]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[POWERPC] Remove PCI-e errata for MPC8641 silicon ver 1.0
authorZhang Wei <wei.zhang@freescale.com>
Tue, 22 May 2007 03:38:26 +0000 (11:38 +0800)
committerKumar Gala <galak@kernel.crashing.org>
Fri, 29 Jun 2007 06:58:17 +0000 (01:58 -0500)
Remove errata for PCI-e support of Rev 1.0 of MPC8641 since its considered
obselete and is not production level silicon from Freescale.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Acked-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
arch/powerpc/Kconfig
arch/powerpc/boot/dts/mpc8641_hpcn.dts
arch/powerpc/platforms/86xx/mpc86xx.h
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
arch/powerpc/platforms/86xx/pci.c
arch/powerpc/platforms/Kconfig
arch/powerpc/sysdev/Makefile
arch/powerpc/sysdev/fsl_pcie.c [deleted file]

index 7c1bae5c220418516ff3c8cba3c924411d60e5ce..cbfbd981cdcd299b87a47ef0d5e30d33f25f2e8a 100644 (file)
@@ -419,10 +419,6 @@ config SBUS
 config FSL_SOC
        bool
 
-config FSL_PCIE
-       bool
-       depends on PPC_86xx
-
 # Yes MCA RS/6000s exist but Linux-PPC does not currently support any
 config MCA
        bool
index 260b264c869eeffc0b8aaebc52d25edca645fb23..748f7b90f5dbc1d0289a8e3bdce3ce1f71d6aef4 100644 (file)
                        #size-cells = <2>;
                        #address-cells = <3>;
                        reg = <8000 1000>;
-                       bus-range = <0 fe>;
+                       bus-range = <0 ff>;
                        ranges = <02000000 0 80000000 80000000 0 20000000
                                  01000000 0 00000000 e2000000 0 00100000>;
                        clock-frequency = <1fca055>;
index 4c2789de045e22c5423e842e63d54f348c905a4a..23f7ed2a7f884b9583f131929344f634bc976394 100644 (file)
@@ -20,12 +20,6 @@ extern int mpc86xx_add_bridge(struct device_node *dev);
 extern int mpc86xx_exclude_device(struct pci_controller *hose,
                                  u_char bus, u_char devfn);
 
-extern void setup_indirect_pcie(struct pci_controller *hose,
-                                      u32 cfg_addr, u32 cfg_data);
-extern void setup_indirect_pcie_nomap(struct pci_controller *hose,
-                                            void __iomem *cfg_addr,
-                                            void __iomem *cfg_data);
-
 extern void __init mpc86xx_smp_init(void);
 
 #endif /* __MPC86XX_H__ */
index 042dbce89771cfa19bc34842c77b04e97219b754..afa82371979faeaa73da788424ef784cbb9a5a67 100644 (file)
@@ -358,8 +358,6 @@ mpc86xx_hpcn_setup_arch(void)
 #ifdef CONFIG_PCI
        for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
                mpc86xx_add_bridge(np);
-
-       ppc_md.pci_exclude_device = mpc86xx_exclude_device;
 #endif
 
        printk("MPC86xx HPCN board from Freescale Semiconductor\n");
index 7659259cc974a075edce31a5a1cb6c0824154c9c..0db51e8ab5d42d05a7b3b4d42db5b7c1900494fb 100644 (file)
@@ -133,19 +133,6 @@ mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size)
        early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd);
 
        early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
-
-       /* PCIE Bus, Fix the MPC8641D host bridge's location to bus 0xFF. */
-       early_read_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, &temps);
-       temps = (temps & 0xff000000) | (0xff) | (0x0 << 8) | (0xfe << 16);
-       early_write_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, temps);
-}
-
-int mpc86xx_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn)
-{
-       if (bus == 0 && PCI_SLOT(devfn) == 0)
-               return PCIBIOS_DEVICE_NOT_FOUND;
-
-       return PCIBIOS_SUCCESSFUL;
 }
 
 int __init mpc86xx_add_bridge(struct device_node *dev)
@@ -173,11 +160,10 @@ int __init mpc86xx_add_bridge(struct device_node *dev)
                return -ENOMEM;
        hose->arch_data = dev;
 
-       /* last_busno = 0xfe cause by MPC8641 PCIE bug */
        hose->first_busno = bus_range ? bus_range[0] : 0x0;
-       hose->last_busno = bus_range ? bus_range[1] : 0xfe;
+       hose->last_busno = bus_range ? bus_range[1] : 0xff;
 
-       setup_indirect_pcie(hose, rsrc.start, rsrc.start + 0x4);
+       setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4);
 
        /* Setup the PCIE host controller. */
        mpc86xx_setup_pcie(hose, rsrc.start, rsrc.end - rsrc.start + 1);
index df67ff50c0da0172e801f83f7275d6b214188b2b..33545d352e9234af9d2d08e0820450bb31aef5be 100644 (file)
@@ -31,7 +31,6 @@ config PPC_86xx
        bool "Freescale 86xx"
        depends on 6xx
        select FSL_SOC
-       select FSL_PCIE
        select ALTIVEC
        help
          The Freescale E600 SoCs have 74xx cores.
index 337b56a732474450f5a6635a8429c8473bb471d8..7d8ac1bfef846195dba9bc5221cc7a551935b577 100644 (file)
@@ -12,7 +12,6 @@ obj-$(CONFIG_PPC_PMI)         += pmi.o
 obj-$(CONFIG_U3_DART)          += dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)       += mmio_nvram.o
 obj-$(CONFIG_FSL_SOC)          += fsl_soc.o
-obj-$(CONFIG_FSL_PCIE)         += fsl_pcie.o
 obj-$(CONFIG_TSI108_BRIDGE)    += tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_QUICC_ENGINE)     += qe_lib/
 mv64x60-$(CONFIG_PCI)          += mv64x60_pci.o
diff --git a/arch/powerpc/sysdev/fsl_pcie.c b/arch/powerpc/sysdev/fsl_pcie.c
deleted file mode 100644 (file)
index ea3ec6b..0000000
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Support for indirect PCI bridges.
- *
- * Copyright (C) 1998 Gabriel Paubert.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * "Temporary" MPC8548 Errata file -
- * The standard indirect_pci code should work with future silicon versions.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-
-#define PCI_CFG_OUT out_be32
-
-/* ERRATA PCI-Ex 14 PCIE Controller timeout */
-#define PCIE_FIX               out_be32(hose->cfg_addr+0x4, 0x0400ffff)
-
-
-static int
-indirect_read_config_pcie(struct pci_bus *bus, unsigned int devfn, int offset,
-                    int len, u32 *val)
-{
-       struct pci_controller *hose = bus->sysdata;
-       volatile void __iomem *cfg_data;
-       u32 temp;
-
-       if (ppc_md.pci_exclude_device)
-               if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
-                       return PCIBIOS_DEVICE_NOT_FOUND;
-
-       /* Possible artifact of CDCpp50937 needs further investigation */
-       if (devfn != 0x0 && bus->number == 0xff)
-               return PCIBIOS_DEVICE_NOT_FOUND;
-
-       PCIE_FIX;
-       if (bus->number == 0xff) {
-               PCI_CFG_OUT(hose->cfg_addr,
-                           (0x80000000 | ((offset & 0xf00) << 16) |
-                            (bus->number<< 16)
-                            | (devfn << 8) | ((offset & 0xfc) )));
-       } else {
-               PCI_CFG_OUT(hose->cfg_addr,
-                           (0x80000001 | ((offset & 0xf00) << 16) |
-                            (bus->number<< 16)
-                            | (devfn << 8) | ((offset & 0xfc) )));
-       }
-
-       /*
-        * Note: the caller has already checked that offset is
-        * suitably aligned and that len is 1, 2 or 4.
-        */
-       /* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */
-       cfg_data = hose->cfg_data;
-       PCIE_FIX;
-       temp = in_le32(cfg_data);
-       switch (len) {
-       case 1:
-               *val = (temp >> (((offset & 3))*8)) & 0xff;
-               break;
-       case 2:
-               *val = (temp >> (((offset & 3))*8)) & 0xffff;
-               break;
-       default:
-               *val = temp;
-               break;
-       }
-       return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-indirect_write_config_pcie(struct pci_bus *bus, unsigned int devfn, int offset,
-                     int len, u32 val)
-{
-       struct pci_controller *hose = bus->sysdata;
-       volatile void __iomem *cfg_data;
-       u32 temp;
-
-       if (ppc_md.pci_exclude_device)
-               if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
-                       return PCIBIOS_DEVICE_NOT_FOUND;
-
-       /* Possible artifact of CDCpp50937 needs further investigation */
-       if (devfn != 0x0 && bus->number == 0xff)
-               return PCIBIOS_DEVICE_NOT_FOUND;
-
-       PCIE_FIX;
-       if (bus->number == 0xff) {
-               PCI_CFG_OUT(hose->cfg_addr,
-                           (0x80000000 | ((offset & 0xf00) << 16) |
-                            (bus->number << 16)
-                            | (devfn << 8) | ((offset & 0xfc) )));
-       } else {
-               PCI_CFG_OUT(hose->cfg_addr,
-                           (0x80000001 | ((offset & 0xf00) << 16) |
-                            (bus->number << 16)
-                            | (devfn << 8) | ((offset & 0xfc) )));
-        }
-
-       /*
-        * Note: the caller has already checked that offset is
-        * suitably aligned and that len is 1, 2 or 4.
-        */
-       /* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */
-       cfg_data = hose->cfg_data;
-       switch (len) {
-       case 1:
-               PCIE_FIX;
-               temp = in_le32(cfg_data);
-               temp = (temp & ~(0xff << ((offset & 3) * 8))) |
-                       (val << ((offset & 3) * 8));
-               PCIE_FIX;
-               out_le32(cfg_data, temp);
-               break;
-       case 2:
-               PCIE_FIX;
-               temp = in_le32(cfg_data);
-               temp = (temp & ~(0xffff << ((offset & 3) * 8)));
-               temp |= (val << ((offset & 3) * 8)) ;
-               PCIE_FIX;
-               out_le32(cfg_data, temp);
-               break;
-       default:
-               PCIE_FIX;
-               out_le32(cfg_data, val);
-               break;
-       }
-       PCIE_FIX;
-       return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops indirect_pcie_ops = {
-       indirect_read_config_pcie,
-       indirect_write_config_pcie
-};
-
-void __init
-setup_indirect_pcie_nomap(struct pci_controller* hose, void __iomem * cfg_addr,
-       void __iomem * cfg_data)
-{
-       hose->cfg_addr = cfg_addr;
-       hose->cfg_data = cfg_data;
-       hose->ops = &indirect_pcie_ops;
-}
-
-void __init
-setup_indirect_pcie(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
-{
-       unsigned long base = cfg_addr & PAGE_MASK;
-       void __iomem *mbase, *addr, *data;
-
-       mbase = ioremap(base, PAGE_SIZE);
-       addr = mbase + (cfg_addr & ~PAGE_MASK);
-       if ((cfg_data & PAGE_MASK) != base)
-               mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
-       data = mbase + (cfg_data & ~PAGE_MASK);
-       setup_indirect_pcie_nomap(hose, addr, data);
-}