#include <linux/delay.h>
#include <linux/workqueue.h>
#include <linux/input.h>
+#include <linux/err.h>
+#include <linux/clk.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
&h4_lcd_device,
};
+/* 2420 Sysboot setup (2430 is different) */
+static u32 get_sysboot_value(void)
+{
+ return (omap_readl(OMAP242X_CONTROL_STATUS) & 0xFFF);
+}
+
+/* FIXME: This function should be moved to some other file, gpmc.c? */
+
+/* H4-2420's always used muxed mode, H4-2422's always use non-muxed
+ *
+ * Note: OMAP-GIT doesn't correctly do is_cpu_omap2422 and is_cpu_omap2423
+ * correctly. The macro needs to look at production_id not just hawkeye.
+ */
+static u32 is_gpmc_muxed(void)
+{
+ u32 mux;
+ mux = get_sysboot_value();
+ if ((mux & 0xF) == 0xd)
+ return 1; /* NAND config (could be either) */
+ if (mux & 0x2) /* if mux'ed */
+ return 1;
+ else
+ return 0;
+}
+
+#define SMC91X_CS 1
+
static inline void __init h4_init_smc91x(void)
{
+ int eth_cs;
+ unsigned int muxed, rate;
+ struct clk *l3ck;
+
+ eth_cs = SMC91X_CS;
+
+ l3ck = clk_get(NULL, "core_l3_ck");
+ if (IS_ERR(l3ck))
+ rate = 100000000;
+ else
+ rate = clk_get_rate(l3ck);
+
+ if (is_gpmc_muxed())
+ muxed = 0x200;
+ else
+ muxed = 0;
+
/* Make sure CS1 timings are correct */
- GPMC_CONFIG1_1 = 0x00011200;
- GPMC_CONFIG2_1 = 0x001f1f01;
- GPMC_CONFIG3_1 = 0x00080803;
- GPMC_CONFIG4_1 = 0x1c091c09;
- GPMC_CONFIG5_1 = 0x041f1f1f;
- GPMC_CONFIG6_1 = 0x000004c4;
- GPMC_CONFIG7_1 = 0x00000f40 | (0x08000000 >> 24);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1,
+ 0x00011000 | muxed);
+
+ if (rate >= 160000000) {
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
+ } else if (rate >= 130000000) {
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
+ } else {/* rate = 100000000 */
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
+ }
+
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG7,
+ 0x00000f40 | (0x08000000 >> 24));
udelay(100);
omap_cfg_reg(M15_24XX_GPIO92);