/* ------------------------------------------------------------------ */
/* board config info */
+/* If radio_type !=UNSET, radio_addr should be specified
+ */
+
struct saa7134_board saa7134_boards[] = {
[SAA7134_BOARD_UNKNOWN] = {
.name = "UNKNOWN/GENERIC",
.tuner_type = TUNER_PHILIPS_TD1316, /* untested */
.radio_type = TUNER_TEA5767, /* untested */
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
+ .radio_addr = 0x60,
.tda9887_conf = TDA9887_PRESENT,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
return 0;
}
+static void saa7134_tuner_setup(struct saa7134_dev *dev)
+{
+ struct tuner_setup tun_setup;
+ unsigned int mode_mask = T_RADIO |
+ T_ANALOG_TV |
+ T_DIGITAL_TV;
+
+ memset(&tun_setup, 0, sizeof(tun_setup));
+ tun_setup.tuner_callback = saa7134_tuner_callback;
+
+ if (saa7134_boards[dev->board].radio_type != UNSET) {
+ tun_setup.type = saa7134_boards[dev->board].radio_type;
+ tun_setup.addr = saa7134_boards[dev->board].radio_addr;
+
+ tun_setup.mode_mask = T_RADIO;
+
+ saa7134_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
+ mode_mask &= ~T_RADIO;
+ }
+
+ if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type != UNSET)) {
+ tun_setup.type = dev->tuner_type;
+ tun_setup.addr = dev->tuner_addr;
+ tun_setup.config = saa7134_boards[dev->board].tuner_config;
+ tun_setup.tuner_callback = saa7134_tuner_callback;
+
+ tun_setup.mode_mask = mode_mask;
+
+ saa7134_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
+ }
+
+ if (dev->tda9887_conf) {
+ struct v4l2_priv_tun_config tda9887_cfg;
+
+ tda9887_cfg.tuner = TUNER_TDA9887;
+ tda9887_cfg.priv = &dev->tda9887_conf;
+
+ saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG,
+ &tda9887_cfg);
+ }
+
+ if (dev->tuner_type == TUNER_XC2028) {
+ struct v4l2_priv_tun_config xc2028_cfg;
+ struct xc2028_ctrl ctl;
+
+ memset(&xc2028_cfg, 0, sizeof(ctl));
+ memset(&ctl, 0, sizeof(ctl));
+
+ ctl.fname = XC2028_DEFAULT_FIRMWARE;
+ ctl.max_len = 64;
+
+ switch (dev->board) {
+ case SAA7134_BOARD_AVERMEDIA_A16D:
+ ctl.demod = XC3028_FE_ZARLINK456;
+ break;
+ default:
+ ctl.demod = XC3028_FE_OREN538;
+ ctl.mts = 1;
+ }
+
+ xc2028_cfg.tuner = TUNER_XC2028;
+ xc2028_cfg.priv = &ctl;
+
+ saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg);
+ }
+}
+
/* stuff which needs working i2c */
int saa7134_board_init2(struct saa7134_dev *dev)
{
unsigned char buf;
int board;
- struct tuner_setup tun_setup;
- tun_setup.config = 0;
- tun_setup.tuner_callback = saa7134_tuner_callback;
+
+ dev->tuner_type = saa7134_boards[dev->board].tuner_type;
+ dev->tuner_addr = saa7134_boards[dev->board].tuner_addr;
switch (dev->board) {
case SAA7134_BOARD_BMK_MPEX_NOTUNER:
case SAA7134_BOARD_BMK_MPEX_TUNER:
dev->i2c_client.addr = 0x60;
- board = (i2c_master_recv(&dev->i2c_client,&buf,0) < 0)
+ board = (i2c_master_recv(&dev->i2c_client, &buf, 0) < 0)
? SAA7134_BOARD_BMK_MPEX_NOTUNER
: SAA7134_BOARD_BMK_MPEX_TUNER;
if (board == dev->board)
saa7134_boards[dev->board].name);
dev->tuner_type = saa7134_boards[dev->board].tuner_type;
- if (TUNER_ABSENT != dev->tuner_type) {
- tun_setup.mode_mask = T_RADIO |
- T_ANALOG_TV |
- T_DIGITAL_TV;
- tun_setup.type = dev->tuner_type;
- tun_setup.addr = ADDR_UNSET;
- tun_setup.tuner_callback = saa7134_tuner_callback;
-
- saa7134_i2c_call_clients(dev,
- TUNER_SET_TYPE_ADDR,
- &tun_setup);
- }
break;
case SAA7134_BOARD_MD7134:
- {
+ {
u8 subaddr;
u8 data[3];
int ret, tuner_t;
}
printk(KERN_INFO "%s Tuner type is %d\n", dev->name, dev->tuner_type);
- if (dev->tuner_type == TUNER_PHILIPS_FMD1216ME_MK3) {
- struct v4l2_priv_tun_config tda9887_cfg;
-
- tda9887_cfg.tuner = TUNER_TDA9887;
- tda9887_cfg.priv = &dev->tda9887_conf;
-
- dev->tda9887_conf = TDA9887_PRESENT |
- TDA9887_PORT1_ACTIVE |
- TDA9887_PORT2_ACTIVE;
-
- saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG,
- &tda9887_cfg);
- }
-
- tun_setup.mode_mask = T_RADIO |
- T_ANALOG_TV |
- T_DIGITAL_TV;
- tun_setup.type = dev->tuner_type;
- tun_setup.addr = ADDR_UNSET;
-
- saa7134_i2c_call_clients(dev,
- TUNER_SET_TYPE_ADDR, &tun_setup);
- }
break;
+ }
case SAA7134_BOARD_PHILIPS_EUROPA:
if (dev->autodetected && (dev->eedata[0x41] == 0x1c)) {
/* Reconfigure board as Snake reference design */
}
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
case SAA7134_BOARD_ASUS_EUROPA2_HYBRID:
+ {
+
/* The Philips EUROPA based hybrid boards have the tuner connected through
* the channel decoder. We have to make it transparent to find it
*/
- {
u8 data[] = { 0x07, 0x02};
struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
i2c_transfer(&dev->i2c_adap, &msg, 1);
- tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
- tun_setup.type = dev->tuner_type;
- tun_setup.addr = dev->tuner_addr;
-
- saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR,&tun_setup);
- }
break;
+ }
case SAA7134_BOARD_PHILIPS_TIGER:
case SAA7134_BOARD_PHILIPS_TIGER_S:
- {
+ {
u8 data[] = { 0x3c, 0x33, 0x60};
struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
- if(dev->autodetected && (dev->eedata[0x49] == 0x50)) {
+ if (dev->autodetected && (dev->eedata[0x49] == 0x50)) {
dev->board = SAA7134_BOARD_PHILIPS_TIGER_S;
printk(KERN_INFO "%s: Reconfigured board as %s\n",
dev->name, saa7134_boards[dev->board].name);
}
- if(dev->board == SAA7134_BOARD_PHILIPS_TIGER_S) {
- tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
- tun_setup.type = TUNER_PHILIPS_TDA8290;
- tun_setup.addr = 0x4b;
- tun_setup.config = 2;
+ if (dev->board == SAA7134_BOARD_PHILIPS_TIGER_S) {
+ dev->tuner_type = TUNER_PHILIPS_TDA8290;
+
+ saa7134_tuner_setup(dev);
- saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR,&tun_setup);
data[2] = 0x68;
+ i2c_transfer(&dev->i2c_adap, &msg, 1);
+
+ /* Tuner setup is handled before I2C transfer.
+ Due to that, there's no need to do it later
+ */
+ return 0;
}
i2c_transfer(&dev->i2c_adap, &msg, 1);
- }
break;
+ }
case SAA7134_BOARD_HAUPPAUGE_HVR1110:
hauppauge_eeprom(dev, dev->eedata+0x80);
/* break intentionally omitted */
case SAA7134_BOARD_AVERMEDIA_SUPER_007:
case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
case SAA7134_BOARD_CREATIX_CTX953:
+ {
/* this is a hybrid board, initialize to analog mode
* and configure firmware eeprom address
*/
- {
u8 data[] = { 0x3c, 0x33, 0x60};
struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
i2c_transfer(&dev->i2c_adap, &msg, 1);
- }
break;
+ }
case SAA7134_BOARD_FLYDVB_TRIO:
- {
+ {
u8 data[] = { 0x3c, 0x33, 0x62};
struct i2c_msg msg = {.addr=0x09, .flags=0, .buf=data, .len = sizeof(data)};
i2c_transfer(&dev->i2c_adap, &msg, 1);
- }
break;
+ }
case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
+ {
/* initialize analog mode */
- {
u8 data[] = { 0x3c, 0x33, 0x6a};
struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
i2c_transfer(&dev->i2c_adap, &msg, 1);
- }
break;
+ }
case SAA7134_BOARD_CINERGY_HT_PCMCIA:
case SAA7134_BOARD_CINERGY_HT_PCI:
+ {
/* initialize analog mode */
- {
u8 data[] = { 0x3c, 0x33, 0x68};
struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
i2c_transfer(&dev->i2c_adap, &msg, 1);
- }
break;
+ }
case SAA7134_BOARD_KWORLD_ATSC110:
- {
- /* enable tuner */
- int i;
- static const u8 buffer [] = { 0x10,0x12,0x13,0x04,0x16,0x00,0x14,0x04,0x017,0x00 };
- dev->i2c_client.addr = 0x0a;
- for (i = 0; i < 5; i++)
- if (2 != i2c_master_send(&dev->i2c_client,&buffer[i*2],2))
- printk(KERN_WARNING "%s: Unable to enable tuner(%i).\n",
- dev->name, i);
- }
+ {
+ /* enable tuner */
+ int i;
+ static const u8 buffer [] = { 0x10, 0x12, 0x13, 0x04, 0x16,
+ 0x00, 0x14, 0x04, 0x17, 0x00 };
+ dev->i2c_client.addr = 0x0a;
+ for (i = 0; i < 5; i++)
+ if (2 != i2c_master_send(&dev->i2c_client,
+ &buffer[i*2], 2))
+ printk(KERN_WARNING
+ "%s: Unable to enable tuner(%i).\n",
+ dev->name, i);
break;
+ }
case SAA7134_BOARD_VIDEOMATE_DVBT_200:
case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
/* The T200 and the T200A share the same pci id. Consequently,
}
break;
case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM:
- {
+ {
struct v4l2_priv_tun_config tea5767_cfg;
struct tea5767_ctrl ctl;
tea5767_cfg.tuner = TUNER_TEA5767;
tea5767_cfg.priv = &ctl;
saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, &tea5767_cfg);
- }
break;
}
+ } /* switch() */
- if (dev->tuner_type == TUNER_XC2028) {
- struct v4l2_priv_tun_config xc2028_cfg;
- struct xc2028_ctrl ctl;
-
- memset(&xc2028_cfg, 0, sizeof(ctl));
- memset(&ctl, 0, sizeof(ctl));
-
- ctl.fname = XC2028_DEFAULT_FIRMWARE;
- ctl.max_len = 64;
-
- switch (dev->board) {
- case SAA7134_BOARD_AVERMEDIA_A16D:
- ctl.demod = XC3028_FE_ZARLINK456;
- break;
- default:
- ctl.demod = XC3028_FE_OREN538;
- ctl.mts = 1;
- }
-
- xc2028_cfg.tuner = TUNER_XC2028;
- xc2028_cfg.priv = &ctl;
-
- saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg);
- }
+ saa7134_tuner_setup(dev);
return 0;
}
projects / linux-2.6-omap-h63xx.git / commitdiff