[ALSA] HDA - Add support for the OQO Model 2

This patch adds support for the OQO Model 2 Ultra Mobile PC.

Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index caf48edaa921f629870b5e39bc4e83a94d56c52d..4c3c4e6ce3d67c74d22c5bc4f9579f85465ff849 100644 (file)
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -39,6 +39,7 @@
 
 enum {
        STAC_REF,
+       STAC_9200_OQO,
        STAC_9200_DELL_D21,
        STAC_9200_DELL_D22,
        STAC_9200_DELL_D23,
@@ -1052,9 +1053,15 @@ static unsigned int dell9200_m27_pin_configs[8] = {
        0x90170310, 0x04a11020, 0x90170310, 0x40f003fc,
 };
 
+static unsigned int oqo9200_pin_configs[8] = {
+       0x40c000f0, 0x404000f1, 0x0221121f, 0x02211210,
+       0x90170111, 0x90a70120, 0x400000f2, 0x400000f3,
+};
+
 
 static unsigned int *stac9200_brd_tbl[STAC_9200_MODELS] = {
        [STAC_REF] = ref9200_pin_configs,
+       [STAC_9200_OQO] = oqo9200_pin_configs,
        [STAC_9200_DELL_D21] = dell9200_d21_pin_configs,
        [STAC_9200_DELL_D22] = dell9200_d22_pin_configs,
        [STAC_9200_DELL_D23] = dell9200_d23_pin_configs,
@@ -1069,6 +1076,7 @@ static unsigned int *stac9200_brd_tbl[STAC_9200_MODELS] = {
 
 static const char *stac9200_models[STAC_9200_MODELS] = {
        [STAC_REF] = "ref",
+       [STAC_9200_OQO] = "oqo",
        [STAC_9200_DELL_D21] = "dell-d21",
        [STAC_9200_DELL_D22] = "dell-d22",
        [STAC_9200_DELL_D23] = "dell-d23",
@@ -1153,6 +1161,8 @@ static struct snd_pci_quirk stac9200_cfg_tbl[] = {
                      STAC_9200_GATEWAY),
        SND_PCI_QUIRK(0x107b, 0x0318, "Gateway ML3019, MT3707",
                      STAC_9200_GATEWAY),
+       /* OQO Mobile */
+       SND_PCI_QUIRK(0x1106, 0x3288, "OQO Model 2", STAC_9200_OQO),
        {} /* terminator */
 };
 
@@ -3147,7 +3157,8 @@ static int patch_stac9200(struct hda_codec *codec)
        spec->num_adcs = 1;
        spec->num_pwrs = 0;
 
-       if (spec->board_config == STAC_9200_GATEWAY)
+       if (spec->board_config == STAC_9200_GATEWAY ||
+           spec->board_config == STAC_9200_OQO)
                spec->init = stac9200_eapd_init;
        else
                spec->init = stac9200_core_init;