]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
rtc-ds1307 becomes new-style i2c driver
authorDavid Brownell <david-b@pacbell.net>
Tue, 17 Jul 2007 11:05:10 +0000 (04:05 -0700)
committerLinus Torvalds <torvalds@woody.linux-foundation.org>
Tue, 17 Jul 2007 17:23:09 +0000 (10:23 -0700)
Convert the rtc-ds1307 driver into a "new style" driver.

Also improve probe() checks:  be more correct about switching out of
AM/PM mode, and issue a (debug) diagnostic when failing due to bogus
register values.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Andrew Victor <andrew@sanpeople.com>
Cc: Bill Gatliff <bgat@billgatliff.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/rtc/rtc-ds1307.c

index 5306a1a5b873a54cb0937eb569e16057dbe83698..5158a625671f8f4a1de2330cd22b25ed32ea9e4b 100644 (file)
  * This is currently a simple no-alarms driver.  If your board has the
  * alarm irq wired up on a ds1337 or ds1339, and you want to use that,
  * then look at the rtc-rs5c372 driver for code to steal...
- *
- * If the I2C "force" mechanism is used, we assume the chip is a ds1337.
- * (Much better would be board-specific tables of I2C devices, along with
- * the platform_data drivers would use to sort such issues out.)
  */
 enum ds_type {
-       unknown = 0,
        ds_1307,
        ds_1337,
        ds_1338,
@@ -43,11 +38,6 @@ enum ds_type {
        // rs5c372 too?  different address...
 };
 
-static unsigned short normal_i2c[] = { 0x68, I2C_CLIENT_END };
-
-I2C_CLIENT_INSMOD;
-
-
 
 /* RTC registers don't differ much, except for the century flag */
 #define DS1307_REG_SECS                0x00    /* 00-59 */
@@ -55,6 +45,8 @@ I2C_CLIENT_INSMOD;
 #      define DS1340_BIT_nEOSC         0x80
 #define DS1307_REG_MIN         0x01    /* 00-59 */
 #define DS1307_REG_HOUR                0x02    /* 00-23, or 1-12{am,pm} */
+#      define DS1307_BIT_12HR          0x40    /* in REG_HOUR */
+#      define DS1307_BIT_PM            0x20    /* in REG_HOUR */
 #      define DS1340_BIT_CENTURY_EN    0x80    /* in REG_HOUR */
 #      define DS1340_BIT_CENTURY       0x40    /* in REG_HOUR */
 #define DS1307_REG_WDAY                0x03    /* 01-07 */
@@ -252,39 +244,27 @@ static const struct rtc_class_ops ds13xx_rtc_ops = {
 
 static struct i2c_driver ds1307_driver;
 
-static int __devinit
-ds1307_detect(struct i2c_adapter *adapter, int address, int kind)
+static int __devinit ds1307_probe(struct i2c_client *client)
 {
        struct ds1307           *ds1307;
        int                     err = -ENODEV;
-       struct i2c_client       *client;
        int                     tmp;
        const struct chip_desc  *chip;
+       struct i2c_adapter      *adapter = to_i2c_adapter(client->dev.parent);
 
-       if (!(ds1307 = kzalloc(sizeof(struct ds1307), GFP_KERNEL))) {
-               err = -ENOMEM;
-               goto exit;
+       chip = find_chip(client->name);
+       if (!chip) {
+               dev_err(&client->dev, "unknown chip type '%s'\n",
+                               client->name);
+               return -ENODEV;
        }
 
-       /* REVISIT:  pending driver model conversion, set up "client"
-        * ourselves, and use a hack to determine the RTC type (instead
-        * of reading the client->name we're given)
-        */
-       client = &ds1307->dev;
-       client->addr = address;
-       client->adapter = adapter;
-       client->driver = &ds1307_driver;
-
-       /* HACK: "force" implies "needs ds1337-style-oscillator setup", and
-        * that's the only kind of chip setup we'll know about.  Until the
-        * driver model conversion, here's where to add any board-specific
-        * code to say what kind of chip is present...
-        */
-       if (kind >= 0)
-               chip = find_chip("ds1337");
-       else
-               chip = find_chip("ds1307");
-       strlcpy(client->name, chip->name, I2C_NAME_SIZE);
+       if (!i2c_check_functionality(adapter,
+                       I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+               return -EIO;
+
+       if (!(ds1307 = kzalloc(sizeof(struct ds1307), GFP_KERNEL)))
+               return -ENOMEM;
 
        ds1307->client = client;
        i2c_set_clientdata(client, ds1307);
@@ -378,94 +358,92 @@ read_rtc:
                        goto read_rtc;
                }
                break;
-       default:
+       case ds_1337:
+       case ds_1339:
                break;
        }
 
        tmp = ds1307->regs[DS1307_REG_SECS];
        tmp = BCD2BIN(tmp & 0x7f);
        if (tmp > 60)
-               goto exit_free;
+               goto exit_bad;
        tmp = BCD2BIN(ds1307->regs[DS1307_REG_MIN] & 0x7f);
        if (tmp > 60)
-               goto exit_free;
+               goto exit_bad;
 
        tmp = BCD2BIN(ds1307->regs[DS1307_REG_MDAY] & 0x3f);
        if (tmp == 0 || tmp > 31)
-               goto exit_free;
+               goto exit_bad;
 
        tmp = BCD2BIN(ds1307->regs[DS1307_REG_MONTH] & 0x1f);
        if (tmp == 0 || tmp > 12)
-               goto exit_free;
+               goto exit_bad;
 
-       /* force into in 24 hour mode (most chips) or
-        * disable century bit (ds1340)
-        *
-        * REVISIT forcing 24 hour mode can prevent multi-master
-        * configs from sharing this RTC ... don't do this.
-        * The clock needs to be reset after changing it, too...
-        */
        tmp = ds1307->regs[DS1307_REG_HOUR];
-       if (tmp & (1 << 6)) {
-               if (tmp & (1 << 5))
-                       tmp = BCD2BIN(tmp & 0x1f) + 12;
-               else
-                       tmp = BCD2BIN(tmp);
+       switch (ds1307->type) {
+       case ds_1340:
+       case m41t00:
+               /* NOTE: ignores century bits; fix before deploying
+                * systems that will run through year 2100.
+                */
+               break;
+       default:
+               if (!(tmp & DS1307_BIT_12HR))
+                       break;
+
+               /* Be sure we're in 24 hour mode.  Multi-master systems
+                * take note...
+                */
+               tmp = BCD2BIN(tmp & 0x1f);
+               if (tmp == 12)
+                       tmp = 0;
+               if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
+                       tmp += 12;
                i2c_smbus_write_byte_data(client,
                                DS1307_REG_HOUR,
                                BIN2BCD(tmp));
        }
 
-       /* Tell the I2C layer a new client has arrived */
-       if ((err = i2c_attach_client(client)))
-               goto exit_free;
-
        ds1307->rtc = rtc_device_register(client->name, &client->dev,
                                &ds13xx_rtc_ops, THIS_MODULE);
        if (IS_ERR(ds1307->rtc)) {
                err = PTR_ERR(ds1307->rtc);
                dev_err(&client->dev,
                        "unable to register the class device\n");
-               goto exit_detach;
+               goto exit_free;
        }
 
        return 0;
 
-exit_detach:
-       i2c_detach_client(client);
+exit_bad:
+       dev_dbg(&client->dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n",
+                       "bogus register",
+                       ds1307->regs[0], ds1307->regs[1],
+                       ds1307->regs[2], ds1307->regs[3],
+                       ds1307->regs[4], ds1307->regs[5],
+                       ds1307->regs[6]);
+
 exit_free:
        kfree(ds1307);
-exit:
        return err;
 }
 
-static int __devinit
-ds1307_attach_adapter(struct i2c_adapter *adapter)
-{
-       if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
-               return 0;
-       return i2c_probe(adapter, &addr_data, ds1307_detect);
-}
-
-static int __devexit ds1307_detach_client(struct i2c_client *client)
+static int __devexit ds1307_remove(struct i2c_client *client)
 {
-       int             err;
        struct ds1307   *ds1307 = i2c_get_clientdata(client);
 
        rtc_device_unregister(ds1307->rtc);
-       if ((err = i2c_detach_client(client)))
-               return err;
        kfree(ds1307);
        return 0;
 }
 
 static struct i2c_driver ds1307_driver = {
        .driver = {
-               .name   = "ds1307",
+               .name   = "rtc-ds1307",
                .owner  = THIS_MODULE,
        },
-       .attach_adapter = ds1307_attach_adapter,
-       .detach_client  = __devexit_p(ds1307_detach_client),
+       .probe          = ds1307_probe,
+       .remove         = __devexit_p(ds1307_remove),
 };
 
 static int __init ds1307_init(void)