+++ /dev/null
-#@TYPE: Distribution
-#@NAME: AsusOE Linux
-#@DESCRIPTION: Distribution configuration for the WL500g Linux
-
-DISTRO_NAME = "AsusOE"
-DISTRO_VERSION = "0.1-alpha"
-
-TARGET_OS = "linux-uclibc"
-TARGET_SYS = "${TARGET_ARCH}-uclibc"
-
-CROSS_DIR = "/opt/brcm/hndtools-mipsel-uclibc"
-
-INHIBIT_DEFAULT_DEPS = "1"
-
-USE_NLS ?= "no"
-
-INHERIT += "package_ipk debian"
-
-export prefix = "/opt"
-export sysconfdir = "/opt/etc"
-export localstatedir = "/opt/var"
+++ /dev/null
-#@TYPE: Distribution
-#@NAME: coLinuxoe
-#@DESCRIPTION: Generic OE built distro for the coLinux MACHINE
-
-INHERIT += "package_ipk debian"
-
-# MACHINE decides that linux-colinux is the correct kernel.
-# DISTRO decides whether to build 2.4 or 2.6. Latest coLinux version
-# (0.6.2) uses 2.6 by default, so we'll be following them.
-# PREFERRED_VERSION_linux-colinux = "2.4.28"
-PREFERRED_VERSION_linux-colinux ?= "2.6.10"
-
-IMAGE_FSTYPES =+ "ext2 ext2.gz"
+++ /dev/null
-# general configuration file for freezing a distribution
-#
-# If freeze.conf is included (include conf/distro/freeze.conf) in the
-# distro conf file it will define BBFILES from the information in
-# ${DISTRO}-bbfiles.conf or ${DISTRO}-packages.conf (whichever
-# exists in that order of preference.)
-#
-# NOTE that these conf files use ${PKGDIR} and therefore that
-# variable must be defined before this file is included, or the
-# definition below (${TOPDIR}/openmebedded) must be correct.
-#
-PKGDIR ?= "${TOPDIR}/openembedded"
-FROZEN_DIR ?= "/non/-existent/-directory/-for/-security"
-
-# Pull in the frozen definitions (if they exist) The multiple
-# includes allow the frozen file to be stored alongside local.conf
-# and in the conf/distro directory - the former take precedence over
-# the latter.
-include conf/distro/${DISTRO}-packages.conf
-include conf/${DISTRO}-packages.conf
-include ${FROZEN_DIR}/${DISTRO}-packages.conf
-
-include conf/distro/${DISTRO}-bbfiles.conf
-include conf/${DISTRO}-bbfiles.conf
-include ${FROZEN_DIR}/${DISTRO}-bbfiles.conf
+++ /dev/null
-#@TYPE : Distribution <SHREK>
-#@NAME : Jornada Linux Mobility Edition (JLime) <www.jlime.com>
-#@DESCRIPTION : Linux for HP jornada 5xx,6xx,7xx,8xx series
-#Created and Maintained by Kristoffer Ericson <Kristoffer@jlime.com>
-
-DISTRO = "Jornada Linux Mobility Edition"
-DISTRO_NAME = "JLime"
-DISTRO_VERSION = "Shrek"
-DISTRO_TYPE = "release"
-
-export FEED_URLS_jlime = "shrek##http://www.jlime.com/downloads/releases/shrek/${TARGET_ARCH}/feed/"
-
-CVSDATE = 20050518
-
-PREFERRED_PROVIDERS = "virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}libc-for-gcc:glibc"
-PREFERRED_PROVIDER_virtual/kernel = "jlime-kernel-${TARGET_ARCH}"
-PREFERRED_PROVIDER_xserver = "xserver-kdrive"
-
-PREFERRED_VERSION_binutils = "2.15.94.0.1"
-PREFERRED_VERSION_binutils-cross = "2.15.94.0.1"
-PREFERRED_VERSION_binutils-cross-sdk = "2.15.94.0.1"
-PREFERRED_VERSION_gcc = "3.4.3"
-PREFERRED_VERSION_gcc-cross = "3.4.3"
-PREFERRED_VERSION_gcc-cross-initial = "3.4.3"
-PREFERRED_VERSION_linuc-libc-headers = "2.6.7.0"
-PREFERRED_VERSION_glib-2.0-native = "2.6.2"
-PREFERRED_VERSION_glib-2.0 = "2.6.2"
-PREFERRED_VERSION_dpkg = "1.10.23"
-PREFERRED_VERSION_qte = "2.3.10"
-PREFERRED_VERSION_xserver-kdrive = "20050207"
-
-INHERIT += "package_tar package_ipk"
-BBINCLUDELOGS = "yes"
-MODUTILS = "26"
-IMAGE_FSTYPES = "tar.bz2"
-
-BOOTSTRAP_EXTRA_DEPENDS += "pcmcia-cs ncurses nano virtual/kernel wireless-tools console-tools"
-BOOTSTRAP_EXTRA_RDEPENDS += "pcmcia-cs ncurses nano wireless-tools \
-kernel-module-3c574-cs kernel-module-3c589-cs kernel-module-8390 \
-kernel-module-airo-cs kernel-module-airo console-tools \
-kernel-module-arlan \
-kernel-module-atmel-cs kernel-module-atmel kernel-module-axnet-cs \
-kernel-module-hermes \
-kernel-module-wavelan kernel-module-wavelan-cs \
-kernel-module-xirc2ps-cs kernel-module-orinoco-cs kernel-module-orinoco \
-kernel-module-nmclan-cs kernel-module-pcnet-cs e2tools e2fsprogs"
+++ /dev/null
-include conf/distro/familiar.conf
-
-DISTRO = "maemo"
-DISTRO_NAME = "Maemo Linux"
-DISTRO_VERSION = "v1.0b-${DATE}"
-
-DISTRO_TYPE = "debug"
-#DISTRO_TYPE = "release"
-
-FEED_URIS += " \
- base##http://familiar.handhelds.org/releases/${DISTRO_VERSION}/feed/base \
- updates##http://familiar.handhelds.org/releases/${DISTRO_VERSION}/feed/updates"
-
-#CVSDATE = 20050331
-
-PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial"
-PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}gcc:gcc-cross"
-PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}g++:gcc-cross"
-
-#PREFERRED_VERSION_binutils-cross = "2.15.91.0.2"
-#PREFERRED_VERSION_gcc-cross = "3.4.4"
-#PREFERRED_VERSION_gcc-cross-initial = "3.4.4
-#PREFERRED_VERSION_libtool-native = "1.5.6"
-#PREFERRED_VERSION_libtool-cross= "1.5.6"
-
-#
-# GPE
-#
-
-PREFERRED_PROVIDERS += "virtual/xserver:xserver-kdrive"
-PREFERRED_PROVIDERS += "virtual/gconf:gconf-dbus"
-PREFERRED_PROVIDER_x11 = "diet-x11"
-
-include conf/distro/preferred-gpe-versions.inc
-
-#
-# Maemo
-#
-
-include conf/distro/maemo-preferred.inc
+++ /dev/null
-#@TYPE: Distribution
-#@NAME: Nylon Linux
-#@DESCRIPTION: Distribution configuration for Nylon Mesh Linux distribution
-
-# this distribution is mainly for wireless networking devices and includes
-# packages necessary for wireless LAN access point, routing, encryption and
-# especially mesh routing applications
-#
-# it is primarily aimed at the 4G Systems MeshCube (mtx-1) and other
-# mipsel based platforms
-#
-# Bruno Randolf <bruno.randolf@4g-systems.biz>
-
-INHERIT += "package_ipk debian"
-INHERIT += "linux_modules"
-
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}libc-for-gcc:glibc"
-
-#CVSDATE = 20040916
-
-PREFERRED_VERSION_glibc = "2.3.3"
-PREFERRED_VERSION_gcc-cross-initial = "3.3.4"
-PREFERRED_VERSION_gcc-cross = "3.3.4"
-PREFERRED_VERSION_gcc-cross-sdk = "3.3.4"
-PREFERRED_VERSION_gcc = "3.3.4"
-PREFERRED_VERSION_binutils-cross = "2.14.90.0.7"
-PREFERRED_VERSION_binutils-cross-sdk = "2.14.90.0.7"
-PREFERRED_VERSION_binutils = "2.14.90.0.7"
-
-PREFERRED_VERSION_olsrd = "0.4.8"
-PREFERRED_VERSION_prism54-firmware = "1.0.3.0"
-PREFERRED_VERSION_usbutils = "0.11"
-
-# usually overrrided from local.conf
-NYLON_RELEASE = "unstable"
-
-# use meshcub.org mirrors
-CVS_TARBALL_STASH = "http://meshcube.org/nylon/${NYLON_RELEASE}/sources/"
-INHERIT += "nylon-mirrors"
-
-export FEED_URIS="nylon##http://meshcube.org/nylon/${NYLON_RELEASE}/feed"
-
-IMAGE_NAME = "${IMAGE_BASENAME}-${MACHINE}_${BUILDNAME}"
-KERNEL_IMAGE_NAME = "kernel-${KV}-${MACHINE}_${BUILDNAME}"
+++ /dev/null
-#@TYPE: Distribution
-#@NAME: OpenMN
-#@DESCRIPTION: Destribution for Devices produced by M&N Solutions GmbH, Germany, Rosbach
-
-# Used in base-files for /etc/issue and /etc/issue.net
-DISTRO_NAME = "OpenMN"
-DISTRO_VERSION = "5.4"
-
-TARGET_ARCH = "arm"
-TARGET_FPU = "soft"
-TARGET_OS = "linux"
-
-INHERIT += "package_ipk"
-INHERIT += "debian"
-IPKG_ARCHS = "armv5te openmn"
-
-FEED_URIS = "mnci54##http://www.mn-solutions.de/feed/mnci54/base"
-
-IMAGE_FSTYPE = "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad=0x1ec0000 --eraseblock=0x40000"
-IMAGE_CMD_jffs2 = "mkfs.jffs2 --root=${IMAGE_ROOTFS} --faketime --output=${DEPLOY_DIR_IMAGE}/rootfs.${MACHINE} ${EXTRA_IMAGECMD}"
+++ /dev/null
-#@TYPE: Distribution
-#@NAME: OpenOMAP
-#@DESCRIPTION: OE Distribution for TI OMAP Development Boards
-
-INHERIT += " package_ipk debian"
-TARGET_OS = "linux"
-TARGET_FPU ?= "soft"
-
-# 2.4 vs 2.6 is a distro decision.
-MODUTILS = "26"
-BOOTSTRAP_EXTRA_DEPENDS += "udev"
-BOOTSTRAP_EXTRA_RDEPENDS += "udev"
+++ /dev/null
-DISTRO = "opensimpad"
-DISTRO_NAME = "OpenSIMpad"
-DISTRO_VERSION = "0.9.0-rc2-${DATE}"
-
-include conf/distro/openzaurus-3.5.4.conf
-
+++ /dev/null
-#@TYPE: Distribution
-#@NAME: OpenSIMpad
-#@DESCRIPTION: Distribution configuration for OpenSIMpad (http://www.opensimpad.org)
-
-INHERIT += " package_ipk debian"
-TARGET_OS ?= "linux"
-TARGET_FPU ?= "soft"
-
-PARALLEL_INSTALL_MODULES = "1"
-
-DISTRO_CHECK := "${@bb.data.getVar("DISTRO_VERSION",d,1) or bb.fatal('Remove this line or set a dummy DISTRO_VERSION if you really want to build an unversioned distro')}"
+++ /dev/null
-# automatically generated by bitbake freeze
-BBFILES := "\
-${PKGDIR}/packages/apache/*.bb \
-${PKGDIR}/packages/openssl/*.bb \
-${PKGDIR}/packages/ipkg-utils/*.bb \
-${PKGDIR}/packages/meta/package-index.bb \
-${PKGDIR}/packages/meta/openslug-native-packages.bb \
-${PKGDIR}/packages/freeze/*.bb \
-${PKGDIR}/packages/pcre/*.bb \
-${PKGDIR}/packages/expat/*.bb \
-${OPENSLUG_EXTRA_BBFILES}"
+++ /dev/null
-include conf/distro/openslug.conf
-
-# Corresponting packages should be in openslug-native.bb,
-# currently missing: ipkg-utils libtool quilt pkgconfig
-ASSUME_PROVIDED = "libtool-cross \
- libtool-native \
- automake-native \
- autoconf-native \
- quilt-native \
- ipkg-native \
- gnu-config-native \
- pkgconfig-native \
- virtual/armeb-linux-gcc \
- virtual/libc \
- update-rc.d \
- "
-
-# Our build host is armeb, not armv5eb that the kernel reports
-BUILD_ARCH = armeb
-
+++ /dev/null
-BBFILES := "\
-${PKGDIR}/packages/alsa/*.bb \
-${PKGDIR}/packages/atftp/*.bb \
-${PKGDIR}/packages/audiofile/*.bb \
-${PKGDIR}/packages/aumix/*.bb \
-${PKGDIR}/packages/autoconf/*.bb \
-${PKGDIR}/packages/automake/*.bb \
-${PKGDIR}/packages/base-files/*.bb \
-${PKGDIR}/packages/base-passwd/*.bb \
-${PKGDIR}/packages/bash/*.bb \
-${PKGDIR}/packages/bind/*.bb \
-${PKGDIR}/packages/binutils/*.bb \
-${PKGDIR}/packages/bison/*.bb \
-${PKGDIR}/packages/bluez/*.bb \
-${PKGDIR}/packages/boost/*.bb \
-${PKGDIR}/packages/bridge-utils/*.bb \
-${PKGDIR}/packages/busybox/*.bb \
-${PKGDIR}/packages/bwmon/*.bb \
-${PKGDIR}/packages/bzip2/*.bb \
-${PKGDIR}/packages/ccxstream/*.bb \
-${PKGDIR}/packages/coreutils/*.bb \
-${PKGDIR}/packages/cpio/*.bb \
-${PKGDIR}/packages/cron/*.bb \
-${PKGDIR}/packages/ctorrent/*.bb \
-${PKGDIR}/packages/ctrlproxy/*.bb \
-${PKGDIR}/packages/cvs/*.bb \
-${PKGDIR}/packages/cyrus-imapd/*.bb \
-${PKGDIR}/packages/cyrus-sasl/*.bb \
-${PKGDIR}/packages/db/*.bb \
-${PKGDIR}/packages/devio/*.bb \
-${PKGDIR}/packages/diffstat/*.bb \
-${PKGDIR}/packages/diffutils/*.bb \
-${PKGDIR}/packages/dnsmasq/*.bb \
-${PKGDIR}/packages/dropbear/*.bb \
-${PKGDIR}/packages/e2fsprogs/*.bb \
-${PKGDIR}/packages/expat/*.bb \
-${PKGDIR}/packages/fakeroot/*.bb \
-${PKGDIR}/packages/file/*.bb \
-${PKGDIR}/packages/findutils/*.bb \
-${PKGDIR}/packages/flac/*.bb \
-${PKGDIR}/packages/flex/*.bb \
-${PKGDIR}/packages/freeze/*.bb \
-${PKGDIR}/packages/ftpd-topfield/*.bb \
-${PKGDIR}/packages/gawk/*.bb \
-${PKGDIR}/packages/gcc/*.bb \
-${PKGDIR}/packages/gdb/*.bb \
-${PKGDIR}/packages/gdbm/*.bb \
-${PKGDIR}/packages/gettext/*.bb \
-${PKGDIR}/packages/glib-1.2/*.bb \
-${PKGDIR}/packages/glib-2.0/*.bb \
-${PKGDIR}/packages/glibc/*.bb \
-${PKGDIR}/packages/gnu-config/*.bb \
-${PKGDIR}/packages/gphoto2/*.bb \
-${PKGDIR}/packages/grep/*.bb \
-${PKGDIR}/packages/gtk-doc/*.bb \
-${PKGDIR}/packages/gzip/*.bb \
-${PKGDIR}/packages/hotplug-ng/*.bb \
-${PKGDIR}/packages/ifupdown/*.bb \
-${PKGDIR}/packages/initscripts/*.bb \
-${PKGDIR}/packages/install/*.bb \
-${PKGDIR}/packages/intltool/*.bb \
-${PKGDIR}/packages/iperf/*.bb \
-${PKGDIR}/packages/ipkg-utils/*.bb \
-${PKGDIR}/packages/ipkg/*.bb \
-${PKGDIR}/packages/iptables/*.bb \
-${PKGDIR}/packages/ircp/*.bb \
-${PKGDIR}/packages/irssi/*.bb \
-${PKGDIR}/packages/ixp425-eth/*.bb \
-${PKGDIR}/packages/ixp4xx/*.bb \
-${PKGDIR}/packages/joe/*.bb \
-${PKGDIR}/packages/jpeg/*.bb \
-${PKGDIR}/packages/lcdproc/*.bb \
-${PKGDIR}/packages/less/*.bb \
-${PKGDIR}/packages/libaal/*.bb \
-${PKGDIR}/packages/libao/*.bb \
-${PKGDIR}/packages/libdvb/*.bb \
-${PKGDIR}/packages/libexif/*.bb \
-${PKGDIR}/packages/libgphoto2/*.bb \
-${PKGDIR}/packages/libgsm/*.bb \
-${PKGDIR}/packages/libid3tag/*.bb \
-${PKGDIR}/packages/liblockfile/*.bb \
-${PKGDIR}/packages/libmad/*.bb \
-${PKGDIR}/packages/libmikmod/*.bb \
-${PKGDIR}/packages/libogg/*.bb \
-${PKGDIR}/packages/libol/*.bb \
-${PKGDIR}/packages/libpcap/*.bb \
-${PKGDIR}/packages/libpng/*.bb \
-${PKGDIR}/packages/libtiff/*.bb \
-${PKGDIR}/packages/libtool/*.bb \
-${PKGDIR}/packages/libusb/*.bb \
-${PKGDIR}/packages/libvorbis/*.bb \
-${PKGDIR}/packages/libxml/*.bb \
-${PKGDIR}/packages/linux-libc-headers/*.bb \
-${PKGDIR}/packages/linux/*.bb \
-${PKGDIR}/packages/lrzsz/*.bb \
-${PKGDIR}/packages/lsof/*.bb \
-${PKGDIR}/packages/lzo/*.bb \
-${PKGDIR}/packages/m4/*.bb \
-${PKGDIR}/packages/mailx/*.bb \
-${PKGDIR}/packages/make/*.bb \
-${PKGDIR}/packages/makedevs/*.bb \
-${PKGDIR}/packages/man-pages/*.bb \
-${PKGDIR}/packages/man/*.bb \
-${PKGDIR}/packages/meta/*.bb \
-${PKGDIR}/packages/mgetty/*.bb \
-${PKGDIR}/packages/miau/*.bb \
-${PKGDIR}/packages/microcom/*.bb \
-${PKGDIR}/packages/module-init-tools/*.bb \
-${PKGDIR}/packages/modutils/*.bb \
-${PKGDIR}/packages/monotone/*.bb \
-${PKGDIR}/packages/mt-daapd/*.bb \
-${PKGDIR}/packages/mtd/*.bb \
-${PKGDIR}/packages/musicpd/*.bb \
-${PKGDIR}/packages/mutt/*.bb \
-${PKGDIR}/packages/mysql/*.bb \
-${PKGDIR}/packages/nail/*.bb \
-${PKGDIR}/packages/nano/*.bb \
-${PKGDIR}/packages/ncftp/*.bb \
-${PKGDIR}/packages/ncurses/*.bb \
-${PKGDIR}/packages/netbase/*.bb \
-${PKGDIR}/packages/netpbm/*.bb \
-${PKGDIR}/packages/nfs-utils/*.bb \
-${PKGDIR}/packages/nis/*.bb \
-${PKGDIR}/packages/nslu2-binary-only/*.bb \
-${PKGDIR}/packages/ntp/*.bb \
-${PKGDIR}/packages/obexftp/*.bb \
-${PKGDIR}/packages/openldap/*.bb \
-${PKGDIR}/packages/openntpd/*.bb \
-${PKGDIR}/packages/openobex-apps/*.bb \
-${PKGDIR}/packages/openobex/*.bb \
-${PKGDIR}/packages/openslug-init/*.bb \
-${PKGDIR}/packages/openssh/*.bb \
-${PKGDIR}/packages/openssl/*.bb \
-${PKGDIR}/packages/openvpn/*.bb \
-${PKGDIR}/packages/pam/*.bb \
-${PKGDIR}/packages/patch/*.bb \
-${PKGDIR}/packages/patcher/*.bb \
-${PKGDIR}/packages/pciutils/*.bb \
-${PKGDIR}/packages/pcmcia-cs/*.bb \
-${PKGDIR}/packages/pcre/*.bb \
-${PKGDIR}/packages/perl/*.bb \
-${PKGDIR}/packages/php/*.bb \
-${PKGDIR}/packages/pkgconfig/*.bb \
-${PKGDIR}/packages/popt/*.bb \
-${PKGDIR}/packages/portmap/*.bb \
-${PKGDIR}/packages/postfix/*.bb \
-${PKGDIR}/packages/ppp/*.bb \
-${PKGDIR}/packages/procps/*.bb \
-${PKGDIR}/packages/psmisc/*.bb \
-${PKGDIR}/packages/puppy/*.bb \
-${PKGDIR}/packages/pvrusb2-mci/*.bb \
-${PKGDIR}/packages/pwc/*.bb \
-${PKGDIR}/packages/python/*.bb \
-${PKGDIR}/packages/qc-usb/*.bb \
-${PKGDIR}/packages/quilt/*.bb \
-${PKGDIR}/packages/readline/*.bb \
-${PKGDIR}/packages/reiser4progs/*.bb \
-${PKGDIR}/packages/reiserfsprogs/*.bb \
-${PKGDIR}/packages/rsync/*.bb \
-${PKGDIR}/packages/samba/*.bb \
-${PKGDIR}/packages/sane-backends/*.bb \
-${PKGDIR}/packages/screen/*.bb \
-${PKGDIR}/packages/sed/*.bb \
-${PKGDIR}/packages/setpwc/*.bb \
-${PKGDIR}/packages/slugimage/*.bb \
-${PKGDIR}/packages/ssmtp/*.bb \
-${PKGDIR}/packages/strace/*.bb \
-${PKGDIR}/packages/streamripper/*.bb \
-${PKGDIR}/packages/sudo/*.bb \
-${PKGDIR}/packages/sysfsutils/*.bb \
-${PKGDIR}/packages/syslog-ng/*.bb \
-${PKGDIR}/packages/sysvinit/*.bb \
-${PKGDIR}/packages/tar/*.bb \
-${PKGDIR}/packages/thttpd/*.bb \
-${PKGDIR}/packages/timezones/*.bb \
-${PKGDIR}/packages/tinylogin/*.bb \
-${PKGDIR}/packages/udev/*.bb \
-${PKGDIR}/packages/unionfs/*.bb \
-${PKGDIR}/packages/unzip/*.bb \
-${PKGDIR}/packages/update-modules/*.bb \
-${PKGDIR}/packages/update-rc.d/*.bb \
-${PKGDIR}/packages/upslug/*.bb \
-${PKGDIR}/packages/usbutils/*.bb \
-${PKGDIR}/packages/util-linux/*.bb \
-${PKGDIR}/packages/vim/*.bb \
-${PKGDIR}/packages/vlan/*.bb \
-${PKGDIR}/packages/vsftpd/*.bb \
-${PKGDIR}/packages/wakelan/*.bb \
-${PKGDIR}/packages/wget/*.bb \
-${PKGDIR}/packages/wireless-tools/*.bb \
-${PKGDIR}/packages/xinetd/*.bb \
-${PKGDIR}/packages/zd1211/*.bb \
-${PKGDIR}/packages/zlib/*.bb \
-${OPENSLUG_EXTRA_BBFILES}"
+++ /dev/null
-#@TYPE: Distribution
-#@NAME: OpenSlug
-#@DESCRIPTION: OpenSlug Linux Distribution for the NSLU2
-
-#----------------------------------------------------------------------------------
-# STANDARD OpenSlug DEFINITIONS
-#----------------------------------------------------------------------------------
-DISTRO_NAME = "OpenSlug"
-DISTRO_VERSION = "2.8-beta"
-DISTRO_TYPE ?= "beta"
-
-TARGET_FPU = "soft"
-TARGET_OS = "linux"
-
-USE_NLS ?= "no"
-USE_NLS_glib-2.0 = "yes"
-
-INHERIT += " package_ipk debian nslu2-jffs2-image"
-
-# NOTE: to build new packages set OPENSLUG_EXTRA_BBFILES to the full path name to
-# the .bb files for the packages to build - see openslug-packages.conf in this
-# directory
-OPENSLUG_EXTRA_BBFILES ?= ""
-
-# pull in the frozen list of bbfiles - this sets BBFILES and this will override any
-# setting in local.conf
-include conf/distro/freeze.conf
-
-#----------------------------------------------------------------------------------
-# FEEDS
-# The following lines define where on the internet OpenSlug looks for packages
-# when downloading new packages or updating existing packages. Additional feeds
-# (such as a local feed) can be defined in local.conf
-#----------------------------------------------------------------------------------
-# Add to the user's feeds from local.conf (there may be none)
-FEED_URIS_append_linux += "cross##http://ipkg.nslu2-linux.org/feeds/openslug/cross/${DISTRO_VERSION}"
-FEED_URIS_append_linux += "native##http://ipkg.nslu2-linux.org/feeds/openslug/native/${DISTRO_VERSION}"
-
-#
-# Uncomment the following to get the unstable feeds
-#FEED_URIS_append_linux += "unstable_cross##http://ipkg.nslu2-linux.org/feeds/openslug/cross/unstable"
-#FEED_URIS_append_linux += "unstable_native##http://ipkg.nslu2-linux.org/feeds/openslug/native/unstable"
-
-#----------------------------------------------------------------------------------
-# FIRMWARE CONFIGURATION
-#----------------------------------------------------------------------------------
-# IMAGE BUILD OPTIONS
-# -------------------
-IMAGE_FSTYPES = "jffs2"
-
-OPENSLUG_DEVICE_TABLE = "${@bb.which(bb.data.getVar('BBPATH', d, 1), 'files/device_table-openslug.txt')}"
-EXTRA_IMAGECMD_jffs2 = "--pad --big-endian --eraseblock=0x20000 -D ${OPENSLUG_DEVICE_TABLE}"
-
-# CMDLINE* macros define the kernel command line. CMDLINE_DEBUG is provided
-# to enable/disable debugging in the distro. Here noirqdebug is used to
-# remove the messages about unhandled interrupts - people debugging interrupt
-# issues in the kernel need to cancel this (set CMDLINE_DEBUG empty in local.conf)
-CMDLINE_DEBUG = "noirqdebug"
-
-# EXTRA PACKAGES
-# --------------
-# Filesystem support modules are listed in here for easy removal,
-# as is the lrzsz serial package and other kernel modules which are
-# not absolutely required for boot.
-# NOTE: only jffs2 support is an absolute requirement of boot, even
-# the ext2/ext3 support is optional!
-OPENSLUG_EXT2_PROGS = "e2fsprogs-mke2fs e2fsprogs-fsck e2fsprogs-e2fsck"
-OPENSLUG_REISER_PROGS = "reiserfsprogs"
-
-# The standard firmware contents and additional packages built as requirements
-# of the firmware are defined here in OPENSLUG_STANDARD_RDEPENDS and
-# OPENSLUG_STANDARD_DEPENDS respectively.
-OPENSLUG_STANDARD_DEPENDS = ""
-OPENSLUG_STANDARD_RDEPENDS = ""
-
-# Support for a variety of file systems is built in to the openslug
-# image, programs to format disks with these file systems may be
-# added or removed. By default ext2. ext3 and reiserfs supported
-# is included by the following lines.
-#
-# These lines add support for formatting ext2 and ext3 file systems
-# on a hard disk attached to the NSLU2. ext3 is the standard Linux
-# file system.
-OPENSLUG_STANDARD_DEPENDS += "e2fsprogs"
-OPENSLUG_STANDARD_RDEPENDS += "${OPENSLUG_EXT2_PROGS}"
-
-# These lines add support for formatting reiserfs file systems on
-# a hard disk.
-OPENSLUG_STANDARD_DEPENDS += "reiserfsprogs"
-OPENSLUG_STANDARD_RDEPENDS += "${OPENSLUG_REISER_PROGS}"
-
-# These lines add a build of the 'upslug' program which may be
-# used to download the final image to an NSLU2. The program can
-# be found within the tmp/work/upslug-native* directory.
-OPENSLUG_STANDARD_DEPENDS += "upslug-native"
-
-# These lines add support for an X/Y/ZModem package called lrzsz
-# (this is of use for people with modified NSLU2 hardware which
-# supports a serial port.)
-OPENSLUG_STANDARD_DEPENDS += "lrzsz"
-OPENSLUG_STANDARD_RDEPENDS += "lrzsz"
-
-# The 'standard' values are the defaults for the 'extra' packages added
-# to the firmware image. None of these things are requirements to have
-# a bootable, useable, system however they *are* expected to be present
-# in OpenSlug - see osuclibc for a more minimal configuration and some
-# more instructions about how to make a non-openslug image.
-OPENSLUG_EXTRA_DEPENDS ?= "${OPENSLUG_STANDARD_DEPENDS}"
-OPENSLUG_EXTRA_RDEPENDS ?= "${OPENSLUG_STANDARD_RDEPENDS}"
-
-# Filesystem selection: set in local.conf to override. Adding entries
-# here adds the module to the image. The module must be built as part
-# of openslug-kernel (i.e. it must be specified as a module in the
-# defconfig file). The NLS support charset modules must be given
-# explicitly and must match the codepage/iocharset and NLS handling
-# for the file systems which require them. The installed lanugage
-# set is minimal but sufficient for any file system (since it uses
-# utf8). See http://www.nslu2-linux.orgwiki/HowTo/MountFATFileSystems
-# for more information on the language behaviour of the DOS file
-# systems.
-#
-# KERNEL LEVEL FILE SYSTEM SUPPORT
-# --------------------------------
-# NOTE: removing kernel-module-nfs from this list will prevent NFS
-# boot (however you can do a simple flash file system boot - no
-# attached disk - and install the nfs modules from ssh.)
-OPENSLUG_EXTRA_FILESYSTEMS ?= "\
-kernel-module-ext2 \
-kernel-module-jbd \
-kernel-module-ext3 \
-kernel-module-nfs \
-kernel-module-vfat \
-kernel-module-ntfs \
-kernel-module-isofs \
-kernel-module-udf \
-kernel-module-reiserfs \
-kernel-module-nls-cp437 \
-kernel-module-nls-utf8 \
-"
-
-# This documents other file systems which are built but not installed
-# by default in the flash image.
-#
-# kernel-module-msdos - mounts a FAT file system without long file names
-# (use kernel-module-vfat, it shows the long names
-# if present.)
-
-OPENSLUG_EXTRA_INSTALL ?= "${OPENSLUG_EXTRA_RDEPENDS} ${OPENSLUG_EXTRA_FILESYSTEMS}"
-
-#----------------------------------------------------------------------------------
-# PACKAGE VERSION CONTROL
-#----------------------------------------------------------------------------------
-# Select the correct versions of the compiler tools (note that there
-# is also some selection in machine/nslu2.conf)
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross"
-
-# Select the correct versions of the kernel and modules
-PREFERRED_PROVIDER_virtual/kernel ?= "openslug-kernel"
-PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}depmod:module-init-tools-cross"
-PREFERRED_VERSION_openslug-kernel ?= "2.6.12.2"
-
-PREFERRED_VERSION_ixp4xx-csr ?= "1.4"
-PREFERRED_VERSION_ixp425-eth ?= "1.1"
-
-PREFERRED_VERSION_nslu2-linksys-firmware ?= "2.3r29"
+++ /dev/null
-DISTRO = "openzaurus"
-DISTRO_NAME = "OpenZaurus"
-DISTRO_VERSION = "3.5.4"
-
-include conf/distro/openzaurus.conf
-
-DISTRO_TYPE = "release"
-CVSDATE = "20060102"
-
-FEED_BASE_URI = "http://ewi546.ewi.utwente.nl/mirror/www.openzaurus.org/official/unstable/3.5.4/"
-FEED_URIS += " \
- upgrades##${FEED_BASE_URI}/feed/upgrades \
-machine-upgrades##${FEED_BASE_URI}/feed/upgrades/machine/${MACHINE} \
- machine##${FEED_BASE_URI}/feed/machine/${MACHINE} \
- base##${FEED_BASE_URI}/feed/base "
-
-
-#
-# Zaurus
-#
-
-ASSUME_PROVIDED += "virtual/arm-linux-gcc-2.95"
-OEINCLUDELOGS = "yes"
-KERNEL_CONSOLE = "ttyS0"
-#DEBUG_OPTIMIZATION = "-O -g3"
-#DEBUG_BUILD = "1"
-#INHIBIT_PACKAGE_STRIP = "1"
-
-# enable progressbar on c7x0 like we had in OZ 3.5.3
-OZ_KERNEL_ENABLE_ELPP="yes"
-
-PREFERRED_VERSION_ipkg = "0.99.159"
-
-PREFERRED_VERSION_gcc = "3.4.4"
-PREFERRED_VERSION_gcc-cross = "3.4.4"
-PREFERRED_VERSION_gcc-cross-initial = "3.4.4"
-
-PREFERRED_VERSION_hostap-modules = "0.3.9"
-
-#fix some iconv issues, needs to be adjusted when doing uclibc builds
-PREFERRED_PROVIDER_virtual/libiconv=glibc
-PREFERRED_PROVIDER_virtual/libintl=glibc
-
-
-#
-# Base
-#
-PREFERRED_VERSION_binutils-cross = "2.15.94.0.1"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross"
-
-#Set some default providers where multiple exist
-PREFERRED_PROVIDERS += " tslib:tslib"
-
-#
-# Opie
-#
-PREFERRED_PROVIDERS += " virtual/libqpe:libqpe-opie"
-
-OPIE_VERSION = "1.2.1"
-include conf/distro/preferred-opie-versions.inc
-
-#
-# GPE
-#
-PREFERRED_PROVIDERS += "virtual/xserver:xserver-kdrive"
-PREFERRED_PROVIDERS += "virtual/gconf:gconf-dbus"
-PREFERRED_PROVIDER_gnome-vfs=gnome-vfs-dbus
-PREFERRED_PROVIDER_x11 = "diet-x11"
-PREFERRED_PROVIDER_libgpewidget = "libgpewidget"
-
-include conf/distro/preferred-gpe-versions-2.7.inc
-
-#
-# E
-#
-include conf/distro/preferred-e-versions.inc
-
-# put images into dirs from where we can copy them easier
-DEPLOY_DIR_IMAGE = "${DEPLOY_DIR}/images/${DISTRO_VERSION}/${MACHINE}"
+++ /dev/null
-#@TYPE: Distribution
-#@NAME: OpenZaurus
-#@DESCRIPTION: Distribution configuration for OpenZaurus (http://www.openzaurus.org)
-
-INHERIT += " package_ipk debian"
-# For some reason, this doesn't work
-# TARGET_OS ?= "linux"
-TARGET_OS = "linux"
-TARGET_FPU = "soft"
-
-BOOTSTRAP_EXTRA_DEPENDS += "openzaurus-version"
-BOOTSTRAP_EXTRA_RDEPENDS += "openzaurus-version"
-IMAGE_NAME = "${IMAGE_BASENAME}-${DISTRO_VERSION}-${MACHINE}"
-
-PARALLEL_INSTALL_MODULES = "1"
-
-DISTRO_CHECK := "${@bb.data.getVar("DISTRO_VERSION",d,1) or bb.fatal('Remove this line or set a dummy DISTRO_VERSION if you really want to build an unversioned distro')}"
+++ /dev/null
-#@TYPE: Distribution
-#@NAME: SharpROM
-#@DESCRIPTION: Distribution configuration for SharpROM compatible packages
-
-#
-# This is pretty ad-hoc - feel free to improve as needed :)
-#
-
-INHERIT += " package_ipk debian sharprom"
-
-TARGET_OS = "linux"
-TARGET_FPU = ""
-TARGET_ARCH = "arm"
-TARGET_CC_ARCH = "-march=armv4"
-FULL_OPTIMIZATION = "-fexpensive-optimizations -fomit-frame-pointer -O2"
-
-DISTRO = "sharprom"
-DISTRO_NAME = "SharpROM"
-DISTRO_VERSION = "3.1 compatible"
-DISTRO_TYPE = "debug"
-# DISTRO_TYPE = "release"
-
-#
-# Zaurus
-#
-
-OEINCLUDELOGS = "yes"
-KERNEL_CONSOLE = "tty1"
-#DEBUG_OPTIMIZATION = "-O -g3"
-#DEBUG_BUILD = "1"
-#INHIBIT_PACKAGE_STRIP = "1"
-
-#
-# Base
-#
-
-ASSUME_PROVIDED += "virtual/arm-linux-gcc-2.95 binutils-cross gcc-cross-initial gcc-cross"
-ASSUME_PROVIDED += "virtual/arm-linux-libc-for-gcc virtual/arm-linux-binutils virtual/arm-linux-gcc"
-ASSUME_PROVIDED += "virtual/arm-linux-gcc-initial virtual/arm-linux-gcc-initial
-ASSUME_PROVIDED += "virtual/libc linux-libc-headers"
-
-DEPENDS =+ "sharprom-toolchain-native"
-
-IPKGBUILDCMD = "ipkg-build -c -o 0 -g 0"
-
-#
-# Opie
-#
-
-PREFERRED_PROVIDERS += " virtual/libqpe:libqpe-opie"
-
-OPIE_VERSION = "1.2.0"
-include conf/distro/preferred-opie-versions.inc
-
-#
-# GPE
-#
-
-CVSDATE_xserver-kdrive = "20050208"
-PREFERRED_PROVIDERS += "virtual/xserver:xserver-kdrive"
-PREFERRED_PROVIDERS += " gst-plugins:gpe-gst-plugins"
-
-include conf/distro/preferred-gpe-versions.inc
-
+++ /dev/null
-# automatically generated by bitbake freeze
-BBFILES := "\
-${PKGDIR}/packages/alsa/*.bb \
-${PKGDIR}/packages/atftp/*.bb \
-${PKGDIR}/packages/audiofile/*.bb \
-${PKGDIR}/packages/aumix/*.bb \
-${PKGDIR}/packages/autoconf/*.bb \
-${PKGDIR}/packages/automake/*.bb \
-${PKGDIR}/packages/base-files/*.bb \
-${PKGDIR}/packages/base-passwd/*.bb \
-${PKGDIR}/packages/bash/*.bb \
-${PKGDIR}/packages/bind/*.bb \
-${PKGDIR}/packages/binutils/*.bb \
-${PKGDIR}/packages/bison/*.bb \
-${PKGDIR}/packages/bluez/*.bb \
-${PKGDIR}/packages/boost/*.bb \
-${PKGDIR}/packages/bridge-utils/*.bb \
-${PKGDIR}/packages/busybox/*.bb \
-${PKGDIR}/packages/bwmon/*.bb \
-${PKGDIR}/packages/bzip2/*.bb \
-${PKGDIR}/packages/ccxstream/*.bb \
-${PKGDIR}/packages/coreutils/*.bb \
-${PKGDIR}/packages/cpio/*.bb \
-${PKGDIR}/packages/cron/*.bb \
-${PKGDIR}/packages/ctorrent/*.bb \
-${PKGDIR}/packages/cvs/*.bb \
-${PKGDIR}/packages/db/*.bb \
-${PKGDIR}/packages/devio/*.bb \
-${PKGDIR}/packages/diffstat/*.bb \
-${PKGDIR}/packages/diffutils/*.bb \
-${PKGDIR}/packages/dnsmasq/*.bb \
-${PKGDIR}/packages/dropbear/*.bb \
-${PKGDIR}/packages/e2fsprogs/*.bb \
-${PKGDIR}/packages/expat/*.bb \
-${PKGDIR}/packages/fakeroot/*.bb \
-${PKGDIR}/packages/file/*.bb \
-${PKGDIR}/packages/findutils/*.bb \
-${PKGDIR}/packages/flac/*.bb \
-${PKGDIR}/packages/flex/*.bb \
-${PKGDIR}/packages/freeze/*.bb \
-${PKGDIR}/packages/ftpd-topfield/*.bb \
-${PKGDIR}/packages/gawk/*.bb \
-${PKGDIR}/packages/gcc/*.bb \
-${PKGDIR}/packages/gdb/*.bb \
-${PKGDIR}/packages/gdbm/*.bb \
-${PKGDIR}/packages/gettext/*.bb \
-${PKGDIR}/packages/glib-1.2/*.bb \
-${PKGDIR}/packages/glib-2.0/*.bb \
-${PKGDIR}/packages/gnu-config/*.bb \
-${PKGDIR}/packages/gphoto2/*.bb \
-${PKGDIR}/packages/grep/*.bb \
-${PKGDIR}/packages/gtk-doc/*.bb \
-${PKGDIR}/packages/gzip/*.bb \
-${PKGDIR}/packages/hotplug-ng/*.bb \
-${PKGDIR}/packages/ifupdown/*.bb \
-${PKGDIR}/packages/initscripts/*.bb \
-${PKGDIR}/packages/install/*.bb \
-${PKGDIR}/packages/intltool/*.bb \
-${PKGDIR}/packages/ipkg-utils/*.bb \
-${PKGDIR}/packages/ipkg/*.bb \
-${PKGDIR}/packages/iptables/*.bb \
-${PKGDIR}/packages/ircp/*.bb \
-${PKGDIR}/packages/irssi/*.bb \
-${PKGDIR}/packages/ixp425-eth/*.bb \
-${PKGDIR}/packages/ixp4xx/*.bb \
-${PKGDIR}/packages/joe/*.bb \
-${PKGDIR}/packages/jpeg/*.bb \
-${PKGDIR}/packages/lcdproc/*.bb \
-${PKGDIR}/packages/less/*.bb \
-${PKGDIR}/packages/libaal/*.bb \
-${PKGDIR}/packages/libao/*.bb \
-${PKGDIR}/packages/libdvb/*.bb \
-${PKGDIR}/packages/libexif/*.bb \
-${PKGDIR}/packages/libgphoto2/*.bb \
-${PKGDIR}/packages/libgsm/*.bb \
-${PKGDIR}/packages/libiconv/*.bb \
-${PKGDIR}/packages/libid3tag/*.bb \
-${PKGDIR}/packages/liblockfile/*.bb \
-${PKGDIR}/packages/libmad/*.bb \
-${PKGDIR}/packages/libmikmod/*.bb \
-${PKGDIR}/packages/libogg/*.bb \
-${PKGDIR}/packages/libol/*.bb \
-${PKGDIR}/packages/libpcap/*.bb \
-${PKGDIR}/packages/libpng/*.bb \
-${PKGDIR}/packages/libtiff/*.bb \
-${PKGDIR}/packages/libtool/*.bb \
-${PKGDIR}/packages/libusb/*.bb \
-${PKGDIR}/packages/libvorbis/*.bb \
-${PKGDIR}/packages/libxml/*.bb \
-${PKGDIR}/packages/linux-libc-headers/*.bb \
-${PKGDIR}/packages/linux/*.bb \
-${PKGDIR}/packages/lrzsz/*.bb \
-${PKGDIR}/packages/lsof/*.bb \
-${PKGDIR}/packages/lzo/*.bb \
-${PKGDIR}/packages/m4/*.bb \
-${PKGDIR}/packages/mailx/*.bb \
-${PKGDIR}/packages/make/*.bb \
-${PKGDIR}/packages/makedevs/*.bb \
-${PKGDIR}/packages/meta/*.bb \
-${PKGDIR}/packages/mgetty/*.bb \
-${PKGDIR}/packages/miau/*.bb \
-${PKGDIR}/packages/microcom/*.bb \
-${PKGDIR}/packages/module-init-tools/*.bb \
-${PKGDIR}/packages/modutils/*.bb \
-${PKGDIR}/packages/mt-daapd/*.bb \
-${PKGDIR}/packages/mtd/*.bb \
-${PKGDIR}/packages/musicpd/*.bb \
-${PKGDIR}/packages/mutt/*.bb \
-${PKGDIR}/packages/nail/*.bb \
-${PKGDIR}/packages/nano/*.bb \
-${PKGDIR}/packages/ncftp/*.bb \
-${PKGDIR}/packages/ncurses/*.bb \
-${PKGDIR}/packages/netbase/*.bb \
-${PKGDIR}/packages/netpbm/*.bb \
-${PKGDIR}/packages/nmap/*.bb \
-${PKGDIR}/packages/ntp/*.bb \
-${PKGDIR}/packages/obexftp/*.bb \
-${PKGDIR}/packages/openldap/*.bb \
-${PKGDIR}/packages/openntpd/*.bb \
-${PKGDIR}/packages/openobex-apps/*.bb \
-${PKGDIR}/packages/openobex/*.bb \
-${PKGDIR}/packages/openslug-init/*.bb \
-${PKGDIR}/packages/openssh/*.bb \
-${PKGDIR}/packages/openssl/*.bb \
-${PKGDIR}/packages/openvpn/*.bb \
-${PKGDIR}/packages/patch/*.bb \
-${PKGDIR}/packages/patcher/*.bb \
-${PKGDIR}/packages/pciutils/*.bb \
-${PKGDIR}/packages/pcmcia-cs/*.bb \
-${PKGDIR}/packages/pcre/*.bb \
-${PKGDIR}/packages/perl/*.bb \
-${PKGDIR}/packages/pkgconfig/*.bb \
-${PKGDIR}/packages/popt/*.bb \
-${PKGDIR}/packages/portmap/*.bb \
-${PKGDIR}/packages/ppp/*.bb \
-${PKGDIR}/packages/procps/*.bb \
-${PKGDIR}/packages/puppy/*.bb \
-${PKGDIR}/packages/pwc/*.bb \
-${PKGDIR}/packages/python/*.bb \
-${PKGDIR}/packages/qc-usb/*.bb \
-${PKGDIR}/packages/quilt/*.bb \
-${PKGDIR}/packages/readline/*.bb \
-${PKGDIR}/packages/reiser4progs/*.bb \
-${PKGDIR}/packages/reiserfsprogs/*.bb \
-${PKGDIR}/packages/rsync/*.bb \
-${PKGDIR}/packages/samba/*.bb \
-${PKGDIR}/packages/sane-backends/*.bb \
-${PKGDIR}/packages/sed/*.bb \
-${PKGDIR}/packages/setpwc/*.bb \
-${PKGDIR}/packages/ssmtp/*.bb \
-${PKGDIR}/packages/strace/*.bb \
-${PKGDIR}/packages/streamripper/*.bb \
-${PKGDIR}/packages/sudo/*.bb \
-${PKGDIR}/packages/sysfsutils/*.bb \
-${PKGDIR}/packages/syslog-ng/*.bb \
-${PKGDIR}/packages/sysvinit/*.bb \
-${PKGDIR}/packages/tar/*.bb \
-${PKGDIR}/packages/thttpd/*.bb \
-${PKGDIR}/packages/timezones/*.bb \
-${PKGDIR}/packages/tinylogin/*.bb \
-${PKGDIR}/packages/uclibc/*.bb \
-${PKGDIR}/packages/udev/*.bb \
-${PKGDIR}/packages/unionfs/*.bb \
-${PKGDIR}/packages/unzip/*.bb \
-${PKGDIR}/packages/update-modules/*.bb \
-${PKGDIR}/packages/update-rc.d/*.bb \
-${PKGDIR}/packages/upslug/*.bb \
-${PKGDIR}/packages/usbutils/*.bb \
-${PKGDIR}/packages/util-linux/*.bb \
-${PKGDIR}/packages/vim/*.bb \
-${PKGDIR}/packages/vlan/*.bb \
-${PKGDIR}/packages/vsftpd/*.bb \
-${PKGDIR}/packages/wakelan/*.bb \
-${PKGDIR}/packages/wget/*.bb \
-${PKGDIR}/packages/wireless-tools/*.bb \
-${PKGDIR}/packages/zlib/*.bb \
-${UCSLUGC_EXTRA_BBFILES}"
+++ /dev/null
-#@TYPE: Distribution
-#@NAME: UcSlugC
-#@DESCRIPTION: UcSlugC Linux Distribution for the NSLU2
-
-#----------------------------------------------------------------------------------
-# STANDARD UcSlugC DEFINITIONS
-#----------------------------------------------------------------------------------
-DISTRO_NAME = "UcSlugC"
-DISTRO_VERSION = "3-beta"
-DISTRO_FEED = "unstable"
-DISTRO_TYPE ?= "beta"
-
-TARGET_FPU = "soft"
-TARGET_OS = "linux-uclibc"
-
-# Select thumb-interwork and (TBD) thumb
-ARM_INTERWORK = ":thumb-interwork"
-ARM_INSTRUCTION_SET = ":thumb"
-
-USE_NLS ?= "no"
-USE_NLS_glib-2.0 = "yes"
-
-INHERIT += " package_ipk debian"
-
-# The OVERRIDES are modified here so that 'openslug' overrides are picked up if
-# present (ucslugc overrides take precedence).
-NSLU2_BASE_DISTRO = ":openslug"
-
-# We are building packages which are armvteb (big endian) for arm or thumbv5tb for
-# thumb instructions. The PACKAGE_ARCH should reflect this because generated code
-# requires that instruction set support.
-PACKAGE_ARCH = "${NSLU2_PACKAGE_ARCH}"
-
-# NOTE: to build new packages set UCSLUGC_EXTRA_BBFILES to the full path name to
-# the .bb files for the packages to build - see ucslugc-packages.conf in this
-# directory
-UCSLUGC_EXTRA_BBFILES ?= ""
-
-# pull in the frozen list of bbfiles - this sets BBFILES and this will override any
-# setting in local.conf
-include conf/distro/freeze.conf
-
-#----------------------------------------------------------------------------------
-# FEEDS
-# The following lines define where on the internet UcSlugC looks for packages
-# when downloading new packages or updating existing packages. Additional feeds
-# (such as a local feed) can be defined in local.conf
-#----------------------------------------------------------------------------------
-# Add to the user's feeds from local.conf (there may be none)
-#
-#NOTE: at present there is no released feed for ucslugc, therefore this feed
-# is set to the 'unstable' version. In released images DISTRO_FEED will typically
-# be DISTRO_VERSION.
-FEED_URIS_append += "cross##http://ipkg.nslu2-linux.org/feeds/ucslugc/cross/${DISTRO_FEED}"
-FEED_URIS_append += "native##http://ipkg.nslu2-linux.org/feeds/ucslugc/native/${DISTRO_FEED}"
-
-#
-# Uncomment the following to get the unstable feeds in a released version.
-#FEED_URIS_append += "unstable_cross##http://ipkg.nslu2-linux.org/feeds/ucslugc/cross/unstable"
-#FEED_URIS_append += "unstable_native##http://ipkg.nslu2-linux.org/feeds/ucslugc/native/unstable"
-
-#----------------------------------------------------------------------------------
-# FIRMWARE CONFIGURATION
-#----------------------------------------------------------------------------------
-# IMAGE BUILD OPTIONS
-# -------------------
-IMAGE_FSTYPES = "jffs2"
-
-OPENSLUG_DEVICE_TABLE = "${@bb.which(bb.data.getVar('BBPATH', d, 1), 'files/device_table-openslug.txt')}"
-EXTRA_IMAGECMD_jffs2 = "--pad --big-endian --eraseblock=0x20000 -D ${OPENSLUG_DEVICE_TABLE}"
-
-# CMDLINE* macros define the kernel command line. CMDLINE_DEBUG is provided
-# to enable/disable debugging in the distro. Here noirqdebug is used to
-# remove the messages about unhandled interrupts - people debugging interrupt
-# issues in the kernel need to cancel this (set CMDLINE_DEBUG empty in local.conf)
-CMDLINE_DEBUG = "noirqdebug"
-
-# IMAGE_PREPROCESS_COMMAND is run before making the image. In UcSlugC the
-# kernel image is removed from the root file system to recover the space used -
-# UcSlugC is assumed to boot from a separate kernel image in flash (not in the
-# root file system), if this is not the case the following must not be done!
-IMAGE_PREPROCESS_COMMAND = "rm ${IMAGE_ROOTFS}/boot/zImage*;"
-
-# Building a full image. If you add the following extra commands will be
-# appended to the openslug-image build by classes/nslu2-jffs2-image.bbclass
-# (note that you can, instead, simply add 'inherit nslu2-jffs2-image' to
-# openslug-image.bb). If you do this you will need to find a source for the
-# LinkSys software to be placed in the full image - 'RedBoot' (the boot loader),
-# 'Trailer' (just a bunch of bytes to flag the image as valid) and 'SysConf'
-# (actually just a block of unset data - you could modify this to pre-configure
-# the SysConf partition of the image). If you own an NSLU2 then this data is
-# already in the flash of the NSLU2 and you can download it (including new
-# versions) from the LinkSys web site - the bbclass will output information
-# about where to put the downloaded data.
-#
-#NOTE: you do not actually need the boot loader in normal use because it is
-# *not* overwritten by a standard upslug upgrade, so you can make an image with
-# just non-LinkSys software which can be flashed into the NSLU2.
-
-#INHERIT += " nslu2-jffs2-image"
-
-# EXTRA PACKAGES
-# --------------
-# UcSlugC builds an openslug-image with no extra packages - to add packages to the
-# firmware copy this file (to make a new 'distro' configuration file) and change
-# the definition below to include the requirements.
-# NOTE: as built this system will *not* be able to boot off anything other than
-# the flash file system ('turnup' will not work). You need to add the filesystem
-# modules for your chosen root file system (and any others which will be used).
-# See openslug.conf for a more full-featured system!
-UCSLUGC_EXTRA_RDEPENDS ?= ""
-UCSLUGC_EXTRA_DEPENDS ?= ""
-#USLUGC_EXTRA_BBFILES above may also need to be set
-
-# These depends define native utilities - they do not get put in the flash.
-# upslug2 (in tmp/work/upslug2-native-*) is the program to write the NSLU2 flash
-# Override this as desired - it makes no difference to the final image.
-UCSLUGC_NATIVE_DEPENDS ?= "upslug2-native"
-
-OPENSLUG_EXTRA_INSTALL = "${UCSLUGC_EXTRA_RDEPENDS}"
-OPENSLUG_EXTRA_DEPENDS = "${UCSLUGC_EXTRA_DEPENDS} ${UCSLUGC_NATIVE_DEPENDS}"
-
-#----------------------------------------------------------------------------------
-# PACKAGE VERSION CONTROL
-#----------------------------------------------------------------------------------
-# Select the correct versions of the compiler tools (note that there
-# is also some selection in machine/nslu2.conf)
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross"
-
-# Select the correct versions of the kernel and modules
-PREFERRED_PROVIDER_virtual/kernel ?= "openslug-kernel"
-PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}depmod:module-init-tools-cross"
-PREFERRED_VERSION_openslug-kernel ?= "2.6.14-rc2"
-
-PREFERRED_VERSION_ixp4xx-csr ?= "1.4"
-PREFERRED_VERSION_ixp425-eth ?= "1.1"
-
-PREFERRED_VERSION_samba ?= "3.0.14a"
-
-PREFERRED_VERSION_nslu2-linksys-firmware ?= "2.3r29"
+++ /dev/null
-# automatically generated by bitbake freeze
-BBFILES := "\
-${PKGDIR}/packages/autoconf/*.bb \
-${PKGDIR}/packages/automake/*.bb \
-${PKGDIR}/packages/binutils/*.bb \
-${PKGDIR}/packages/bison/*.bb \
-${PKGDIR}/packages/busybox/*.bb \
-${PKGDIR}/packages/cpio/*.bb \
-${PKGDIR}/packages/devio/*.bb \
-${PKGDIR}/packages/fakeroot/*.bb \
-${PKGDIR}/packages/findutils/*.bb \
-${PKGDIR}/packages/flex/*.bb \
-${PKGDIR}/packages/freeze/*.bb \
-${PKGDIR}/packages/gcc/*.bb \
-${PKGDIR}/packages/genext2fs/*.bb \
-${PKGDIR}/packages/gettext/*.bb \
-${PKGDIR}/packages/glibc/*.bb \
-${PKGDIR}/packages/gnu-config/*.bb \
-${PKGDIR}/packages/ipkg-utils/*.bb \
-${PKGDIR}/packages/ipkg/*.bb \
-${PKGDIR}/packages/libtool/*.bb \
-${PKGDIR}/packages/linux-libc-headers/*.bb \
-${PKGDIR}/packages/linux/*.bb \
-${PKGDIR}/packages/m4/*.bb \
-${PKGDIR}/packages/makedevs/*.bb \
-${PKGDIR}/packages/meta/*.bb \
-${PKGDIR}/packages/modutils/*.bb \
-${PKGDIR}/packages/mtd/*.bb \
-${PKGDIR}/packages/nslu2-binary-only/*.bb \
-${PKGDIR}/packages/pkgconfig/*.bb \
-${PKGDIR}/packages/portmap/*.bb \
-${PKGDIR}/packages/quilt/*.bb \
-${PKGDIR}/packages/slugimage/*.bb \
-${PKGDIR}/packages/unzip/*.bb \
-${PKGDIR}/packages/update-modules/*.bb \
-${PKGDIR}/packages/wget/*.bb \
-${PKGDIR}/packages/zd1211/*.bb \
-${PKGDIR}/packages/zlib/*.bb \
-${UNSLUNG_EXTRA_BBFILES}"
+++ /dev/null
-#@TYPE: Distribution
-#@NAME: Unslung
-#@DESCRIPTION: Unslung Linux Distribution for the NSLU2
-
-DISTRO_NAME = "Unslung"
-DISTRO_VERSION = "6.0-alpha"
-DISTRO_TYPE = "beta"
-
-FEED_URIS = "cross##http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/unstable"
-FEED_URIS += "native##http://ipkg.nslu2-linux.org/feeds/optware/nslu2/native/unstable"
-FEED_URIS += "oe##http://ipkg.nslu2-linux.org/feeds/unslung/modules/cross/unstable"
-
-# pull in the frozen list of bbfiles
-UNSLUNG_EXTRA_BBFILES ?= ""
-include conf/distro/freeze.conf
-
-TARGET_FPU = "soft"
-TARGET_OS = "linux"
-
-FULL_OPTIMIZATION = "-fexpensive-optimizations -fomit-frame-pointer -frename-registers -O2"
-
-INHERIT += " package_ipk nslu2-ramdisk-image"
-
-# The OVERRIDES are modified here so that 'unslung' overrides are picked up if
-# present (unslung-binary-kernel overrides take precedence).
-NSLU2_BASE_DISTRO = ":unslung"
-
-IMAGE_FSTYPE = "ext2.gz"
-UNSLUNG_DEVICE_TABLE = "${@bb.which(bb.data.getVar('BBPATH', d, 1), 'files/device_table-unslung.txt')}"
-EXTRA_IMAGECMD_ext2.gz = "-D ${UNSLUNG_DEVICE_TABLE}"
-IMAGE_ROOTFS_SIZE_ext2.gz = "14000"
-
-UNSLUNG_EXTRA_DEPENDS ?= ""
-UNSLUNG_EXTRA_RDEPENDS ?= "\
-kernel-module-usbnet \
-kernel-module-pegasus kernel-module-kaweth \
-kernel-module-usbserial \
-kernel-module-pl2303 kernel-module-ftdi-sio"
-
-UNSLUNG_EXTRA_INSTALL ?= "${UNSLUNG_EXTRA_RDEPENDS}"
-
-# Select between multiple alternative providers, if more than one is eligible.
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross"
-
-PREFERRED_VERSION_glibc ?= "2.2.5"
-PREFERRED_VERSION_glibc-initial ?= "2.2.5"
-PREFERRED_VERSION_binutils ?= "2.15.94.0.1"
-PREFERRED_VERSION_binutils-cross ?= "2.15.94.0.1"
-
-PREFERRED_VERSION_unslung-kernel ?= "2.4.22.l2.3r63"
-PREFERRED_VERSION_unslung-rootfs ?= "2.3r63"
-PREFERRED_VERSION_nslu2-linksys-firmware ?= "2.3r63"
-PREFERRED_VERSION_nslu2-linksys-libs ?= "2.3r63"
-PREFERRED_VERSION_nslu2-linksys-ramdisk ?= "2.3r63"
+++ /dev/null
-# automatically generated by bitbake freeze
-BBFILES := "\
-${PKGDIR}/packages/autoconf/*.bb \
-${PKGDIR}/packages/automake/*.bb \
-${PKGDIR}/packages/binutils/*.bb \
-${PKGDIR}/packages/bison/*.bb \
-${PKGDIR}/packages/busybox/*.bb \
-${PKGDIR}/packages/cpio/*.bb \
-${PKGDIR}/packages/devio/*.bb \
-${PKGDIR}/packages/fakeroot/*.bb \
-${PKGDIR}/packages/findutils/*.bb \
-${PKGDIR}/packages/flex/*.bb \
-${PKGDIR}/packages/freeze/*.bb \
-${PKGDIR}/packages/gcc/*.bb \
-${PKGDIR}/packages/genext2fs/*.bb \
-${PKGDIR}/packages/gettext/*.bb \
-${PKGDIR}/packages/glibc/*.bb \
-${PKGDIR}/packages/gnu-config/*.bb \
-${PKGDIR}/packages/ipkg-utils/*.bb \
-${PKGDIR}/packages/ipkg/*.bb \
-${PKGDIR}/packages/libtool/*.bb \
-${PKGDIR}/packages/linux-libc-headers/*.bb \
-${PKGDIR}/packages/linux/*.bb \
-${PKGDIR}/packages/m4/*.bb \
-${PKGDIR}/packages/makedevs/*.bb \
-${PKGDIR}/packages/meta/*.bb \
-${PKGDIR}/packages/modutils/*.bb \
-${PKGDIR}/packages/mtd/*.bb \
-${PKGDIR}/packages/nslu2-binary-only/*.bb \
-${PKGDIR}/packages/pkgconfig/*.bb \
-${PKGDIR}/packages/portmap/*.bb \
-${PKGDIR}/packages/quilt/*.bb \
-${PKGDIR}/packages/slugimage/*.bb \
-${PKGDIR}/packages/unzip/*.bb \
-${PKGDIR}/packages/update-modules/*.bb \
-${PKGDIR}/packages/wget/*.bb \
-${PKGDIR}/packages/wireless-tools/*.bb \
-${PKGDIR}/packages/zlib/*.bb \
-${PKGDIR}/packages/zd1211/*.bb \
-${UNSLUNG_EXTRA_BBFILES}"
+++ /dev/null
-#@TYPE: Distribution
-#@NAME: Unslung
-#@DESCRIPTION: Unslung Linux Distribution for the NSLU2
-
-DISTRO_NAME = "Unslung"
-DISTRO_VERSION = "5.6-beta"
-DISTRO_TYPE = "beta"
-
-FEED_URIS = "cross##http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable"
-FEED_URIS += "native##http://ipkg.nslu2-linux.org/feeds/optware/nslu2/cross/stable"
-FEED_URIS += "oe##http://ipkg.nslu2-linux.org/feeds/unslung/modules/cross/stable"
-
-# pull in the frozen list of bbfiles
-UNSLUNG_EXTRA_BBFILES ?= ""
-include conf/distro/freeze.conf
-
-TARGET_FPU = "soft"
-TARGET_OS = "linux"
-
-FULL_OPTIMIZATION = "-fexpensive-optimizations -fomit-frame-pointer -frename-registers -O2"
-
-INHERIT += " package_ipk nslu2-jffs2-image"
-
-IMAGE_FSTYPE = "jffs2"
-UNSLUNG_DEVICE_TABLE = "${@bb.which(bb.data.getVar('BBPATH', d, 1), 'files/device_table-unslung.txt')}"
-EXTRA_IMAGECMD_jffs2 = "--pad --big-endian --eraseblock=0x20000 -D ${UNSLUNG_DEVICE_TABLE}"
-
-UNSLUNG_EXTRA_DEPENDS ?= ""
-UNSLUNG_EXTRA_RDEPENDS ?= "\
-kernel-module-usbnet \
-kernel-module-pegasus kernel-module-kaweth \
-kernel-module-usbserial \
-kernel-module-pl2303 kernel-module-ftdi-sio"
-
-UNSLUNG_EXTRA_INSTALL ?= "${UNSLUNG_EXTRA_RDEPENDS}"
-
-# Select between multiple alternative providers, if more than one is eligible.
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross"
-
-PREFERRED_VERSION_glibc ?= "2.2.5"
-PREFERRED_VERSION_glibc-initial ?= "2.2.5"
-PREFERRED_VERSION_binutils ?= "2.15.94.0.1"
-PREFERRED_VERSION_binutils-cross ?= "2.15.94.0.1"
-
-PREFERRED_VERSION_unslung-kernel ?= "2.4.22.l2.3r29"
-PREFERRED_VERSION_unslung-rootfs ?= "2.3r29"
-PREFERRED_VERSION_nslu2-linksys-firmware ?= "2.3r29"
-PREFERRED_VERSION_nslu2-linksys-libs ?= "2.3r29"
-PREFERRED_VERSION_nslu2-linksys-ramdisk ?= "2.3r29"
+++ /dev/null
-#@TYPE: Distribution
-#@NAME: WRT54OE Linux
-#@DESCRIPTION: Distribution configuration for the WRT54 Linux
-
-# this distribution is mainly for wireless networking devices and includes
-# packages necessary for wireless LAN access point, routing, encryption and
-# especially mesh routing applications
-#
-# it is primarily aimed at the Linksys WRT54G(S) routers and other
-# mipsel based platforms supported by OpenWRT (we base on their work)
-
-INHERIT += "package_ipk debian"
-
-TARGET_OS = "linux-uclibc"
-
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}libc-for-gcc:uclibc"
-
-PREFERRED_VERSION_gcc-cross-initial = "3.4.4"
-PREFERRED_VERSION_gcc-cross = "3.4.4"
-PREFERRED_VERSION_gcc-cross-sdk = "3.4.4"
-PREFERRED_VERSION_gcc = "3.4.4"
-
-IMAGE_NAME = "${IMAGE_BASENAME}-${MACHINE}_${BUILDNAME}"
-KERNEL_IMAGE_NAME = "kernel-${KV}-${MACHINE}_${BUILDNAME}"
-
+++ /dev/null
-PREFERRED_VERSION_samba = "3.0.14a"
-
-#adapt these to match your directory lay-out
-DL_DIR = "/home/koen/OE/downloads"
-BBFILES := "/home/koen/OE/monotone/org.openembedded.oz354fam083/packages/*/*.bb"
-
-#INHERIT += "sourcepkg"
-
-CCACHE=""
-
-#DEBUG_BUILD = "1"
-#INHIBIT_PACKAGE_STRIP = "1"
-
-#Set some default providers where multiple exist
-PREFERRED_PROVIDER_virtual/libiconv=glibc
-PREFERRED_PROVIDER_virtual/libintl=glibc
-PREFERRED_PROVIDER_gnome-vfs=gnome-vfs-dbus
-PREFERRED_PROVIDER_x11=diet-x11
-
-
-#what kind of images do we want?
-IMAGE_FSTYPE="jffs2 tar ext2"
-
-#Some providers for the toolchain
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross"
-PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross"
-
-PREFERRED_VERSION_gcc = "3.4.4"
-PREFERRED_VERSION_gcc-cross = "3.4.4"
-PREFERRED_VERSION_gcc-cross-initial = "3.4.4"
-
-
-#set TMPDIR instead of defaulting it to $pwd/tmp
-TMPDIR=/data/build/koen/OE/build/tmp/${DISTRO}
-
-#Make use of my SMP box
-PARALLEL_MAKE="-j2"
-
-#multimachine build stuff
-KERNEL_STAGING = "${STAGING_DIR}/${PACKAGE_ARCH}-${HOST_OS}/kernel"
-STAGING_KERNEL_DIR = "${STAGING_DIR}/${PACKAGE_ARCH}-${HOST_OS}/kernel"
-STAMP = "${TMPDIR}/stamps/${PACKAGE_ARCH}-${HOST_OS}/${PF}"
-WORKDIR = "${TMPDIR}/work/${PACKAGE_ARCH}-${HOST_OS}/${PF}"
-
-#Set distro and version
-DISTRO = "familiar-0.8.3"
-
-#Add verbosity to make fixing easier
-BBINCLUDELOGS = "yes"
-
-#The name says it all
-CVS_TARBALL_STASH = "http://familiar.handhelds.org/source/v0.8.3/"
-
-
-
-#needed for zauruskernels
-ASSUME_PROVIDED = virtual/arm-linux-gcc-2.95
-
+++ /dev/null
-#adapt these to match your directory layout
-DL_DIR = "/home/hrw/devel/sources/dl_dir/"
-BBFILES := "/home/hrw/devel/oe/org.openembedded.oz354fam083/packages/*/*.bb"
-
-#set distro and version
-DISTRO = "openzaurus-3.5.4"
-
-#what kind of images do we want?
-IMAGE_FSTYPE="jffs2 tar"
-
-#Make use of my SMP box
-PARALLEL_MAKE="-j2"
-
-#multimachine build stuff
-KERNEL_STAGING = "${STAGING_DIR}/${PACKAGE_ARCH}-${HOST_OS}/kernel"
-STAGING_KERNEL_DIR = "${STAGING_DIR}/${PACKAGE_ARCH}-${HOST_OS}/kernel"
-STAMP = "${TMPDIR}/stamps/${PACKAGE_ARCH}-${HOST_OS}/${PF}"
-WORKDIR = "${TMPDIR}/work/${PACKAGE_ARCH}-${HOST_OS}/${PF}"
-
-#Add verbosity to make fixing easier
-BBINCLUDELOGS = "yes"
-
-#The name says it all
-CVS_TARBALL_STASH = "http://www.oesources.org/source/current/"
projects / familiar-h63xx-build.git / commitdiff