[ARM] 5278/1: i2c-pxa fast mode support

Add fast_mode option to i2c_pxa_platform_data and use it to set the
ICR_FM bit appropriately when i2c_pxa_reset is called. Parameter
called fast_mode rather than frequency as this driver is also used
for the i2c_pxa_pwr bus which has different normal and fast frequencies.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-pxa/include/mach/i2c.h b/arch/arm/mach-pxa/include/mach/i2c.h
index 897e71752177ad91e78bbca6374ea2f5cff08f91..1a9f65e6ec0f043a4e45ff58c0220db5194e737d 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/i2c.h
+++ b/arch/arm/mach-pxa/include/mach/i2c.h
@@ -65,7 +65,8 @@ struct i2c_pxa_platform_data {
        unsigned int            slave_addr;
        struct i2c_slave_client *slave;
        unsigned int            class;
-       int                     use_pio;
+       unsigned int            use_pio :1;
+       unsigned int            fast_mode :1;
 };
 
 extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);

diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
index 12288ca3cbb2022ee3dc2a45ee375a6be8096374..772c67635e236b6246c581622660a5cb5352206f 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -448,6 +448,7 @@
 #define ICR_ALDIE      (1 << 12)          /* enable arbitration interrupt */
 #define ICR_SADIE      (1 << 13)          /* slave address detected int enable */
 #define ICR_UR         (1 << 14)          /* unit reset */
+#define ICR_FM         (1 << 15)          /* fast mode */
 
 #define ISR_RWM                (1 << 0)           /* read/write mode */
 #define ISR_ACKNAK     (1 << 1)           /* ack/nak status */

diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 518b57c795c819cb41a0bb9b012de3011eb2c50e..8b38ed0379d5aa9fa301f33e7cf0f70151eaf85b 100644 (file)
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -66,7 +66,8 @@ struct pxa_i2c {
        unsigned long           iosize;
 
        int                     irq;
-       int                     use_pio;
+       unsigned int            use_pio :1;
+       unsigned int            fast_mode :1;
 };
 
 #define _IBMR(i2c)     ((i2c)->reg_base + (0x0 << (i2c)->reg_shift))
@@ -366,7 +367,7 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c)
        writel(i2c->slave_addr, _ISAR(i2c));
 
        /* set control register values */
-       writel(I2C_ICR_INIT, _ICR(i2c));
+       writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c));
 
 #ifdef CONFIG_I2C_PXA_SLAVE
        dev_info(&i2c->adap.dev, "Enabling slave mode\n");
@@ -1010,6 +1011,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
        if (plat) {
                i2c->adap.class = plat->class;
                i2c->use_pio = plat->use_pio;
+               i2c->fast_mode = plat->fast_mode;
        }
 
        if (i2c->use_pio) {