]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
powerpc/5200: Add support for the digsy MTC board.
authorGrzegorz Bernacki <gjb@semihalf.com>
Wed, 4 Feb 2009 20:39:17 +0000 (13:39 -0700)
committerGrant Likely <grant.likely@secretlab.ca>
Wed, 4 Feb 2009 20:39:17 +0000 (13:39 -0700)
Board support for the InterControl Digsy-MTC device based on the MPC5200B SoC.

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
arch/powerpc/boot/dts/digsy_mtc.dts [new file with mode: 0644]
arch/powerpc/platforms/52xx/Kconfig
arch/powerpc/platforms/52xx/mpc5200_simple.c

diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
new file mode 100644 (file)
index 0000000..0e85ebf
--- /dev/null
@@ -0,0 +1,254 @@
+/*
+ * Digsy MTC board Device Tree Source
+ *
+ * Copyright (C) 2009 Semihalf
+ *
+ * Based on the CM5200 by M. Balakowicz
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+       model = "intercontrol,digsy-mtc";
+       compatible = "intercontrol,digsy-mtc";
+       #address-cells = <1>;
+       #size-cells = <1>;
+       interrupt-parent = <&mpc5200_pic>;
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               PowerPC,5200@0 {
+                       device_type = "cpu";
+                       reg = <0>;
+                       d-cache-line-size = <32>;
+                       i-cache-line-size = <32>;
+                       d-cache-size = <0x4000>;                // L1, 16K
+                       i-cache-size = <0x4000>;                // L1, 16K
+                       timebase-frequency = <0>;       // from bootloader
+                       bus-frequency = <0>;            // from bootloader
+                       clock-frequency = <0>;          // from bootloader
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0x00000000 0x02000000>;  // 32MB
+       };
+
+       soc5200@f0000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "fsl,mpc5200b-immr";
+               ranges = <0 0xf0000000 0x0000c000>;
+               reg = <0xf0000000 0x00000100>;
+               bus-frequency = <0>;            // from bootloader
+               system-frequency = <0>;         // from bootloader
+
+               cdm@200 {
+                       compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+                       reg = <0x200 0x38>;
+               };
+
+               mpc5200_pic: interrupt-controller@500 {
+                       // 5200 interrupts are encoded into two levels;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+                       compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+                       reg = <0x500 0x80>;
+               };
+
+               timer@600 {     // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <0x600 0x10>;
+                       interrupts = <1 9 0>;
+                       fsl,has-wdt;
+               };
+
+               timer@610 {     // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <0x610 0x10>;
+                       interrupts = <1 10 0>;
+               };
+
+               timer@620 {     // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <0x620 0x10>;
+                       interrupts = <1 11 0>;
+               };
+
+               timer@630 {     // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <0x630 0x10>;
+                       interrupts = <1 12 0>;
+               };
+
+               timer@640 {     // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <0x640 0x10>;
+                       interrupts = <1 13 0>;
+               };
+
+               timer@650 {     // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <0x650 0x10>;
+                       interrupts = <1 14 0>;
+               };
+
+               timer@660 {     // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <0x660 0x10>;
+                       interrupts = <1 15 0>;
+               };
+
+               timer@670 {     // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <0x670 0x10>;
+                       interrupts = <1 16 0>;
+               };
+
+               gpio_simple: gpio@b00 {
+                       compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+                       reg = <0xb00 0x40>;
+                       interrupts = <1 7 0>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+               };
+
+               gpio_wkup: gpio@c00 {
+                       compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+                       reg = <0xc00 0x40>;
+                       interrupts = <1 8 0 0 3 0>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+               };
+
+               spi@f00 {
+                       compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+                       reg = <0xf00 0x20>;
+                       interrupts = <2 13 0 2 14 0>;
+               };
+
+               usb@1000 {
+                       compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
+                       reg = <0x1000 0xff>;
+                       interrupts = <2 6 0>;
+               };
+
+               dma-controller@1200 {
+                       compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+                       reg = <0x1200 0x80>;
+                       interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+                                     3 4 0  3 5 0  3 6 0  3 7 0
+                                     3 8 0  3 9 0  3 10 0  3 11 0
+                                     3 12 0  3 13 0  3 14 0  3 15 0>;
+               };
+
+               xlb@1f00 {
+                       compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+                       reg = <0x1f00 0x100>;
+               };
+
+               serial@2400 {           // PSC3
+                       compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+                       reg = <0x2400 0x100>;
+                       interrupts = <2 3 0>;
+               };
+
+               serial@2600 {           // PSC4
+                       compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+                       reg = <0x2600 0x100>;
+                       interrupts = <2 11 0>;
+               };
+
+               ethernet@3000 {
+                       compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+                       reg = <0x3000 0x400>;
+                       local-mac-address = [ 00 00 00 00 00 00 ];
+                       interrupts = <2 5 0>;
+                       phy-handle = <&phy0>;
+               };
+
+               mdio@3000 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+                       reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
+                       interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+
+                       phy0: ethernet-phy@0 {
+                               reg = <0>;
+                       };
+               };
+
+               ata@3a00 {
+                       compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+                       reg = <0x3a00 0x100>;
+                       interrupts = <2 7 0>;
+               };
+
+               i2c@3d00 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+                       reg = <0x3d00 0x40>;
+                       interrupts = <2 15 0>;
+                       fsl5200-clocking;
+
+                       rtc@50 {
+                               compatible = "at,24c08";
+                               reg = <0x50>;
+                       };
+
+                       rtc@68 {
+                               compatible = "dallas,ds1339";
+                               reg = <0x68>;
+                       };
+               };
+
+               sram@8000 {
+                       compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+                       reg = <0x8000 0x4000>;
+               };
+       };
+
+       lpb {
+               compatible = "fsl,mpc5200b-lpb","simple-bus";
+               #address-cells = <2>;
+               #size-cells = <1>;
+               ranges = <0 0 0xff000000 0x1000000>;
+
+               // 16-bit flash device at LocalPlus Bus CS0
+               flash@0,0 {
+                       compatible = "cfi-flash";
+                       reg = <0 0 0x1000000>;
+                       bank-width = <2>;
+                       device-width = <2>;
+                       #size-cells = <1>;
+                       #address-cells = <1>;
+
+                       partition@0 {
+                               label = "kernel";
+                               reg = <0x0 0x00200000>;
+                       };
+                       partition@200000 {
+                               label = "root";
+                               reg = <0x00200000 0x00300000>;
+                       };
+                       partition@500000 {
+                               label = "user";
+                               reg = <0x00500000 0x00a00000>;
+                       };
+                       partition@f00000 {
+                               label = "u-boot";
+                               reg = <0x00f00000 0x100000>;
+                       };
+               };
+       };
+};
index c01db1316b01ae2fe8adb58f760ce0fef1e78d08..0465e5b36e6a97de744a134353496b7b926f01ca 100644 (file)
@@ -21,7 +21,12 @@ config PPC_MPC5200_SIMPLE
            and if there is a PCI bus node defined in the device tree.
 
          Boards that are compatible with this generic platform support
-         are: 'tqc,tqm5200', 'promess,motionpro', 'schindler,cm5200'.
+         are:
+            intercontrol,digsy-mtc
+            phytec,pcm030
+            promess,motionpro
+            schindler,cm5200
+            tqc,tqm5200
 
 config PPC_EFIKA
        bool "bPlan Efika 5k2. MPC5200B based computer"
index a3bda0b9f1ff791fcb259699dba91f82fe61cc9a..d5e1471e51f7ac2a42b3ca2b8690855280625c4d 100644 (file)
@@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void)
 
 /* list of the supported boards */
 static char *board[] __initdata = {
+       "intercontrol,digsy-mtc",
        "promess,motionpro",
        "phytec,pcm030",
        "schindler,cm5200",