PCI: Document that most pci options are shared between i386 and x86-64

Since the code is shared pretty much most of the pci= options are shared,
but kernel-parameters.txt marked most of them as i386 only.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 0f1544f67400b4288887649bf73b9fb09449b92c..08fbc8372ba45e4fe42d839358053f670f22a4eb 100644 (file)
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -101,6 +101,7 @@ parameter is applicable:
        X86-64  X86-64 architecture is enabled.
                        More X86-64 boot options can be found in
                        Documentation/x86_64/boot-options.txt .
+       X86     Either 32bit or 64bit x86 (same as X86-32+X86-64)
 
 In addition, the following text indicates that the option:
 
@@ -1588,7 +1589,7 @@ and is between 256 and 4096 characters. It is defined in the file
                        See also Documentation/paride.txt.
 
        pci=option[,option...]  [PCI] various PCI subsystem options:
-               off             [X86-32] don't probe for the PCI bus
+               off             [X86] don't probe for the PCI bus
                bios            [X86-32] force use of PCI BIOS, don't access
                                the hardware directly. Use this if your machine
                                has a non-standard PCI host bridge.
@@ -1596,9 +1597,9 @@ and is between 256 and 4096 characters. It is defined in the file
                                hardware access methods are allowed. Use this
                                if you experience crashes upon bootup and you
                                suspect they are caused by the BIOS.
-               conf1           [X86-32] Force use of PCI Configuration
+               conf1           [X86] Force use of PCI Configuration
                                Mechanism 1.
-               conf2           [X86-32] Force use of PCI Configuration
+               conf2           [X86] Force use of PCI Configuration
                                Mechanism 2.
                noaer           [PCIE] If the PCIEAER kernel config parameter is
                                enabled, this kernel boot option can be used to
@@ -1618,37 +1619,37 @@ and is between 256 and 4096 characters. It is defined in the file
                                this option if the kernel is unable to allocate
                                IRQs or discover secondary PCI buses on your
                                motherboard.
-               rom             [X86-32] Assign address space to expansion ROMs.
+               rom             [X86] Assign address space to expansion ROMs.
                                Use with caution as certain devices share
                                address decoders between ROMs and other
                                resources.
-               norom           [X86-32,X86_64] Do not assign address space to
+               norom           [X86] Do not assign address space to
                                expansion ROMs that do not already have
                                BIOS assigned address ranges.
-               irqmask=0xMMMM  [X86-32] Set a bit mask of IRQs allowed to be
+               irqmask=0xMMMM  [X86] Set a bit mask of IRQs allowed to be
                                assigned automatically to PCI devices. You can
                                make the kernel exclude IRQs of your ISA cards
                                this way.
-               pirqaddr=0xAAAAA        [X86-32] Specify the physical address
+               pirqaddr=0xAAAAA        [X86] Specify the physical address
                                of the PIRQ table (normally generated
                                by the BIOS) if it is outside the
                                F0000h-100000h range.
-               lastbus=N       [X86-32] Scan all buses thru bus #N. Can be
+               lastbus=N       [X86] Scan all buses thru bus #N. Can be
                                useful if the kernel is unable to find your
                                secondary buses and you want to tell it
                                explicitly which ones they are.
-               assign-busses   [X86-32] Always assign all PCI bus
+               assign-busses   [X86] Always assign all PCI bus
                                numbers ourselves, overriding
                                whatever the firmware may have done.
-               usepirqmask     [X86-32] Honor the possible IRQ mask stored
+               usepirqmask     [X86] Honor the possible IRQ mask stored
                                in the BIOS $PIR table. This is needed on
                                some systems with broken BIOSes, notably
                                some HP Pavilion N5400 and Omnibook XE3
                                notebooks. This will have no effect if ACPI
                                IRQ routing is enabled.
-               noacpi          [X86-32] Do not use ACPI for IRQ routing
+               noacpi          [X86] Do not use ACPI for IRQ routing
                                or for PCI scanning.
-               use_crs         [X86-32] Use _CRS for PCI resource
+               use_crs         [X86] Use _CRS for PCI resource
                                allocation.
                routeirq        Do IRQ routing for all PCI devices.
                                This is normally done in pci_enable_device(),