This patch has added MTD device support for Cobalt.
Moreover, removes old type FlashROM support.
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
obj-y := irq.o reset.o setup.o
obj-$(CONFIG_EARLY_PRINTK) += console.o
+obj-$(CONFIG_MTD_PHYSMAP) += mtd.o
EXTRA_AFLAGS := $(CFLAGS)
--- /dev/null
+/*
+ * Registration of Cobalt MTD device.
+ *
+ * Copyright (C) 2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+static struct mtd_partition cobalt_mtd_partitions[] = {
+ {
+ .name = "Colo",
+ .offset = 0x0,
+ .size = 0x80000,
+ },
+};
+
+static struct physmap_flash_data cobalt_flash_data = {
+ .width = 1,
+ .nr_parts = 1,
+ .parts = cobalt_mtd_partitions,
+};
+
+static struct resource cobalt_mtd_resource = {
+ .start = 0x1fc00000,
+ .end = 0x1fc7ffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device cobalt_mtd = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &cobalt_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &cobalt_mtd_resource,
+};
+
+static int __init cobalt_mtd_init(void)
+{
+ platform_device_register(&cobalt_mtd);
+
+ return 0;
+}
+
+module_init(cobalt_mtd_init);
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20
-# Sun Feb 18 21:27:37 2007
+# Mon Feb 19 14:51:58 2007
#
CONFIG_MIPS=y
#
# Memory Technology Devices (MTD)
#
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_CAFE is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
break;
}
-// Erase the flash
-
- case FLASH_Erase:{
-
- int ctr = 0;
-
- if ( !capable(CAP_SYS_ADMIN) ) return -EPERM;
-
- pr_info(LCD "Erasing Flash\n");
-
- // Chip Erase Sequence
- WRITE_FLASH(kFlash_Addr1, kFlash_Data1);
- WRITE_FLASH(kFlash_Addr2, kFlash_Data2);
- WRITE_FLASH(kFlash_Addr1, kFlash_Erase3);
- WRITE_FLASH(kFlash_Addr1, kFlash_Data1);
- WRITE_FLASH(kFlash_Addr2, kFlash_Data2);
- WRITE_FLASH(kFlash_Addr1, kFlash_Erase6);
-
- while ((!dqpoll(0x00000000, 0xFF))
- && (!timeout(0x00000000))) {
- ctr++;
- }
-
- if (READ_FLASH(0x07FFF0) == 0xFF) {
- pr_info(LCD "Erase Successful\n");
- } else if (timeout) {
- pr_info(LCD "Erase Timed Out\n");
- }
-
- break;
- }
-
-// burn the flash
-
- case FLASH_Burn:{
-
- volatile unsigned long burn_addr;
- unsigned long flags;
- unsigned int i, index;
- unsigned char *rom;
-
-
- struct lcd_display display;
-
- if ( !capable(CAP_SYS_ADMIN) ) return -EPERM;
-
- if (copy_from_user
- (&display, (struct lcd_display *) arg,
- sizeof(struct lcd_display)))
- return -EFAULT;
- rom = kmalloc((128), GFP_ATOMIC);
- if (rom == NULL) {
- printk(KERN_ERR LCD "kmalloc() failed in %s\n",
- __FUNCTION__);
- return -ENOMEM;
- }
-
- pr_info(LCD "Starting Flash burn\n");
- for (i = 0; i < FLASH_SIZE; i = i + 128) {
-
- if (copy_from_user
- (rom, display.RomImage + i, 128)) {
- kfree(rom);
- return -EFAULT;
- }
- burn_addr = kFlashBase + i;
- spin_lock_irqsave(&lcd_lock, flags);
- for (index = 0; index < (128); index++) {
-
- WRITE_FLASH(kFlash_Addr1,
- kFlash_Data1);
- WRITE_FLASH(kFlash_Addr2,
- kFlash_Data2);
- WRITE_FLASH(kFlash_Addr1,
- kFlash_Prog);
- *((volatile unsigned char *)burn_addr) =
- (volatile unsigned char) rom[index];
-
- while ((!dqpoll (burn_addr,
- (volatile unsigned char)
- rom[index])) &&
- (!timeout(burn_addr))) { }
- burn_addr++;
- }
- spin_unlock_irqrestore(&lcd_lock, flags);
- if (* ((volatile unsigned char *)
- (burn_addr - 1)) ==
- (volatile unsigned char)
- rom[index - 1]) {
- } else if (timeout) {
- pr_info(LCD "Flash burn timed out\n");
- }
-
-
- }
- kfree(rom);
-
- pr_info(LCD "Flash successfully burned\n");
-
- break;
- }
-
-// read the flash all at once
-
- case FLASH_Read:{
-
- unsigned char *user_bytes;
- volatile unsigned long read_addr;
- unsigned int i;
-
- user_bytes =
- &(((struct lcd_display *) arg)->RomImage[0]);
-
- if (!access_ok
- (VERIFY_WRITE, user_bytes, FLASH_SIZE))
- return -EFAULT;
-
- pr_info(LCD "Reading Flash");
- for (i = 0; i < FLASH_SIZE; i++) {
- unsigned char tmp_byte;
- read_addr = kFlashBase + i;
- tmp_byte =
- *((volatile unsigned char *)
- read_addr);
- if (__put_user(tmp_byte, &user_bytes[i]))
- return -EFAULT;
- }
-
-
- break;
- }
-
default:
return -EINVAL;
misc_deregister(&lcd_dev);
}
-//
-// Function: dqpoll
-//
-// Description: Polls the data lines to see if the flash is busy
-//
-// In: address, byte data
-//
-// Out: 0 = busy, 1 = write or erase complete
-//
-//
-
-static int dqpoll(volatile unsigned long address, volatile unsigned char data)
-{
- volatile unsigned char dq7;
-
- dq7 = data & 0x80;
-
- return ((READ_FLASH(address) & 0x80) == dq7);
-}
-
-//
-// Function: timeout
-//
-// Description: Checks to see if erase or write has timed out
-// By polling dq5
-//
-// In: address
-//
-//
-// Out: 0 = not timed out, 1 = timed out
-
-static int timeout(volatile unsigned long address)
-{
- return (READ_FLASH(address) & 0x20) == 0x20;
-}
-
module_init(lcd_init);
module_exit(lcd_exit);
// function headers
-static int dqpoll(volatile unsigned long, volatile unsigned char );
-static int timeout(volatile unsigned long);
-
#define LCD_CHARS_PER_LINE 40
-#define FLASH_SIZE 524288
#define MAX_IDLE_TIME 120
struct lcd_display {
#define LCDTimeoutValue 0xfff
-// Flash definitions AMD 29F040
-#define kFlashBase 0x0FC00000
-
-#define kFlash_Addr1 0x5555
-#define kFlash_Addr2 0x2AAA
-#define kFlash_Data1 0xAA
-#define kFlash_Data2 0x55
-#define kFlash_Prog 0xA0
-#define kFlash_Erase3 0x80
-#define kFlash_Erase6 0x10
-#define kFlash_Read 0xF0
-
-#define kFlash_ID 0x90
-#define kFlash_VenAddr 0x00
-#define kFlash_DevAddr 0x01
-#define kFlash_VenID 0x01
-#define kFlash_DevID 0xA4 // 29F040
-//#define kFlash_DevID 0xAD // 29F016
-
-
// Macros
#define LCDWriteData(x) outl((x << 24), kLCD_DR)
#define WRITE_GAL(x,y) outl(y, 0x04000000 | (x))
#define BusyCheck() while ((LCDReadInst & 0x80) == 0x80)
-#define WRITE_FLASH(x,y) outb((char)y, kFlashBase | (x))
-#define READ_FLASH(x) (inb(kFlashBase | (x)))
-
/*
// Button defs
#define BUTTON_Read 50
-// Flash command codes
-#define FLASH_Erase 60
-#define FLASH_Burn 61
-#define FLASH_Read 62
-
// Ethernet LINK check hackaroo
#define LINK_Check 90
projects / linux-2.6-omap-h63xx.git / commitdiff