[SCSI] sym53c8xx: Use pdev->revision

Auke missed the sym2 driver in his initial sweep.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

diff --git a/drivers/scsi/sym53c8xx_2/sym_fw.c b/drivers/scsi/sym53c8xx_2/sym_fw.c
index 9916a2a22558c992644505ff9b2ae193e0162c15..2be0ae17e06c230975ec27ba79f55881a63a1352 100644 (file)
--- a/drivers/scsi/sym53c8xx_2/sym_fw.c
+++ b/drivers/scsi/sym53c8xx_2/sym_fw.c
@@ -206,13 +206,13 @@ sym_fw2_patch(struct sym_hcb *np)
         *  they are not desirable. See `sym_fw2.h' for more details.
         */
        if (!(np->device_id == PCI_DEVICE_ID_LSI_53C1010_66 &&
-             np->revision_id < 0x1 &&
+             np->s.device->revision < 0x1 &&
              np->pciclk_khz < 60000)) {
                scripta0->datao_phase[0] = cpu_to_scr(SCR_NO_OP);
                scripta0->datao_phase[1] = cpu_to_scr(0);
        }
-       if (!(np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 &&
-             /* np->revision_id < 0xff */ 1)) {
+       if (!(np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 /* &&
+             np->s.device->revision < 0xff */)) {
                scripta0->sel_done[0] = cpu_to_scr(SCR_NO_OP);
                scripta0->sel_done[1] = cpu_to_scr(0);
        }

diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 67a577db5d183cfbe4eea0b62dbdd85fe5c24d1c..3ed3ed86d35019e02282f0eec992fcb04b325601 100644 (file)
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -1254,8 +1254,8 @@ static int sym_host_info(struct sym_hcb *np, char *ptr, off_t offset, int len)
        info.pos        = 0;
 
        copy_info(&info, "Chip " NAME53C "%s, device id 0x%x, "
-                        "revision id 0x%x\n",
-                        np->s.chip_name, np->device_id, np->revision_id);
+                        "revision id 0x%x\n", np->s.chip_name,
+                        np->device_id, np->s.device->revision);
        copy_info(&info, "At PCI address %s, IRQ " IRQ_FMT "\n",
                pci_name(np->s.device), IRQ_PRM(np->s.device->irq));
        copy_info(&info, "Min. period factor %d, %s SCSI BUS%s\n",
@@ -1368,10 +1368,9 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt,
        unsigned long flags;
        struct sym_fw *fw;
 
-       printk(KERN_INFO
-               "sym%d: <%s> rev 0x%x at pci %s irq " IRQ_FMT "\n",
-               unit, dev->chip.name, dev->chip.revision_id,
-               pci_name(pdev), IRQ_PRM(pdev->irq));
+       printk(KERN_INFO "sym%d: <%s> rev 0x%x at pci %s irq " IRQ_FMT "\n",
+               unit, dev->chip.name, pdev->revision, pci_name(pdev),
+               IRQ_PRM(pdev->irq));
 
        /*
         *  Get the firmware for this chip.
@@ -1412,7 +1411,6 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt,
        np->s.device    = pdev;
        np->s.unit      = unit;
        np->device_id   = dev->chip.device_id;
-       np->revision_id = dev->chip.revision_id;
        np->features    = dev->chip.features;
        np->clock_divn  = dev->chip.nr_divisor;
        np->maxoffs     = dev->chip.offset_max;
@@ -1500,7 +1498,7 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt,
        instance->transportt    = sym2_transport_template;
 
        /* 53c896 rev 1 errata: DMA may not cross 16MB boundary */
-       if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && np->revision_id < 2)
+       if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && pdev->revision < 2)
                instance->dma_boundary = 0xFFFFFF;
 
        spin_unlock_irqrestore(instance->host_lock, flags);
@@ -1545,7 +1543,6 @@ static int __devinit sym_check_supported(struct sym_device *device)
 {
        struct sym_chip *chip;
        struct pci_dev *pdev = device->pdev;
-       u_char revision;
        unsigned long io_port = pci_resource_start(pdev, 0);
        int i;
 
@@ -1565,14 +1562,12 @@ static int __devinit sym_check_supported(struct sym_device *device)
         * to our device structure so we can make it match the actual device
         * and options.
         */
-       pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
-       chip = sym_lookup_chip_table(pdev->device, revision);
+       chip = sym_lookup_chip_table(pdev->device, pdev->revision);
        if (!chip) {
                dev_info(&pdev->dev, "device not supported\n");
                return -ENODEV;
        }
        memcpy(&device->chip, chip, sizeof(device->chip));
-       device->chip.revision_id = revision;
 
        return 0;
 }
@@ -1613,7 +1608,7 @@ static int __devinit sym_set_workarounds(struct sym_device *device)
         *  We must ensure the chip will use WRITE AND INVALIDATE.
         *  The revision number limit is for now arbitrary.
         */
-       if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && chip->revision_id < 0x4) {
+       if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && pdev->revision < 0x4) {
                chip->features  |= (FE_WRIE | FE_CLSE);
        }
 
@@ -1905,12 +1900,10 @@ static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev)
  */
 static void sym2_reset_workarounds(struct pci_dev *pdev)
 {
-       u_char revision;
        u_short status_reg;
        struct sym_chip *chip;
 
-       pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
-       chip = sym_lookup_chip_table(pdev->device, revision);
+       chip = sym_lookup_chip_table(pdev->device, pdev->revision);
 
        /* Work around for errant bit in 895A, in a fashion
         * similar to what is done in sym_set_workarounds().

diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index af24c447b19569bc8fc57afb9a6b438e93b23f72..9f4198ce845eac70ed217177552f310ae9120bc0 100644 (file)
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -805,7 +805,7 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru
         *  are used. Disable internal cycles.
         */
        if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 &&
-           np->revision_id < 0x1)
+           np->s.device->revision < 0x1)
                np->rv_ccntl0   |=  DILS;
 
        /*
@@ -829,9 +829,9 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru
         *  LOAD/STORE instructions does not need this work-around.
         */
        if ((np->device_id == PCI_DEVICE_ID_NCR_53C810 &&
-            np->revision_id >= 0x10 && np->revision_id <= 0x11) ||
+            np->s.device->revision >= 0x10 && np->s.device->revision <= 0x11) ||
            (np->device_id == PCI_DEVICE_ID_NCR_53C860 &&
-            np->revision_id <= 0x1))
+            np->s.device->revision <= 0x1))
                np->features &= ~(FE_WRIE|FE_ERL|FE_ERMP);
 
        /*
@@ -1809,7 +1809,7 @@ void sym_start_up (struct sym_hcb *np, int reason)
         *  I just don't want. :)
         */
        if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 &&
-           np->revision_id < 1)
+           np->s.device->revision < 1)
                OUTB(np, nc_stest1, INB(np, nc_stest1) | 0x30);
 
        /*

diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h
index 79ab6a177039956cf6da70a12c160982c0f61620..3aa8060a4d2a3c826215bc20b23aa3dd602d424c 100644 (file)
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.h
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h
@@ -919,7 +919,6 @@ struct sym_hcb {
         *  General controller parameters and configuration.
         */
        u_short device_id;      /* PCI device id                */
-       u_char  revision_id;    /* PCI device revision id       */
        u_int   features;       /* Chip features map            */
        u_char  myaddr;         /* SCSI id of the adapter       */
        u_char  maxburst;       /* log base 2 of dwords burst   */