usb: kill prehistorical comments about USB_EHCI_HCD

Remove old comments about USB_EHCI_HCD.

Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2c63bfb1f8d94e8a5e6c6db5a0fd45fcaa508aa7..c1cfed7eefb5969904cf638b931e9900ffb8b98a 100644 (file)
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -24,10 +24,7 @@ config USB_EHCI_HCD
          The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
          "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
          If your USB host controller supports USB 2.0, you will likely want to
-         configure this Host Controller Driver.  At the time of this writing, 
-         the primary implementation of EHCI is a chip from NEC, widely available
-         in add-on PCI cards, but implementations are in the works from other 
-         vendors including Intel and Philips.  Motherboard support is appearing.
+         configure this Host Controller Driver.
 
          EHCI controllers are packaged with "companion" host controllers (OHCI
          or UHCI) to handle USB 1.1 devices connected to root hub ports.  Ports