* cancelled. */
usb_kill_urb(usbduxsub_tmp->urbIn[i]);
}
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi: usbdux: unlinked InURB %d, err=%d\n",
+ dev_dbg(&usbduxsub_tmp->interface->dev,
+ "comedi: usbdux: unlinked InURB %d, err=%d\n",
i, err);
-#endif
}
}
return err;
int ret = 0;
if (!this_usbduxsub) {
- printk("comedi?: usbdux_ai_stop: this_usbduxsub=NULL!\n");
+ dev_err(&this_usbduxsub->interface->dev,
+ "comedi?: usbdux_ai_stop: this_usbduxsub=NULL!\n");
return -EFAULT;
}
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi: usbdux_ai_stop\n");
-#endif
+ dev_dbg(&this_usbduxsub->interface->dev, "comedi: usbdux_ai_stop\n");
if (do_unlink) {
/* stop aquistion */
int res = 0;
/* force unlink of all urbs */
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi: usbdux_ai_cancel\n");
-#endif
this_usbduxsub = dev->private;
- if (!this_usbduxsub) {
- printk("comedi: usbdux_ai_cancel: this_usbduxsub=NULL\n");
+ if (!this_usbduxsub)
return -EFAULT;
- }
+
+ dev_dbg(&this_usbduxsub->interface->dev, "comedi: usbdux_ai_cancel\n");
+
/* prevent other CPUs from submitting new commands just now */
down(&this_usbduxsub->sem);
if (!(this_usbduxsub->probed)) {
comedi_device *this_comedidev;
comedi_subdevice *s;
- /* sanity checks */
- /* is the urb there? */
- if (!urb) {
- printk("comedi_: usbdux_: ao int-handler called with urb=NULL!\n");
- return;
- }
/* the context variable points to the subdevice */
this_comedidev = urb->context;
- if (unlikely(!this_comedidev)) {
- printk("comedi_: usbdux_: BUG! urb context is a NULL pointer!\n");
- return;
- }
/* the private structure of the subdevice is usbduxsub_t */
this_usbduxsub = this_comedidev->private;
- if (unlikely(!this_usbduxsub)) {
- printk("comedi_: usbdux_: BUG! private of comedi subdev is a NULL pointer!\n");
- return;
- }
/* subdevice which is the AD converter */
s = this_comedidev->subdevices + SUBDEV_AD;
/* error in the ISOchronous data */
/* we don't copy the data into the transfer buffer */
/* and recycle the last data byte */
-#ifdef CONFIG_COMEDI_DEBUG
- printk("comedi%d: usbdux: CRC error in ISO IN stream.\n",
+ dev_dbg(&urb->dev->dev,
+ "comedi%d: usbdux: CRC error in ISO IN stream.\n",
this_usbduxsub->comedidev->minor);
-#endif
break;
/* a real error on the bus */
/* pass error to comedi if we are really running a command */
if (this_usbduxsub->ai_cmd_running) {
- printk("Non-zero urb status received in ai intr context: %d\n", urb->status);
+ dev_err(&urb->dev->dev,
+ "Non-zero urb status received in ai intr "
+ "context: %d\n", urb->status);
s->async->events |= COMEDI_CB_EOA;
s->async->events |= COMEDI_CB_ERROR;
comedi_event(this_usbduxsub->comedidev, s);
/* resubmit the urb */
err = USB_SUBMIT_URB(urb);
if (unlikely(err < 0)) {
- printk("comedi_: usbdux_: urb resubmit failed in int-context! err=%d ", err);
+ dev_err(&urb->dev->dev,
+ "comedi_: urb resubmit failed in int-context! err=%d\n",
+ err);
if (err == -EL2NSYNC)
- printk("--> buggy USB host controller or bug in IRQ handler!\n");
- else
- printk("\n");
+ dev_err(&urb->dev->dev,
+ "buggy USB host controller or bug in IRQ "
+ "handler!\n");
s->async->events |= COMEDI_CB_EOA;
s->async->events |= COMEDI_CB_ERROR;
comedi_event(this_usbduxsub->comedidev, s);
if (usbduxsub_tmp->urbOut[i])
usb_kill_urb(usbduxsub_tmp->urbOut[i]);
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi: usbdux: unlinked OutURB %d: res=%d\n",
+ dev_dbg(&usbduxsub_tmp->interface->dev,
+ "comedi: usbdux: unlinked OutURB %d: res=%d\n",
i, err);
-#endif
}
}
return err;
{
int ret = 0;
- if (!this_usbduxsub) {
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi?: usbdux_ao_stop: this_usbduxsub=NULL!\n");
-#endif
+ if (!this_usbduxsub)
return -EFAULT;
- }
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi: usbdux_ao_cancel\n");
-#endif
+ dev_dbg(&this_usbduxsub->interface->dev, "comedi: usbdux_ao_cancel\n");
+
if (do_unlink)
ret = usbduxsub_unlink_OutURBs(this_usbduxsub);
usbduxsub_t *this_usbduxsub = dev->private;
int res = 0;
- if (!this_usbduxsub) {
- printk("comedi: usbdux_ao_cancel: this_usbduxsub=NULL\n");
+ if (!this_usbduxsub)
return -EFAULT;
- }
+
/* prevent other CPUs from submitting a command just now */
down(&this_usbduxsub->sem);
if (!(this_usbduxsub->probed)) {
comedi_device *this_comedidev;
comedi_subdevice *s;
- if (!urb) {
- printk("comedi_: usbdux_: ao urb handler called with NULL ptr.\n");
- return;
- }
/* the context variable points to the subdevice */
this_comedidev = urb->context;
- if (!this_comedidev) {
- printk("comedi_: usbdux_: ao urb int-context is a NULL pointer.\n");
- return;
- }
/* the private structure of the subdevice is usbduxsub_t */
this_usbduxsub = this_comedidev->private;
- if (!this_usbduxsub) {
- printk("comedi_: usbdux_: private data structure of ao subdev is NULL p.\n");
- return;
- }
s = this_comedidev->subdevices + SUBDEV_DA;
default:
/* a real error */
if (this_usbduxsub->ao_cmd_running) {
- printk("comedi_: usbdux_: Non-zero urb status received in ao intr context: %d\n", urb->status);
+ dev_err(&urb->dev->dev,
+ "comedi_: Non-zero urb status received in ao "
+ "intr context: %d\n", urb->status);
s->async->events |= COMEDI_CB_ERROR;
s->async->events |= COMEDI_CB_EOA;
comedi_event(this_usbduxsub->comedidev, s);
/* printk("data[0]=%x, data[1]=%x, data[2]=%x\n", */
/* datap[0],datap[1],datap[2]); */
if (ret < 0) {
- printk("comedi: usbdux: buffer underflow\n");
+ dev_err(&urb->dev->dev,
+ "comedi: buffer underflow\n");
s->async->events |= COMEDI_CB_EOA;
s->async->events |= COMEDI_CB_OVERFLOW;
}
urb->iso_frame_desc[0].length = SIZEOUTBUF;
urb->iso_frame_desc[0].status = 0;
if ((ret = USB_SUBMIT_URB(urb)) < 0) {
- printk("comedi_: usbdux_: ao urb resubm failed in int-cont.");
- printk("ret=%d", ret);
+ dev_err(&urb->dev->dev,
+ "comedi_: ao urb resubm failed in int-cont. "
+ "ret=%d", ret);
if (ret == EL2NSYNC)
- printk("--> buggy USB host controller or bug in IRQ handling!\n");
- else
- printk("\n");
+ dev_err(&urb->dev->dev,
+ "buggy USB host controller or bug in "
+ "IRQ handling!\n");
s->async->events |= COMEDI_CB_EOA;
s->async->events |= COMEDI_CB_ERROR;
/* Timeout */
EZTIMEOUT);
if (errcode < 0) {
- printk("comedi_: usbdux_: control msg failed (start)\n");
+ dev_err(&usbduxsub->interface->dev,
+ "comedi_: control msg failed (start)\n");
return errcode;
}
}
/* Timeout */
EZTIMEOUT);
if (errcode < 0) {
- printk("comedi_: usbdux: control msg failed (stop)\n");
+ dev_err(&usbduxsub->interface->dev,
+ "comedi_: control msg failed (stop)\n");
return errcode;
}
}
int errcode;
if (usbduxsub->probed) {
-#ifdef CONFIG_COMEDI_DEBUG
- printk("comedi%d: usbdux: uploading %d bytes",
- usbduxsub->comedidev->minor, len);
- printk(" to addr %d, first byte=%d.\n",
+ dev_dbg(&usbduxsub->interface->dev,
+ "comedi%d: usbdux: uploading %d bytes"
+ " to addr %d, first byte=%d.\n",
+ usbduxsub->comedidev->minor, len,
startAddr, local_transfer_buffer[0]);
-#endif
errcode = USB_CONTROL_MSG
(usbduxsub->usbdev,
usb_sndctrlpipe(usbduxsub->usbdev, 0),
len,
/* timeout */
EZTIMEOUT);
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi_: usbdux: result=%d\n", errcode);
-#endif
+ dev_dbg(&usbduxsub->interface->dev,
+ "comedi_: result=%d\n", errcode);
if (errcode < 0) {
- printk("comedi_: usbdux: uppload failed\n");
+ dev_err(&usbduxsub->interface->dev,
+ "comedi_: upload failed\n");
return errcode;
}
} else {
}
ret = usbduxsub_stop(usbduxsub);
if (ret < 0) {
- printk("comedi_: usbdux: can not stop firmware\n");
+ dev_err(&usbduxsub->interface->dev,
+ "comedi_: can not stop firmware\n");
return ret;
}
ret = usbduxsub_upload(usbduxsub, firmwareBinary, 0, sizeFirmware);
if (ret < 0) {
- printk("comedi_: usbdux: firmware upload failed\n");
+ dev_err(&usbduxsub->interface->dev,
+ "comedi_: firmware upload failed\n");
return ret;
}
ret = usbduxsub_start(usbduxsub);
if (ret < 0) {
- printk("comedi_: usbdux: can not start firmware\n");
+ dev_err(&usbduxsub->interface->dev,
+ "comedi_: can not start firmware\n");
return ret;
}
return 0;
usbduxsub->urbIn[i]->dev = usbduxsub->usbdev;
usbduxsub->urbIn[i]->status = 0;
usbduxsub->urbIn[i]->transfer_flags = URB_ISO_ASAP;
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi%d: usbdux: submitting in-urb[%d]: %p,%p intv=%d\n", usbduxsub->comedidev->minor, i, (usbduxsub->urbIn[i]->context), (usbduxsub->urbIn[i]->dev), (usbduxsub->urbIn[i]->interval));
-#endif
+ dev_dbg(&usbduxsub->interface->dev,
+ "comedi%d: submitting in-urb[%d]: %p,%p intv=%d\n",
+ usbduxsub->comedidev->minor, i,
+ (usbduxsub->urbIn[i]->context),
+ (usbduxsub->urbIn[i]->dev),
+ (usbduxsub->urbIn[i]->interval));
errFlag = USB_SUBMIT_URB(usbduxsub->urbIn[i]);
if (errFlag) {
- printk("comedi_: usbdux: ai: ");
- printk("USB_SUBMIT_URB(%d)", i);
- printk(" error %d\n", errFlag);
+ dev_err(&usbduxsub->interface->dev,
+ "comedi_: ai: USB_SUBMIT_URB(%d) error %d\n",
+ i, errFlag);
return errFlag;
}
}
return -EFAULT;
}
for (i = 0; i < usbduxsub->numOfOutBuffers; i++) {
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi_: usbdux: submitting out-urb[%d]\n", i);
-#endif
+ dev_dbg(&usbduxsub->interface->dev,
+ "comedi_: submitting out-urb[%d]\n", i);
/* in case of a resubmission after an unlink... */
usbduxsub->urbOut[i]->context = usbduxsub->comedidev;
usbduxsub->urbOut[i]->dev = usbduxsub->usbdev;
usbduxsub->urbOut[i]->transfer_flags = URB_ISO_ASAP;
errFlag = USB_SUBMIT_URB(usbduxsub->urbOut[i]);
if (errFlag) {
- printk("comedi_: usbdux: ao: ");
- printk("USB_SUBMIT_URB(%d)", i);
- printk(" error %d\n", errFlag);
+ dev_err(&usbduxsub->interface->dev,
+ "comedi_: ao: USB_SUBMIT_URB(%d) error %d\n",
+ i, errFlag);
return errFlag;
}
}
if (!(this_usbduxsub->probed)) {
return -ENODEV;
}
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi%d: usbdux_ai_cmdtest\n", dev->minor);
-#endif
+ dev_dbg(&this_usbduxsub->interface->dev,
+ "comedi%d: usbdux_ai_cmdtest\n", dev->minor);
+
/* make sure triggers are valid */
/* Only immediate triggers are allowed */
tmp = cmd->start_src;
this_usbduxsub->dux_commands[0] = cmd_type;
#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi%d: usbdux: dux_commands: ",
+ printk(KERN_DEBUG "comedi%d: usbdux: dux_commands: ",
this_usbduxsub->comedidev->minor);
for (result = 0; result < SIZEOFDUXBUFFER; result++) {
printk(" %02x", this_usbduxsub->dux_commands[result]);
COMMAND_OUT_EP),
this_usbduxsub->dux_commands, SIZEOFDUXBUFFER, &nsent, 10 * HZ);
if (result < 0)
- printk("comedi%d: could not transmit dux_command to the usb-device, err=%d\n", this_usbduxsub->comedidev->minor, result);
+ dev_err(&this_usbduxsub->interface->dev, "comedi%d: "
+ "could not transmit dux_command to the usb-device, "
+ "err=%d\n", this_usbduxsub->comedidev->minor, result);
return result;
}
COMMAND_IN_EP),
this_usbduxsub->insnBuffer, SIZEINSNBUF, &nrec, 1 * HZ);
if (result < 0) {
- printk("comedi%d: insn: USB error %d while receiving DUX command\n", this_usbduxsub->comedidev->minor, result);
+ dev_err(&this_usbduxsub->interface->dev, "comedi%d: "
+ "insn: USB error %d while receiving DUX command"
+ "\n", this_usbduxsub->comedidev->minor, result);
return result;
}
if (le16_to_cpu(this_usbduxsub->insnBuffer[0]) == command) {
}
}
/* this is only reached if the data has been requested a couple of times */
- printk("comedi%d: insn: wrong data returned from firmware: want cmd %d, got cmd %d.\n", this_usbduxsub->comedidev->minor, command, le16_to_cpu(this_usbduxsub->insnBuffer[0]));
+ dev_err(&this_usbduxsub->interface->dev, "comedi%d: insn: "
+ "wrong data returned from firmware: want cmd %d, got cmd %d.\n",
+ this_usbduxsub->comedidev->minor, command,
+ le16_to_cpu(this_usbduxsub->insnBuffer[0]));
return -EFAULT;
}
up(&this_usbduxsub->sem);
return -ENODEV;
}
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi%d: usbdux_ai_inttrig\n", dev->minor);
-#endif
+ dev_dbg(&this_usbduxsub->interface->dev,
+ "comedi%d: usbdux_ai_inttrig\n", dev->minor);
if (trignum != 0) {
- printk("comedi%d: usbdux_ai_inttrig: invalid trignum\n",
+ dev_err(&this_usbduxsub->interface->dev,
+ "comedi%d: usbdux_ai_inttrig: invalid trignum\n",
dev->minor);
up(&this_usbduxsub->sem);
return -EINVAL;
this_usbduxsub->ai_cmd_running = 1;
ret = usbduxsub_submit_InURBs(this_usbduxsub);
if (ret < 0) {
- printk("comedi%d: usbdux_ai_inttrig: urbSubmit: err=%d\n", dev->minor, ret);
+ dev_err(&this_usbduxsub->interface->dev,
+ "comedi%d: usbdux_ai_inttrig: "
+ "urbSubmit: err=%d\n", dev->minor, ret);
this_usbduxsub->ai_cmd_running = 0;
up(&this_usbduxsub->sem);
return ret;
}
s->async->inttrig = NULL;
} else {
- printk("comedi%d: ai_inttrig but acqu is already running\n",
+ dev_err(&this_usbduxsub->interface->dev,
+ "comedi%d: ai_inttrig but acqu is already running\n",
dev->minor);
}
up(&this_usbduxsub->sem);
usbduxsub_t *this_usbduxsub = dev->private;
int result;
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi%d: usbdux_ai_cmd\n", dev->minor);
-#endif
if (!this_usbduxsub)
return -EFAULT;
+ dev_dbg(&this_usbduxsub->interface->dev,
+ "comedi%d: usbdux_ai_cmd\n", dev->minor);
+
/* block other CPUs from starting an ai_cmd */
down(&this_usbduxsub->sem);
return -ENODEV;
}
if (this_usbduxsub->ai_cmd_running) {
- printk("comedi%d: ai_cmd not possible. Another ai_cmd is running.\n", dev->minor);
+ dev_err(&this_usbduxsub->interface->dev, "comedi%d: "
+ "ai_cmd not possible. Another ai_cmd is running.\n",
+ dev->minor);
up(&this_usbduxsub->sem);
return -EBUSY;
}
chan = CR_CHAN(cmd->chanlist[i]);
range = CR_RANGE(cmd->chanlist[i]);
if (i >= NUMCHANNELS) {
- printk("comedi%d: channel list too long\n", dev->minor);
+ dev_err(&this_usbduxsub->interface->dev,
+ "comedi%d: channel list too long\n",
+ dev->minor);
break;
}
this_usbduxsub->dux_commands[i + 2] =
create_adc_command(chan, range);
}
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi %d: sending commands to the usb device: ", dev->minor);
- printk("size=%u\n", NUMCHANNELS);
-#endif
+ dev_dbg(&this_usbduxsub->interface->dev,
+ "comedi %d: sending commands to the usb device: size=%u\n",
+ dev->minor, NUMCHANNELS);
+
if ((result = send_dux_commands(this_usbduxsub, SENDADCOMMANDS)) < 0) {
up(&this_usbduxsub->sem);
return result;
this_usbduxsub->ai_timer = cmd->scan_begin_arg / 1000000;
}
if (this_usbduxsub->ai_timer < 1) {
- printk("comedi%d: usbdux: ai_cmd: timer=%d, scan_begin_arg=%d. Not properly tested by cmdtest?\n", dev->minor, this_usbduxsub->ai_timer, cmd->scan_begin_arg);
+ dev_err(&this_usbduxsub->interface->dev, "comedi%d: ai_cmd: "
+ "timer=%d, scan_begin_arg=%d. "
+ "Not properly tested by cmdtest?\n", dev->minor,
+ this_usbduxsub->ai_timer, cmd->scan_begin_arg);
up(&this_usbduxsub->sem);
return -EINVAL;
}
int err;
usbduxsub_t *this_usbduxsub = dev->private;
- if (!this_usbduxsub) {
- printk("comedi%d: ai_insn_read: no usb dev.\n", dev->minor);
+ if (!this_usbduxsub)
return 0;
- }
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi%d: ai_insn_read, insn->n=%d, insn->subdev=%d\n",
+
+ dev_dbg(&this_usbduxsub->interface->dev,
+ "comedi%d: ai_insn_read, insn->n=%d, insn->subdev=%d\n",
dev->minor, insn->n, insn->subdev);
-#endif
+
down(&this_usbduxsub->sem);
if (!(this_usbduxsub->probed)) {
up(&this_usbduxsub->sem);
return -ENODEV;
}
if (this_usbduxsub->ai_cmd_running) {
- printk("comedi%d: ai_insn_read not possible. Async Command is running.\n", dev->minor);
+ dev_err(&this_usbduxsub->interface->dev,
+ "comedi%d: ai_insn_read not possible. "
+ "Async Command is running.\n", dev->minor);
up(&this_usbduxsub->sem);
return 0;
}
int chan = CR_CHAN(insn->chanspec);
usbduxsub_t *this_usbduxsub = dev->private;
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi%d: ao_insn_write\n", dev->minor);
-#endif
if (!this_usbduxsub)
return -EFAULT;
+ dev_dbg(&this_usbduxsub->interface->dev,
+ "comedi%d: ao_insn_write\n", dev->minor);
+
down(&this_usbduxsub->sem);
if (!(this_usbduxsub->probed)) {
up(&this_usbduxsub->sem);
return -ENODEV;
}
if (this_usbduxsub->ao_cmd_running) {
- printk("comedi%d: ao_insn_write: ERROR: asynchronous ao_cmd is running\n", dev->minor);
+ dev_err(&this_usbduxsub->interface->dev,
+ "comedi%d: ao_insn_write: "
+ "ERROR: asynchronous ao_cmd is running\n", dev->minor);
up(&this_usbduxsub->sem);
return 0;
}
for (i = 0; i < insn->n; i++) {
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi%d: ao_insn_write: data[chan=%d,i=%d]=%d\n",
+ dev_dbg(&this_usbduxsub->interface->dev,
+ "comedi%d: ao_insn_write: data[chan=%d,i=%d]=%d\n",
dev->minor, chan, i, data[i]);
-#endif
+
/* number of channels: 1 */
this_usbduxsub->dux_commands[1] = 1;
/* one 16 bit value */
return -ENODEV;
}
if (trignum != 0) {
- printk("comedi%d: usbdux_ao_inttrig: invalid trignum\n",
+ dev_err(&this_usbduxsub->interface->dev,
+ "comedi%d: usbdux_ao_inttrig: invalid trignum\n",
dev->minor);
return -EINVAL;
}
this_usbduxsub->ao_cmd_running = 1;
ret = usbduxsub_submit_OutURBs(this_usbduxsub);
if (ret < 0) {
- printk("comedi%d: usbdux_ao_inttrig: submitURB: err=%d\n", dev->minor, ret);
+ dev_err(&this_usbduxsub->interface->dev,
+ "comedi%d: usbdux_ao_inttrig: submitURB: "
+ "err=%d\n", dev->minor, ret);
this_usbduxsub->ao_cmd_running = 0;
up(&this_usbduxsub->sem);
return ret;
}
s->async->inttrig = NULL;
} else {
- printk("comedi%d: ao_inttrig but acqu is already running.\n",
+ dev_err(&this_usbduxsub->interface->dev,
+ "comedi%d: ao_inttrig but acqu is already running.\n",
dev->minor);
}
up(&this_usbduxsub->sem);
if (!(this_usbduxsub->probed))
return -ENODEV;
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi%d: usbdux_ao_cmdtest\n", dev->minor);
-#endif
+ dev_dbg(&this_usbduxsub->interface->dev,
+ "comedi%d: usbdux_ao_cmdtest\n", dev->minor);
+
/* make sure triggers are valid */
/* Only immediate triggers are allowed */
tmp = cmd->start_src;
}
}
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi%d: err=%d, scan_begin_src=%d, scan_begin_arg=%d, convert_src=%d, convert_arg=%d\n", dev->minor, err, cmd->scan_begin_src, cmd->scan_begin_arg, cmd->convert_src, cmd->convert_arg);
-#endif
+ dev_dbg(&this_usbduxsub->interface->dev, "comedi%d: err=%d, "
+ "scan_begin_src=%d, scan_begin_arg=%d, convert_src=%d, "
+ "convert_arg=%d\n", dev->minor, err, cmd->scan_begin_src,
+ cmd->scan_begin_arg, cmd->convert_src, cmd->convert_arg);
if (err)
return 3;
up(&this_usbduxsub->sem);
return -ENODEV;
}
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi%d: usbdux_ao_cmd\n", dev->minor);
-#endif
+ dev_dbg(&this_usbduxsub->interface->dev,
+ "comedi%d: %s\n", dev->minor, __func__);
/* set current channel of the running aquisition to zero */
s->async->cur_chan = 0;
chan = CR_CHAN(cmd->chanlist[i]);
gain = CR_RANGE(cmd->chanlist[i]);
if (i >= NUMOUTCHANNELS) {
- printk("comedi%d: usbdux_ao_cmd: channel list too long\n", dev->minor);
+ dev_err(&this_usbduxsub->interface->dev,
+ "comedi%d: %s: channel list too long\n",
+ dev->minor, __func__);
break;
}
this_usbduxsub->dac_commands[i] = (chan << 6);
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi%d: dac command for ch %d is %x\n",
+ dev_dbg(&this_usbduxsub->interface->dev,
+ "comedi%d: dac command for ch %d is %x\n",
dev->minor, i, this_usbduxsub->dac_commands[i]);
-#endif
}
/* we count in steps of 1ms (125us) */
/* 1ms */
/* timing of the scan: we get all channels at once */
this_usbduxsub->ao_timer = cmd->scan_begin_arg / 1000000;
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi%d: usbdux: scan_begin_src=%d, scan_begin_arg=%d, convert_src=%d, convert_arg=%d\n", dev->minor, cmd->scan_begin_src, cmd->scan_begin_arg, cmd->convert_src, cmd->convert_arg);
- printk("comedi%d: usbdux: ao_timer=%d (ms)\n",
+ dev_dbg(&this_usbduxsub->interface->dev,
+ "comedi%d: scan_begin_src=%d, scan_begin_arg=%d, "
+ "convert_src=%d, convert_arg=%d\n", dev->minor,
+ cmd->scan_begin_src, cmd->scan_begin_arg,
+ cmd->convert_src, cmd->convert_arg);
+ dev_dbg(&this_usbduxsub->interface->dev,
+ "comedi%d: ao_timer=%d (ms)\n",
dev->minor, this_usbduxsub->ao_timer);
-#endif
if (this_usbduxsub->ao_timer < 1) {
- printk("comedi%d: usbdux: ao_timer=%d, scan_begin_arg=%d. Not properly tested by cmdtest?\n", dev->minor, this_usbduxsub->ao_timer, cmd->scan_begin_arg);
+ dev_err(&this_usbduxsub->interface->dev,
+ "comedi%d: usbdux: ao_timer=%d, "
+ "scan_begin_arg=%d. "
+ "Not properly tested by cmdtest?\n",
+ dev->minor, this_usbduxsub->ao_timer,
+ cmd->scan_begin_arg);
up(&this_usbduxsub->sem);
return -EINVAL;
}
if (usbduxsub_tmp && usbduxsub_tmp->urbPwm) {
if (usbduxsub_tmp->urbPwm)
usb_kill_urb(usbduxsub_tmp->urbPwm);
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi: usbdux: unlinked PwmURB: res=%d\n", err);
-#endif
+ dev_dbg(&usbduxsub_tmp->interface->dev,
+ "comedi: unlinked PwmURB: res=%d\n", err);
}
return err;
}
{
int ret = 0;
- if (!this_usbduxsub) {
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi?: usbdux_pwm_stop: this_usbduxsub=NULL!\n");
-#endif
+ if (!this_usbduxsub)
return -EFAULT;
- }
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi: usbdux_pwm_cancel\n");
-#endif
+
+ dev_dbg(&this_usbduxsub->interface->dev, "comedi: %s\n", __func__);
if (do_unlink)
ret = usbduxsub_unlink_PwmURBs(this_usbduxsub);
/* unlink only if it is really running */
res = usbdux_pwm_stop(this_usbduxsub, this_usbduxsub->pwm_cmd_running);
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi %d: sending pwm off command to the usb device.\n",
+ dev_dbg(&this_usbduxsub->interface->dev,
+ "comedi %d: sending pwm off command to the usb device.\n",
dev->minor);
-#endif
if ((res = send_dux_commands(this_usbduxsub, SENDPWMOFF)) < 0)
return res;
comedi_device *this_comedidev;
comedi_subdevice *s;
- /* printk("PWM: IRQ\n"); */
+ /* printk(KERN_DEBUG "PWM: IRQ\n"); */
- if (!urb) {
- printk("comedi_: usbdux_: pwm urb handler called with NULL ptr.\n");
- return;
- }
/* the context variable points to the subdevice */
this_comedidev = urb->context;
- if (!this_comedidev) {
- printk("comedi_: usbdux_: pwm urb int-context is a NULL pointer.\n");
- return;
- }
/* the private structure of the subdevice is usbduxsub_t */
this_usbduxsub = this_comedidev->private;
- if (!this_usbduxsub) {
- printk("comedi_: usbdux_: private data structure of pwm subdev is NULL p.\n");
- return;
- }
s = this_comedidev->subdevices + SUBDEV_DA;
default:
/* a real error */
if (this_usbduxsub->pwm_cmd_running) {
- printk("comedi_: usbdux_: Non-zero urb status received in pwm intr context: %d\n", urb->status);
+ dev_err(&this_usbduxsub->interface->dev,
+ "comedi_: Non-zero urb status received in "
+ "pwm intr context: %d\n", urb->status);
usbdux_pwm_stop(this_usbduxsub, 0);
}
return;
urb->status = 0;
if (this_usbduxsub->pwm_cmd_running) {
if ((ret = USB_SUBMIT_URB(urb)) < 0) {
- printk("comedi_: usbdux_: pwm urb resubm failed in int-cont.");
- printk("ret=%d", ret);
+ dev_err(&this_usbduxsub->interface->dev,
+ "comedi_: pwm urb resubm failed in int-cont. "
+ "ret=%d", ret);
if (ret == EL2NSYNC)
- printk("--> buggy USB host controller or bug in IRQ handling!\n");
- else
- printk("\n");
+ dev_err(&this_usbduxsub->interface->dev,
+ "buggy USB host controller or bug in "
+ "IRQ handling!\n");
/* don't do an unlink here */
usbdux_pwm_stop(this_usbduxsub, 0);
if (!usbduxsub)
return -EFAULT;
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi_: usbdux: submitting pwm-urb\n");
-#endif
- /* in case of a resubmission after an unlink... */
+ dev_dbg(&usbduxsub->interface->dev, "comedi_: submitting pwm-urb\n");
+ /* in case of a resubmission after an unlink... */
usb_fill_bulk_urb(usbduxsub->urbPwm,
usbduxsub->usbdev,
usb_sndbulkpipe(usbduxsub->usbdev, PWM_EP),
errFlag = USB_SUBMIT_URB(usbduxsub->urbPwm);
if (errFlag) {
- printk("comedi_: usbdux: pwm: ");
- printk("USB_SUBMIT_URB");
- printk(" error %d\n", errFlag);
+ dev_err(&usbduxsub->interface->dev,
+ "comedi_: usbdux: pwm: USB_SUBMIT_URB error %d\n",
+ errFlag);
return errFlag;
}
return 0;
int fx2delay = 255;
if (period < MIN_PWM_PERIOD) {
- printk("comedi%d: illegal period setting for pwm.\n", dev->minor);
+ dev_err(&this_usbduxsub->interface->dev,
+ "comedi%d: illegal period setting for pwm.\n",
+ dev->minor);
return -EAGAIN;
} else {
fx2delay = period / ((int)(6*512*(1.0/0.033))) - 6;
if (fx2delay > 255) {
- printk("comedi%d: period %d for pwm is too low.\n",
+ dev_err(&this_usbduxsub->interface->dev,
+ "comedi%d: period %d for pwm is too low.\n",
dev->minor, period);
return -EAGAIN;
}
}
this_usbduxsub->pwmDelay = fx2delay;
this_usbduxsub->pwmPeriod = period;
-#ifdef NOISY_DUX_DEBUGBUG
- printk("usbdux_pwm_period: frequ=%d, period=%d\n", period, fx2delay);
-#endif
+ dev_dbg(&this_usbduxsub->interface->dev, "%s: frequ=%d, period=%d\n",
+ __func__, period, fx2delay);
return 0;
}
int ret, i;
usbduxsub_t *this_usbduxsub = dev->private;
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi%d: usbdux_pwm_start\n", dev->minor);
-#endif
+ dev_dbg(&this_usbduxsub->interface->dev, "comedi%d: %s\n",
+ dev->minor, __func__);
+
if (this_usbduxsub->pwm_cmd_running) {
/* already running */
return 0;
usbduxsub_t *this_usbduxsub = dev->private;
switch (data[0]) {
case INSN_CONFIG_ARM:
-#ifdef NOISY_DUX_DEBUGBUG
/* switch it on */
- printk("comedi%d: pwm_insn_config: pwm on\n",
- dev->minor);
-#endif
+ dev_dbg(&this_usbduxsub->interface->dev,
+ "comedi%d: %s: pwm on\n", dev->minor, __func__);
/*
* if not zero the PWM is limited to a certain time which is
* not supported here
return -EINVAL;
return usbdux_pwm_start(dev, s);
case INSN_CONFIG_DISARM:
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi%d: pwm_insn_config: pwm off\n",
- dev->minor);
-#endif
+ dev_dbg(&this_usbduxsub->interface->dev,
+ "comedi%d: %s: pwm off\n", dev->minor, __func__);
return usbdux_pwm_cancel(dev, s);
case INSN_CONFIG_GET_PWM_STATUS:
/*
data[1] = this_usbduxsub->pwm_cmd_running;
return 0;
case INSN_CONFIG_PWM_SET_PERIOD:
-#ifdef NOISY_DUX_DEBUGBUG
- printk("comedi%d: pwm_insn_config: setting period\n",
- dev->minor);
-#endif
+ dev_dbg(&this_usbduxsub->interface->dev,
+ "comedi%d: %s: setting period\n", dev->minor, __func__);
return usbdux_pwm_period(dev, s, data[1]);
case INSN_CONFIG_PWM_GET_PERIOD:
data[1] = this_usbduxsub->pwmPeriod;
{
int i;
-#ifdef CONFIG_COMEDI_DEBUG
- printk("comedi_: usbdux: tiding up\n");
-#endif
if (!usbduxsub_tmp)
return;
+ dev_dbg(&usbduxsub_tmp->interface->dev, "comedi_: tiding up\n");
/* shows the usb subsystem that the driver is down */
if (usbduxsub_tmp->interface)
/* taken from David Brownell's fxload and adjusted for this driver */
static int read_firmware(usbduxsub_t *usbduxsub, void *firmwarePtr, long size)
{
+ struct device *dev = &usbduxsub->interface->dev;
int i = 0;
unsigned char *fp = (char *)firmwarePtr;
unsigned char *firmwareBinary = NULL;
firmwareBinary = kzalloc(FIRMWARE_MAX_LEN, GFP_KERNEL);
if (!firmwareBinary) {
- printk("comedi_: usbdux: mem alloc for firmware failed\n");
+ dev_err(dev, "comedi_: mem alloc for firmware failed\n");
return -ENOMEM;
}
i++;
j++;
if (j >= sizeof(buf)) {
- printk("comedi_: usbdux: bogus firmware file!\n");
+ dev_err(dev, "comedi_: bogus firmware file!\n");
return -1;
}
}
}
buf[j] = 0;
- /*printk("comedi_: buf=%s\n",buf); */
+ /* dev_dbg(dev, "comedi_: buf=%s\n", buf); */
/* EXTENSION: "# comment-till-end-of-line", for copyrights etc */
if (buf[0] == '#')
continue;
if (buf[0] != ':') {
- printk("comedi_: usbdux: upload: not an ihex record: %s", buf);
+ dev_err(dev, "comedi_: upload: not an ihex record: %s",
+ buf);
return -EFAULT;
}
if (maxAddr >= FIRMWARE_MAX_LEN) {
- printk("comedi_: usbdux: firmware upload goes beyond FX2 RAM boundaries.");
+ dev_err(dev, "comedi_: firmware upload goes "
+ "beyond FX2 RAM boundaries.\n");
return -EFAULT;
}
- /*printk("comedi_: usbdux: off=%x, len=%x:",off,len); */
+ /* dev_dbg(dev, "comedi_: off=%x, len=%x:\n", off, len); */
/* Read the record type */
type = hex2unsigned(buf + 7);
if (type != 0) {
- printk("comedi_: usbdux: unsupported record type: %u\n",
+ dev_err(dev, "comedi_: unsupported record type: %u\n",
type);
return -EFAULT;
}
/*printk("\n"); */
if (i >= size) {
- printk("comedi_: usbdux: unexpected end of hex file\n");
+ dev_err(dev, "comedi_: unexpected end of hex file\n");
break;
}
/* allocate memory for the urbs and initialise them */
static int usbduxsub_probe(struct usb_interface *uinterf,
- const struct usb_device_id *id)
+ const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(uinterf);
+ struct device *dev = &uinterf->dev;
int i;
int index;
-#ifdef CONFIG_COMEDI_DEBUG
- printk("comedi_: usbdux_: finding a free structure for the usb-device\n");
-#endif
+ dev_dbg(dev, "comedi_: usbdux_: "
+ "finding a free structure for the usb-device\n");
+
down(&start_stop_sem);
/* look for a free place in the usbdux array */
index = -1;
/* no more space */
if (index == -1) {
- printk("Too many usbdux-devices connected.\n");
+ dev_err(dev, "Too many usbdux-devices connected.\n");
up(&start_stop_sem);
return PROBE_ERR_RETURN(-EMFILE);
}
-#ifdef CONFIG_COMEDI_DEBUG
- printk("comedi_: usbdux: usbduxsub[%d] is ready to connect to comedi.\n", index);
-#endif
+ dev_dbg(dev, "comedi_: usbdux: "
+ "usbduxsub[%d] is ready to connect to comedi.\n", index);
init_MUTEX(&(usbduxsub[index].sem));
/* save a pointer to the usb device */
/* will be needed for disconnect */
usb_set_intfdata(uinterf, &(usbduxsub[index]));
-#ifdef CONFIG_COMEDI_DEBUG
- printk("comedi_: usbdux: ifnum=%d\n", usbduxsub[index].ifnum);
-#endif
+ dev_dbg(dev, "comedi_: usbdux: ifnum=%d\n", usbduxsub[index].ifnum);
+
/* test if it is high speed (USB 2.0) */
usbduxsub[index].high_speed =
(usbduxsub[index].usbdev->speed == USB_SPEED_HIGH);
/* create space for the commands of the DA converter */
usbduxsub[index].dac_commands = kzalloc(NUMOUTCHANNELS, GFP_KERNEL);
if (!usbduxsub[index].dac_commands) {
- printk("comedi_: usbdux: error alloc space for dac commands\n");
+ dev_err(dev, "comedi_: usbdux: "
+ "error alloc space for dac commands\n");
tidy_up(&(usbduxsub[index]));
up(&start_stop_sem);
return PROBE_ERR_RETURN(-ENOMEM);
/* create space for the commands going to the usb device */
usbduxsub[index].dux_commands = kzalloc(SIZEOFDUXBUFFER, GFP_KERNEL);
if (!usbduxsub[index].dux_commands) {
- printk("comedi_: usbdux: error alloc space for dac commands\n");
+ dev_err(dev, "comedi_: usbdux: "
+ "error alloc space for dac commands\n");
tidy_up(&(usbduxsub[index]));
up(&start_stop_sem);
return PROBE_ERR_RETURN(-ENOMEM);
/* create space for the in buffer and set it to zero */
usbduxsub[index].inBuffer = kzalloc(SIZEINBUF, GFP_KERNEL);
if (!(usbduxsub[index].inBuffer)) {
- printk("comedi_: usbdux: could not alloc space for inBuffer\n");
+ dev_err(dev, "comedi_: usbdux: "
+ "could not alloc space for inBuffer\n");
tidy_up(&(usbduxsub[index]));
up(&start_stop_sem);
return PROBE_ERR_RETURN(-ENOMEM);
/* create space of the instruction buffer */
usbduxsub[index].insnBuffer = kzalloc(SIZEINSNBUF, GFP_KERNEL);
if (!(usbduxsub[index].insnBuffer)) {
- printk("comedi_: usbdux: could not alloc space for insnBuffer\n");
+ dev_err(dev, "comedi_: usbdux: "
+ "could not alloc space for insnBuffer\n");
tidy_up(&(usbduxsub[index]));
up(&start_stop_sem);
return PROBE_ERR_RETURN(-ENOMEM);
/* create space for the outbuffer */
usbduxsub[index].outBuffer = kzalloc(SIZEOUTBUF, GFP_KERNEL);
if (!(usbduxsub[index].outBuffer)) {
- printk("comedi_: usbdux: could not alloc space for outBuffer\n");
+ dev_err(dev, "comedi_: usbdux: "
+ "could not alloc space for outBuffer\n");
tidy_up(&(usbduxsub[index]));
up(&start_stop_sem);
return PROBE_ERR_RETURN(-ENOMEM);
i = usb_set_interface(usbduxsub[index].usbdev,
usbduxsub[index].ifnum, 3);
if (i < 0) {
- printk("comedi_: usbdux%d: could not set alternate setting 3 in high speed.\n", index);
+ dev_err(dev, "comedi_: usbdux%d: "
+ "could not set alternate setting 3 in high speed.\n",
+ index);
tidy_up(&(usbduxsub[index]));
up(&start_stop_sem);
return PROBE_ERR_RETURN(-ENODEV);
kzalloc(sizeof(struct urb *) * usbduxsub[index].numOfInBuffers,
GFP_KERNEL);
if (!(usbduxsub[index].urbIn)) {
- printk("comedi_: usbdux: Could not alloc. urbIn array\n");
+ dev_err(dev, "comedi_: usbdux: Could not alloc. urbIn array\n");
tidy_up(&(usbduxsub[index]));
up(&start_stop_sem);
return PROBE_ERR_RETURN(-ENOMEM);
/* one frame: 1ms */
usbduxsub[index].urbIn[i] = USB_ALLOC_URB(1);
if (usbduxsub[index].urbIn[i] == NULL) {
- printk("comedi_: usbdux%d: Could not alloc. urb(%d)\n",
- index, i);
+ dev_err(dev, "comedi_: usbdux%d: "
+ "Could not alloc. urb(%d)\n", index, i);
tidy_up(&(usbduxsub[index]));
up(&start_stop_sem);
return PROBE_ERR_RETURN(-ENOMEM);
usbduxsub[index].urbIn[i]->transfer_buffer =
kzalloc(SIZEINBUF, GFP_KERNEL);
if (!(usbduxsub[index].urbIn[i]->transfer_buffer)) {
- printk("comedi_: usbdux%d: could not alloc. transb.\n",
- index);
+ dev_err(dev, "comedi_: usbdux%d: "
+ "could not alloc. transb.\n", index);
tidy_up(&(usbduxsub[index]));
up(&start_stop_sem);
return PROBE_ERR_RETURN(-ENOMEM);
kzalloc(sizeof(struct urb *) * usbduxsub[index].numOfOutBuffers,
GFP_KERNEL);
if (!(usbduxsub[index].urbOut)) {
- printk("comedi_: usbdux: Could not alloc. urbOut array\n");
+ dev_err(dev, "comedi_: usbdux: "
+ "Could not alloc. urbOut array\n");
tidy_up(&(usbduxsub[index]));
up(&start_stop_sem);
return PROBE_ERR_RETURN(-ENOMEM);
/* one frame: 1ms */
usbduxsub[index].urbOut[i] = USB_ALLOC_URB(1);
if (usbduxsub[index].urbOut[i] == NULL) {
- printk("comedi_: usbdux%d: Could not alloc. urb(%d)\n",
- index, i);
+ dev_err(dev, "comedi_: usbdux%d: "
+ "Could not alloc. urb(%d)\n", index, i);
tidy_up(&(usbduxsub[index]));
up(&start_stop_sem);
return PROBE_ERR_RETURN(-ENOMEM);
usbduxsub[index].urbOut[i]->transfer_buffer =
kzalloc(SIZEOUTBUF, GFP_KERNEL);
if (!(usbduxsub[index].urbOut[i]->transfer_buffer)) {
- printk("comedi_: usbdux%d: could not alloc. transb.\n",
- index);
+ dev_err(dev, "comedi_: usbdux%d: "
+ "could not alloc. transb.\n", index);
tidy_up(&(usbduxsub[index]));
up(&start_stop_sem);
return PROBE_ERR_RETURN(-ENOMEM);
usbduxsub[index].sizePwmBuf = 512; /* max bulk ep size in high speed */
usbduxsub[index].urbPwm = USB_ALLOC_URB(0);
if (usbduxsub[index].urbPwm == NULL) {
- printk("comedi_: usbdux%d: Could not alloc. pwm urb\n",
- index);
+ dev_err(dev, "comedi_: usbdux%d: "
+ "Could not alloc. pwm urb\n", index);
tidy_up(&(usbduxsub[index]));
up(&start_stop_sem);
return PROBE_ERR_RETURN(-ENOMEM);
usbduxsub[index].urbPwm->transfer_buffer =
kzalloc(usbduxsub[index].sizePwmBuf, GFP_KERNEL);
if (!(usbduxsub[index].urbPwm->transfer_buffer)) {
- printk("comedi_: usbdux%d: could not alloc. transb. for pwm\n", index);
+ dev_err(dev, "comedi_: usbdux%d: "
+ "could not alloc. transb. for pwm\n", index);
tidy_up(&(usbduxsub[index]));
up(&start_stop_sem);
return PROBE_ERR_RETURN(-ENOMEM);
/* we've reached the bottom of the function */
usbduxsub[index].probed = 1;
up(&start_stop_sem);
- printk("comedi_: usbdux%d has been successfully initialised.\n", index);
+ dev_info(dev, "comedi_: usbdux%d "
+ "has been successfully initialised.\n", index);
/* success */
return 0;
}
struct usb_device *udev = interface_to_usbdev(intf);
if (!usbduxsub_tmp) {
- printk("comedi_: usbdux: disconnect called with null pointer.\n");
+ dev_err(&intf->dev,
+ "comedi_: disconnect called with null pointer.\n");
return;
}
if (usbduxsub_tmp->usbdev != udev) {
- printk("comedi_: usbdux: BUG! called with wrong ptr!!!\n");
+ dev_err(&intf->dev,
+ "comedi_: BUG! called with wrong ptr!!!\n");
return;
}
down(&start_stop_sem);
tidy_up(usbduxsub_tmp);
up(&usbduxsub_tmp->sem);
up(&start_stop_sem);
-#ifdef CONFIG_COMEDI_DEBUG
- printk("comedi_: usbdux: disconnected from the usb\n");
-#endif
+ dev_dbg(&intf->dev, "comedi_: disconnected from the usb\n");
}
/* is called when comedi-config is called */
int ret;
int index;
int i;
+ usbduxsub_t *udev;
+
comedi_subdevice *s = NULL;
dev->private = NULL;
}
if (index < 0) {
- printk("comedi%d: usbdux: error: attach failed, no usbdux devs connected to the usb bus.\n", dev->minor);
+ printk(KERN_ERR "comedi%d: usbdux: error: attach failed, no "
+ "usbdux devs connected to the usb bus.\n", dev->minor);
up(&start_stop_sem);
return -ENODEV;
}
- down(&(usbduxsub[index].sem));
+ udev = &usbduxsub[index];
+ down(&udev->sem);
/* pointer back to the corresponding comedi device */
- usbduxsub[index].comedidev = dev;
+ udev->comedidev = dev;
/* trying to upload the firmware into the chip */
if (comedi_aux_data(it->options, 0) &&
it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]) {
- read_firmware(usbduxsub + index,
- comedi_aux_data(it->options, 0),
- it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]);
+ read_firmware(udev, comedi_aux_data(it->options, 0),
+ it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]);
}
dev->board_name = BOARDNAME;
/* set number of subdevices */
- if (usbduxsub[index].high_speed) {
+ if (udev->high_speed) {
/* with pwm */
dev->n_subdevices = 5;
} else {
/* allocate space for the subdevices */
if ((ret = alloc_subdevices(dev, dev->n_subdevices)) < 0) {
- printk("comedi%d: usbdux: error alloc space for subdev\n",
- dev->minor);
+ dev_err(&udev->interface->dev,
+ "comedi%d: error alloc space for subdev\n", dev->minor);
up(&start_stop_sem);
return ret;
}
- printk("comedi%d: usbdux: usb-device %d is attached to comedi.\n",
+ dev_info(&udev->interface->dev,
+ "comedi%d: usb-device %d is attached to comedi.\n",
dev->minor, index);
/* private structure is also simply the usb-structure */
- dev->private = usbduxsub + index;
+ dev->private = udev;
/* the first subdevice is the A/D converter */
s = dev->subdevices + SUBDEV_AD;
s->insn_write = usbdux_counter_write;
s->insn_config = usbdux_counter_config;
- if (usbduxsub[index].high_speed) {
+ if (udev->high_speed) {
/* timer / pwm */
s = dev->subdevices + SUBDEV_PWM;
s->type = COMEDI_SUBD_PWM;
s->subdev_flags = SDF_WRITABLE | SDF_PWM_HBRIDGE;
s->n_chan = 8;
/* this defines the max duty cycle resolution */
- s->maxdata = usbduxsub[index].sizePwmBuf;
+ s->maxdata = udev->sizePwmBuf;
s->insn_write = usbdux_pwm_write;
s->insn_read = usbdux_pwm_read;
s->insn_config = usbdux_pwm_config;
usbdux_pwm_period(dev, s, PWM_DEFAULT_PERIOD);
}
/* finally decide that it's attached */
- usbduxsub[index].attached = 1;
+ udev->attached = 1;
- up(&(usbduxsub[index].sem));
+ up(&udev->sem);
up(&start_stop_sem);
- printk("comedi%d: attached to usbdux.\n", dev->minor);
+ dev_info(&udev->interface->dev, "comedi%d: attached to usbdux.\n",
+ dev->minor);
return 0;
}
{
usbduxsub_t *usbduxsub_tmp;
-#ifdef CONFIG_COMEDI_DEBUG
- printk("comedi%d: usbdux: detach usb device\n", dev->minor);
-#endif
-
if (!dev) {
- printk("comedi?: usbdux: detach without dev variable...\n");
+ printk(KERN_ERR
+ "comedi?: usbdux: detach without dev variable...\n");
return -EFAULT;
}
usbduxsub_tmp = dev->private;
if (!usbduxsub_tmp) {
- printk("comedi?: usbdux: detach without ptr to usbduxsub[]\n");
+ printk(KERN_ERR
+ "comedi?: usbdux: detach without ptr to usbduxsub[]\n");
return -EFAULT;
}
+ dev_dbg(&usbduxsub_tmp->interface->dev, "comedi%d: detach usb device\n",
+ dev->minor);
+
down(&usbduxsub_tmp->sem);
/* Don't allow detach to free the private structure */
/* It's one entry of of usbduxsub[] */
dev->private = NULL;
usbduxsub_tmp->attached = 0;
usbduxsub_tmp->comedidev = NULL;
-#ifdef CONFIG_COMEDI_DEBUG
- printk("comedi%d: usbdux: detach: successfully removed\n", dev->minor);
-#endif
+ dev_dbg(&usbduxsub_tmp->interface->dev,
+ "comedi%d: detach: successfully removed\n", dev->minor);
up(&usbduxsub_tmp->sem);
return 0;
}
static void init_usb_devices(void)
{
int index;
-#ifdef CONFIG_COMEDI_DEBUG
- printk("comedi_: usbdux: setting all possible devs to invalid\n");
-#endif
+
/* all devices entries are invalid to begin with */
/* they will become valid by the probe function */
/* and then finally by the attach-function */
projects / linux-2.6-omap-h63xx.git / commitdiff