]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[POWERPC] pci32: Remove PowerMac P2P bridge IO hack
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>
Thu, 20 Dec 2007 03:54:44 +0000 (14:54 +1100)
committerPaul Mackerras <paulus@samba.org>
Thu, 20 Dec 2007 05:18:06 +0000 (16:18 +1100)
The 32 bits PowerPC PCI code has a hack for use by some PowerMacs
to try to re-open PCI<->PCI bridge IO resources that were closed
by the firmware.  This is no longer necessary as the generic code
will now do that for us.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
arch/powerpc/kernel/pci_32.c

index 1020d04b0a5afc283bdcf8e6ebc72f550bdc71b8..dfb1658025299b0e9eddaf2bf68d3d4009a4a5a9 100644 (file)
@@ -711,217 +711,6 @@ void pcibios_make_OF_bus_map(void)
 }
 #endif /* CONFIG_PPC_OF */
 
-#ifdef CONFIG_PPC_PMAC
-/*
- * This set of routines checks for PCI<->PCI bridges that have closed
- * IO resources and have child devices. It tries to re-open an IO
- * window on them.
- *
- * This is a _temporary_ fix to workaround a problem with Apple's OF
- * closing IO windows on P2P bridges when the OF drivers of cards
- * below this bridge don't claim any IO range (typically ATI or
- * Adaptec).
- *
- * A more complete fix would be to use drivers/pci/setup-bus.c, which
- * involves a working pcibios_fixup_pbus_ranges(), some more care about
- * ordering when creating the host bus resources, and maybe a few more
- * minor tweaks
- */
-
-/* Initialize bridges with base/limit values we have collected */
-static void __init
-do_update_p2p_io_resource(struct pci_bus *bus, int enable_vga)
-{
-       struct pci_dev *bridge = bus->self;
-       struct pci_controller* hose = (struct pci_controller *)bridge->sysdata;
-       u32 l;
-       u16 w;
-       struct resource res;
-
-       if (bus->resource[0] == NULL)
-               return;
-       res = *(bus->resource[0]);
-
-       DBG("Remapping Bus %d, bridge: %s\n", bus->number, pci_name(bridge));
-       res.start -= ((unsigned long) hose->io_base_virt - isa_io_base);
-       res.end -= ((unsigned long) hose->io_base_virt - isa_io_base);
-       DBG("  IO window: %016llx-%016llx\n", res.start, res.end);
-
-       /* Set up the top and bottom of the PCI I/O segment for this bus. */
-       pci_read_config_dword(bridge, PCI_IO_BASE, &l);
-       l &= 0xffff000f;
-       l |= (res.start >> 8) & 0x00f0;
-       l |= res.end & 0xf000;
-       pci_write_config_dword(bridge, PCI_IO_BASE, l);
-
-       if ((l & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
-               l = (res.start >> 16) | (res.end & 0xffff0000);
-               pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, l);
-       }
-
-       pci_read_config_word(bridge, PCI_COMMAND, &w);
-       w |= PCI_COMMAND_IO;
-       pci_write_config_word(bridge, PCI_COMMAND, w);
-
-#if 0 /* Enabling this causes XFree 4.2.0 to hang during PCI probe */
-       if (enable_vga) {
-               pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, &w);
-               w |= PCI_BRIDGE_CTL_VGA;
-               pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, w);
-       }
-#endif
-}
-
-/* This function is pretty basic and actually quite broken for the
- * general case, it's enough for us right now though. It's supposed
- * to tell us if we need to open an IO range at all or not and what
- * size.
- */
-static int __init
-check_for_io_childs(struct pci_bus *bus, struct resource* res, int *found_vga)
-{
-       struct pci_dev *dev;
-       int     i;
-       int     rc = 0;
-
-#define push_end(res, mask) do {               \
-       BUG_ON((mask+1) & mask);                \
-       res->end = (res->end + mask) | mask;    \
-} while (0)
-
-       list_for_each_entry(dev, &bus->devices, bus_list) {
-               u16 class = dev->class >> 8;
-
-               if (class == PCI_CLASS_DISPLAY_VGA ||
-                   class == PCI_CLASS_NOT_DEFINED_VGA)
-                       *found_vga = 1;
-               if (class >> 8 == PCI_BASE_CLASS_BRIDGE && dev->subordinate)
-                       rc |= check_for_io_childs(dev->subordinate, res, found_vga);
-               if (class == PCI_CLASS_BRIDGE_CARDBUS)
-                       push_end(res, 0xfff);
-
-               for (i=0; i<PCI_NUM_RESOURCES; i++) {
-                       struct resource *r;
-                       unsigned long r_size;
-
-                       if (dev->class >> 8 == PCI_CLASS_BRIDGE_PCI
-                           && i >= PCI_BRIDGE_RESOURCES)
-                               continue;
-                       r = &dev->resource[i];
-                       r_size = r->end - r->start;
-                       if (r_size < 0xfff)
-                               r_size = 0xfff;
-                       if (r->flags & IORESOURCE_IO && (r_size) != 0) {
-                               rc = 1;
-                               push_end(res, r_size);
-                       }
-               }
-       }
-
-       return rc;
-}
-
-/* Here we scan all P2P bridges of a given level that have a closed
- * IO window. Note that the test for the presence of a VGA card should
- * be improved to take into account already configured P2P bridges,
- * currently, we don't see them and might end up configuring 2 bridges
- * with VGA pass through enabled
- */
-static void __init
-do_fixup_p2p_level(struct pci_bus *bus)
-{
-       struct pci_bus *b;
-       int i, parent_io;
-       int has_vga = 0;
-
-       for (parent_io=0; parent_io<4; parent_io++)
-               if (bus->resource[parent_io]
-                   && bus->resource[parent_io]->flags & IORESOURCE_IO)
-                       break;
-       if (parent_io >= 4)
-               return;
-
-       list_for_each_entry(b, &bus->children, node) {
-               struct pci_dev *d = b->self;
-               struct pci_controller* hose = (struct pci_controller *)d->sysdata;
-               struct resource *res = b->resource[0];
-               struct resource tmp_res;
-               unsigned long max;
-               int found_vga = 0;
-
-               memset(&tmp_res, 0, sizeof(tmp_res));
-               tmp_res.start = bus->resource[parent_io]->start;
-
-               /* We don't let low addresses go through that closed P2P bridge, well,
-                * that may not be necessary but I feel safer that way
-                */
-               if (tmp_res.start == 0)
-                       tmp_res.start = 0x1000;
-       
-               if (!list_empty(&b->devices) && res && res->flags == 0 &&
-                   res != bus->resource[parent_io] &&
-                   (d->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
-                   check_for_io_childs(b, &tmp_res, &found_vga)) {
-                       u8 io_base_lo;
-
-                       printk(KERN_INFO "Fixing up IO bus %s\n", b->name);
-
-                       if (found_vga) {
-                               if (has_vga) {
-                                       printk(KERN_WARNING "Skipping VGA, already active"
-                                           " on bus segment\n");
-                                       found_vga = 0;
-                               } else
-                                       has_vga = 1;
-                       }
-                       pci_read_config_byte(d, PCI_IO_BASE, &io_base_lo);
-
-                       if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32)
-                               max = ((unsigned long) hose->io_base_virt
-                                       - isa_io_base) + 0xffffffff;
-                       else
-                               max = ((unsigned long) hose->io_base_virt
-                                       - isa_io_base) + 0xffff;
-
-                       *res = tmp_res;
-                       res->flags = IORESOURCE_IO;
-                       res->name = b->name;
-               
-                       /* Find a resource in the parent where we can allocate */
-                       for (i = 0 ; i < 4; i++) {
-                               struct resource *r = bus->resource[i];
-                               if (!r)
-                                       continue;
-                               if ((r->flags & IORESOURCE_IO) == 0)
-                                       continue;
-                               DBG("Trying to allocate from %016llx, size %016llx from parent"
-                                   " res %d: %016llx -> %016llx\n",
-                                       res->start, res->end, i, r->start, r->end);
-                       
-                               if (allocate_resource(r, res, res->end + 1, res->start, max,
-                                   res->end + 1, NULL, NULL) < 0) {
-                                       DBG("Failed !\n");
-                                       continue;
-                               }
-                               do_update_p2p_io_resource(b, found_vga);
-                               break;
-                       }
-               }
-               do_fixup_p2p_level(b);
-       }
-}
-
-static void
-pcibios_fixup_p2p_bridges(void)
-{
-       struct pci_bus *b;
-
-       list_for_each_entry(b, &pci_root_buses, node)
-               do_fixup_p2p_level(b);
-}
-
-#endif /* CONFIG_PPC_PMAC */
-
 static int __init
 pcibios_init(void)
 {
@@ -961,9 +750,7 @@ pcibios_init(void)
        pcibios_allocate_bus_resources(&pci_root_buses);
        pcibios_allocate_resources(0);
        pcibios_allocate_resources(1);
-#ifdef CONFIG_PPC_PMAC
-       pcibios_fixup_p2p_bridges();
-#endif /* CONFIG_PPC_PMAC */
+
        DBG("PCI: Assigning unassigned resouces...\n");
        pci_assign_unassigned_resources();