Blackfin arch: Fix bug - make ksz8893m driver available when bfin_mac is enabled

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 0e175342112e45340d72fbe558234d97840027a2..b044de49ecf0a9439ce3c9a88d37bb6df84f898d 100644 (file)
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -113,7 +113,6 @@ static struct platform_device bfin_mac_device = {
        .name = "bfin_mac",
        .dev.platform_data = &bfin_mii_bus,
 };
-#endif
 
 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 static struct dsa_platform_data ksz8893m_switch_data = {
@@ -132,6 +131,7 @@ static struct platform_device ksz8893m_switch_device = {
        .dev.platform_data = &ksz8893m_switch_data,
 };
 #endif
+#endif
 
 #if defined(CONFIG_MTD_M25P80) \
        || defined(CONFIG_MTD_M25P80_MODULE)
@@ -171,6 +171,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #if defined(CONFIG_NET_DSA_KSZ8893M) \
        || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 /* SPI SWITCH CHIP */
@@ -179,6 +180,7 @@ static struct bfin5xx_spi_chip spi_switch_info = {
        .bits_per_word = 8,
 };
 #endif
+#endif
 
 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
 static struct bfin5xx_spi_chip spi_mmc_chip_info = {
@@ -259,6 +261,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #if defined(CONFIG_NET_DSA_KSZ8893M) \
        || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
        {
@@ -271,6 +274,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                .mode = SPI_MODE_3,
        },
 #endif
+#endif
 
 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
        {
@@ -630,11 +634,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
        &bfin_mii_bus,
        &bfin_mac_device,
-#endif
-
 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
        &ksz8893m_switch_device,
 #endif
+#endif
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
        &bfin_spi0_device,