V4L/DVB (8114): cx18: Improve Raptor card audio input routing defintions

cx18: Improved Raptor card audio input routing defintions, so that muxer values
matched cx18_gpio() values for tuner, line in 1, and radio and added LED
indication of selected audio input.  Audio line in 2 doesn't work as it uses
the not yet supported 2nd I2S port.  Tuner/FM Radio AF is mono until SIF
support is fixed.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index 456fc924cf8cf6b6da62bc44f61314ee5f530f15..0b892aacabef2aefe185a67a919515c5835094a6 100644 (file)
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -261,14 +261,14 @@ static const struct cx18_card cx18_card_cnxt_raptor_pal = {
                { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
        },
        .audio_inputs = {
-               { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 1 },
-               { CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL, 0 },
-               { CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL, 0 },
+               { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 0 },
+               { CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL, 1 },
+               { CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL, 1 },
        },
        .tuners = {
                { .std = V4L2_STD_PAL_SECAM, .tuner = TUNER_PHILIPS_FM1216ME_MK3 },
        },
-       .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 0 },
+       .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 2 },
        .ddr = {
                /* MT 46V16M16 memory */
                .chip_config = 0x50306,
@@ -278,9 +278,12 @@ static const struct cx18_card cx18_card_cnxt_raptor_pal = {
                .tune_lane = 0,
                .initial_emrs = 0,
        },
-       .gpio_init.initial_value = 0x02,
-       .gpio_init.direction = 0x02,
-       .gpio_audio_input  = { .mask = 0x02, .tuner  = 0x02, .linein = 0x00 },
+       .gpio_init.initial_value = 0x1002,
+       .gpio_init.direction = 0xf002,
+       .gpio_audio_input = { .mask   = 0xf002,
+                             .tuner  = 0x1002,   /* LED D1  Tuner AF  */
+                             .linein = 0x2000,   /* LED D2  Line In 1 */
+                             .radio  = 0x4002 }, /* LED D3  Tuner AF  */
        .pci_list = cx18_pci_cnxt_raptor_pal,
        .i2c = &cx18_i2c_std,
 };