]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
USB: build fixes: ohci-omap
authorDavid Brownell <david-b@pacbell.net>
Mon, 31 Jul 2006 14:29:39 +0000 (07:29 -0700)
committerGreg Kroah-Hartman <gregkh@suse.de>
Wed, 27 Sep 2006 18:58:52 +0000 (11:58 -0700)
The ohci-omap code has diverged from the working version in the linux-omap
tree; this syncs up the versions:

  - Another clock is needed in various cases
  - The omap-1510 iommu code needs to be #ifdeffed out on newer parts
  - Saner use of the HCD framework
  - Various other changes, e.g. a Nokia 770 quirk

And some minor dead-whitespace removal.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/host/ohci-omap.c

index 47f1c9bbef878852e785284826bfacc71f715ccf..160cd4c58a03a45ab5afe579f67a48f41edf6f47 100644 (file)
@@ -4,7 +4,7 @@
  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
  * (C) Copyright 2000-2005 David Brownell
  * (C) Copyright 2002 Hewlett-Packard Company
- * 
+ *
  * OMAP Bus Glue
  *
  * Modified for OMAP by Tony Lindgren <tony@atomide.com>
@@ -66,15 +66,20 @@ extern int usb_disabled(void);
 extern int ocpi_enable(void);
 
 static struct clk *usb_host_ck;
+static struct clk *usb_dc_ck;
+static int host_enabled;
+static int host_initialized;
 
 static void omap_ohci_clock_power(int on)
 {
        if (on) {
+               clk_enable(usb_dc_ck);
                clk_enable(usb_host_ck);
                /* guesstimate for T5 == 1x 32K clock + APLL lock time */
                udelay(100);
        } else {
                clk_disable(usb_host_ck);
+               clk_disable(usb_dc_ck);
        }
 }
 
@@ -87,14 +92,14 @@ static int omap_ohci_transceiver_power(int on)
        if (on) {
                if (machine_is_omap_innovator() && cpu_is_omap1510())
                        fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
-                               | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), 
+                               | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
                               INNOVATOR_FPGA_CAM_USB_CONTROL);
                else if (machine_is_omap_osk())
                        tps65010_set_gpio_out_value(GPIO1, LOW);
        } else {
                if (machine_is_omap_innovator() && cpu_is_omap1510())
                        fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
-                               & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), 
+                               & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
                               INNOVATOR_FPGA_CAM_USB_CONTROL);
                else if (machine_is_omap_osk())
                        tps65010_set_gpio_out_value(GPIO1, HIGH);
@@ -103,6 +108,7 @@ static int omap_ohci_transceiver_power(int on)
        return 0;
 }
 
+#ifdef CONFIG_ARCH_OMAP15XX
 /*
  * OMAP-1510 specific Local Bus clock on/off
  */
@@ -121,8 +127,8 @@ static int omap_1510_local_bus_power(int on)
 /*
  * OMAP-1510 specific Local Bus initialization
  * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE.
- *       See also arch/mach-omap/memory.h for __virt_to_dma() and 
- *       __dma_to_virt() which need to match with the physical 
+ *       See also arch/mach-omap/memory.h for __virt_to_dma() and
+ *       __dma_to_virt() which need to match with the physical
  *       Local Bus address below.
  */
 static int omap_1510_local_bus_init(void)
@@ -130,7 +136,7 @@ static int omap_1510_local_bus_init(void)
        unsigned int tlb;
        unsigned long lbaddr, physaddr;
 
-       omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4, 
+       omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4,
               OMAP1510_LB_CLOCK_DIV);
 
        /* Configure the Local Bus MMU table */
@@ -138,7 +144,7 @@ static int omap_1510_local_bus_init(void)
                lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET;
                physaddr = tlb * 0x00100000 + PHYS_OFFSET;
                omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H);
-               omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc, 
+               omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc,
                       OMAP1510_LB_MMU_CAM_L);
                omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H);
                omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L);
@@ -152,6 +158,10 @@ static int omap_1510_local_bus_init(void)
 
        return 0;
 }
+#else
+#define omap_1510_local_bus_power(x)   {}
+#define omap_1510_local_bus_init()     {}
+#endif
 
 #ifdef CONFIG_USB_OTG
 
@@ -173,13 +183,14 @@ static void start_hnp(struct ohci_hcd *ohci)
 
 /*-------------------------------------------------------------------------*/
 
-static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev)
+static int ohci_omap_init(struct usb_hcd *hcd)
 {
-       struct omap_usb_config  *config = pdev->dev.platform_data;
+       struct ohci_hcd         *ohci = hcd_to_ohci(hcd);
+       struct omap_usb_config  *config = hcd->self.controller->platform_data;
        int                     need_transceiver = (config->otg != 0);
        int                     ret;
 
-       dev_dbg(&pdev->dev, "starting USB Controller\n");
+       dev_dbg(hcd->self.controller, "starting USB Controller\n");
 
        if (config->otg) {
                ohci_to_hcd(ohci)->self.otg_port = config->otg;
@@ -200,7 +211,7 @@ static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev)
                if (ohci->transceiver) {
                        int     status = otg_set_host(ohci->transceiver,
                                                &ohci_to_hcd(ohci)->self);
-                       dev_dbg(&pdev->dev, "init %s transceiver, status %d\n",
+                       dev_dbg(hcd->self.controller, "init %s transceiver, status %d\n",
                                        ohci->transceiver->label, status);
                        if (status) {
                                if (ohci->transceiver)
@@ -208,7 +219,7 @@ static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev)
                                return status;
                        }
                } else {
-                       dev_err(&pdev->dev, "can't find transceiver\n");
+                       dev_err(hcd->self.controller, "can't find transceiver\n");
                        return -ENODEV;
                }
        }
@@ -247,6 +258,10 @@ static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev)
                }
                ohci_writel(ohci, rh, &ohci->regs->roothub.a);
                distrust_firmware = 0;
+       } else if (machine_is_nokia770()) {
+               /* We require a self-powered hub, which should have
+                * plenty of power. */
+               ohci_to_hcd(ohci)->power_budget = 0;
        }
 
        /* FIXME khubd hub requests should manage power switching */
@@ -260,21 +275,15 @@ static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev)
        return 0;
 }
 
-static void omap_stop_hc(struct platform_device *pdev)
+static void ohci_omap_stop(struct usb_hcd *hcd)
 {
-       dev_dbg(&pdev->dev, "stopping USB Controller\n");
+       dev_dbg(hcd->self.controller, "stopping USB Controller\n");
        omap_ohci_clock_power(0);
 }
 
 
 /*-------------------------------------------------------------------------*/
 
-void usb_hcd_omap_remove (struct usb_hcd *, struct platform_device *);
-
-/* configure so an HC device and id are always provided */
-/* always called with process context; sleeping is OK */
-
-
 /**
  * usb_hcd_omap_probe - initialize OMAP-based HCDs
  * Context: !in_interrupt()
@@ -283,7 +292,7 @@ void usb_hcd_omap_remove (struct usb_hcd *, struct platform_device *);
  * then invokes the start() method for the HCD associated with it
  * through the hotplug entry's driver_data.
  */
-int usb_hcd_omap_probe (const struct hc_driver *driver,
+static int usb_hcd_omap_probe (const struct hc_driver *driver,
                          struct platform_device *pdev)
 {
        int retval, irq;
@@ -291,12 +300,12 @@ int usb_hcd_omap_probe (const struct hc_driver *driver,
        struct ohci_hcd *ohci;
 
        if (pdev->num_resources != 2) {
-               printk(KERN_ERR "hcd probe: invalid num_resources: %i\n", 
+               printk(KERN_ERR "hcd probe: invalid num_resources: %i\n",
                       pdev->num_resources);
                return -ENODEV;
        }
 
-       if (pdev->resource[0].flags != IORESOURCE_MEM 
+       if (pdev->resource[0].flags != IORESOURCE_MEM
                        || pdev->resource[1].flags != IORESOURCE_IRQ) {
                printk(KERN_ERR "hcd probe: invalid resource type\n");
                return -ENODEV;
@@ -306,6 +315,17 @@ int usb_hcd_omap_probe (const struct hc_driver *driver,
        if (IS_ERR(usb_host_ck))
                return PTR_ERR(usb_host_ck);
 
+       if (!cpu_is_omap1510())
+               usb_dc_ck = clk_get(0, "usb_dc_ck");
+       else
+               usb_dc_ck = clk_get(0, "lb_ck");
+
+       if (IS_ERR(usb_dc_ck)) {
+               clk_put(usb_host_ck);
+               return PTR_ERR(usb_dc_ck);
+       }
+
+
        hcd = usb_create_hcd (driver, &pdev->dev, pdev->dev.bus_id);
        if (!hcd) {
                retval = -ENOMEM;
@@ -325,9 +345,8 @@ int usb_hcd_omap_probe (const struct hc_driver *driver,
        ohci = hcd_to_ohci(hcd);
        ohci_hcd_init(ohci);
 
-       retval = omap_start_hc(ohci, pdev);
-       if (retval < 0)
-               goto err2;
+       host_initialized = 0;
+       host_enabled = 1;
 
        irq = platform_get_irq(pdev, 0);
        if (irq < 0) {
@@ -335,15 +354,21 @@ int usb_hcd_omap_probe (const struct hc_driver *driver,
                goto err2;
        }
        retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
-       if (retval == 0)
-               return retval;
+       if (retval)
+               goto err2;
+
+       host_initialized = 1;
+
+       if (!host_enabled)
+               omap_ohci_clock_power(0);
 
-       omap_stop_hc(pdev);
+       return 0;
 err2:
        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 err1:
        usb_put_hcd(hcd);
 err0:
+       clk_put(usb_dc_ck);
        clk_put(usb_host_ck);
        return retval;
 }
@@ -359,28 +384,36 @@ err0:
  * Reverses the effect of usb_hcd_omap_probe(), first invoking
  * the HCD's stop() method.  It is always called from a thread
  * context, normally "rmmod", "apmd", or something similar.
- *
  */
-void usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev)
+static inline void
+usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev)
 {
+       struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
+
        usb_remove_hcd(hcd);
+       if (ohci->transceiver) {
+               (void) otg_set_host(ohci->transceiver, 0);
+               put_device(ohci->transceiver->dev);
+       }
        if (machine_is_omap_osk())
                omap_free_gpio(9);
-       omap_stop_hc(pdev);
        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
        usb_put_hcd(hcd);
+       clk_put(usb_dc_ck);
        clk_put(usb_host_ck);
 }
 
 /*-------------------------------------------------------------------------*/
 
-static int __devinit
+static int
 ohci_omap_start (struct usb_hcd *hcd)
 {
        struct omap_usb_config *config;
        struct ohci_hcd *ohci = hcd_to_ohci (hcd);
        int             ret;
 
+       if (!host_enabled)
+               return 0;
        config = hcd->self.controller->platform_data;
        if (config->otg || config->rwc) {
                ohci->hc_control = OHCI_CTRL_RWC;
@@ -411,8 +444,9 @@ static const struct hc_driver ohci_omap_hc_driver = {
        /*
         * basic lifecycle operations
         */
+       .reset =                ohci_omap_init,
        .start =                ohci_omap_start,
-       .stop =                 ohci_stop,
+       .stop =                 ohci_omap_stop,
 
        /*
         * managing i/o requests and associated device resources
@@ -449,13 +483,8 @@ static int ohci_hcd_omap_drv_probe(struct platform_device *dev)
 static int ohci_hcd_omap_drv_remove(struct platform_device *dev)
 {
        struct usb_hcd          *hcd = platform_get_drvdata(dev);
-       struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 
        usb_hcd_omap_remove(hcd, dev);
-       if (ohci->transceiver) {
-               (void) otg_set_host(ohci->transceiver, 0);
-               put_device(ohci->transceiver->dev);
-       }
        platform_set_drvdata(dev, NULL);
 
        return 0;
@@ -475,7 +504,7 @@ static int ohci_omap_suspend(struct platform_device *dev, pm_message_t message)
 
        omap_ohci_clock_power(0);
        ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
-       dev->power.power_state = PMSG_SUSPEND;
+       dev->dev.power.power_state = PMSG_SUSPEND;
        return 0;
 }
 
@@ -488,8 +517,8 @@ static int ohci_omap_resume(struct platform_device *dev)
        ohci->next_statechange = jiffies;
 
        omap_ohci_clock_power(1);
-       dev->power.power_state = PMSG_ON;
-       usb_hcd_resume_root_hub(dev_get_drvdata(dev));
+       dev->dev.power.power_state = PMSG_ON;
+       usb_hcd_resume_root_hub(platform_get_drvdata(dev));
        return 0;
 }