_MASK_ADC0CN_AD0EN 0x80
+#define F020_MASK_ADC0CN_AD0INT 0x20
+#define F020_MASK_ADC0CN_AD0BUSY 0x10
+
+#define F020_MASK_DACxCN_DACxEN 0x80
+
+typedef enum {
+ /* A/D D/A DI DO CT */
+ DT9812_DEVID_DT9812_10, /* 8 2 8 8 1 +/- 10V */
+ DT9812_DEVID_DT9812_2PT5,/* 8 2 8 8 1 0-2.44V */
+#if 0
+ DT9812_DEVID_DT9813, /* 16 2 4 4 1 +/- 10V */
+ DT9812_DEVID_DT9814 /* 24 2 0 0 1 +/- 10V */
+#endif
+} dt9812_devid_t;
+
+typedef enum {
+ DT9812_GAIN_0PT25 = 1,
+ DT9812_GAIN_0PT5 = 2,
+ DT9812_GAIN_1 = 4,
+ DT9812_GAIN_2 = 8,
+ DT9812_GAIN_4 = 16,
+ DT9812_GAIN_8 = 32,
+ DT9812_GAIN_16 = 64,
+} dt9812_gain_t;
+
+typedef enum {
+ DT9812_LEAST_USB_FIRMWARE_CMD_CODE = 0,
+ /* Write Flash memory */
+ DT9812_W_FLASH_DATA = 0,
+ /* Read Flash memory misc config info */
+ DT9812_R_FLASH_DATA = 1,
+
+ /*
+ * Register read/write commands for processor
+ */
+
+ /* Read a single byte of USB memory */
+ DT9812_R_SINGLE_BYTE_REG = 2,
+ /* Write a single byte of USB memory */
+ DT9812_W_SINGLE_BYTE_REG = 3,
+ /* Multiple Reads of USB memory */
+ DT9812_R_MULTI_BYTE_REG = 4,
+ /* Multiple Writes of USB memory */
+ DT9812_W_MULTI_BYTE_REG = 5,
+ /* Read, (AND) with mask, OR value, then write (single) */
+ DT9812_RMW_SINGLE_BYTE_REG = 6,
+ /* Read, (AND) with mask, OR value, then write (multiple) */
+ DT9812_RMW_MULTI_BYTE_REG = 7,
+
+ /*
+ * Register read/write commands for SMBus
+ */
+
+ /* Read a single byte of SMBus */
+ DT9812_R_SINGLE_BYTE_SMBUS = 8,
+ /* Write a single byte of SMBus */
+ DT9812_W_SINGLE_BYTE_SMBUS = 9,
+ /* Multiple Reads of SMBus */
+ DT9812_R_MULTI_BYTE_SMBUS = 10,
+ /* Multiple Writes of SMBus */
+ DT9812_W_MULTI_BYTE_SMBUS = 11,
+
+ /*
+ * Register read/write commands for a device
+ */
+
+ /* Read a single byte of a device */
+ DT9812_R_SINGLE_BYTE_DEV = 12,
+ /* Write a single byte of a device */
+ DT9812_W_SINGLE_BYTE_DEV = 13,
+ /* Multiple Reads of a device */
+ DT9812_R_MULTI_BYTE_DEV = 14,
+ /* Multiple Writes of a device */
+ DT9812_W_MULTI_BYTE_DEV = 15,
+
+ /* Not sure if we'll need this */
+ DT9812_W_DAC_THRESHOLD = 16,
+
+ /* Set interrupt on change mask */
+ DT9812_W_INT_ON_CHANGE_MASK = 17,
+
+ /* Write (or Clear) the CGL for the ADC */
+ DT9812_W_CGL = 18,
+ /* Multiple Reads of USB memory */
+ DT9812_R_MULTI_BYTE_USBMEM = 19,
+ /* Multiple Writes to USB memory */
+ DT9812_W_MULTI_BYTE_USBMEM = 20,
+
+ /* Issue a start command to a given subsystem */
+ DT9812_START_SUBSYSTEM = 21,
+ /* Issue a stop command to a given subsystem */
+ DT9812_STOP_SUBSYSTEM = 22,
+
+ /* calibrate the board using CAL_POT_CMD */
+ DT9812_CALIBRATE_POT = 23,
+ /* set the DAC FIFO size */
+ DT9812_W_DAC_FIFO_SIZE = 24,
+ /* Write or Clear the CGL for the DAC */
+ DT9812_W_CGL_DAC = 25,
+ /* Read a single value from a subsystem */
+ DT9812_R_SINGLE_VALUE_CMD = 26,
+ /* Write a single value to a subsystem */
+ DT9812_W_SINGLE_VALUE_CMD = 27,
+ /* Valid DT9812_USB_FIRMWARE_CMD_CODE's will be less than this number */
+ DT9812_MAX_USB_FIRMWARE_CMD_CODE,
+} dt9812_usb_firmware_cmd_t;
+
+typedef struct {
+ u16 numbytes;
+ u16 address;
+} dt9812_flash_data_t;
+
+#define DT9812_MAX_NUM_MULTI_BYTE_RDS \
+ ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(u8))
+
+typedef struct {
+ u8 count;
+ u8 address[DT9812_MAX_NUM_MULTI_BYTE_RDS];
+} dt9812_read_multi_t;
+
+typedef struct {
+ u8 address;
+ u8 value;
+} dt9812_write_byte_t;
+
+#define DT9812_MAX_NUM_MULTI_BYTE_WRTS \
+ ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(dt9812_write_byte_t))
+
+typedef struct {
+ u8 count;
+ dt9812_write_byte_t write[DT9812_MAX_NUM_MULTI_BYTE_WRTS];
+} dt9812_write_multi_t;
+
+typedef struct {
+ u8 address;
+ u8 and_mask;
+ u8 or_value;
+} dt9812_rmw_byte_t;
+
+#define DT9812_MAX_NUM_MULTI_BYTE_RMWS \
+ ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(dt9812_rmw_byte_t))
+
+typedef struct {
+ u8 count;
+ dt9812_rmw_byte_t rmw[DT9812_MAX_NUM_MULTI_BYTE_RMWS];
+} dt9812_rmw_multi_t;
+
+typedef struct dt9812_usb_cmd {
+
+ u32 cmd;
+ union {
+ dt9812_flash_data_t flash_data_info;
+ dt9812_read_multi_t read_multi_info;
+ dt9812_write_multi_t write_multi_info;
+ dt9812_rmw_multi_t rmw_multi_info;
+ } u;
+#if 0
+ WRITE_BYTE_INFO WriteByteInfo;
+ READ_BYTE_INFO ReadByteInfo;
+ WRITE_MULTI_INFO WriteMultiInfo;
+ READ_MULTI_INFO ReadMultiInfo;
+ RMW_BYTE_INFO RMWByteInfo;
+ RMW_MULTI_INFO RMWMultiInfo;
+ DAC_THRESHOLD_INFO DacThresholdInfo;
+ INT_ON_CHANGE_MASK_INFO IntOnChangeMaskInfo;
+ CGL_INFO CglInfo;
+ SUBSYSTEM_INFO SubsystemInfo;
+ CAL_POT_CMD CalPotCmd;
+ WRITE_DEV_BYTE_INFO WriteDevByteInfo;
+ READ_DEV_BYTE_INFO ReadDevByteInfo;
+ WRITE_DEV_MULTI_INFO WriteDevMultiInfo;
+ READ_DEV_MULTI_INFO ReadDevMultiInfo;
+ READ_SINGLE_VALUE_INFO ReadSingleValueInfo;
+ WRITE_SINGLE_VALUE_INFO WriteSingleValueInfo;
+#endif
+} dt9812_usb_cmd_t;
#define DT9812_NUM_SLOTS 16
+++ /dev/null
-#ifndef __DT9812_H__
-#define __DT9812_H__
-
-#define DT9812_DIAGS_BOARD_INFO_ADDR 0xFBFF
-#define DT9812_MAX_WRITE_CMD_PIPE_SIZE 32
-#define DT9812_MAX_READ_CMD_PIPE_SIZE 32
-
-/*
- * See Silican Laboratories C8051F020/1/2/3 manual
- */
-#define F020_SFR_P4 0x84
-#define F020_SFR_P1 0x90
-#define F020_SFR_P2 0xa0
-#define F020_SFR_P3 0xb0
-#define F020_SFR_AMX0CF 0xba
-#define F020_SFR_AMX0SL 0xbb
-#define F020_SFR_ADC0CF 0xbc
-#define F020_SFR_ADC0L 0xbe
-#define F020_SFR_ADC0H 0xbf
-#define F020_SFR_DAC0L 0xd2
-#define F020_SFR_DAC0H 0xd3
-#define F020_SFR_DAC0CN 0xd4
-#define F020_SFR_DAC1L 0xd5
-#define F020_SFR_DAC1H 0xd6
-#define F020_SFR_DAC1CN 0xd7
-#define F020_SFR_ADC0CN 0xe8
-
-#define F020_MASK_ADC0CF_AMP0GN0 0x01
-#define F020_MASK_ADC0CF_AMP0GN1 0x02
-#define F020_MASK_ADC0CF_AMP0GN2 0x04
-
-#define F020_MASK_ADC0CN_AD0EN 0x80
-#define F020_MASK_ADC0CN_AD0INT 0x20
-#define F020_MASK_ADC0CN_AD0BUSY 0x10
-
-#define F020_MASK_DACxCN_DACxEN 0x80
-
-typedef enum {
- /* A/D D/A DI DO CT */
- DT9812_DEVID_DT9812_10, /* 8 2 8 8 1 +/- 10V */
- DT9812_DEVID_DT9812_2PT5,/* 8 2 8 8 1 0-2.44V */
-#if 0
- DT9812_DEVID_DT9813, /* 16 2 4 4 1 +/- 10V */
- DT9812_DEVID_DT9814 /* 24 2 0 0 1 +/- 10V */
-#endif
-} dt9812_devid_t;
-
-typedef enum {
- DT9812_GAIN_0PT25 = 1,
- DT9812_GAIN_0PT5 = 2,
- DT9812_GAIN_1 = 4,
- DT9812_GAIN_2 = 8,
- DT9812_GAIN_4 = 16,
- DT9812_GAIN_8 = 32,
- DT9812_GAIN_16 = 64,
-} dt9812_gain_t;
-
-typedef enum {
- DT9812_LEAST_USB_FIRMWARE_CMD_CODE = 0,
- /* Write Flash memory */
- DT9812_W_FLASH_DATA = 0,
- /* Read Flash memory misc config info */
- DT9812_R_FLASH_DATA = 1,
-
- /*
- * Register read/write commands for processor
- */
-
- /* Read a single byte of USB memory */
- DT9812_R_SINGLE_BYTE_REG = 2,
- /* Write a single byte of USB memory */
- DT9812_W_SINGLE_BYTE_REG = 3,
- /* Multiple Reads of USB memory */
- DT9812_R_MULTI_BYTE_REG = 4,
- /* Multiple Writes of USB memory */
- DT9812_W_MULTI_BYTE_REG = 5,
- /* Read, (AND) with mask, OR value, then write (single) */
- DT9812_RMW_SINGLE_BYTE_REG = 6,
- /* Read, (AND) with mask, OR value, then write (multiple) */
- DT9812_RMW_MULTI_BYTE_REG = 7,
-
- /*
- * Register read/write commands for SMBus
- */
-
- /* Read a single byte of SMBus */
- DT9812_R_SINGLE_BYTE_SMBUS = 8,
- /* Write a single byte of SMBus */
- DT9812_W_SINGLE_BYTE_SMBUS = 9,
- /* Multiple Reads of SMBus */
- DT9812_R_MULTI_BYTE_SMBUS = 10,
- /* Multiple Writes of SMBus */
- DT9812_W_MULTI_BYTE_SMBUS = 11,
-
- /*
- * Register read/write commands for a device
- */
-
- /* Read a single byte of a device */
- DT9812_R_SINGLE_BYTE_DEV = 12,
- /* Write a single byte of a device */
- DT9812_W_SINGLE_BYTE_DEV = 13,
- /* Multiple Reads of a device */
- DT9812_R_MULTI_BYTE_DEV = 14,
- /* Multiple Writes of a device */
- DT9812_W_MULTI_BYTE_DEV = 15,
-
- /* Not sure if we'll need this */
- DT9812_W_DAC_THRESHOLD = 16,
-
- /* Set interrupt on change mask */
- DT9812_W_INT_ON_CHANGE_MASK = 17,
-
- /* Write (or Clear) the CGL for the ADC */
- DT9812_W_CGL = 18,
- /* Multiple Reads of USB memory */
- DT9812_R_MULTI_BYTE_USBMEM = 19,
- /* Multiple Writes to USB memory */
- DT9812_W_MULTI_BYTE_USBMEM = 20,
-
- /* Issue a start command to a given subsystem */
- DT9812_START_SUBSYSTEM = 21,
- /* Issue a stop command to a given subsystem */
- DT9812_STOP_SUBSYSTEM = 22,
-
- /* calibrate the board using CAL_POT_CMD */
- DT9812_CALIBRATE_POT = 23,
- /* set the DAC FIFO size */
- DT9812_W_DAC_FIFO_SIZE = 24,
- /* Write or Clear the CGL for the DAC */
- DT9812_W_CGL_DAC = 25,
- /* Read a single value from a subsystem */
- DT9812_R_SINGLE_VALUE_CMD = 26,
- /* Write a single value to a subsystem */
- DT9812_W_SINGLE_VALUE_CMD = 27,
- /* Valid DT9812_USB_FIRMWARE_CMD_CODE's will be less than this number */
- DT9812_MAX_USB_FIRMWARE_CMD_CODE,
-} dt9812_usb_firmware_cmd_t;
-
-typedef struct {
- u16 numbytes;
- u16 address;
-} dt9812_flash_data_t;
-
-#define DT9812_MAX_NUM_MULTI_BYTE_RDS \
- ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(u8))
-
-typedef struct {
- u8 count;
- u8 address[DT9812_MAX_NUM_MULTI_BYTE_RDS];
-} dt9812_read_multi_t;
-
-typedef struct {
- u8 address;
- u8 value;
-} dt9812_write_byte_t;
-
-#define DT9812_MAX_NUM_MULTI_BYTE_WRTS \
- ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(dt9812_write_byte_t))
-
-typedef struct {
- u8 count;
- dt9812_write_byte_t write[DT9812_MAX_NUM_MULTI_BYTE_WRTS];
-} dt9812_write_multi_t;
-
-typedef struct {
- u8 address;
- u8 and_mask;
- u8 or_value;
-} dt9812_rmw_byte_t;
-
-#define DT9812_MAX_NUM_MULTI_BYTE_RMWS \
- ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(dt9812_rmw_byte_t))
-
-typedef struct {
- u8 count;
- dt9812_rmw_byte_t rmw[DT9812_MAX_NUM_MULTI_BYTE_RMWS];
-} dt9812_rmw_multi_t;
-
-typedef struct dt9812_usb_cmd {
-
- u32 cmd;
- union {
- dt9812_flash_data_t flash_data_info;
- dt9812_read_multi_t read_multi_info;
- dt9812_write_multi_t write_multi_info;
- dt9812_rmw_multi_t rmw_multi_info;
- } u;
-#if 0
- WRITE_BYTE_INFO WriteByteInfo;
- READ_BYTE_INFO ReadByteInfo;
- WRITE_MULTI_INFO WriteMultiInfo;
- READ_MULTI_INFO ReadMultiInfo;
- RMW_BYTE_INFO RMWByteInfo;
- RMW_MULTI_INFO RMWMultiInfo;
- DAC_THRESHOLD_INFO DacThresholdInfo;
- INT_ON_CHANGE_MASK_INFO IntOnChangeMaskInfo;
- CGL_INFO CglInfo;
- SUBSYSTEM_INFO SubsystemInfo;
- CAL_POT_CMD CalPotCmd;
- WRITE_DEV_BYTE_INFO WriteDevByteInfo;
- READ_DEV_BYTE_INFO ReadDevByteInfo;
- WRITE_DEV_MULTI_INFO WriteDevMultiInfo;
- READ_DEV_MULTI_INFO ReadDevMultiInfo;
- READ_SINGLE_VALUE_INFO ReadSingleValueInfo;
- WRITE_SINGLE_VALUE_INFO WriteSingleValueInfo;
-#endif
-} dt9812_usb_cmd_t;
-
-#endif
projects / linux-2.6-omap-h63xx.git / commitdiff