[PATCH] ata_piix: allow 01b MAP for both ICH6M and ICH7M

ICH7M was separated from ICH6M to allow undocumented MAP value 01b
which was spotted on an ASUS notebook.  However, there is also
notebooks with MAP value 01b on ICH6M.  This patch re-merges ICH6M and
ICH7M entries and allows MAP value 01b for both.

This problem has been reported and initial patch provided by Jonathan
Dieter.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Jonathan Dieter <jdieter@gmail.com>
Cc: Tom Deblauwe <tom.deblauwe@telenet.be>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 4fad8d2382ca8bf7abcea2c5adde2497c59109b0..8385387c49cd4b8fcc7c5aa7093721d4e172cb9a 100644 (file)
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -126,8 +126,7 @@ enum {
        ich6_sata               = 7,
        ich6_sata_ahci          = 8,
        ich6m_sata_ahci         = 9,
-       ich7m_sata_ahci         = 10,
-       ich8_sata_ahci          = 11,
+       ich8_sata_ahci          = 10,
 
        /* constants for mapping table */
        P0                      = 0,  /* port 0 */
@@ -228,7 +227,7 @@ static const struct pci_device_id piix_pci_tbl[] = {
        /* 82801GB/GR/GH (ICH7, identical to ICH6) */
        { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
        /* 2801GBM/GHM (ICH7M, identical to ICH6M) */
-       { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich7m_sata_ahci },
+       { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
        /* Enterprise Southbridge 2 (where's the datasheet?) */
        { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
        /* SATA Controller 1 IDE (ICH8, no datasheet yet) */
@@ -400,23 +399,10 @@ static const struct piix_map_db ich6m_map_db = {
        .mask = 0x3,
        .port_enable = 0x5,
        .present_shift = 4,
-       .map = {
-               /* PM   PS   SM   SS       MAP */
-               {  P0,  P2,  RV,  RV }, /* 00b */
-               {  RV,  RV,  RV,  RV },
-               {  P0,  P2, IDE, IDE }, /* 10b */
-               {  RV,  RV,  RV,  RV },
-       },
-};
-
-static const struct piix_map_db ich7m_map_db = {
-       .mask = 0x3,
-       .port_enable = 0x5,
-       .present_shift = 4,
 
        /* Map 01b isn't specified in the doc but some notebooks use
-        * it anyway.  ATM, the only case spotted carries subsystem ID
-        * 1025:0107.  This is the only difference from ich6m.
+        * it anyway.  MAP 01b have been spotted on both ICH6M and
+        * ICH7M.
         */
        .map = {
                /* PM   PS   SM   SS       MAP */
@@ -446,7 +432,6 @@ static const struct piix_map_db *piix_map_db_table[] = {
        [ich6_sata]             = &ich6_map_db,
        [ich6_sata_ahci]        = &ich6_map_db,
        [ich6m_sata_ahci]       = &ich6m_map_db,
-       [ich7m_sata_ahci]       = &ich7m_map_db,
        [ich8_sata_ahci]        = &ich8_map_db,
 };
 
@@ -557,19 +542,7 @@ static struct ata_port_info piix_port_info[] = {
                .port_ops       = &piix_sata_ops,
        },
 
-       /* ich7m_sata_ahci: 10 */
-       {
-               .sht            = &piix_sht,
-               .flags          = ATA_FLAG_SATA |
-                                 PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR |
-                                 PIIX_FLAG_AHCI,
-               .pio_mask       = 0x1f, /* pio0-4 */
-               .mwdma_mask     = 0x07, /* mwdma0-2 */
-               .udma_mask      = 0x7f, /* udma0-6 */
-               .port_ops       = &piix_sata_ops,
-       },
-
-       /* ich8_sata_ahci: 11 */
+       /* ich8_sata_ahci: 10 */
        {
                .sht            = &piix_sht,
                .flags          = ATA_FLAG_SATA |