]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[ARM] pxa: update pxa i2c driver to use clk support
authorRussell King <rmk@dyn-67.arm.linux.org.uk>
Mon, 20 Aug 2007 09:19:10 +0000 (10:19 +0100)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Fri, 12 Oct 2007 20:14:58 +0000 (21:14 +0100)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
drivers/i2c/busses/i2c-pxa.c

index bb5466b27b59ab6796a28788ed2b3575274f9538..00fad11733ad09f4ea92370a2722d832ef426023 100644 (file)
@@ -31,6 +31,8 @@
 #include <linux/interrupt.h>
 #include <linux/i2c-pxa.h>
 #include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
@@ -48,6 +50,7 @@ struct pxa_i2c {
        unsigned int            slave_addr;
 
        struct i2c_adapter      adap;
+       struct clk              *clk;
 #ifdef CONFIG_I2C_PXA_SLAVE
        struct i2c_slave_client *slave;
 #endif
@@ -869,6 +872,12 @@ static int i2c_pxa_probe(struct platform_device *dev)
 
        sprintf(i2c->adap.name, "pxa_i2c-i2c.%u", dev->id);
 
+       i2c->clk = clk_get(&dev->dev, "I2CCLK");
+       if (IS_ERR(i2c->clk)) {
+               ret = PTR_ERR(i2c->clk);
+               goto eclk;
+       }
+
        i2c->reg_base = ioremap(res->start, res_len(res));
        if (!i2c->reg_base) {
                ret = -EIO;
@@ -889,22 +898,19 @@ static int i2c_pxa_probe(struct platform_device *dev)
        }
 #endif
 
+       clk_enable(i2c->clk);
+#ifdef CONFIG_PXA27x
        switch (dev->id) {
        case 0:
-#ifdef CONFIG_PXA27x
                pxa_gpio_mode(GPIO117_I2CSCL_MD);
                pxa_gpio_mode(GPIO118_I2CSDA_MD);
-#endif
-               pxa_set_cken(CKEN_I2C, 1);
                break;
-#ifdef CONFIG_PXA27x
        case 1:
                local_irq_disable();
                PCFR |= PCFR_PI2CEN;
                local_irq_enable();
-               pxa_set_cken(CKEN_PWRI2C, 1);
-#endif
        }
+#endif
 
        ret = request_irq(irq, i2c_pxa_handler, IRQF_DISABLED,
                          i2c->adap.name, i2c);
@@ -948,19 +954,18 @@ static int i2c_pxa_probe(struct platform_device *dev)
 eadapt:
        free_irq(irq, i2c);
 ereqirq:
-       switch (dev->id) {
-       case 0:
-               pxa_set_cken(CKEN_I2C, 0);
-               break;
+       clk_disable(i2c->clk);
+
 #ifdef CONFIG_PXA27x
-       case 1:
-               pxa_set_cken(CKEN_PWRI2C, 0);
+       if (dev->id == 1) {
                local_irq_disable();
                PCFR &= ~PCFR_PI2CEN;
                local_irq_enable();
-#endif
        }
+#endif
 eremap:
+       clk_put(i2c->clk);
+eclk:
        kfree(i2c);
 emalloc:
        release_mem_region(res->start, res_len(res));
@@ -975,18 +980,18 @@ static int i2c_pxa_remove(struct platform_device *dev)
 
        i2c_del_adapter(&i2c->adap);
        free_irq(i2c->irq, i2c);
-       switch (dev->id) {
-       case 0:
-               pxa_set_cken(CKEN_I2C, 0);
-               break;
+
+       clk_disable(i2c->clk);
+       clk_put(i2c->clk);
+
 #ifdef CONFIG_PXA27x
-       case 1:
-               pxa_set_cken(CKEN_PWRI2C, 0);
+       if (dev->id == 1) {
                local_irq_disable();
                PCFR &= ~PCFR_PI2CEN;
                local_irq_enable();
-#endif
        }
+#endif
+
        release_mem_region(i2c->iobase, i2c->iosize);
        kfree(i2c);