powerpc/83xx: fix ULPI setup for MPC8315 processors

We must not use MPC831X_SICR[HL]_* definitions for the MPC8315 processors,
because SICR USB bits locations are not compatible with MPC8313.

This patch fixes ULPI workability on MPC8315E-RDB boards.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 393dfecdbf53db57cf535b6deefa9f4441dca342..2a7cbabb410a89ead86b06b481eedd8b3673a8ba 100644 (file)
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -26,6 +26,8 @@
 #define MPC834X_SICRL_USB1         0x20000000
 #define MPC831X_SICRL_USB_MASK     0x00000c00
 #define MPC831X_SICRL_USB_ULPI     0x00000800
+#define MPC8315_SICRL_USB_MASK     0x000000fc
+#define MPC8315_SICRL_USB_ULPI     0x00000054
 #define MPC837X_SICRL_USB_MASK     0xf0000000
 #define MPC837X_SICRL_USB_ULPI     0x50000000
 
@@ -34,6 +36,8 @@
 #define MPC834X_SICRH_USB_UTMI     0x00020000
 #define MPC831X_SICRH_USB_MASK     0x000000e0
 #define MPC831X_SICRH_USB_ULPI     0x000000a0
+#define MPC8315_SICRH_USB_MASK     0x0000ff00
+#define MPC8315_SICRH_USB_ULPI     0x00000000
 
 /* USB Control Register */
 #define FSL_USB2_CONTROL_OFFS      0x500

diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
index 64bcf0a33c71903fa3978de2c28d9b4df8c4bbba..cc99c280aad943ea93631a51de1399db5a90565a 100644 (file)
--- a/arch/powerpc/platforms/83xx/usb.c
+++ b/arch/powerpc/platforms/83xx/usb.c
@@ -137,15 +137,21 @@ int mpc831x_usb_cfg(void)
 
        /* Configure pin mux for ULPI.  There is no pin mux for UTMI */
        if (prop && !strcmp(prop, "ulpi")) {
-               temp = in_be32(immap + MPC83XX_SICRL_OFFS);
-               temp &= ~MPC831X_SICRL_USB_MASK;
-               temp |= MPC831X_SICRL_USB_ULPI;
-               out_be32(immap + MPC83XX_SICRL_OFFS, temp);
-
-               temp = in_be32(immap + MPC83XX_SICRH_OFFS);
-               temp &= ~MPC831X_SICRH_USB_MASK;
-               temp |= MPC831X_SICRH_USB_ULPI;
-               out_be32(immap + MPC83XX_SICRH_OFFS, temp);
+               if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) {
+                       clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
+                                       MPC8315_SICRL_USB_MASK,
+                                       MPC8315_SICRL_USB_ULPI);
+                       clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
+                                       MPC8315_SICRH_USB_MASK,
+                                       MPC8315_SICRH_USB_ULPI);
+               } else {
+                       clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
+                                       MPC831X_SICRL_USB_MASK,
+                                       MPC831X_SICRL_USB_ULPI);
+                       clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
+                                       MPC831X_SICRH_USB_MASK,
+                                       MPC831X_SICRH_USB_ULPI);
+               }
        }
 
        iounmap(immap);