]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
mn10300: add the MN10300/AM33 architecture to the kernel
authorDavid Howells <dhowells@redhat.com>
Fri, 8 Feb 2008 12:19:31 +0000 (04:19 -0800)
committerLinus Torvalds <torvalds@woody.linux-foundation.org>
Fri, 8 Feb 2008 17:22:30 +0000 (09:22 -0800)
Add architecture support for the MN10300/AM33 CPUs produced by MEI to the
kernel.

This patch also adds board support for the ASB2303 with the ASB2308 daughter
board, and the ASB2305.  The only processor supported is the MN103E010, which
is an AM33v2 core plus on-chip devices.

[akpm@linux-foundation.org: nuke cvs control strings]
Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com>
Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
234 files changed:
Documentation/mn10300/ABI.txt [new file with mode: 0644]
Documentation/mn10300/compartmentalisation.txt [new file with mode: 0644]
MAINTAINERS
arch/mn10300/Kconfig [new file with mode: 0644]
arch/mn10300/Kconfig.debug [new file with mode: 0644]
arch/mn10300/Makefile [new file with mode: 0644]
arch/mn10300/boot/.gitignore [new file with mode: 0644]
arch/mn10300/boot/Makefile [new file with mode: 0644]
arch/mn10300/boot/compressed/Makefile [new file with mode: 0644]
arch/mn10300/boot/compressed/head.S [new file with mode: 0644]
arch/mn10300/boot/compressed/misc.c [new file with mode: 0644]
arch/mn10300/boot/compressed/misc.h [new file with mode: 0644]
arch/mn10300/boot/compressed/vmlinux.lds [new file with mode: 0644]
arch/mn10300/boot/install.sh [new file with mode: 0644]
arch/mn10300/boot/tools/build.c [new file with mode: 0644]
arch/mn10300/configs/asb2303_defconfig [new file with mode: 0644]
arch/mn10300/kernel/Makefile [new file with mode: 0644]
arch/mn10300/kernel/asm-offsets.c [new file with mode: 0644]
arch/mn10300/kernel/entry.S [new file with mode: 0644]
arch/mn10300/kernel/fpu-low.S [new file with mode: 0644]
arch/mn10300/kernel/fpu.c [new file with mode: 0644]
arch/mn10300/kernel/gdb-cache.S [new file with mode: 0644]
arch/mn10300/kernel/gdb-io-serial-low.S [new file with mode: 0644]
arch/mn10300/kernel/gdb-io-serial.c [new file with mode: 0644]
arch/mn10300/kernel/gdb-io-ttysm-low.S [new file with mode: 0644]
arch/mn10300/kernel/gdb-io-ttysm.c [new file with mode: 0644]
arch/mn10300/kernel/gdb-low.S [new file with mode: 0644]
arch/mn10300/kernel/gdb-stub.c [new file with mode: 0644]
arch/mn10300/kernel/head.S [new file with mode: 0644]
arch/mn10300/kernel/init_task.c [new file with mode: 0644]
arch/mn10300/kernel/internal.h [new file with mode: 0644]
arch/mn10300/kernel/io.c [new file with mode: 0644]
arch/mn10300/kernel/irq.c [new file with mode: 0644]
arch/mn10300/kernel/kernel_execve.S [new file with mode: 0644]
arch/mn10300/kernel/kprobes.c [new file with mode: 0644]
arch/mn10300/kernel/kthread.S [new file with mode: 0644]
arch/mn10300/kernel/mn10300-debug.c [new file with mode: 0644]
arch/mn10300/kernel/mn10300-serial-low.S [new file with mode: 0644]
arch/mn10300/kernel/mn10300-serial.c [new file with mode: 0644]
arch/mn10300/kernel/mn10300-serial.h [new file with mode: 0644]
arch/mn10300/kernel/mn10300-watchdog-low.S [new file with mode: 0644]
arch/mn10300/kernel/mn10300-watchdog.c [new file with mode: 0644]
arch/mn10300/kernel/mn10300_ksyms.c [new file with mode: 0644]
arch/mn10300/kernel/module.c [new file with mode: 0644]
arch/mn10300/kernel/process.c [new file with mode: 0644]
arch/mn10300/kernel/profile-low.S [new file with mode: 0644]
arch/mn10300/kernel/profile.c [new file with mode: 0644]
arch/mn10300/kernel/ptrace.c [new file with mode: 0644]
arch/mn10300/kernel/rtc.c [new file with mode: 0644]
arch/mn10300/kernel/semaphore.c [new file with mode: 0644]
arch/mn10300/kernel/setup.c [new file with mode: 0644]
arch/mn10300/kernel/sigframe.h [new file with mode: 0644]
arch/mn10300/kernel/signal.c [new file with mode: 0644]
arch/mn10300/kernel/switch_to.S [new file with mode: 0644]
arch/mn10300/kernel/sys_mn10300.c [new file with mode: 0644]
arch/mn10300/kernel/time.c [new file with mode: 0644]
arch/mn10300/kernel/traps.c [new file with mode: 0644]
arch/mn10300/kernel/vmlinux.lds.S [new file with mode: 0644]
arch/mn10300/lib/Makefile [new file with mode: 0644]
arch/mn10300/lib/__ashldi3.S [new file with mode: 0644]
arch/mn10300/lib/__ashrdi3.S [new file with mode: 0644]
arch/mn10300/lib/__lshrdi3.S [new file with mode: 0644]
arch/mn10300/lib/ashrdi3.c [new file with mode: 0644]
arch/mn10300/lib/bitops.c [new file with mode: 0644]
arch/mn10300/lib/checksum.c [new file with mode: 0644]
arch/mn10300/lib/delay.c [new file with mode: 0644]
arch/mn10300/lib/do_csum.S [new file with mode: 0644]
arch/mn10300/lib/internal.h [new file with mode: 0644]
arch/mn10300/lib/lshrdi3.c [new file with mode: 0644]
arch/mn10300/lib/memcpy.S [new file with mode: 0644]
arch/mn10300/lib/memmove.S [new file with mode: 0644]
arch/mn10300/lib/memset.S [new file with mode: 0644]
arch/mn10300/lib/negdi2.c [new file with mode: 0644]
arch/mn10300/lib/usercopy.c [new file with mode: 0644]
arch/mn10300/mm/Makefile [new file with mode: 0644]
arch/mn10300/mm/cache-flush-mn10300.S [new file with mode: 0644]
arch/mn10300/mm/cache-mn10300.S [new file with mode: 0644]
arch/mn10300/mm/cache.c [new file with mode: 0644]
arch/mn10300/mm/dma-alloc.c [new file with mode: 0644]
arch/mn10300/mm/extable.c [new file with mode: 0644]
arch/mn10300/mm/fault.c [new file with mode: 0644]
arch/mn10300/mm/init.c [new file with mode: 0644]
arch/mn10300/mm/misalignment.c [new file with mode: 0644]
arch/mn10300/mm/mmu-context.c [new file with mode: 0644]
arch/mn10300/mm/pgtable.c [new file with mode: 0644]
arch/mn10300/mm/tlb-mn10300.S [new file with mode: 0644]
arch/mn10300/oprofile/Kconfig [new file with mode: 0644]
arch/mn10300/oprofile/Makefile [new file with mode: 0644]
arch/mn10300/oprofile/op_model_null.c [new file with mode: 0644]
arch/mn10300/proc-mn103e010/Makefile [new file with mode: 0644]
arch/mn10300/proc-mn103e010/proc-init.c [new file with mode: 0644]
arch/mn10300/unit-asb2303/Makefile [new file with mode: 0644]
arch/mn10300/unit-asb2303/leds.c [new file with mode: 0644]
arch/mn10300/unit-asb2303/smc91111.c [new file with mode: 0644]
arch/mn10300/unit-asb2303/unit-init.c [new file with mode: 0644]
arch/mn10300/unit-asb2305/Makefile [new file with mode: 0644]
arch/mn10300/unit-asb2305/leds.c [new file with mode: 0644]
arch/mn10300/unit-asb2305/pci-asb2305.c [new file with mode: 0644]
arch/mn10300/unit-asb2305/pci-asb2305.h [new file with mode: 0644]
arch/mn10300/unit-asb2305/pci-iomap.c [new file with mode: 0644]
arch/mn10300/unit-asb2305/pci-irq.c [new file with mode: 0644]
arch/mn10300/unit-asb2305/pci.c [new file with mode: 0644]
arch/mn10300/unit-asb2305/unit-init.c [new file with mode: 0644]
drivers/input/joystick/analog.c
drivers/net/Kconfig
drivers/net/smc91x.h
drivers/parport/Kconfig
drivers/pci/Makefile
drivers/video/console/Kconfig
include/asm-mn10300/.gitignore [new file with mode: 0644]
include/asm-mn10300/Kbuild [new file with mode: 0644]
include/asm-mn10300/atomic.h [new file with mode: 0644]
include/asm-mn10300/auxvec.h [new file with mode: 0644]
include/asm-mn10300/bitops.h [new file with mode: 0644]
include/asm-mn10300/bug.h [new file with mode: 0644]
include/asm-mn10300/bugs.h [new file with mode: 0644]
include/asm-mn10300/busctl-regs.h [new file with mode: 0644]
include/asm-mn10300/byteorder.h [new file with mode: 0644]
include/asm-mn10300/cache.h [new file with mode: 0644]
include/asm-mn10300/cacheflush.h [new file with mode: 0644]
include/asm-mn10300/checksum.h [new file with mode: 0644]
include/asm-mn10300/cpu-regs.h [new file with mode: 0644]
include/asm-mn10300/cputime.h [new file with mode: 0644]
include/asm-mn10300/current.h [new file with mode: 0644]
include/asm-mn10300/delay.h [new file with mode: 0644]
include/asm-mn10300/device.h [new file with mode: 0644]
include/asm-mn10300/div64.h [new file with mode: 0644]
include/asm-mn10300/dma-mapping.h [new file with mode: 0644]
include/asm-mn10300/dma.h [new file with mode: 0644]
include/asm-mn10300/dmactl-regs.h [new file with mode: 0644]
include/asm-mn10300/elf.h [new file with mode: 0644]
include/asm-mn10300/emergency-restart.h [new file with mode: 0644]
include/asm-mn10300/errno.h [new file with mode: 0644]
include/asm-mn10300/exceptions.h [new file with mode: 0644]
include/asm-mn10300/fb.h [new file with mode: 0644]
include/asm-mn10300/fcntl.h [new file with mode: 0644]
include/asm-mn10300/fpu.h [new file with mode: 0644]
include/asm-mn10300/frame.inc [new file with mode: 0644]
include/asm-mn10300/futex.h [new file with mode: 0644]
include/asm-mn10300/gdb-stub.h [new file with mode: 0644]
include/asm-mn10300/hardirq.h [new file with mode: 0644]
include/asm-mn10300/highmem.h [new file with mode: 0644]
include/asm-mn10300/hw_irq.h [new file with mode: 0644]
include/asm-mn10300/ide.h [new file with mode: 0644]
include/asm-mn10300/intctl-regs.h [new file with mode: 0644]
include/asm-mn10300/io.h [new file with mode: 0644]
include/asm-mn10300/ioctl.h [new file with mode: 0644]
include/asm-mn10300/ioctls.h [new file with mode: 0644]
include/asm-mn10300/ipc.h [new file with mode: 0644]
include/asm-mn10300/ipcbuf.h [new file with mode: 0644]
include/asm-mn10300/irq.h [new file with mode: 0644]
include/asm-mn10300/irq_regs.h [new file with mode: 0644]
include/asm-mn10300/kdebug.h [new file with mode: 0644]
include/asm-mn10300/kmap_types.h [new file with mode: 0644]
include/asm-mn10300/kprobes.h [new file with mode: 0644]
include/asm-mn10300/linkage.h [new file with mode: 0644]
include/asm-mn10300/local.h [new file with mode: 0644]
include/asm-mn10300/mc146818rtc.h [new file with mode: 0644]
include/asm-mn10300/mman.h [new file with mode: 0644]
include/asm-mn10300/mmu.h [new file with mode: 0644]
include/asm-mn10300/mmu_context.h [new file with mode: 0644]
include/asm-mn10300/module.h [new file with mode: 0644]
include/asm-mn10300/msgbuf.h [new file with mode: 0644]
include/asm-mn10300/mutex.h [new file with mode: 0644]
include/asm-mn10300/namei.h [new file with mode: 0644]
include/asm-mn10300/nmi.h [new file with mode: 0644]
include/asm-mn10300/page.h [new file with mode: 0644]
include/asm-mn10300/page_offset.h [new file with mode: 0644]
include/asm-mn10300/param.h [new file with mode: 0644]
include/asm-mn10300/pci.h [new file with mode: 0644]
include/asm-mn10300/percpu.h [new file with mode: 0644]
include/asm-mn10300/pgalloc.h [new file with mode: 0644]
include/asm-mn10300/pgtable.h [new file with mode: 0644]
include/asm-mn10300/pio-regs.h [new file with mode: 0644]
include/asm-mn10300/poll.h [new file with mode: 0644]
include/asm-mn10300/posix_types.h [new file with mode: 0644]
include/asm-mn10300/proc-mn103e010/cache.h [new file with mode: 0644]
include/asm-mn10300/proc-mn103e010/clock.h [new file with mode: 0644]
include/asm-mn10300/proc-mn103e010/irq.h [new file with mode: 0644]
include/asm-mn10300/proc-mn103e010/proc.h [new file with mode: 0644]
include/asm-mn10300/processor.h [new file with mode: 0644]
include/asm-mn10300/ptrace.h [new file with mode: 0644]
include/asm-mn10300/reset-regs.h [new file with mode: 0644]
include/asm-mn10300/resource.h [new file with mode: 0644]
include/asm-mn10300/rtc-regs.h [new file with mode: 0644]
include/asm-mn10300/rtc.h [new file with mode: 0644]
include/asm-mn10300/scatterlist.h [new file with mode: 0644]
include/asm-mn10300/sections.h [new file with mode: 0644]
include/asm-mn10300/semaphore.h [new file with mode: 0644]
include/asm-mn10300/sembuf.h [new file with mode: 0644]
include/asm-mn10300/serial-regs.h [new file with mode: 0644]
include/asm-mn10300/serial.h [new file with mode: 0644]
include/asm-mn10300/setup.h [new file with mode: 0644]
include/asm-mn10300/shmbuf.h [new file with mode: 0644]
include/asm-mn10300/shmparam.h [new file with mode: 0644]
include/asm-mn10300/sigcontext.h [new file with mode: 0644]
include/asm-mn10300/siginfo.h [new file with mode: 0644]
include/asm-mn10300/signal.h [new file with mode: 0644]
include/asm-mn10300/smp.h [new file with mode: 0644]
include/asm-mn10300/socket.h [new file with mode: 0644]
include/asm-mn10300/sockios.h [new file with mode: 0644]
include/asm-mn10300/spinlock.h [new file with mode: 0644]
include/asm-mn10300/stat.h [new file with mode: 0644]
include/asm-mn10300/statfs.h [new file with mode: 0644]
include/asm-mn10300/string.h [new file with mode: 0644]
include/asm-mn10300/system.h [new file with mode: 0644]
include/asm-mn10300/termbits.h [new file with mode: 0644]
include/asm-mn10300/termios.h [new file with mode: 0644]
include/asm-mn10300/thread_info.h [new file with mode: 0644]
include/asm-mn10300/timer-regs.h [new file with mode: 0644]
include/asm-mn10300/timex.h [new file with mode: 0644]
include/asm-mn10300/tlb.h [new file with mode: 0644]
include/asm-mn10300/tlbflush.h [new file with mode: 0644]
include/asm-mn10300/topology.h [new file with mode: 0644]
include/asm-mn10300/types.h [new file with mode: 0644]
include/asm-mn10300/uaccess.h [new file with mode: 0644]
include/asm-mn10300/ucontext.h [new file with mode: 0644]
include/asm-mn10300/unaligned.h [new file with mode: 0644]
include/asm-mn10300/unistd.h [new file with mode: 0644]
include/asm-mn10300/unit-asb2303/clock.h [new file with mode: 0644]
include/asm-mn10300/unit-asb2303/leds.h [new file with mode: 0644]
include/asm-mn10300/unit-asb2303/serial.h [new file with mode: 0644]
include/asm-mn10300/unit-asb2303/smc91111.h [new file with mode: 0644]
include/asm-mn10300/unit-asb2303/timex.h [new file with mode: 0644]
include/asm-mn10300/unit-asb2305/clock.h [new file with mode: 0644]
include/asm-mn10300/unit-asb2305/leds.h [new file with mode: 0644]
include/asm-mn10300/unit-asb2305/serial.h [new file with mode: 0644]
include/asm-mn10300/unit-asb2305/timex.h [new file with mode: 0644]
include/asm-mn10300/user.h [new file with mode: 0644]
include/asm-mn10300/vga.h [new file with mode: 0644]
include/asm-mn10300/xor.h [new file with mode: 0644]
include/linux/elf-em.h
include/linux/kernel.h
lib/Kconfig.debug

diff --git a/Documentation/mn10300/ABI.txt b/Documentation/mn10300/ABI.txt
new file mode 100644 (file)
index 0000000..1fef1f0
--- /dev/null
@@ -0,0 +1,149 @@
+                          =========================
+                          MN10300 FUNCTION CALL ABI
+                          =========================
+
+=======
+GENERAL
+=======
+
+The MN10300/AM33 kernel runs in little-endian mode; big-endian mode is not
+supported.
+
+The stack grows downwards, and should always be 32-bit aligned. There are
+separate stack pointer registers for userspace and the kernel.
+
+
+================
+ARGUMENT PASSING
+================
+
+The first two arguments (assuming up to 32-bits per argument) to a function are
+passed in the D0 and D1 registers respectively; all other arguments are passed
+on the stack.
+
+If 64-bit arguments are being passed, then they are never split between
+registers and the stack. If the first argument is a 64-bit value, it will be
+passed in D0:D1. If the first argument is not a 64-bit value, but the second
+is, the second will be passed entirely on the stack and D1 will be unused.
+
+Arguments smaller than 32-bits are not coelesced within a register or a stack
+word. For example, two byte-sized arguments will always be passed in separate
+registers or word-sized stack slots.
+
+
+=================
+CALLING FUNCTIONS
+=================
+
+The caller must allocate twelve bytes on the stack for the callee's use before
+it inserts a CALL instruction. The CALL instruction will write into the TOS
+word, but won't actually modify the stack pointer; similarly, the RET
+instruction reads from the TOS word of the stack, but doesn't move the stack
+pointer beyond it.
+
+
+       Stack:
+       |               |
+       |               |
+       |---------------| SP+20
+       | 4th Arg       |
+       |---------------| SP+16
+       | 3rd Arg       |
+       |---------------| SP+12
+       | D1 Save Slot  |
+       |---------------| SP+8
+       | D0 Save Slot  |
+       |---------------| SP+4
+       | Return Addr   |
+       |---------------| SP
+       |               |
+       |               |
+
+
+The caller must leave space on the stack (hence an allocation of twelve bytes)
+in which the callee may store the first two arguments.
+
+
+============
+RETURN VALUE
+============
+
+The return value is passed in D0 for an integer (or D0:D1 for a 64-bit value),
+or A0 for a pointer.
+
+If the return value is a value larger than 64-bits, or is a structure or an
+array, then a hidden first argument will be passed to the callee by the caller:
+this will point to a piece of memory large enough to hold the result of the
+function. In this case, the callee will return the value in that piece of
+memory, and no value will be returned in D0 or A0.
+
+
+===================
+REGISTER CLOBBERING
+===================
+
+The values in certain registers may be clobbered by the callee, and other
+values must be saved:
+
+       Clobber:        D0-D1, A0-A1, E0-E3
+       Save:           D2-D3, A2-A3, E4-E7, SP
+
+All other non-supervisor-only registers are clobberable (such as MDR, MCRL,
+MCRH).
+
+
+=================
+SPECIAL REGISTERS
+=================
+
+Certain ordinary registers may carry special usage for the compiler:
+
+       A3:     Frame pointer
+       E2:     TLS pointer
+
+
+==========
+KERNEL ABI
+==========
+
+The kernel may use a slightly different ABI internally.
+
+ (*) E2
+
+     If CONFIG_MN10300_CURRENT_IN_E2 is defined, then the current task pointer
+     will be kept in the E2 register, and that register will be marked
+     unavailable for the compiler to use as a scratch register.
+
+     Normally the kernel uses something like:
+
+       MOV     SP,An
+       AND     0xFFFFE000,An
+       MOV     (An),Rm         // Rm holds current
+       MOV     (yyy,Rm)        // Access current->yyy
+
+     To find the address of current; but since this option permits current to
+     be carried globally in an register, it can use:
+
+       MOV     (yyy,E2)        // Access current->yyy
+
+     instead.
+
+
+===============
+SYSTEM CALL ABI
+===============
+
+System calls are called with the following convention:
+
+       REGISTER        ENTRY                   EXIT
+       =============== ======================= =======================
+       D0              Syscall number          Return value
+       A0              1st syscall argument    Saved
+       D1              2nd syscall argument    Saved
+       A3              3rd syscall argument    Saved
+       A2              4th syscall argument    Saved
+       D3              5th syscall argument    Saved
+       D2              6th syscall argument    Saved
+
+All other registers are saved.  The layout is a consequence of the way the MOVM
+instruction stores registers onto the stack.
diff --git a/Documentation/mn10300/compartmentalisation.txt b/Documentation/mn10300/compartmentalisation.txt
new file mode 100644 (file)
index 0000000..8958b51
--- /dev/null
@@ -0,0 +1,60 @@
+                  =========================================
+                  PART-SPECIFIC SOURCE COMPARTMENTALISATION
+                  =========================================
+
+The sources for various parts are compartmentalised at two different levels:
+
+ (1) Processor level
+
+     The "processor level" is a CPU core plus the other on-silicon
+     peripherals.
+
+     Processor-specific header files are divided among directories in a similar
+     way to the CPU level:
+
+       (*) include/asm-mn10300/proc-mn103e010/
+
+           Support for the AM33v2 CPU core.
+
+     The appropriate processor is selected by a CONFIG_MN10300_PROC_YYYY option
+     from the "Processor support" choice menu in the arch/mn10300/Kconfig file.
+
+
+ (2) Unit level
+
+     The "unit level" is a processor plus all the external peripherals
+     controlled by that processor.
+
+     Unit-specific header files are divided among directories in a similar way
+     to the CPU level; not only that, but specific sources may also be
+     segregated into separate directories under the arch directory:
+
+       (*) include/asm-mn10300/unit-asb2303/
+       (*) arch/mn10300/unit-asb2303/
+
+           Support for the ASB2303 board with an ASB2308 daughter board.
+
+       (*) include/asm-mn10300/unit-asb2305/
+       (*) arch/mn10300/unit-asb2305/
+
+           Support for the ASB2305 board.
+
+     The appropriate processor is selected by a CONFIG_MN10300_UNIT_ZZZZ option
+     from the "Unit type" choice menu in the arch/mn10300/Kconfig file.
+
+
+============
+COMPILE TIME
+============
+
+When the kernel is compiled, symbolic links will be made in the asm header file
+directory for this arch:
+
+       include/asm-mn10300/proc => include/asm-mn10300/proc-YYYY/
+       include/asm-mn10300/unit => include/asm-mn10300/unit-ZZZZ/
+
+So that the header files contained in those directories can be accessed without
+lots of #ifdef-age.
+
+The appropriate arch/mn10300/unit-ZZZZ directory will also be entered by the
+compilation process; all other unit-specific directories will be ignored.
index 2cdb591ac0807d6b5b1b6f10702ad5542c91f29f..a7e6ef3dae165e4d886f7114f66ca46ef7fcc8c5 100644 (file)
@@ -2614,6 +2614,15 @@ L:       linux-kernel@vger.kernel.org
 W:     http://www.linux-mm.org
 S:     Maintained
 
+MEI MN10300/AM33 PORT
+P:     David Howells
+M:     dhowells@redhat.com
+P:     Koichi Yasutake
+M:     yasutake.koichi@jp.panasonic.com
+L:     linux-am33-list@redhat.com
+W:     ftp://ftp.redhat.com/pub/redhat/gnupro/AM33/
+S:     Maintained
+
 MEMORY TECHNOLOGY DEVICES (MTD)
 P:     David Woodhouse
 M:     dwmw2@infradead.org
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
new file mode 100644 (file)
index 0000000..eedc3a5
--- /dev/null
@@ -0,0 +1,381 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "Linux Kernel Configuration"
+
+config MN10300
+       def_bool y
+
+config AM33
+       def_bool y
+
+config MMU
+       def_bool y
+
+config HIGHMEM
+       def_bool n
+
+config NUMA
+       def_bool n
+
+config UID16
+       def_bool y
+
+config RWSEM_GENERIC_SPINLOCK
+       def_bool y
+
+config RWSEM_XCHGADD_ALGORITHM
+       bool
+
+config GENERIC_HARDIRQS_NO__DO_IRQ
+       def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+       def_bool y
+
+config GENERIC_FIND_NEXT_BIT
+       def_bool y
+
+config GENERIC_HWEIGHT
+       def_bool y
+
+config GENERIC_TIME
+       def_bool y
+
+config GENERIC_BUG
+       def_bool y
+
+config QUICKLIST
+       def_bool y
+
+config ARCH_HAS_ILOG2_U32
+       def_bool y
+
+config ARCH_SUPPORTS_AOUT
+       def_bool n
+
+# Use the generic interrupt handling code in kernel/irq/
+config GENERIC_HARDIRQS
+       def_bool y
+
+config HOTPLUG_CPU
+       def_bool n
+
+mainmenu "Matsushita MN10300/AM33 Kernel Configuration"
+
+source "init/Kconfig"
+
+
+menu "Matsushita MN10300 system setup"
+
+choice
+       prompt "Unit type"
+       default MN10300_UNIT_ASB2303
+       help
+         This option specifies board for which the kernel will be
+         compiled. It affects the external peripherals catered for.
+
+config MN10300_UNIT_ASB2303
+       bool "ASB2303"
+
+config MN10300_UNIT_ASB2305
+       bool "ASB2305"
+
+endchoice
+
+choice
+       prompt "Processor support"
+       default MN10300_PROC_MN103E010
+       help
+         This option specifies the processor for which the kernel will be
+         compiled. It affects the on-chip peripherals catered for.
+
+config MN10300_PROC_MN103E010
+       bool "MN103E010"
+       depends on MN10300_UNIT_ASB2303 || MN10300_UNIT_ASB2305
+       select MN10300_PROC_HAS_TTYSM0
+       select MN10300_PROC_HAS_TTYSM1
+       select MN10300_PROC_HAS_TTYSM2
+
+endchoice
+
+choice
+       prompt "Processor core support"
+       default MN10300_CPU_AM33V2
+       help
+         This option specifies the processor core for which the kernel will be
+         compiled. It affects the instruction set used.
+
+config MN10300_CPU_AM33V2
+       bool "AM33v2"
+
+endchoice
+
+config FPU
+       bool "FPU present"
+       default y
+       depends on MN10300_PROC_MN103E010
+
+choice
+       prompt "CPU Caching mode"
+       default MN10300_CACHE_WBACK
+       help
+         This option determines the caching mode for the kernel.
+
+         Write-Back caching mode involves the all reads and writes causing
+         the affected cacheline to be read into the cache first before being
+         operated upon. Memory is not then updated by a write until the cache
+         is filled and a cacheline needs to be displaced from the cache to
+         make room. Only at that point is it written back.
+
+         Write-Through caching only fetches cachelines from memory on a
+         read. Writes always get written directly to memory. If the affected
+         cacheline is also in cache, it will be updated too.
+
+         The final option is to turn of caching entirely.
+
+config MN10300_CACHE_WBACK
+       bool "Write-Back"
+
+config MN10300_CACHE_WTHRU
+       bool "Write-Through"
+
+config MN10300_CACHE_DISABLED
+       bool "Disabled"
+
+endchoice
+
+menu "Memory layout options"
+
+config KERNEL_RAM_BASE_ADDRESS
+       hex "Base address of kernel RAM"
+       default "0x90000000"
+
+config INTERRUPT_VECTOR_BASE
+       hex "Base address of vector table"
+       default "0x90000000"
+       help
+         The base address of the vector table will be programmed into
+          the TBR register. It must be on 16MiB address boundary.
+
+config KERNEL_TEXT_ADDRESS
+       hex "Base address of kernel"
+       default "0x90001000"
+
+config KERNEL_ZIMAGE_BASE_ADDRESS
+       hex "Base address of compressed vmlinux image"
+       default "0x90700000"
+
+endmenu
+
+config PREEMPT
+       bool "Preemptible Kernel"
+       help
+         This option reduces the latency of the kernel when reacting to
+         real-time or interactive events by allowing a low priority process to
+         be preempted even if it is in kernel mode executing a system call.
+         This allows applications to run more reliably even when the system is
+         under load.
+
+         Say Y here if you are building a kernel for a desktop, embedded
+         or real-time system.  Say N if you are unsure.
+
+config PREEMPT_BKL
+       bool "Preempt The Big Kernel Lock"
+       depends on PREEMPT
+       default y
+       help
+         This option reduces the latency of the kernel by making the
+         big kernel lock preemptible.
+
+         Say Y here if you are building a kernel for a desktop system.
+         Say N if you are unsure.
+
+config MN10300_CURRENT_IN_E2
+       bool "Hold current task address in E2 register"
+       default y
+       help
+         This option removes the E2/R2 register from the set available to gcc
+         for normal use and instead uses it to store the address of the
+         current process's task_struct whilst in the kernel.
+
+         This means the kernel doesn't need to calculate the address each time
+         "current" is used (take SP, AND with mask and dereference pointer
+         just to get the address), and instead can just use E2+offset
+         addressing each time.
+
+         This has no effect on userspace.
+
+config MN10300_USING_JTAG
+       bool "Using JTAG to debug kernel"
+       default y
+       help
+         This options indicates that JTAG will be used to debug the kernel. It
+         suppresses the use of certain hardware debugging features, such as
+         single-stepping, which are taken over completely by the JTAG unit.
+
+config MN10300_RTC
+       bool "Using MN10300 RTC"
+       depends on MN10300_PROC_MN103E010
+       default n
+       help
+
+         This option enables support for the RTC, thus enabling time to be
+         tracked, even when system is powered down. This is available on-chip
+         on the MN103E010.
+
+config MN10300_WD_TIMER
+       bool "Using MN10300 watchdog timer"
+       default y
+       help
+         This options indicates that the watchdog timer will be used.
+
+config PCI
+       bool "Use PCI"
+       depends on MN10300_UNIT_ASB2305
+       default y
+       help
+         Some systems (such as the ASB2305) have PCI onboard. If you have one
+         of these boards and you wish to use the PCI facilities, say Y here.
+
+         The PCI-HOWTO, available from
+         <http://www.tldp.org/docs.html#howto>, contains valuable
+         information about which PCI hardware does work under Linux and which
+         doesn't.
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+menu "MN10300 internal serial options"
+
+config MN10300_PROC_HAS_TTYSM0
+       bool
+       default n
+
+config MN10300_PROC_HAS_TTYSM1
+       bool
+       default n
+
+config MN10300_PROC_HAS_TTYSM2
+       bool
+       default n
+
+config MN10300_TTYSM
+       bool "Support for ttySM serial ports"
+       depends on MN10300
+       default y
+       select SERIAL_CORE
+       help
+         This option enables support for the on-chip serial ports that the
+         MN10300 has available.
+
+config MN10300_TTYSM_CONSOLE
+       bool "Support for console on ttySM serial ports"
+       depends on MN10300_TTYSM
+       select SERIAL_CORE_CONSOLE
+       help
+         This option enables support for a console on the on-chip serial ports
+         that the MN10300 has available.
+
+#
+# /dev/ttySM0
+#
+config MN10300_TTYSM0
+       bool "Enable SIF0 (/dev/ttySM0)"
+       depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM0
+       help
+         Enable access to SIF0 through /dev/ttySM0 or gdb-stub
+
+choice
+       prompt "Select the timer to supply the clock for SIF0"
+       default MN10300_TTYSM0_TIMER8
+       depends on MN10300_TTYSM0
+
+config MN10300_TTYSM0_TIMER8
+       bool "Use timer 8 (16-bit)"
+
+config MN10300_TTYSM0_TIMER2
+       bool "Use timer 2 (8-bit)"
+
+endchoice
+
+#
+# /dev/ttySM1
+#
+config MN10300_TTYSM1
+       bool "Enable SIF1 (/dev/ttySM1)"
+       depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM1
+       help
+         Enable access to SIF1 through /dev/ttySM1 or gdb-stub
+
+choice
+       prompt "Select the timer to supply the clock for SIF1"
+       default MN10300_TTYSM0_TIMER9
+       depends on MN10300_TTYSM1
+
+config MN10300_TTYSM1_TIMER9
+       bool "Use timer 9 (16-bit)"
+
+config MN10300_TTYSM1_TIMER3
+       bool "Use timer 3 (8-bit)"
+
+endchoice
+
+#
+# /dev/ttySM2
+#
+config MN10300_TTYSM2
+       bool "Enable SIF2 (/dev/ttySM2)"
+       depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM2
+       help
+         Enable access to SIF2 through /dev/ttySM2 or gdb-stub
+
+choice
+       prompt "Select the timer to supply the clock for SIF2"
+       default MN10300_TTYSM0_TIMER10
+       depends on MN10300_TTYSM2
+
+config MN10300_TTYSM2_TIMER10
+       bool "Use timer 10 (16-bit)"
+
+endchoice
+
+config MN10300_TTYSM2_CTS
+       bool "Enable the use of the CTS line /dev/ttySM2"
+       depends on MN10300_TTYSM2
+
+endmenu
+
+source "mm/Kconfig"
+
+menu "Power management options"
+source kernel/power/Kconfig
+endmenu
+
+endmenu
+
+
+menu "Executable formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/mn10300/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
+
+source "arch/mn10300/oprofile/Kconfig"
diff --git a/arch/mn10300/Kconfig.debug b/arch/mn10300/Kconfig.debug
new file mode 100644 (file)
index 0000000..524e338
--- /dev/null
@@ -0,0 +1,135 @@
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config DEBUG_STACKOVERFLOW
+       bool "Check for stack overflows"
+       depends on DEBUG_KERNEL
+
+config DEBUG_DECOMPRESS_KERNEL
+       bool "Using serial port during decompressing kernel"
+       depends on DEBUG_KERNEL
+       default n
+       help
+         If you say Y here you will confirm the start and the end of
+         decompressing Linux seeing "Uncompressing Linux... " and
+         "Ok, booting the kernel.\n" on console.
+
+config KPROBES
+       bool "Kprobes"
+       depends on DEBUG_KERNEL
+       help
+         Kprobes allows you to trap at almost any kernel address and
+         execute a callback function.  register_kprobe() establishes
+         a probepoint and specifies the callback.  Kprobes is useful
+         for kernel debugging, non-intrusive instrumentation and testing.
+         If in doubt, say "N".
+
+config GDBSTUB
+       bool "Remote GDB kernel debugging"
+       depends on DEBUG_KERNEL
+       select DEBUG_INFO
+       select FRAME_POINTER
+       help
+         If you say Y here, it will be possible to remotely debug the kernel
+         using gdb. This enlarges your kernel ELF image disk size by several
+         megabytes and requires a machine with more than 16 MB, better 32 MB
+         RAM to avoid excessive linking time. This is only useful for kernel
+         hackers. If unsure, say N.
+
+config GDBSTUB_IMMEDIATE
+       bool "Break into GDB stub immediately"
+       depends on GDBSTUB
+       help
+         If you say Y here, GDB stub will break into the program as soon as
+         possible, leaving the program counter at the beginning of
+         start_kernel() in init/main.c.
+
+config GDB_CONSOLE
+       bool "Console output to GDB"
+       depends on GDBSTUB
+       help
+         If you are using GDB for remote debugging over a serial port and
+         would like kernel messages to be formatted into GDB $O packets so
+         that GDB prints them as program output, say 'Y'.
+
+config GDBSTUB_DEBUGGING
+       bool "Debug GDB stub by messages to serial port"
+       depends on GDBSTUB
+       help
+         This causes debugging messages to be displayed at various points
+         during execution of the GDB stub routines. Such messages will be
+         displayed on ttyS0 if that isn't the GDB stub's port, or ttySM0
+         otherwise.
+
+config GDBSTUB_DEBUG_ENTRY
+       bool "Debug GDB stub entry"
+       depends on GDBSTUB_DEBUGGING
+       help
+         This option causes information to be displayed about entry to or exit
+         from the main GDB stub routine.
+
+config GDBSTUB_DEBUG_PROTOCOL
+       bool "Debug GDB stub protocol"
+       depends on GDBSTUB_DEBUGGING
+       help
+         This option causes information to be displayed about the GDB remote
+         protocol messages generated exchanged with GDB.
+
+config GDBSTUB_DEBUG_IO
+       bool "Debug GDB stub I/O"
+       depends on GDBSTUB_DEBUGGING
+       help
+         This option causes information to be displayed about GDB stub's
+         low-level I/O.
+
+config GDBSTUB_DEBUG_BREAKPOINT
+       bool "Debug GDB stub breakpoint management"
+       depends on GDBSTUB_DEBUGGING
+       help
+         This option causes information to be displayed about GDB stub's
+         breakpoint management.
+
+choice
+       prompt "GDB stub port"
+       default GDBSTUB_TTYSM0
+       depends on GDBSTUB
+       help
+         Select the serial port used for GDB-stub.
+
+config GDBSTUB_ON_TTYSM0
+       bool "/dev/ttySM0 [SIF0]"
+       depends on MN10300_TTYSM0
+       select GDBSTUB_ON_TTYSMx
+
+config GDBSTUB_ON_TTYSM1
+       bool "/dev/ttySM1 [SIF1]"
+       depends on MN10300_TTYSM1
+       select GDBSTUB_ON_TTYSMx
+
+config GDBSTUB_ON_TTYSM2
+       bool "/dev/ttySM2 [SIF2]"
+       depends on MN10300_TTYSM2
+       select GDBSTUB_ON_TTYSMx
+
+config GDBSTUB_ON_TTYS0
+       bool "/dev/ttyS0"
+       select GDBSTUB_ON_TTYSx
+
+config GDBSTUB_ON_TTYS1
+       bool "/dev/ttyS1"
+       select GDBSTUB_ON_TTYSx
+
+endchoice
+
+config GDBSTUB_ON_TTYSMx
+       bool
+       depends on GDBSTUB_ON_TTYSM0 || GDBSTUB_ON_TTYSM1 || GDBSTUB_ON_TTYSM2
+       default y
+
+config GDBSTUB_ON_TTYSx
+       bool
+       depends on GDBSTUB_ON_TTYS0 || GDBSTUB_ON_TTYS1
+       default y
+
+endmenu
diff --git a/arch/mn10300/Makefile b/arch/mn10300/Makefile
new file mode 100644 (file)
index 0000000..6673a28
--- /dev/null
@@ -0,0 +1,135 @@
+###############################################################################
+#
+# MN10300 Kernel makefile system specifications
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Modified by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+
+KBUILD_DEFCONFIG := asb2303_defconfig
+
+CCSPECS        := $(shell $(CC) -v 2>&1 | grep "^Reading specs from " | head -1 | cut -c20-)
+CCDIR  := $(strip $(patsubst %/specs,%,$(CCSPECS)))
+KBUILD_CPPFLAGS += -nostdinc -I$(CCDIR)/include
+
+LDFLAGS                :=
+OBJCOPYFLAGS   := -O binary -R .note -R .comment -S
+#LDFLAGS_vmlinux := -Map linkmap.txt
+CHECKFLAGS     +=
+
+PROCESSOR      := unset
+UNIT           := unset
+
+KBUILD_CFLAGS  += -mam33 -mmem-funcs -DCPU=AM33
+KBUILD_AFLAGS  += -mam33 -DCPU=AM33
+
+ifeq ($(CONFIG_MN10300_CURRENT_IN_E2),y)
+KBUILD_CFLAGS  += -ffixed-e2 -fcall-saved-e5
+endif
+
+ifeq ($(CONFIG_MN10300_PROC_MN103E010),y)
+PROCESSOR      := mn103e010
+endif
+
+ifeq ($(CONFIG_MN10300_UNIT_ASB2303),y)
+UNIT           := asb2303
+endif
+ifeq ($(CONFIG_MN10300_UNIT_ASB2305),y)
+UNIT           := asb2305
+endif
+
+
+head-y         := arch/mn10300/kernel/head.o arch/mn10300/kernel/init_task.o
+
+core-y         += arch/mn10300/kernel/ arch/mn10300/mm/
+
+ifneq ($(PROCESSOR),unset)
+core-y         += arch/mn10300/proc-$(PROCESSOR)/
+endif
+ifneq ($(UNIT),unset)
+core-y         += arch/mn10300/unit-$(UNIT)/
+endif
+libs-y         += arch/mn10300/lib/
+
+drivers-$(CONFIG_OPROFILE)     += arch/mn10300/oprofile/
+
+boot := arch/mn10300/boot
+
+.PHONY: zImage
+
+KBUILD_IMAGE := $(boot)/zImage
+CLEAN_FILES += $(boot)/zImage
+CLEAN_FILES += $(boot)/compressed/vmlinux
+CLEAN_FILES += $(boot)/compressed/vmlinux.bin
+CLEAN_FILES += $(boot)/compressed/vmlinux.bin.gz
+
+zImage: vmlinux
+       $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+all: zImage
+
+bootstrap:
+       $(Q)$(MAKEBOOT) bootstrap
+
+archclean:
+       $(Q)$(MAKE) $(clean)=arch/mn10300/proc-mn103e010
+       $(Q)$(MAKE) $(clean)=arch/mn10300/unit-asb2303
+       $(Q)$(MAKE) $(clean)=arch/mn10300/unit-asb2305
+
+define archhelp
+  echo  '* zImage        - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
+endef
+
+# If you make sure the .S files get compiled with debug info,
+# uncomment the following to disable optimisations
+# that are unhelpful whilst debugging.
+ifdef CONFIG_DEBUG_INFO
+#KBUILD_CFLAGS += -O1
+KBUILD_AFLAGS  += -Wa,--gdwarf2
+endif
+
+###################################################################################################
+#
+# juggle some symlinks in the MN10300 asm include dir
+#
+#      Update machine proc and unit symlinks if something which affects
+#      them changed.  We use .proc / .unit to indicate when they were
+#      updated last, otherwise make uses the target directory mtime.
+#
+###################################################################################################
+
+# processor specific definitions
+include/asm-mn10300/.proc: $(wildcard include/config/proc/*.h) include/config/auto.conf
+       @echo '  SYMLINK include/asm-mn10300/proc -> include/asm-mn10300/proc-$(PROCESSOR)'
+ifneq ($(KBUILD_SRC),)
+       $(Q)mkdir -p include/asm-mn10300
+       $(Q)ln -fsn $(srctree)/include/asm-mn10300/proc-$(PROCESSOR) include/asm-mn10300/proc
+else
+       $(Q)ln -fsn proc-$(PROCESSOR) include/asm-mn10300/proc
+endif
+       @touch $@
+
+CLEAN_FILES += include/asm-mn10300/proc include/asm-mn10300/.proc
+
+prepare: include/asm-mn10300/.proc
+
+# unit specific definitions
+include/asm-mn10300/.unit: $(wildcard include/config/unit/*.h) include/config/auto.conf
+       @echo '  SYMLINK include/asm-mn10300/unit -> include/asm-mn10300/unit-$(UNIT)'
+ifneq ($(KBUILD_SRC),)
+       $(Q)mkdir -p include/asm-mn10300
+       $(Q)ln -fsn $(srctree)/include/asm-mn10300/unit-$(UNIT) include/asm-mn10300/unit
+else
+       $(Q)ln -fsn unit-$(UNIT) include/asm-mn10300/unit
+endif
+       @touch $@
+
+CLEAN_FILES += include/asm-mn10300/unit include/asm-mn10300/.unit
+
+prepare: include/asm-mn10300/.unit
diff --git a/arch/mn10300/boot/.gitignore b/arch/mn10300/boot/.gitignore
new file mode 100644 (file)
index 0000000..b6718de
--- /dev/null
@@ -0,0 +1 @@
+zImage
diff --git a/arch/mn10300/boot/Makefile b/arch/mn10300/boot/Makefile
new file mode 100644 (file)
index 0000000..36c9caf
--- /dev/null
@@ -0,0 +1,28 @@
+# MN10300 kernel compressor and wrapper
+#
+# Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+
+targets                := vmlinux.bin zImage
+
+subdir-        := compressed
+
+# ---------------------------------------------------------------------------
+
+
+$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
+       $(call if_changed,objcopy)
+       @echo 'Kernel: $@ is ready'
+
+$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
+       $(call if_changed,objcopy)
+
+$(obj)/compressed/vmlinux: FORCE
+       $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
diff --git a/arch/mn10300/boot/compressed/Makefile b/arch/mn10300/boot/compressed/Makefile
new file mode 100644 (file)
index 0000000..08a95e1
--- /dev/null
@@ -0,0 +1,22 @@
+#
+# Create a compressed vmlinux image from the original vmlinux
+#
+
+targets                := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
+
+LDFLAGS_vmlinux := -Ttext $(CONFIG_KERNEL_ZIMAGE_BASE_ADDRESS) -e startup_32
+
+$(obj)/vmlinux: $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE
+       $(call if_changed,ld)
+       @:
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+       $(call if_changed,objcopy)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+       $(call if_changed,gzip)
+
+LDFLAGS_piggy.o := -r --format binary --oformat elf32-am33lin -T
+
+$(obj)/piggy.o: $(obj)/vmlinux.lds $(obj)/vmlinux.bin.gz FORCE
+       $(call if_changed,ld)
diff --git a/arch/mn10300/boot/compressed/head.S b/arch/mn10300/boot/compressed/head.S
new file mode 100644 (file)
index 0000000..502e1eb
--- /dev/null
@@ -0,0 +1,86 @@
+/* Boot entry point for a compressed MN10300 kernel
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+       .section        .text
+
+#define DEBUG
+
+#include <linux/linkage.h>
+#include <asm/cpu-regs.h>
+
+       .globl startup_32
+startup_32:
+       # first save off parameters from bootloader
+       mov     param_save_area,a0
+       mov     d0,(a0)
+       mov     d1,(4,a0)
+       mov     d2,(8,a0)
+
+       mov     sp,a3
+       mov     decomp_stack+0x2000-4,a0
+       mov     a0,sp
+
+       # invalidate and enable both of the caches
+       mov     CHCTR,a0
+       clr     d0
+       movhu   d0,(a0)                                 # turn off first
+       mov     CHCTR_ICINV|CHCTR_DCINV,d0
+       movhu   d0,(a0)
+       setlb
+       mov     (a0),d0
+       btst    CHCTR_ICBUSY|CHCTR_DCBUSY,d0            # wait till not busy
+       lne
+       mov     CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD,d0   # writethru dcache
+       movhu   d0,(a0)                                 # enable
+
+       # clear the BSS area
+       mov     __bss_start,a0
+       mov     _end,a1
+       clr     d0
+bssclear:
+       cmp     a1,a0
+       bge     bssclear_end
+       movbu   d0,(a0)
+       inc     a0
+       bra     bssclear
+bssclear_end:
+
+       # decompress the kernel
+       call    decompress_kernel[],0
+
+       # disable caches again
+       mov     CHCTR,a0
+       clr     d0
+       movhu   d0,(a0)
+       setlb
+       mov     (a0),d0
+       btst    CHCTR_ICBUSY|CHCTR_DCBUSY,d0            # wait till not busy
+       lne
+
+       mov     param_save_area,a0
+       mov     (a0),d0
+       mov     (4,a0),d1
+       mov     (8,a0),d2
+
+       mov     a3,sp
+       mov     CONFIG_KERNEL_TEXT_ADDRESS,a0
+       jmp     (a0)
+
+       .data
+       .align          4
+param_save_area:
+       .rept 3
+       .word           0
+       .endr
+
+       .section        .bss
+       .align          4
+decomp_stack:
+       .space          0x2000
diff --git a/arch/mn10300/boot/compressed/misc.c b/arch/mn10300/boot/compressed/misc.c
new file mode 100644 (file)
index 0000000..ded207e
--- /dev/null
@@ -0,0 +1,429 @@
+/* MN10300 Miscellaneous helper routines for kernel decompressor
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ * - Derived from arch/x86/boot/compressed/misc_32.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/compiler.h>
+#include <asm/serial-regs.h>
+#include "misc.h"
+
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+/* display 'Uncompressing Linux... ' messages on ttyS0 or ttyS1 */
+#if 1  /* ttyS0 */
+#define CYG_DEV_BASE   0xA6FB0000
+#else   /* ttyS1 */
+#define CYG_DEV_BASE   0xA6FC0000
+#endif
+
+#define CYG_DEV_THR    (*((volatile __u8*)(CYG_DEV_BASE + 0x00)))
+#define CYG_DEV_MCR    (*((volatile __u8*)(CYG_DEV_BASE + 0x10)))
+#define SIO_MCR_DTR    0x01
+#define SIO_MCR_RTS    0x02
+#define CYG_DEV_LSR    (*((volatile __u8*)(CYG_DEV_BASE + 0x14)))
+#define SIO_LSR_THRE   0x20            /* transmitter holding register empty */
+#define SIO_LSR_TEMT   0x40            /* transmitter register empty */
+#define CYG_DEV_MSR    (*((volatile __u8*)(CYG_DEV_BASE + 0x18)))
+#define SIO_MSR_CTS    0x10            /* clear to send */
+#define SIO_MSR_DSR    0x20            /* data set ready */
+
+#define LSR_WAIT_FOR(STATE) \
+       do { while (!(CYG_DEV_LSR & SIO_LSR_##STATE)) {} } while (0)
+#define FLOWCTL_QUERY(LINE) \
+       ({ CYG_DEV_MSR & SIO_MSR_##LINE; })
+#define FLOWCTL_WAIT_FOR(LINE) \
+       do { while (!(CYG_DEV_MSR & SIO_MSR_##LINE)) {} } while (0)
+#define FLOWCTL_CLEAR(LINE) \
+       do { CYG_DEV_MCR &= ~SIO_MCR_##LINE; } while (0)
+#define FLOWCTL_SET(LINE) \
+       do { CYG_DEV_MCR |= SIO_MCR_##LINE; } while (0)
+#endif
+
+/*
+ * gzip declarations
+ */
+
+#define OF(args)  args
+#define STATIC static
+
+#undef memset
+#undef memcpy
+
+static inline void *memset(const void *s, int c, size_t n)
+{
+       int i;
+       char *ss = (char *) s;
+
+       for (i = 0; i < n; i++)
+               ss[i] = c;
+       return (void *)s;
+}
+
+#define memzero(s, n) memset((s), 0, (n))
+
+static inline void *memcpy(void *__dest, const void *__src, size_t __n)
+{
+       int i;
+       const char *s = __src;
+       char *d = __dest;
+
+       for (i = 0; i < __n; i++)
+               d[i] = s[i];
+       return __dest;
+}
+
+typedef unsigned char  uch;
+typedef unsigned short ush;
+typedef unsigned long  ulg;
+
+#define WSIZE 0x8000   /* Window size must be at least 32k, and a power of
+                        * two */
+
+static uch *inbuf;     /* input buffer */
+static uch window[WSIZE]; /* sliding window buffer */
+
+static unsigned insize;        /* valid bytes in inbuf */
+static unsigned inptr; /* index of next byte to be processed in inbuf */
+static unsigned outcnt;        /* bytes in output buffer */
+
+/* gzip flag byte */
+#define ASCII_FLAG   0x01 /* bit 0 set: file probably ASCII text */
+#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
+#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
+#define COMMENT      0x10 /* bit 4 set: file comment present */
+#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
+#define RESERVED     0xC0 /* bit 6,7:   reserved */
+
+/* Diagnostic functions */
+#ifdef DEBUG
+#  define Assert(cond, msg) { if (!(cond)) error(msg); }
+#  define Trace(x)     fprintf x
+#  define Tracev(x)    { if (verbose) fprintf x ; }
+#  define Tracevv(x)   { if (verbose > 1) fprintf x ; }
+#  define Tracec(c, x) { if (verbose && (c)) fprintf x ; }
+#  define Tracecv(c, x)        { if (verbose > 1 && (c)) fprintf x ; }
+#else
+#  define Assert(cond, msg)
+#  define Trace(x)
+#  define Tracev(x)
+#  define Tracevv(x)
+#  define Tracec(c, x)
+#  define Tracecv(c, x)
+#endif
+
+static int  fill_inbuf(void);
+static void flush_window(void);
+static void error(const char *) __attribute__((noreturn));
+static void kputs(const char *);
+
+static inline unsigned char get_byte(void)
+{
+       unsigned char ch = inptr < insize ? inbuf[inptr++] : fill_inbuf();
+
+#if 0
+       char hex[3];
+       hex[0] = ((ch & 0x0f) > 9) ?
+               ((ch & 0x0f) + 'A' - 0xa) : ((ch & 0x0f) + '0');
+       hex[1] = ((ch >> 4) > 9) ?
+               ((ch >> 4) + 'A' - 0xa) : ((ch >> 4) + '0');
+       hex[2] = 0;
+       kputs(hex);
+#endif
+       return ch;
+}
+
+/*
+ * This is set up by the setup-routine at boot-time
+ */
+#define EXT_MEM_K (*(unsigned short *)0x90002)
+#ifndef STANDARD_MEMORY_BIOS_CALL
+#define ALT_MEM_K (*(unsigned long *) 0x901e0)
+#endif
+#define SCREEN_INFO (*(struct screen_info *)0x90000)
+
+static long bytes_out;
+static uch *output_data;
+static unsigned long output_ptr;
+
+
+static void *malloc(int size);
+
+static inline void free(void *where)
+{      /* Don't care */
+}
+
+static unsigned long free_mem_ptr = (unsigned long) &end;
+static unsigned long free_mem_end_ptr = (unsigned long) &end + 0x90000;
+
+static inline void gzip_mark(void **ptr)
+{
+       kputs(".");
+       *ptr = (void *) free_mem_ptr;
+}
+
+static inline void gzip_release(void **ptr)
+{
+       free_mem_ptr = (unsigned long) *ptr;
+}
+
+#define INPLACE_MOVE_ROUTINE   0x1000
+#define LOW_BUFFER_START       0x2000
+#define LOW_BUFFER_END         0x90000
+#define LOW_BUFFER_SIZE                (LOW_BUFFER_END - LOW_BUFFER_START)
+#define HEAP_SIZE              0x3000
+static int high_loaded;
+static uch *high_buffer_start /* = (uch *)(((ulg)&end) + HEAP_SIZE)*/;
+
+static char *vidmem = (char *)0xb8000;
+static int lines, cols;
+
+#include "../../../../lib/inflate.c"
+
+static void *malloc(int size)
+{
+       void *p;
+
+       if (size < 0)
+               error("Malloc error\n");
+       if (!free_mem_ptr)
+               error("Memory error\n");
+
+       free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
+
+       p = (void *) free_mem_ptr;
+       free_mem_ptr += size;
+
+       if (free_mem_ptr >= free_mem_end_ptr)
+               error("\nOut of memory\n");
+
+       return p;
+}
+
+static inline void scroll(void)
+{
+       int i;
+
+       memcpy(vidmem, vidmem + cols * 2, (lines - 1) * cols * 2);
+       for (i = (lines - 1) * cols * 2; i < lines * cols * 2; i += 2)
+               vidmem[i] = ' ';
+}
+
+static inline void kputchar(unsigned char ch)
+{
+#ifdef CONFIG_MN10300_UNIT_ASB2305
+       while (SC0STR & SC01STR_TBF)
+               continue;
+
+       if (ch == 0x0a) {
+               SC0TXB = 0x0d;
+               while (SC0STR & SC01STR_TBF)
+                       continue;
+       }
+
+       SC0TXB = ch;
+
+#else
+       while (SC1STR & SC01STR_TBF)
+               continue;
+
+       if (ch == 0x0a) {
+               SC1TXB = 0x0d;
+               while (SC1STR & SC01STR_TBF)
+                       continue;
+       }
+
+       SC1TXB = ch;
+
+#endif
+}
+
+static void kputs(const char *s)
+{
+#ifdef CONFIG_DEBUG_DECOMPRESS_KERNEL
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+       char ch;
+
+       FLOWCTL_SET(DTR);
+
+       while (*s) {
+               LSR_WAIT_FOR(THRE);
+
+               ch = *s++;
+               if (ch == 0x0a) {
+                       CYG_DEV_THR = 0x0d;
+                       LSR_WAIT_FOR(THRE);
+               }
+               CYG_DEV_THR = ch;
+       }
+
+       FLOWCTL_CLEAR(DTR);
+#else
+
+       for (; *s; s++)
+               kputchar(*s);
+
+#endif
+#endif /* CONFIG_DEBUG_DECOMPRESS_KERNEL */
+}
+
+/* ===========================================================================
+ * Fill the input buffer. This is called only when the buffer is empty
+ * and at least one byte is really needed.
+ */
+static int fill_inbuf()
+{
+       if (insize != 0)
+               error("ran out of input data\n");
+
+       inbuf = input_data;
+       insize = input_len;
+       inptr = 1;
+       return inbuf[0];
+}
+
+/* ===========================================================================
+ * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+ * (Used for the decompressed data only.)
+ */
+static void flush_window_low(void)
+{
+    ulg c = crc;         /* temporary variable */
+    unsigned n;
+    uch *in, *out, ch;
+
+    in = window;
+    out = &output_data[output_ptr];
+    for (n = 0; n < outcnt; n++) {
+           ch = *out++ = *in++;
+           c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+    }
+    crc = c;
+    bytes_out += (ulg)outcnt;
+    output_ptr += (ulg)outcnt;
+    outcnt = 0;
+}
+
+static void flush_window_high(void)
+{
+    ulg c = crc;         /* temporary variable */
+    unsigned n;
+    uch *in,  ch;
+    in = window;
+    for (n = 0; n < outcnt; n++) {
+       ch = *output_data++ = *in++;
+       if ((ulg) output_data == LOW_BUFFER_END)
+               output_data = high_buffer_start;
+       c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+    }
+    crc = c;
+    bytes_out += (ulg)outcnt;
+    outcnt = 0;
+}
+
+static void flush_window(void)
+{
+       if (high_loaded)
+               flush_window_high();
+       else
+               flush_window_low();
+}
+
+static void error(const char *x)
+{
+       kputs("\n\n");
+       kputs(x);
+       kputs("\n\n -- System halted");
+
+       while (1)
+               /* Halt */;
+}
+
+#define STACK_SIZE (4096)
+
+long user_stack[STACK_SIZE];
+
+struct {
+       long *a;
+       short b;
+} stack_start = { &user_stack[STACK_SIZE], 0 };
+
+void setup_normal_output_buffer(void)
+{
+#ifdef STANDARD_MEMORY_BIOS_CALL
+       if (EXT_MEM_K < 1024)
+               error("Less than 2MB of memory.\n");
+#else
+       if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < 1024)
+               error("Less than 2MB of memory.\n");
+#endif
+       output_data = (char *) 0x100000; /* Points to 1M */
+}
+
+struct moveparams {
+       uch *low_buffer_start;
+       int lcount;
+       uch *high_buffer_start;
+       int hcount;
+};
+
+void setup_output_buffer_if_we_run_high(struct moveparams *mv)
+{
+       high_buffer_start = (uch *)(((ulg) &end) + HEAP_SIZE);
+#ifdef STANDARD_MEMORY_BIOS_CALL
+       if (EXT_MEM_K < (3 * 1024))
+               error("Less than 4MB of memory.\n");
+#else
+       if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < (3 * 1024))
+               error("Less than 4MB of memory.\n");
+#endif
+       mv->low_buffer_start = output_data = (char *) LOW_BUFFER_START;
+       high_loaded = 1;
+       free_mem_end_ptr = (long) high_buffer_start;
+       if (0x100000 + LOW_BUFFER_SIZE > (ulg) high_buffer_start) {
+               high_buffer_start = (uch *)(0x100000 + LOW_BUFFER_SIZE);
+               mv->hcount = 0; /* say: we need not to move high_buffer */
+       } else {
+               mv->hcount = -1;
+       }
+       mv->high_buffer_start = high_buffer_start;
+}
+
+void close_output_buffer_if_we_run_high(struct moveparams *mv)
+{
+       mv->lcount = bytes_out;
+       if (bytes_out > LOW_BUFFER_SIZE) {
+               mv->lcount = LOW_BUFFER_SIZE;
+               if (mv->hcount)
+                       mv->hcount = bytes_out - LOW_BUFFER_SIZE;
+       } else {
+               mv->hcount = 0;
+       }
+}
+
+#undef DEBUGFLAG
+#ifdef DEBUGFLAG
+int debugflag;
+#endif
+
+int decompress_kernel(struct moveparams *mv)
+{
+#ifdef DEBUGFLAG
+       while (!debugflag)
+               barrier();
+#endif
+
+       output_data = (char *) CONFIG_KERNEL_TEXT_ADDRESS;
+
+       makecrc();
+       kputs("Uncompressing Linux... ");
+       gunzip();
+       kputs("Ok, booting the kernel.\n");
+       return 0;
+}
diff --git a/arch/mn10300/boot/compressed/misc.h b/arch/mn10300/boot/compressed/misc.h
new file mode 100644 (file)
index 0000000..da921cd
--- /dev/null
@@ -0,0 +1,18 @@
+/* Internal definitions for the MN10300 kernel decompressor
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+extern int end;
+
+/*
+ * vmlinux.lds
+ */
+extern char input_data[];
+extern int input_len;
diff --git a/arch/mn10300/boot/compressed/vmlinux.lds b/arch/mn10300/boot/compressed/vmlinux.lds
new file mode 100644 (file)
index 0000000..a084903
--- /dev/null
@@ -0,0 +1,9 @@
+SECTIONS
+{
+  .data : {
+       input_len = .;
+       LONG(input_data_end - input_data) input_data = .;
+       *(.data)
+       input_data_end = .;
+       }
+}
diff --git a/arch/mn10300/boot/install.sh b/arch/mn10300/boot/install.sh
new file mode 100644 (file)
index 0000000..072951c
--- /dev/null
@@ -0,0 +1,67 @@
+#!/bin/sh
+#
+# arch/mn10300/boot/install -c.sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# Licence.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+#
+# "make install -c" script for i386 architecture
+#
+# Arguments:
+#   $1 - kernel version
+#   $2 - kernel image file
+#   $3 - kernel map file
+#   $4 - default install -c path (blank if root directory)
+#   $5 - boot rom file
+#
+
+# User may have a custom install -c script
+
+rm -fr $4/../usr/include/linux $4/../usr/include/asm
+install -c -m 0755 $2 $4/vmlinuz
+install -c -m 0755 $5 $4/boot.rom
+install -c -m 0755 -d $4/../usr/include/linux
+cd $TOPDIR/include/linux
+for i in `find . -maxdepth 1 -name '*.h' -print`; do
+  install -c -m 0644 $i $4/../usr/include/linux
+done
+install -c -m 0755 -d $4/../usr/include/linux/byteorder
+cd $TOPDIR/include/linux/byteorder
+for i in `find . -name '*.h' -print`; do
+  install -c -m 0644 $i $4/../usr/include/linux/byteorder
+done
+install -c -m 0755 -d $4/../usr/include/linux/lockd
+cd $TOPDIR/include/linux/lockd
+for i in `find . -name '*.h' -print`; do
+  install -c -m 0644 $i $4/../usr/include/linux/lockd
+done
+install -c -m 0755 -d $4/../usr/include/linux/netfilter_ipv4
+cd $TOPDIR/include/linux/netfilter_ipv4
+for i in `find . -name '*.h' -print`; do
+  install -c -m 0644 $i $4/../usr/include/linux/netfilter_ipv4
+done
+install -c -m 0755 -d $4/../usr/include/linux/nfsd
+cd $TOPDIR/include/linux/nfsd
+for i in `find . -name '*.h' -print`; do
+  install -c -m 0644 $i $4/../usr/include/linux/nfsd/$i
+done
+install -c -m 0755 -d $4/../usr/include/linux/raid
+cd $TOPDIR/include/linux/raid
+for i in `find . -name '*.h' -print`; do
+  install -c -m 0644 $i $4/../usr/include/linux/raid
+done
+install -c -m 0755 -d $4/../usr/include/linux/sunrpc
+cd $TOPDIR/include/linux/sunrpc
+for i in `find . -name '*.h' -print`; do
+  install -c -m 0644 $i $4/../usr/include/linux/sunrpc
+done
+install -c -m 0755 -d $4/../usr/include/asm
+cd $TOPDIR/include/asm
+for i in `find . -name '*.h' -print`; do
+  install -c -m 0644 $i $4/../usr/include/asm
+done
diff --git a/arch/mn10300/boot/tools/build.c b/arch/mn10300/boot/tools/build.c
new file mode 100644 (file)
index 0000000..4f552ea
--- /dev/null
@@ -0,0 +1,190 @@
+/*
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *  Copyright (C) 1997 Martin Mares
+ */
+
+/*
+ * This file builds a disk-image from three different files:
+ *
+ * - bootsect: exactly 512 bytes of 8086 machine code, loads the rest
+ * - setup: 8086 machine code, sets up system parm
+ * - system: 80386 code for actual system
+ *
+ * It does some checking that all files are of the correct type, and
+ * just writes the result to stdout, removing headers and padding to
+ * the right amount. It also writes some system data to stderr.
+ */
+
+/*
+ * Changes by tytso to allow root device specification
+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
+ * Cross compiling fixes by Gertjan van Wingerde, July 1996
+ * Rewritten by Martin Mares, April 1997
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/sysmacros.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <asm/boot.h>
+
+#define DEFAULT_MAJOR_ROOT 0
+#define DEFAULT_MINOR_ROOT 0
+
+/* Minimal number of setup sectors (see also bootsect.S) */
+#define SETUP_SECTS 4
+
+uint8_t buf[1024];
+int fd;
+int is_big_kernel;
+
+__attribute__((noreturn))
+void die(const char *str, ...)
+{
+       va_list args;
+       va_start(args, str);
+       vfprintf(stderr, str, args);
+       fputc('\n', stderr);
+       exit(1);
+}
+
+void file_open(const char *name)
+{
+       fd = open(name, O_RDONLY, 0);
+       if (fd < 0)
+               die("Unable to open `%s': %m", name);
+}
+
+__attribute__((noreturn))
+void usage(void)
+{
+       die("Usage: build [-b] bootsect setup system [rootdev] [> image]");
+}
+
+int main(int argc, char **argv)
+{
+       unsigned int i, c, sz, setup_sectors;
+       uint32_t sys_size;
+       uint8_t major_root, minor_root;
+       struct stat sb;
+
+       if (argc > 2 && !strcmp(argv[1], "-b")) {
+               is_big_kernel = 1;
+               argc--, argv++;
+       }
+       if ((argc < 4) || (argc > 5))
+               usage();
+       if (argc > 4) {
+               if (!strcmp(argv[4], "CURRENT")) {
+                       if (stat("/", &sb)) {
+                               perror("/");
+                               die("Couldn't stat /");
+                       }
+                       major_root = major(sb.st_dev);
+                       minor_root = minor(sb.st_dev);
+               } else if (strcmp(argv[4], "FLOPPY")) {
+                       if (stat(argv[4], &sb)) {
+                               perror(argv[4]);
+                               die("Couldn't stat root device.");
+                       }
+                       major_root = major(sb.st_rdev);
+                       minor_root = minor(sb.st_rdev);
+               } else {
+                       major_root = 0;
+                       minor_root = 0;
+               }
+       } else {
+               major_root = DEFAULT_MAJOR_ROOT;
+               minor_root = DEFAULT_MINOR_ROOT;
+       }
+       fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root);
+
+       file_open(argv[1]);
+       i = read(fd, buf, sizeof(buf));
+       fprintf(stderr, "Boot sector %d bytes.\n", i);
+       if (i != 512)
+               die("Boot block must be exactly 512 bytes");
+       if (buf[510] != 0x55 || buf[511] != 0xaa)
+               die("Boot block hasn't got boot flag (0xAA55)");
+       buf[508] = minor_root;
+       buf[509] = major_root;
+       if (write(1, buf, 512) != 512)
+               die("Write call failed");
+       close(fd);
+
+       /* Copy the setup code */
+       file_open(argv[2]);
+       for (i = 0; (c = read(fd, buf, sizeof(buf))) > 0; i += c)
+               if (write(1, buf, c) != c)
+                       die("Write call failed");
+       if (c != 0)
+               die("read-error on `setup'");
+       close(fd);
+
+       /* Pad unused space with zeros */
+       setup_sectors = (i + 511) / 512;
+       /* for compatibility with ancient versions of LILO. */
+       if (setup_sectors < SETUP_SECTS)
+               setup_sectors = SETUP_SECTS;
+       fprintf(stderr, "Setup is %d bytes.\n", i);
+       memset(buf, 0, sizeof(buf));
+       while (i < setup_sectors * 512) {
+               c = setup_sectors * 512 - i;
+               if (c > sizeof(buf))
+                       c = sizeof(buf);
+               if (write(1, buf, c) != c)
+                       die("Write call failed");
+               i += c;
+       }
+
+       file_open(argv[3]);
+       if (fstat(fd, &sb))
+               die("Unable to stat `%s': %m", argv[3]);
+       sz = sb.st_size;
+       fprintf(stderr, "System is %d kB\n", sz / 1024);
+       sys_size = (sz + 15) / 16;
+       /* 0x28000*16 = 2.5 MB, conservative estimate for the current maximum */
+       if (sys_size > (is_big_kernel ? 0x28000 : DEF_SYSSIZE))
+               die("System is too big. Try using %smodules.",
+                       is_big_kernel ? "" : "bzImage or ");
+       if (sys_size > 0xffff)
+               fprintf(stderr,
+                       "warning: kernel is too big for standalone boot "
+                       "from floppy\n");
+       while (sz > 0) {
+               int l, n;
+
+               l = (sz > sizeof(buf)) ? sizeof(buf) : sz;
+               n = read(fd, buf, l);
+               if (n != l) {
+                       if (n < 0)
+                               die("Error reading %s: %m", argv[3]);
+                       else
+                               die("%s: Unexpected EOF", argv[3]);
+               }
+               if (write(1, buf, l) != l)
+                       die("Write failed");
+               sz -= l;
+       }
+       close(fd);
+
+       /* Write sizes to the bootsector */
+       if (lseek(1, 497, SEEK_SET) != 497)
+               die("Output: seek failed");
+       buf[0] = setup_sectors;
+       if (write(1, buf, 1) != 1)
+               die("Write of setup sector count failed");
+       if (lseek(1, 500, SEEK_SET) != 500)
+               die("Output: seek failed");
+       buf[0] = (sys_size & 0xff);
+       buf[1] = ((sys_size >> 8) & 0xff);
+       if (write(1, buf, 2) != 2)
+               die("Write of image length failed");
+
+       return 0;
+}
diff --git a/arch/mn10300/configs/asb2303_defconfig b/arch/mn10300/configs/asb2303_defconfig
new file mode 100644 (file)
index 0000000..0189a05
--- /dev/null
@@ -0,0 +1,555 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc2
+# Fri Nov 16 13:36:38 2007
+#
+CONFIG_MN10300=y
+CONFIG_AM33=y
+CONFIG_MMU=y
+# CONFIG_HIGHMEM is not set
+# CONFIG_NUMA is not set
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_BUG=y
+CONFIG_QUICKLIST=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+# CONFIG_ARCH_SUPPORTS_AOUT is not set
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+# CONFIG_BLOCK is not set
+
+#
+# Matsushita MN10300 system setup
+#
+CONFIG_MN10300_UNIT_ASB2303=y
+# CONFIG_MN10300_UNIT_ASB2305 is not set
+CONFIG_MN10300_PROC_MN103E010=y
+CONFIG_MN10300_CPU_AM33V2=y
+CONFIG_FPU=y
+CONFIG_MN10300_CACHE_WBACK=y
+# CONFIG_MN10300_CACHE_WTHRU is not set
+# CONFIG_MN10300_CACHE_DISABLED is not set
+
+#
+# Memory layout options
+#
+CONFIG_KERNEL_RAM_BASE_ADDRESS=0x90000000
+CONFIG_INTERRUPT_VECTOR_BASE=0x90000000
+CONFIG_KERNEL_TEXT_ADDRESS=0x90001000
+CONFIG_KERNEL_ZIMAGE_BASE_ADDRESS=0x90700000
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_BKL=y
+CONFIG_MN10300_CURRENT_IN_E2=y
+CONFIG_MN10300_USING_JTAG=y
+CONFIG_MN10300_RTC=y
+CONFIG_MN10300_WD_TIMER=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# MN10300 internal serial options
+#
+CONFIG_MN10300_PROC_HAS_TTYSM0=y
+CONFIG_MN10300_PROC_HAS_TTYSM1=y
+CONFIG_MN10300_PROC_HAS_TTYSM2=y
+CONFIG_MN10300_TTYSM=y
+CONFIG_MN10300_TTYSM_CONSOLE=y
+CONFIG_MN10300_TTYSM0=y
+CONFIG_MN10300_TTYSM0_TIMER8=y
+# CONFIG_MN10300_TTYSM0_TIMER2 is not set
+CONFIG_MN10300_TTYSM1=y
+CONFIG_MN10300_TTYSM1_TIMER9=y
+# CONFIG_MN10300_TTYSM1_TIMER3 is not set
+# CONFIG_MN10300_TTYSM2 is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=1
+CONFIG_VIRT_TO_BUS=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Executable formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_RTC=y
+# CONFIG_R3964 is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
diff --git a/arch/mn10300/kernel/Makefile b/arch/mn10300/kernel/Makefile
new file mode 100644 (file)
index 0000000..ef07c95
--- /dev/null
@@ -0,0 +1,27 @@
+#
+# Makefile for the MN10300-specific core kernel code
+#
+extra-y := head.o init_task.o vmlinux.lds
+
+obj-y   := process.o semaphore.o signal.o entry.o fpu.o traps.o irq.o \
+          ptrace.o setup.o time.o sys_mn10300.o io.o kthread.o \
+          switch_to.o mn10300_ksyms.o kernel_execve.o
+
+obj-$(CONFIG_MN10300_WD_TIMER) += mn10300-watchdog.o mn10300-watchdog-low.o
+
+obj-$(CONFIG_FPU) += fpu-low.o
+
+obj-$(CONFIG_MN10300_TTYSM) += mn10300-serial.o mn10300-serial-low.o \
+                              mn10300-debug.o
+obj-$(CONFIG_GDBSTUB) += gdb-stub.o gdb-low.o
+obj-$(CONFIG_GDBSTUB_ON_TTYSx) += gdb-io-serial.o gdb-io-serial-low.o
+obj-$(CONFIG_GDBSTUB_ON_TTYSMx) += gdb-io-ttysm.o gdb-io-ttysm-low.o
+
+ifneq ($(CONFIG_MN10300_CACHE_DISABLED),y)
+obj-$(CONFIG_GDBSTUB) += gdb-cache.o
+endif
+
+obj-$(CONFIG_MN10300_RTC) += rtc.o
+obj-$(CONFIG_PROFILE) += profile.o profile-low.o
+obj-$(CONFIG_MODULES) += module.o
+obj-$(CONFIG_KPROBES) += kprobes.o
diff --git a/arch/mn10300/kernel/asm-offsets.c b/arch/mn10300/kernel/asm-offsets.c
new file mode 100644 (file)
index 0000000..ee2d9f8
--- /dev/null
@@ -0,0 +1,108 @@
+/*
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed
+ * to extract and format the required data.
+ */
+
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/personality.h>
+#include <asm/ucontext.h>
+#include <asm/processor.h>
+#include <asm/thread_info.h>
+#include <asm/ptrace.h>
+#include "sigframe.h"
+#include "mn10300-serial.h"
+
+#define DEFINE(sym, val) \
+       asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define BLANK() asm volatile("\n->")
+
+#define OFFSET(sym, str, mem) \
+       DEFINE(sym, offsetof(struct str, mem));
+
+void foo(void)
+{
+       OFFSET(SIGCONTEXT_d0, sigcontext, d0);
+       OFFSET(SIGCONTEXT_d1, sigcontext, d1);
+       BLANK();
+
+       OFFSET(TI_task,                 thread_info, task);
+       OFFSET(TI_exec_domain,          thread_info, exec_domain);
+       OFFSET(TI_flags,                thread_info, flags);
+       OFFSET(TI_cpu,                  thread_info, cpu);
+       OFFSET(TI_preempt_count,        thread_info, preempt_count);
+       OFFSET(TI_addr_limit,           thread_info, addr_limit);
+       OFFSET(TI_restart_block,        thread_info, restart_block);
+       BLANK();
+
+       OFFSET(REG_D0,                  pt_regs, d0);
+       OFFSET(REG_D1,                  pt_regs, d1);
+       OFFSET(REG_D2,                  pt_regs, d2);
+       OFFSET(REG_D3,                  pt_regs, d3);
+       OFFSET(REG_A0,                  pt_regs, a0);
+       OFFSET(REG_A1,                  pt_regs, a1);
+       OFFSET(REG_A2,                  pt_regs, a2);
+       OFFSET(REG_A3,                  pt_regs, a3);
+       OFFSET(REG_E0,                  pt_regs, e0);
+       OFFSET(REG_E1,                  pt_regs, e1);
+       OFFSET(REG_E2,                  pt_regs, e2);
+       OFFSET(REG_E3,                  pt_regs, e3);
+       OFFSET(REG_E4,                  pt_regs, e4);
+       OFFSET(REG_E5,                  pt_regs, e5);
+       OFFSET(REG_E6,                  pt_regs, e6);
+       OFFSET(REG_E7,                  pt_regs, e7);
+       OFFSET(REG_SP,                  pt_regs, sp);
+       OFFSET(REG_EPSW,                pt_regs, epsw);
+       OFFSET(REG_PC,                  pt_regs, pc);
+       OFFSET(REG_LAR,                 pt_regs, lar);
+       OFFSET(REG_LIR,                 pt_regs, lir);
+       OFFSET(REG_MDR,                 pt_regs, mdr);
+       OFFSET(REG_MCVF,                pt_regs, mcvf);
+       OFFSET(REG_MCRL,                pt_regs, mcrl);
+       OFFSET(REG_MCRH,                pt_regs, mcrh);
+       OFFSET(REG_MDRQ,                pt_regs, mdrq);
+       OFFSET(REG_ORIG_D0,             pt_regs, orig_d0);
+       OFFSET(REG_NEXT,                pt_regs, next);
+       DEFINE(REG__END,                sizeof(struct pt_regs));
+       BLANK();
+
+       OFFSET(THREAD_UREGS,            thread_struct, uregs);
+       OFFSET(THREAD_PC,               thread_struct, pc);
+       OFFSET(THREAD_SP,               thread_struct, sp);
+       OFFSET(THREAD_A3,               thread_struct, a3);
+       OFFSET(THREAD_USP,              thread_struct, usp);
+       OFFSET(THREAD_FRAME,            thread_struct, __frame);
+       BLANK();
+
+       DEFINE(CLONE_VM_asm,            CLONE_VM);
+       DEFINE(CLONE_FS_asm,            CLONE_FS);
+       DEFINE(CLONE_FILES_asm,         CLONE_FILES);
+       DEFINE(CLONE_SIGHAND_asm,       CLONE_SIGHAND);
+       DEFINE(CLONE_UNTRACED_asm,      CLONE_UNTRACED);
+       DEFINE(SIGCHLD_asm,             SIGCHLD);
+       BLANK();
+
+       OFFSET(EXEC_DOMAIN_handler,     exec_domain, handler);
+       OFFSET(RT_SIGFRAME_sigcontext,  rt_sigframe, uc.uc_mcontext);
+
+       DEFINE(PAGE_SIZE_asm,           PAGE_SIZE);
+
+       OFFSET(__rx_buffer,             mn10300_serial_port, rx_buffer);
+       OFFSET(__rx_inp,                mn10300_serial_port, rx_inp);
+       OFFSET(__rx_outp,               mn10300_serial_port, rx_outp);
+       OFFSET(__tx_info_buffer,        mn10300_serial_port, uart.info);
+       OFFSET(__tx_xchar,              mn10300_serial_port, tx_xchar);
+       OFFSET(__tx_break,              mn10300_serial_port, tx_break);
+       OFFSET(__intr_flags,            mn10300_serial_port, intr_flags);
+       OFFSET(__rx_icr,                mn10300_serial_port, rx_icr);
+       OFFSET(__tx_icr,                mn10300_serial_port, tx_icr);
+       OFFSET(__tm_icr,                mn10300_serial_port, _tmicr);
+       OFFSET(__iobase,                mn10300_serial_port, _iobase);
+
+       DEFINE(__UART_XMIT_SIZE,        UART_XMIT_SIZE);
+       OFFSET(__xmit_buffer,           uart_info, xmit.buf);
+       OFFSET(__xmit_head,             uart_info, xmit.head);
+       OFFSET(__xmit_tail,             uart_info, xmit.tail);
+}
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
new file mode 100644 (file)
index 0000000..11de360
--- /dev/null
@@ -0,0 +1,721 @@
+###############################################################################
+#
+# MN10300 Exception and interrupt entry points
+#
+# Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Modified by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/system.h>
+#include <asm/thread_info.h>
+#include <asm/intctl-regs.h>
+#include <asm/busctl-regs.h>
+#include <asm/timer-regs.h>
+#include <asm/unit/leds.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/errno.h>
+#include <asm/asm-offsets.h>
+#include <asm/frame.inc>
+
+#ifdef CONFIG_PREEMPT
+#define preempt_stop           __cli
+#else
+#define preempt_stop
+#define resume_kernel          restore_all
+#endif
+
+       .macro __cli
+       and     ~EPSW_IM,epsw
+       or      EPSW_IE|MN10300_CLI_LEVEL,epsw
+       nop
+       nop
+       nop
+       .endm
+       .macro __sti
+       or      EPSW_IE|EPSW_IM_7,epsw
+       .endm
+
+
+       .am33_2
+
+###############################################################################
+#
+# the return path for a forked child
+# - on entry, D0 holds the address of the previous task to run
+#
+###############################################################################
+ENTRY(ret_from_fork)
+       call    schedule_tail[],0
+       GET_THREAD_INFO a2
+
+       # return 0 to indicate child process
+       clr     d0
+       mov     d0,(REG_D0,fp)
+       jmp     syscall_exit
+
+###############################################################################
+#
+# system call handler
+#
+###############################################################################
+ENTRY(system_call)
+       add     -4,sp
+       SAVE_ALL
+       mov     d0,(REG_ORIG_D0,fp)
+       GET_THREAD_INFO a2
+       cmp     nr_syscalls,d0
+       bcc     syscall_badsys
+       btst    _TIF_SYSCALL_TRACE,(TI_flags,a2)
+       bne     syscall_trace_entry
+syscall_call:
+       add     d0,d0,a1
+       add     a1,a1
+       mov     (REG_A0,fp),d0
+       mov     (sys_call_table,a1),a0
+       calls   (a0)
+       mov     d0,(REG_D0,fp)
+syscall_exit:
+       # make sure we don't miss an interrupt setting need_resched or
+       # sigpending between sampling and the rti
+       __cli
+       mov     (TI_flags,a2),d2
+       btst    _TIF_ALLWORK_MASK,d2
+       bne     syscall_exit_work
+restore_all:
+       RESTORE_ALL
+
+###############################################################################
+#
+# perform work that needs to be done immediately before resumption and syscall
+# tracing
+#
+###############################################################################
+       ALIGN
+syscall_exit_work:
+       btst    _TIF_SYSCALL_TRACE,d2
+       beq     work_pending
+       __sti                           # could let do_syscall_trace() call
+                                       # schedule() instead
+       mov     fp,d0
+       mov     1,d1
+       call    do_syscall_trace[],0    # do_syscall_trace(regs,entryexit)
+       jmp     resume_userspace
+
+       ALIGN
+work_pending:
+       btst    _TIF_NEED_RESCHED,d2
+       beq     work_notifysig
+
+work_resched:
+       call    schedule[],0
+
+       # make sure we don't miss an interrupt setting need_resched or
+       # sigpending between sampling and the rti
+       __cli
+
+       # is there any work to be done other than syscall tracing?
+       mov     (TI_flags,a2),d2
+       btst    _TIF_WORK_MASK,d2
+       beq     restore_all
+       btst    _TIF_NEED_RESCHED,d2
+       bne     work_resched
+
+       # deal with pending signals and notify-resume requests
+work_notifysig:
+       mov     fp,d0
+       mov     d2,d1
+       call    do_notify_resume[],0
+       jmp     resume_userspace
+
+       # perform syscall entry tracing
+syscall_trace_entry:
+       mov     -ENOSYS,d0
+       mov     d0,(REG_D0,fp)
+       mov     fp,d0
+       clr     d1
+       call    do_syscall_trace[],0
+       mov     (REG_ORIG_D0,fp),d0
+       mov     (REG_D1,fp),d1
+       cmp     nr_syscalls,d0
+       bcs     syscall_call
+       jmp     syscall_exit
+
+syscall_badsys:
+       mov     -ENOSYS,d0
+       mov     d0,(REG_D0,fp)
+       jmp     resume_userspace
+
+       # userspace resumption stub bypassing syscall exit tracing
+       .globl  ret_from_exception, ret_from_intr
+       ALIGN
+ret_from_exception:
+       preempt_stop
+ret_from_intr:
+       GET_THREAD_INFO a2
+       mov     (REG_EPSW,fp),d0        # need to deliver signals before
+                                       # returning to userspace
+       and     EPSW_nSL,d0
+       beq     resume_kernel           # returning to supervisor mode
+
+ENTRY(resume_userspace)
+       # make sure we don't miss an interrupt setting need_resched or
+       # sigpending between sampling and the rti
+       __cli
+
+       # is there any work to be done on int/exception return?
+       mov     (TI_flags,a2),d2
+       btst    _TIF_WORK_MASK,d2
+       bne     work_pending
+       jmp     restore_all
+
+#ifdef CONFIG_PREEMPT
+ENTRY(resume_kernel)
+       mov     (TI_preempt_count,a2),d0        # non-zero preempt_count ?
+       cmp     0,d0
+       bne     restore_all
+
+need_resched:
+       btst    _TIF_NEED_RESCHED,(TI_flags,a2)
+       beq     restore_all
+       mov     (REG_EPSW,fp),d0
+       and     EPSW_IM,d0
+       cmp     EPSW_IM_7,d0            # interrupts off (exception path) ?
+       beq     restore_all
+       call    preempt_schedule_irq[],0
+       jmp     need_resched
+#endif
+
+
+###############################################################################
+#
+# IRQ handler entry point
+# - intended to be entered at multiple priorities
+#
+###############################################################################
+ENTRY(irq_handler)
+       add     -4,sp
+       SAVE_ALL
+
+       # it's not a syscall
+       mov     0xffffffff,d0
+       mov     d0,(REG_ORIG_D0,fp)
+
+       mov     fp,d0
+       call    do_IRQ[],0                      # do_IRQ(regs)
+
+       jmp     ret_from_intr
+
+###############################################################################
+#
+# Monitor Signal handler entry point
+#
+###############################################################################
+ENTRY(monitor_signal)
+       movbu   (0xae000001),d1
+       cmp     1,d1
+       beq     monsignal
+       ret     [],0
+
+monsignal:
+       or      EPSW_NMID,epsw
+       mov     d0,a0
+       mov     a0,sp
+       mov     (REG_EPSW,fp),d1
+       and     ~EPSW_nSL,d1
+       mov     d1,(REG_EPSW,fp)
+       movm    (sp),[d2,d3,a2,a3,exreg0,exreg1,exother]
+       mov     (sp),a1
+       mov     a1,usp
+       movm    (sp),[other]
+       add     4,sp
+here:  jmp     0x8e000008-here+0x8e000008
+
+###############################################################################
+#
+# Double Fault handler entry point
+# - note that there will not be a stack, D0/A0 will hold EPSW/PC as were
+#
+###############################################################################
+       .section .bss
+       .balign THREAD_SIZE
+       .space  THREAD_SIZE
+__df_stack:
+       .previous
+
+ENTRY(double_fault)
+       mov     a0,(__df_stack-4)       # PC as was
+       mov     d0,(__df_stack-8)       # EPSW as was
+       mn10300_set_dbfleds             # display 'db-f' on the LEDs
+       mov     0xaa55aa55,d0
+       mov     d0,(__df_stack-12)      # no ORIG_D0
+       mov     sp,a0                   # save corrupted SP
+       mov     __df_stack-12,sp        # emergency supervisor stack
+       SAVE_ALL
+       mov     a0,(REG_A0,fp)          # save corrupted SP as A0 (which got
+                                       # clobbered by the CPU)
+       mov     fp,d0
+       calls   do_double_fault
+double_fault_loop:
+       bra     double_fault_loop
+
+###############################################################################
+#
+# Bus Error handler entry point
+# - handle external (async) bus errors separately
+#
+###############################################################################
+ENTRY(raw_bus_error)
+       add     -4,sp
+       mov     d0,(sp)
+       mov     (BCBERR),d0             # what
+       btst    BCBERR_BEMR_DMA,d0      # see if it was an external bus error
+       beq     __common_exception_aux  # it wasn't
+
+       SAVE_ALL
+       mov     (BCBEAR),d1             # destination of erroneous access
+
+       mov     (REG_ORIG_D0,fp),d2
+       mov     d2,(REG_D0,fp)
+       mov     -1,d2
+       mov     d2,(REG_ORIG_D0,fp)
+
+       add     -4,sp
+       mov     fp,(12,sp)              # frame pointer
+       call    io_bus_error[],0
+       jmp     restore_all
+
+###############################################################################
+#
+# Miscellaneous exception entry points
+#
+###############################################################################
+ENTRY(nmi_handler)
+       add     -4,sp
+       mov     d0,(sp)
+       mov     (TBR),d0
+       bra     __common_exception_nonmi
+
+ENTRY(__common_exception)
+       add     -4,sp
+       mov     d0,(sp)
+
+__common_exception_aux:
+       mov     (TBR),d0
+       and     ~EPSW_NMID,epsw         # turn NMIs back on if not NMI
+       or      EPSW_IE,epsw
+
+__common_exception_nonmi:
+       and     0x0000FFFF,d0           # turn the exception code into a vector
+                                       # table index
+
+       btst    0x00000007,d0
+       bne     1f
+       cmp     0x00000400,d0
+       bge     1f
+
+       SAVE_ALL                        # build the stack frame
+
+       mov     (REG_D0,fp),a2          # get the exception number
+       mov     (REG_ORIG_D0,fp),d0
+       mov     d0,(REG_D0,fp)
+       mov     -1,d0
+       mov     d0,(REG_ORIG_D0,fp)
+
+#ifdef CONFIG_GDBSTUB
+       btst    0x01,(gdbstub_busy)
+       beq     2f
+       and     ~EPSW_IE,epsw
+       mov     fp,d0
+       mov     a2,d1
+       call    gdbstub_exception[],0   # gdbstub itself caused an exception
+       bra     restore_all
+2:
+#endif
+
+       mov     fp,d0                   # arg 0: stacked register file
+       mov     a2,d1                   # arg 1: exception number
+       lsr     1,a2
+
+       mov     (exception_table,a2),a2
+       calls   (a2)
+       jmp     ret_from_exception
+
+1:     pi                              # BUG() equivalent
+
+###############################################################################
+#
+# Exception handler functions table
+#
+###############################################################################
+       .data
+ENTRY(exception_table)
+       .rept   0x400>>1
+        .long  uninitialised_exception
+       .endr
+       .previous
+
+###############################################################################
+#
+# Change an entry in the exception table
+# - D0 exception code, D1 handler
+#
+###############################################################################
+ENTRY(set_excp_vector)
+       lsr     1,d0
+       add     exception_table,d0
+       mov     d1,(d0)
+       mov     4,d1
+#if defined(CONFIG_MN10300_CACHE_WBACK)
+       jmp     mn10300_dcache_flush_inv_range2
+#else
+       ret     [],0
+#endif
+
+###############################################################################
+#
+# System call table
+#
+###############################################################################
+       .data
+ENTRY(sys_call_table)
+       .long sys_restart_syscall       /* 0 */
+       .long sys_exit
+       .long sys_fork
+       .long sys_read
+       .long sys_write
+       .long sys_open          /* 5 */
+       .long sys_close
+       .long sys_waitpid
+       .long sys_creat
+       .long sys_link
+       .long sys_unlink        /* 10 */
+       .long sys_execve
+       .long sys_chdir
+       .long sys_time
+       .long sys_mknod
+       .long sys_chmod         /* 15 */
+       .long sys_lchown16
+       .long sys_ni_syscall    /* old break syscall holder */
+       .long sys_stat
+       .long sys_lseek
+       .long sys_getpid        /* 20 */
+       .long sys_mount
+       .long sys_oldumount
+       .long sys_setuid16
+       .long sys_getuid16
+       .long sys_stime         /* 25 */
+       .long sys_ptrace
+       .long sys_alarm
+       .long sys_fstat
+       .long sys_pause
+       .long sys_utime         /* 30 */
+       .long sys_ni_syscall    /* old stty syscall holder */
+       .long sys_ni_syscall    /* old gtty syscall holder */
+       .long sys_access
+       .long sys_nice
+       .long sys_ni_syscall    /* 35 - old ftime syscall holder */
+       .long sys_sync
+       .long sys_kill
+       .long sys_rename
+       .long sys_mkdir
+       .long sys_rmdir         /* 40 */
+       .long sys_dup
+       .long sys_pipe
+       .long sys_times
+       .long sys_ni_syscall    /* old prof syscall holder */
+       .long sys_brk           /* 45 */
+       .long sys_setgid16
+       .long sys_getgid16
+       .long sys_signal
+       .long sys_geteuid16
+       .long sys_getegid16     /* 50 */
+       .long sys_acct
+       .long sys_umount        /* recycled never used phys() */
+       .long sys_ni_syscall    /* old lock syscall holder */
+       .long sys_ioctl
+       .long sys_fcntl         /* 55 */
+       .long sys_ni_syscall    /* old mpx syscall holder */
+       .long sys_setpgid
+       .long sys_ni_syscall    /* old ulimit syscall holder */
+       .long sys_ni_syscall    /* old sys_olduname */
+       .long sys_umask         /* 60 */
+       .long sys_chroot
+       .long sys_ustat
+       .long sys_dup2
+       .long sys_getppid
+       .long sys_getpgrp       /* 65 */
+       .long sys_setsid
+       .long sys_sigaction
+       .long sys_sgetmask
+       .long sys_ssetmask
+       .long sys_setreuid16    /* 70 */
+       .long sys_setregid16
+       .long sys_sigsuspend
+       .long sys_sigpending
+       .long sys_sethostname
+       .long sys_setrlimit     /* 75 */
+       .long sys_old_getrlimit
+       .long sys_getrusage
+       .long sys_gettimeofday
+       .long sys_settimeofday
+       .long sys_getgroups16   /* 80 */
+       .long sys_setgroups16
+       .long old_select
+       .long sys_symlink
+       .long sys_lstat
+       .long sys_readlink      /* 85 */
+       .long sys_uselib
+       .long sys_swapon
+       .long sys_reboot
+       .long old_readdir
+       .long old_mmap          /* 90 */
+       .long sys_munmap
+       .long sys_truncate
+       .long sys_ftruncate
+       .long sys_fchmod
+       .long sys_fchown16      /* 95 */
+       .long sys_getpriority
+       .long sys_setpriority
+       .long sys_ni_syscall    /* old profil syscall holder */
+       .long sys_statfs
+       .long sys_fstatfs       /* 100 */
+       .long sys_ni_syscall    /* ioperm */
+       .long sys_socketcall
+       .long sys_syslog
+       .long sys_setitimer
+       .long sys_getitimer     /* 105 */
+       .long sys_newstat
+       .long sys_newlstat
+       .long sys_newfstat
+       .long sys_ni_syscall    /* old sys_uname */
+       .long sys_ni_syscall    /* 110 - iopl */
+       .long sys_vhangup
+       .long sys_ni_syscall    /* old "idle" system call */
+       .long sys_ni_syscall    /* vm86old */
+       .long sys_wait4
+       .long sys_swapoff       /* 115 */
+       .long sys_sysinfo
+       .long sys_ipc
+       .long sys_fsync
+       .long sys_sigreturn
+       .long sys_clone         /* 120 */
+       .long sys_setdomainname
+       .long sys_newuname
+       .long sys_ni_syscall    /* modify_ldt */
+       .long sys_adjtimex
+       .long sys_mprotect      /* 125 */
+       .long sys_sigprocmask
+       .long sys_ni_syscall    /* old "create_module" */
+       .long sys_init_module
+       .long sys_delete_module
+       .long sys_ni_syscall    /* 130: old "get_kernel_syms" */
+       .long sys_quotactl
+       .long sys_getpgid
+       .long sys_fchdir
+       .long sys_bdflush
+       .long sys_sysfs         /* 135 */
+       .long sys_personality
+       .long sys_ni_syscall    /* reserved for afs_syscall */
+       .long sys_setfsuid16
+       .long sys_setfsgid16
+       .long sys_llseek        /* 140 */
+       .long sys_getdents
+       .long sys_select
+       .long sys_flock
+       .long sys_msync
+       .long sys_readv         /* 145 */
+       .long sys_writev
+       .long sys_getsid
+       .long sys_fdatasync
+       .long sys_sysctl
+       .long sys_mlock         /* 150 */
+       .long sys_munlock
+       .long sys_mlockall
+       .long sys_munlockall
+       .long sys_sched_setparam
+       .long sys_sched_getparam   /* 155 */
+       .long sys_sched_setscheduler
+       .long sys_sched_getscheduler
+       .long sys_sched_yield
+       .long sys_sched_get_priority_max
+       .long sys_sched_get_priority_min  /* 160 */
+       .long sys_sched_rr_get_interval
+       .long sys_nanosleep
+       .long sys_mremap
+       .long sys_setresuid16
+       .long sys_getresuid16   /* 165 */
+       .long sys_ni_syscall    /* vm86 */
+       .long sys_ni_syscall    /* Old sys_query_module */
+       .long sys_poll
+       .long sys_nfsservctl
+       .long sys_setresgid16   /* 170 */
+       .long sys_getresgid16
+       .long sys_prctl
+       .long sys_rt_sigreturn
+       .long sys_rt_sigaction
+       .long sys_rt_sigprocmask        /* 175 */
+       .long sys_rt_sigpending
+       .long sys_rt_sigtimedwait
+       .long sys_rt_sigqueueinfo
+       .long sys_rt_sigsuspend
+       .long sys_pread64       /* 180 */
+       .long sys_pwrite64
+       .long sys_chown16
+       .long sys_getcwd
+       .long sys_capget
+       .long sys_capset        /* 185 */
+       .long sys_sigaltstack
+       .long sys_sendfile
+       .long sys_ni_syscall    /* reserved for streams1 */
+       .long sys_ni_syscall    /* reserved for streams2 */
+       .long sys_vfork         /* 190 */
+       .long sys_getrlimit
+       .long sys_mmap2
+       .long sys_truncate64
+       .long sys_ftruncate64
+       .long sys_stat64        /* 195 */
+       .long sys_lstat64
+       .long sys_fstat64
+       .long sys_lchown
+       .long sys_getuid
+       .long sys_getgid        /* 200 */
+       .long sys_geteuid
+       .long sys_getegid
+       .long sys_setreuid
+       .long sys_setregid
+       .long sys_getgroups     /* 205 */
+       .long sys_setgroups
+       .long sys_fchown
+       .long sys_setresuid
+       .long sys_getresuid
+       .long sys_setresgid     /* 210 */
+       .long sys_getresgid
+       .long sys_chown
+       .long sys_setuid
+       .long sys_setgid
+       .long sys_setfsuid      /* 215 */
+       .long sys_setfsgid
+       .long sys_pivot_root
+       .long sys_mincore
+       .long sys_madvise
+       .long sys_getdents64    /* 220 */
+       .long sys_fcntl64
+       .long sys_ni_syscall    /* reserved for TUX */
+       .long sys_ni_syscall
+       .long sys_gettid
+       .long sys_readahead     /* 225 */
+       .long sys_setxattr
+       .long sys_lsetxattr
+       .long sys_fsetxattr
+       .long sys_getxattr
+       .long sys_lgetxattr     /* 230 */
+       .long sys_fgetxattr
+       .long sys_listxattr
+       .long sys_llistxattr
+       .long sys_flistxattr
+       .long sys_removexattr   /* 235 */
+       .long sys_lremovexattr
+       .long sys_fremovexattr
+       .long sys_tkill
+       .long sys_sendfile64
+       .long sys_futex         /* 240 */
+       .long sys_sched_setaffinity
+       .long sys_sched_getaffinity
+       .long sys_ni_syscall    /* sys_set_thread_area */
+       .long sys_ni_syscall    /* sys_get_thread_area */
+       .long sys_io_setup      /* 245 */
+       .long sys_io_destroy
+       .long sys_io_getevents
+       .long sys_io_submit
+       .long sys_io_cancel
+       .long sys_fadvise64     /* 250 */
+       .long sys_ni_syscall
+       .long sys_exit_group
+       .long sys_lookup_dcookie
+       .long sys_epoll_create
+       .long sys_epoll_ctl     /* 255 */
+       .long sys_epoll_wait
+       .long sys_remap_file_pages
+       .long sys_set_tid_address
+       .long sys_timer_create
+       .long sys_timer_settime         /* 260 */
+       .long sys_timer_gettime
+       .long sys_timer_getoverrun
+       .long sys_timer_delete
+       .long sys_clock_settime
+       .long sys_clock_gettime         /* 265 */
+       .long sys_clock_getres
+       .long sys_clock_nanosleep
+       .long sys_statfs64
+       .long sys_fstatfs64
+       .long sys_tgkill                /* 270 */
+       .long sys_utimes
+       .long sys_fadvise64_64
+       .long sys_ni_syscall    /* sys_vserver */
+       .long sys_mbind
+       .long sys_get_mempolicy         /* 275 */
+       .long sys_set_mempolicy
+       .long sys_mq_open
+       .long sys_mq_unlink
+       .long sys_mq_timedsend
+       .long sys_mq_timedreceive       /* 280 */
+       .long sys_mq_notify
+       .long sys_mq_getsetattr
+       .long sys_kexec_load
+       .long sys_waitid
+       .long sys_ni_syscall            /* 285 */ /* available */
+       .long sys_add_key
+       .long sys_request_key
+       .long sys_keyctl
+       .long sys_cacheflush
+       .long sys_ioprio_set            /* 290 */
+       .long sys_ioprio_get
+       .long sys_inotify_init
+       .long sys_inotify_add_watch
+       .long sys_inotify_rm_watch
+       .long sys_migrate_pages         /* 295 */
+       .long sys_openat
+       .long sys_mkdirat
+       .long sys_mknodat
+       .long sys_fchownat
+       .long sys_futimesat             /* 300 */
+       .long sys_fstatat64
+       .long sys_unlinkat
+       .long sys_renameat
+       .long sys_linkat
+       .long sys_symlinkat             /* 305 */
+       .long sys_readlinkat
+       .long sys_fchmodat
+       .long sys_faccessat
+       .long sys_pselect6
+       .long sys_ppoll                 /* 310 */
+       .long sys_unshare
+       .long sys_set_robust_list
+       .long sys_get_robust_list
+       .long sys_splice
+       .long sys_sync_file_range       /* 315 */
+       .long sys_tee
+       .long sys_vmsplice
+       .long sys_move_pages
+       .long sys_getcpu
+       .long sys_epoll_pwait           /* 320 */
+       .long sys_utimensat
+       .long sys_signalfd
+       .long sys_timerfd_create
+       .long sys_eventfd
+       .long sys_fallocate             /* 325 */
+       .long sys_timerfd_settime
+       .long sys_timerfd_gettime
+
+
+nr_syscalls=(.-sys_call_table)/4
diff --git a/arch/mn10300/kernel/fpu-low.S b/arch/mn10300/kernel/fpu-low.S
new file mode 100644 (file)
index 0000000..96cfd47
--- /dev/null
@@ -0,0 +1,197 @@
+/* MN10300 Low level FPU management operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cpu-regs.h>
+
+###############################################################################
+#
+# void fpu_init_state(void)
+# - initialise the FPU
+#
+###############################################################################
+       .globl  fpu_init_state
+       .type   fpu_init_state,@function
+fpu_init_state:
+       mov     epsw,d0
+       or      EPSW_FE,epsw
+
+#ifdef CONFIG_MN10300_PROC_MN103E010
+       nop
+       nop
+       nop
+#endif
+       fmov    0,fs0
+       fmov    fs0,fs1
+       fmov    fs0,fs2
+       fmov    fs0,fs3
+       fmov    fs0,fs4
+       fmov    fs0,fs5
+       fmov    fs0,fs6
+       fmov    fs0,fs7
+       fmov    fs0,fs8
+       fmov    fs0,fs9
+       fmov    fs0,fs10
+       fmov    fs0,fs11
+       fmov    fs0,fs12
+       fmov    fs0,fs13
+       fmov    fs0,fs14
+       fmov    fs0,fs15
+       fmov    fs0,fs16
+       fmov    fs0,fs17
+       fmov    fs0,fs18
+       fmov    fs0,fs19
+       fmov    fs0,fs20
+       fmov    fs0,fs21
+       fmov    fs0,fs22
+       fmov    fs0,fs23
+       fmov    fs0,fs24
+       fmov    fs0,fs25
+       fmov    fs0,fs26
+       fmov    fs0,fs27
+       fmov    fs0,fs28
+       fmov    fs0,fs29
+       fmov    fs0,fs30
+       fmov    fs0,fs31
+       fmov    FPCR_INIT,fpcr
+
+#ifdef CONFIG_MN10300_PROC_MN103E010
+       nop
+       nop
+       nop
+#endif
+       mov     d0,epsw
+       ret     [],0
+
+       .size   fpu_init_state,.-fpu_init_state
+
+###############################################################################
+#
+# void fpu_save(struct fpu_state_struct *)
+# - save the fpu state
+# - note that an FPU Operational exception might occur during this process
+#
+###############################################################################
+       .globl  fpu_save
+       .type   fpu_save,@function
+fpu_save:
+       mov     epsw,d1
+       or      EPSW_FE,epsw            /* enable the FPU so we can access it */
+
+#ifdef CONFIG_MN10300_PROC_MN103E010
+       nop
+       nop
+#endif
+       mov     d0,a0
+       fmov    fs0,(a0+)
+       fmov    fs1,(a0+)
+       fmov    fs2,(a0+)
+       fmov    fs3,(a0+)
+       fmov    fs4,(a0+)
+       fmov    fs5,(a0+)
+       fmov    fs6,(a0+)
+       fmov    fs7,(a0+)
+       fmov    fs8,(a0+)
+       fmov    fs9,(a0+)
+       fmov    fs10,(a0+)
+       fmov    fs11,(a0+)
+       fmov    fs12,(a0+)
+       fmov    fs13,(a0+)
+       fmov    fs14,(a0+)
+       fmov    fs15,(a0+)
+       fmov    fs16,(a0+)
+       fmov    fs17,(a0+)
+       fmov    fs18,(a0+)
+       fmov    fs19,(a0+)
+       fmov    fs20,(a0+)
+       fmov    fs21,(a0+)
+       fmov    fs22,(a0+)
+       fmov    fs23,(a0+)
+       fmov    fs24,(a0+)
+       fmov    fs25,(a0+)
+       fmov    fs26,(a0+)
+       fmov    fs27,(a0+)
+       fmov    fs28,(a0+)
+       fmov    fs29,(a0+)
+       fmov    fs30,(a0+)
+       fmov    fs31,(a0+)
+       fmov    fpcr,d0
+       mov     d0,(a0)
+#ifdef CONFIG_MN10300_PROC_MN103E010
+       nop
+       nop
+#endif
+
+       mov     d1,epsw
+       ret     [],0
+
+       .size   fpu_save,.-fpu_save
+
+###############################################################################
+#
+# void fpu_restore(struct fpu_state_struct *)
+# - restore the fpu state
+# - note that an FPU Operational exception might occur during this process
+#
+###############################################################################
+       .globl  fpu_restore
+       .type   fpu_restore,@function
+fpu_restore:
+       mov     epsw,d1
+       or      EPSW_FE,epsw            /* enable the FPU so we can access it */
+
+#ifdef CONFIG_MN10300_PROC_MN103E010
+       nop
+       nop
+#endif
+       mov     d0,a0
+       fmov    (a0+),fs0
+       fmov    (a0+),fs1
+       fmov    (a0+),fs2
+       fmov    (a0+),fs3
+       fmov    (a0+),fs4
+       fmov    (a0+),fs5
+       fmov    (a0+),fs6
+       fmov    (a0+),fs7
+       fmov    (a0+),fs8
+       fmov    (a0+),fs9
+       fmov    (a0+),fs10
+       fmov    (a0+),fs11
+       fmov    (a0+),fs12
+       fmov    (a0+),fs13
+       fmov    (a0+),fs14
+       fmov    (a0+),fs15
+       fmov    (a0+),fs16
+       fmov    (a0+),fs17
+       fmov    (a0+),fs18
+       fmov    (a0+),fs19
+       fmov    (a0+),fs20
+       fmov    (a0+),fs21
+       fmov    (a0+),fs22
+       fmov    (a0+),fs23
+       fmov    (a0+),fs24
+       fmov    (a0+),fs25
+       fmov    (a0+),fs26
+       fmov    (a0+),fs27
+       fmov    (a0+),fs28
+       fmov    (a0+),fs29
+       fmov    (a0+),fs30
+       fmov    (a0+),fs31
+       mov     (a0),d0
+       fmov    d0,fpcr
+#ifdef CONFIG_MN10300_PROC_MN103E010
+       nop
+       nop
+       nop
+#endif
+
+       mov     d1,epsw
+       ret     [],0
+
+       .size   fpu_restore,.-fpu_restore
diff --git a/arch/mn10300/kernel/fpu.c b/arch/mn10300/kernel/fpu.c
new file mode 100644 (file)
index 0000000..e705f25
--- /dev/null
@@ -0,0 +1,223 @@
+/* MN10300 FPU management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/uaccess.h>
+#include <asm/fpu.h>
+#include <asm/elf.h>
+#include <asm/exceptions.h>
+
+struct task_struct *fpu_state_owner;
+
+/*
+ * handle an exception due to the FPU being disabled
+ */
+asmlinkage void fpu_disabled(struct pt_regs *regs, enum exception_code code)
+{
+       struct task_struct *tsk = current;
+
+       if (!user_mode(regs))
+               die_if_no_fixup("An FPU Disabled exception happened in"
+                               " kernel space\n",
+                               regs, code);
+
+#ifdef CONFIG_FPU
+       preempt_disable();
+
+       /* transfer the last process's FPU state to memory */
+       if (fpu_state_owner) {
+               fpu_save(&fpu_state_owner->thread.fpu_state);
+               fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE;
+       }
+
+       /* the current process now owns the FPU state */
+       fpu_state_owner = tsk;
+       regs->epsw |= EPSW_FE;
+
+       /* load the FPU with the current process's FPU state or invent a new
+        * clean one if the process doesn't have one */
+       if (is_using_fpu(tsk)) {
+               fpu_restore(&tsk->thread.fpu_state);
+       } else {
+               fpu_init_state();
+               set_using_fpu(tsk);
+       }
+
+       preempt_enable();
+#else
+       {
+               siginfo_t info;
+
+               info.si_signo = SIGFPE;
+               info.si_errno = 0;
+               info.si_addr = (void *) tsk->thread.uregs->pc;
+               info.si_code = FPE_FLTINV;
+
+               force_sig_info(SIGFPE, &info, tsk);
+       }
+#endif  /* CONFIG_FPU */
+}
+
+/*
+ * handle an FPU operational exception
+ * - there's a possibility that if the FPU is asynchronous, the signal might
+ *   be meant for a process other than the current one
+ */
+asmlinkage void fpu_exception(struct pt_regs *regs, enum exception_code code)
+{
+       struct task_struct *tsk = fpu_state_owner;
+       siginfo_t info;
+
+       if (!user_mode(regs))
+               die_if_no_fixup("An FPU Operation exception happened in"
+                               " kernel space\n",
+                               regs, code);
+
+       if (!tsk)
+               die_if_no_fixup("An FPU Operation exception happened,"
+                               " but the FPU is not in use",
+                               regs, code);
+
+       info.si_signo = SIGFPE;
+       info.si_errno = 0;
+       info.si_addr = (void *) tsk->thread.uregs->pc;
+       info.si_code = FPE_FLTINV;
+
+#ifdef CONFIG_FPU
+       {
+               u32 fpcr;
+
+               /* get FPCR (we need to enable the FPU whilst we do this) */
+               asm volatile("  or      %1,epsw         \n"
+#ifdef CONFIG_MN10300_PROC_MN103E010
+                            "  nop                     \n"
+                            "  nop                     \n"
+                            "  nop                     \n"
+#endif
+                            "  fmov    fpcr,%0         \n"
+#ifdef CONFIG_MN10300_PROC_MN103E010
+                            "  nop                     \n"
+                            "  nop                     \n"
+                            "  nop                     \n"
+#endif
+                            "  and     %2,epsw         \n"
+                            : "=&d"(fpcr)
+                            : "i"(EPSW_FE), "i"(~EPSW_FE)
+                            );
+
+               if (fpcr & FPCR_EC_Z)
+                       info.si_code = FPE_FLTDIV;
+               else if (fpcr & FPCR_EC_O)
+                       info.si_code = FPE_FLTOVF;
+               else if (fpcr & FPCR_EC_U)
+                       info.si_code = FPE_FLTUND;
+               else if (fpcr & FPCR_EC_I)
+                       info.si_code = FPE_FLTRES;
+       }
+#endif
+
+       force_sig_info(SIGFPE, &info, tsk);
+}
+
+/*
+ * save the FPU state to a signal context
+ */
+int fpu_setup_sigcontext(struct fpucontext *fpucontext)
+{
+#ifdef CONFIG_FPU
+       struct task_struct *tsk = current;
+
+       if (!is_using_fpu(tsk))
+               return 0;
+
+       /* transfer the current FPU state to memory and cause fpu_init() to be
+        * triggered by the next attempted FPU operation by the current
+        * process.
+        */
+       preempt_disable();
+
+       if (fpu_state_owner == tsk) {
+               fpu_save(&tsk->thread.fpu_state);
+               fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE;
+               fpu_state_owner = NULL;
+       }
+
+       preempt_enable();
+
+       /* we no longer have a valid current FPU state */
+       clear_using_fpu(tsk);
+
+       /* transfer the saved FPU state onto the userspace stack */
+       if (copy_to_user(fpucontext,
+                        &tsk->thread.fpu_state,
+                        min(sizeof(struct fpu_state_struct),
+                            sizeof(struct fpucontext))))
+               return -1;
+
+       return 1;
+#else
+       return 0;
+#endif
+}
+
+/*
+ * kill a process's FPU state during restoration after signal handling
+ */
+void fpu_kill_state(struct task_struct *tsk)
+{
+#ifdef CONFIG_FPU
+       /* disown anything left in the FPU */
+       preempt_disable();
+
+       if (fpu_state_owner == tsk) {
+               fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE;
+               fpu_state_owner = NULL;
+       }
+
+       preempt_enable();
+#endif
+       /* we no longer have a valid current FPU state */
+       clear_using_fpu(tsk);
+}
+
+/*
+ * restore the FPU state from a signal context
+ */
+int fpu_restore_sigcontext(struct fpucontext *fpucontext)
+{
+       struct task_struct *tsk = current;
+       int ret;
+
+       /* load up the old FPU state */
+       ret = copy_from_user(&tsk->thread.fpu_state,
+                            fpucontext,
+                            min(sizeof(struct fpu_state_struct),
+                                sizeof(struct fpucontext)));
+       if (!ret)
+               set_using_fpu(tsk);
+
+       return ret;
+}
+
+/*
+ * fill in the FPU structure for a core dump
+ */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpreg)
+{
+       struct task_struct *tsk = current;
+       int fpvalid;
+
+       fpvalid = is_using_fpu(tsk);
+       if (fpvalid) {
+               unlazy_fpu(tsk);
+               memcpy(fpreg, &tsk->thread.fpu_state, sizeof(*fpreg));
+       }
+
+       return fpvalid;
+}
diff --git a/arch/mn10300/kernel/gdb-cache.S b/arch/mn10300/kernel/gdb-cache.S
new file mode 100644 (file)
index 0000000..1108bad
--- /dev/null
@@ -0,0 +1,105 @@
+###############################################################################
+#
+# MN10300 Low-level cache purging routines for gdbstub
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/cache.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+#include <asm/frame.inc>
+#include <asm/serial-regs.h>
+
+       .text
+
+###############################################################################
+#
+# GDB stub cache purge
+#
+###############################################################################
+       .type   gdbstub_purge_cache,@function
+ENTRY(gdbstub_purge_cache)
+       #######################################################################
+       # read the addresses tagged in the cache's tag RAM and attempt to flush
+       # those addresses specifically
+       # - we rely on the hardware to filter out invalid tag entry addresses
+       mov     DCACHE_TAG(0,0),a0              # dcache tag RAM access address
+       mov     DCACHE_PURGE(0,0),a1            # dcache purge request address
+       mov     L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1  # total number of entries
+
+mn10300_dcache_flush_loop:
+       mov     (a0),d0
+       and     L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+       or      L1_CACHE_TAG_VALID,d0           # retain valid entries in the
+                                               # cache
+       mov     d0,(a1)                         # conditional purge
+
+mn10300_dcache_flush_skip:
+       add     L1_CACHE_BYTES,a0
+       add     L1_CACHE_BYTES,a1
+       add     -1,d1
+       bne     mn10300_dcache_flush_loop
+
+;;     # unconditionally flush and invalidate the dcache
+;;     mov     DCACHE_PURGE(0,0),a1            # dcache purge request address
+;;     mov     L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1     # total number of
+;;                                                     # entries
+;;
+;; gdbstub_purge_cache__dcache_loop:
+;;     mov     (a1),d0                         # unconditional purge
+;;
+;;     add     L1_CACHE_BYTES,a1
+;;     add     -1,d1
+;;     bne     gdbstub_purge_cache__dcache_loop
+
+       #######################################################################
+       # now invalidate the icache
+       mov     CHCTR,a0
+       movhu   (a0),a1
+
+       mov     epsw,d1
+       and     ~EPSW_IE,epsw
+       nop
+       nop
+
+       # disable the icache
+       and     ~CHCTR_ICEN,d0
+       movhu   d0,(a0)
+
+       # and wait for it to calm down
+       setlb
+       movhu   (a0),d0
+       btst    CHCTR_ICBUSY,d0
+       lne
+
+       # invalidate
+       or      CHCTR_ICINV,d0
+       movhu   d0,(a0)
+
+       # wait for the cache to finish
+       mov     CHCTR,a0
+       setlb
+       movhu   (a0),d0
+       btst    CHCTR_ICBUSY,d0
+       lne
+
+       # and reenable it
+       movhu   a1,(a0)
+       movhu   (a0),d0                 # read back to flush
+                                       # (SIGILLs all over without this)
+
+       mov     d1,epsw
+
+       ret     [],0
+
+       .size   gdbstub_purge_cache,.-gdbstub_purge_cache
diff --git a/arch/mn10300/kernel/gdb-io-serial-low.S b/arch/mn10300/kernel/gdb-io-serial-low.S
new file mode 100644 (file)
index 0000000..c68dcd0
--- /dev/null
@@ -0,0 +1,90 @@
+###############################################################################
+#
+# 16550 serial Rx interrupt handler for gdbstub I/O
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/cpu-regs.h>
+#include <asm/thread_info.h>
+#include <asm/frame.inc>
+#include <asm/intctl-regs.h>
+#include <asm/unit/serial.h>
+
+       .text
+
+###############################################################################
+#
+# GDB stub serial receive interrupt entry point
+# - intended to run at interrupt priority 0
+#
+###############################################################################
+       .globl  gdbstub_io_rx_handler
+       .type   gdbstub_io_rx_handler,@function
+gdbstub_io_rx_handler:
+       movm    [d2,d3,a2,a3],(sp)
+
+#if 1
+       movbu   (GDBPORT_SERIAL_IIR),d2
+#endif
+
+       mov     (gdbstub_rx_inp),a3
+gdbstub_io_rx_more:
+       mov     a3,a2
+       add     2,a3
+       and     0x00000fff,a3
+       mov     (gdbstub_rx_outp),d3
+       cmp     a3,d3
+       beq     gdbstub_io_rx_overflow
+
+       movbu   (GDBPORT_SERIAL_LSR),d3
+       btst    UART_LSR_DR,d3
+       beq     gdbstub_io_rx_done
+       movbu   (GDBPORT_SERIAL_RX),d2
+       movbu   d3,(gdbstub_rx_buffer+1,a2)
+       movbu   d2,(gdbstub_rx_buffer,a2)
+       mov     a3,(gdbstub_rx_inp)
+       bra     gdbstub_io_rx_more
+
+gdbstub_io_rx_done:
+       mov     GxICR_DETECT,d2
+       movbu   d2,(XIRQxICR(GDBPORT_SERIAL_IRQ))       # ACK the interrupt
+       movhu   (XIRQxICR(GDBPORT_SERIAL_IRQ)),d2       # flush
+       movm    (sp),[d2,d3,a2,a3]
+       bset    0x01,(gdbstub_busy)
+       beq     gdbstub_io_rx_enter
+       rti
+
+gdbstub_io_rx_overflow:
+       bset    0x01,(gdbstub_rx_overflow)
+       bra     gdbstub_io_rx_done
+
+gdbstub_io_rx_enter:
+       or      EPSW_IE|EPSW_IM_1,epsw
+       add     -4,sp
+       SAVE_ALL
+
+       mov     0xffffffff,d0
+       mov     d0,(REG_ORIG_D0,fp)
+       mov     0x280,d1
+
+       mov     fp,d0
+       call    gdbstub_rx_irq[],0      # gdbstub_rx_irq(regs,excep)
+
+       and     ~EPSW_IE,epsw
+       bclr    0x01,(gdbstub_busy)
+
+       .globl gdbstub_return
+gdbstub_return:
+       RESTORE_ALL
+
+       .size   gdbstub_io_rx_handler,.-gdbstub_io_rx_handler
diff --git a/arch/mn10300/kernel/gdb-io-serial.c b/arch/mn10300/kernel/gdb-io-serial.c
new file mode 100644 (file)
index 0000000..9a6d4e8
--- /dev/null
@@ -0,0 +1,155 @@
+/* 16550 serial driver for gdbstub I/O
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/nmi.h>
+
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/gdb-stub.h>
+#include <asm/exceptions.h>
+#include <asm/serial-regs.h>
+#include <asm/unit/serial.h>
+
+/*
+ * initialise the GDB stub
+ */
+void gdbstub_io_init(void)
+{
+       u16 tmp;
+
+       /* set up the serial port */
+       GDBPORT_SERIAL_LCR = UART_LCR_WLEN8; /* 1N8 */
+       GDBPORT_SERIAL_FCR = (UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
+                             UART_FCR_CLEAR_XMIT);
+
+       FLOWCTL_CLEAR(DTR);
+       FLOWCTL_SET(RTS);
+
+       gdbstub_io_set_baud(115200);
+
+       /* we want to get serial receive interrupts */
+       XIRQxICR(GDBPORT_SERIAL_IRQ) = 0;
+       tmp = XIRQxICR(GDBPORT_SERIAL_IRQ);
+
+       IVAR0 = EXCEP_IRQ_LEVEL0;
+       set_intr_stub(EXCEP_IRQ_LEVEL0, gdbstub_io_rx_handler);
+
+       XIRQxICR(GDBPORT_SERIAL_IRQ) &= ~GxICR_REQUEST;
+       XIRQxICR(GDBPORT_SERIAL_IRQ) = GxICR_ENABLE | GxICR_LEVEL_0;
+       tmp = XIRQxICR(GDBPORT_SERIAL_IRQ);
+
+       GDBPORT_SERIAL_IER = UART_IER_RDI | UART_IER_RLSI;
+
+       /* permit level 0 IRQs to take place */
+       asm volatile(
+               "       and %0,epsw     \n"
+               "       or %1,epsw      \n"
+               :
+               : "i"(~EPSW_IM), "i"(EPSW_IE | EPSW_IM_1)
+               );
+}
+
+/*
+ * set up the GDB stub serial port baud rate timers
+ */
+void gdbstub_io_set_baud(unsigned baud)
+{
+       unsigned value;
+       u8 lcr;
+
+       value = 18432000 / 16 / baud;
+
+       lcr = GDBPORT_SERIAL_LCR;
+       GDBPORT_SERIAL_LCR |= UART_LCR_DLAB;
+       GDBPORT_SERIAL_DLL = value & 0xff;
+       GDBPORT_SERIAL_DLM = (value >> 8) & 0xff;
+       GDBPORT_SERIAL_LCR = lcr;
+}
+
+/*
+ * wait for a character to come from the debugger
+ */
+int gdbstub_io_rx_char(unsigned char *_ch, int nonblock)
+{
+       unsigned ix;
+       u8 ch, st;
+
+       *_ch = 0xff;
+
+       if (gdbstub_rx_unget) {
+               *_ch = gdbstub_rx_unget;
+               gdbstub_rx_unget = 0;
+               return 0;
+       }
+
+ try_again:
+       /* pull chars out of the buffer */
+       ix = gdbstub_rx_outp;
+       if (ix == gdbstub_rx_inp) {
+               if (nonblock)
+                       return -EAGAIN;
+#ifdef CONFIG_MN10300_WD_TIMER
+               watchdog_alert_counter = 0;
+#endif /* CONFIG_MN10300_WD_TIMER */
+               goto try_again;
+       }
+
+       ch = gdbstub_rx_buffer[ix++];
+       st = gdbstub_rx_buffer[ix++];
+       gdbstub_rx_outp = ix & 0x00000fff;
+
+       if (st & UART_LSR_BI) {
+               gdbstub_proto("### GDB Rx Break Detected ###\n");
+               return -EINTR;
+       } else if (st & (UART_LSR_FE | UART_LSR_OE | UART_LSR_PE)) {
+               gdbstub_proto("### GDB Rx Error (st=%02x) ###\n", st);
+               return -EIO;
+       } else {
+               gdbstub_proto("### GDB Rx %02x (st=%02x) ###\n", ch, st);
+               *_ch = ch & 0x7f;
+               return 0;
+       }
+}
+
+/*
+ * send a character to the debugger
+ */
+void gdbstub_io_tx_char(unsigned char ch)
+{
+       FLOWCTL_SET(DTR);
+       LSR_WAIT_FOR(THRE);
+       /* FLOWCTL_WAIT_FOR(CTS); */
+
+       if (ch == 0x0a) {
+               GDBPORT_SERIAL_TX = 0x0d;
+               LSR_WAIT_FOR(THRE);
+               /* FLOWCTL_WAIT_FOR(CTS); */
+       }
+       GDBPORT_SERIAL_TX = ch;
+
+       FLOWCTL_CLEAR(DTR);
+}
+
+/*
+ * send a character to the debugger
+ */
+void gdbstub_io_tx_flush(void)
+{
+       LSR_WAIT_FOR(TEMT);
+       LSR_WAIT_FOR(THRE);
+       FLOWCTL_CLEAR(DTR);
+}
diff --git a/arch/mn10300/kernel/gdb-io-ttysm-low.S b/arch/mn10300/kernel/gdb-io-ttysm-low.S
new file mode 100644 (file)
index 0000000..677c787
--- /dev/null
@@ -0,0 +1,93 @@
+###############################################################################
+#
+# MN10300 On-chip serial Rx interrupt handler for GDB stub I/O
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/thread_info.h>
+#include <asm/cpu-regs.h>
+#include <asm/frame.inc>
+#include <asm/intctl-regs.h>
+#include <asm/unit/serial.h>
+#include "mn10300-serial.h"
+
+       .text
+
+###############################################################################
+#
+# GDB stub serial receive interrupt entry point
+# - intended to run at interrupt priority 0
+#
+###############################################################################
+       .globl  gdbstub_io_rx_handler
+       .type   gdbstub_io_rx_handler,@function
+gdbstub_io_rx_handler:
+       movm    [d2,d3,a2,a3],(sp)
+
+       mov     (gdbstub_rx_inp),a3
+gdbstub_io_rx_more:
+       mov     a3,a2
+       add     2,a3
+       and     PAGE_SIZE_asm-1,a3
+       mov     (gdbstub_rx_outp),d3
+       cmp     a3,d3
+       beq     gdbstub_io_rx_overflow
+
+       movbu   (SCgSTR),d3
+       btst    SC01STR_RBF,d3
+       beq     gdbstub_io_rx_done
+       movbu   (SCgRXB),d2
+       movbu   d3,(gdbstub_rx_buffer+1,a2)
+       movbu   d2,(gdbstub_rx_buffer,a2)
+       mov     a3,(gdbstub_rx_inp)
+       bra     gdbstub_io_rx_more
+
+gdbstub_io_rx_done:
+       mov     GxICR_DETECT,d2
+       movbu   d2,(GxICR(SCgRXIRQ))    # ACK the interrupt
+       movhu   (GxICR(SCgRXIRQ)),d2    # flush
+
+       movm    (sp),[d2,d3,a2,a3]
+       bset    0x01,(gdbstub_busy)
+       beq     gdbstub_io_rx_enter
+       rti
+
+gdbstub_io_rx_overflow:
+       bset    0x01,(gdbstub_rx_overflow)
+       bra     gdbstub_io_rx_done
+
+###############################################################################
+#
+# debugging interrupt - enter the GDB stub proper
+#
+###############################################################################
+gdbstub_io_rx_enter:
+       or      EPSW_IE|EPSW_IM_1,epsw
+       add     -4,sp
+       SAVE_ALL
+
+       mov     0xffffffff,d0
+       mov     d0,(REG_ORIG_D0,fp)
+       mov     0x280,d1
+
+       mov     fp,d0
+       call    gdbstub_rx_irq[],0      # gdbstub_io_rx_irq(regs,excep)
+
+       and     ~EPSW_IE,epsw
+       bclr    0x01,(gdbstub_busy)
+
+       .globl gdbstub_return
+gdbstub_return:
+       RESTORE_ALL
+
+       .size   gdbstub_io_rx_handler,.-gdbstub_io_rx_handler
diff --git a/arch/mn10300/kernel/gdb-io-ttysm.c b/arch/mn10300/kernel/gdb-io-ttysm.c
new file mode 100644 (file)
index 0000000..c545159
--- /dev/null
@@ -0,0 +1,299 @@
+/* MN10300 On-chip serial driver for gdbstub I/O
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/gdb-stub.h>
+#include <asm/exceptions.h>
+#include <asm/unit/clock.h>
+#include "mn10300-serial.h"
+
+#if defined(CONFIG_GDBSTUB_ON_TTYSM0)
+struct mn10300_serial_port *const gdbstub_port = &mn10300_serial_port_sif0;
+#elif defined(CONFIG_GDBSTUB_ON_TTYSM1)
+struct mn10300_serial_port *const gdbstub_port = &mn10300_serial_port_sif1;
+#else
+struct mn10300_serial_port *const gdbstub_port = &mn10300_serial_port_sif2;
+#endif
+
+
+/*
+ * initialise the GDB stub I/O routines
+ */
+void __init gdbstub_io_init(void)
+{
+       uint16_t scxctr;
+       int tmp;
+
+       switch (gdbstub_port->clock_src) {
+       case MNSCx_CLOCK_SRC_IOCLK:
+               gdbstub_port->ioclk = MN10300_IOCLK;
+               break;
+
+#ifdef MN10300_IOBCLK
+       case MNSCx_CLOCK_SRC_IOBCLK:
+               gdbstub_port->ioclk = MN10300_IOBCLK;
+               break;
+#endif
+       default:
+               BUG();
+       }
+
+       /* set up the serial port */
+       gdbstub_io_set_baud(115200);
+
+       /* we want to get serial receive interrupts */
+       set_intr_level(gdbstub_port->rx_irq, GxICR_LEVEL_0);
+       set_intr_level(gdbstub_port->tx_irq, GxICR_LEVEL_0);
+       set_intr_stub(EXCEP_IRQ_LEVEL0, gdbstub_io_rx_handler);
+
+       *gdbstub_port->rx_icr |= GxICR_ENABLE;
+       tmp = *gdbstub_port->rx_icr;
+
+       /* enable the device */
+       scxctr = SC01CTR_CLN_8BIT;      /* 1N8 */
+       switch (gdbstub_port->div_timer) {
+       case MNSCx_DIV_TIMER_16BIT:
+               scxctr |= SC0CTR_CK_TM8UFLOW_8; /* == SC1CTR_CK_TM9UFLOW_8
+                                                  == SC2CTR_CK_TM10UFLOW_8 */
+               break;
+
+       case MNSCx_DIV_TIMER_8BIT:
+               scxctr |= SC0CTR_CK_TM2UFLOW_8;
+               break;
+       }
+
+       scxctr |= SC01CTR_TXE | SC01CTR_RXE;
+
+       *gdbstub_port->_control = scxctr;
+       tmp = *gdbstub_port->_control;
+
+       /* permit level 0 IRQs only */
+       asm volatile(
+               "       and %0,epsw     \n"
+               "       or %1,epsw      \n"
+               :
+               : "i"(~EPSW_IM), "i"(EPSW_IE|EPSW_IM_1)
+               );
+}
+
+/*
+ * set up the GDB stub serial port baud rate timers
+ */
+void gdbstub_io_set_baud(unsigned baud)
+{
+       const unsigned bits = 10; /* 1 [start] + 8 [data] + 0 [parity] +
+                                  * 1 [stop] */
+       unsigned long ioclk = gdbstub_port->ioclk;
+       unsigned xdiv, tmp;
+       uint16_t tmxbr;
+       uint8_t tmxmd;
+
+       if (!baud) {
+               baud = 9600;
+       } else if (baud == 134) {
+               baud = 269;     /* 134 is really 134.5 */
+               xdiv = 2;
+       }
+
+try_alternative:
+       xdiv = 1;
+
+       switch (gdbstub_port->div_timer) {
+       case MNSCx_DIV_TIMER_16BIT:
+               tmxmd = TM8MD_SRC_IOCLK;
+               tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1;
+               if (tmp > 0 && tmp <= 65535)
+                       goto timer_okay;
+
+               tmxmd = TM8MD_SRC_IOCLK_8;
+               tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1;
+               if (tmp > 0 && tmp <= 65535)
+                       goto timer_okay;
+
+               tmxmd = TM8MD_SRC_IOCLK_32;
+               tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1;
+               if (tmp > 0 && tmp <= 65535)
+                       goto timer_okay;
+
+               break;
+
+       case MNSCx_DIV_TIMER_8BIT:
+               tmxmd = TM2MD_SRC_IOCLK;
+               tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1;
+               if (tmp > 0 && tmp <= 255)
+                       goto timer_okay;
+
+               tmxmd = TM2MD_SRC_IOCLK_8;
+               tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1;
+               if (tmp > 0 && tmp <= 255)
+                       goto timer_okay;
+
+               tmxmd = TM2MD_SRC_IOCLK_32;
+               tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1;
+               if (tmp > 0 && tmp <= 255)
+                       goto timer_okay;
+               break;
+       }
+
+       /* as a last resort, if the quotient is zero, default to 9600 bps */
+       baud = 9600;
+       goto try_alternative;
+
+timer_okay:
+       gdbstub_port->uart.timeout = (2 * bits * HZ) / baud;
+       gdbstub_port->uart.timeout += HZ / 50;
+
+       /* set the timer to produce the required baud rate */
+       switch (gdbstub_port->div_timer) {
+       case MNSCx_DIV_TIMER_16BIT:
+               *gdbstub_port->_tmxmd = 0;
+               *gdbstub_port->_tmxbr = tmxbr;
+               *gdbstub_port->_tmxmd = TM8MD_INIT_COUNTER;
+               *gdbstub_port->_tmxmd = tmxmd | TM8MD_COUNT_ENABLE;
+               break;
+
+       case MNSCx_DIV_TIMER_8BIT:
+               *gdbstub_port->_tmxmd = 0;
+               *(volatile u8 *) gdbstub_port->_tmxbr = (u8)tmxbr;
+               *gdbstub_port->_tmxmd = TM2MD_INIT_COUNTER;
+               *gdbstub_port->_tmxmd = tmxmd | TM2MD_COUNT_ENABLE;
+               break;
+       }
+}
+
+/*
+ * wait for a character to come from the debugger
+ */
+int gdbstub_io_rx_char(unsigned char *_ch, int nonblock)
+{
+       unsigned ix;
+       u8 ch, st;
+
+       *_ch = 0xff;
+
+       if (gdbstub_rx_unget) {
+               *_ch = gdbstub_rx_unget;
+               gdbstub_rx_unget = 0;
+               return 0;
+       }
+
+try_again:
+       /* pull chars out of the buffer */
+       ix = gdbstub_rx_outp;
+       if (ix == gdbstub_rx_inp) {
+               if (nonblock)
+                       return -EAGAIN;
+#ifdef CONFIG_MN10300_WD_TIMER
+               watchdog_alert_counter = 0;
+#endif /* CONFIG_MN10300_WD_TIMER */
+               goto try_again;
+       }
+
+       ch = gdbstub_rx_buffer[ix++];
+       st = gdbstub_rx_buffer[ix++];
+       gdbstub_rx_outp = ix & (PAGE_SIZE - 1);
+
+       st &= SC01STR_RXF | SC01STR_RBF | SC01STR_FEF | SC01STR_PEF |
+               SC01STR_OEF;
+
+       /* deal with what we've got
+        * - note that the UART doesn't do BREAK-detection for us
+        */
+       if (st & SC01STR_FEF && ch == 0) {
+               switch (gdbstub_port->rx_brk) {
+               case 0: gdbstub_port->rx_brk = 1;       goto try_again;
+               case 1: gdbstub_port->rx_brk = 2;       goto try_again;
+               case 2:
+                       gdbstub_port->rx_brk = 3;
+                       gdbstub_proto("### GDB MNSERIAL Rx Break Detected"
+                                     " ###\n");
+                       return -EINTR;
+               default:
+                       goto try_again;
+               }
+       } else if (st & SC01STR_FEF) {
+               if (gdbstub_port->rx_brk)
+                       goto try_again;
+
+               gdbstub_proto("### GDB MNSERIAL Framing Error ###\n");
+               return -EIO;
+       } else if (st & SC01STR_OEF) {
+               if (gdbstub_port->rx_brk)
+                       goto try_again;
+
+               gdbstub_proto("### GDB MNSERIAL Overrun Error ###\n");
+               return -EIO;
+       } else if (st & SC01STR_PEF) {
+               if (gdbstub_port->rx_brk)
+                       goto try_again;
+
+               gdbstub_proto("### GDB MNSERIAL Parity Error ###\n");
+               return -EIO;
+       } else {
+               /* look for the tail-end char on a break run */
+               if (gdbstub_port->rx_brk == 3) {
+                       switch (ch) {
+                       case 0xFF:
+                       case 0xFE:
+                       case 0xFC:
+                       case 0xF8:
+                       case 0xF0:
+                       case 0xE0:
+                       case 0xC0:
+                       case 0x80:
+                       case 0x00:
+                               gdbstub_port->rx_brk = 0;
+                               goto try_again;
+                       default:
+                               break;
+                       }
+               }
+
+               gdbstub_port->rx_brk = 0;
+               gdbstub_io("### GDB Rx %02x (st=%02x) ###\n", ch, st);
+               *_ch = ch & 0x7f;
+               return 0;
+       }
+}
+
+/*
+ * send a character to the debugger
+ */
+void gdbstub_io_tx_char(unsigned char ch)
+{
+       while (*gdbstub_port->_status & SC01STR_TBF)
+               continue;
+
+       if (ch == 0x0a) {
+               *(u8 *) gdbstub_port->_txb = 0x0d;
+               while (*gdbstub_port->_status & SC01STR_TBF)
+                       continue;
+       }
+
+       *(u8 *) gdbstub_port->_txb = ch;
+}
+
+/*
+ * flush the transmission buffers
+ */
+void gdbstub_io_tx_flush(void)
+{
+       while (*gdbstub_port->_status & (SC01STR_TBF | SC01STR_TXF))
+               continue;
+}
diff --git a/arch/mn10300/kernel/gdb-low.S b/arch/mn10300/kernel/gdb-low.S
new file mode 100644 (file)
index 0000000..e272555
--- /dev/null
@@ -0,0 +1,115 @@
+###############################################################################
+#
+# MN10300 Low-level gdbstub routines
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/cache.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+#include <asm/frame.inc>
+#include <asm/serial-regs.h>
+
+       .text
+
+###############################################################################
+#
+# GDB stub read memory with guard
+# - D0 holds the memory address to read
+# - D1 holds the address to store the byte into
+#
+###############################################################################
+       .globl gdbstub_read_byte_guard
+       .globl gdbstub_read_byte_cont
+ENTRY(gdbstub_read_byte)
+       mov     d0,a0
+       mov     d1,a1
+       clr     d0
+gdbstub_read_byte_guard:
+       movbu   (a0),d1
+gdbstub_read_byte_cont:
+       movbu   d1,(a1)
+       ret     [],0
+
+       .globl gdbstub_read_word_guard
+       .globl gdbstub_read_word_cont
+ENTRY(gdbstub_read_word)
+       mov     d0,a0
+       mov     d1,a1
+       clr     d0
+gdbstub_read_word_guard:
+       movhu   (a0),d1
+gdbstub_read_word_cont:
+       movhu   d1,(a1)
+       ret     [],0
+
+       .globl gdbstub_read_dword_guard
+       .globl gdbstub_read_dword_cont
+ENTRY(gdbstub_read_dword)
+       mov     d0,a0
+       mov     d1,a1
+       clr     d0
+gdbstub_read_dword_guard:
+       mov     (a0),d1
+gdbstub_read_dword_cont:
+       mov     d1,(a1)
+       ret     [],0
+
+###############################################################################
+#
+# GDB stub write memory with guard
+# - D0 holds the byte to store
+# - D1 holds the memory address to write
+#
+###############################################################################
+       .globl gdbstub_write_byte_guard
+       .globl gdbstub_write_byte_cont
+ENTRY(gdbstub_write_byte)
+       mov     d0,a0
+       mov     d1,a1
+       clr     d0
+gdbstub_write_byte_guard:
+       movbu   a0,(a1)
+gdbstub_write_byte_cont:
+       ret     [],0
+
+       .globl gdbstub_write_word_guard
+       .globl gdbstub_write_word_cont
+ENTRY(gdbstub_write_word)
+       mov     d0,a0
+       mov     d1,a1
+       clr     d0
+gdbstub_write_word_guard:
+       movhu   a0,(a1)
+gdbstub_write_word_cont:
+       ret     [],0
+
+       .globl gdbstub_write_dword_guard
+       .globl gdbstub_write_dword_cont
+ENTRY(gdbstub_write_dword)
+       mov     d0,a0
+       mov     d1,a1
+       clr     d0
+gdbstub_write_dword_guard:
+       mov     a0,(a1)
+gdbstub_write_dword_cont:
+       ret     [],0
+
+###############################################################################
+#
+# GDB stub BUG() trap
+#
+###############################################################################
+ENTRY(__gdbstub_bug_trap)
+       .byte   0xF7,0xF7       # don't use 0xFF as the JTAG unit preempts that
+       ret     [],0
diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c
new file mode 100644 (file)
index 0000000..21891c7
--- /dev/null
@@ -0,0 +1,1947 @@
+/* MN10300 GDB stub
+ *
+ * Originally written by Glenn Engel, Lake Stevens Instrument Division
+ *
+ * Contributed by HP Systems
+ *
+ * Modified for SPARC by Stu Grossman, Cygnus Support.
+ *
+ * Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
+ * Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
+ *
+ * Copyright (C) 1995 Andreas Busse
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified for Linux/mn10300 by David Howells <dhowells@redhat.com>
+ */
+
+/*
+ *  To enable debugger support, two things need to happen.  One, a
+ *  call to set_debug_traps() is necessary in order to allow any breakpoints
+ *  or error conditions to be properly intercepted and reported to gdb.
+ *  Two, a breakpoint needs to be generated to begin communication.  This
+ *  is most easily accomplished by a call to breakpoint().  Breakpoint()
+ *  simulates a breakpoint by executing a BREAK instruction.
+ *
+ *
+ *    The following gdb commands are supported:
+ *
+ * command          function                               Return value
+ *
+ *    g             return the value of the CPU registers  hex data or ENN
+ *    G             set the value of the CPU registers     OK or ENN
+ *
+ *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
+ *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
+ *
+ *    c             Resume at current address              SNN   ( signal NN)
+ *    cAA..AA       Continue at address AA..AA             SNN
+ *
+ *    s             Step one instruction                   SNN
+ *    sAA..AA       Step one instruction from AA..AA       SNN
+ *
+ *    k             kill
+ *
+ *    ?             What was the last sigval ?             SNN   (signal NN)
+ *
+ *    bBB..BB      Set baud rate to BB..BB                OK or BNN, then sets
+ *                                                        baud rate
+ *
+ * All commands and responses are sent with a packet which includes a
+ * checksum.  A packet consists of
+ *
+ * $<packet info>#<checksum>.
+ *
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum>    :: < two hex digits computed as modulo 256 sum of <packetinfo>>
+ *
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer.  '-' indicates a failed transfer.
+ *
+ * Example:
+ *
+ * Host:                  Reply:
+ * $m0,10#2a               +$00010203040506070809101112131415#42
+ *
+ *
+ *  ==============
+ *  MORE EXAMPLES:
+ *  ==============
+ *
+ *  For reference -- the following are the steps that one
+ *  company took (RidgeRun Inc) to get remote gdb debugging
+ *  going. In this scenario the host machine was a PC and the
+ *  target platform was a Galileo EVB64120A MIPS evaluation
+ *  board.
+ *
+ *  Step 1:
+ *  First download gdb-5.0.tar.gz from the internet.
+ *  and then build/install the package.
+ *
+ *  Example:
+ *    $ tar zxf gdb-5.0.tar.gz
+ *    $ cd gdb-5.0
+ *    $ ./configure --target=am33_2.0-linux-gnu
+ *    $ make
+ *    $ install
+ *    am33_2.0-linux-gnu-gdb
+ *
+ *  Step 2:
+ *  Configure linux for remote debugging and build it.
+ *
+ *  Example:
+ *    $ cd ~/linux
+ *    $ make menuconfig <go to "Kernel Hacking" and turn on remote debugging>
+ *    $ make dep; make vmlinux
+ *
+ *  Step 3:
+ *  Download the kernel to the remote target and start
+ *  the kernel running. It will promptly halt and wait
+ *  for the host gdb session to connect. It does this
+ *  since the "Kernel Hacking" option has defined
+ *  CONFIG_REMOTE_DEBUG which in turn enables your calls
+ *  to:
+ *     set_debug_traps();
+ *     breakpoint();
+ *
+ *  Step 4:
+ *  Start the gdb session on the host.
+ *
+ *  Example:
+ *    $ am33_2.0-linux-gnu-gdb vmlinux
+ *    (gdb) set remotebaud 115200
+ *    (gdb) target remote /dev/ttyS1
+ *    ...at this point you are connected to
+ *       the remote target and can use gdb
+ *       in the normal fasion. Setting
+ *       breakpoints, single stepping,
+ *       printing variables, etc.
+ *
+ */
+
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/bug.h>
+
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/gdb-stub.h>
+#include <asm/exceptions.h>
+#include <asm/cacheflush.h>
+#include <asm/serial-regs.h>
+#include <asm/busctl-regs.h>
+#include <asm/unit/leds.h>
+#include <asm/unit/serial.h>
+
+/* define to use F7F7 rather than FF which is subverted by JTAG debugger */
+#undef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+
+/*
+ * BUFMAX defines the maximum number of characters in inbound/outbound buffers
+ * at least NUMREGBYTES*2 are needed for register packets
+ */
+#define BUFMAX 2048
+
+static const char gdbstub_banner[] =
+       "Linux/MN10300 GDB Stub (c) RedHat 2007\n";
+
+u8     gdbstub_rx_buffer[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE)));
+u32    gdbstub_rx_inp;
+u32    gdbstub_rx_outp;
+u8     gdbstub_busy;
+u8     gdbstub_rx_overflow;
+u8     gdbstub_rx_unget;
+
+static u8      gdbstub_flush_caches;
+static char    input_buffer[BUFMAX];
+static char    output_buffer[BUFMAX];
+static char    trans_buffer[BUFMAX];
+
+static const char hexchars[] = "0123456789abcdef";
+
+struct gdbstub_bkpt {
+       u8      *addr;          /* address of breakpoint */
+       u8      len;            /* size of breakpoint */
+       u8      origbytes[7];   /* original bytes */
+};
+
+static struct gdbstub_bkpt gdbstub_bkpts[256];
+
+/*
+ * local prototypes
+ */
+static void getpacket(char *buffer);
+static int putpacket(char *buffer);
+static int computeSignal(enum exception_code excep);
+static int hex(unsigned char ch);
+static int hexToInt(char **ptr, int *intValue);
+static unsigned char *mem2hex(const void *mem, char *buf, int count,
+                             int may_fault);
+static const char *hex2mem(const char *buf, void *_mem, int count,
+                          int may_fault);
+
+/*
+ * Convert ch from a hex digit to an int
+ */
+static int hex(unsigned char ch)
+{
+       if (ch >= 'a' && ch <= 'f')
+               return ch - 'a' + 10;
+       if (ch >= '0' && ch <= '9')
+               return ch - '0';
+       if (ch >= 'A' && ch <= 'F')
+               return ch - 'A' + 10;
+       return -1;
+}
+
+#ifdef CONFIG_GDBSTUB_DEBUGGING
+
+void debug_to_serial(const char *p, int n)
+{
+       __debug_to_serial(p, n);
+       /* gdbstub_console_write(NULL, p, n); */
+}
+
+void gdbstub_printk(const char *fmt, ...)
+{
+       va_list args;
+       int len;
+
+       /* Emit the output into the temporary buffer */
+       va_start(args, fmt);
+       len = vsnprintf(trans_buffer, sizeof(trans_buffer), fmt, args);
+       va_end(args);
+       debug_to_serial(trans_buffer, len);
+}
+
+#endif
+
+static inline char *gdbstub_strcpy(char *dst, const char *src)
+{
+       int loop = 0;
+       while ((dst[loop] = src[loop]))
+              loop++;
+       return dst;
+}
+
+/*
+ * scan for the sequence $<data>#<checksum>
+ */
+static void getpacket(char *buffer)
+{
+       unsigned char checksum;
+       unsigned char xmitcsum;
+       unsigned char ch;
+       int count, i, ret, error;
+
+       for (;;) {
+               /*
+                * wait around for the start character,
+                * ignore all other characters
+                */
+               do {
+                       gdbstub_io_rx_char(&ch, 0);
+               } while (ch != '$');
+
+               checksum = 0;
+               xmitcsum = -1;
+               count = 0;
+               error = 0;
+
+               /*
+                * now, read until a # or end of buffer is found
+                */
+               while (count < BUFMAX) {
+                       ret = gdbstub_io_rx_char(&ch, 0);
+                       if (ret < 0)
+                               error = ret;
+
+                       if (ch == '#')
+                               break;
+                       checksum += ch;
+                       buffer[count] = ch;
+                       count++;
+               }
+
+               if (error == -EIO) {
+                       gdbstub_proto("### GDB Rx Error - Skipping packet"
+                                     " ###\n");
+                       gdbstub_proto("### GDB Tx NAK\n");
+                       gdbstub_io_tx_char('-');
+                       continue;
+               }
+
+               if (count >= BUFMAX || error)
+                       continue;
+
+               buffer[count] = 0;
+
+               /* read the checksum */
+               ret = gdbstub_io_rx_char(&ch, 0);
+               if (ret < 0)
+                       error = ret;
+               xmitcsum = hex(ch) << 4;
+
+               ret = gdbstub_io_rx_char(&ch, 0);
+               if (ret < 0)
+                       error = ret;
+               xmitcsum |= hex(ch);
+
+               if (error) {
+                       if (error == -EIO)
+                               gdbstub_io("### GDB Rx Error -"
+                                          " Skipping packet\n");
+                       gdbstub_io("### GDB Tx NAK\n");
+                       gdbstub_io_tx_char('-');
+                       continue;
+               }
+
+               /* check the checksum */
+               if (checksum != xmitcsum) {
+                       gdbstub_io("### GDB Tx NAK\n");
+                       gdbstub_io_tx_char('-');        /* failed checksum */
+                       continue;
+               }
+
+               gdbstub_proto("### GDB Rx '$%s#%02x' ###\n", buffer, checksum);
+               gdbstub_io("### GDB Tx ACK\n");
+               gdbstub_io_tx_char('+'); /* successful transfer */
+
+               /*
+                * if a sequence char is present,
+                * reply the sequence ID
+                */
+               if (buffer[2] == ':') {
+                       gdbstub_io_tx_char(buffer[0]);
+                       gdbstub_io_tx_char(buffer[1]);
+
+                       /*
+                        * remove sequence chars from buffer
+                        */
+                       count = 0;
+                       while (buffer[count])
+                               count++;
+                       for (i = 3; i <= count; i++)
+                               buffer[i - 3] = buffer[i];
+               }
+
+               break;
+       }
+}
+
+/*
+ * send the packet in buffer.
+ * - return 0 if successfully ACK'd
+ * - return 1 if abandoned due to new incoming packet
+ */
+static int putpacket(char *buffer)
+{
+       unsigned char checksum;
+       unsigned char ch;
+       int count;
+
+       /*
+        * $<packet info>#<checksum>.
+        */
+       gdbstub_proto("### GDB Tx $'%s'#?? ###\n", buffer);
+
+       do {
+               gdbstub_io_tx_char('$');
+               checksum = 0;
+               count = 0;
+
+               while ((ch = buffer[count]) != 0) {
+                       gdbstub_io_tx_char(ch);
+                       checksum += ch;
+                       count += 1;
+               }
+
+               gdbstub_io_tx_char('#');
+               gdbstub_io_tx_char(hexchars[checksum >> 4]);
+               gdbstub_io_tx_char(hexchars[checksum & 0xf]);
+
+       } while (gdbstub_io_rx_char(&ch, 0),
+                ch == '-' && (gdbstub_io("### GDB Rx NAK\n"), 0),
+                ch != '-' && ch != '+' &&
+                (gdbstub_io("### GDB Rx ??? %02x\n", ch), 0),
+                ch != '+' && ch != '$');
+
+       if (ch == '+') {
+               gdbstub_io("### GDB Rx ACK\n");
+               return 0;
+       }
+
+       gdbstub_io("### GDB Tx Abandoned\n");
+       gdbstub_rx_unget = ch;
+       return 1;
+}
+
+/*
+ * While we find nice hex chars, build an int.
+ * Return number of chars processed.
+ */
+static int hexToInt(char **ptr, int *intValue)
+{
+       int numChars = 0;
+       int hexValue;
+
+       *intValue = 0;
+
+       while (**ptr) {
+               hexValue = hex(**ptr);
+               if (hexValue < 0)
+                       break;
+
+               *intValue = (*intValue << 4) | hexValue;
+               numChars++;
+
+               (*ptr)++;
+       }
+
+       return (numChars);
+}
+
+/*
+ * We single-step by setting breakpoints. When an exception
+ * is handled, we need to restore the instructions hoisted
+ * when the breakpoints were set.
+ *
+ * This is where we save the original instructions.
+ */
+static struct gdb_bp_save {
+       u8      *addr;
+       u8      opcode[2];
+} step_bp[2];
+
+static const unsigned char gdbstub_insn_sizes[256] =
+{
+       /* 1  2  3  4  5  6  7  8  9  a  b  c  d  e  f */
+       1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, /* 0 */
+       1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 1 */
+       2, 2, 2, 2, 3, 3, 3, 3, 2, 2, 2, 2, 3, 3, 3, 3, /* 2 */
+       3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 1, 1, 1, 1, /* 3 */
+       1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, /* 4 */
+       1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, /* 5 */
+       1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 6 */
+       1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 7 */
+       2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 8 */
+       2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 9 */
+       2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* a */
+       2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* b */
+       0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 2, 2, /* c */
+       0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* d */
+       1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* e */
+       0, 2, 2, 2, 2, 2, 2, 4, 0, 3, 0, 4, 0, 6, 7, 1  /* f */
+};
+
+static int __gdbstub_mark_bp(u8 *addr, int ix)
+{
+       if (addr < (u8 *) 0x70000000UL)
+               return 0;
+       /* 70000000-7fffffff: vmalloc area */
+       if (addr < (u8 *) 0x80000000UL)
+               goto okay;
+       if (addr < (u8 *) 0x8c000000UL)
+               return 0;
+       /* 8c000000-93ffffff: SRAM, SDRAM */
+       if (addr < (u8 *) 0x94000000UL)
+               goto okay;
+       return 0;
+
+okay:
+       if (gdbstub_read_byte(addr + 0, &step_bp[ix].opcode[0]) < 0 ||
+           gdbstub_read_byte(addr + 1, &step_bp[ix].opcode[1]) < 0)
+               return 0;
+
+       step_bp[ix].addr = addr;
+       return 1;
+}
+
+static inline void __gdbstub_restore_bp(void)
+{
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+       if (step_bp[0].addr) {
+               gdbstub_write_byte(step_bp[0].opcode[0], step_bp[0].addr + 0);
+               gdbstub_write_byte(step_bp[0].opcode[1], step_bp[0].addr + 1);
+       }
+       if (step_bp[1].addr) {
+               gdbstub_write_byte(step_bp[1].opcode[0], step_bp[1].addr + 0);
+               gdbstub_write_byte(step_bp[1].opcode[1], step_bp[1].addr + 1);
+       }
+#else
+       if (step_bp[0].addr)
+               gdbstub_write_byte(step_bp[0].opcode[0], step_bp[0].addr + 0);
+       if (step_bp[1].addr)
+               gdbstub_write_byte(step_bp[1].opcode[0], step_bp[1].addr + 0);
+#endif
+
+       gdbstub_flush_caches = 1;
+
+       step_bp[0].addr         = NULL;
+       step_bp[0].opcode[0]    = 0;
+       step_bp[0].opcode[1]    = 0;
+       step_bp[1].addr         = NULL;
+       step_bp[1].opcode[0]    = 0;
+       step_bp[1].opcode[1]    = 0;
+}
+
+/*
+ * emulate single stepping by means of breakpoint instructions
+ */
+static int gdbstub_single_step(struct pt_regs *regs)
+{
+       unsigned size;
+       uint32_t x;
+       uint8_t cur, *pc, *sp;
+
+       step_bp[0].addr         = NULL;
+       step_bp[0].opcode[0]    = 0;
+       step_bp[0].opcode[1]    = 0;
+       step_bp[1].addr         = NULL;
+       step_bp[1].opcode[0]    = 0;
+       step_bp[1].opcode[1]    = 0;
+       x = 0;
+
+       pc = (u8 *) regs->pc;
+       sp = (u8 *) (regs + 1);
+       if (gdbstub_read_byte(pc, &cur) < 0)
+               return -EFAULT;
+
+       gdbstub_bkpt("Single Step from %p { %02x }\n", pc, cur);
+
+       gdbstub_flush_caches = 1;
+
+       size = gdbstub_insn_sizes[cur];
+       if (size > 0) {
+               if (!__gdbstub_mark_bp(pc + size, 0))
+                       goto fault;
+       } else {
+               switch (cur) {
+                       /* Bxx (d8,PC) */
+               case 0xc0:
+               case 0xc1:
+               case 0xc2:
+               case 0xc3:
+               case 0xc4:
+               case 0xc5:
+               case 0xc6:
+               case 0xc7:
+               case 0xc8:
+               case 0xc9:
+               case 0xca:
+                       if (gdbstub_read_byte(pc + 1, (u8 *) &x) < 0)
+                               goto fault;
+                       if (!__gdbstub_mark_bp(pc + 2, 0))
+                               goto fault;
+                       if ((x < 0 || x > 2) &&
+                           !__gdbstub_mark_bp(pc + (s8) x, 1))
+                               goto fault;
+                       break;
+
+                       /* LXX (d8,PC) */
+               case 0xd0:
+               case 0xd1:
+               case 0xd2:
+               case 0xd3:
+               case 0xd4:
+               case 0xd5:
+               case 0xd6:
+               case 0xd7:
+               case 0xd8:
+               case 0xd9:
+               case 0xda:
+                       if (!__gdbstub_mark_bp(pc + 1, 0))
+                               goto fault;
+                       if (regs->pc != regs->lar &&
+                           !__gdbstub_mark_bp((u8 *) regs->lar, 1))
+                               goto fault;
+                       break;
+
+                       /* SETLB - loads the next for bytes into the LIR
+                        * register */
+               case 0xdb:
+                       if (!__gdbstub_mark_bp(pc + 1, 0))
+                               goto fault;
+                       break;
+
+                       /* JMP (d16,PC) or CALL (d16,PC) */
+               case 0xcc:
+               case 0xcd:
+                       if (gdbstub_read_byte(pc + 1, ((u8 *) &x) + 0) < 0 ||
+                           gdbstub_read_byte(pc + 2, ((u8 *) &x) + 1) < 0)
+                               goto fault;
+                       if (!__gdbstub_mark_bp(pc + (s16) x, 0))
+                               goto fault;
+                       break;
+
+                       /* JMP (d32,PC) or CALL (d32,PC) */
+               case 0xdc:
+               case 0xdd:
+                       if (gdbstub_read_byte(pc + 1, ((u8 *) &x) + 0) < 0 ||
+                           gdbstub_read_byte(pc + 2, ((u8 *) &x) + 1) < 0 ||
+                           gdbstub_read_byte(pc + 3, ((u8 *) &x) + 2) < 0 ||
+                           gdbstub_read_byte(pc + 4, ((u8 *) &x) + 3) < 0)
+                               goto fault;
+                       if (!__gdbstub_mark_bp(pc + (s32) x, 0))
+                               goto fault;
+                       break;
+
+                       /* RETF */
+               case 0xde:
+                       if (!__gdbstub_mark_bp((u8 *) regs->mdr, 0))
+                               goto fault;
+                       break;
+
+                       /* RET */
+               case 0xdf:
+                       if (gdbstub_read_byte(pc + 2, (u8 *) &x) < 0)
+                               goto fault;
+                       sp += (s8)x;
+                       if (gdbstub_read_byte(sp + 0, ((u8 *) &x) + 0) < 0 ||
+                           gdbstub_read_byte(sp + 1, ((u8 *) &x) + 1) < 0 ||
+                           gdbstub_read_byte(sp + 2, ((u8 *) &x) + 2) < 0 ||
+                           gdbstub_read_byte(sp + 3, ((u8 *) &x) + 3) < 0)
+                               goto fault;
+                       if (!__gdbstub_mark_bp((u8 *) x, 0))
+                               goto fault;
+                       break;
+
+               case 0xf0:
+                       if (gdbstub_read_byte(pc + 1, &cur) < 0)
+                               goto fault;
+
+                       if (cur >= 0xf0 && cur <= 0xf7) {
+                               /* JMP (An) / CALLS (An) */
+                               switch (cur & 3) {
+                               case 0: x = regs->a0; break;
+                               case 1: x = regs->a1; break;
+                               case 2: x = regs->a2; break;
+                               case 3: x = regs->a3; break;
+                               }
+                               if (!__gdbstub_mark_bp((u8 *) x, 0))
+                                       goto fault;
+                       } else if (cur == 0xfc) {
+                               /* RETS */
+                               if (gdbstub_read_byte(
+                                           sp + 0, ((u8 *) &x) + 0) < 0 ||
+                                   gdbstub_read_byte(
+                                           sp + 1, ((u8 *) &x) + 1) < 0 ||
+                                   gdbstub_read_byte(
+                                           sp + 2, ((u8 *) &x) + 2) < 0 ||
+                                   gdbstub_read_byte(
+                                           sp + 3, ((u8 *) &x) + 3) < 0)
+                                       goto fault;
+                               if (!__gdbstub_mark_bp((u8 *) x, 0))
+                                       goto fault;
+                       } else if (cur == 0xfd) {
+                               /* RTI */
+                               if (gdbstub_read_byte(
+                                           sp + 4, ((u8 *) &x) + 0) < 0 ||
+                                   gdbstub_read_byte(
+                                           sp + 5, ((u8 *) &x) + 1) < 0 ||
+                                   gdbstub_read_byte(
+                                           sp + 6, ((u8 *) &x) + 2) < 0 ||
+                                   gdbstub_read_byte(
+                                           sp + 7, ((u8 *) &x) + 3) < 0)
+                                       goto fault;
+                               if (!__gdbstub_mark_bp((u8 *) x, 0))
+                                       goto fault;
+                       } else {
+                               if (!__gdbstub_mark_bp(pc + 2, 0))
+                                       goto fault;
+                       }
+
+                       break;
+
+                       /* potential 3-byte conditional branches */
+               case 0xf8:
+                       if (gdbstub_read_byte(pc + 1, &cur) < 0)
+                               goto fault;
+                       if (!__gdbstub_mark_bp(pc + 3, 0))
+                               goto fault;
+
+                       if (cur >= 0xe8 && cur <= 0xeb) {
+                               if (gdbstub_read_byte(
+                                           pc + 2, ((u8 *) &x) + 0) < 0)
+                                       goto fault;
+                               if ((x < 0 || x > 3) &&
+                                   !__gdbstub_mark_bp(pc + (s8) x, 1))
+                                       goto fault;
+                       }
+                       break;
+
+               case 0xfa:
+                       if (gdbstub_read_byte(pc + 1, &cur) < 0)
+                               goto fault;
+
+                       if (cur == 0xff) {
+                               /* CALLS (d16,PC) */
+                               if (gdbstub_read_byte(
+                                           pc + 2, ((u8 *) &x) + 0) < 0 ||
+                                   gdbstub_read_byte(
+                                           pc + 3, ((u8 *) &x) + 1) < 0)
+                                       goto fault;
+                               if (!__gdbstub_mark_bp(pc + (s16) x, 0))
+                                       goto fault;
+                       } else {
+                               if (!__gdbstub_mark_bp(pc + 4, 0))
+                                       goto fault;
+                       }
+                       break;
+
+               case 0xfc:
+                       if (gdbstub_read_byte(pc + 1, &cur) < 0)
+                               goto fault;
+                       if (cur == 0xff) {
+                               /* CALLS (d32,PC) */
+                               if (gdbstub_read_byte(
+                                           pc + 2, ((u8 *) &x) + 0) < 0 ||
+                                   gdbstub_read_byte(
+                                           pc + 3, ((u8 *) &x) + 1) < 0 ||
+                                   gdbstub_read_byte(
+                                           pc + 4, ((u8 *) &x) + 2) < 0 ||
+                                   gdbstub_read_byte(
+                                           pc + 5, ((u8 *) &x) + 3) < 0)
+                                       goto fault;
+                               if (!__gdbstub_mark_bp(
+                                           pc + (s32) x, 0))
+                                       goto fault;
+                       } else {
+                               if (!__gdbstub_mark_bp(
+                                           pc + 6, 0))
+                                       goto fault;
+                       }
+                       break;
+
+               }
+       }
+
+       gdbstub_bkpt("Step: %02x at %p; %02x at %p\n",
+                    step_bp[0].opcode[0], step_bp[0].addr,
+                    step_bp[1].opcode[0], step_bp[1].addr);
+
+       if (step_bp[0].addr) {
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+               if (gdbstub_write_byte(0xF7, step_bp[0].addr + 0) < 0 ||
+                   gdbstub_write_byte(0xF7, step_bp[0].addr + 1) < 0)
+                       goto fault;
+#else
+               if (gdbstub_write_byte(0xFF, step_bp[0].addr + 0) < 0)
+                       goto fault;
+#endif
+       }
+
+       if (step_bp[1].addr) {
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+               if (gdbstub_write_byte(0xF7, step_bp[1].addr + 0) < 0 ||
+                   gdbstub_write_byte(0xF7, step_bp[1].addr + 1) < 0)
+                       goto fault;
+#else
+               if (gdbstub_write_byte(0xFF, step_bp[1].addr + 0) < 0)
+                       goto fault;
+#endif
+       }
+
+       return 0;
+
+ fault:
+       /* uh-oh - silly address alert, try and restore things */
+       __gdbstub_restore_bp();
+       return -EFAULT;
+}
+
+#ifdef CONFIG_GDBSTUB_CONSOLE
+
+void gdbstub_console_write(struct console *con, const char *p, unsigned n)
+{
+       static const char gdbstub_cr[] = { 0x0d };
+       char outbuf[26];
+       int qty;
+       u8 busy;
+
+       busy = gdbstub_busy;
+       gdbstub_busy = 1;
+
+       outbuf[0] = 'O';
+
+       while (n > 0) {
+               qty = 1;
+
+               while (n > 0 && qty < 20) {
+                       mem2hex(p, outbuf + qty, 2, 0);
+                       qty += 2;
+                       if (*p == 0x0a) {
+                               mem2hex(gdbstub_cr, outbuf + qty, 2, 0);
+                               qty += 2;
+                       }
+                       p++;
+                       n--;
+               }
+
+               outbuf[qty] = 0;
+               putpacket(outbuf);
+       }
+
+       gdbstub_busy = busy;
+}
+
+static kdev_t gdbstub_console_dev(struct console *con)
+{
+       return MKDEV(1, 3); /* /dev/null */
+}
+
+static struct console gdbstub_console = {
+       .name   = "gdb",
+       .write  = gdbstub_console_write,
+       .device = gdbstub_console_dev,
+       .flags  = CON_PRINTBUFFER,
+       .index  = -1,
+};
+
+#endif
+
+/*
+ * Convert the memory pointed to by mem into hex, placing result in buf.
+ * - if successful, return a pointer to the last char put in buf (NUL)
+ * - in case of mem fault, return NULL
+ * may_fault is non-zero if we are reading from arbitrary memory, but is
+ * currently not used.
+ */
+static
+unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
+{
+       const u8 *mem = _mem;
+       u8 ch[4];
+
+       if ((u32) mem & 1 && count >= 1) {
+               if (gdbstub_read_byte(mem, ch) != 0)
+                       return 0;
+               *buf++ = hexchars[ch[0] >> 4];
+               *buf++ = hexchars[ch[0] & 0xf];
+               mem++;
+               count--;
+       }
+
+       if ((u32) mem & 3 && count >= 2) {
+               if (gdbstub_read_word(mem, ch) != 0)
+                       return 0;
+               *buf++ = hexchars[ch[0] >> 4];
+               *buf++ = hexchars[ch[0] & 0xf];
+               *buf++ = hexchars[ch[1] >> 4];
+               *buf++ = hexchars[ch[1] & 0xf];
+               mem += 2;
+               count -= 2;
+       }
+
+       while (count >= 4) {
+               if (gdbstub_read_dword(mem, ch) != 0)
+                       return 0;
+               *buf++ = hexchars[ch[0] >> 4];
+               *buf++ = hexchars[ch[0] & 0xf];
+               *buf++ = hexchars[ch[1] >> 4];
+               *buf++ = hexchars[ch[1] & 0xf];
+               *buf++ = hexchars[ch[2] >> 4];
+               *buf++ = hexchars[ch[2] & 0xf];
+               *buf++ = hexchars[ch[3] >> 4];
+               *buf++ = hexchars[ch[3] & 0xf];
+               mem += 4;
+               count -= 4;
+       }
+
+       if (count >= 2) {
+               if (gdbstub_read_word(mem, ch) != 0)
+                       return 0;
+               *buf++ = hexchars[ch[0] >> 4];
+               *buf++ = hexchars[ch[0] & 0xf];
+               *buf++ = hexchars[ch[1] >> 4];
+               *buf++ = hexchars[ch[1] & 0xf];
+               mem += 2;
+               count -= 2;
+       }
+
+       if (count >= 1) {
+               if (gdbstub_read_byte(mem, ch) != 0)
+                       return 0;
+               *buf++ = hexchars[ch[0] >> 4];
+               *buf++ = hexchars[ch[0] & 0xf];
+       }
+
+       *buf = 0;
+       return buf;
+}
+
+/*
+ * convert the hex array pointed to by buf into binary to be placed in mem
+ * return a pointer to the character AFTER the last byte written
+ * may_fault is non-zero if we are reading from arbitrary memory, but is
+ * currently not used.
+ */
+static
+const char *hex2mem(const char *buf, void *_mem, int count, int may_fault)
+{
+       u8 *mem = _mem;
+       union {
+               u32 val;
+               u8 b[4];
+       } ch;
+
+       if ((u32) mem & 1 && count >= 1) {
+               ch.b[0]  = hex(*buf++) << 4;
+               ch.b[0] |= hex(*buf++);
+               if (gdbstub_write_byte(ch.val, mem) != 0)
+                       return 0;
+               mem++;
+               count--;
+       }
+
+       if ((u32) mem & 3 && count >= 2) {
+               ch.b[0]  = hex(*buf++) << 4;
+               ch.b[0] |= hex(*buf++);
+               ch.b[1]  = hex(*buf++) << 4;
+               ch.b[1] |= hex(*buf++);
+               if (gdbstub_write_word(ch.val, mem) != 0)
+                       return 0;
+               mem += 2;
+               count -= 2;
+       }
+
+       while (count >= 4) {
+               ch.b[0]  = hex(*buf++) << 4;
+               ch.b[0] |= hex(*buf++);
+               ch.b[1]  = hex(*buf++) << 4;
+               ch.b[1] |= hex(*buf++);
+               ch.b[2]  = hex(*buf++) << 4;
+               ch.b[2] |= hex(*buf++);
+               ch.b[3]  = hex(*buf++) << 4;
+               ch.b[3] |= hex(*buf++);
+               if (gdbstub_write_dword(ch.val, mem) != 0)
+                       return 0;
+               mem += 4;
+               count -= 4;
+       }
+
+       if (count >= 2) {
+               ch.b[0]  = hex(*buf++) << 4;
+               ch.b[0] |= hex(*buf++);
+               ch.b[1]  = hex(*buf++) << 4;
+               ch.b[1] |= hex(*buf++);
+               if (gdbstub_write_word(ch.val, mem) != 0)
+                       return 0;
+               mem += 2;
+               count -= 2;
+       }
+
+       if (count >= 1) {
+               ch.b[0]  = hex(*buf++) << 4;
+               ch.b[0] |= hex(*buf++);
+               if (gdbstub_write_byte(ch.val, mem) != 0)
+                       return 0;
+       }
+
+       return buf;
+}
+
+/*
+ * This table contains the mapping between MN10300 exception codes, and
+ * signals, which are primarily what GDB understands.  It also indicates
+ * which hardware traps we need to commandeer when initializing the stub.
+ */
+static const struct excep_to_sig_map {
+       enum exception_code     excep;  /* MN10300 exception code */
+       unsigned char           signo;  /* Signal that we map this into */
+} excep_to_sig_map[] = {
+       { EXCEP_ITLBMISS,       SIGSEGV         },
+       { EXCEP_DTLBMISS,       SIGSEGV         },
+       { EXCEP_TRAP,           SIGTRAP         },
+       { EXCEP_ISTEP,          SIGTRAP         },
+       { EXCEP_IBREAK,         SIGTRAP         },
+       { EXCEP_OBREAK,         SIGTRAP         },
+       { EXCEP_UNIMPINS,       SIGILL          },
+       { EXCEP_UNIMPEXINS,     SIGILL          },
+       { EXCEP_MEMERR,         SIGSEGV         },
+       { EXCEP_MISALIGN,       SIGSEGV         },
+       { EXCEP_BUSERROR,       SIGBUS          },
+       { EXCEP_ILLINSACC,      SIGSEGV         },
+       { EXCEP_ILLDATACC,      SIGSEGV         },
+       { EXCEP_IOINSACC,       SIGSEGV         },
+       { EXCEP_PRIVINSACC,     SIGSEGV         },
+       { EXCEP_PRIVDATACC,     SIGSEGV         },
+       { EXCEP_FPU_DISABLED,   SIGFPE          },
+       { EXCEP_FPU_UNIMPINS,   SIGFPE          },
+       { EXCEP_FPU_OPERATION,  SIGFPE          },
+       { EXCEP_WDT,            SIGALRM         },
+       { EXCEP_NMI,            SIGQUIT         },
+       { EXCEP_IRQ_LEVEL0,     SIGINT          },
+       { EXCEP_IRQ_LEVEL1,     SIGINT          },
+       { EXCEP_IRQ_LEVEL2,     SIGINT          },
+       { EXCEP_IRQ_LEVEL3,     SIGINT          },
+       { EXCEP_IRQ_LEVEL4,     SIGINT          },
+       { EXCEP_IRQ_LEVEL5,     SIGINT          },
+       { EXCEP_IRQ_LEVEL6,     SIGINT          },
+       { 0, 0}
+};
+
+/*
+ * convert the MN10300 exception code into a UNIX signal number
+ */
+static int computeSignal(enum exception_code excep)
+{
+       const struct excep_to_sig_map *map;
+
+       for (map = excep_to_sig_map; map->signo; map++)
+               if (map->excep == excep)
+                       return map->signo;
+
+       return SIGHUP; /* default for things we don't know about */
+}
+
+static u32 gdbstub_fpcr, gdbstub_fpufs_array[32];
+
+/*
+ *
+ */
+static void gdbstub_store_fpu(void)
+{
+#ifdef CONFIG_FPU
+
+       asm volatile(
+               "or %2,epsw\n"
+#ifdef CONFIG_MN10300_PROC_MN103E010
+               "nop\n"
+               "nop\n"
+#endif
+               "mov %1, a1\n"
+               "fmov fs0,  (a1+)\n"
+               "fmov fs1,  (a1+)\n"
+               "fmov fs2,  (a1+)\n"
+               "fmov fs3,  (a1+)\n"
+               "fmov fs4,  (a1+)\n"
+               "fmov fs5,  (a1+)\n"
+               "fmov fs6,  (a1+)\n"
+               "fmov fs7,  (a1+)\n"
+               "fmov fs8,  (a1+)\n"
+               "fmov fs9,  (a1+)\n"
+               "fmov fs10, (a1+)\n"
+               "fmov fs11, (a1+)\n"
+               "fmov fs12, (a1+)\n"
+               "fmov fs13, (a1+)\n"
+               "fmov fs14, (a1+)\n"
+               "fmov fs15, (a1+)\n"
+               "fmov fs16, (a1+)\n"
+               "fmov fs17, (a1+)\n"
+               "fmov fs18, (a1+)\n"
+               "fmov fs19, (a1+)\n"
+               "fmov fs20, (a1+)\n"
+               "fmov fs21, (a1+)\n"
+               "fmov fs22, (a1+)\n"
+               "fmov fs23, (a1+)\n"
+               "fmov fs24, (a1+)\n"
+               "fmov fs25, (a1+)\n"
+               "fmov fs26, (a1+)\n"
+               "fmov fs27, (a1+)\n"
+               "fmov fs28, (a1+)\n"
+               "fmov fs29, (a1+)\n"
+               "fmov fs30, (a1+)\n"
+               "fmov fs31, (a1+)\n"
+               "fmov fpcr, %0\n"
+               : "=d"(gdbstub_fpcr)
+               : "g" (&gdbstub_fpufs_array), "i"(EPSW_FE)
+               : "a1"
+               );
+#endif
+}
+
+/*
+ *
+ */
+static void gdbstub_load_fpu(void)
+{
+#ifdef CONFIG_FPU
+
+       asm volatile(
+               "or %1,epsw\n"
+#ifdef CONFIG_MN10300_PROC_MN103E010
+               "nop\n"
+               "nop\n"
+#endif
+               "mov %0, a1\n"
+               "fmov (a1+), fs0\n"
+               "fmov (a1+), fs1\n"
+               "fmov (a1+), fs2\n"
+               "fmov (a1+), fs3\n"
+               "fmov (a1+), fs4\n"
+               "fmov (a1+), fs5\n"
+               "fmov (a1+), fs6\n"
+               "fmov (a1+), fs7\n"
+               "fmov (a1+), fs8\n"
+               "fmov (a1+), fs9\n"
+               "fmov (a1+), fs10\n"
+               "fmov (a1+), fs11\n"
+               "fmov (a1+), fs12\n"
+               "fmov (a1+), fs13\n"
+               "fmov (a1+), fs14\n"
+               "fmov (a1+), fs15\n"
+               "fmov (a1+), fs16\n"
+               "fmov (a1+), fs17\n"
+               "fmov (a1+), fs18\n"
+               "fmov (a1+), fs19\n"
+               "fmov (a1+), fs20\n"
+               "fmov (a1+), fs21\n"
+               "fmov (a1+), fs22\n"
+               "fmov (a1+), fs23\n"
+               "fmov (a1+), fs24\n"
+               "fmov (a1+), fs25\n"
+               "fmov (a1+), fs26\n"
+               "fmov (a1+), fs27\n"
+               "fmov (a1+), fs28\n"
+               "fmov (a1+), fs29\n"
+               "fmov (a1+), fs30\n"
+               "fmov (a1+), fs31\n"
+               "fmov %2, fpcr\n"
+               :
+               : "g" (&gdbstub_fpufs_array), "i"(EPSW_FE), "d"(gdbstub_fpcr)
+               : "a1"
+       );
+#endif
+}
+
+/*
+ * set a software breakpoint
+ */
+int gdbstub_set_breakpoint(u8 *addr, int len)
+{
+       int bkpt, loop, xloop;
+
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+       len = (len + 1) & ~1;
+#endif
+
+       gdbstub_bkpt("setbkpt(%p,%d)\n", addr, len);
+
+       for (bkpt = 255; bkpt >= 0; bkpt--)
+               if (!gdbstub_bkpts[bkpt].addr)
+                       break;
+       if (bkpt < 0)
+               return -ENOSPC;
+
+       for (loop = 0; loop < len; loop++)
+               if (gdbstub_read_byte(&addr[loop],
+                                     &gdbstub_bkpts[bkpt].origbytes[loop]
+                                     ) < 0)
+                       return -EFAULT;
+
+       gdbstub_flush_caches = 1;
+
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+       for (loop = 0; loop < len; loop++)
+               if (gdbstub_write_byte(0xF7, &addr[loop]) < 0)
+                       goto restore;
+#else
+       for (loop = 0; loop < len; loop++)
+               if (gdbstub_write_byte(0xFF, &addr[loop]) < 0)
+                       goto restore;
+#endif
+
+       gdbstub_bkpts[bkpt].addr = addr;
+       gdbstub_bkpts[bkpt].len = len;
+
+       gdbstub_bkpt("Set BKPT[%02x]: %p-%p {%02x%02x%02x%02x%02x%02x%02x}\n",
+                    bkpt,
+                    gdbstub_bkpts[bkpt].addr,
+                    gdbstub_bkpts[bkpt].addr + gdbstub_bkpts[bkpt].len - 1,
+                    gdbstub_bkpts[bkpt].origbytes[0],
+                    gdbstub_bkpts[bkpt].origbytes[1],
+                    gdbstub_bkpts[bkpt].origbytes[2],
+                    gdbstub_bkpts[bkpt].origbytes[3],
+                    gdbstub_bkpts[bkpt].origbytes[4],
+                    gdbstub_bkpts[bkpt].origbytes[5],
+                    gdbstub_bkpts[bkpt].origbytes[6]
+                    );
+
+       return 0;
+
+restore:
+       for (xloop = 0; xloop < loop; xloop++)
+               gdbstub_write_byte(gdbstub_bkpts[bkpt].origbytes[xloop],
+                                  addr + xloop);
+       return -EFAULT;
+}
+
+/*
+ * clear a software breakpoint
+ */
+int gdbstub_clear_breakpoint(u8 *addr, int len)
+{
+       int bkpt, loop;
+
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+       len = (len + 1) & ~1;
+#endif
+
+       gdbstub_bkpt("clearbkpt(%p,%d)\n", addr, len);
+
+       for (bkpt = 255; bkpt >= 0; bkpt--)
+               if (gdbstub_bkpts[bkpt].addr == addr &&
+                   gdbstub_bkpts[bkpt].len == len)
+                       break;
+       if (bkpt < 0)
+               return -ENOENT;
+
+       gdbstub_bkpts[bkpt].addr = NULL;
+
+       gdbstub_flush_caches = 1;
+
+       for (loop = 0; loop < len; loop++)
+               if (gdbstub_write_byte(gdbstub_bkpts[bkpt].origbytes[loop],
+                                      addr + loop) < 0)
+                       return -EFAULT;
+
+       return 0;
+}
+
+/*
+ * This function does all command processing for interfacing to gdb
+ * - returns 1 if the exception should be skipped, 0 otherwise.
+ */
+static int gdbstub(struct pt_regs *regs, enum exception_code excep)
+{
+       unsigned long *stack;
+       unsigned long epsw, mdr;
+       uint32_t zero, ssp;
+       uint8_t broke;
+       char *ptr;
+       int sigval;
+       int addr;
+       int length;
+       int loop;
+
+       if (excep == EXCEP_FPU_DISABLED)
+               return 0;
+
+       gdbstub_flush_caches = 0;
+
+       mn10300_set_gdbleds(1);
+
+       asm volatile("mov mdr,%0" : "=d"(mdr));
+       asm volatile("mov epsw,%0" : "=d"(epsw));
+       asm volatile("mov %0,epsw"
+                    :: "d"((epsw & ~EPSW_IM) | EPSW_IE | EPSW_IM_1));
+
+       gdbstub_store_fpu();
+
+#ifdef CONFIG_GDBSTUB_IMMEDIATE
+       /* skip the initial pause loop */
+       if (regs->pc == (unsigned long) __gdbstub_pause)
+               regs->pc = (unsigned long) start_kernel;
+#endif
+
+       /* if we were single stepping, restore the opcodes hoisted for the
+        * breakpoint[s] */
+       broke = 0;
+       if ((step_bp[0].addr && step_bp[0].addr == (u8 *) regs->pc) ||
+           (step_bp[1].addr && step_bp[1].addr == (u8 *) regs->pc))
+               broke = 1;
+
+       __gdbstub_restore_bp();
+
+       if (gdbstub_rx_unget) {
+               sigval = SIGINT;
+               if (gdbstub_rx_unget != 3)
+                       goto packet_waiting;
+               gdbstub_rx_unget = 0;
+       }
+
+       stack = (unsigned long *) regs->sp;
+       sigval = broke ? SIGTRAP : computeSignal(excep);
+
+       /* send information about a BUG() */
+       if (!user_mode(regs) && excep == EXCEP_SYSCALL15) {
+               const struct bug_entry *bug;
+
+               bug = find_bug(regs->pc);
+               if (bug)
+                       goto found_bug;
+               length = snprintf(trans_buffer, sizeof(trans_buffer),
+                                 "BUG() at address %lx\n", regs->pc);
+               goto send_bug_pkt;
+
+       found_bug:
+               length = snprintf(trans_buffer, sizeof(trans_buffer),
+                                 "BUG() at address %lx (%s:%d)\n",
+                                 regs->pc, bug->file, bug->line);
+
+       send_bug_pkt:
+               ptr = output_buffer;
+               *ptr++ = 'O';
+               ptr = mem2hex(trans_buffer, ptr, length, 0);
+               *ptr = 0;
+               putpacket(output_buffer);
+
+               regs->pc -= 2;
+               sigval = SIGABRT;
+       } else if (regs->pc == (unsigned long) __gdbstub_bug_trap) {
+               regs->pc = regs->mdr;
+               sigval = SIGABRT;
+       }
+
+       /*
+        * send a message to the debugger's user saying what happened if it may
+        * not be clear cut (we can't map exceptions onto signals properly)
+        */
+       if (sigval != SIGINT && sigval != SIGTRAP && sigval != SIGILL) {
+               static const char title[] = "Excep ", tbcberr[] = "BCBERR ";
+               static const char crlf[] = "\r\n";
+               char hx;
+               u32 bcberr = BCBERR;
+
+               ptr = output_buffer;
+               *ptr++ = 'O';
+               ptr = mem2hex(title, ptr, sizeof(title) - 1, 0);
+
+               hx = hexchars[(excep & 0xf000) >> 12];
+               *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
+               hx = hexchars[(excep & 0x0f00) >> 8];
+               *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
+               hx = hexchars[(excep & 0x00f0) >> 4];
+               *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
+               hx = hexchars[(excep & 0x000f)];
+               *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
+
+               ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
+               *ptr = 0;
+               putpacket(output_buffer);       /* send it off... */
+
+               /* BCBERR */
+               ptr = output_buffer;
+               *ptr++ = 'O';
+               ptr = mem2hex(tbcberr, ptr, sizeof(tbcberr) - 1, 0);
+
+               hx = hexchars[(bcberr & 0xf0000000) >> 28];
+               *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
+               hx = hexchars[(bcberr & 0x0f000000) >> 24];
+               *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
+               hx = hexchars[(bcberr & 0x00f00000) >> 20];
+               *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
+               hx = hexchars[(bcberr & 0x000f0000) >> 16];
+               *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
+               hx = hexchars[(bcberr & 0x0000f000) >> 12];
+               *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
+               hx = hexchars[(bcberr & 0x00000f00) >> 8];
+               *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
+               hx = hexchars[(bcberr & 0x000000f0) >> 4];
+               *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
+               hx = hexchars[(bcberr & 0x0000000f)];
+               *ptr++ = hexchars[hx >> 4];     *ptr++ = hexchars[hx & 0xf];
+
+               ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
+               *ptr = 0;
+               putpacket(output_buffer);       /* send it off... */
+       }
+
+       /*
+        * tell the debugger that an exception has occurred
+        */
+       ptr = output_buffer;
+
+       /*
+        * Send trap type (converted to signal)
+        */
+       *ptr++ = 'T';
+       *ptr++ = hexchars[sigval >> 4];
+       *ptr++ = hexchars[sigval & 0xf];
+
+       /*
+        * Send Error PC
+        */
+       *ptr++ = hexchars[GDB_REGID_PC >> 4];
+       *ptr++ = hexchars[GDB_REGID_PC & 0xf];
+       *ptr++ = ':';
+       ptr = mem2hex(&regs->pc, ptr, 4, 0);
+       *ptr++ = ';';
+
+       /*
+        * Send frame pointer
+        */
+       *ptr++ = hexchars[GDB_REGID_FP >> 4];
+       *ptr++ = hexchars[GDB_REGID_FP & 0xf];
+       *ptr++ = ':';
+       ptr = mem2hex(&regs->a3, ptr, 4, 0);
+       *ptr++ = ';';
+
+       /*
+        * Send stack pointer
+        */
+       ssp = (unsigned long) (regs + 1);
+       *ptr++ = hexchars[GDB_REGID_SP >> 4];
+       *ptr++ = hexchars[GDB_REGID_SP & 0xf];
+       *ptr++ = ':';
+       ptr = mem2hex(&ssp, ptr, 4, 0);
+       *ptr++ = ';';
+
+       *ptr++ = 0;
+       putpacket(output_buffer);       /* send it off... */
+
+packet_waiting:
+       /*
+        * Wait for input from remote GDB
+        */
+       while (1) {
+               output_buffer[0] = 0;
+               getpacket(input_buffer);
+
+               switch (input_buffer[0]) {
+                       /* request repeat of last signal number */
+               case '?':
+                       output_buffer[0] = 'S';
+                       output_buffer[1] = hexchars[sigval >> 4];
+                       output_buffer[2] = hexchars[sigval & 0xf];
+                       output_buffer[3] = 0;
+                       break;
+
+               case 'd':
+                       /* toggle debug flag */
+                       break;
+
+                       /*
+                        * Return the value of the CPU registers
+                        */
+               case 'g':
+                       zero = 0;
+                       ssp = (u32) (regs + 1);
+                       ptr = output_buffer;
+                       ptr = mem2hex(&regs->d0, ptr, 4, 0);
+                       ptr = mem2hex(&regs->d1, ptr, 4, 0);
+                       ptr = mem2hex(&regs->d2, ptr, 4, 0);
+                       ptr = mem2hex(&regs->d3, ptr, 4, 0);
+                       ptr = mem2hex(&regs->a0, ptr, 4, 0);
+                       ptr = mem2hex(&regs->a1, ptr, 4, 0);
+                       ptr = mem2hex(&regs->a2, ptr, 4, 0);
+                       ptr = mem2hex(&regs->a3, ptr, 4, 0);
+
+                       ptr = mem2hex(&ssp, ptr, 4, 0);         /* 8 */
+                       ptr = mem2hex(&regs->pc, ptr, 4, 0);
+                       ptr = mem2hex(&regs->mdr, ptr, 4, 0);
+                       ptr = mem2hex(&regs->epsw, ptr, 4, 0);
+                       ptr = mem2hex(&regs->lir, ptr, 4, 0);
+                       ptr = mem2hex(&regs->lar, ptr, 4, 0);
+                       ptr = mem2hex(&regs->mdrq, ptr, 4, 0);
+
+                       ptr = mem2hex(&regs->e0, ptr, 4, 0);    /* 15 */
+                       ptr = mem2hex(&regs->e1, ptr, 4, 0);
+                       ptr = mem2hex(&regs->e2, ptr, 4, 0);
+                       ptr = mem2hex(&regs->e3, ptr, 4, 0);
+                       ptr = mem2hex(&regs->e4, ptr, 4, 0);
+                       ptr = mem2hex(&regs->e5, ptr, 4, 0);
+                       ptr = mem2hex(&regs->e6, ptr, 4, 0);
+                       ptr = mem2hex(&regs->e7, ptr, 4, 0);
+
+                       ptr = mem2hex(&ssp, ptr, 4, 0);
+                       ptr = mem2hex(&regs, ptr, 4, 0);
+                       ptr = mem2hex(&regs->sp, ptr, 4, 0);
+                       ptr = mem2hex(&regs->mcrh, ptr, 4, 0);  /* 26 */
+                       ptr = mem2hex(&regs->mcrl, ptr, 4, 0);
+                       ptr = mem2hex(&regs->mcvf, ptr, 4, 0);
+
+                       ptr = mem2hex(&gdbstub_fpcr, ptr, 4, 0); /* 29 - FPCR */
+                       ptr = mem2hex(&zero, ptr, 4, 0);
+                       ptr = mem2hex(&zero, ptr, 4, 0);
+                       for (loop = 0; loop < 32; loop++)
+                               ptr = mem2hex(&gdbstub_fpufs_array[loop],
+                                             ptr, 4, 0); /* 32 - FS0-31 */
+
+                       break;
+
+                       /*
+                        * set the value of the CPU registers - return OK
+                        */
+               case 'G':
+               {
+                       const char *ptr;
+
+                       ptr = &input_buffer[1];
+                       ptr = hex2mem(ptr, &regs->d0, 4, 0);
+                       ptr = hex2mem(ptr, &regs->d1, 4, 0);
+                       ptr = hex2mem(ptr, &regs->d2, 4, 0);
+                       ptr = hex2mem(ptr, &regs->d3, 4, 0);
+                       ptr = hex2mem(ptr, &regs->a0, 4, 0);
+                       ptr = hex2mem(ptr, &regs->a1, 4, 0);
+                       ptr = hex2mem(ptr, &regs->a2, 4, 0);
+                       ptr = hex2mem(ptr, &regs->a3, 4, 0);
+
+                       ptr = hex2mem(ptr, &ssp, 4, 0);         /* 8 */
+                       ptr = hex2mem(ptr, &regs->pc, 4, 0);
+                       ptr = hex2mem(ptr, &regs->mdr, 4, 0);
+                       ptr = hex2mem(ptr, &regs->epsw, 4, 0);
+                       ptr = hex2mem(ptr, &regs->lir, 4, 0);
+                       ptr = hex2mem(ptr, &regs->lar, 4, 0);
+                       ptr = hex2mem(ptr, &regs->mdrq, 4, 0);
+
+                       ptr = hex2mem(ptr, &regs->e0, 4, 0);    /* 15 */
+                       ptr = hex2mem(ptr, &regs->e1, 4, 0);
+                       ptr = hex2mem(ptr, &regs->e2, 4, 0);
+                       ptr = hex2mem(ptr, &regs->e3, 4, 0);
+                       ptr = hex2mem(ptr, &regs->e4, 4, 0);
+                       ptr = hex2mem(ptr, &regs->e5, 4, 0);
+                       ptr = hex2mem(ptr, &regs->e6, 4, 0);
+                       ptr = hex2mem(ptr, &regs->e7, 4, 0);
+
+                       ptr = hex2mem(ptr, &ssp, 4, 0);
+                       ptr = hex2mem(ptr, &zero, 4, 0);
+                       ptr = hex2mem(ptr, &regs->sp, 4, 0);
+                       ptr = hex2mem(ptr, &regs->mcrh, 4, 0);  /* 26 */
+                       ptr = hex2mem(ptr, &regs->mcrl, 4, 0);
+                       ptr = hex2mem(ptr, &regs->mcvf, 4, 0);
+
+                       ptr = hex2mem(ptr, &zero, 4, 0);        /* 29 - FPCR */
+                       ptr = hex2mem(ptr, &zero, 4, 0);
+                       ptr = hex2mem(ptr, &zero, 4, 0);
+                       for (loop = 0; loop < 32; loop++)     /* 32 - FS0-31 */
+                               ptr = hex2mem(ptr, &zero, 4, 0);
+
+#if 0
+                       /*
+                        * See if the stack pointer has moved. If so, then copy
+                        * the saved locals and ins to the new location.
+                        */
+                       unsigned long *newsp = (unsigned long *) registers[SP];
+                       if (sp != newsp)
+                               sp = memcpy(newsp, sp, 16 * 4);
+#endif
+
+                       gdbstub_strcpy(output_buffer, "OK");
+               }
+               break;
+
+               /*
+                * mAA..AA,LLLL  Read LLLL bytes at address AA..AA
+                */
+               case 'm':
+                       ptr = &input_buffer[1];
+
+                       if (hexToInt(&ptr, &addr) &&
+                           *ptr++ == ',' &&
+                           hexToInt(&ptr, &length)
+                           ) {
+                               if (mem2hex((char *) addr, output_buffer,
+                                           length, 1))
+                                       break;
+                               gdbstub_strcpy(output_buffer, "E03");
+                       } else {
+                               gdbstub_strcpy(output_buffer, "E01");
+                       }
+                       break;
+
+                       /*
+                        * MAA..AA,LLLL: Write LLLL bytes at address AA.AA
+                        * return OK
+                        */
+               case 'M':
+                       ptr = &input_buffer[1];
+
+                       if (hexToInt(&ptr, &addr) &&
+                           *ptr++ == ',' &&
+                           hexToInt(&ptr, &length) &&
+                           *ptr++ == ':'
+                           ) {
+                               if (hex2mem(ptr, (char *) addr, length, 1))
+                                       gdbstub_strcpy(output_buffer, "OK");
+                               else
+                                       gdbstub_strcpy(output_buffer, "E03");
+
+                               gdbstub_flush_caches = 1;
+                       } else {
+                               gdbstub_strcpy(output_buffer, "E02");
+                       }
+                       break;
+
+                       /*
+                        * cAA..AA    Continue at address AA..AA(optional)
+                        */
+               case 'c':
+                       /* try to read optional parameter, pc unchanged if no
+                        * parm */
+
+                       ptr = &input_buffer[1];
+                       if (hexToInt(&ptr, &addr))
+                               regs->pc = addr;
+                       goto done;
+
+                       /*
+                        * kill the program
+                        */
+               case 'k' :
+                       goto done;      /* just continue */
+
+                       /*
+                        * Reset the whole machine (FIXME: system dependent)
+                        */
+               case 'r':
+                       break;
+
+                       /*
+                        * Step to next instruction
+                        */
+               case 's':
+                       /*
+                        * using the T flag doesn't seem to perform single
+                        * stepping (it seems to wind up being caught by the
+                        * JTAG unit), so we have to use breakpoints and
+                        * continue instead.
+                        */
+                       if (gdbstub_single_step(regs) < 0)
+                               /* ignore any fault error for now */
+                               gdbstub_printk("unable to set single-step"
+                                              " bp\n");
+                       goto done;
+
+                       /*
+                        * Set baud rate (bBB)
+                        */
+               case 'b':
+                       do {
+                               int baudrate;
+
+                               ptr = &input_buffer[1];
+                               if (!hexToInt(&ptr, &baudrate)) {
+                                       gdbstub_strcpy(output_buffer, "B01");
+                                       break;
+                               }
+
+                               if (baudrate) {
+                                       /* ACK before changing speed */
+                                       putpacket("OK");
+                                       gdbstub_io_set_baud(baudrate);
+                               }
+                       } while (0);
+                       break;
+
+                       /*
+                        * Set breakpoint
+                        */
+               case 'Z':
+                       ptr = &input_buffer[1];
+
+                       if (!hexToInt(&ptr, &loop) || *ptr++ != ',' ||
+                           !hexToInt(&ptr, &addr) || *ptr++ != ',' ||
+                           !hexToInt(&ptr, &length)
+                           ) {
+                               gdbstub_strcpy(output_buffer, "E01");
+                               break;
+                       }
+
+                       /* only support software breakpoints */
+                       gdbstub_strcpy(output_buffer, "E03");
+                       if (loop != 0 ||
+                           length < 1 ||
+                           length > 7 ||
+                           (unsigned long) addr < 4096)
+                               break;
+
+                       if (gdbstub_set_breakpoint((u8 *) addr, length) < 0)
+                               break;
+
+                       gdbstub_strcpy(output_buffer, "OK");
+                       break;
+
+                       /*
+                        * Clear breakpoint
+                        */
+               case 'z':
+                       ptr = &input_buffer[1];
+
+                       if (!hexToInt(&ptr, &loop) || *ptr++ != ',' ||
+                           !hexToInt(&ptr, &addr) || *ptr++ != ',' ||
+                           !hexToInt(&ptr, &length)
+                           ) {
+                               gdbstub_strcpy(output_buffer, "E01");
+                               break;
+                       }
+
+                       /* only support software breakpoints */
+                       gdbstub_strcpy(output_buffer, "E03");
+                       if (loop != 0 ||
+                           length < 1 ||
+                           length > 7 ||
+                           (unsigned long) addr < 4096)
+                               break;
+
+                       if (gdbstub_clear_breakpoint((u8 *) addr, length) < 0)
+                               break;
+
+                       gdbstub_strcpy(output_buffer, "OK");
+                       break;
+
+               default:
+                       gdbstub_proto("### GDB Unsupported Cmd '%s'\n",
+                                     input_buffer);
+                       break;
+               }
+
+               /* reply to the request */
+               putpacket(output_buffer);
+       }
+
+done:
+       /*
+        * Need to flush the instruction cache here, as we may
+        * have deposited a breakpoint, and the icache probably
+        * has no way of knowing that a data ref to some location
+        * may have changed something that is in the instruction
+        * cache.
+        * NB: We flush both caches, just to be sure...
+        */
+       if (gdbstub_flush_caches)
+               gdbstub_purge_cache();
+
+       gdbstub_load_fpu();
+       mn10300_set_gdbleds(0);
+       if (excep == EXCEP_NMI)
+               NMICR = NMICR_NMIF;
+
+       touch_softlockup_watchdog();
+
+       local_irq_restore(epsw);
+       return 1;
+}
+
+/*
+ * handle event interception
+ */
+asmlinkage int gdbstub_intercept(struct pt_regs *regs,
+                                enum exception_code excep)
+{
+       static u8 notfirst = 1;
+       int ret;
+
+       if (gdbstub_busy)
+               gdbstub_printk("--> gdbstub reentered itself\n");
+       gdbstub_busy = 1;
+
+       if (notfirst) {
+               unsigned long mdr;
+               asm("mov mdr,%0" : "=d"(mdr));
+
+               gdbstub_entry(
+                       "--> gdbstub_intercept(%p,%04x) [MDR=%lx PC=%lx]\n",
+                       regs, excep, mdr, regs->pc);
+
+               gdbstub_entry(
+                       "PC:  %08lx EPSW:  %08lx  SSP: %08lx mode: %s\n",
+                       regs->pc, regs->epsw, (unsigned long) &ret,
+                       user_mode(regs) ? "User" : "Super");
+               gdbstub_entry(
+                       "d0:  %08lx   d1:  %08lx   d2: %08lx   d3: %08lx\n",
+                       regs->d0, regs->d1, regs->d2, regs->d3);
+               gdbstub_entry(
+                       "a0:  %08lx   a1:  %08lx   a2: %08lx   a3: %08lx\n",
+                       regs->a0, regs->a1, regs->a2, regs->a3);
+               gdbstub_entry(
+                       "e0:  %08lx   e1:  %08lx   e2: %08lx   e3: %08lx\n",
+                       regs->e0, regs->e1, regs->e2, regs->e3);
+               gdbstub_entry(
+                       "e4:  %08lx   e5:  %08lx   e6: %08lx   e7: %08lx\n",
+                       regs->e4, regs->e5, regs->e6, regs->e7);
+               gdbstub_entry(
+                       "lar: %08lx   lir: %08lx  mdr: %08lx  usp: %08lx\n",
+                       regs->lar, regs->lir, regs->mdr, regs->sp);
+               gdbstub_entry(
+                       "cvf: %08lx   crl: %08lx  crh: %08lx  drq: %08lx\n",
+                       regs->mcvf, regs->mcrl, regs->mcrh, regs->mdrq);
+               gdbstub_entry(
+                       "threadinfo=%p task=%p)\n",
+                       current_thread_info(), current);
+       } else {
+               notfirst = 1;
+       }
+
+       ret = gdbstub(regs, excep);
+
+       gdbstub_entry("<-- gdbstub_intercept()\n");
+       gdbstub_busy = 0;
+       return ret;
+}
+
+/*
+ * handle the GDB stub itself causing an exception
+ */
+asmlinkage void gdbstub_exception(struct pt_regs *regs,
+                                 enum exception_code excep)
+{
+       unsigned long mdr;
+
+       asm("mov mdr,%0" : "=d"(mdr));
+       gdbstub_entry("--> gdbstub exception({%p},%04x) [MDR=%lx]\n",
+                     regs, excep, mdr);
+
+       while ((unsigned long) regs == 0xffffffff) {}
+
+       /* handle guarded memory accesses where we know it might fault */
+       if (regs->pc == (unsigned) gdbstub_read_byte_guard) {
+               regs->pc = (unsigned) gdbstub_read_byte_cont;
+               goto fault;
+       }
+
+       if (regs->pc == (unsigned) gdbstub_read_word_guard) {
+               regs->pc = (unsigned) gdbstub_read_word_cont;
+               goto fault;
+       }
+
+       if (regs->pc == (unsigned) gdbstub_read_dword_guard) {
+               regs->pc = (unsigned) gdbstub_read_dword_cont;
+               goto fault;
+       }
+
+       if (regs->pc == (unsigned) gdbstub_write_byte_guard) {
+               regs->pc = (unsigned) gdbstub_write_byte_cont;
+               goto fault;
+       }
+
+       if (regs->pc == (unsigned) gdbstub_write_word_guard) {
+               regs->pc = (unsigned) gdbstub_write_word_cont;
+               goto fault;
+       }
+
+       if (regs->pc == (unsigned) gdbstub_write_dword_guard) {
+               regs->pc = (unsigned) gdbstub_write_dword_cont;
+               goto fault;
+       }
+
+       gdbstub_printk("\n### GDB stub caused an exception ###\n");
+
+       /* something went horribly wrong */
+       console_verbose();
+       show_registers(regs);
+
+       panic("GDB Stub caused an unexpected exception - can't continue\n");
+
+       /* we caught an attempt by the stub to access silly memory */
+fault:
+       gdbstub_entry("<-- gdbstub exception() = EFAULT\n");
+       regs->d0 = -EFAULT;
+       return;
+}
+
+/*
+ * send an exit message to GDB
+ */
+void gdbstub_exit(int status)
+{
+       unsigned char checksum;
+       unsigned char ch;
+       int count;
+
+       gdbstub_busy = 1;
+       output_buffer[0] = 'W';
+       output_buffer[1] = hexchars[(status >> 4) & 0x0F];
+       output_buffer[2] = hexchars[status & 0x0F];
+       output_buffer[3] = 0;
+
+       gdbstub_io_tx_char('$');
+       checksum = 0;
+       count = 0;
+
+       while ((ch = output_buffer[count]) != 0) {
+               gdbstub_io_tx_char(ch);
+               checksum += ch;
+               count += 1;
+       }
+
+       gdbstub_io_tx_char('#');
+       gdbstub_io_tx_char(hexchars[checksum >> 4]);
+       gdbstub_io_tx_char(hexchars[checksum & 0xf]);
+
+       /* make sure the output is flushed, or else RedBoot might clobber it */
+       gdbstub_io_tx_flush();
+
+       gdbstub_busy = 0;
+}
+
+/*
+ * initialise the GDB stub
+ */
+asmlinkage void __init gdbstub_init(void)
+{
+#ifdef CONFIG_GDBSTUB_IMMEDIATE
+       unsigned char ch;
+       int ret;
+#endif
+
+       gdbstub_busy = 1;
+
+       printk(KERN_INFO "%s", gdbstub_banner);
+
+       gdbstub_io_init();
+
+       gdbstub_entry("--> gdbstub_init\n");
+
+       /* try to talk to GDB (or anyone insane enough to want to type GDB
+        * protocol by hand) */
+       gdbstub_io("### GDB Tx ACK\n");
+       gdbstub_io_tx_char('+'); /* 'hello world' */
+
+#ifdef CONFIG_GDBSTUB_IMMEDIATE
+       gdbstub_printk("GDB Stub waiting for packet\n");
+
+       /* in case GDB is started before us, ACK any packets that are already
+        * sitting there (presumably "$?#xx")
+        */
+       do { gdbstub_io_rx_char(&ch, 0); } while (ch != '$');
+       do { gdbstub_io_rx_char(&ch, 0); } while (ch != '#');
+       /* eat first csum byte */
+       do { ret = gdbstub_io_rx_char(&ch, 0); } while (ret != 0);
+       /* eat second csum byte */
+       do { ret = gdbstub_io_rx_char(&ch, 0); } while (ret != 0);
+
+       gdbstub_io("### GDB Tx NAK\n");
+       gdbstub_io_tx_char('-'); /* NAK it */
+
+#else
+       printk("GDB Stub ready\n");
+#endif
+
+       gdbstub_busy = 0;
+       gdbstub_entry("<-- gdbstub_init\n");
+}
+
+/*
+ * register the console at a more appropriate time
+ */
+#ifdef CONFIG_GDBSTUB_CONSOLE
+static int __init gdbstub_postinit(void)
+{
+       printk(KERN_NOTICE "registering console\n");
+       register_console(&gdbstub_console);
+       return 0;
+}
+
+__initcall(gdbstub_postinit);
+#endif
+
+/*
+ * handle character reception on GDB serial port
+ * - jump into the GDB stub if BREAK is detected on the serial line
+ */
+asmlinkage void gdbstub_rx_irq(struct pt_regs *regs, enum exception_code excep)
+{
+       char ch;
+       int ret;
+
+       gdbstub_entry("--> gdbstub_rx_irq\n");
+
+       do {
+               ret = gdbstub_io_rx_char(&ch, 1);
+               if (ret != -EIO && ret != -EAGAIN) {
+                       if (ret != -EINTR)
+                               gdbstub_rx_unget = ch;
+                       gdbstub(regs, excep);
+               }
+       } while (ret != -EAGAIN);
+
+       gdbstub_entry("<-- gdbstub_rx_irq\n");
+}
diff --git a/arch/mn10300/kernel/head.S b/arch/mn10300/kernel/head.S
new file mode 100644 (file)
index 0000000..606bd8c
--- /dev/null
@@ -0,0 +1,255 @@
+/* Boot entry point for MN10300 kernel
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <linux/linkage.h>
+#include <linux/serial_reg.h>
+#include <asm/thread_info.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/frame.inc>
+#include <asm/param.h>
+#include <asm/unit/serial.h>
+
+       .section .text.head,"ax"
+
+###############################################################################
+#
+# bootloader entry point
+#
+###############################################################################
+       .globl  _start
+       .type   _start,@function
+_start:
+       # save commandline pointer
+       mov     d0,a3
+
+       # preload the PGD pointer register
+       mov     swapper_pg_dir,d0
+       mov     d0,(PTBR)
+
+       # turn on the TLBs
+       mov     MMUCTR_IIV|MMUCTR_DIV,d0
+       mov     d0,(MMUCTR)
+       mov     MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE,d0
+       mov     d0,(MMUCTR)
+
+       # turn on AM33v2 exception handling mode and set the trap table base
+       movhu   (CPUP),d0
+       or      CPUP_EXM_AM33V2,d0
+       movhu   d0,(CPUP)
+       mov     CONFIG_INTERRUPT_VECTOR_BASE,d0
+       mov     d0,(TBR)
+
+       # invalidate and enable both of the caches
+       mov     CHCTR,a0
+       clr     d0
+       movhu   d0,(a0)                                 # turn off first
+       mov     CHCTR_ICINV|CHCTR_DCINV,d0
+       movhu   d0,(a0)
+       setlb
+       mov     (a0),d0
+       btst    CHCTR_ICBUSY|CHCTR_DCBUSY,d0            # wait till not busy
+       lne
+
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+#ifdef CONFIG_MN10300_CACHE_WBACK
+#ifndef CONFIG_MN10300_CACHE_WBACK_NOWRALLOC
+       mov     CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0
+#else
+       mov     CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK|CHCTR_DCALMD,d0
+#endif /* CACHE_DISABLED */
+#else
+       mov     CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0
+#endif /* WBACK */
+       movhu   d0,(a0)                                 # enable
+#endif /* NOWRALLOC */
+
+       # turn on RTS on the debug serial port if applicable
+#ifdef CONFIG_MN10300_UNIT_ASB2305
+       bset    UART_MCR_RTS,(ASB2305_DEBUG_MCR)
+#endif
+
+       # clear the BSS area
+       mov     __bss_start,a0
+       mov     __bss_stop,a1
+       clr     d0
+bssclear:
+       cmp     a1,a0
+       bge     bssclear_end
+       mov     d0,(a0)
+       inc4    a0
+       bra     bssclear
+bssclear_end:
+
+       # retrieve the parameters (including command line) before we overwrite
+       # them
+       cmp     0xabadcafe,d1
+       bne     __no_parameters
+
+__copy_parameters:
+       mov     redboot_command_line,a0
+       mov     a0,a1
+       add     COMMAND_LINE_SIZE,a1
+1:
+       movbu   (a3),d0
+       inc     a3
+       movbu   d0,(a0)
+       inc     a0
+       cmp     a1,a0
+       blt     1b
+
+       mov     redboot_platform_name,a0
+       mov     a0,a1
+       add     COMMAND_LINE_SIZE,a1
+       mov     d2,a3
+1:
+       movbu   (a3),d0
+       inc     a3
+       movbu   d0,(a0)
+       inc     a0
+       cmp     a1,a0
+       blt     1b
+
+__no_parameters:
+
+       # set up the registers with recognisable rubbish in them
+       mov     init_thread_union+THREAD_SIZE-12,sp
+
+       mov     0xea01eaea,d0
+       mov     d0,(4,sp)               # EPSW save area
+       mov     0xea02eaea,d0
+       mov     d0,(8,sp)               # PC save area
+
+       mov     0xeb0060ed,d0
+       mov     d0,mdr
+       mov     0xeb0061ed,d0
+       mov     d0,mdrq
+       mov     0xeb0062ed,d0
+       mov     d0,mcrh
+       mov     0xeb0063ed,d0
+       mov     d0,mcrl
+       mov     0xeb0064ed,d0
+       mov     d0,mcvf
+       mov     0xed0065ed,a3
+       mov     a3,usp
+
+       mov     0xed00e0ed,e0
+       mov     0xed00e1ed,e1
+       mov     0xed00e2ed,e2
+       mov     0xed00e3ed,e3
+       mov     0xed00e4ed,e4
+       mov     0xed00e5ed,e5
+       mov     0xed00e6ed,e6
+       mov     0xed00e7ed,e7
+
+       mov     0xed00d0ed,d0
+       mov     0xed00d1ed,d1
+       mov     0xed00d2ed,d2
+       mov     0xed00d3ed,d3
+       mov     0xed00a0ed,a0
+       mov     0xed00a1ed,a1
+       mov     0xed00a2ed,a2
+       mov     0,a3
+
+       # set up the initial kernel stack
+       SAVE_ALL
+       mov     0xffffffff,d0
+       mov     d0,(REG_ORIG_D0,fp)
+
+       # put different recognisable rubbish in the regs
+       mov     0xfb0060ed,d0
+       mov     d0,mdr
+       mov     0xfb0061ed,d0
+       mov     d0,mdrq
+       mov     0xfb0062ed,d0
+       mov     d0,mcrh
+       mov     0xfb0063ed,d0
+       mov     d0,mcrl
+       mov     0xfb0064ed,d0
+       mov     d0,mcvf
+       mov     0xfd0065ed,a0
+       mov     a0,usp
+
+       mov     0xfd00e0ed,e0
+       mov     0xfd00e1ed,e1
+       mov     0xfd00e2ed,e2
+       mov     0xfd00e3ed,e3
+       mov     0xfd00e4ed,e4
+       mov     0xfd00e5ed,e5
+       mov     0xfd00e6ed,e6
+       mov     0xfd00e7ed,e7
+
+       mov     0xfd00d0ed,d0
+       mov     0xfd00d1ed,d1
+       mov     0xfd00d2ed,d2
+       mov     0xfd00d3ed,d3
+       mov     0xfd00a0ed,a0
+       mov     0xfd00a1ed,a1
+       mov     0xfd00a2ed,a2
+
+       # we may be holding current in E2
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+       mov     init_task,e2
+#endif
+
+       # initialise the processor and the unit
+       call    processor_init[],0
+       call    unit_init[],0
+
+#ifdef CONFIG_GDBSTUB
+       call    gdbstub_init[],0
+
+#ifdef CONFIG_GDBSTUB_IMMEDIATE
+       .globl  __gdbstub_pause
+__gdbstub_pause:
+       bra     __gdbstub_pause
+#endif
+#endif
+
+       jmp     start_kernel
+       .size   _start, _start-.
+ENTRY(__head_end)
+
+/*
+ * This is initialized to disallow all access to the low 2G region
+ * - the high 2G region is managed directly by the MMU
+ * - range 0x70000000-0x7C000000 are initialised for use by VMALLOC
+ */
+       .section .bss
+       .balign PAGE_SIZE
+ENTRY(swapper_pg_dir)
+        .space PTRS_PER_PGD*4
+
+/*
+ * The page tables are initialized to only 8MB here - the final page
+ * tables are set up later depending on memory size.
+ */
+
+       .balign PAGE_SIZE
+ENTRY(empty_zero_page)
+       .space PAGE_SIZE
+
+       .balign PAGE_SIZE
+ENTRY(empty_bad_page)
+       .space PAGE_SIZE
+
+       .balign PAGE_SIZE
+ENTRY(empty_bad_pte_table)
+       .space PAGE_SIZE
+
+       .balign PAGE_SIZE
+ENTRY(large_page_table)
+       .space PAGE_SIZE
+
+       .balign PAGE_SIZE
+ENTRY(kernel_vmalloc_ptes)
+       .space ((VMALLOC_END-VMALLOC_START)/PAGE_SIZE)*4
diff --git a/arch/mn10300/kernel/init_task.c b/arch/mn10300/kernel/init_task.c
new file mode 100644 (file)
index 0000000..39fe688
--- /dev/null
@@ -0,0 +1,45 @@
+/* MN10300 Initial task definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/init_task.h>
+#include <linux/fs.h>
+#include <linux/mqueue.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+
+static struct fs_struct init_fs = INIT_FS;
+static struct files_struct init_files = INIT_FILES;
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+struct mm_struct init_mm = INIT_MM(init_mm);
+EXPORT_SYMBOL(init_mm);
+
+/*
+ * Initial thread structure.
+ *
+ * We need to make sure that this is THREAD_SIZE aligned due to the
+ * way process stacks are handled. This is done by having a special
+ * "init_task" linker map entry..
+ */
+union thread_union init_thread_union
+       __attribute__((__section__(".data.init_task"))) =
+               { INIT_THREAD_INFO(init_task) };
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);
+EXPORT_SYMBOL(init_task);
diff --git a/arch/mn10300/kernel/internal.h b/arch/mn10300/kernel/internal.h
new file mode 100644 (file)
index 0000000..eee2eee
--- /dev/null
@@ -0,0 +1,20 @@
+/* Internal definitions for the arch part of the core kernel
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+/*
+ * kthread.S
+ */
+extern int kernel_thread_helper(int);
+
+/*
+ * entry.S
+ */
+extern void ret_from_fork(struct task_struct *) __attribute__((noreturn));
diff --git a/arch/mn10300/kernel/io.c b/arch/mn10300/kernel/io.c
new file mode 100644 (file)
index 0000000..e96fdf6
--- /dev/null
@@ -0,0 +1,30 @@
+/* MN10300 Misaligned multibyte-word I/O
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+
+/*
+ * output data from a potentially misaligned buffer
+ */
+void __outsl(unsigned long addr, const void *buffer, int count)
+{
+       const unsigned char *buf = buffer;
+       unsigned long val;
+
+       while (count--) {
+               memcpy(&val, buf, 4);
+               outl(val, addr);
+               buf += 4;
+       }
+}
+EXPORT_SYMBOL(__outsl);
diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c
new file mode 100644 (file)
index 0000000..761c434
--- /dev/null
@@ -0,0 +1,235 @@
+/* MN10300 Arch-specific interrupt handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/seq_file.h>
+#include <asm/setup.h>
+
+unsigned long __mn10300_irq_enabled_epsw = EPSW_IE | EPSW_IM_7;
+EXPORT_SYMBOL(__mn10300_irq_enabled_epsw);
+
+atomic_t irq_err_count;
+
+/*
+ * MN10300 INTC controller operations
+ */
+static void mn10300_cpupic_disable(unsigned int irq)
+{
+       u16 tmp = GxICR(irq);
+       GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT;
+       tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_enable(unsigned int irq)
+{
+       u16 tmp = GxICR(irq);
+       GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
+       tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_ack(unsigned int irq)
+{
+       u16 tmp;
+       *(volatile u8 *) &GxICR(irq) = GxICR_DETECT;
+       tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_mask(unsigned int irq)
+{
+       u16 tmp = GxICR(irq);
+       GxICR(irq) = (tmp & GxICR_LEVEL);
+       tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_mask_ack(unsigned int irq)
+{
+       u16 tmp = GxICR(irq);
+       GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT;
+       tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_unmask(unsigned int irq)
+{
+       u16 tmp = GxICR(irq);
+       GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT;
+       tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_end(unsigned int irq)
+{
+       u16 tmp = GxICR(irq);
+       GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
+       tmp = GxICR(irq);
+}
+
+static struct irq_chip mn10300_cpu_pic = {
+       .name           = "cpu",
+       .disable        = mn10300_cpupic_disable,
+       .enable         = mn10300_cpupic_enable,
+       .ack            = mn10300_cpupic_ack,
+       .mask           = mn10300_cpupic_mask,
+       .mask_ack       = mn10300_cpupic_mask_ack,
+       .unmask         = mn10300_cpupic_unmask,
+       .end            = mn10300_cpupic_end,
+};
+
+/*
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves.
+ */
+void ack_bad_irq(int irq)
+{
+       printk(KERN_WARNING "unexpected IRQ trap at vector %02x\n", irq);
+}
+
+/*
+ * change the level at which an IRQ executes
+ * - must not be called whilst interrupts are being processed!
+ */
+void set_intr_level(int irq, u16 level)
+{
+       u16 tmp;
+
+       if (in_interrupt())
+               BUG();
+
+       tmp = GxICR(irq);
+       GxICR(irq) = (tmp & GxICR_ENABLE) | level;
+       tmp = GxICR(irq);
+}
+
+/*
+ * mark an interrupt to be ACK'd after interrupt handlers have been run rather
+ * than before
+ * - see Documentation/mn10300/features.txt
+ */
+void set_intr_postackable(int irq)
+{
+       set_irq_handler(irq, handle_level_irq);
+}
+
+/*
+ * initialise the interrupt system
+ */
+void __init init_IRQ(void)
+{
+       int irq;
+
+       for (irq = 0; irq < NR_IRQS; irq++)
+               if (irq_desc[irq].chip == &no_irq_type)
+                       set_irq_chip_and_handler(irq, &mn10300_cpu_pic,
+                                                handle_edge_irq);
+       unit_init_IRQ();
+}
+
+/*
+ * handle normal device IRQs
+ */
+asmlinkage void do_IRQ(void)
+{
+       unsigned long sp, epsw, irq_disabled_epsw, old_irq_enabled_epsw;
+       int irq;
+
+       sp = current_stack_pointer();
+       if (sp - (sp & ~(THREAD_SIZE - 1)) < STACK_WARN)
+               BUG();
+
+       /* make sure local_irq_enable() doesn't muck up the interrupt priority
+        * setting in EPSW */
+       old_irq_enabled_epsw = __mn10300_irq_enabled_epsw;
+       local_save_flags(epsw);
+       __mn10300_irq_enabled_epsw = EPSW_IE | (EPSW_IM & epsw);
+       irq_disabled_epsw = EPSW_IE | MN10300_CLI_LEVEL;
+
+       __IRQ_STAT(smp_processor_id(), __irq_count)++;
+
+       irq_enter();
+
+       for (;;) {
+               /* ask the interrupt controller for the next IRQ to process
+                * - the result we get depends on EPSW.IM
+                */
+               irq = IAGR & IAGR_GN;
+               if (!irq)
+                       break;
+
+               local_irq_restore(irq_disabled_epsw);
+
+               generic_handle_irq(irq >> 2);
+
+               /* restore IRQ controls for IAGR access */
+               local_irq_restore(epsw);
+       }
+
+       __mn10300_irq_enabled_epsw = old_irq_enabled_epsw;
+
+       irq_exit();
+}
+
+/*
+ * Display interrupt management information through /proc/interrupts
+ */
+int show_interrupts(struct seq_file *p, void *v)
+{
+       int i = *(loff_t *) v, j, cpu;
+       struct irqaction *action;
+       unsigned long flags;
+
+       switch (i) {
+               /* display column title bar naming CPUs */
+       case 0:
+               seq_printf(p, "           ");
+               for (j = 0; j < NR_CPUS; j++)
+                       if (cpu_online(j))
+                               seq_printf(p, "CPU%d       ", j);
+               seq_putc(p, '\n');
+               break;
+
+               /* display information rows, one per active CPU */
+       case 1 ... NR_IRQS - 1:
+               spin_lock_irqsave(&irq_desc[i].lock, flags);
+
+               action = irq_desc[i].action;
+               if (action) {
+                       seq_printf(p, "%3d: ", i);
+                       for_each_present_cpu(cpu)
+                               seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]);
+                       seq_printf(p, " %14s.%u", irq_desc[i].chip->name,
+                                  (GxICR(i) & GxICR_LEVEL) >>
+                                  GxICR_LEVEL_SHIFT);
+                       seq_printf(p, "  %s", action->name);
+
+                       for (action = action->next;
+                            action;
+                            action = action->next)
+                               seq_printf(p, ", %s", action->name);
+
+                       seq_putc(p, '\n');
+               }
+
+               spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+               break;
+
+               /* polish off with NMI and error counters */
+       case NR_IRQS:
+               seq_printf(p, "NMI: ");
+               for (j = 0; j < NR_CPUS; j++)
+                       if (cpu_online(j))
+                               seq_printf(p, "%10u ", nmi_count(j));
+               seq_putc(p, '\n');
+
+               seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
+               break;
+       }
+
+       return 0;
+}
diff --git a/arch/mn10300/kernel/kernel_execve.S b/arch/mn10300/kernel/kernel_execve.S
new file mode 100644 (file)
index 0000000..86039f1
--- /dev/null
@@ -0,0 +1,37 @@
+/* MN10300 In-kernel program execution
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/linkage.h>
+#include <asm/unistd.h>
+
+###############################################################################
+#
+# Do a system call from kernel instead of calling sys_execve so we end up with
+# proper pt_regs.
+#
+# int kernel_execve(const char *filename, char *const argv[],
+#                  char *const envp[])
+#
+# On entry: D0/D1/8(SP): arguments to function
+# On return: D0: syscall return.
+#
+###############################################################################
+       .globl          kernel_execve
+       .type           kernel_execve,@function
+kernel_execve:
+       mov             a3,a1
+       mov             d0,a0
+       mov             (12,sp),a3
+       mov             +__NR_execve,d0
+       syscall         0
+       mov             a1,a3
+       rets
+
+       .size           kernel_execve,.-kernel_execve
diff --git a/arch/mn10300/kernel/kprobes.c b/arch/mn10300/kernel/kprobes.c
new file mode 100644 (file)
index 0000000..dacafab
--- /dev/null
@@ -0,0 +1,653 @@
+/* MN10300 Kernel probes implementation
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public Licence as published by
+ * the Free Software Foundation; either version 2 of the Licence, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public Licence for more details.
+ *
+ * You should have received a copy of the GNU General Public Licence
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/kprobes.h>
+#include <linux/ptrace.h>
+#include <linux/spinlock.h>
+#include <linux/preempt.h>
+#include <linux/kdebug.h>
+#include <asm/cacheflush.h>
+
+struct kretprobe_blackpoint kretprobe_blacklist[] = { { NULL, NULL } };
+const int kretprobe_blacklist_size = ARRAY_SIZE(kretprobe_blacklist);
+
+/* kprobe_status settings */
+#define KPROBE_HIT_ACTIVE      0x00000001
+#define KPROBE_HIT_SS          0x00000002
+
+static struct kprobe *current_kprobe;
+static unsigned long current_kprobe_orig_pc;
+static unsigned long current_kprobe_next_pc;
+static int current_kprobe_ss_flags;
+static unsigned long kprobe_status;
+static kprobe_opcode_t current_kprobe_ss_buf[MAX_INSN_SIZE + 2];
+static unsigned long current_kprobe_bp_addr;
+
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+
+
+/* singlestep flag bits */
+#define SINGLESTEP_BRANCH 1
+#define SINGLESTEP_PCREL  2
+
+#define READ_BYTE(p, valp) \
+       do { *(u8 *)(valp) = *(u8 *)(p); } while (0)
+
+#define READ_WORD16(p, valp)                                   \
+       do {                                                    \
+               READ_BYTE((p), (valp));                         \
+               READ_BYTE((u8 *)(p) + 1, (u8 *)(valp) + 1);     \
+       } while (0)
+
+#define READ_WORD32(p, valp)                                   \
+       do {                                                    \
+               READ_BYTE((p), (valp));                         \
+               READ_BYTE((u8 *)(p) + 1, (u8 *)(valp) + 1);     \
+               READ_BYTE((u8 *)(p) + 2, (u8 *)(valp) + 2);     \
+               READ_BYTE((u8 *)(p) + 3, (u8 *)(valp) + 3);     \
+       } while (0)
+
+
+static const u8 mn10300_insn_sizes[256] =
+{
+       /* 1  2  3  4  5  6  7  8  9  a  b  c  d  e  f */
+       1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, /* 0 */
+       1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 1 */
+       2, 2, 2, 2, 3, 3, 3, 3, 2, 2, 2, 2, 3, 3, 3, 3, /* 2 */
+       3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 1, 1, 1, 1, /* 3 */
+       1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, /* 4 */
+       1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, /* 5 */
+       1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 6 */
+       1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 7 */
+       2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 8 */
+       2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 9 */
+       2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* a */
+       2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* b */
+       0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 2, 2, /* c */
+       0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* d */
+       1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* e */
+       0, 2, 2, 2, 2, 2, 2, 4, 0, 3, 0, 4, 0, 6, 7, 1  /* f */
+};
+
+#define LT (1 << 0)
+#define GT (1 << 1)
+#define GE (1 << 2)
+#define LE (1 << 3)
+#define CS (1 << 4)
+#define HI (1 << 5)
+#define CC (1 << 6)
+#define LS (1 << 7)
+#define EQ (1 << 8)
+#define NE (1 << 9)
+#define RA (1 << 10)
+#define VC (1 << 11)
+#define VS (1 << 12)
+#define NC (1 << 13)
+#define NS (1 << 14)
+
+static const u16 cond_table[] = {
+       /*  V  C  N  Z  */
+       /*  0  0  0  0  */ (NE | NC | CC | VC | GE | GT | HI),
+       /*  0  0  0  1  */ (EQ | NC | CC | VC | GE | LE | LS),
+       /*  0  0  1  0  */ (NE | NS | CC | VC | LT | LE | HI),
+       /*  0  0  1  1  */ (EQ | NS | CC | VC | LT | LE | LS),
+       /*  0  1  0  0  */ (NE | NC | CS | VC | GE | GT | LS),
+       /*  0  1  0  1  */ (EQ | NC | CS | VC | GE | LE | LS),
+       /*  0  1  1  0  */ (NE | NS | CS | VC | LT | LE | LS),
+       /*  0  1  1  1  */ (EQ | NS | CS | VC | LT | LE | LS),
+       /*  1  0  0  0  */ (NE | NC | CC | VS | LT | LE | HI),
+       /*  1  0  0  1  */ (EQ | NC | CC | VS | LT | LE | LS),
+       /*  1  0  1  0  */ (NE | NS | CC | VS | GE | GT | HI),
+       /*  1  0  1  1  */ (EQ | NS | CC | VS | GE | LE | LS),
+       /*  1  1  0  0  */ (NE | NC | CS | VS | LT | LE | LS),
+       /*  1  1  0  1  */ (EQ | NC | CS | VS | LT | LE | LS),
+       /*  1  1  1  0  */ (NE | NS | CS | VS | GE | GT | LS),
+       /*  1  1  1  1  */ (EQ | NS | CS | VS | GE | LE | LS),
+};
+
+/*
+ * Calculate what the PC will be after executing next instruction
+ */
+static unsigned find_nextpc(struct pt_regs *regs, int *flags)
+{
+       unsigned size;
+       s8  x8;
+       s16 x16;
+       s32 x32;
+       u8 opc, *pc, *sp, *next;
+
+       next = 0;
+       *flags = SINGLESTEP_PCREL;
+
+       pc = (u8 *) regs->pc;
+       sp = (u8 *) (regs + 1);
+       opc = *pc;
+
+       size = mn10300_insn_sizes[opc];
+       if (size > 0) {
+               next = pc + size;
+       } else {
+               switch (opc) {
+                       /* Bxx (d8,PC) */
+               case 0xc0 ... 0xca:
+                       x8 = 2;
+                       if (cond_table[regs->epsw & 0xf] & (1 << (opc & 0xf)))
+                               x8 = (s8)pc[1];
+                       next = pc + x8;
+                       *flags |= SINGLESTEP_BRANCH;
+                       break;
+
+                       /* JMP (d16,PC) or CALL (d16,PC) */
+               case 0xcc:
+               case 0xcd:
+                       READ_WORD16(pc + 1, &x16);
+                       next = pc + x16;
+                       *flags |= SINGLESTEP_BRANCH;
+                       break;
+
+                       /* JMP (d32,PC) or CALL (d32,PC) */
+               case 0xdc:
+               case 0xdd:
+                       READ_WORD32(pc + 1, &x32);
+                       next = pc + x32;
+                       *flags |= SINGLESTEP_BRANCH;
+                       break;
+
+                       /* RETF */
+               case 0xde:
+                       next = (u8 *)regs->mdr;
+                       *flags &= ~SINGLESTEP_PCREL;
+                       *flags |= SINGLESTEP_BRANCH;
+                       break;
+
+                       /* RET */
+               case 0xdf:
+                       sp += pc[2];
+                       READ_WORD32(sp, &x32);
+                       next = (u8 *)x32;
+                       *flags &= ~SINGLESTEP_PCREL;
+                       *flags |= SINGLESTEP_BRANCH;
+                       break;
+
+               case 0xf0:
+                       next = pc + 2;
+                       opc = pc[1];
+                       if (opc >= 0xf0 && opc <= 0xf7) {
+                               /* JMP (An) / CALLS (An) */
+                               switch (opc & 3) {
+                               case 0:
+                                       next = (u8 *)regs->a0;
+                                       break;
+                               case 1:
+                                       next = (u8 *)regs->a1;
+                                       break;
+                               case 2:
+                                       next = (u8 *)regs->a2;
+                                       break;
+                               case 3:
+                                       next = (u8 *)regs->a3;
+                                       break;
+                               }
+                               *flags &= ~SINGLESTEP_PCREL;
+                               *flags |= SINGLESTEP_BRANCH;
+                       } else if (opc == 0xfc) {
+                               /* RETS */
+                               READ_WORD32(sp, &x32);
+                               next = (u8 *)x32;
+                               *flags &= ~SINGLESTEP_PCREL;
+                               *flags |= SINGLESTEP_BRANCH;
+                       } else if (opc == 0xfd) {
+                               /* RTI */
+                               READ_WORD32(sp + 4, &x32);
+                               next = (u8 *)x32;
+                               *flags &= ~SINGLESTEP_PCREL;
+                               *flags |= SINGLESTEP_BRANCH;
+                       }
+                       break;
+
+                       /* potential 3-byte conditional branches */
+               case 0xf8:
+                       next = pc + 3;
+                       opc = pc[1];
+                       if (opc >= 0xe8 && opc <= 0xeb &&
+                           (cond_table[regs->epsw & 0xf] &
+                            (1 << ((opc & 0xf) + 3)))
+                           ) {
+                               READ_BYTE(pc+2, &x8);
+                               next = pc + x8;
+                               *flags |= SINGLESTEP_BRANCH;
+                       }
+                       break;
+
+               case 0xfa:
+                       if (pc[1] == 0xff) {
+                               /* CALLS (d16,PC) */
+                               READ_WORD16(pc + 2, &x16);
+                               next = pc + x16;
+                       } else
+                               next = pc + 4;
+                       *flags |= SINGLESTEP_BRANCH;
+                       break;
+
+               case 0xfc:
+                       x32 = 6;
+                       if (pc[1] == 0xff) {
+                               /* CALLS (d32,PC) */
+                               READ_WORD32(pc + 2, &x32);
+                       }
+                       next = pc + x32;
+                       *flags |= SINGLESTEP_BRANCH;
+                       break;
+                       /* LXX (d8,PC) */
+                       /* SETLB - loads the next four bytes into the LIR reg */
+               case 0xd0 ... 0xda:
+               case 0xdb:
+                       panic("Can't singlestep Lxx/SETLB\n");
+                       break;
+               }
+       }
+       return (unsigned)next;
+
+}
+
+/*
+ * set up out of place singlestep of some branching instructions
+ */
+static unsigned __kprobes singlestep_branch_setup(struct pt_regs *regs)
+{
+       u8 opc, *pc, *sp, *next;
+
+       next = NULL;
+       pc = (u8 *) regs->pc;
+       sp = (u8 *) (regs + 1);
+
+       switch (pc[0]) {
+       case 0xc0 ... 0xca:     /* Bxx (d8,PC) */
+       case 0xcc:              /* JMP (d16,PC) */
+       case 0xdc:              /* JMP (d32,PC) */
+       case 0xf8:              /* Bxx (d8,PC)  3-byte version */
+               /* don't really need to do anything except cause trap  */
+               next = pc;
+               break;
+
+       case 0xcd:              /* CALL (d16,PC) */
+               pc[1] = 5;
+               pc[2] = 0;
+               next = pc + 5;
+               break;
+
+       case 0xdd:              /* CALL (d32,PC) */
+               pc[1] = 7;
+               pc[2] = 0;
+               pc[3] = 0;
+               pc[4] = 0;
+               next = pc + 7;
+               break;
+
+       case 0xde:              /* RETF */
+               next = pc + 3;
+               regs->mdr = (unsigned) next;
+               break;
+
+       case 0xdf:              /* RET */
+               sp += pc[2];
+               next = pc + 3;
+               *(unsigned *)sp = (unsigned) next;
+               break;
+
+       case 0xf0:
+               next = pc + 2;
+               opc = pc[1];
+               if (opc >= 0xf0 && opc <= 0xf3) {
+                       /* CALLS (An) */
+                       /* use CALLS (d16,PC) to avoid mucking with An */
+                       pc[0] = 0xfa;
+                       pc[1] = 0xff;
+                       pc[2] = 4;
+                       pc[3] = 0;
+                       next = pc + 4;
+               } else if (opc >= 0xf4 && opc <= 0xf7) {
+                       /* JMP (An) */
+                       next = pc;
+               } else if (opc == 0xfc) {
+                       /* RETS */
+                       next = pc + 2;
+                       *(unsigned *) sp = (unsigned) next;
+               } else if (opc == 0xfd) {
+                       /* RTI */
+                       next = pc + 2;
+                       *(unsigned *)(sp + 4) = (unsigned) next;
+               }
+               break;
+
+       case 0xfa:      /* CALLS (d16,PC) */
+               pc[2] = 4;
+               pc[3] = 0;
+               next = pc + 4;
+               break;
+
+       case 0xfc:      /* CALLS (d32,PC) */
+               pc[2] = 6;
+               pc[3] = 0;
+               pc[4] = 0;
+               pc[5] = 0;
+               next = pc + 6;
+               break;
+
+       case 0xd0 ... 0xda:     /* LXX (d8,PC) */
+       case 0xdb:              /* SETLB */
+               panic("Can't singlestep Lxx/SETLB\n");
+       }
+
+       return (unsigned) next;
+}
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+       return 0;
+}
+
+void __kprobes arch_copy_kprobe(struct kprobe *p)
+{
+       memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE);
+}
+
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+       *p->addr = BREAKPOINT_INSTRUCTION;
+       flush_icache_range((unsigned long) p->addr,
+                          (unsigned long) p->addr + sizeof(kprobe_opcode_t));
+}
+
+void __kprobes arch_disarm_kprobe(struct kprobe *p)
+{
+       mn10300_dcache_flush();
+       mn10300_icache_inv();
+}
+
+void arch_remove_kprobe(struct kprobe *p)
+{
+}
+
+static inline
+void __kprobes disarm_kprobe(struct kprobe *p, struct pt_regs *regs)
+{
+       *p->addr = p->opcode;
+       regs->pc = (unsigned long) p->addr;
+       mn10300_dcache_flush();
+       mn10300_icache_inv();
+}
+
+static inline
+void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
+{
+       unsigned long nextpc;
+
+       current_kprobe_orig_pc = regs->pc;
+       memcpy(current_kprobe_ss_buf, &p->ainsn.insn[0], MAX_INSN_SIZE);
+       regs->pc = (unsigned long) current_kprobe_ss_buf;
+
+       nextpc = find_nextpc(regs, &current_kprobe_ss_flags);
+       if (current_kprobe_ss_flags & SINGLESTEP_PCREL)
+               current_kprobe_next_pc =
+                       current_kprobe_orig_pc + (nextpc - regs->pc);
+       else
+               current_kprobe_next_pc = nextpc;
+
+       /* branching instructions need special handling */
+       if (current_kprobe_ss_flags & SINGLESTEP_BRANCH)
+               nextpc = singlestep_branch_setup(regs);
+
+       current_kprobe_bp_addr = nextpc;
+
+       *(u8 *) nextpc = BREAKPOINT_INSTRUCTION;
+       mn10300_dcache_flush_range2((unsigned) current_kprobe_ss_buf,
+                                   sizeof(current_kprobe_ss_buf));
+       mn10300_icache_inv();
+}
+
+static inline int __kprobes kprobe_handler(struct pt_regs *regs)
+{
+       struct kprobe *p;
+       int ret = 0;
+       unsigned int *addr = (unsigned int *) regs->pc;
+
+       /* We're in an interrupt, but this is clear and BUG()-safe. */
+       preempt_disable();
+
+       /* Check we're not actually recursing */
+       if (kprobe_running()) {
+               /* We *are* holding lock here, so this is safe.
+                  Disarm the probe we just hit, and ignore it. */
+               p = get_kprobe(addr);
+               if (p) {
+                       disarm_kprobe(p, regs);
+                       ret = 1;
+               } else {
+                       p = current_kprobe;
+                       if (p->break_handler && p->break_handler(p, regs))
+                               goto ss_probe;
+               }
+               /* If it's not ours, can't be delete race, (we hold lock). */
+               goto no_kprobe;
+       }
+
+       p = get_kprobe(addr);
+       if (!p) {
+               if (*addr != BREAKPOINT_INSTRUCTION) {
+                       /* The breakpoint instruction was removed right after
+                        * we hit it.  Another cpu has removed either a
+                        * probepoint or a debugger breakpoint at this address.
+                        * In either case, no further handling of this
+                        * interrupt is appropriate.
+                        */
+                       ret = 1;
+               }
+               /* Not one of ours: let kernel handle it */
+               goto no_kprobe;
+       }
+
+       kprobe_status = KPROBE_HIT_ACTIVE;
+       current_kprobe = p;
+       if (p->pre_handler(p, regs)) {
+               /* handler has already set things up, so skip ss setup */
+               return 1;
+       }
+
+ss_probe:
+       prepare_singlestep(p, regs);
+       kprobe_status = KPROBE_HIT_SS;
+       return 1;
+
+no_kprobe:
+       preempt_enable_no_resched();
+       return ret;
+}
+
+/*
+ * Called after single-stepping.  p->addr is the address of the
+ * instruction whose first byte has been replaced by the "breakpoint"
+ * instruction.  To avoid the SMP problems that can occur when we
+ * temporarily put back the original opcode to single-step, we
+ * single-stepped a copy of the instruction.  The address of this
+ * copy is p->ainsn.insn.
+ */
+static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
+{
+       /* we may need to fixup regs/stack after singlestepping a call insn */
+       if (current_kprobe_ss_flags & SINGLESTEP_BRANCH) {
+               regs->pc = current_kprobe_orig_pc;
+               switch (p->ainsn.insn[0]) {
+               case 0xcd:      /* CALL (d16,PC) */
+                       *(unsigned *) regs->sp = regs->mdr = regs->pc + 5;
+                       break;
+               case 0xdd:      /* CALL (d32,PC) */
+                       /* fixup mdr and return address on stack */
+                       *(unsigned *) regs->sp = regs->mdr = regs->pc + 7;
+                       break;
+               case 0xf0:
+                       if (p->ainsn.insn[1] >= 0xf0 &&
+                           p->ainsn.insn[1] <= 0xf3) {
+                               /* CALLS (An) */
+                               /* fixup MDR and return address on stack */
+                               regs->mdr = regs->pc + 2;
+                               *(unsigned *) regs->sp = regs->mdr;
+                       }
+                       break;
+
+               case 0xfa:      /* CALLS (d16,PC) */
+                       /* fixup MDR and return address on stack */
+                       *(unsigned *) regs->sp = regs->mdr = regs->pc + 4;
+                       break;
+
+               case 0xfc:      /* CALLS (d32,PC) */
+                       /* fixup MDR and return address on stack */
+                       *(unsigned *) regs->sp = regs->mdr = regs->pc + 6;
+                       break;
+               }
+       }
+
+       regs->pc = current_kprobe_next_pc;
+       current_kprobe_bp_addr = 0;
+}
+
+static inline int __kprobes post_kprobe_handler(struct pt_regs *regs)
+{
+       if (!kprobe_running())
+               return 0;
+
+       if (current_kprobe->post_handler)
+               current_kprobe->post_handler(current_kprobe, regs, 0);
+
+       resume_execution(current_kprobe, regs);
+       reset_current_kprobe();
+       preempt_enable_no_resched();
+       return 1;
+}
+
+/* Interrupts disabled, kprobe_lock held. */
+static inline
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+{
+       if (current_kprobe->fault_handler &&
+           current_kprobe->fault_handler(current_kprobe, regs, trapnr))
+               return 1;
+
+       if (kprobe_status & KPROBE_HIT_SS) {
+               resume_execution(current_kprobe, regs);
+               reset_current_kprobe();
+               preempt_enable_no_resched();
+       }
+       return 0;
+}
+
+/*
+ * Wrapper routine to for handling exceptions.
+ */
+int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
+                                      unsigned long val, void *data)
+{
+       struct die_args *args = data;
+
+       switch (val) {
+       case DIE_BREAKPOINT:
+               if (current_kprobe_bp_addr != args->regs->pc) {
+                       if (kprobe_handler(args->regs))
+                               return NOTIFY_STOP;
+               } else {
+                       if (post_kprobe_handler(args->regs))
+                               return NOTIFY_STOP;
+               }
+               break;
+       case DIE_GPF:
+               if (kprobe_running() &&
+                   kprobe_fault_handler(args->regs, args->trapnr))
+                       return NOTIFY_STOP;
+               break;
+       default:
+               break;
+       }
+       return NOTIFY_DONE;
+}
+
+/* Jprobes support.  */
+static struct pt_regs jprobe_saved_regs;
+static struct pt_regs *jprobe_saved_regs_location;
+static kprobe_opcode_t jprobe_saved_stack[MAX_STACK_SIZE];
+
+int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+       struct jprobe *jp = container_of(p, struct jprobe, kp);
+
+       jprobe_saved_regs_location = regs;
+       memcpy(&jprobe_saved_regs, regs, sizeof(struct pt_regs));
+
+       /* Save a whole stack frame, this gets arguments
+        * pushed onto the stack after using up all the
+        * arg registers.
+        */
+       memcpy(&jprobe_saved_stack, regs + 1, sizeof(jprobe_saved_stack));
+
+       /* setup return addr to the jprobe handler routine */
+       regs->pc = (unsigned long) jp->entry;
+       return 1;
+}
+
+void __kprobes jprobe_return(void)
+{
+       void *orig_sp = jprobe_saved_regs_location + 1;
+
+       preempt_enable_no_resched();
+       asm volatile("          mov     %0,sp\n"
+                    ".globl    jprobe_return_bp_addr\n"
+                    "jprobe_return_bp_addr:\n\t"
+                    "          .byte   0xff\n"
+                    : : "d" (orig_sp));
+}
+
+extern void jprobe_return_bp_addr(void);
+
+int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
+{
+       u8 *addr = (u8 *) regs->pc;
+
+       if (addr == (u8 *) jprobe_return_bp_addr) {
+               if (jprobe_saved_regs_location != regs) {
+                       printk(KERN_ERR"JPROBE:"
+                              " Current regs (%p) does not match saved regs"
+                              " (%p).\n",
+                              regs, jprobe_saved_regs_location);
+                       BUG();
+               }
+
+               /* Restore old register state.
+                */
+               memcpy(regs, &jprobe_saved_regs, sizeof(struct pt_regs));
+
+               memcpy(regs + 1, &jprobe_saved_stack,
+                      sizeof(jprobe_saved_stack));
+               return 1;
+       }
+       return 0;
+}
+
+int __init arch_init_kprobes(void)
+{
+       return 0;
+}
diff --git a/arch/mn10300/kernel/kthread.S b/arch/mn10300/kernel/kthread.S
new file mode 100644 (file)
index 0000000..b5ae467
--- /dev/null
@@ -0,0 +1,31 @@
+/* MN10300 Kernel thread trampoline function
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+       .text
+
+###############################################################################
+#
+# kernel_thread_helper - trampoline for kernel_thread()
+#
+# On entry:
+#   A2 = address of function to call
+#   D2 = function argument
+#
+###############################################################################
+       .globl  kernel_thread_helper
+       .type   kernel_thread_helper,@function
+kernel_thread_helper:
+       mov     do_exit,d1
+       mov     d1,(sp)
+       mov     d1,mdr
+       mov     d2,d0
+       jmp     (a2)
+
+       .size   kernel_thread_helper,.-kernel_thread_helper
diff --git a/arch/mn10300/kernel/mn10300-debug.c b/arch/mn10300/kernel/mn10300-debug.c
new file mode 100644 (file)
index 0000000..bd81964
--- /dev/null
@@ -0,0 +1,58 @@
+/* Debugging stuff for the MN10300-based processors
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <asm/serial-regs.h>
+
+#undef MN10300_CONSOLE_ON_SERIO
+
+/*
+ * write a string directly through one of the serial ports on-board the MN10300
+ */
+#ifdef MN10300_CONSOLE_ON_SERIO
+void debug_to_serial_mnser(const char *p, int n)
+{
+       char ch;
+
+       for (; n > 0; n--) {
+               ch = *p++;
+
+#if MN10300_CONSOLE_ON_SERIO == 0
+               while (SC0STR & (SC01STR_TBF)) continue;
+               SC0TXB = ch;
+               while (SC0STR & (SC01STR_TBF)) continue;
+               if (ch == 0x0a) {
+                       SC0TXB = 0x0d;
+                       while (SC0STR & (SC01STR_TBF)) continue;
+               }
+
+#elif MN10300_CONSOLE_ON_SERIO == 1
+               while (SC1STR & (SC01STR_TBF)) continue;
+               SC1TXB = ch;
+               while (SC1STR & (SC01STR_TBF)) continue;
+               if (ch == 0x0a) {
+                       SC1TXB = 0x0d;
+                       while (SC1STR & (SC01STR_TBF)) continue;
+               }
+
+#elif MN10300_CONSOLE_ON_SERIO == 2
+               while (SC2STR & (SC2STR_TBF)) continue;
+               SC2TXB = ch;
+               while (SC2STR & (SC2STR_TBF)) continue;
+               if (ch == 0x0a) {
+                       SC2TXB = 0x0d;
+                       while (SC2STR & (SC2STR_TBF)) continue;
+               }
+
+#endif
+       }
+}
+#endif
+
diff --git a/arch/mn10300/kernel/mn10300-serial-low.S b/arch/mn10300/kernel/mn10300-serial-low.S
new file mode 100644 (file)
index 0000000..ef3f4c1
--- /dev/null
@@ -0,0 +1,191 @@
+###############################################################################
+#
+# Virtual DMA driver for MN10300 serial ports
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/page.h>
+#include <asm/smp.h>
+#include <asm/cpu-regs.h>
+#include <asm/frame.inc>
+#include <asm/timer-regs.h>
+#include <asm/proc/cache.h>
+#include <asm/unit/timex.h>
+#include "mn10300-serial.h"
+
+#define        SCxCTR  0x00
+#define        SCxICR  0x04
+#define        SCxTXB  0x08
+#define        SCxRXB  0x09
+#define        SCxSTR  0x0c
+#define        SCxTIM  0x0d
+
+       .text
+
+###############################################################################
+#
+# serial port interrupt virtual DMA entry point
+# - intended to run at interrupt priority 1 (not affected by local_irq_disable)
+#
+###############################################################################
+       .balign L1_CACHE_BYTES
+ENTRY(mn10300_serial_vdma_interrupt)
+       or      EPSW_IE,psw                     # permit overriding by
+                                               # debugging interrupts
+       movm    [d2,d3,a2,a3,exreg0],(sp)
+
+       movhu   (IAGR),a2                       # see if which interrupt is
+                                               # pending
+       and     IAGR_GN,a2
+       add     a2,a2
+       add     mn10300_serial_int_tbl,a2
+
+       mov     (a2+),a3
+       mov     (__iobase,a3),e2
+       mov     (a2),a2
+       jmp     (a2)
+
+###############################################################################
+#
+# serial port receive interrupt virtual DMA entry point
+# - intended to run at interrupt priority 1 (not affected by local_irq_disable)
+# - stores data/status byte pairs in the ring buffer
+# - induces a scheduler tick timer interrupt when done, which we then subvert
+# on entry:
+#      A3      struct mn10300_serial_port *
+#      E2      I/O port base
+#
+###############################################################################
+ENTRY(mn10300_serial_vdma_rx_handler)
+       mov     (__rx_icr,a3),e3
+       mov     GxICR_DETECT,d2
+       movbu   d2,(e3)                         # ACK the interrupt
+       movhu   (e3),d2                         # flush
+
+       mov     (__rx_inp,a3),d3
+       mov     d3,a2
+       add     2,d3
+       and     MNSC_BUFFER_SIZE-1,d3
+       mov     (__rx_outp,a3),d2
+       cmp     d3,d2
+       beq     mnsc_vdma_rx_overflow
+
+       mov     (__rx_buffer,a3),d2
+       add     d2,a2
+       movhu   (SCxSTR,e2),d2
+       movbu   d2,(1,a2)
+       movbu   (SCxRXB,e2),d2
+       movbu   d2,(a2)
+       mov     d3,(__rx_inp,a3)
+       bset    MNSCx_RX_AVAIL,(__intr_flags,a3)
+
+mnsc_vdma_rx_done:
+       mov     (__tm_icr,a3),a2
+       mov     GxICR_LEVEL_6|GxICR_ENABLE|GxICR_REQUEST|GxICR_DETECT,d2
+       movhu   d2,(a2)                         # request a slow interrupt
+       movhu   (a2),d2                         # flush
+
+       movm    (sp),[d2,d3,a2,a3,exreg0]
+       rti
+
+mnsc_vdma_rx_overflow:
+       bset    MNSCx_RX_OVERF,(__intr_flags,a3)
+       bra     mnsc_vdma_rx_done
+
+###############################################################################
+#
+# serial port transmit interrupt virtual DMA entry point
+# - intended to run at interrupt priority 1 (not affected by local_irq_disable)
+# - retrieves data bytes from the ring buffer and passes them to the serial port
+# - induces a scheduler tick timer interrupt when done, which we then subvert
+#      A3      struct mn10300_serial_port *
+#      E2      I/O port base
+#
+###############################################################################
+       .balign L1_CACHE_BYTES
+ENTRY(mn10300_serial_vdma_tx_handler)
+       mov     (__tx_icr,a3),e3
+       mov     GxICR_DETECT,d2
+       movbu   d2,(e3)                 # ACK the interrupt
+       movhu   (e3),d2                 # flush
+
+       btst    0x01,(__tx_break,a3)    # handle transmit break request
+       bne     mnsc_vdma_tx_break
+
+       movbu   (SCxSTR,e2),d2          # don't try and transmit a char if the
+                                       # buffer is not empty
+       btst    SC01STR_TBF,d2          # (may have tried to jumpstart)
+       bne     mnsc_vdma_tx_noint
+
+       movbu   (__tx_xchar,a3),d2      # handle hi-pri XON/XOFF
+       or      d2,d2
+       bne     mnsc_vdma_tx_xchar
+
+       mov     (__tx_info_buffer,a3),a2 # get the uart_info struct for Tx
+       mov     (__xmit_tail,a2),d3
+       mov     (__xmit_head,a2),d2
+       cmp     d3,d2
+       beq     mnsc_vdma_tx_empty
+
+       mov     (__xmit_buffer,a2),d2   # get a char from the buffer and
+                                       # transmit it
+       movbu   (d3,d2),d2
+       movbu   d2,(SCxTXB,e2)          # Tx
+
+       inc     d3                      # advance the buffer pointer
+       and     __UART_XMIT_SIZE-1,d3
+       mov     (__xmit_head,a2),d2
+       mov     d3,(__xmit_tail,a2)
+
+       sub     d3,d2                   # see if we've written everything
+       beq     mnsc_vdma_tx_empty
+
+       and     __UART_XMIT_SIZE-1,d2   # see if we just made a hole
+       cmp     __UART_XMIT_SIZE-2,d2
+       beq     mnsc_vdma_tx_made_hole
+
+mnsc_vdma_tx_done:
+       mov     (__tm_icr,a3),a2
+       mov     GxICR_LEVEL_6|GxICR_ENABLE|GxICR_REQUEST|GxICR_DETECT,d2
+       movhu   d2,(a2)                 # request a slow interrupt
+       movhu   (a2),d2                 # flush
+
+mnsc_vdma_tx_noint:
+       movm    (sp),[d2,d3,a2,a3,exreg0]
+       rti
+
+mnsc_vdma_tx_empty:
+       mov     +(GxICR_LEVEL_1|GxICR_DETECT),d2
+       movhu   d2,(e3)                 # disable the interrupt
+       movhu   (e3),d2                 # flush
+
+       bset    MNSCx_TX_EMPTY,(__intr_flags,a3)
+       bra     mnsc_vdma_tx_done
+
+mnsc_vdma_tx_break:
+       movhu   (SCxCTR,e2),d2          # turn on break mode
+       or      SC01CTR_BKE,d2
+       movhu   d2,(SCxCTR,e2)
+       mov     +(GxICR_LEVEL_1|GxICR_DETECT),d2
+       movhu   d2,(e3)                 # disable transmit interrupts on this
+                                       # channel
+       movhu   (e3),d2                 # flush
+       bra     mnsc_vdma_tx_noint
+
+mnsc_vdma_tx_xchar:
+       bclr    0xff,(__tx_xchar,a3)
+       movbu   d2,(SCxTXB,e2)
+       bra     mnsc_vdma_tx_done
+
+mnsc_vdma_tx_made_hole:
+       bset    MNSCx_TX_SPACE,(__intr_flags,a3)
+       bra     mnsc_vdma_tx_done
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
new file mode 100644 (file)
index 0000000..b9c268c
--- /dev/null
@@ -0,0 +1,1480 @@
+/* MN10300 On-chip serial port UART driver
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+static const char serial_name[] = "MN10300 Serial driver";
+static const char serial_version[] = "mn10300_serial-1.0";
+static const char serial_revdate[] = "2007-11-06";
+
+#if defined(CONFIG_MN10300_TTYSM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/circ_buf.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/bitops.h>
+#include <asm/serial-regs.h>
+#include <asm/unit/timex.h>
+#include "mn10300-serial.h"
+
+static inline __attribute__((format(printf, 1, 2)))
+void no_printk(const char *fmt, ...)
+{
+}
+
+#define kenter(FMT, ...) \
+       printk(KERN_DEBUG "-->%s(" FMT ")\n", __func__, ##__VA_ARGS__)
+#define _enter(FMT, ...) \
+       no_printk(KERN_DEBUG "-->%s(" FMT ")\n", __func__, ##__VA_ARGS__)
+#define kdebug(FMT, ...) \
+       printk(KERN_DEBUG "--- " FMT "\n", ##__VA_ARGS__)
+#define _debug(FMT, ...) \
+       no_printk(KERN_DEBUG "--- " FMT "\n", ##__VA_ARGS__)
+#define kproto(FMT, ...) \
+       printk(KERN_DEBUG "### MNSERIAL " FMT " ###\n", ##__VA_ARGS__)
+#define _proto(FMT, ...) \
+       no_printk(KERN_DEBUG "### MNSERIAL " FMT " ###\n", ##__VA_ARGS__)
+
+#define NR_UARTS 3
+
+#ifdef CONFIG_MN10300_TTYSM_CONSOLE
+static void mn10300_serial_console_write(struct console *co,
+                                          const char *s, unsigned count);
+static int __init mn10300_serial_console_setup(struct console *co,
+                                                char *options);
+
+static struct uart_driver mn10300_serial_driver;
+static struct console mn10300_serial_console = {
+       .name           = "ttySM",
+       .write          = mn10300_serial_console_write,
+       .device         = uart_console_device,
+       .setup          = mn10300_serial_console_setup,
+       .flags          = CON_PRINTBUFFER,
+       .index          = -1,
+       .data           = &mn10300_serial_driver,
+};
+#endif
+
+static struct uart_driver mn10300_serial_driver = {
+       .owner          = NULL,
+       .driver_name    = "mn10300-serial",
+       .dev_name       = "ttySM",
+       .major          = TTY_MAJOR,
+       .minor          = 128,
+       .nr             = NR_UARTS,
+#ifdef CONFIG_MN10300_TTYSM_CONSOLE
+       .cons           = &mn10300_serial_console,
+#endif
+};
+
+static unsigned int mn10300_serial_tx_empty(struct uart_port *);
+static void mn10300_serial_set_mctrl(struct uart_port *, unsigned int mctrl);
+static unsigned int mn10300_serial_get_mctrl(struct uart_port *);
+static void mn10300_serial_stop_tx(struct uart_port *);
+static void mn10300_serial_start_tx(struct uart_port *);
+static void mn10300_serial_send_xchar(struct uart_port *, char ch);
+static void mn10300_serial_stop_rx(struct uart_port *);
+static void mn10300_serial_enable_ms(struct uart_port *);
+static void mn10300_serial_break_ctl(struct uart_port *, int ctl);
+static int mn10300_serial_startup(struct uart_port *);
+static void mn10300_serial_shutdown(struct uart_port *);
+static void mn10300_serial_set_termios(struct uart_port *,
+                                        struct ktermios *new,
+                                        struct ktermios *old);
+static const char *mn10300_serial_type(struct uart_port *);
+static void mn10300_serial_release_port(struct uart_port *);
+static int mn10300_serial_request_port(struct uart_port *);
+static void mn10300_serial_config_port(struct uart_port *, int);
+static int mn10300_serial_verify_port(struct uart_port *,
+                                       struct serial_struct *);
+
+static const struct uart_ops mn10300_serial_ops = {
+       .tx_empty       = mn10300_serial_tx_empty,
+       .set_mctrl      = mn10300_serial_set_mctrl,
+       .get_mctrl      = mn10300_serial_get_mctrl,
+       .stop_tx        = mn10300_serial_stop_tx,
+       .start_tx       = mn10300_serial_start_tx,
+       .send_xchar     = mn10300_serial_send_xchar,
+       .stop_rx        = mn10300_serial_stop_rx,
+       .enable_ms      = mn10300_serial_enable_ms,
+       .break_ctl      = mn10300_serial_break_ctl,
+       .startup        = mn10300_serial_startup,
+       .shutdown       = mn10300_serial_shutdown,
+       .set_termios    = mn10300_serial_set_termios,
+       .type           = mn10300_serial_type,
+       .release_port   = mn10300_serial_release_port,
+       .request_port   = mn10300_serial_request_port,
+       .config_port    = mn10300_serial_config_port,
+       .verify_port    = mn10300_serial_verify_port,
+};
+
+static irqreturn_t mn10300_serial_interrupt(int irq, void *dev_id);
+
+/*
+ * the first on-chip serial port: ttySM0 (aka SIF0)
+ */
+#ifdef CONFIG_MN10300_TTYSM0
+struct mn10300_serial_port mn10300_serial_port_sif0 = {
+       .uart.ops       = &mn10300_serial_ops,
+       .uart.membase   = (void __iomem *) &SC0CTR,
+       .uart.mapbase   = (unsigned long) &SC0CTR,
+       .uart.iotype    = UPIO_MEM,
+       .uart.irq       = 0,
+       .uart.uartclk   = 0, /* MN10300_IOCLK, */
+       .uart.fifosize  = 1,
+       .uart.flags     = UPF_BOOT_AUTOCONF,
+       .uart.line      = 0,
+       .uart.type      = PORT_MN10300,
+       .uart.lock      =
+       __SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif0.uart.lock),
+       .name           = "ttySM0",
+       ._iobase        = &SC0CTR,
+       ._control       = &SC0CTR,
+       ._status        = (volatile u8 *) &SC0STR,
+       ._intr          = &SC0ICR,
+       ._rxb           = &SC0RXB,
+       ._txb           = &SC0TXB,
+       .rx_name        = "ttySM0/Rx",
+       .tx_name        = "ttySM0/Tx",
+#ifdef CONFIG_MN10300_TTYSM0_TIMER8
+       .tm_name        = "ttySM0/Timer8",
+       ._tmxmd         = &TM8MD,
+       ._tmxbr         = &TM8BR,
+       ._tmicr         = &TM8ICR,
+       .tm_irq         = TM8IRQ,
+       .div_timer      = MNSCx_DIV_TIMER_16BIT,
+#else /* CONFIG_MN10300_TTYSM0_TIMER2 */
+       .tm_name        = "ttySM0/Timer2",
+       ._tmxmd         = &TM2MD,
+       ._tmxbr         = (volatile u16 *) &TM2BR,
+       ._tmicr         = &TM2ICR,
+       .tm_irq         = TM2IRQ,
+       .div_timer      = MNSCx_DIV_TIMER_8BIT,
+#endif
+       .rx_irq         = SC0RXIRQ,
+       .tx_irq         = SC0TXIRQ,
+       .rx_icr         = &GxICR(SC0RXIRQ),
+       .tx_icr         = &GxICR(SC0TXIRQ),
+       .clock_src      = MNSCx_CLOCK_SRC_IOCLK,
+       .options        = 0,
+#ifdef CONFIG_GDBSTUB_ON_TTYSM0
+       .gdbstub        = 1,
+#endif
+};
+#endif /* CONFIG_MN10300_TTYSM0 */
+
+/*
+ * the second on-chip serial port: ttySM1 (aka SIF1)
+ */
+#ifdef CONFIG_MN10300_TTYSM1
+struct mn10300_serial_port mn10300_serial_port_sif1 = {
+       .uart.ops       = &mn10300_serial_ops,
+       .uart.membase   = (void __iomem *) &SC1CTR,
+       .uart.mapbase   = (unsigned long) &SC1CTR,
+       .uart.iotype    = UPIO_MEM,
+       .uart.irq       = 0,
+       .uart.uartclk   = 0, /* MN10300_IOCLK, */
+       .uart.fifosize  = 1,
+       .uart.flags     = UPF_BOOT_AUTOCONF,
+       .uart.line      = 1,
+       .uart.type      = PORT_MN10300,
+       .uart.lock      =
+       __SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif1.uart.lock),
+       .name           = "ttySM1",
+       ._iobase        = &SC1CTR,
+       ._control       = &SC1CTR,
+       ._status        = (volatile u8 *) &SC1STR,
+       ._intr          = &SC1ICR,
+       ._rxb           = &SC1RXB,
+       ._txb           = &SC1TXB,
+       .rx_name        = "ttySM1/Rx",
+       .tx_name        = "ttySM1/Tx",
+#ifdef CONFIG_MN10300_TTYSM1_TIMER9
+       .tm_name        = "ttySM1/Timer9",
+       ._tmxmd         = &TM9MD,
+       ._tmxbr         = &TM9BR,
+       ._tmicr         = &TM9ICR,
+       .tm_irq         = TM9IRQ,
+       .div_timer      = MNSCx_DIV_TIMER_16BIT,
+#else /* CONFIG_MN10300_TTYSM1_TIMER3 */
+       .tm_name        = "ttySM1/Timer3",
+       ._tmxmd         = &TM3MD,
+       ._tmxbr         = (volatile u16 *) &TM3BR,
+       ._tmicr         = &TM3ICR,
+       .tm_irq         = TM3IRQ,
+       .div_timer      = MNSCx_DIV_TIMER_8BIT,
+#endif
+       .rx_irq         = SC1RXIRQ,
+       .tx_irq         = SC1TXIRQ,
+       .rx_icr         = &GxICR(SC1RXIRQ),
+       .tx_icr         = &GxICR(SC1TXIRQ),
+       .clock_src      = MNSCx_CLOCK_SRC_IOCLK,
+       .options        = 0,
+#ifdef CONFIG_GDBSTUB_ON_TTYSM1
+       .gdbstub        = 1,
+#endif
+};
+#endif /* CONFIG_MN10300_TTYSM1 */
+
+/*
+ * the third on-chip serial port: ttySM2 (aka SIF2)
+ */
+#ifdef CONFIG_MN10300_TTYSM2
+struct mn10300_serial_port mn10300_serial_port_sif2 = {
+       .uart.ops       = &mn10300_serial_ops,
+       .uart.membase   = (void __iomem *) &SC2CTR,
+       .uart.mapbase   = (unsigned long) &SC2CTR,
+       .uart.iotype    = UPIO_MEM,
+       .uart.irq       = 0,
+       .uart.uartclk   = 0, /* MN10300_IOCLK, */
+       .uart.fifosize  = 1,
+       .uart.flags     = UPF_BOOT_AUTOCONF,
+       .uart.line      = 2,
+#ifdef CONFIG_MN10300_TTYSM2_CTS
+       .uart.type      = PORT_MN10300_CTS,
+#else
+       .uart.type      = PORT_MN10300,
+#endif
+       .uart.lock      =
+       __SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif2.uart.lock),
+       .name           = "ttySM2",
+       .rx_name        = "ttySM2/Rx",
+       .tx_name        = "ttySM2/Tx",
+       .tm_name        = "ttySM2/Timer10",
+       ._iobase        = &SC2CTR,
+       ._control       = &SC2CTR,
+       ._status        = &SC2STR,
+       ._intr          = &SC2ICR,
+       ._rxb           = &SC2RXB,
+       ._txb           = &SC2TXB,
+       ._tmxmd         = &TM10MD,
+       ._tmxbr         = &TM10BR,
+       ._tmicr         = &TM10ICR,
+       .tm_irq         = TM10IRQ,
+       .div_timer      = MNSCx_DIV_TIMER_16BIT,
+       .rx_irq         = SC2RXIRQ,
+       .tx_irq         = SC2TXIRQ,
+       .rx_icr         = &GxICR(SC2RXIRQ),
+       .tx_icr         = &GxICR(SC2TXIRQ),
+       .clock_src      = MNSCx_CLOCK_SRC_IOCLK,
+#ifdef CONFIG_MN10300_TTYSM2_CTS
+       .options        = MNSCx_OPT_CTS,
+#else
+       .options        = 0,
+#endif
+#ifdef CONFIG_GDBSTUB_ON_TTYSM2
+       .gdbstub        = 1,
+#endif
+};
+#endif /* CONFIG_MN10300_TTYSM2 */
+
+
+/*
+ * list of available serial ports
+ */
+struct mn10300_serial_port *mn10300_serial_ports[NR_UARTS + 1] = {
+#ifdef CONFIG_MN10300_TTYSM0
+       [0]     = &mn10300_serial_port_sif0,
+#endif
+#ifdef CONFIG_MN10300_TTYSM1
+       [1]     = &mn10300_serial_port_sif1,
+#endif
+#ifdef CONFIG_MN10300_TTYSM2
+       [2]     = &mn10300_serial_port_sif2,
+#endif
+       [NR_UARTS] = NULL,
+};
+
+
+/*
+ * we abuse the serial ports' baud timers' interrupt lines to get the ability
+ * to deliver interrupts to userspace as we use the ports' interrupt lines to
+ * do virtual DMA on account of the ports having no hardware FIFOs
+ *
+ * we can generate an interrupt manually in the assembly stubs by writing to
+ * the enable and detect bits in the interrupt control register, so all we need
+ * to do here is disable the interrupt line
+ *
+ * note that we can't just leave the line enabled as the baud rate timer *also*
+ * generates interrupts
+ */
+static void mn10300_serial_mask_ack(unsigned int irq)
+{
+       u16 tmp;
+       GxICR(irq) = GxICR_LEVEL_6;
+       tmp = GxICR(irq); /* flush write buffer */
+}
+
+static void mn10300_serial_nop(unsigned int irq)
+{
+}
+
+static struct irq_chip mn10300_serial_pic = {
+       .name           = "mnserial",
+       .ack            = mn10300_serial_mask_ack,
+       .mask           = mn10300_serial_mask_ack,
+       .mask_ack       = mn10300_serial_mask_ack,
+       .unmask         = mn10300_serial_nop,
+       .end            = mn10300_serial_nop,
+};
+
+
+/*
+ * serial virtual DMA interrupt jump table
+ */
+struct mn10300_serial_int mn10300_serial_int_tbl[NR_IRQS];
+
+static void mn10300_serial_dis_tx_intr(struct mn10300_serial_port *port)
+{
+       u16 x;
+       *port->tx_icr = GxICR_LEVEL_1 | GxICR_DETECT;
+       x = *port->tx_icr;
+}
+
+static void mn10300_serial_en_tx_intr(struct mn10300_serial_port *port)
+{
+       u16 x;
+       *port->tx_icr = GxICR_LEVEL_1 | GxICR_ENABLE;
+       x = *port->tx_icr;
+}
+
+static void mn10300_serial_dis_rx_intr(struct mn10300_serial_port *port)
+{
+       u16 x;
+       *port->rx_icr = GxICR_LEVEL_1 | GxICR_DETECT;
+       x = *port->rx_icr;
+}
+
+/*
+ * multi-bit equivalent of test_and_clear_bit()
+ */
+static int mask_test_and_clear(volatile u8 *ptr, u8 mask)
+{
+       u32 epsw;
+       asm volatile("  bclr    %1,(%2)         \n"
+                    "  mov     epsw,%0         \n"
+                    : "=d"(epsw) : "d"(mask), "a"(ptr));
+       return !(epsw & EPSW_FLAG_Z);
+}
+
+/*
+ * receive chars from the ring buffer for this serial port
+ * - must do break detection here (not done in the UART)
+ */
+static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port)
+{
+       struct uart_icount *icount = &port->uart.icount;
+       struct tty_struct *tty = port->uart.info->tty;
+       unsigned ix;
+       int count;
+       u8 st, ch, push, status, overrun;
+
+       _enter("%s", port->name);
+
+       push = 0;
+
+       count = CIRC_CNT(port->rx_inp, port->rx_outp, MNSC_BUFFER_SIZE);
+       count = tty_buffer_request_room(tty, count);
+       if (count == 0) {
+               if (!tty->low_latency)
+                       tty_flip_buffer_push(tty);
+               return;
+       }
+
+try_again:
+       /* pull chars out of the hat */
+       ix = port->rx_outp;
+       if (ix == port->rx_inp) {
+               if (push && !tty->low_latency)
+                       tty_flip_buffer_push(tty);
+               return;
+       }
+
+       ch = port->rx_buffer[ix++];
+       st = port->rx_buffer[ix++];
+       smp_rmb();
+       port->rx_outp = ix & (MNSC_BUFFER_SIZE - 1);
+       port->uart.icount.rx++;
+
+       st &= SC01STR_FEF | SC01STR_PEF | SC01STR_OEF;
+       status = 0;
+       overrun = 0;
+
+       /* the UART doesn't detect BREAK, so we have to do that ourselves
+        * - it starts as a framing error on a NUL character
+        * - then we count another two NUL characters before issuing TTY_BREAK
+        * - then we end on a normal char or one that has all the bottom bits
+        *   zero and the top bits set
+        */
+       switch (port->rx_brk) {
+       case 0:
+               /* not breaking at the moment */
+               break;
+
+       case 1:
+               if (st & SC01STR_FEF && ch == 0) {
+                       port->rx_brk = 2;
+                       goto try_again;
+               }
+               goto not_break;
+
+       case 2:
+               if (st & SC01STR_FEF && ch == 0) {
+                       port->rx_brk = 3;
+                       _proto("Rx Break Detected");
+                       icount->brk++;
+                       if (uart_handle_break(&port->uart))
+                               goto ignore_char;
+                       status |= 1 << TTY_BREAK;
+                       goto insert;
+               }
+               goto not_break;
+
+       default:
+               if (st & (SC01STR_FEF | SC01STR_PEF | SC01STR_OEF))
+                       goto try_again; /* still breaking */
+
+               port->rx_brk = 0; /* end of the break */
+
+               switch (ch) {
+               case 0xFF:
+               case 0xFE:
+               case 0xFC:
+               case 0xF8:
+               case 0xF0:
+               case 0xE0:
+               case 0xC0:
+               case 0x80:
+               case 0x00:
+                       /* discard char at probable break end */
+                       goto try_again;
+               }
+               break;
+       }
+
+process_errors:
+       /* handle framing error */
+       if (st & SC01STR_FEF) {
+               if (ch == 0) {
+                       /* framing error with NUL char is probably a BREAK */
+                       port->rx_brk = 1;
+                       goto try_again;
+               }
+
+               _proto("Rx Framing Error");
+               icount->frame++;
+               status |= 1 << TTY_FRAME;
+       }
+
+       /* handle parity error */
+       if (st & SC01STR_PEF) {
+               _proto("Rx Parity Error");
+               icount->parity++;
+               status = TTY_PARITY;
+       }
+
+       /* handle normal char */
+       if (status == 0) {
+               if (uart_handle_sysrq_char(&port->uart, ch))
+                       goto ignore_char;
+               status = (1 << TTY_NORMAL);
+       }
+
+       /* handle overrun error */
+       if (st & SC01STR_OEF) {
+               if (port->rx_brk)
+                       goto try_again;
+
+               _proto("Rx Overrun Error");
+               icount->overrun++;
+               overrun = 1;
+       }
+
+insert:
+       status &= port->uart.read_status_mask;
+
+       if (!overrun && !(status & port->uart.ignore_status_mask)) {
+               int flag;
+
+               if (status & (1 << TTY_BREAK))
+                       flag = TTY_BREAK;
+               else if (status & (1 << TTY_PARITY))
+                       flag = TTY_PARITY;
+               else if (status & (1 << TTY_FRAME))
+                       flag = TTY_FRAME;
+               else
+                       flag = TTY_NORMAL;
+
+               tty_insert_flip_char(tty, ch, flag);
+       }
+
+       /* overrun is special, since it's reported immediately, and doesn't
+        * affect the current character
+        */
+       if (overrun)
+               tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+
+       count--;
+       if (count <= 0) {
+               if (!tty->low_latency)
+                       tty_flip_buffer_push(tty);
+               return;
+       }
+
+ignore_char:
+       push = 1;
+       goto try_again;
+
+not_break:
+       port->rx_brk = 0;
+       goto process_errors;
+}
+
+/*
+ * handle an interrupt from the serial transmission "virtual DMA" driver
+ * - note: the interrupt routine will disable its own interrupts when the Tx
+ *   buffer is empty
+ */
+static void mn10300_serial_transmit_interrupt(struct mn10300_serial_port *port)
+{
+       _enter("%s", port->name);
+
+       if (uart_tx_stopped(&port->uart) ||
+           uart_circ_empty(&port->uart.info->xmit))
+               mn10300_serial_dis_tx_intr(port);
+
+       if (uart_circ_chars_pending(&port->uart.info->xmit) < WAKEUP_CHARS)
+               uart_write_wakeup(&port->uart);
+}
+
+/*
+ * deal with a change in the status of the CTS line
+ */
+static void mn10300_serial_cts_changed(struct mn10300_serial_port *port, u8 st)
+{
+       u16 ctr;
+
+       port->tx_cts = st;
+       port->uart.icount.cts++;
+
+       /* flip the CTS state selector flag to interrupt when it changes
+        * back */
+       ctr = *port->_control;
+       ctr ^= SC2CTR_TWS;
+       *port->_control = ctr;
+
+       uart_handle_cts_change(&port->uart, st & SC2STR_CTS);
+       wake_up_interruptible(&port->uart.info->delta_msr_wait);
+}
+
+/*
+ * handle a virtual interrupt generated by the lower level "virtual DMA"
+ * routines (irq is the baud timer interrupt)
+ */
+static irqreturn_t mn10300_serial_interrupt(int irq, void *dev_id)
+{
+       struct mn10300_serial_port *port = dev_id;
+       u8 st;
+
+       spin_lock(&port->uart.lock);
+
+       if (port->intr_flags) {
+               _debug("INT %s: %x", port->name, port->intr_flags);
+
+               if (mask_test_and_clear(&port->intr_flags, MNSCx_RX_AVAIL))
+                       mn10300_serial_receive_interrupt(port);
+
+               if (mask_test_and_clear(&port->intr_flags,
+                                       MNSCx_TX_SPACE | MNSCx_TX_EMPTY))
+                       mn10300_serial_transmit_interrupt(port);
+       }
+
+       /* the only modem control line amongst the whole lot is CTS on
+        * serial port 2 */
+       if (port->type == PORT_MN10300_CTS) {
+               st = *port->_status;
+               if ((port->tx_cts ^ st) & SC2STR_CTS)
+                       mn10300_serial_cts_changed(port, st);
+       }
+
+       spin_unlock(&port->uart.lock);
+
+       return IRQ_HANDLED;
+}
+
+/*
+ * return indication of whether the hardware transmit buffer is empty
+ */
+static unsigned int mn10300_serial_tx_empty(struct uart_port *_port)
+{
+       struct mn10300_serial_port *port =
+               container_of(_port, struct mn10300_serial_port, uart);
+
+       _enter("%s", port->name);
+
+       return (*port->_status & (SC01STR_TXF | SC01STR_TBF)) ?
+               0 : TIOCSER_TEMT;
+}
+
+/*
+ * set the modem control lines (we don't have any)
+ */
+static void mn10300_serial_set_mctrl(struct uart_port *_port,
+                                    unsigned int mctrl)
+{
+       struct mn10300_serial_port *port =
+               container_of(_port, struct mn10300_serial_port, uart);
+
+       _enter("%s,%x", port->name, mctrl);
+}
+
+/*
+ * get the modem control line statuses
+ */
+static unsigned int mn10300_serial_get_mctrl(struct uart_port *_port)
+{
+       struct mn10300_serial_port *port =
+               container_of(_port, struct mn10300_serial_port, uart);
+
+       _enter("%s", port->name);
+
+       if (port->type == PORT_MN10300_CTS && !(*port->_status & SC2STR_CTS))
+               return TIOCM_CAR | TIOCM_DSR;
+
+       return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR;
+}
+
+/*
+ * stop transmitting characters
+ */
+static void mn10300_serial_stop_tx(struct uart_port *_port)
+{
+       struct mn10300_serial_port *port =
+               container_of(_port, struct mn10300_serial_port, uart);
+
+       _enter("%s", port->name);
+
+       /* disable the virtual DMA */
+       mn10300_serial_dis_tx_intr(port);
+}
+
+/*
+ * start transmitting characters
+ * - jump-start transmission if it has stalled
+ *   - enable the serial Tx interrupt (used by the virtual DMA controller)
+ *   - force an interrupt to happen if necessary
+ */
+static void mn10300_serial_start_tx(struct uart_port *_port)
+{
+       struct mn10300_serial_port *port =
+               container_of(_port, struct mn10300_serial_port, uart);
+
+       u16 x;
+
+       _enter("%s{%lu}",
+              port->name,
+              CIRC_CNT(&port->uart.info->xmit.head,
+                       &port->uart.info->xmit.tail,
+                       UART_XMIT_SIZE));
+
+       /* kick the virtual DMA controller */
+       x = *port->tx_icr;
+       x |= GxICR_ENABLE;
+
+       if (*port->_status & SC01STR_TBF)
+               x &= ~(GxICR_REQUEST | GxICR_DETECT);
+       else
+               x |= GxICR_REQUEST | GxICR_DETECT;
+
+       _debug("CTR=%04hx ICR=%02hx STR=%04x TMD=%02hx TBR=%04hx ICR=%04hx",
+              *port->_control, *port->_intr, *port->_status,
+              *port->_tmxmd, *port->_tmxbr, *port->tx_icr);
+
+       *port->tx_icr = x;
+       x = *port->tx_icr;
+}
+
+/*
+ * transmit a high-priority XON/XOFF character
+ */
+static void mn10300_serial_send_xchar(struct uart_port *_port, char ch)
+{
+       struct mn10300_serial_port *port =
+               container_of(_port, struct mn10300_serial_port, uart);
+
+       _enter("%s,%02x", port->name, ch);
+
+       if (likely(port->gdbstub)) {
+               port->tx_xchar = ch;
+               if (ch)
+                       mn10300_serial_en_tx_intr(port);
+       }
+}
+
+/*
+ * stop receiving characters
+ * - called whilst the port is being closed
+ */
+static void mn10300_serial_stop_rx(struct uart_port *_port)
+{
+       struct mn10300_serial_port *port =
+               container_of(_port, struct mn10300_serial_port, uart);
+
+       u16 ctr;
+
+       _enter("%s", port->name);
+
+       ctr = *port->_control;
+       ctr &= ~SC01CTR_RXE;
+       *port->_control = ctr;
+
+       mn10300_serial_dis_rx_intr(port);
+}
+
+/*
+ * enable modem status interrupts
+ */
+static void mn10300_serial_enable_ms(struct uart_port *_port)
+{
+       struct mn10300_serial_port *port =
+               container_of(_port, struct mn10300_serial_port, uart);
+
+       u16 ctr, cts;
+
+       _enter("%s", port->name);
+
+       if (port->type == PORT_MN10300_CTS) {
+               /* want to interrupt when CTS goes low if CTS is now high and
+                * vice versa
+                */
+               port->tx_cts = *port->_status;
+
+               cts = (port->tx_cts & SC2STR_CTS) ?
+                       SC2CTR_TWE : SC2CTR_TWE | SC2CTR_TWS;
+
+               ctr = *port->_control;
+               ctr &= ~SC2CTR_TWS;
+               ctr |= cts;
+               *port->_control = ctr;
+
+               mn10300_serial_en_tx_intr(port);
+       }
+}
+
+/*
+ * transmit or cease transmitting a break signal
+ */
+static void mn10300_serial_break_ctl(struct uart_port *_port, int ctl)
+{
+       struct mn10300_serial_port *port =
+               container_of(_port, struct mn10300_serial_port, uart);
+
+       _enter("%s,%d", port->name, ctl);
+
+       if (ctl) {
+               /* tell the virtual DMA handler to assert BREAK */
+               port->tx_break = 1;
+               mn10300_serial_en_tx_intr(port);
+       } else {
+               port->tx_break = 0;
+               *port->_control &= ~SC01CTR_BKE;
+               mn10300_serial_en_tx_intr(port);
+       }
+}
+
+/*
+ * grab the interrupts and enable the port for reception
+ */
+static int mn10300_serial_startup(struct uart_port *_port)
+{
+       struct mn10300_serial_port *port =
+               container_of(_port, struct mn10300_serial_port, uart);
+       struct mn10300_serial_int *pint;
+
+       _enter("%s{%d}", port->name, port->gdbstub);
+
+       if (unlikely(port->gdbstub))
+               return -EBUSY;
+
+       /* allocate an Rx buffer for the virtual DMA handler */
+       port->rx_buffer = kmalloc(MNSC_BUFFER_SIZE, GFP_KERNEL);
+       if (!port->rx_buffer)
+               return -ENOMEM;
+
+       port->rx_inp = port->rx_outp = 0;
+
+       /* finally, enable the device */
+       *port->_intr = SC01ICR_TI;
+       *port->_control |= SC01CTR_TXE | SC01CTR_RXE;
+
+       pint = &mn10300_serial_int_tbl[port->rx_irq];
+       pint->port = port;
+       pint->vdma = mn10300_serial_vdma_rx_handler;
+       pint = &mn10300_serial_int_tbl[port->tx_irq];
+       pint->port = port;
+       pint->vdma = mn10300_serial_vdma_tx_handler;
+
+       set_intr_level(port->rx_irq, GxICR_LEVEL_1);
+       set_intr_level(port->tx_irq, GxICR_LEVEL_1);
+       set_irq_chip(port->tm_irq, &mn10300_serial_pic);
+
+       if (request_irq(port->rx_irq, mn10300_serial_interrupt,
+                       IRQF_DISABLED, port->rx_name, port) < 0)
+               goto error;
+
+       if (request_irq(port->tx_irq, mn10300_serial_interrupt,
+                       IRQF_DISABLED, port->tx_name, port) < 0)
+               goto error2;
+
+       if (request_irq(port->tm_irq, mn10300_serial_interrupt,
+                       IRQF_DISABLED, port->tm_name, port) < 0)
+               goto error3;
+       mn10300_serial_mask_ack(port->tm_irq);
+
+       return 0;
+
+error3:
+       free_irq(port->tx_irq, port);
+error2:
+       free_irq(port->rx_irq, port);
+error:
+       kfree(port->rx_buffer);
+       port->rx_buffer = NULL;
+       return -EBUSY;
+}
+
+/*
+ * shutdown the port and release interrupts
+ */
+static void mn10300_serial_shutdown(struct uart_port *_port)
+{
+       struct mn10300_serial_port *port =
+               container_of(_port, struct mn10300_serial_port, uart);
+
+       _enter("%s", port->name);
+
+       /* disable the serial port and its baud rate timer */
+       port->tx_break = 0;
+       *port->_control &= ~(SC01CTR_TXE | SC01CTR_RXE | SC01CTR_BKE);
+       *port->_tmxmd = 0;
+
+       if (port->rx_buffer) {
+               void *buf = port->rx_buffer;
+               port->rx_buffer = NULL;
+               kfree(buf);
+       }
+
+       /* disable all intrs */
+       free_irq(port->tm_irq, port);
+       free_irq(port->rx_irq, port);
+       free_irq(port->tx_irq, port);
+
+       *port->rx_icr = GxICR_LEVEL_1;
+       *port->tx_icr = GxICR_LEVEL_1;
+}
+
+/*
+ * this routine is called to set the UART divisor registers to match the
+ * specified baud rate for a serial port.
+ */
+static void mn10300_serial_change_speed(struct mn10300_serial_port *port,
+                                         struct ktermios *new,
+                                         struct ktermios *old)
+{
+       unsigned long flags;
+       unsigned long ioclk = port->ioclk;
+       unsigned cflag;
+       int baud, bits, xdiv, tmp;
+       u16 tmxbr, scxctr;
+       u8 tmxmd, battempt;
+       u8 div_timer = port->div_timer;
+
+       _enter("%s{%lu}", port->name, ioclk);
+
+       /* byte size and parity */
+       cflag = new->c_cflag;
+       switch (cflag & CSIZE) {
+       case CS7: scxctr = SC01CTR_CLN_7BIT; bits = 9;  break;
+       case CS8: scxctr = SC01CTR_CLN_8BIT; bits = 10; break;
+       default:  scxctr = SC01CTR_CLN_8BIT; bits = 10; break;
+       }
+
+       if (cflag & CSTOPB) {
+               scxctr |= SC01CTR_STB_2BIT;
+               bits++;
+       }
+
+       if (cflag & PARENB) {
+               bits++;
+               if (cflag & PARODD)
+                       scxctr |= SC01CTR_PB_ODD;
+#ifdef CMSPAR
+               else if (cflag & CMSPAR)
+                       scxctr |= SC01CTR_PB_FIXED0;
+#endif
+               else
+                       scxctr |= SC01CTR_PB_EVEN;
+       }
+
+       /* Determine divisor based on baud rate */
+       battempt = 0;
+
+       if (div_timer == MNSCx_DIV_TIMER_16BIT)
+               scxctr |= SC0CTR_CK_TM8UFLOW_8; /* ( == SC1CTR_CK_TM9UFLOW_8
+                                                *   == SC2CTR_CK_TM10UFLOW) */
+       else if (div_timer == MNSCx_DIV_TIMER_8BIT)
+               scxctr |= SC0CTR_CK_TM2UFLOW_8;
+
+try_alternative:
+       baud = uart_get_baud_rate(&port->uart, new, old, 0,
+                                 port->ioclk / 8);
+
+       _debug("ALT %d [baud %d]", battempt, baud);
+
+       if (!baud)
+               baud = 9600;    /* B0 transition handled in rs_set_termios */
+       xdiv = 1;
+       if (baud == 134) {
+               baud = 269;     /* 134 is really 134.5 */
+               xdiv = 2;
+       }
+
+       if (baud == 38400 &&
+           (port->uart.flags & UPF_SPD_MASK) == UPF_SPD_CUST
+           ) {
+               _debug("CUSTOM %u", port->uart.custom_divisor);
+
+               if (div_timer == MNSCx_DIV_TIMER_16BIT) {
+                       if (port->uart.custom_divisor <= 65535) {
+                               tmxmd = TM8MD_SRC_IOCLK;
+                               tmxbr = port->uart.custom_divisor;
+                               port->uart.uartclk = ioclk;
+                               goto timer_okay;
+                       }
+                       if (port->uart.custom_divisor / 8 <= 65535) {
+                               tmxmd = TM8MD_SRC_IOCLK_8;
+                               tmxbr = port->uart.custom_divisor / 8;
+                               port->uart.custom_divisor = tmxbr * 8;
+                               port->uart.uartclk = ioclk / 8;
+                               goto timer_okay;
+                       }
+                       if (port->uart.custom_divisor / 32 <= 65535) {
+                               tmxmd = TM8MD_SRC_IOCLK_32;
+                               tmxbr = port->uart.custom_divisor / 32;
+                               port->uart.custom_divisor = tmxbr * 32;
+                               port->uart.uartclk = ioclk / 32;
+                               goto timer_okay;
+                       }
+
+               } else if (div_timer == MNSCx_DIV_TIMER_8BIT) {
+                       if (port->uart.custom_divisor <= 255) {
+                               tmxmd = TM2MD_SRC_IOCLK;
+                               tmxbr = port->uart.custom_divisor;
+                               port->uart.uartclk = ioclk;
+                               goto timer_okay;
+                       }
+                       if (port->uart.custom_divisor / 8 <= 255) {
+                               tmxmd = TM2MD_SRC_IOCLK_8;
+                               tmxbr = port->uart.custom_divisor / 8;
+                               port->uart.custom_divisor = tmxbr * 8;
+                               port->uart.uartclk = ioclk / 8;
+                               goto timer_okay;
+                       }
+                       if (port->uart.custom_divisor / 32 <= 255) {
+                               tmxmd = TM2MD_SRC_IOCLK_32;
+                               tmxbr = port->uart.custom_divisor / 32;
+                               port->uart.custom_divisor = tmxbr * 32;
+                               port->uart.uartclk = ioclk / 32;
+                               goto timer_okay;
+                       }
+               }
+       }
+
+       switch (div_timer) {
+       case MNSCx_DIV_TIMER_16BIT:
+               port->uart.uartclk = ioclk;
+               tmxmd = TM8MD_SRC_IOCLK;
+               tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1;
+               if (tmp > 0 && tmp <= 65535)
+                       goto timer_okay;
+
+               port->uart.uartclk = ioclk / 8;
+               tmxmd = TM8MD_SRC_IOCLK_8;
+               tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1;
+               if (tmp > 0 && tmp <= 65535)
+                       goto timer_okay;
+
+               port->uart.uartclk = ioclk / 32;
+               tmxmd = TM8MD_SRC_IOCLK_32;
+               tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1;
+               if (tmp > 0 && tmp <= 65535)
+                       goto timer_okay;
+               break;
+
+       case MNSCx_DIV_TIMER_8BIT:
+               port->uart.uartclk = ioclk;
+               tmxmd = TM2MD_SRC_IOCLK;
+               tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1;
+               if (tmp > 0 && tmp <= 255)
+                       goto timer_okay;
+
+               port->uart.uartclk = ioclk / 8;
+               tmxmd = TM2MD_SRC_IOCLK_8;
+               tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1;
+               if (tmp > 0 && tmp <= 255)
+                       goto timer_okay;
+
+               port->uart.uartclk = ioclk / 32;
+               tmxmd = TM2MD_SRC_IOCLK_32;
+               tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1;
+               if (tmp > 0 && tmp <= 255)
+                       goto timer_okay;
+               break;
+
+       default:
+               BUG();
+               return;
+       }
+
+       /* refuse to change to a baud rate we can't support */
+       _debug("CAN'T SUPPORT");
+
+       switch (battempt) {
+       case 0:
+               if (old) {
+                       new->c_cflag &= ~CBAUD;
+                       new->c_cflag |= (old->c_cflag & CBAUD);
+                       battempt = 1;
+                       goto try_alternative;
+               }
+
+       case 1:
+               /* as a last resort, if the quotient is zero, default to 9600
+                * bps */
+               new->c_cflag &= ~CBAUD;
+               new->c_cflag |= B9600;
+               battempt = 2;
+               goto try_alternative;
+
+       default:
+               /* hmmm... can't seem to support 9600 either
+                * - we could try iterating through the speeds we know about to
+                *   find the lowest
+                */
+               new->c_cflag &= ~CBAUD;
+               new->c_cflag |= B0;
+
+               if (div_timer == MNSCx_DIV_TIMER_16BIT)
+                       tmxmd = TM8MD_SRC_IOCLK_32;
+               else if (div_timer == MNSCx_DIV_TIMER_8BIT)
+                       tmxmd = TM2MD_SRC_IOCLK_32;
+               tmxbr = 1;
+
+               port->uart.uartclk = ioclk / 32;
+               break;
+       }
+timer_okay:
+
+       _debug("UARTCLK: %u / %hu", port->uart.uartclk, tmxbr);
+
+       /* make the changes */
+       spin_lock_irqsave(&port->uart.lock, flags);
+
+       uart_update_timeout(&port->uart, new->c_cflag, baud);
+
+       /* set the timer to produce the required baud rate */
+       switch (div_timer) {
+       case MNSCx_DIV_TIMER_16BIT:
+               *port->_tmxmd = 0;
+               *port->_tmxbr = tmxbr;
+               *port->_tmxmd = TM8MD_INIT_COUNTER;
+               *port->_tmxmd = tmxmd | TM8MD_COUNT_ENABLE;
+               break;
+
+       case MNSCx_DIV_TIMER_8BIT:
+               *port->_tmxmd = 0;
+               *(volatile u8 *) port->_tmxbr = (u8) tmxbr;
+               *port->_tmxmd = TM2MD_INIT_COUNTER;
+               *port->_tmxmd = tmxmd | TM2MD_COUNT_ENABLE;
+               break;
+       }
+
+       /* CTS flow control flag and modem status interrupts */
+       scxctr &= ~(SC2CTR_TWE | SC2CTR_TWS);
+
+       if (port->type == PORT_MN10300_CTS && cflag & CRTSCTS) {
+               /* want to interrupt when CTS goes low if CTS is now
+                * high and vice versa
+                */
+               port->tx_cts = *port->_status;
+
+               if (port->tx_cts & SC2STR_CTS)
+                       scxctr |= SC2CTR_TWE;
+               else
+                       scxctr |= SC2CTR_TWE | SC2CTR_TWS;
+       }
+
+       /* set up parity check flag */
+       port->uart.read_status_mask = (1 << TTY_NORMAL) | (1 << TTY_OVERRUN);
+       if (new->c_iflag & INPCK)
+               port->uart.read_status_mask |=
+                       (1 << TTY_PARITY) | (1 << TTY_FRAME);
+       if (new->c_iflag & (BRKINT | PARMRK))
+               port->uart.read_status_mask |= (1 << TTY_BREAK);
+
+       /* characters to ignore */
+       port->uart.ignore_status_mask = 0;
+       if (new->c_iflag & IGNPAR)
+               port->uart.ignore_status_mask |=
+                       (1 << TTY_PARITY) | (1 << TTY_FRAME);
+       if (new->c_iflag & IGNBRK) {
+               port->uart.ignore_status_mask |= (1 << TTY_BREAK);
+               /*
+                * If we're ignoring parity and break indicators,
+                * ignore overruns to (for real raw support).
+                */
+               if (new->c_iflag & IGNPAR)
+                       port->uart.ignore_status_mask |= (1 << TTY_OVERRUN);
+       }
+
+       /* Ignore all characters if CREAD is not set */
+       if ((new->c_cflag & CREAD) == 0)
+               port->uart.ignore_status_mask |= (1 << TTY_NORMAL);
+
+       scxctr |= *port->_control & (SC01CTR_TXE | SC01CTR_RXE | SC01CTR_BKE);
+       *port->_control = scxctr;
+
+       spin_unlock_irqrestore(&port->uart.lock, flags);
+}
+
+/*
+ * set the terminal I/O parameters
+ */
+static void mn10300_serial_set_termios(struct uart_port *_port,
+                                        struct ktermios *new,
+                                        struct ktermios *old)
+{
+       struct mn10300_serial_port *port =
+               container_of(_port, struct mn10300_serial_port, uart);
+
+       _enter("%s,%p,%p", port->name, new, old);
+
+       mn10300_serial_change_speed(port, new, old);
+
+       /* handle turning off CRTSCTS */
+       if (!(new->c_cflag & CRTSCTS)) {
+               u16 ctr = *port->_control;
+               ctr &= ~SC2CTR_TWE;
+               *port->_control = ctr;
+       }
+}
+
+/*
+ * return description of port type
+ */
+static const char *mn10300_serial_type(struct uart_port *_port)
+{
+       struct mn10300_serial_port *port =
+               container_of(_port, struct mn10300_serial_port, uart);
+
+       if (port->uart.type == PORT_MN10300_CTS)
+               return "MN10300 SIF_CTS";
+
+       return "MN10300 SIF";
+}
+
+/*
+ * release I/O and memory regions in use by port
+ */
+static void mn10300_serial_release_port(struct uart_port *_port)
+{
+       struct mn10300_serial_port *port =
+               container_of(_port, struct mn10300_serial_port, uart);
+
+       _enter("%s", port->name);
+
+       release_mem_region((unsigned long) port->_iobase, 16);
+}
+
+/*
+ * request I/O and memory regions for port
+ */
+static int mn10300_serial_request_port(struct uart_port *_port)
+{
+       struct mn10300_serial_port *port =
+               container_of(_port, struct mn10300_serial_port, uart);
+
+       _enter("%s", port->name);
+
+       request_mem_region((unsigned long) port->_iobase, 16, port->name);
+       return 0;
+}
+
+/*
+ * configure the type and reserve the ports
+ */
+static void mn10300_serial_config_port(struct uart_port *_port, int type)
+{
+       struct mn10300_serial_port *port =
+               container_of(_port, struct mn10300_serial_port, uart);
+
+       _enter("%s", port->name);
+
+       port->uart.type = PORT_MN10300;
+
+       if (port->options & MNSCx_OPT_CTS)
+               port->uart.type = PORT_MN10300_CTS;
+
+       mn10300_serial_request_port(_port);
+}
+
+/*
+ * verify serial parameters are suitable for this port type
+ */
+static int mn10300_serial_verify_port(struct uart_port *_port,
+                                       struct serial_struct *ss)
+{
+       struct mn10300_serial_port *port =
+               container_of(_port, struct mn10300_serial_port, uart);
+       void *mapbase = (void *) (unsigned long) port->uart.mapbase;
+
+       _enter("%s", port->name);
+
+       /* these things may not be changed */
+       if (ss->irq             != port->uart.irq       ||
+           ss->port            != port->uart.iobase    ||
+           ss->io_type         != port->uart.iotype    ||
+           ss->iomem_base      != mapbase ||
+           ss->iomem_reg_shift != port->uart.regshift  ||
+           ss->hub6            != port->uart.hub6      ||
+           ss->xmit_fifo_size  != port->uart.fifosize)
+               return -EINVAL;
+
+       /* type may be changed on a port that supports CTS */
+       if (ss->type != port->uart.type) {
+               if (!(port->options & MNSCx_OPT_CTS))
+                       return -EINVAL;
+
+               if (ss->type != PORT_MN10300 &&
+                   ss->type != PORT_MN10300_CTS)
+                       return -EINVAL;
+       }
+
+       return 0;
+}
+
+/*
+ * initialise the MN10300 on-chip UARTs
+ */
+static int __init mn10300_serial_init(void)
+{
+       struct mn10300_serial_port *port;
+       int ret, i;
+
+       printk(KERN_INFO "%s version %s (%s)\n",
+              serial_name, serial_version, serial_revdate);
+
+#ifdef CONFIG_MN10300_TTYSM2
+       SC2TIM = 8; /* make the baud base of timer 2 IOCLK/8 */
+#endif
+
+       set_intr_stub(EXCEP_IRQ_LEVEL1, mn10300_serial_vdma_interrupt);
+
+       ret = uart_register_driver(&mn10300_serial_driver);
+       if (!ret) {
+               for (i = 0 ; i < NR_PORTS ; i++) {
+                       port = mn10300_serial_ports[i];
+                       if (!port || port->gdbstub)
+                               continue;
+
+                       switch (port->clock_src) {
+                       case MNSCx_CLOCK_SRC_IOCLK:
+                               port->ioclk = MN10300_IOCLK;
+                               break;
+
+#ifdef MN10300_IOBCLK
+                       case MNSCx_CLOCK_SRC_IOBCLK:
+                               port->ioclk = MN10300_IOBCLK;
+                               break;
+#endif
+                       default:
+                               BUG();
+                       }
+
+                       ret = uart_add_one_port(&mn10300_serial_driver,
+                                               &port->uart);
+
+                       if (ret < 0) {
+                               _debug("ERROR %d", -ret);
+                               break;
+                       }
+               }
+
+               if (ret)
+                       uart_unregister_driver(&mn10300_serial_driver);
+       }
+
+       return ret;
+}
+
+__initcall(mn10300_serial_init);
+
+
+#ifdef CONFIG_MN10300_TTYSM_CONSOLE
+
+/*
+ * print a string to the serial port without disturbing the real user of the
+ * port too much
+ * - the console must be locked by the caller
+ */
+static void mn10300_serial_console_write(struct console *co,
+                                          const char *s, unsigned count)
+{
+       struct mn10300_serial_port *port;
+       unsigned i;
+       u16 scxctr, txicr, tmp;
+       u8 tmxmd;
+
+       port = mn10300_serial_ports[co->index];
+
+       /* firstly hijack the serial port from the "virtual DMA" controller */
+       txicr = *port->tx_icr;
+       *port->tx_icr = GxICR_LEVEL_1;
+       tmp = *port->tx_icr;
+
+       /* the transmitter may be disabled */
+       scxctr = *port->_control;
+       if (!(scxctr & SC01CTR_TXE)) {
+               /* restart the UART clock */
+               tmxmd = *port->_tmxmd;
+
+               switch (port->div_timer) {
+               case MNSCx_DIV_TIMER_16BIT:
+                       *port->_tmxmd = 0;
+                       *port->_tmxmd = TM8MD_INIT_COUNTER;
+                       *port->_tmxmd = tmxmd | TM8MD_COUNT_ENABLE;
+                       break;
+
+               case MNSCx_DIV_TIMER_8BIT:
+                       *port->_tmxmd = 0;
+                       *port->_tmxmd = TM2MD_INIT_COUNTER;
+                       *port->_tmxmd = tmxmd | TM2MD_COUNT_ENABLE;
+                       break;
+               }
+
+               /* enable the transmitter */
+               *port->_control = (scxctr & ~SC01CTR_BKE) | SC01CTR_TXE;
+
+       } else if (scxctr & SC01CTR_BKE) {
+               /* stop transmitting BREAK */
+               *port->_control = (scxctr & ~SC01CTR_BKE);
+       }
+
+       /* send the chars into the serial port (with LF -> LFCR conversion) */
+       for (i = 0; i < count; i++) {
+               char ch = *s++;
+
+               while (*port->_status & SC01STR_TBF)
+                       continue;
+               *(u8 *) port->_txb = ch;
+
+               if (ch == 0x0a) {
+                       while (*port->_status & SC01STR_TBF)
+                               continue;
+                       *(u8 *) port->_txb = 0xd;
+               }
+       }
+
+       /* can't let the transmitter be turned off if it's actually
+        * transmitting */
+       while (*port->_status & (SC01STR_TXF | SC01STR_TBF))
+               continue;
+
+       /* disable the transmitter if we re-enabled it */
+       if (!(scxctr & SC01CTR_TXE))
+               *port->_control = scxctr;
+
+       *port->tx_icr = txicr;
+       tmp = *port->tx_icr;
+}
+
+/*
+ * set up a serial port as a console
+ * - construct a cflag setting for the first rs_open()
+ * - initialize the serial port
+ * - return non-zero if we didn't find a serial port.
+ */
+static int __init mn10300_serial_console_setup(struct console *co,
+                                                char *options)
+{
+       struct mn10300_serial_port *port;
+       int i, parity = 'n', baud = 9600, bits = 8, flow = 0;
+
+       for (i = 0 ; i < NR_PORTS ; i++) {
+               port = mn10300_serial_ports[i];
+               if (port && !port->gdbstub && port->uart.line == co->index)
+                       goto found_device;
+       }
+
+       return -ENODEV;
+
+found_device:
+       switch (port->clock_src) {
+       case MNSCx_CLOCK_SRC_IOCLK:
+               port->ioclk = MN10300_IOCLK;
+               break;
+
+#ifdef MN10300_IOBCLK
+       case MNSCx_CLOCK_SRC_IOBCLK:
+               port->ioclk = MN10300_IOBCLK;
+               break;
+#endif
+       default:
+               BUG();
+       }
+
+       if (options)
+               uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+       return uart_set_options(&port->uart, co, baud, parity, bits, flow);
+}
+
+/*
+ * register console
+ */
+static int __init mn10300_serial_console_init(void)
+{
+       register_console(&mn10300_serial_console);
+       return 0;
+}
+
+console_initcall(mn10300_serial_console_init);
+#endif
diff --git a/arch/mn10300/kernel/mn10300-serial.h b/arch/mn10300/kernel/mn10300-serial.h
new file mode 100644 (file)
index 0000000..6796499
--- /dev/null
@@ -0,0 +1,126 @@
+/* MN10300 On-chip serial port driver definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _MN10300_SERIAL_H
+#define _MN10300_SERIAL_H
+
+#ifndef __ASSEMBLY__
+#include <linux/serial_core.h>
+#include <linux/termios.h>
+#endif
+
+#include <asm/page.h>
+#include <asm/serial-regs.h>
+
+#define NR_PORTS               3               /* should be set 3 or 9 or 16 */
+
+#define MNSC_BUFFER_SIZE       +(PAGE_SIZE / 2)
+
+/* intr_flags bits */
+#define MNSCx_RX_AVAIL         0x01
+#define MNSCx_RX_OVERF         0x02
+#define MNSCx_TX_SPACE         0x04
+#define MNSCx_TX_EMPTY         0x08
+
+#ifndef __ASSEMBLY__
+
+struct mn10300_serial_port {
+       char                    *rx_buffer;     /* reception buffer base */
+       unsigned                rx_inp;         /* pointer to rx input offset */
+       unsigned                rx_outp;        /* pointer to rx output offset */
+       u8                      tx_xchar;       /* high-priority XON/XOFF buffer */
+       u8                      tx_break;       /* transmit break request */
+       u8                      intr_flags;     /* interrupt flags */
+       volatile u16            *rx_icr;        /* Rx interrupt control register */
+       volatile u16            *tx_icr;        /* Tx interrupt control register */
+       int                     rx_irq;         /* reception IRQ */
+       int                     tx_irq;         /* transmission IRQ */
+       int                     tm_irq;         /* timer IRQ */
+
+       const char              *name;          /* name of serial port */
+       const char              *rx_name;       /* Rx interrupt handler name of serial port */
+       const char              *tx_name;       /* Tx interrupt handler name of serial port */
+       const char              *tm_name;       /* Timer interrupt handler name */
+       unsigned short          type;           /* type of serial port */
+       unsigned char           isconsole;      /* T if it's a console */
+       volatile void           *_iobase;       /* pointer to base of I/O control regs */
+       volatile u16            *_control;      /* control register pointer */
+       volatile u8             *_status;       /* status register pointer */
+       volatile u8             *_intr;         /* interrupt register pointer */
+       volatile void           *_rxb;          /* receive buffer register pointer */
+       volatile void           *_txb;          /* transmit buffer register pointer */
+       volatile u16            *_tmicr;        /* timer interrupt control register */
+       volatile u8             *_tmxmd;        /* baud rate timer mode register */
+       volatile u16            *_tmxbr;        /* baud rate timer base register */
+
+       /* this must come down here so that assembly can use BSET to access the
+        * above fields */
+       struct uart_port        uart;
+
+       unsigned short          rx_brk;         /* current break reception status */
+       u16                     tx_cts;         /* current CTS status */
+       int                     gdbstub;        /* preemptively stolen by GDB stub */
+
+       u8                      clock_src;      /* clock source */
+#define MNSCx_CLOCK_SRC_IOCLK  0
+#define MNSCx_CLOCK_SRC_IOBCLK 1
+
+       u8                      div_timer;      /* timer used as divisor */
+#define MNSCx_DIV_TIMER_16BIT  0
+#define MNSCx_DIV_TIMER_8BIT   1
+
+       u16                     options;        /* options */
+#define MNSCx_OPT_CTS          0x0001
+
+       unsigned long           ioclk;          /* base clock rate */
+};
+
+#ifdef CONFIG_MN10300_TTYSM0
+extern struct mn10300_serial_port mn10300_serial_port_sif0;
+#endif
+
+#ifdef CONFIG_MN10300_TTYSM1
+extern struct mn10300_serial_port mn10300_serial_port_sif1;
+#endif
+
+#ifdef CONFIG_MN10300_TTYSM2
+extern struct mn10300_serial_port mn10300_serial_port_sif2;
+#endif
+
+extern struct mn10300_serial_port *mn10300_serial_ports[];
+
+struct mn10300_serial_int {
+       struct mn10300_serial_port *port;
+       asmlinkage void (*vdma)(void);
+};
+
+extern struct mn10300_serial_int mn10300_serial_int_tbl[];
+
+extern asmlinkage void mn10300_serial_vdma_interrupt(void);
+extern asmlinkage void mn10300_serial_vdma_rx_handler(void);
+extern asmlinkage void mn10300_serial_vdma_tx_handler(void);
+
+#endif /* __ASSEMBLY__ */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYSM0)
+#define SCgSTR SC0STR
+#define SCgRXB SC0RXB
+#define SCgRXIRQ SC0RXIRQ
+#elif defined(CONFIG_GDBSTUB_ON_TTYSM1)
+#define SCgSTR SC1STR
+#define SCgRXB SC1RXB
+#define SCgRXIRQ SC1RXIRQ
+#elif defined(CONFIG_GDBSTUB_ON_TTYSM2)
+#define SCgSTR SC2STR
+#define SCgRXB SC2RXB
+#define SCgRXIRQ SC2RXIRQ
+#endif
+
+#endif /* _MN10300_SERIAL_H */
diff --git a/arch/mn10300/kernel/mn10300-watchdog-low.S b/arch/mn10300/kernel/mn10300-watchdog-low.S
new file mode 100644 (file)
index 0000000..9962447
--- /dev/null
@@ -0,0 +1,59 @@
+###############################################################################
+#
+# MN10300 Watchdog interrupt handler
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/intctl-regs.h>
+#include <asm/timer-regs.h>
+#include <asm/frame.inc>
+
+       .text
+
+###############################################################################
+#
+# Watchdog handler entry point
+# - special non-maskable interrupt
+#
+###############################################################################
+       .globl  watchdog_handler
+       .type   watchdog_handler,@function
+watchdog_handler:
+       add     -4,sp
+       SAVE_ALL
+
+       mov     0xffffffff,d0
+       mov     d0,(REG_ORIG_D0,fp)
+
+       mov     fp,d0
+       lsr     2,d1
+       call    watchdog_interrupt[],0          # watchdog_interrupt(regs,irq)
+
+       jmp     ret_from_intr
+
+       .size   watchdog_handler,.-watchdog_handler
+
+###############################################################################
+#
+# Watchdog touch entry point
+# - kept to absolute minimum (unfortunately, it's prototyped in linux/nmi.h so
+#   we can't inline it)
+#
+###############################################################################
+       .globl  touch_nmi_watchdog
+       .type   touch_nmi_watchdog,@function
+touch_nmi_watchdog:
+       clr     d0
+       mov     d0,(watchdog_alert_counter)
+       ret     [],0
+
+       .size   touch_nmi_watchdog,.-touch_nmi_watchdog
diff --git a/arch/mn10300/kernel/mn10300-watchdog.c b/arch/mn10300/kernel/mn10300-watchdog.c
new file mode 100644 (file)
index 0000000..10811e9
--- /dev/null
@@ -0,0 +1,183 @@
+/* MN10300 Watchdog timer
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/i386/kernel/nmi.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/nmi.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/intctl-regs.h>
+#include <asm/rtc-regs.h>
+#include <asm/div64.h>
+#include <asm/smp.h>
+#include <asm/gdb-stub.h>
+#include <asm/proc/clock.h>
+
+static DEFINE_SPINLOCK(watchdog_print_lock);
+static unsigned int watchdog;
+static unsigned int watchdog_hz = 1;
+unsigned int watchdog_alert_counter;
+
+EXPORT_SYMBOL(touch_nmi_watchdog);
+
+/*
+ * the best way to detect whether a CPU has a 'hard lockup' problem
+ * is to check its timer makes IRQ counts. If they are not
+ * changing then that CPU has some problem.
+ *
+ * as these watchdog NMI IRQs are generated on every CPU, we only
+ * have to check the current processor.
+ *
+ * since NMIs dont listen to _any_ locks, we have to be extremely
+ * careful not to rely on unsafe variables. The printk might lock
+ * up though, so we have to break up any console locks first ...
+ * [when there will be more tty-related locks, break them up
+ *  here too!]
+ */
+static unsigned int last_irq_sums[NR_CPUS];
+
+int __init check_watchdog(void)
+{
+       irq_cpustat_t tmp[1];
+
+       printk(KERN_INFO "Testing Watchdog... ");
+
+       memcpy(tmp, irq_stat, sizeof(tmp));
+       local_irq_enable();
+       mdelay((10 * 1000) / watchdog_hz); /* wait 10 ticks */
+       local_irq_disable();
+
+       if (nmi_count(0) - tmp[0].__nmi_count <= 5) {
+               printk(KERN_WARNING "CPU#%d: Watchdog appears to be stuck!\n",
+                      0);
+               return -1;
+       }
+
+       printk(KERN_INFO "OK.\n");
+
+       /* now that we know it works we can reduce NMI frequency to
+        * something more reasonable; makes a difference in some configs
+        */
+       watchdog_hz = 1;
+
+       return 0;
+}
+
+static int __init setup_watchdog(char *str)
+{
+       unsigned tmp;
+       int opt;
+       u8 ctr;
+
+       get_option(&str, &opt);
+       if (opt != 1)
+               return 0;
+
+       watchdog = opt;
+       if (watchdog) {
+               set_intr_stub(EXCEP_WDT, watchdog_handler);
+               ctr = WDCTR_WDCK_65536th;
+               WDCTR = WDCTR_WDRST | ctr;
+               WDCTR = ctr;
+               tmp = WDCTR;
+
+               tmp = __muldiv64u(1 << (16 + ctr * 2), 1000000, MN10300_WDCLK);
+               tmp = 1000000000 / tmp;
+               watchdog_hz = (tmp + 500) / 1000;
+       }
+
+       return 1;
+}
+
+__setup("watchdog=", setup_watchdog);
+
+void __init watchdog_go(void)
+{
+       u8 wdt;
+
+       if (watchdog) {
+               printk(KERN_INFO "Watchdog: running at %uHz\n", watchdog_hz);
+               wdt = WDCTR & ~WDCTR_WDCNE;
+               WDCTR = wdt | WDCTR_WDRST;
+               wdt = WDCTR;
+               WDCTR = wdt | WDCTR_WDCNE;
+               wdt = WDCTR;
+
+               check_watchdog();
+       }
+}
+
+asmlinkage
+void watchdog_interrupt(struct pt_regs *regs, enum exception_code excep)
+{
+
+       /*
+        * Since current-> is always on the stack, and we always switch
+        * the stack NMI-atomically, it's safe to use smp_processor_id().
+        */
+       int sum, cpu = smp_processor_id();
+       u8 wdt, tmp;
+
+       wdt = WDCTR & ~WDCTR_WDCNE;
+       WDCTR = wdt;
+       tmp = WDCTR;
+       NMICR = NMICR_WDIF;
+
+       nmi_count(cpu)++;
+       kstat_this_cpu.irqs[NMIIRQ]++;
+       sum = irq_stat[cpu].__irq_count;
+
+       if (last_irq_sums[cpu] == sum) {
+               /*
+                * Ayiee, looks like this CPU is stuck ...
+                * wait a few IRQs (5 seconds) before doing the oops ...
+                */
+               watchdog_alert_counter++;
+               if (watchdog_alert_counter == 5 * watchdog_hz) {
+                       spin_lock(&watchdog_print_lock);
+                       /*
+                        * We are in trouble anyway, lets at least try
+                        * to get a message out.
+                        */
+                       bust_spinlocks(1);
+                       printk(KERN_ERR
+                              "NMI Watchdog detected LOCKUP on CPU%d,"
+                              " pc %08lx, registers:\n",
+                              cpu, regs->pc);
+                       show_registers(regs);
+                       printk("console shuts up ...\n");
+                       console_silent();
+                       spin_unlock(&watchdog_print_lock);
+                       bust_spinlocks(0);
+#ifdef CONFIG_GDBSTUB
+                       if (gdbstub_busy)
+                               gdbstub_exception(regs, excep);
+                       else
+                               gdbstub_intercept(regs, excep);
+#endif
+                       do_exit(SIGSEGV);
+               }
+       } else {
+               last_irq_sums[cpu] = sum;
+               watchdog_alert_counter = 0;
+       }
+
+       WDCTR = wdt | WDCTR_WDRST;
+       tmp = WDCTR;
+       WDCTR = wdt | WDCTR_WDCNE;
+       tmp = WDCTR;
+}
diff --git a/arch/mn10300/kernel/mn10300_ksyms.c b/arch/mn10300/kernel/mn10300_ksyms.c
new file mode 100644 (file)
index 0000000..6d19628
--- /dev/null
@@ -0,0 +1,37 @@
+/* MN10300 Miscellaneous and library kernel exports
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <asm/uaccess.h>
+
+
+EXPORT_SYMBOL(change_bit);
+EXPORT_SYMBOL(test_and_change_bit);
+
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memmove);
+EXPORT_SYMBOL(memset);
+
+EXPORT_SYMBOL(strncpy_from_user);
+EXPORT_SYMBOL(__strncpy_from_user);
+EXPORT_SYMBOL(clear_user);
+EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(__generic_copy_from_user);
+EXPORT_SYMBOL(__generic_copy_to_user);
+EXPORT_SYMBOL(strnlen_user);
+
+extern u64 __ashrdi3(u64, unsigned);
+extern u64 __ashldi3(u64, unsigned);
+extern u64 __lshrdi3(u64, unsigned);
+extern s64 __negdi2(s64);
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__negdi2);
diff --git a/arch/mn10300/kernel/module.c b/arch/mn10300/kernel/module.c
new file mode 100644 (file)
index 0000000..0e4d2f6
--- /dev/null
@@ -0,0 +1,206 @@
+/* MN10300 Kernel module helper routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ * - Derived from arch/i386/kernel/module.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public Licence as published by
+ * the Free Software Foundation; either version 2 of the Licence, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public Licence for more details.
+ *
+ * You should have received a copy of the GNU General Public Licence
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+#if 0
+#define DEBUGP printk
+#else
+#define DEBUGP(fmt, ...)
+#endif
+
+/*
+ * allocate storage for a module
+ */
+void *module_alloc(unsigned long size)
+{
+       if (size == 0)
+               return NULL;
+       return vmalloc_exec(size);
+}
+
+/*
+ * free memory returned from module_alloc()
+ */
+void module_free(struct module *mod, void *module_region)
+{
+       vfree(module_region);
+       /* FIXME: If module_region == mod->init_region, trim exception
+        * table entries. */
+}
+
+/*
+ * allow the arch to fix up the section table
+ * - we don't need anything special
+ */
+int module_frob_arch_sections(Elf_Ehdr *hdr,
+                             Elf_Shdr *sechdrs,
+                             char *secstrings,
+                             struct module *mod)
+{
+       return 0;
+}
+
+static uint32_t reloc_get16(uint8_t *p)
+{
+       return p[0] | (p[1] << 8);
+}
+
+static uint32_t reloc_get24(uint8_t *p)
+{
+       return reloc_get16(p) | (p[2] << 16);
+}
+
+static uint32_t reloc_get32(uint8_t *p)
+{
+       return reloc_get16(p) | (reloc_get16(p+2) << 16);
+}
+
+static void reloc_put16(uint8_t *p, uint32_t val)
+{
+       p[0] = val & 0xff;
+       p[1] = (val >> 8) & 0xff;
+}
+
+static void reloc_put24(uint8_t *p, uint32_t val)
+{
+       reloc_put16(p, val);
+       p[2] = (val >> 16) & 0xff;
+}
+
+static void reloc_put32(uint8_t *p, uint32_t val)
+{
+       reloc_put16(p, val);
+       reloc_put16(p+2, val >> 16);
+}
+
+/*
+ * apply a REL relocation
+ */
+int apply_relocate(Elf32_Shdr *sechdrs,
+                  const char *strtab,
+                  unsigned int symindex,
+                  unsigned int relsec,
+                  struct module *me)
+{
+       printk(KERN_ERR "module %s: RELOCATION unsupported\n",
+              me->name);
+       return -ENOEXEC;
+}
+
+/*
+ * apply a RELA relocation
+ */
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+                      const char *strtab,
+                      unsigned int symindex,
+                      unsigned int relsec,
+                      struct module *me)
+{
+       unsigned int i;
+       Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
+       Elf32_Sym *sym;
+       Elf32_Addr relocation;
+       uint8_t *location;
+       uint32_t value;
+
+       DEBUGP("Applying relocate section %u to %u\n",
+              relsec, sechdrs[relsec].sh_info);
+
+       for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+               /* this is where to make the change */
+               location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+                       + rel[i].r_offset;
+
+               /* this is the symbol the relocation is referring to (note that
+                * all undefined symbols have been resolved by the caller) */
+               sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+                       + ELF32_R_SYM(rel[i].r_info);
+
+               /* this is the adjustment to be made */
+               relocation = sym->st_value + rel[i].r_addend;
+
+               switch (ELF32_R_TYPE(rel[i].r_info)) {
+                       /* for the first four relocation types, we add the
+                        * adjustment into the value at the location given */
+               case R_MN10300_32:
+                       value = reloc_get32(location);
+                       value += relocation;
+                       reloc_put32(location, value);
+                       break;
+               case R_MN10300_24:
+                       value = reloc_get24(location);
+                       value += relocation;
+                       reloc_put24(location, value);
+                       break;
+               case R_MN10300_16:
+                       value = reloc_get16(location);
+                       value += relocation;
+                       reloc_put16(location, value);
+                       break;
+               case R_MN10300_8:
+                       *location += relocation;
+                       break;
+
+                       /* for the next three relocation types, we write the
+                        * adjustment with the address subtracted over the
+                        * value at the location given */
+               case R_MN10300_PCREL32:
+                       value = relocation - (uint32_t) location;
+                       reloc_put32(location, value);
+                       break;
+               case R_MN10300_PCREL16:
+                       value = relocation - (uint32_t) location;
+                       reloc_put16(location, value);
+                       break;
+               case R_MN10300_PCREL8:
+                       *location = relocation - (uint32_t) location;
+                       break;
+
+               default:
+                       printk(KERN_ERR "module %s: Unknown relocation: %u\n",
+                              me->name, ELF32_R_TYPE(rel[i].r_info));
+                       return -ENOEXEC;
+               }
+       }
+       return 0;
+}
+
+/*
+ * finish loading the module
+ */
+int module_finalize(const Elf_Ehdr *hdr,
+                   const Elf_Shdr *sechdrs,
+                   struct module *me)
+{
+       return 0;
+}
+
+/*
+ * finish clearing the module
+ */
+void module_arch_cleanup(struct module *mod)
+{
+}
diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c
new file mode 100644 (file)
index 0000000..3b0d579
--- /dev/null
@@ -0,0 +1,297 @@
+/* MN10300  Process handling code
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <linux/percpu.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/mmu_context.h>
+#include <asm/fpu.h>
+#include <asm/reset-regs.h>
+#include <asm/gdb-stub.h>
+#include "internal.h"
+
+/*
+ * power management idle function, if any..
+ */
+void (*pm_idle)(void);
+EXPORT_SYMBOL(pm_idle);
+
+/*
+ * return saved PC of a blocked thread.
+ */
+unsigned long thread_saved_pc(struct task_struct *tsk)
+{
+       return ((unsigned long *) tsk->thread.sp)[3];
+}
+
+/*
+ * power off function, if any
+ */
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
+/*
+ * we use this if we don't have any better idle routine
+ */
+static void default_idle(void)
+{
+       local_irq_disable();
+       if (!need_resched())
+               safe_halt();
+       else
+               local_irq_enable();
+}
+
+/*
+ * the idle thread
+ * - there's no useful work to be done, so just try to conserve power and have
+ *   a low exit latency (ie sit in a loop waiting for somebody to say that
+ *   they'd like to reschedule)
+ */
+void cpu_idle(void)
+{
+       int cpu = smp_processor_id();
+
+       /* endless idle loop with no priority at all */
+       for (;;) {
+               while (!need_resched()) {
+                       void (*idle)(void);
+
+                       smp_rmb();
+                       idle = pm_idle;
+                       if (!idle)
+                               idle = default_idle;
+
+                       irq_stat[cpu].idle_timestamp = jiffies;
+                       idle();
+               }
+
+               preempt_enable_no_resched();
+               schedule();
+               preempt_disable();
+       }
+}
+
+void release_segments(struct mm_struct *mm)
+{
+}
+
+void machine_restart(char *cmd)
+{
+#ifdef CONFIG_GDBSTUB
+       gdbstub_exit(0);
+#endif
+
+#ifdef mn10300_unit_hard_reset
+       mn10300_unit_hard_reset();
+#else
+       mn10300_proc_hard_reset();
+#endif
+}
+
+void machine_halt(void)
+{
+#ifdef CONFIG_GDBSTUB
+       gdbstub_exit(0);
+#endif
+}
+
+void machine_power_off(void)
+{
+#ifdef CONFIG_GDBSTUB
+       gdbstub_exit(0);
+#endif
+}
+
+void show_regs(struct pt_regs *regs)
+{
+}
+
+/*
+ * create a kernel thread
+ */
+int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
+{
+       struct pt_regs regs;
+
+       memset(&regs, 0, sizeof(regs));
+
+       regs.a2 = (unsigned long) fn;
+       regs.d2 = (unsigned long) arg;
+       regs.pc = (unsigned long) kernel_thread_helper;
+       local_save_flags(regs.epsw);
+       regs.epsw |= EPSW_IE | EPSW_IM_7;
+
+       /* Ok, create the new process.. */
+       return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, &regs, 0,
+                      NULL, NULL);
+}
+
+/*
+ * free current thread data structures etc..
+ */
+void exit_thread(void)
+{
+       exit_fpu();
+}
+
+void flush_thread(void)
+{
+       flush_fpu();
+}
+
+void release_thread(struct task_struct *dead_task)
+{
+}
+
+/*
+ * we do not have to muck with descriptors here, that is
+ * done in switch_mm() as needed.
+ */
+void copy_segments(struct task_struct *p, struct mm_struct *new_mm)
+{
+}
+
+/*
+ * this gets called before we allocate a new thread and copy the current task
+ * into it so that we can store lazy state into memory
+ */
+void prepare_to_copy(struct task_struct *tsk)
+{
+       unlazy_fpu(tsk);
+}
+
+/*
+ * set up the kernel stack for a new thread and copy arch-specific thread
+ * control information
+ */
+int copy_thread(int nr, unsigned long clone_flags,
+               unsigned long c_usp, unsigned long ustk_size,
+               struct task_struct *p, struct pt_regs *kregs)
+{
+       struct pt_regs *c_uregs, *c_kregs, *uregs;
+       unsigned long c_ksp;
+
+       uregs = current->thread.uregs;
+
+       c_ksp = (unsigned long) task_stack_page(p) + THREAD_SIZE;
+
+       /* allocate the userspace exception frame and set it up */
+       c_ksp -= sizeof(struct pt_regs);
+       c_uregs = (struct pt_regs *) c_ksp;
+
+       p->thread.uregs = c_uregs;
+       *c_uregs = *uregs;
+       c_uregs->sp = c_usp;
+       c_uregs->epsw &= ~EPSW_FE; /* my FPU */
+
+       c_ksp -= 12; /* allocate function call ABI slack */
+
+       /* the new TLS pointer is passed in as arg #5 to sys_clone() */
+       if (clone_flags & CLONE_SETTLS)
+               c_uregs->e2 = __frame->d3;
+
+       /* set up the return kernel frame if called from kernel_thread() */
+       c_kregs = c_uregs;
+       if (kregs != uregs) {
+               c_ksp -= sizeof(struct pt_regs);
+               c_kregs = (struct pt_regs *) c_ksp;
+               *c_kregs = *kregs;
+               c_kregs->sp = c_usp;
+               c_kregs->next = c_uregs;
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+               c_kregs->e2 = (unsigned long) p; /* current */
+#endif
+
+               c_ksp -= 12; /* allocate function call ABI slack */
+       }
+
+       /* set up things up so the scheduler can start the new task */
+       p->thread.__frame = c_kregs;
+       p->thread.a3    = (unsigned long) c_kregs;
+       p->thread.sp    = c_ksp;
+       p->thread.pc    = (unsigned long) ret_from_fork;
+       p->thread.wchan = (unsigned long) ret_from_fork;
+       p->thread.usp   = c_usp;
+
+       return 0;
+}
+
+/*
+ * clone a process
+ * - tlsptr is retrieved by copy_thread() from __frame->d3
+ */
+asmlinkage long sys_clone(unsigned long clone_flags, unsigned long newsp,
+                         int __user *parent_tidptr, int __user *child_tidptr,
+                         int __user *tlsptr)
+{
+       return do_fork(clone_flags, newsp ?: __frame->sp, __frame, 0,
+                      parent_tidptr, child_tidptr);
+}
+
+asmlinkage long sys_fork(void)
+{
+       return do_fork(SIGCHLD, __frame->sp, __frame, 0, NULL, NULL);
+}
+
+asmlinkage long sys_vfork(void)
+{
+       return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, __frame->sp, __frame,
+                      0, NULL, NULL);
+}
+
+asmlinkage long sys_execve(char __user *name,
+                          char __user * __user *argv,
+                          char __user * __user *envp)
+{
+       char *filename;
+       int error;
+
+       lock_kernel();
+
+       filename = getname(name);
+       error = PTR_ERR(filename);
+       if (!IS_ERR(filename)) {
+               error = do_execve(filename, argv, envp, __frame);
+               if (error == 0)
+                       current->ptrace &= ~PT_DTRACE;
+
+               putname(filename);
+       }
+
+       unlock_kernel();
+       return error;
+}
+
+unsigned long get_wchan(struct task_struct *p)
+{
+       return p->thread.wchan;
+}
diff --git a/arch/mn10300/kernel/profile-low.S b/arch/mn10300/kernel/profile-low.S
new file mode 100644 (file)
index 0000000..94ffac1
--- /dev/null
@@ -0,0 +1,72 @@
+###############################################################################
+#
+# Fast profiling interrupt handler
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/smp.h>
+#include <asm/intctl-regs.h>
+#include <asm/timer-regs.h>
+
+#define pi break
+
+       .balign 4
+counter:
+       .long   -1
+
+###############################################################################
+#
+# Profiling interrupt entry point
+# - intended to run at interrupt priority 1
+#
+###############################################################################
+ENTRY(profile_handler)
+       movm    [d2,d3,a2],(sp)
+
+       # ignore userspace
+       mov     (12,sp),d2
+       and     EPSW_nSL,d2
+       bne     out
+
+       # do nothing if there's no buffer
+       mov     (prof_buffer),a2
+       and     a2,a2
+       beq     out
+       or      0x20000000,a2
+
+       # calculate relative position in text segment
+       mov     (16,sp),d2
+       sub     _stext,d2
+       mov     (prof_shift),d3
+       lsr     d3,d2
+       mov     (prof_len),d3
+       cmp     d3,d2
+       bcc     outside_text
+
+       # increment the appropriate profile bucket
+do_inc:
+       asl2    d2
+       mov     (a2,d2),d3
+       inc     d3
+       mov     d3,(a2,d2)
+out:
+       mov     GxICR_DETECT,d2
+       movbu   d2,(TM11ICR)            # ACK the interrupt
+       movbu   (TM11ICR),d2
+       movm    (sp),[d2,d3,a2]
+       rti
+
+outside_text:
+       sub     1,d3
+       mov     d3,d2
+       bra     do_inc
diff --git a/arch/mn10300/kernel/profile.c b/arch/mn10300/kernel/profile.c
new file mode 100644 (file)
index 0000000..20d7d03
--- /dev/null
@@ -0,0 +1,51 @@
+/* MN10300 Profiling setup
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+/*
+ * initialise the profiling if enabled
+ * - using with gdbstub will give anomalous results
+ * - can't be used with gdbstub if running at IRQ priority 0
+ */
+static __init int profile_init(void)
+{
+       u16 tmp;
+
+       if (!prof_buffer)
+               return 0;
+
+       /* use timer 11 to drive the profiling interrupts */
+       set_intr_stub(EXCEP_IRQ_LEVEL0, profile_handler);
+
+       /* set IRQ priority at which to run */
+       set_intr_level(TM11IRQ, GxICR_LEVEL_0);
+
+       /* set up timer 11
+        * - source: (IOCLK 33MHz)*2 = 66MHz
+        * - frequency: (33330000*2) / 8 / 20625 = 202Hz
+        */
+       TM11BR = 20625 - 1;
+       TM11MD = TM8MD_SRC_IOCLK_8;
+       TM11MD |= TM8MD_INIT_COUNTER;
+       TM11MD &= ~TM8MD_INIT_COUNTER;
+       TM11MD |= TM8MD_COUNT_ENABLE;
+
+       TM11ICR |= GxICR_ENABLE;
+       tmp = TM11ICR;
+
+       printk(KERN_INFO "Profiling initiated on timer 11, priority 0, %uHz\n",
+              mn10300_ioclk / 8 / (TM11BR + 1));
+       printk(KERN_INFO "Profile histogram stored %p-%p\n",
+              prof_buffer, (u8 *)(prof_buffer + prof_len) - 1);
+
+       return 0;
+}
+
+__initcall(profile_init);
diff --git a/arch/mn10300/kernel/ptrace.c b/arch/mn10300/kernel/ptrace.c
new file mode 100644 (file)
index 0000000..d6d6cdc
--- /dev/null
@@ -0,0 +1,379 @@
+/* MN10300 Process tracing
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/fpu.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * translate ptrace register IDs into struct pt_regs offsets
+ */
+static const u8 ptrace_regid_to_frame[] = {
+       [PT_A3 << 2]            = REG_A3,
+       [PT_A2 << 2]            = REG_A2,
+       [PT_D3 << 2]            = REG_D3,
+       [PT_D2 << 2]            = REG_D2,
+       [PT_MCVF << 2]          = REG_MCVF,
+       [PT_MCRL << 2]          = REG_MCRL,
+       [PT_MCRH << 2]          = REG_MCRH,
+       [PT_MDRQ << 2]          = REG_MDRQ,
+       [PT_E1 << 2]            = REG_E1,
+       [PT_E0 << 2]            = REG_E0,
+       [PT_E7 << 2]            = REG_E7,
+       [PT_E6 << 2]            = REG_E6,
+       [PT_E5 << 2]            = REG_E5,
+       [PT_E4 << 2]            = REG_E4,
+       [PT_E3 << 2]            = REG_E3,
+       [PT_E2 << 2]            = REG_E2,
+       [PT_SP << 2]            = REG_SP,
+       [PT_LAR << 2]           = REG_LAR,
+       [PT_LIR << 2]           = REG_LIR,
+       [PT_MDR << 2]           = REG_MDR,
+       [PT_A1 << 2]            = REG_A1,
+       [PT_A0 << 2]            = REG_A0,
+       [PT_D1 << 2]            = REG_D1,
+       [PT_D0 << 2]            = REG_D0,
+       [PT_ORIG_D0 << 2]       = REG_ORIG_D0,
+       [PT_EPSW << 2]          = REG_EPSW,
+       [PT_PC << 2]            = REG_PC,
+};
+
+static inline int get_stack_long(struct task_struct *task, int offset)
+{
+       return *(unsigned long *)
+               ((unsigned long) task->thread.uregs + offset);
+}
+
+/*
+ * this routine will put a word on the processes privileged stack.
+ * the offset is how far from the base addr as stored in the TSS.
+ * this routine assumes that all the privileged stacks are in our
+ * data space.
+ */
+static inline
+int put_stack_long(struct task_struct *task, int offset, unsigned long data)
+{
+       unsigned long stack;
+
+       stack = (unsigned long) task->thread.uregs + offset;
+       *(unsigned long *) stack = data;
+       return 0;
+}
+
+static inline unsigned long get_fpregs(struct fpu_state_struct *buf,
+                                      struct task_struct *tsk)
+{
+       return __copy_to_user(buf, &tsk->thread.fpu_state,
+                             sizeof(struct fpu_state_struct));
+}
+
+static inline unsigned long set_fpregs(struct task_struct *tsk,
+                                      struct fpu_state_struct *buf)
+{
+       return __copy_from_user(&tsk->thread.fpu_state, buf,
+                               sizeof(struct fpu_state_struct));
+}
+
+static inline void fpsave_init(struct task_struct *task)
+{
+       memset(&task->thread.fpu_state, 0, sizeof(struct fpu_state_struct));
+}
+
+/*
+ * make sure the single step bit is not set
+ */
+void ptrace_disable(struct task_struct *child)
+{
+#ifndef CONFIG_MN10300_USING_JTAG
+       struct user *dummy = NULL;
+       long tmp;
+
+       tmp = get_stack_long(child, (unsigned long) &dummy->regs.epsw);
+       tmp &= ~EPSW_T;
+       put_stack_long(child, (unsigned long) &dummy->regs.epsw, tmp);
+#endif
+}
+
+/*
+ * set the single step bit
+ */
+void ptrace_enable(struct task_struct *child)
+{
+#ifndef CONFIG_MN10300_USING_JTAG
+       struct user *dummy = NULL;
+       long tmp;
+
+       tmp = get_stack_long(child, (unsigned long) &dummy->regs.epsw);
+       tmp |= EPSW_T;
+       put_stack_long(child, (unsigned long) &dummy->regs.epsw, tmp);
+#endif
+}
+
+/*
+ * handle the arch-specific side of process tracing
+ */
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+{
+       struct fpu_state_struct fpu_state;
+       int i, ret;
+
+       switch (request) {
+       /* read the word at location addr. */
+       case PTRACE_PEEKTEXT: {
+               unsigned long tmp;
+               int copied;
+
+               copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+               ret = -EIO;
+               if (copied != sizeof(tmp))
+                       break;
+               ret = put_user(tmp, (unsigned long *) data);
+               break;
+       }
+
+       /* read the word at location addr. */
+       case PTRACE_PEEKDATA: {
+               unsigned long tmp;
+               int copied;
+
+               copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+               ret = -EIO;
+               if (copied != sizeof(tmp))
+                       break;
+               ret = put_user(tmp, (unsigned long *) data);
+               break;
+       }
+
+       /* read the word at location addr in the USER area. */
+       case PTRACE_PEEKUSR: {
+               unsigned long tmp;
+
+               ret = -EIO;
+               if ((addr & 3) || addr < 0 ||
+                   addr > sizeof(struct user) - 3)
+                       break;
+
+               tmp = 0;  /* Default return condition */
+               if (addr < NR_PTREGS << 2)
+                       tmp = get_stack_long(child,
+                                            ptrace_regid_to_frame[addr]);
+               ret = put_user(tmp, (unsigned long *) data);
+               break;
+       }
+
+       /* write the word at location addr. */
+       case PTRACE_POKETEXT:
+       case PTRACE_POKEDATA:
+               if (access_process_vm(child, addr, &data, sizeof(data), 1) ==
+                   sizeof(data))
+                       ret = 0;
+               else
+                       ret = -EIO;
+               break;
+
+               /* write the word at location addr in the USER area */
+       case PTRACE_POKEUSR:
+               ret = -EIO;
+               if ((addr & 3) || addr < 0 ||
+                   addr > sizeof(struct user) - 3)
+                       break;
+
+               ret = 0;
+               if (addr < NR_PTREGS << 2)
+                       ret = put_stack_long(child, ptrace_regid_to_frame[addr],
+                                            data);
+               break;
+
+               /* continue and stop at next (return from) syscall */
+       case PTRACE_SYSCALL:
+               /* restart after signal. */
+       case PTRACE_CONT:
+               ret = -EIO;
+               if ((unsigned long) data > _NSIG)
+                       break;
+               if (request == PTRACE_SYSCALL)
+                       set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+               else
+                       clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+               child->exit_code = data;
+               ptrace_disable(child);
+               wake_up_process(child);
+               ret = 0;
+               break;
+
+               /*
+                * make the child exit
+                * - the best I can do is send it a sigkill
+                * - perhaps it should be put in the status that it wants to
+                *   exit
+                */
+       case PTRACE_KILL:
+               ret = 0;
+               if (child->exit_state == EXIT_ZOMBIE)   /* already dead */
+                       break;
+               child->exit_code = SIGKILL;
+               clear_tsk_thread_flag(child, TIF_SINGLESTEP);
+               ptrace_disable(child);
+               wake_up_process(child);
+               break;
+
+       case PTRACE_SINGLESTEP: /* set the trap flag. */
+#ifndef CONFIG_MN10300_USING_JTAG
+               ret = -EIO;
+               if ((unsigned long) data > _NSIG)
+                       break;
+               clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+               ptrace_enable(child);
+               child->exit_code = data;
+               wake_up_process(child);
+               ret = 0;
+#else
+               ret = -EINVAL;
+#endif
+               break;
+
+       case PTRACE_DETACH:     /* detach a process that was attached. */
+               ret = ptrace_detach(child, data);
+               break;
+
+               /* Get all gp regs from the child. */
+       case PTRACE_GETREGS: {
+               unsigned long tmp;
+
+               if (!access_ok(VERIFY_WRITE, (unsigned *) data, NR_PTREGS << 2)) {
+                       ret = -EIO;
+                       break;
+               }
+
+               for (i = 0; i < NR_PTREGS << 2; i += 4) {
+                       tmp = get_stack_long(child, ptrace_regid_to_frame[i]);
+                       __put_user(tmp, (unsigned long *) data);
+                       data += sizeof(tmp);
+               }
+               ret = 0;
+               break;
+       }
+
+       case PTRACE_SETREGS: { /* Set all gp regs in the child. */
+               unsigned long tmp;
+
+               if (!access_ok(VERIFY_READ, (unsigned long *)data,
+                              sizeof(struct pt_regs))) {
+                       ret = -EIO;
+                       break;
+               }
+
+               for (i = 0; i < NR_PTREGS << 2; i += 4) {
+                       __get_user(tmp, (unsigned long *) data);
+                       put_stack_long(child, ptrace_regid_to_frame[i], tmp);
+                       data += sizeof(tmp);
+               }
+               ret = 0;
+               break;
+       }
+
+       case PTRACE_GETFPREGS: { /* Get the child FPU state. */
+               if (is_using_fpu(child)) {
+                       unlazy_fpu(child);
+                       fpu_state = child->thread.fpu_state;
+               } else {
+                       memset(&fpu_state, 0, sizeof(fpu_state));
+               }
+
+               ret = -EIO;
+               if (copy_to_user((void *) data, &fpu_state,
+                                sizeof(fpu_state)) == 0)
+                       ret = 0;
+               break;
+       }
+
+       case PTRACE_SETFPREGS: { /* Set the child FPU state. */
+               ret = -EFAULT;
+               if (copy_from_user(&fpu_state, (const void *) data,
+                                  sizeof(fpu_state)) == 0) {
+                       fpu_kill_state(child);
+                       child->thread.fpu_state = fpu_state;
+                       set_using_fpu(child);
+                       ret = 0;
+               }
+               break;
+       }
+
+       case PTRACE_SETOPTIONS: {
+               if (data & PTRACE_O_TRACESYSGOOD)
+                       child->ptrace |= PT_TRACESYSGOOD;
+               else
+                       child->ptrace &= ~PT_TRACESYSGOOD;
+               ret = 0;
+               break;
+       }
+
+       default:
+               ret = -EIO;
+               break;
+       }
+
+       return ret;
+}
+
+/*
+ * notification of system call entry/exit
+ * - triggered by current->work.syscall_trace
+ */
+asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
+{
+#if 0
+       /* just in case... */
+       printk(KERN_DEBUG "[%d] syscall_%lu(%lx,%lx,%lx,%lx) = %lx\n",
+              current->pid,
+              regs->orig_d0,
+              regs->a0,
+              regs->d1,
+              regs->a3,
+              regs->a2,
+              regs->d0);
+       return;
+#endif
+
+       if (!test_thread_flag(TIF_SYSCALL_TRACE) &&
+           !test_thread_flag(TIF_SINGLESTEP))
+               return;
+       if (!(current->ptrace & PT_PTRACED))
+               return;
+
+       /* the 0x80 provides a way for the tracing parent to distinguish
+          between a syscall stop and SIGTRAP delivery */
+       ptrace_notify(SIGTRAP |
+                     ((current->ptrace & PT_TRACESYSGOOD) &&
+                      !test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0));
+
+       /*
+        * this isn't the same as continuing with a signal, but it will do
+        * for normal use.  strace only continues with a signal if the
+        * stopping signal is not SIGTRAP.  -brl
+        */
+       if (current->exit_code) {
+               send_sig(current->exit_code, current, 1);
+               current->exit_code = 0;
+       }
+}
diff --git a/arch/mn10300/kernel/rtc.c b/arch/mn10300/kernel/rtc.c
new file mode 100644 (file)
index 0000000..042f792
--- /dev/null
@@ -0,0 +1,173 @@
+/* MN10300 RTC management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mc146818rtc.h>
+#include <linux/bcd.h>
+#include <linux/timex.h>
+#include <asm/rtc-regs.h>
+#include <asm/rtc.h>
+
+DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL(rtc_lock);
+
+/* last time the RTC got updated */
+static long last_rtc_update;
+
+/* time for RTC to update itself in ioclks */
+static unsigned long mn10300_rtc_update_period;
+
+/*
+ * read the current RTC time
+ */
+unsigned long __init get_initial_rtc_time(void)
+{
+       struct rtc_time tm;
+
+       get_rtc_time(&tm);
+
+       return mktime(tm.tm_year, tm.tm_mon, tm.tm_mday,
+                     tm.tm_hour, tm.tm_min, tm.tm_sec);
+}
+
+/*
+ * In order to set the CMOS clock precisely, set_rtc_mmss has to be called 500
+ * ms after the second nowtime has started, because when nowtime is written
+ * into the registers of the CMOS clock, it will jump to the next second
+ * precisely 500 ms later.  Check the Motorola MC146818A or Dallas DS12887 data
+ * sheet for details.
+ *
+ * BUG: This routine does not handle hour overflow properly; it just
+ *      sets the minutes. Usually you'll only notice that after reboot!
+ */
+static int set_rtc_mmss(unsigned long nowtime)
+{
+       unsigned char save_control, save_freq_select;
+       int retval = 0;
+       int real_seconds, real_minutes, cmos_minutes;
+
+       /* gets recalled with irq locally disabled */
+       spin_lock(&rtc_lock);
+       save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being
+                                               * set */
+       CMOS_WRITE(save_control | RTC_SET, RTC_CONTROL);
+
+       save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset
+                                                       * prescaler */
+       CMOS_WRITE(save_freq_select | RTC_DIV_RESET2, RTC_FREQ_SELECT);
+
+       cmos_minutes = CMOS_READ(RTC_MINUTES);
+       if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+               BCD_TO_BIN(cmos_minutes);
+
+       /*
+        * since we're only adjusting minutes and seconds,
+        * don't interfere with hour overflow. This avoids
+        * messing with unknown time zones but requires your
+        * RTC not to be off by more than 15 minutes
+        */
+       real_seconds = nowtime % 60;
+       real_minutes = nowtime / 60;
+       if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1)
+               /* correct for half hour time zone */
+               real_minutes += 30;
+       real_minutes %= 60;
+
+       if (abs(real_minutes - cmos_minutes) < 30) {
+               if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+                       BIN_TO_BCD(real_seconds);
+                       BIN_TO_BCD(real_minutes);
+               }
+               CMOS_WRITE(real_seconds, RTC_SECONDS);
+               CMOS_WRITE(real_minutes, RTC_MINUTES);
+       } else {
+               printk(KERN_WARNING
+                      "set_rtc_mmss: can't update from %d to %d\n",
+                      cmos_minutes, real_minutes);
+               retval = -1;
+       }
+
+       /* The following flags have to be released exactly in this order,
+        * otherwise the DS12887 (popular MC146818A clone with integrated
+        * battery and quartz) will not reset the oscillator and will not
+        * update precisely 500 ms later. You won't find this mentioned in
+        * the Dallas Semiconductor data sheets, but who believes data
+        * sheets anyway ...                           -- Markus Kuhn
+        */
+       CMOS_WRITE(save_control, RTC_CONTROL);
+       CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+       spin_unlock(&rtc_lock);
+
+       return retval;
+}
+
+void check_rtc_time(void)
+{
+       /* the RTC clock just finished ticking over again this second
+        * - if we have an externally synchronized Linux clock, then update
+        *   RTC clock accordingly every ~11 minutes. set_rtc_mmss() has to be
+        *   called as close as possible to 500 ms before the new second starts.
+        */
+       if ((time_status & STA_UNSYNC) == 0 &&
+           xtime.tv_sec > last_rtc_update + 660 &&
+           xtime.tv_nsec / 1000 >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
+           xtime.tv_nsec / 1000 <= 500000 + ((unsigned) TICK_SIZE) / 2
+           ) {
+               if (set_rtc_mmss(xtime.tv_sec) == 0)
+                       last_rtc_update = xtime.tv_sec;
+               else
+                       /* do it again in 60s */
+                       last_rtc_update = xtime.tv_sec - 600;
+       }
+}
+
+/*
+ * calibrate the TSC clock against the RTC
+ */
+void __init calibrate_clock(void)
+{
+       unsigned long count0, counth, count1;
+       unsigned char status;
+
+       /* make sure the RTC is running and is set to operate in 24hr mode */
+       status = RTSRC;
+       RTCRB |= RTCRB_SET;
+       RTCRB |= RTCRB_TM_24HR;
+       RTCRA |= RTCRA_DVR;
+       RTCRA &= ~RTCRA_DVR;
+       RTCRB &= ~RTCRB_SET;
+
+       /* work out the clock speed by counting clock cycles between ends of
+        * the RTC update cycle - track the RTC through one complete update
+        * cycle (1 second)
+        */
+       startup_timestamp_counter();
+
+       while (!(RTCRA & RTCRA_UIP)) {}
+       while ((RTCRA & RTCRA_UIP)) {}
+
+       count0 = TMTSCBC;
+
+       while (!(RTCRA & RTCRA_UIP)) {}
+
+       counth = TMTSCBC;
+
+       while ((RTCRA & RTCRA_UIP)) {}
+
+       count1 = TMTSCBC;
+
+       shutdown_timestamp_counter();
+
+       MN10300_TSCCLK = count0 - count1; /* the timers count down */
+       mn10300_rtc_update_period = counth - count1;
+       MN10300_TSC_PER_HZ = MN10300_TSCCLK / HZ;
+}
diff --git a/arch/mn10300/kernel/semaphore.c b/arch/mn10300/kernel/semaphore.c
new file mode 100644 (file)
index 0000000..9153c40
--- /dev/null
@@ -0,0 +1,149 @@
+/* MN10300 Semaphore implementation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <asm/semaphore.h>
+
+struct sem_waiter {
+       struct list_head        list;
+       struct task_struct      *task;
+};
+
+#if SEMAPHORE_DEBUG
+void semtrace(struct semaphore *sem, const char *str)
+{
+       if (sem->debug)
+               printk(KERN_DEBUG "[%d] %s({%d,%d})\n",
+                      current->pid,
+                      str,
+                      atomic_read(&sem->count),
+                      list_empty(&sem->wait_list) ? 0 : 1);
+}
+#else
+#define semtrace(SEM, STR) do { } while (0)
+#endif
+
+/*
+ * wait for a token to be granted from a semaphore
+ * - entered with lock held and interrupts disabled
+ */
+void __down(struct semaphore *sem, unsigned long flags)
+{
+       struct task_struct *tsk = current;
+       struct sem_waiter waiter;
+
+       semtrace(sem, "Entering __down");
+
+       /* set up my own style of waitqueue */
+       waiter.task = tsk;
+       get_task_struct(tsk);
+
+       list_add_tail(&waiter.list, &sem->wait_list);
+
+       /* we don't need to touch the semaphore struct anymore */
+       spin_unlock_irqrestore(&sem->wait_lock, flags);
+
+       /* wait to be given the semaphore */
+       set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+
+       for (;;) {
+               if (!waiter.task)
+                       break;
+               schedule();
+               set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+       }
+
+       tsk->state = TASK_RUNNING;
+       semtrace(sem, "Leaving __down");
+}
+EXPORT_SYMBOL(__down);
+
+/*
+ * interruptibly wait for a token to be granted from a semaphore
+ * - entered with lock held and interrupts disabled
+ */
+int __down_interruptible(struct semaphore *sem, unsigned long flags)
+{
+       struct task_struct *tsk = current;
+       struct sem_waiter waiter;
+       int ret;
+
+       semtrace(sem, "Entering __down_interruptible");
+
+       /* set up my own style of waitqueue */
+       waiter.task = tsk;
+       get_task_struct(tsk);
+
+       list_add_tail(&waiter.list, &sem->wait_list);
+
+       /* we don't need to touch the semaphore struct anymore */
+       set_task_state(tsk, TASK_INTERRUPTIBLE);
+
+       spin_unlock_irqrestore(&sem->wait_lock, flags);
+
+       /* wait to be given the semaphore */
+       ret = 0;
+       for (;;) {
+               if (!waiter.task)
+                       break;
+               if (unlikely(signal_pending(current)))
+                       goto interrupted;
+               schedule();
+               set_task_state(tsk, TASK_INTERRUPTIBLE);
+       }
+
+ out:
+       tsk->state = TASK_RUNNING;
+       semtrace(sem, "Leaving __down_interruptible");
+       return ret;
+
+ interrupted:
+       spin_lock_irqsave(&sem->wait_lock, flags);
+       list_del(&waiter.list);
+       spin_unlock_irqrestore(&sem->wait_lock, flags);
+
+       ret = 0;
+       if (!waiter.task) {
+               put_task_struct(current);
+               ret = -EINTR;
+       }
+       goto out;
+}
+EXPORT_SYMBOL(__down_interruptible);
+
+/*
+ * release a single token back to a semaphore
+ * - entered with lock held and interrupts disabled
+ */
+void __up(struct semaphore *sem)
+{
+       struct task_struct *tsk;
+       struct sem_waiter *waiter;
+
+       semtrace(sem, "Entering __up");
+
+       /* grant the token to the process at the front of the queue */
+       waiter = list_entry(sem->wait_list.next, struct sem_waiter, list);
+
+       /* We must be careful not to touch 'waiter' after we set ->task = NULL.
+        * It is an allocated on the waiter's stack and may become invalid at
+        * any time after that point (due to a wakeup from another source).
+        */
+       list_del_init(&waiter->list);
+       tsk = waiter->task;
+       smp_mb();
+       waiter->task = NULL;
+       wake_up_process(tsk);
+       put_task_struct(tsk);
+
+       semtrace(sem, "Leaving __up");
+}
+EXPORT_SYMBOL(__up);
diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c
new file mode 100644 (file)
index 0000000..6b7ce26
--- /dev/null
@@ -0,0 +1,298 @@
+/* MN10300 Arch-specific initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <asm/processor.h>
+#include <linux/console.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/proc/proc.h>
+#include <asm/busctl-regs.h>
+#include <asm/fpu.h>
+#include <asm/sections.h>
+
+struct mn10300_cpuinfo boot_cpu_data;
+
+/* For PCI or other memory-mapped resources */
+unsigned long pci_mem_start = 0x18000000;
+
+char redboot_command_line[COMMAND_LINE_SIZE] =
+       "console=ttyS0,115200 root=/dev/mtdblock3 rw";
+
+char __initdata redboot_platform_name[COMMAND_LINE_SIZE];
+
+static struct resource code_resource = {
+       .start  = 0x100000,
+       .end    = 0,
+       .name   = "Kernel code",
+};
+
+static struct resource data_resource = {
+       .start  = 0,
+       .end    = 0,
+       .name   = "Kernel data",
+};
+
+static unsigned long __initdata phys_memory_base;
+static unsigned long __initdata phys_memory_end;
+static unsigned long __initdata memory_end;
+unsigned long memory_size;
+
+struct thread_info *__current_ti = &init_thread_union.thread_info;
+struct task_struct *__current = &init_task;
+
+#define mn10300_known_cpus 3
+static const char *const mn10300_cputypes[] = {
+       "am33v1",
+       "am33v2",
+       "am34v1",
+       "unknown"
+};
+
+/*
+ *
+ */
+static void __init parse_mem_cmdline(char **cmdline_p)
+{
+       char *from, *to, c;
+
+       /* save unparsed command line copy for /proc/cmdline */
+       strcpy(boot_command_line, redboot_command_line);
+
+       /* see if there's an explicit memory size option */
+       from = redboot_command_line;
+       to = redboot_command_line;
+       c = ' ';
+
+       for (;;) {
+               if (c == ' ' && !memcmp(from, "mem=", 4)) {
+                       if (to != redboot_command_line)
+                               to--;
+                       memory_size = memparse(from + 4, &from);
+               }
+
+               c = *(from++);
+               if (!c)
+                       break;
+
+               *(to++) = c;
+       }
+
+       *to = '\0';
+       *cmdline_p = redboot_command_line;
+
+       if (memory_size == 0)
+               panic("Memory size not known\n");
+
+       memory_end = (unsigned long) CONFIG_KERNEL_RAM_BASE_ADDRESS +
+               memory_size;
+       if (memory_end > phys_memory_end)
+               memory_end = phys_memory_end;
+}
+
+/*
+ * architecture specific setup
+ */
+void __init setup_arch(char **cmdline_p)
+{
+       unsigned long bootmap_size;
+       unsigned long kstart_pfn, start_pfn, free_pfn, end_pfn;
+
+       cpu_init();
+       unit_setup();
+       parse_mem_cmdline(cmdline_p);
+
+       init_mm.start_code = (unsigned long)&_text;
+       init_mm.end_code = (unsigned long) &_etext;
+       init_mm.end_data = (unsigned long) &_edata;
+       init_mm.brk = (unsigned long) &_end;
+
+       code_resource.start = virt_to_bus(&_text);
+       code_resource.end = virt_to_bus(&_etext)-1;
+       data_resource.start = virt_to_bus(&_etext);
+       data_resource.end = virt_to_bus(&_edata)-1;
+
+#define PFN_UP(x)      (((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
+#define PFN_DOWN(x)    ((x) >> PAGE_SHIFT)
+#define PFN_PHYS(x)    ((x) << PAGE_SHIFT)
+
+       start_pfn = (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT);
+       kstart_pfn = PFN_UP(__pa(&_text));
+       free_pfn = PFN_UP(__pa(&_end));
+       end_pfn = PFN_DOWN(__pa(memory_end));
+
+       bootmap_size = init_bootmem_node(&contig_page_data,
+                                        free_pfn,
+                                        start_pfn,
+                                        end_pfn);
+
+       if (kstart_pfn > start_pfn)
+               free_bootmem(PFN_PHYS(start_pfn),
+                            PFN_PHYS(kstart_pfn - start_pfn));
+
+       free_bootmem(PFN_PHYS(free_pfn),
+                    PFN_PHYS(end_pfn - free_pfn));
+
+       /* If interrupt vector table is in main ram, then we need to
+          reserve the page it is occupying. */
+       if (CONFIG_INTERRUPT_VECTOR_BASE >= CONFIG_KERNEL_RAM_BASE_ADDRESS &&
+           CONFIG_INTERRUPT_VECTOR_BASE < memory_end)
+               reserve_bootmem(CONFIG_INTERRUPT_VECTOR_BASE, 1,
+                               BOOTMEM_DEFAULT);
+
+       reserve_bootmem(PAGE_ALIGN(PFN_PHYS(free_pfn)), bootmap_size,
+                       BOOTMEM_DEFAULT);
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+       conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+       conswitchp = &dummy_con;
+#endif
+#endif
+
+       paging_init();
+}
+
+/*
+ * perform CPU initialisation
+ */
+void __init cpu_init(void)
+{
+       unsigned long cpurev = CPUREV, type;
+       unsigned long base, size;
+
+       type = (CPUREV & CPUREV_TYPE) >> CPUREV_TYPE_S;
+       if (type > mn10300_known_cpus)
+               type = mn10300_known_cpus;
+
+       printk(KERN_INFO "Matsushita %s, rev %ld\n",
+              mn10300_cputypes[type],
+              (cpurev & CPUREV_REVISION) >> CPUREV_REVISION_S);
+
+       /* determine the memory size and base from the memory controller regs */
+       memory_size = 0;
+
+       base = SDBASE(0);
+       if (base & SDBASE_CE) {
+               size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT;
+               size = ~size + 1;
+               base &= SDBASE_CBA;
+
+               printk(KERN_INFO "SDRAM[0]: %luMb @%08lx\n", size >> 20, base);
+               memory_size += size;
+               phys_memory_base = base;
+       }
+
+       base = SDBASE(1);
+       if (base & SDBASE_CE) {
+               size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT;
+               size = ~size + 1;
+               base &= SDBASE_CBA;
+
+               printk(KERN_INFO "SDRAM[1]: %luMb @%08lx\n", size >> 20, base);
+               memory_size += size;
+               if (phys_memory_base == 0)
+                       phys_memory_base = base;
+       }
+
+       phys_memory_end = phys_memory_base + memory_size;
+
+#ifdef CONFIG_FPU
+       fpu_init_state();
+#endif
+}
+
+/*
+ * Get CPU information for use by the procfs.
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+       unsigned long cpurev = CPUREV, type, icachesz, dcachesz;
+
+       type = (CPUREV & CPUREV_TYPE) >> CPUREV_TYPE_S;
+       if (type > mn10300_known_cpus)
+               type = mn10300_known_cpus;
+
+       icachesz =
+               ((cpurev & CPUREV_ICWAY ) >> CPUREV_ICWAY_S)  *
+               ((cpurev & CPUREV_ICSIZE) >> CPUREV_ICSIZE_S) *
+               1024;
+
+       dcachesz =
+               ((cpurev & CPUREV_DCWAY ) >> CPUREV_DCWAY_S)  *
+               ((cpurev & CPUREV_DCSIZE) >> CPUREV_DCSIZE_S) *
+               1024;
+
+       seq_printf(m,
+                  "processor  : 0\n"
+                  "vendor_id  : Matsushita\n"
+                  "cpu core   : %s\n"
+                  "cpu rev    : %lu\n"
+                  "model name : " PROCESSOR_MODEL_NAME         "\n"
+                  "icache size: %lu\n"
+                  "dcache size: %lu\n",
+                  mn10300_cputypes[type],
+                  (cpurev & CPUREV_REVISION) >> CPUREV_REVISION_S,
+                  icachesz,
+                  dcachesz
+                  );
+
+       seq_printf(m,
+                  "ioclk speed: %lu.%02luMHz\n"
+                  "bogomips   : %lu.%02lu\n\n",
+                  MN10300_IOCLK / 1000000,
+                  (MN10300_IOCLK / 10000) % 100,
+                  loops_per_jiffy / (500000 / HZ),
+                  (loops_per_jiffy / (5000 / HZ)) % 100
+                  );
+
+       return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+       return *pos < NR_CPUS ? cpu_data + *pos : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+       ++*pos;
+       return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+struct seq_operations cpuinfo_op = {
+       .start  = c_start,
+       .next   = c_next,
+       .stop   = c_stop,
+       .show   = show_cpuinfo,
+};
diff --git a/arch/mn10300/kernel/sigframe.h b/arch/mn10300/kernel/sigframe.h
new file mode 100644 (file)
index 0000000..0decba2
--- /dev/null
@@ -0,0 +1,33 @@
+/* MN10300 Signal frame definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+struct sigframe
+{
+       void (*pretcode)(void);
+       int sig;
+       struct sigcontext *psc;
+       struct sigcontext sc;
+       struct fpucontext fpuctx;
+       unsigned long extramask[_NSIG_WORDS-1];
+       char retcode[8];
+};
+
+struct rt_sigframe
+{
+       void (*pretcode)(void);
+       int sig;
+       struct siginfo *pinfo;
+       void *puc;
+       struct siginfo info;
+       struct ucontext uc;
+       struct fpucontext fpuctx;
+       char retcode[8];
+};
diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
new file mode 100644 (file)
index 0000000..841ca99
--- /dev/null
@@ -0,0 +1,564 @@
+/* MN10300 Signal handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/tty.h>
+#include <linux/personality.h>
+#include <linux/suspend.h>
+#include <asm/cacheflush.h>
+#include <asm/ucontext.h>
+#include <asm/uaccess.h>
+#include <asm/fpu.h>
+#include "sigframe.h"
+
+#define DEBUG_SIG 0
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+/*
+ * atomically swap in the new signal mask, and wait for a signal.
+ */
+asmlinkage long sys_sigsuspend(int history0, int history1, old_sigset_t mask)
+{
+       mask &= _BLOCKABLE;
+       spin_lock_irq(&current->sighand->siglock);
+       current->saved_sigmask = current->blocked;
+       siginitset(&current->blocked, mask);
+       recalc_sigpending();
+       spin_unlock_irq(&current->sighand->siglock);
+
+       current->state = TASK_INTERRUPTIBLE;
+       schedule();
+       set_thread_flag(TIF_RESTORE_SIGMASK);
+       return -ERESTARTNOHAND;
+}
+
+/*
+ * set signal action syscall
+ */
+asmlinkage long sys_sigaction(int sig,
+                             const struct old_sigaction __user *act,
+                             struct old_sigaction __user *oact)
+{
+       struct k_sigaction new_ka, old_ka;
+       int ret;
+
+       if (act) {
+               old_sigset_t mask;
+               if (verify_area(VERIFY_READ, act, sizeof(*act)) ||
+                   __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
+                   __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
+                       return -EFAULT;
+               __get_user(new_ka.sa.sa_flags, &act->sa_flags);
+               __get_user(mask, &act->sa_mask);
+               siginitset(&new_ka.sa.sa_mask, mask);
+       }
+
+       ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+       if (!ret && oact) {
+               if (verify_area(VERIFY_WRITE, oact, sizeof(*oact)) ||
+                   __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
+                   __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
+                       return -EFAULT;
+               __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+               __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
+       }
+
+       return ret;
+}
+
+/*
+ * set alternate signal stack syscall
+ */
+asmlinkage long sys_sigaltstack(const stack_t __user *uss, stack_t *uoss)
+{
+       return do_sigaltstack(uss, uoss, __frame->sp);
+}
+
+/*
+ * do a signal return; undo the signal stack.
+ */
+static int restore_sigcontext(struct pt_regs *regs,
+                             struct sigcontext __user *sc, long *_d0)
+{
+       unsigned int err = 0;
+
+       if (is_using_fpu(current))
+               fpu_kill_state(current);
+
+#define COPY(x) err |= __get_user(regs->x, &sc->x)
+       COPY(d1); COPY(d2); COPY(d3);
+       COPY(a0); COPY(a1); COPY(a2); COPY(a3);
+       COPY(e0); COPY(e1); COPY(e2); COPY(e3);
+       COPY(e4); COPY(e5); COPY(e6); COPY(e7);
+       COPY(lar); COPY(lir);
+       COPY(mdr); COPY(mdrq);
+       COPY(mcvf); COPY(mcrl); COPY(mcrh);
+       COPY(sp); COPY(pc);
+#undef COPY
+
+       {
+               unsigned int tmpflags;
+#ifndef CONFIG_MN10300_USING_JTAG
+#define USER_EPSW (EPSW_FLAG_Z | EPSW_FLAG_N | EPSW_FLAG_C | EPSW_FLAG_V | \
+                  EPSW_T | EPSW_nAR)
+#else
+#define USER_EPSW (EPSW_FLAG_Z | EPSW_FLAG_N | EPSW_FLAG_C | EPSW_FLAG_V | \
+                  EPSW_nAR)
+#endif
+               err |= __get_user(tmpflags, &sc->epsw);
+               regs->epsw = (regs->epsw & ~USER_EPSW) |
+                 (tmpflags & USER_EPSW);
+               regs->orig_d0 = -1;             /* disable syscall checks */
+       }
+
+       {
+               struct fpucontext *buf;
+               err |= __get_user(buf, &sc->fpucontext);
+               if (buf) {
+                       if (verify_area(VERIFY_READ, buf, sizeof(*buf)))
+                               goto badframe;
+                       err |= fpu_restore_sigcontext(buf);
+               }
+       }
+
+       err |= __get_user(*_d0, &sc->d0);
+       return err;
+
+badframe:
+       return 1;
+}
+
+/*
+ * standard signal return syscall
+ */
+asmlinkage long sys_sigreturn(void)
+{
+       struct sigframe __user *frame = (struct sigframe __user *) __frame->sp;
+       sigset_t set;
+       long d0;
+
+       if (verify_area(VERIFY_READ, frame, sizeof(*frame)))
+               goto badframe;
+       if (__get_user(set.sig[0], &frame->sc.oldmask))
+               goto badframe;
+
+       if (_NSIG_WORDS > 1 &&
+           __copy_from_user(&set.sig[1], &frame->extramask,
+                            sizeof(frame->extramask)))
+               goto badframe;
+
+       sigdelsetmask(&set, ~_BLOCKABLE);
+       spin_lock_irq(&current->sighand->siglock);
+       current->blocked = set;
+       recalc_sigpending();
+       spin_unlock_irq(&current->sighand->siglock);
+
+       if (restore_sigcontext(__frame, &frame->sc, &d0))
+               goto badframe;
+
+       return d0;
+
+badframe:
+       force_sig(SIGSEGV, current);
+       return 0;
+}
+
+/*
+ * realtime signal return syscall
+ */
+asmlinkage long sys_rt_sigreturn(void)
+{
+       struct rt_sigframe __user *frame =
+               (struct rt_sigframe __user *) __frame->sp;
+       sigset_t set;
+       unsigned long d0;
+
+       if (verify_area(VERIFY_READ, frame, sizeof(*frame)))
+               goto badframe;
+       if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+               goto badframe;
+
+       sigdelsetmask(&set, ~_BLOCKABLE);
+       spin_lock_irq(&current->sighand->siglock);
+       current->blocked = set;
+       recalc_sigpending();
+       spin_unlock_irq(&current->sighand->siglock);
+
+       if (restore_sigcontext(__frame, &frame->uc.uc_mcontext, &d0))
+               goto badframe;
+
+       if (do_sigaltstack(&frame->uc.uc_stack, NULL, __frame->sp) == -EFAULT)
+               goto badframe;
+
+       return d0;
+
+badframe:
+       force_sig(SIGSEGV, current);
+       return 0;
+}
+
+/*
+ * store the userspace context into a signal frame
+ */
+static int setup_sigcontext(struct sigcontext __user *sc,
+                           struct fpucontext *fpuctx,
+                           struct pt_regs *regs,
+                           unsigned long mask)
+{
+       int tmp, err = 0;
+
+#define COPY(x) err |= __put_user(regs->x, &sc->x)
+       COPY(d0); COPY(d1); COPY(d2); COPY(d3);
+       COPY(a0); COPY(a1); COPY(a2); COPY(a3);
+       COPY(e0); COPY(e1); COPY(e2); COPY(e3);
+       COPY(e4); COPY(e5); COPY(e6); COPY(e7);
+       COPY(lar); COPY(lir);
+       COPY(mdr); COPY(mdrq);
+       COPY(mcvf); COPY(mcrl); COPY(mcrh);
+       COPY(sp); COPY(epsw); COPY(pc);
+#undef COPY
+
+       tmp = fpu_setup_sigcontext(fpuctx);
+       if (tmp < 0)
+               err = 1;
+       else
+               err |= __put_user(tmp ? fpuctx : NULL, &sc->fpucontext);
+
+       /* non-iBCS2 extensions.. */
+       err |= __put_user(mask, &sc->oldmask);
+
+       return err;
+}
+
+/*
+ * determine which stack to use..
+ */
+static inline void __user *get_sigframe(struct k_sigaction *ka,
+                                       struct pt_regs *regs,
+                                       size_t frame_size)
+{
+       unsigned long sp;
+
+       /* default to using normal stack */
+       sp = regs->sp;
+
+       /* this is the X/Open sanctioned signal stack switching.  */
+       if (ka->sa.sa_flags & SA_ONSTACK) {
+               if (!on_sig_stack(sp))
+                       sp = current->sas_ss_sp + current->sas_ss_size;
+       }
+
+       return (void __user *) ((sp - frame_size) & ~7UL);
+}
+
+/*
+ * set up a normal signal frame
+ */
+static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
+                      struct pt_regs *regs)
+{
+       struct sigframe __user *frame;
+       int rsig;
+
+       frame = get_sigframe(ka, regs, sizeof(*frame));
+
+       if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+               goto give_sigsegv;
+
+       rsig = sig;
+       if (sig < 32 &&
+           current_thread_info()->exec_domain &&
+           current_thread_info()->exec_domain->signal_invmap)
+               rsig = current_thread_info()->exec_domain->signal_invmap[sig];
+
+       if (__put_user(rsig, &frame->sig) < 0 ||
+           __put_user(&frame->sc, &frame->psc) < 0)
+               goto give_sigsegv;
+
+       if (setup_sigcontext(&frame->sc, &frame->fpuctx, regs, set->sig[0]))
+               goto give_sigsegv;
+
+       if (_NSIG_WORDS > 1) {
+               if (__copy_to_user(frame->extramask, &set->sig[1],
+                                  sizeof(frame->extramask)))
+                       goto give_sigsegv;
+       }
+
+       /* set up to return from userspace.  If provided, use a stub already in
+        * userspace */
+       if (ka->sa.sa_flags & SA_RESTORER) {
+               if (__put_user(ka->sa.sa_restorer, &frame->pretcode))
+                       goto give_sigsegv;
+       } else {
+               if (__put_user((void (*)(void))frame->retcode,
+                              &frame->pretcode))
+                       goto give_sigsegv;
+               /* this is mov $,d0; syscall 0 */
+               if (__put_user(0x2c, (char *)(frame->retcode + 0)) ||
+                   __put_user(__NR_sigreturn, (char *)(frame->retcode + 1)) ||
+                   __put_user(0x00, (char *)(frame->retcode + 2)) ||
+                   __put_user(0xf0, (char *)(frame->retcode + 3)) ||
+                   __put_user(0xe0, (char *)(frame->retcode + 4)))
+                       goto give_sigsegv;
+               flush_icache_range((unsigned long) frame->retcode,
+                                  (unsigned long) frame->retcode + 5);
+       }
+
+       /* set up registers for signal handler */
+       regs->sp = (unsigned long) frame;
+       regs->pc = (unsigned long) ka->sa.sa_handler;
+       regs->d0 = sig;
+       regs->d1 = (unsigned long) &frame->sc;
+
+       set_fs(USER_DS);
+
+       /* the tracer may want to single-step inside the handler */
+       if (test_thread_flag(TIF_SINGLESTEP))
+               ptrace_notify(SIGTRAP);
+
+#if DEBUG_SIG
+       printk(KERN_DEBUG "SIG deliver %d (%s:%d): sp=%p pc=%lx ra=%p\n",
+              sig, current->comm, current->pid, frame, regs->pc,
+              frame->pretcode);
+#endif
+
+       return 0;
+
+give_sigsegv:
+       force_sig(SIGSEGV, current);
+       return -EFAULT;
+}
+
+/*
+ * set up a realtime signal frame
+ */
+static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+                         sigset_t *set, struct pt_regs *regs)
+{
+       struct rt_sigframe __user *frame;
+       int rsig;
+
+       frame = get_sigframe(ka, regs, sizeof(*frame));
+
+       if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+               goto give_sigsegv;
+
+       rsig = sig;
+       if (sig < 32 &&
+           current_thread_info()->exec_domain &&
+           current_thread_info()->exec_domain->signal_invmap)
+               rsig = current_thread_info()->exec_domain->signal_invmap[sig];
+
+       if (__put_user(rsig, &frame->sig) ||
+           __put_user(&frame->info, &frame->pinfo) ||
+           __put_user(&frame->uc, &frame->puc) ||
+           copy_siginfo_to_user(&frame->info, info))
+               goto give_sigsegv;
+
+       /* create the ucontext.  */
+       if (__put_user(0, &frame->uc.uc_flags) ||
+           __put_user(0, &frame->uc.uc_link) ||
+           __put_user((void *)current->sas_ss_sp, &frame->uc.uc_stack.ss_sp) ||
+           __put_user(sas_ss_flags(regs->sp), &frame->uc.uc_stack.ss_flags) ||
+           __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size) ||
+           setup_sigcontext(&frame->uc.uc_mcontext,
+                            &frame->fpuctx, regs, set->sig[0]) ||
+           __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)))
+               goto give_sigsegv;
+
+       /* set up to return from userspace.  If provided, use a stub already in
+        * userspace */
+       if (ka->sa.sa_flags & SA_RESTORER) {
+               if (__put_user(ka->sa.sa_restorer, &frame->pretcode))
+                       goto give_sigsegv;
+       } else {
+               if (__put_user((void(*)(void))frame->retcode,
+                              &frame->pretcode) ||
+                   /* This is mov $,d0; syscall 0 */
+                   __put_user(0x2c, (char *)(frame->retcode + 0)) ||
+                   __put_user(__NR_rt_sigreturn,
+                              (char *)(frame->retcode + 1)) ||
+                   __put_user(0x00, (char *)(frame->retcode + 2)) ||
+                   __put_user(0xf0, (char *)(frame->retcode + 3)) ||
+                   __put_user(0xe0, (char *)(frame->retcode + 4)))
+                       goto give_sigsegv;
+
+               flush_icache_range((u_long) frame->retcode,
+                                  (u_long) frame->retcode + 5);
+       }
+
+       /* Set up registers for signal handler */
+       regs->sp = (unsigned long) frame;
+       regs->pc = (unsigned long) ka->sa.sa_handler;
+       regs->d0 = sig;
+       regs->d1 = (long) &frame->info;
+
+       set_fs(USER_DS);
+
+       /* the tracer may want to single-step inside the handler */
+       if (test_thread_flag(TIF_SINGLESTEP))
+               ptrace_notify(SIGTRAP);
+
+#if DEBUG_SIG
+       printk(KERN_DEBUG "SIG deliver %d (%s:%d): sp=%p pc=%lx ra=%p\n",
+              sig, current->comm, current->pid, frame, regs->pc,
+              frame->pretcode);
+#endif
+
+       return 0;
+
+give_sigsegv:
+       force_sig(SIGSEGV, current);
+       return -EFAULT;
+}
+
+/*
+ * handle the actual delivery of a signal to userspace
+ */
+static int handle_signal(int sig,
+                        siginfo_t *info, struct k_sigaction *ka,
+                        sigset_t *oldset, struct pt_regs *regs)
+{
+       int ret;
+
+       /* Are we from a system call? */
+       if (regs->orig_d0 >= 0) {
+               /* If so, check system call restarting.. */
+               switch (regs->d0) {
+               case -ERESTART_RESTARTBLOCK:
+               case -ERESTARTNOHAND:
+                       regs->d0 = -EINTR;
+                       break;
+
+               case -ERESTARTSYS:
+                       if (!(ka->sa.sa_flags & SA_RESTART)) {
+                               regs->d0 = -EINTR;
+                               break;
+                       }
+
+                       /* fallthrough */
+               case -ERESTARTNOINTR:
+                       regs->d0 = regs->orig_d0;
+                       regs->pc -= 2;
+               }
+       }
+
+       /* Set up the stack frame */
+       if (ka->sa.sa_flags & SA_SIGINFO)
+               ret = setup_rt_frame(sig, ka, info, oldset, regs);
+       else
+               ret = setup_frame(sig, ka, oldset, regs);
+
+       if (ret == 0) {
+               spin_lock_irq(&current->sighand->siglock);
+               sigorsets(&current->blocked, &current->blocked,
+                         &ka->sa.sa_mask);
+               if (!(ka->sa.sa_flags & SA_NODEFER))
+                       sigaddset(&current->blocked, sig);
+               recalc_sigpending();
+               spin_unlock_irq(&current->sighand->siglock);
+       }
+
+       return ret;
+}
+
+/*
+ * handle a potential signal
+ */
+static void do_signal(struct pt_regs *regs)
+{
+       struct k_sigaction ka;
+       siginfo_t info;
+       sigset_t *oldset;
+       int signr;
+
+       /* we want the common case to go fast, which is why we may in certain
+        * cases get here from kernel mode */
+       if (!user_mode(regs))
+               return;
+
+       if (test_thread_flag(TIF_RESTORE_SIGMASK))
+               oldset = &current->saved_sigmask;
+       else
+               oldset = &current->blocked;
+
+       signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+       if (signr > 0) {
+               if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
+                       /* a signal was successfully delivered; the saved
+                        * sigmask will have been stored in the signal frame,
+                        * and will be restored by sigreturn, so we can simply
+                        * clear the TIF_RESTORE_SIGMASK flag */
+                       if (test_thread_flag(TIF_RESTORE_SIGMASK))
+                               clear_thread_flag(TIF_RESTORE_SIGMASK);
+               }
+
+               return;
+       }
+
+       /* did we come from a system call? */
+       if (regs->orig_d0 >= 0) {
+               /* restart the system call - no handlers present */
+               switch (regs->d0) {
+               case -ERESTARTNOHAND:
+               case -ERESTARTSYS:
+               case -ERESTARTNOINTR:
+                       regs->d0 = regs->orig_d0;
+                       regs->pc -= 2;
+                       break;
+
+               case -ERESTART_RESTARTBLOCK:
+                       regs->d0 = __NR_restart_syscall;
+                       regs->pc -= 2;
+                       break;
+               }
+       }
+
+       /* if there's no signal to deliver, we just put the saved sigmask
+        * back */
+       if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+               clear_thread_flag(TIF_RESTORE_SIGMASK);
+               sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+       }
+}
+
+/*
+ * notification of userspace execution resumption
+ * - triggered by current->work.notify_resume
+ */
+asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags)
+{
+       /* Pending single-step? */
+       if (thread_info_flags & _TIF_SINGLESTEP) {
+#ifndef CONFIG_MN10300_USING_JTAG
+               regs->epsw |= EPSW_T;
+               clear_thread_flag(TIF_SINGLESTEP);
+#else
+               BUG(); /* no h/w single-step if using JTAG unit */
+#endif
+       }
+
+       /* deal with pending signal delivery */
+       if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+               do_signal(regs);
+}
diff --git a/arch/mn10300/kernel/switch_to.S b/arch/mn10300/kernel/switch_to.S
new file mode 100644 (file)
index 0000000..630aad7
--- /dev/null
@@ -0,0 +1,71 @@
+###############################################################################
+#
+# MN10300 Context switch operation
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/cpu-regs.h>
+
+       .text
+
+###############################################################################
+#
+# struct task_struct *__switch_to(struct thread_struct *prev,
+#                                struct thread_struct *next,
+#                                struct task_struct *prev_task)
+#
+###############################################################################
+ENTRY(__switch_to)
+       movm    [d2,d3,a2,a3,exreg1],(sp)
+       or      EPSW_NMID,epsw
+
+       mov     (44,sp),d2
+
+       mov     d0,a0
+       mov     d1,a1
+
+       # save prev context
+       mov     (__frame),d0
+       mov     d0,(THREAD_FRAME,a0)
+       mov     __switch_back,d0
+       mov     d0,(THREAD_PC,a0)
+       mov     sp,a2
+       mov     a2,(THREAD_SP,a0)
+       mov     a3,(THREAD_A3,a0)
+
+       mov     (THREAD_A3,a1),a3
+       mov     (THREAD_SP,a1),a2
+
+       # switch
+       mov     a2,sp
+
+       # load next context
+       GET_THREAD_INFO a2
+       mov     a2,(__current_ti)
+       mov     (TI_task,a2),a2
+       mov     a2,(__current)
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+       mov     a2,e2
+#endif
+
+       mov     (THREAD_FRAME,a1),a2
+       mov     a2,(__frame)
+       mov     (THREAD_PC,a1),a2
+       mov     d2,d0                   # for ret_from_fork
+       mov     d0,a0                   # for __switch_to
+
+       jmp     (a2)
+
+__switch_back:
+       and     ~EPSW_NMID,epsw
+       ret     [d2,d3,a2,a3,exreg1],32
diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c
new file mode 100644 (file)
index 0000000..5f17a1e
--- /dev/null
@@ -0,0 +1,193 @@
+/* MN10300 Weird system calls
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/syscalls.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/stat.h>
+#include <linux/mman.h>
+#include <linux/file.h>
+#include <linux/utsname.h>
+#include <linux/syscalls.h>
+#include <linux/tty.h>
+
+#include <asm/uaccess.h>
+
+#define MIN_MAP_ADDR   PAGE_SIZE       /* minimum fixed mmap address */
+
+/*
+ * sys_pipe() is the normal C calling standard for creating
+ * a pipe. It's not the way Unix traditionally does this, though.
+ */
+asmlinkage long sys_pipe(unsigned long __user *fildes)
+{
+       int fd[2];
+       int error;
+
+       error = do_pipe(fd);
+       if (!error) {
+               if (copy_to_user(fildes, fd, 2 * sizeof(int)))
+                       error = -EFAULT;
+       }
+       return error;
+}
+
+/*
+ * memory mapping syscall
+ */
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+                         unsigned long prot, unsigned long flags,
+                         unsigned long fd, unsigned long pgoff)
+{
+       struct file *file = NULL;
+       long error = -EINVAL;
+
+       flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+
+       if (flags & MAP_FIXED && addr < MIN_MAP_ADDR)
+               goto out;
+
+       error = -EBADF;
+       if (!(flags & MAP_ANONYMOUS)) {
+               file = fget(fd);
+               if (!file)
+                       goto out;
+       }
+
+       down_write(&current->mm->mmap_sem);
+       error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+       up_write(&current->mm->mmap_sem);
+
+       if (file)
+               fput(file);
+out:
+       return error;
+}
+
+asmlinkage long old_mmap(unsigned long addr, unsigned long len,
+                        unsigned long prot, unsigned long flags,
+                        unsigned long fd, unsigned long offset)
+{
+       if (offset & ~PAGE_MASK)
+               return -EINVAL;
+       return sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
+}
+
+struct sel_arg_struct {
+       unsigned long n;
+       fd_set *inp;
+       fd_set *outp;
+       fd_set *exp;
+       struct timeval *tvp;
+};
+
+asmlinkage int old_select(struct sel_arg_struct __user *arg)
+{
+       struct sel_arg_struct a;
+
+       if (copy_from_user(&a, arg, sizeof(a)))
+               return -EFAULT;
+       /* sys_select() does the appropriate kernel locking */
+       return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
+}
+
+/*
+ * sys_ipc() is the de-multiplexer for the SysV IPC calls..
+ *
+ * This is really horribly ugly.
+ */
+asmlinkage long sys_ipc(uint call, int first, int second,
+                       int third, void __user *ptr, long fifth)
+{
+       int version, ret;
+
+       version = call >> 16; /* hack for backward compatibility */
+       call &= 0xffff;
+
+       switch (call) {
+       case SEMOP:
+               return sys_semtimedop(first, (struct sembuf __user *)ptr,
+                                     second, NULL);
+       case SEMTIMEDOP:
+               return sys_semtimedop(first, (struct sembuf __user *)ptr,
+                                     second,
+                                     (const struct timespec __user *)fifth);
+       case SEMGET:
+               return sys_semget(first, second, third);
+       case SEMCTL: {
+               union semun fourth;
+               if (!ptr)
+                       return -EINVAL;
+               if (get_user(fourth.__pad, (void __user * __user *) ptr))
+                       return -EFAULT;
+               return sys_semctl(first, second, third, fourth);
+       }
+
+       case MSGSND:
+               return sys_msgsnd(first, (struct msgbuf __user *) ptr,
+                                 second, third);
+       case MSGRCV:
+               switch (version) {
+               case 0: {
+                       struct ipc_kludge tmp;
+                       if (!ptr)
+                               return -EINVAL;
+
+                       if (copy_from_user(&tmp,
+                                          (struct ipc_kludge __user *) ptr,
+                                          sizeof(tmp)))
+                               return -EFAULT;
+                       return sys_msgrcv(first, tmp.msgp, second,
+                                         tmp.msgtyp, third);
+               }
+               default:
+                       return sys_msgrcv(first,
+                                         (struct msgbuf __user *) ptr,
+                                          second, fifth, third);
+               }
+       case MSGGET:
+               return sys_msgget((key_t) first, second);
+       case MSGCTL:
+               return sys_msgctl(first, second,
+                                  (struct msqid_ds __user *) ptr);
+
+       case SHMAT:
+               switch (version) {
+               default: {
+                       ulong raddr;
+                       ret = do_shmat(first, (char __user *) ptr, second,
+                                      &raddr);
+                       if (ret)
+                               return ret;
+                       return put_user(raddr, (ulong *) third);
+               }
+               case 1: /* iBCS2 emulator entry point */
+                       if (!segment_eq(get_fs(), get_ds()))
+                               return -EINVAL;
+                       return do_shmat(first, (char __user *) ptr, second,
+                                       (ulong *) third);
+               }
+       case SHMDT:
+               return sys_shmdt((char __user *)ptr);
+       case SHMGET:
+               return sys_shmget(first, second, third);
+       case SHMCTL:
+               return sys_shmctl(first, second,
+                                 (struct shmid_ds __user *) ptr);
+       default:
+               return -EINVAL;
+       }
+}
diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c
new file mode 100644 (file)
index 0000000..ff492e3
--- /dev/null
@@ -0,0 +1,129 @@
+/* MN10300 Low level time management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/i386/kernel/time.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/profile.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+#include <asm/processor.h>
+#include <asm/intctl-regs.h>
+#include <asm/rtc.h>
+
+#ifdef CONFIG_MN10300_RTC
+unsigned long mn10300_ioclk;           /* system I/O clock frequency */
+unsigned long mn10300_iobclk;          /* system I/O clock frequency */
+unsigned long mn10300_tsc_per_HZ;      /* number of ioclks per jiffy */
+#endif /* CONFIG_MN10300_RTC */
+
+static unsigned long mn10300_last_tsc; /* time-stamp counter at last time
+                                        * interrupt occurred */
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id);
+
+static struct irqaction timer_irq = {
+       .handler        = timer_interrupt,
+       .flags          = IRQF_DISABLED | IRQF_SHARED | IRQF_TIMER,
+       .mask           = CPU_MASK_NONE,
+       .name           = "timer",
+};
+
+/*
+ * scheduler clock - returns current time in nanosec units.
+ */
+unsigned long long sched_clock(void)
+{
+       union {
+               unsigned long long l;
+               u32 w[2];
+       } quot;
+
+       quot.w[0] = mn10300_last_tsc - get_cycles();
+       quot.w[1] = 1000000000;
+
+       asm("mulu %2,%3,%0,%1"
+           : "=r"(quot.w[1]), "=r"(quot.w[0])
+           : "0"(quot.w[1]), "1"(quot.w[0])
+           : "cc");
+
+       do_div(quot.l, MN10300_TSCCLK);
+
+       return quot.l;
+}
+
+/*
+ * advance the kernel's time keeping clocks (xtime and jiffies)
+ * - we use Timer 0 & 1 cascaded as a clock to nudge us the next time
+ *   there's a need to update
+ */
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+       unsigned tsc, elapse;
+
+       write_seqlock(&xtime_lock);
+
+       while (tsc = get_cycles(),
+              elapse = mn10300_last_tsc - tsc, /* time elapsed since last
+                                                * tick */
+              elapse > MN10300_TSC_PER_HZ
+              ) {
+               mn10300_last_tsc -= MN10300_TSC_PER_HZ;
+
+               /* advance the kernel's time tracking system */
+               profile_tick(CPU_PROFILING);
+               do_timer(1);
+               update_process_times(user_mode(get_irq_regs()));
+               check_rtc_time();
+       }
+
+       write_sequnlock(&xtime_lock);
+       return IRQ_HANDLED;
+}
+
+/*
+ * initialise the various timers used by the main part of the kernel
+ */
+void __init time_init(void)
+{
+       /* we need the prescalar running to be able to use IOCLK/8
+        * - IOCLK runs at 1/4 (ST5 open) or 1/8 (ST5 closed) internal CPU clock
+        * - IOCLK runs at Fosc rate (crystal speed)
+        */
+       TMPSCNT |= TMPSCNT_ENABLE;
+
+       startup_timestamp_counter();
+
+       printk(KERN_INFO
+              "timestamp counter I/O clock running at %lu.%02lu"
+              " (calibrated against RTC)\n",
+              MN10300_TSCCLK / 1000000, (MN10300_TSCCLK / 10000) % 100);
+
+       xtime.tv_sec = get_initial_rtc_time();
+       xtime.tv_nsec = 0;
+
+       mn10300_last_tsc = TMTSCBC;
+
+       /* use timer 0 & 1 cascaded to tick at as close to HZ as possible */
+       setup_irq(TMJCIRQ, &timer_irq);
+
+       set_intr_level(TMJCIRQ, TMJCICR_LEVEL);
+
+       startup_jiffies_counter();
+
+#ifdef CONFIG_MN10300_WD_TIMER
+       /* start the watchdog timer */
+       watchdog_go();
+#endif
+}
diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c
new file mode 100644 (file)
index 0000000..8b9dc6d
--- /dev/null
@@ -0,0 +1,619 @@
+/* MN10300 Exception handling
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/kallsyms.h>
+#include <linux/pci.h>
+#include <linux/kdebug.h>
+#include <linux/bug.h>
+#include <linux/irq.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include <asm/smp.h>
+#include <asm/pgalloc.h>
+#include <asm/cacheflush.h>
+#include <asm/cpu-regs.h>
+#include <asm/busctl-regs.h>
+#include <asm/unit/leds.h>
+#include <asm/fpu.h>
+#include <asm/gdb-stub.h>
+#include <asm/sections.h>
+
+#if (CONFIG_INTERRUPT_VECTOR_BASE & 0xffffff)
+#error "INTERRUPT_VECTOR_BASE not aligned to 16MiB boundary!"
+#endif
+
+struct pt_regs *__frame; /* current frame pointer */
+EXPORT_SYMBOL(__frame);
+
+int kstack_depth_to_print = 24;
+
+spinlock_t die_lock = __SPIN_LOCK_UNLOCKED(die_lock);
+
+ATOMIC_NOTIFIER_HEAD(mn10300_die_chain);
+
+/*
+ * These constants are for searching for possible module text
+ * segments. MODULE_RANGE is a guess of how much space is likely
+ * to be vmalloced.
+ */
+#define MODULE_RANGE (8 * 1024 * 1024)
+
+#define DO_ERROR(signr, prologue, str, name)                   \
+asmlinkage void name(struct pt_regs *regs, u32 intcode)                \
+{                                                              \
+       prologue;                                               \
+       if (die_if_no_fixup(str, regs, intcode))                \
+               return;                                         \
+       force_sig(signr, current);                              \
+}
+
+#define DO_EINFO(signr, prologue, str, name, sicode)                   \
+asmlinkage void name(struct pt_regs *regs, u32 intcode)                        \
+{                                                                      \
+       siginfo_t info;                                                 \
+       prologue;                                                       \
+       if (die_if_no_fixup(str, regs, intcode))                        \
+               return;                                                 \
+       info.si_signo = signr;                                          \
+       if (signr == SIGILL && sicode == ILL_ILLOPC) {                  \
+               uint8_t opcode;                                         \
+               if (get_user(opcode, (uint8_t __user *)regs->pc) == 0)  \
+                       if (opcode == 0xff)                             \
+                               info.si_signo = SIGTRAP;                \
+       }                                                               \
+       info.si_errno = 0;                                              \
+       info.si_code = sicode;                                          \
+       info.si_addr = (void *) regs->pc;                               \
+       force_sig_info(info.si_signo, &info, current);                  \
+}
+
+DO_ERROR(SIGTRAP, {}, "trap",                  trap);
+DO_ERROR(SIGSEGV, {}, "ibreak",                        ibreak);
+DO_ERROR(SIGSEGV, {}, "obreak",                        obreak);
+DO_EINFO(SIGSEGV, {}, "access error",          access_error,   SEGV_ACCERR);
+DO_EINFO(SIGSEGV, {}, "insn access error",     insn_acc_error, SEGV_ACCERR);
+DO_EINFO(SIGSEGV, {}, "data access error",     data_acc_error, SEGV_ACCERR);
+DO_EINFO(SIGILL,  {}, "privileged opcode",     priv_op,        ILL_PRVOPC);
+DO_EINFO(SIGILL,  {}, "invalid opcode",                invalid_op,     ILL_ILLOPC);
+DO_EINFO(SIGILL,  {}, "invalid ex opcode",     invalid_exop,   ILL_ILLOPC);
+DO_EINFO(SIGBUS,  {}, "invalid address",       mem_error,      BUS_ADRERR);
+DO_EINFO(SIGBUS,  {}, "bus error",             bus_error,      BUS_ADRERR);
+DO_EINFO(SIGILL,  {}, "FPU invalid opcode",    fpu_invalid_op, ILL_COPROC);
+
+DO_ERROR(SIGTRAP,
+#ifndef CONFIG_MN10300_USING_JTAG
+        DCR &= ~0x0001,
+#else
+        {},
+#endif
+        "single step", istep);
+
+/*
+ * handle NMI
+ */
+asmlinkage void nmi(struct pt_regs *regs, enum exception_code code)
+{
+       /* see if gdbstub wants to deal with it */
+#ifdef CONFIG_GDBSTUB
+       if (gdbstub_intercept(regs, code))
+               return;
+#endif
+
+       printk(KERN_WARNING "--- Register Dump ---\n");
+       show_registers(regs);
+       printk(KERN_WARNING "---------------------\n");
+}
+
+/*
+ * show a stack trace from the specified stack pointer
+ */
+void show_trace(unsigned long *sp)
+{
+       unsigned long *stack, addr, module_start, module_end;
+       int i;
+
+       printk(KERN_EMERG "\n"
+              KERN_EMERG "Call Trace:");
+
+       stack = sp;
+       i = 0;
+       module_start = VMALLOC_START;
+       module_end = VMALLOC_END;
+
+       while (((long) stack & (THREAD_SIZE - 1)) != 0) {
+               addr = *stack++;
+               if (__kernel_text_address(addr)) {
+#if 1
+                       printk(" [<%08lx>]", addr);
+                       print_symbol(" %s", addr);
+                       printk("\n");
+#else
+                       if ((i % 6) == 0)
+                               printk("\n" KERN_EMERG "  ");
+                       printk("[<%08lx>] ", addr);
+                       i++;
+#endif
+               }
+       }
+
+       printk("\n");
+}
+
+/*
+ * show the raw stack from the specified stack pointer
+ */
+void show_stack(struct task_struct *task, unsigned long *sp)
+{
+       unsigned long *stack;
+       int i;
+
+       if (!sp)
+               sp = (unsigned long *) &sp;
+
+       stack = sp;
+       printk(KERN_EMERG "Stack:");
+       for (i = 0; i < kstack_depth_to_print; i++) {
+               if (((long) stack & (THREAD_SIZE - 1)) == 0)
+                       break;
+               if ((i % 8) == 0)
+                       printk("\n" KERN_EMERG "  ");
+               printk("%08lx ", *stack++);
+       }
+
+       show_trace(sp);
+}
+
+/*
+ * the architecture-independent dump_stack generator
+ */
+void dump_stack(void)
+{
+       unsigned long stack;
+
+       show_stack(current, &stack);
+}
+EXPORT_SYMBOL(dump_stack);
+
+/*
+ * dump the register file in the specified exception frame
+ */
+void show_registers_only(struct pt_regs *regs)
+{
+       unsigned long ssp;
+
+       ssp = (unsigned long) regs + sizeof(*regs);
+
+       printk(KERN_EMERG "PC:  %08lx EPSW:  %08lx  SSP: %08lx mode: %s\n",
+              regs->pc, regs->epsw, ssp, user_mode(regs) ? "User" : "Super");
+       printk(KERN_EMERG "d0:  %08lx   d1:  %08lx   d2: %08lx   d3: %08lx\n",
+              regs->d0, regs->d1, regs->d2, regs->d3);
+       printk(KERN_EMERG "a0:  %08lx   a1:  %08lx   a2: %08lx   a3: %08lx\n",
+              regs->a0, regs->a1, regs->a2, regs->a3);
+       printk(KERN_EMERG "e0:  %08lx   e1:  %08lx   e2: %08lx   e3: %08lx\n",
+              regs->e0, regs->e1, regs->e2, regs->e3);
+       printk(KERN_EMERG "e4:  %08lx   e5:  %08lx   e6: %08lx   e7: %08lx\n",
+              regs->e4, regs->e5, regs->e6, regs->e7);
+       printk(KERN_EMERG "lar: %08lx   lir: %08lx  mdr: %08lx  usp: %08lx\n",
+              regs->lar, regs->lir, regs->mdr, regs->sp);
+       printk(KERN_EMERG "cvf: %08lx   crl: %08lx  crh: %08lx  drq: %08lx\n",
+              regs->mcvf, regs->mcrl, regs->mcrh, regs->mdrq);
+       printk(KERN_EMERG "threadinfo=%p task=%p)\n",
+              current_thread_info(), current);
+
+       if ((unsigned long) current >= 0x90000000UL &&
+           (unsigned long) current < 0x94000000UL)
+               printk(KERN_EMERG "Process %s (pid: %d)\n",
+                      current->comm, current->pid);
+
+       printk(KERN_EMERG "CPUP:   %04hx\n", CPUP);
+       printk(KERN_EMERG "TBR:    %08x\n", TBR);
+       printk(KERN_EMERG "DEAR:   %08x\n", DEAR);
+       printk(KERN_EMERG "sISR:   %08x\n", sISR);
+       printk(KERN_EMERG "NMICR:  %04hx\n", NMICR);
+       printk(KERN_EMERG "BCBERR: %08x\n", BCBERR);
+       printk(KERN_EMERG "BCBEAR: %08x\n", BCBEAR);
+       printk(KERN_EMERG "MMUFCR: %08x\n", MMUFCR);
+       printk(KERN_EMERG "IPTEU : %08x  IPTEL2: %08x\n", IPTEU, IPTEL2);
+       printk(KERN_EMERG "DPTEU:  %08x  DPTEL2: %08x\n", DPTEU, DPTEL2);
+}
+
+/*
+ * dump the registers and the stack
+ */
+void show_registers(struct pt_regs *regs)
+{
+       unsigned long sp;
+       int i;
+
+       show_registers_only(regs);
+
+       if (!user_mode(regs))
+               sp = (unsigned long) regs + sizeof(*regs);
+       else
+               sp = regs->sp;
+
+       /* when in-kernel, we also print out the stack and code at the
+        * time of the fault..
+        */
+       if (!user_mode(regs)) {
+               printk(KERN_EMERG "\n");
+               show_stack(current, (unsigned long *) sp);
+
+#if 0
+               printk(KERN_EMERG "\n"
+                      KERN_EMERG "Code: ");
+               if (regs->pc < PAGE_OFFSET)
+                       goto bad;
+
+               for (i = 0; i < 20; i++) {
+                       unsigned char c;
+                       if (__get_user(c, &((unsigned char *) regs->pc)[i]))
+                               goto bad;
+                       printk("%02x ", c);
+               }
+#else
+               i = 0;
+#endif
+       }
+
+       printk("\n");
+       return;
+
+#if 0
+bad:
+       printk(KERN_EMERG " Bad PC value.");
+       break;
+#endif
+}
+
+/*
+ *
+ */
+void show_trace_task(struct task_struct *tsk)
+{
+       unsigned long sp = tsk->thread.sp;
+
+       /* User space on another CPU? */
+       if ((sp ^ (unsigned long) tsk) & (PAGE_MASK << 1))
+               return;
+
+       show_trace((unsigned long *) sp);
+}
+
+/*
+ * note the untimely death of part of the kernel
+ */
+void die(const char *str, struct pt_regs *regs, enum exception_code code)
+{
+       console_verbose();
+       spin_lock_irq(&die_lock);
+       printk(KERN_EMERG "\n"
+              KERN_EMERG "%s: %04x\n",
+              str, code & 0xffff);
+       show_registers(regs);
+
+       if (regs->pc >= 0x02000000 && regs->pc < 0x04000000 &&
+           (regs->epsw & (EPSW_IM | EPSW_IE)) != (EPSW_IM | EPSW_IE)) {
+               printk(KERN_EMERG "Exception in usermode interrupt handler\n");
+               printk(KERN_EMERG "\n"
+                      KERN_EMERG "  Please connect to kernel debugger !!\n");
+               asm volatile ("0: bra 0b");
+       }
+
+       spin_unlock_irq(&die_lock);
+       do_exit(SIGSEGV);
+}
+
+/*
+ * see if there's a fixup handler we can force a jump to when an exception
+ * happens due to something kernel code did
+ */
+int die_if_no_fixup(const char *str, struct pt_regs *regs,
+                   enum exception_code code)
+{
+       if (user_mode(regs))
+               return 0;
+
+       peripheral_leds_display_exception(code);
+
+       switch (code) {
+               /* see if we can fixup the kernel accessing memory */
+       case EXCEP_ITLBMISS:
+       case EXCEP_DTLBMISS:
+       case EXCEP_IAERROR:
+       case EXCEP_DAERROR:
+       case EXCEP_MEMERR:
+       case EXCEP_MISALIGN:
+       case EXCEP_BUSERROR:
+       case EXCEP_ILLDATACC:
+       case EXCEP_IOINSACC:
+       case EXCEP_PRIVINSACC:
+       case EXCEP_PRIVDATACC:
+       case EXCEP_DATINSACC:
+               if (fixup_exception(regs))
+                       return 1;
+       case EXCEP_UNIMPINS:
+               if (regs->pc && *(uint8_t *)regs->pc == 0xff)
+                       if (notify_die(DIE_BREAKPOINT, str, regs, code, 0, 0))
+                               return 1;
+               break;
+       default:
+               break;
+       }
+
+       /* see if gdbstub wants to deal with it */
+#ifdef CONFIG_GDBSTUB
+       if (gdbstub_intercept(regs, code))
+               return 1;
+#endif
+
+       if (notify_die(DIE_GPF, str, regs, code, 0, 0))
+               return 1;
+
+       /* make the process die as the last resort */
+       die(str, regs, code);
+}
+
+/*
+ * handle unsupported syscall instructions (syscall 1-15)
+ */
+static asmlinkage void unsupported_syscall(struct pt_regs *regs,
+                                          enum exception_code code)
+{
+       struct task_struct *tsk = current;
+       siginfo_t info;
+
+       /* catch a kernel BUG() */
+       if (code == EXCEP_SYSCALL15 && !user_mode(regs)) {
+               if (report_bug(regs->pc, regs) == BUG_TRAP_TYPE_BUG) {
+#ifdef CONFIG_GDBSTUB
+                       __gdbstub_bug_trap();
+#endif
+               }
+       }
+
+       regs->pc -= 2; /* syscall return addr is _after_ the instruction */
+
+       die_if_no_fixup("An unsupported syscall insn was used by the kernel\n",
+                       regs, code);
+
+       info.si_signo   = SIGILL;
+       info.si_errno   = ENOSYS;
+       info.si_code    = ILL_ILLTRP;
+       info.si_addr    = (void *) regs->pc;
+       force_sig_info(SIGILL, &info, tsk);
+}
+
+/*
+ * display the register file when the stack pointer gets clobbered
+ */
+asmlinkage void do_double_fault(struct pt_regs *regs)
+{
+       struct task_struct *tsk = current;
+
+       strcpy(tsk->comm, "emergency tsk");
+       tsk->pid = 0;
+       console_verbose();
+       printk(KERN_EMERG "--- double fault ---\n");
+       show_registers(regs);
+}
+
+/*
+ * asynchronous bus error (external, usually I/O DMA)
+ */
+asmlinkage void io_bus_error(u32 bcberr, u32 bcbear, struct pt_regs *regs)
+{
+       console_verbose();
+
+       printk(KERN_EMERG "\n"
+              KERN_EMERG "Asynchronous I/O Bus Error\n"
+              KERN_EMERG "==========================\n");
+
+       if (bcberr & BCBERR_BEME)
+               printk(KERN_EMERG "- Multiple recorded errors\n");
+
+       printk(KERN_EMERG "- Faulting Buses:%s%s%s\n",
+              bcberr & BCBERR_BEMR_CI  ? " CPU-Ins-Fetch" : "",
+              bcberr & BCBERR_BEMR_CD  ? " CPU-Data" : "",
+              bcberr & BCBERR_BEMR_DMA ? " DMA" : "");
+
+       printk(KERN_EMERG "- %s %s access made to %s at address %08x\n",
+              bcberr & BCBERR_BEBST ? "Burst" : "Single",
+              bcberr & BCBERR_BERW ? "Read" : "Write",
+              bcberr & BCBERR_BESB_MON  ? "Monitor Space" :
+              bcberr & BCBERR_BESB_IO   ? "Internal CPU I/O Space" :
+              bcberr & BCBERR_BESB_EX   ? "External I/O Bus" :
+              bcberr & BCBERR_BESB_OPEX ? "External Memory Bus" :
+              "On Chip Memory",
+              bcbear
+              );
+
+       printk(KERN_EMERG "- Detected by the %s\n",
+              bcberr&BCBERR_BESD ? "Bus Control Unit" : "Slave Bus");
+
+#ifdef CONFIG_PCI
+#define BRIDGEREGB(X) (*(volatile __u8  *)(0xBE040000 + (X)))
+#define BRIDGEREGW(X) (*(volatile __u16 *)(0xBE040000 + (X)))
+#define BRIDGEREGL(X) (*(volatile __u32 *)(0xBE040000 + (X)))
+
+       printk(KERN_EMERG "- PCI Memory Paging Reg:         %08x\n",
+              *(volatile __u32 *) (0xBFFFFFF4));
+       printk(KERN_EMERG "- PCI Bridge Base Address 0:     %08x\n",
+              BRIDGEREGL(PCI_BASE_ADDRESS_0));
+       printk(KERN_EMERG "- PCI Bridge AMPCI Base Address: %08x\n",
+              BRIDGEREGL(0x48));
+       printk(KERN_EMERG "- PCI Bridge Command:                %04hx\n",
+              BRIDGEREGW(PCI_COMMAND));
+       printk(KERN_EMERG "- PCI Bridge Status:                 %04hx\n",
+              BRIDGEREGW(PCI_STATUS));
+       printk(KERN_EMERG "- PCI Bridge Int Status:         %08hx\n",
+              BRIDGEREGL(0x4c));
+#endif
+
+       printk(KERN_EMERG "\n");
+       show_registers(regs);
+
+       panic("Halted due to asynchronous I/O Bus Error\n");
+}
+
+/*
+ * handle an exception for which a handler has not yet been installed
+ */
+asmlinkage void uninitialised_exception(struct pt_regs *regs,
+                                       enum exception_code code)
+{
+
+       /* see if gdbstub wants to deal with it */
+#ifdef CONFIG_GDBSTUB
+       if (gdbstub_intercept(regs, code))
+               return;
+#endif
+
+       peripheral_leds_display_exception(code);
+       printk(KERN_EMERG "Uninitialised Exception 0x%04x\n", code & 0xFFFF);
+       show_registers(regs);
+
+       for (;;)
+               continue;
+}
+
+/*
+ * set an interrupt stub to jump to a handler
+ * ! NOTE: this does *not* flush the caches
+ */
+void __init __set_intr_stub(enum exception_code code, void *handler)
+{
+       unsigned long addr;
+       u8 *vector = (u8 *)(CONFIG_INTERRUPT_VECTOR_BASE + code);
+
+       addr = (unsigned long) handler - (unsigned long) vector;
+       vector[0] = 0xdc;               /* JMP handler */
+       vector[1] = addr;
+       vector[2] = addr >> 8;
+       vector[3] = addr >> 16;
+       vector[4] = addr >> 24;
+       vector[5] = 0xcb;
+       vector[6] = 0xcb;
+       vector[7] = 0xcb;
+}
+
+/*
+ * set an interrupt stub to jump to a handler
+ */
+void __init set_intr_stub(enum exception_code code, void *handler)
+{
+       unsigned long addr;
+       u8 *vector = (u8 *)(CONFIG_INTERRUPT_VECTOR_BASE + code);
+
+       addr = (unsigned long) handler - (unsigned long) vector;
+       vector[0] = 0xdc;               /* JMP handler */
+       vector[1] = addr;
+       vector[2] = addr >> 8;
+       vector[3] = addr >> 16;
+       vector[4] = addr >> 24;
+       vector[5] = 0xcb;
+       vector[6] = 0xcb;
+       vector[7] = 0xcb;
+
+       mn10300_dcache_flush_inv();
+       mn10300_icache_inv();
+}
+
+/*
+ * set an interrupt stub to invoke the JTAG unit and then jump to a handler
+ */
+void __init set_jtag_stub(enum exception_code code, void *handler)
+{
+       unsigned long addr;
+       u8 *vector = (u8 *)(CONFIG_INTERRUPT_VECTOR_BASE + code);
+
+       addr = (unsigned long) handler - ((unsigned long) vector + 1);
+       vector[0] = 0xff;               /* PI to jump into JTAG debugger */
+       vector[1] = 0xdc;               /* jmp handler */
+       vector[2] = addr;
+       vector[3] = addr >> 8;
+       vector[4] = addr >> 16;
+       vector[5] = addr >> 24;
+       vector[6] = 0xcb;
+       vector[7] = 0xcb;
+
+       mn10300_dcache_flush_inv();
+       flush_icache_range((unsigned long) vector, (unsigned long) vector + 8);
+}
+
+/*
+ * initialise the exception table
+ */
+void __init trap_init(void)
+{
+       set_excp_vector(EXCEP_TRAP,             trap);
+       set_excp_vector(EXCEP_ISTEP,            istep);
+       set_excp_vector(EXCEP_IBREAK,           ibreak);
+       set_excp_vector(EXCEP_OBREAK,           obreak);
+
+       set_excp_vector(EXCEP_PRIVINS,          priv_op);
+       set_excp_vector(EXCEP_UNIMPINS,         invalid_op);
+       set_excp_vector(EXCEP_UNIMPEXINS,       invalid_exop);
+       set_excp_vector(EXCEP_MEMERR,           mem_error);
+       set_excp_vector(EXCEP_MISALIGN,         misalignment);
+       set_excp_vector(EXCEP_BUSERROR,         bus_error);
+       set_excp_vector(EXCEP_ILLINSACC,        insn_acc_error);
+       set_excp_vector(EXCEP_ILLDATACC,        data_acc_error);
+       set_excp_vector(EXCEP_IOINSACC,         insn_acc_error);
+       set_excp_vector(EXCEP_PRIVINSACC,       insn_acc_error);
+       set_excp_vector(EXCEP_PRIVDATACC,       data_acc_error);
+       set_excp_vector(EXCEP_DATINSACC,        insn_acc_error);
+       set_excp_vector(EXCEP_FPU_DISABLED,     fpu_disabled);
+       set_excp_vector(EXCEP_FPU_UNIMPINS,     fpu_invalid_op);
+       set_excp_vector(EXCEP_FPU_OPERATION,    fpu_exception);
+
+       set_excp_vector(EXCEP_NMI,              nmi);
+
+       set_excp_vector(EXCEP_SYSCALL1,         unsupported_syscall);
+       set_excp_vector(EXCEP_SYSCALL2,         unsupported_syscall);
+       set_excp_vector(EXCEP_SYSCALL3,         unsupported_syscall);
+       set_excp_vector(EXCEP_SYSCALL4,         unsupported_syscall);
+       set_excp_vector(EXCEP_SYSCALL5,         unsupported_syscall);
+       set_excp_vector(EXCEP_SYSCALL6,         unsupported_syscall);
+       set_excp_vector(EXCEP_SYSCALL7,         unsupported_syscall);
+       set_excp_vector(EXCEP_SYSCALL8,         unsupported_syscall);
+       set_excp_vector(EXCEP_SYSCALL9,         unsupported_syscall);
+       set_excp_vector(EXCEP_SYSCALL10,        unsupported_syscall);
+       set_excp_vector(EXCEP_SYSCALL11,        unsupported_syscall);
+       set_excp_vector(EXCEP_SYSCALL12,        unsupported_syscall);
+       set_excp_vector(EXCEP_SYSCALL13,        unsupported_syscall);
+       set_excp_vector(EXCEP_SYSCALL14,        unsupported_syscall);
+       set_excp_vector(EXCEP_SYSCALL15,        unsupported_syscall);
+}
+
+/*
+ * determine if a program counter value is a valid bug address
+ */
+int is_valid_bugaddr(unsigned long pc)
+{
+       return pc >= PAGE_OFFSET;
+}
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
new file mode 100644 (file)
index 0000000..a3e80f4
--- /dev/null
@@ -0,0 +1,159 @@
+/* MN10300 Main kernel linker script
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#define __VMLINUX_LDS__
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/thread_info.h>
+
+OUTPUT_FORMAT("elf32-am33lin", "elf32-am33lin", "elf32-am33lin")
+OUTPUT_ARCH(mn10300)
+ENTRY(_start)
+jiffies = jiffies_64;
+#ifndef CONFIG_MN10300_CURRENT_IN_E2
+current = __current;
+#endif
+SECTIONS
+{
+  . = CONFIG_KERNEL_TEXT_ADDRESS;
+  /* read-only */
+  _stext = .;
+  _text = .;                   /* Text and read-only data */
+  .text : {
+       *(
+       .text.head
+       .text
+       )
+       TEXT_TEXT
+       SCHED_TEXT
+       LOCK_TEXT
+       KPROBES_TEXT
+       *(.fixup)
+       *(.gnu.warning)
+       } = 0xcb
+
+  _etext = .;                  /* End of text section */
+
+  . = ALIGN(16);               /* Exception table */
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  BUG_TABLE
+
+  RODATA
+
+  /* writeable */
+  .data : {                    /* Data */
+       DATA_DATA
+       CONSTRUCTORS
+       }
+
+  . = ALIGN(4096);
+  __nosave_begin = .;
+  .data_nosave : { *(.data.nosave) }
+  . = ALIGN(4096);
+  __nosave_end = .;
+
+  . = ALIGN(4096);
+  .data.page_aligned : { *(.data.idt) }
+
+  . = ALIGN(32);
+  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+
+  /* rarely changed data like cpu maps */
+  . = ALIGN(32);
+  .data.read_mostly : AT(ADDR(.data.read_mostly)) {
+       *(.data.read_mostly)
+       _edata = .;             /* End of data section */
+  }
+
+  . = ALIGN(THREAD_SIZE);      /* init_task */
+  .data.init_task : { *(.data.init_task) }
+
+  /* might get freed after init */
+  . = ALIGN(4096);
+  .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
+       __smp_locks = .;
+       *(.smp_locks)
+       __smp_locks_end = .;
+  }
+
+  /* will be freed after init */
+  . = ALIGN(4096);             /* Init code and data */
+  __init_begin = .;
+  .init.text : {
+       _sinittext = .;
+       *(.init.text)
+       _einittext = .;
+  }
+  .init.data : { *(.init.data) }
+  . = ALIGN(16);
+  __setup_start = .;
+  .setup.init : { KEEP(*(.init.setup)) }
+  __setup_end = .;
+
+  __initcall_start = .;
+  .initcall.init : {
+       INITCALLS
+  }
+  __initcall_end = .;
+  __con_initcall_start = .;
+  .con_initcall.init : { *(.con_initcall.init) }
+  __con_initcall_end = .;
+
+  SECURITY_INIT
+  . = ALIGN(4);
+  __alt_instructions = .;
+  .altinstructions : { *(.altinstructions) }
+  __alt_instructions_end = .;
+ .altinstr_replacement : { *(.altinstr_replacement) }
+  /* .exit.text is discard at runtime, not link time, to deal with references
+     from .altinstructions and .eh_frame */
+  .exit.text : { *(.exit.text) }
+  .exit.data : { *(.exit.data) }
+
+#ifdef CONFIG_BLK_DEV_INITRD
+  . = ALIGN(4096);
+  __initramfs_start = .;
+  .init.ramfs : { *(.init.ramfs) }
+  __initramfs_end = .;
+#endif
+
+  . = ALIGN(32);
+  __per_cpu_start = .;
+  .data.percpu  : { *(.data.percpu) }
+  __per_cpu_end = .;
+  . = ALIGN(4096);
+  __init_end = .;
+  /* freed after init ends here */
+
+  __bss_start = .;             /* BSS */
+  .bss : {
+       *(.bss.page_aligned)
+       *(.bss)
+  }
+  . = ALIGN(4);
+  __bss_stop = .;
+
+  _end = . ;
+
+  /* This is where the kernel creates the early boot page tables */
+  . = ALIGN(4096);
+  pg0 = .;
+
+  /* Sections to be discarded */
+  /DISCARD/ : {
+       *(.exitcall.exit)
+       }
+
+  STABS_DEBUG
+
+  DWARF_DEBUG
+}
diff --git a/arch/mn10300/lib/Makefile b/arch/mn10300/lib/Makefile
new file mode 100644 (file)
index 0000000..fdfa9ec
--- /dev/null
@@ -0,0 +1,7 @@
+#
+# Makefile for the MN10300-specific library files..
+#
+
+lib-y = delay.o usercopy.o checksum.o bitops.o memcpy.o memmove.o memset.o
+lib-y += do_csum.o
+lib-y += __ashldi3.o __ashrdi3.o __lshrdi3.o negdi2.o
diff --git a/arch/mn10300/lib/__ashldi3.S b/arch/mn10300/lib/__ashldi3.S
new file mode 100644 (file)
index 0000000..a51a950
--- /dev/null
@@ -0,0 +1,51 @@
+/* MN10300 64-bit arithmetic left shift
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+        .text
+        .balign        L1_CACHE_BYTES
+
+###############################################################################
+#
+# unsigned long long __ashldi3(unsigned long long value [D1:D0],
+#                             unsigned by [(12,SP)])
+#
+###############################################################################
+        .globl __ashldi3
+        .type  __ashldi3,@function
+__ashldi3:
+       mov     (12,sp),a0
+       and     +63,a0
+       beq     __ashldi3_zero
+
+       cmp     +31,a0
+       bhi     __ashldi3_32plus
+
+       # the count is in the range 1-31
+       asl     a0,d1
+
+       mov     +32,a1
+       sub     a0,a1,a1                        # a1 = 32 - count
+       lsr     a1,d0,a1                        # get overflow from LSW -> MSW
+
+       or_asl  a1,d1,a0,d0                     # insert overflow into MSW and
+                                               # shift the LSW
+       rets
+
+       .balign L1_CACHE_BYTES
+       # the count is in the range 32-63
+__ashldi3_32plus:
+       asl     a0,d0,d1
+       clr     d0
+__ashldi3_zero:
+       rets
+
+       .size   __ashldi3, .-__ashldi3
diff --git a/arch/mn10300/lib/__ashrdi3.S b/arch/mn10300/lib/__ashrdi3.S
new file mode 100644 (file)
index 0000000..6f42382
--- /dev/null
@@ -0,0 +1,52 @@
+/* MN10300 64-bit arithmetic right shift
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+        .text
+        .balign        L1_CACHE_BYTES
+
+###############################################################################
+#
+# unsigned long long __ashrdi3(unsigned long long value [D1:D0],
+#                             unsigned by [(12,SP)])
+#
+###############################################################################
+        .globl __ashrdi3
+        .type  __ashrdi3,@function
+__ashrdi3:
+       mov     (12,sp),a0
+       and     +63,a0
+       beq     __ashrdi3_zero
+
+       cmp     +31,a0
+       bhi     __ashrdi3_32plus
+
+       # the count is in the range 1-31
+       lsr     a0,d0
+
+       mov     +32,a1
+       sub     a0,a1,a1                        # a1 = 32 - count
+       asl     a1,d1,a1                        # get underflow from MSW -> LSW
+
+       or_asr  a1,d0,a0,d1                     # insert underflow into LSW and
+                                               # shift the MSW
+       rets
+
+       .balign L1_CACHE_BYTES
+       # the count is in the range 32-63
+__ashrdi3_32plus:
+       asr     a0,d1,d0
+       ext     d0                              # sign-extend result through MDR
+       mov     mdr,d1
+__ashrdi3_zero:
+       rets
+
+       .size   __ashrdi3, .-__ashrdi3
diff --git a/arch/mn10300/lib/__lshrdi3.S b/arch/mn10300/lib/__lshrdi3.S
new file mode 100644 (file)
index 0000000..a686aef
--- /dev/null
@@ -0,0 +1,52 @@
+/* MN10300 64-bit logical right shift
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <asm/cache.h>
+
+        .text
+        .balign        L1_CACHE_BYTES
+
+###############################################################################
+#
+# unsigned long long __lshrdi3(unsigned long long value [D1:D0],
+#                             unsigned by [(12,SP)])
+#
+###############################################################################
+        .globl __lshrdi3
+        .type  __lshrdi3,@function
+__lshrdi3:
+       mov     (12,sp),a0
+       and     +63,a0
+       beq     __lshrdi3_zero
+
+       cmp     +31,a0
+       bhi     __lshrdi3_32plus
+
+       # the count is in the range 1-31
+       lsr     a0,d0
+
+       mov     +32,a1
+       sub     a0,a1,a1                        # a1 = 32 - count
+       asl     a1,d1,a1                        # get underflow from MSW -> LSW
+
+       or_lsr  a1,d0,a0,d1                     # insert underflow into LSW and
+                                               # shift the MSW
+       rets
+
+       .balign L1_CACHE_BYTES
+       # the count is in the range 32-63
+__lshrdi3_32plus:
+       lsr     a0,d1,d0
+       clr     d1
+__lshrdi3_zero:
+       rets
+
+       .size   __lshrdi3, .-__lshrdi3
diff --git a/arch/mn10300/lib/ashrdi3.c b/arch/mn10300/lib/ashrdi3.c
new file mode 100644 (file)
index 0000000..c54f61d
--- /dev/null
@@ -0,0 +1,61 @@
+/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
+/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public Licence as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public Licence for more details.
+
+You should have received a copy of the GNU General Public Licence
+along with GNU CC; see the file COPYING.  If not, write to
+the Free Software Foundation, 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.  */
+
+#define BITS_PER_UNIT 8
+
+typedef         int SItype     __attribute__((mode(SI)));
+typedef unsigned int USItype   __attribute__((mode(SI)));
+typedef                 int DItype     __attribute__((mode(DI)));
+typedef                 int word_type  __attribute__((mode(__word__)));
+
+struct DIstruct {
+       SItype low;
+       SItype high;
+};
+
+union DIunion {
+       struct DIstruct s;
+       DItype          ll;
+};
+
+DItype __ashrdi3(DItype u, word_type b)
+{
+       union DIunion w;
+       union DIunion uu;
+       word_type bm;
+
+       if (b == 0)
+               return u;
+
+       uu.ll = u;
+
+       bm = (sizeof(SItype) * BITS_PER_UNIT) - b;
+       if (bm <= 0) {
+               /* w.s.high = 1..1 or 0..0 */
+               w.s.high = uu.s.high >> (sizeof(SItype) * BITS_PER_UNIT - 1);
+               w.s.low = uu.s.high >> -bm;
+       } else {
+               USItype carries = (USItype)uu.s.high << bm;
+               w.s.high = uu.s.high >> b;
+               w.s.low = ((USItype)uu.s.low >> b) | carries;
+       }
+
+       return w.ll;
+}
diff --git a/arch/mn10300/lib/bitops.c b/arch/mn10300/lib/bitops.c
new file mode 100644 (file)
index 0000000..440a7dc
--- /dev/null
@@ -0,0 +1,51 @@
+/* MN10300 Non-trivial bit operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <asm/bitops.h>
+#include <asm/system.h>
+
+/*
+ * try flipping a bit using BSET and BCLR
+ */
+void change_bit(int nr, volatile void *addr)
+{
+       if (test_bit(nr, addr))
+               goto try_clear_bit;
+
+try_set_bit:
+       if (!test_and_set_bit(nr, addr))
+               return;
+
+try_clear_bit:
+       if (test_and_clear_bit(nr, addr))
+               return;
+
+       goto try_set_bit;
+}
+
+/*
+ * try flipping a bit using BSET and BCLR and returning the old value
+ */
+int test_and_change_bit(int nr, volatile void *addr)
+{
+       if (test_bit(nr, addr))
+               goto try_clear_bit;
+
+try_set_bit:
+       if (!test_and_set_bit(nr, addr))
+               return 0;
+
+try_clear_bit:
+       if (test_and_clear_bit(nr, addr))
+               return 1;
+
+       goto try_set_bit;
+}
diff --git a/arch/mn10300/lib/checksum.c b/arch/mn10300/lib/checksum.c
new file mode 100644 (file)
index 0000000..274f29e
--- /dev/null
@@ -0,0 +1,99 @@
+/* MN10300 Optimised checksumming wrappers
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+#include <asm/checksum.h>
+#include "internal.h"
+
+static inline unsigned short from32to16(__wsum sum)
+{
+       asm("   add     %1,%0           \n"
+           "   addc    0xffff,%0       \n"
+           : "=r" (sum)
+           : "r" (sum << 16), "0" (sum & 0xffff0000)
+           );
+       return sum >> 16;
+}
+
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+       return ~do_csum(iph, ihl * 4);
+}
+EXPORT_SYMBOL(ip_fast_csum);
+
+__wsum csum_partial(const void *buff, int len, __wsum sum)
+{
+       __wsum result;
+
+       result = do_csum(buff, len);
+       result += sum;
+       if (sum > result)
+               result++;
+       return result;
+}
+EXPORT_SYMBOL(csum_partial);
+
+__sum16 ip_compute_csum(const void *buff, int len)
+{
+       return ~from32to16(do_csum(buff, len));
+}
+EXPORT_SYMBOL(ip_compute_csum);
+
+__wsum csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
+{
+       copy_from_user(dst, src, len);
+       return csum_partial(dst, len, sum);
+}
+EXPORT_SYMBOL(csum_partial_copy);
+
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+                                int len, __wsum sum)
+{
+       sum = csum_partial(src, len, sum);
+       memcpy(dst, src, len);
+       return sum;
+}
+EXPORT_SYMBOL(csum_partial_copy_nocheck);
+
+__wsum csum_partial_copy_from_user(const void *src, void *dst,
+                                  int len, __wsum sum,
+                                  int *err_ptr)
+{
+       int missing;
+
+       missing = copy_from_user(dst, src, len);
+       if (missing) {
+               memset(dst + len - missing, 0, missing);
+               *err_ptr = -EFAULT;
+       }
+
+       return csum_partial(dst, len, sum);
+}
+EXPORT_SYMBOL(csum_partial_copy_from_user);
+
+__wsum csum_and_copy_to_user(const void *src, void *dst,
+                            int len, __wsum sum,
+                            int *err_ptr)
+{
+       int missing;
+
+       missing = copy_to_user(dst, src, len);
+       if (missing) {
+               memset(dst + len - missing, 0, missing);
+               *err_ptr = -EFAULT;
+       }
+
+       return csum_partial(src, len, sum);
+}
+EXPORT_SYMBOL(csum_and_copy_to_user);
diff --git a/arch/mn10300/lib/delay.c b/arch/mn10300/lib/delay.c
new file mode 100644 (file)
index 0000000..cce66bc
--- /dev/null
@@ -0,0 +1,50 @@
+/* MN10300 Short delay interpolation routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <asm/div64.h>
+
+/*
+ * basic delay loop
+ */
+void __delay(unsigned long loops)
+{
+       int d0;
+
+       asm volatile(
+               "       bra     1f      \n"
+               "       .align  4       \n"
+               "1:     bra     2f      \n"
+               "       .align  4       \n"
+               "2:     add     -1,%0   \n"
+               "       bne     2b      \n"
+               : "=&d" (d0)
+               : "0" (loops));
+}
+EXPORT_SYMBOL(__delay);
+
+/*
+ * handle a delay specified in terms of microseconds
+ */
+void __udelay(unsigned long usecs)
+{
+       signed long ioclk, stop;
+
+       /* usecs * CLK / 1E6 */
+       stop = __muldiv64u(usecs, MN10300_TSCCLK, 1000000);
+       stop = TMTSCBC - stop;
+
+       do {
+               ioclk = TMTSCBC;
+       } while (stop < ioclk);
+}
+EXPORT_SYMBOL(__udelay);
diff --git a/arch/mn10300/lib/do_csum.S b/arch/mn10300/lib/do_csum.S
new file mode 100644 (file)
index 0000000..e138994
--- /dev/null
@@ -0,0 +1,162 @@
+/* Optimised simple memory checksum
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+        .section .text
+        .balign        L1_CACHE_BYTES
+
+###############################################################################
+#
+# unsigned int do_csum(const unsigned char *buff, size_t len)
+#
+###############################################################################
+       .globl  do_csum
+        .type  do_csum,@function
+do_csum:
+       movm    [d2,d3],(sp)
+       mov     d0,(12,sp)
+       mov     d1,(16,sp)
+       mov     d1,d2                           # count
+       mov     d0,a0                           # buff
+       clr     d1                              # accumulator
+
+       cmp     +0,d2
+       beq     do_csum_done                    # return if zero-length buffer
+
+       # 4-byte align the buffer pointer
+       btst    +3,a0
+       beq     do_csum_now_4b_aligned
+
+       btst    +1,a0
+       beq     do_csum_addr_not_odd
+       movbu   (a0),d0
+       inc     a0
+       asl     +8,d0
+       add     d0,d1
+       addc    +0,d1
+       add     -1,d2
+do_csum_addr_not_odd:
+
+       cmp     +2,d2
+       bcs     do_csum_fewer_than_4
+       btst    +2,a0
+       beq     do_csum_now_4b_aligned
+       movhu   (a0+),d0
+       add     d0,d1
+       addc    +0,d1
+       add     -2,d2
+       cmp     +4,d2
+       bcs     do_csum_fewer_than_4
+
+do_csum_now_4b_aligned:
+       # we want to checksum as much as we can in chunks of 32 bytes
+       cmp     +31,d2
+       bls     do_csum_remainder               # 4-byte aligned remainder
+
+       add     -32,d2
+       mov     +32,d3
+
+do_csum_loop:
+       mov     (a0+),d0
+       add     d0,d1
+       mov     (a0+),e0
+       addc    e0,d1
+       mov     (a0+),e1
+       addc    e1,d1
+       mov     (a0+),e3
+       addc    e3,d1
+       mov     (a0+),d0
+       addc    d0,d1
+       mov     (a0+),e0
+       addc    e0,d1
+       mov     (a0+),e1
+       addc    e1,d1
+       mov     (a0+),e3
+       addc    e3,d1
+       addc    +0,d1
+
+       sub     d3,d2
+       bcc     do_csum_loop
+
+       add     d3,d2
+       beq     do_csum_done
+
+do_csum_remainder:
+       # cut 16-31 bytes down to 0-15
+       cmp     +16,d2
+       bcs     do_csum_fewer_than_16
+       mov     (a0+),d0
+       add     d0,d1
+       mov     (a0+),e0
+       addc    e0,d1
+       mov     (a0+),e1
+       addc    e1,d1
+       mov     (a0+),e3
+       addc    e3,d1
+       addc    +0,d1
+       add     -16,d2
+       beq     do_csum_done
+
+do_csum_fewer_than_16:
+       # copy the remaining whole words
+       cmp     +4,d2
+       bcs     do_csum_fewer_than_4
+       cmp     +8,d2
+       bcs     do_csum_one_word
+       cmp     +12,d2
+       bcs     do_csum_two_words
+       mov     (a0+),d0
+       add     d0,d1
+       addc    +0,d1
+do_csum_two_words:
+       mov     (a0+),d0
+       add     d0,d1
+       addc    +0,d1
+do_csum_one_word:
+       mov     (a0+),d0
+       add     d0,d1
+       addc    +0,d1
+
+do_csum_fewer_than_4:
+       and     +3,d2
+       beq     do_csum_done
+       xor_cmp d0,d0,+2,d2
+       bcs     do_csum_fewer_than_2
+       movhu   (a0+),d0
+do_csum_fewer_than_2:
+       and     +1,d2
+       beq     do_csum_add_last_bit
+       movbu   (a0),d3
+       add     d3,d0
+do_csum_add_last_bit:
+       add     d0,d1
+       addc    +0,d1
+
+do_csum_done:
+       # compress the checksum down to 16 bits
+       mov     +0xffff0000,d2
+       and     d1,d2
+       asl     +16,d1
+       add     d2,d1,d0
+       addc    +0xffff,d0
+       lsr     +16,d0
+
+       # flip the halves of the word result if the buffer was oddly aligned
+       mov     (12,sp),d1
+       and     +1,d1
+       beq     do_csum_not_oddly_aligned
+       swaph   d0,d0                           # exchange bits 15:8 with 7:0
+
+do_csum_not_oddly_aligned:
+       ret     [d2,d3],8
+
+do_csum_end:
+       .size   do_csum, do_csum_end-do_csum
diff --git a/arch/mn10300/lib/internal.h b/arch/mn10300/lib/internal.h
new file mode 100644 (file)
index 0000000..0014eee
--- /dev/null
@@ -0,0 +1,15 @@
+/* Internal definitions for the arch part of the kernel library
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+/*
+ * do_csum.S
+ */
+extern unsigned int do_csum(const unsigned char *, size_t);
diff --git a/arch/mn10300/lib/lshrdi3.c b/arch/mn10300/lib/lshrdi3.c
new file mode 100644 (file)
index 0000000..e05e64e
--- /dev/null
@@ -0,0 +1,60 @@
+/* lshrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
+/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public Licence as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public Licence for more details.
+
+You should have received a copy of the GNU General Public Licence
+along with GNU CC; see the file COPYING.  If not, write to
+the Free Software Foundation, 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.  */
+
+#define BITS_PER_UNIT 8
+
+typedef         int SItype     __attribute__((mode(SI)));
+typedef unsigned int USItype   __attribute__((mode(SI)));
+typedef                 int DItype     __attribute__((mode(DI)));
+typedef                 int word_type  __attribute__((mode(__word__)));
+
+struct DIstruct {
+       SItype  low;
+       SItype  high;
+};
+
+union DIunion {
+       struct DIstruct s;
+       DItype          ll;
+};
+
+DItype __lshrdi3(DItype u, word_type b)
+{
+       union DIunion w;
+       word_type bm;
+       union DIunion uu;
+
+       if (b == 0)
+               return u;
+
+       uu.ll = u;
+
+       bm = (sizeof(SItype) * BITS_PER_UNIT) - b;
+       if (bm <= 0) {
+               w.s.high = 0;
+               w.s.low = (USItype) uu.s.high >> -bm;
+       } else {
+               USItype carries = (USItype) uu.s.high << bm;
+               w.s.high = (USItype) uu.s.high >> b;
+               w.s.low = ((USItype) uu.s.low >> b) | carries;
+       }
+
+       return w.ll;
+}
diff --git a/arch/mn10300/lib/memcpy.S b/arch/mn10300/lib/memcpy.S
new file mode 100644 (file)
index 0000000..25fb9bb
--- /dev/null
@@ -0,0 +1,135 @@
+/* MN10300 Optimised simple memory to memory copy
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+        .section .text
+        .balign        L1_CACHE_BYTES
+
+###############################################################################
+#
+# void *memcpy(void *dst, const void *src, size_t n)
+#
+###############################################################################
+       .globl  memcpy
+        .type  memcpy,@function
+memcpy:
+       movm    [d2,d3],(sp)
+       mov     d0,(12,sp)
+       mov     d1,(16,sp)
+       mov     (20,sp),d2                      # count
+       mov     d0,a0                           # dst
+       mov     d1,a1                           # src
+       mov     d0,e3                           # the return value
+
+       cmp     +0,d2
+       beq     memcpy_done                     # return if zero-length copy
+
+       # see if the three parameters are all four-byte aligned
+       or      d0,d1,d3
+       or      d2,d3
+       and     +3,d3
+       bne     memcpy_1                        # jump if not
+
+       # we want to transfer as much as we can in chunks of 32 bytes
+       cmp     +31,d2
+       bls     memcpy_4_remainder              # 4-byte aligned remainder
+
+       movm    [exreg1],(sp)
+       add     -32,d2
+       mov     +32,d3
+
+memcpy_4_loop:
+       mov     (a1+),d0
+       mov     (a1+),d1
+       mov     (a1+),e0
+       mov     (a1+),e1
+       mov     (a1+),e4
+       mov     (a1+),e5
+       mov     (a1+),e6
+       mov     (a1+),e7
+       mov     d0,(a0+)
+       mov     d1,(a0+)
+       mov     e0,(a0+)
+       mov     e1,(a0+)
+       mov     e4,(a0+)
+       mov     e5,(a0+)
+       mov     e6,(a0+)
+       mov     e7,(a0+)
+
+       sub     d3,d2
+       bcc     memcpy_4_loop
+
+       movm    (sp),[exreg1]
+       add     d3,d2
+       beq     memcpy_4_no_remainder
+
+memcpy_4_remainder:
+       # cut 4-7 words down to 0-3
+       cmp     +16,d2
+       bcs     memcpy_4_three_or_fewer_words
+       mov     (a1+),d0
+       mov     (a1+),d1
+       mov     (a1+),e0
+       mov     (a1+),e1
+       mov     d0,(a0+)
+       mov     d1,(a0+)
+       mov     e0,(a0+)
+       mov     e1,(a0+)
+       add     -16,d2
+       beq     memcpy_4_no_remainder
+
+       # copy the remaining 1, 2 or 3 words
+memcpy_4_three_or_fewer_words:
+       cmp     +8,d2
+       bcs     memcpy_4_one_word
+       beq     memcpy_4_two_words
+       mov     (a1+),d0
+       mov     d0,(a0+)
+memcpy_4_two_words:
+       mov     (a1+),d0
+       mov     d0,(a0+)
+memcpy_4_one_word:
+       mov     (a1+),d0
+       mov     d0,(a0+)
+
+memcpy_4_no_remainder:
+       # check we copied the correct amount
+       # TODO: REMOVE CHECK
+       sub     e3,a0,d2
+       mov     (20,sp),d1
+       cmp     d2,d1
+       beq     memcpy_done
+       break
+       break
+       break
+
+memcpy_done:
+       mov     e3,a0
+       ret     [d2,d3],8
+
+       # handle misaligned copying
+memcpy_1:
+       add     -1,d2
+       mov     +1,d3
+       setlb                                   # setlb requires the next insns
+                                               # to occupy exactly 4 bytes
+
+       sub     d3,d2
+       movbu   (a1),d0
+       movbu   d0,(a0)
+       add_add d3,a1,d3,a0
+       lcc
+
+       mov     e3,a0
+       ret     [d2,d3],8
+
+memcpy_end:
+       .size   memcpy, memcpy_end-memcpy
diff --git a/arch/mn10300/lib/memmove.S b/arch/mn10300/lib/memmove.S
new file mode 100644 (file)
index 0000000..20b07b6
--- /dev/null
@@ -0,0 +1,160 @@
+/* MN10300 Optimised simple memory to memory copy, with support for overlapping
+ * regions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+        .section .text
+        .balign        L1_CACHE_BYTES
+
+###############################################################################
+#
+# void *memmove(void *dst, const void *src, size_t n)
+#
+###############################################################################
+       .globl  memmove
+        .type  memmove,@function
+memmove:
+       # fall back to memcpy if dst < src to work bottom up
+       cmp     d1,d0
+       bcs     memmove_memcpy
+
+       # work top down
+       movm    [d2,d3],(sp)
+       mov     d0,(12,sp)
+       mov     d1,(16,sp)
+       mov     (20,sp),d2                      # count
+       add     d0,d2,a0                        # dst end
+       add     d1,d2,a1                        # src end
+       mov     d0,e3                           # the return value
+
+       cmp     +0,d2
+       beq     memmove_done                    # return if zero-length copy
+
+       # see if the three parameters are all four-byte aligned
+       or      d0,d1,d3
+       or      d2,d3
+       and     +3,d3
+       bne     memmove_1                       # jump if not
+
+       # we want to transfer as much as we can in chunks of 32 bytes
+       add     -4,a1
+       cmp     +31,d2
+       bls     memmove_4_remainder             # 4-byte aligned remainder
+
+       add     -32,d2
+       mov     +32,d3
+
+memmove_4_loop:
+       mov     (a1),d0
+       sub_sub +4,a1,+4,a0
+       mov     d0,(a0)
+       mov     (a1),d1
+       sub_sub +4,a1,+4,a0
+       mov     d1,(a0)
+
+       mov     (a1),d0
+       sub_sub +4,a1,+4,a0
+       mov     d0,(a0)
+       mov     (a1),d1
+       sub_sub +4,a1,+4,a0
+       mov     d1,(a0)
+
+       mov     (a1),d0
+       sub_sub +4,a1,+4,a0
+       mov     d0,(a0)
+       mov     (a1),d1
+       sub_sub +4,a1,+4,a0
+       mov     d1,(a0)
+
+       mov     (a1),d0
+       sub_sub +4,a1,+4,a0
+       mov     d0,(a0)
+       mov     (a1),d1
+       sub_sub +4,a1,+4,a0
+       mov     d1,(a0)
+
+       sub     d3,d2
+       bcc     memmove_4_loop
+
+       add     d3,d2
+       beq     memmove_4_no_remainder
+
+memmove_4_remainder:
+       # cut 4-7 words down to 0-3
+       cmp     +16,d2
+       bcs     memmove_4_three_or_fewer_words
+       mov     (a1),d0
+       sub_sub +4,a1,+4,a0
+       mov     d0,(a0)
+       mov     (a1),d1
+       sub_sub +4,a1,+4,a0
+       mov     d1,(a0)
+       mov     (a1),e0
+       sub_sub +4,a1,+4,a0
+       mov     e0,(a0)
+       mov     (a1),e1
+       sub_sub +4,a1,+4,a0
+       mov     e1,(a0)
+       add     -16,d2
+       beq     memmove_4_no_remainder
+
+       # copy the remaining 1, 2 or 3 words
+memmove_4_three_or_fewer_words:
+       cmp     +8,d2
+       bcs     memmove_4_one_word
+       beq     memmove_4_two_words
+       mov     (a1),d0
+       sub_sub +4,a1,+4,a0
+       mov     d0,(a0)
+memmove_4_two_words:
+       mov     (a1),d0
+       sub_sub +4,a1,+4,a0
+       mov     d0,(a0)
+memmove_4_one_word:
+       mov     (a1),d0
+       sub_sub +4,a1,+4,a0
+       mov     d0,(a0)
+
+memmove_4_no_remainder:
+       # check we copied the correct amount
+       # TODO: REMOVE CHECK
+       sub     e3,a0,d2
+       beq     memmove_done
+       break
+       break
+       break
+
+memmove_done:
+       mov     e3,a0
+       ret     [d2,d3],8
+
+       # handle misaligned copying
+memmove_1:
+       add     -1,a1
+       add     -1,d2
+       mov     +1,d3
+       setlb                                   # setlb requires the next insns
+                                               # to occupy exactly 4 bytes
+
+       sub     d3,d2
+       movbu   (a1),d0
+       sub_sub d3,a1,d3,a0
+       movbu   d0,(a0)
+       lcc
+
+       mov     e3,a0
+       ret     [d2,d3],8
+
+memmove_memcpy:
+       jmp     memcpy
+
+memmove_end:
+       .size   memmove, memmove_end-memmove
diff --git a/arch/mn10300/lib/memset.S b/arch/mn10300/lib/memset.S
new file mode 100644 (file)
index 0000000..bc02e39
--- /dev/null
@@ -0,0 +1,121 @@
+/* Optimised simple memory fill
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+        .section .text
+        .balign        L1_CACHE_BYTES
+
+###############################################################################
+#
+# void *memset(void *dst, int c, size_t n)
+#
+###############################################################################
+       .globl  memset
+        .type  memset,@function
+memset:
+       movm    [d2,d3],(sp)
+       mov     d0,(12,sp)
+       mov     d1,(16,sp)
+       mov     (20,sp),d2                      # count
+       mov     d0,a0                           # dst
+       mov     d0,e3                           # the return value
+
+       cmp     +0,d2
+       beq     memset_done                     # return if zero-length fill
+
+       # see if the region parameters are four-byte aligned
+       or      d0,d2,d3
+       and     +3,d3
+       bne     memset_1                        # jump if not
+
+       extbu   d1
+       mov_asl d1,d3,8,d1
+       or_asl  d1,d3,8,d1
+       or_asl  d1,d3,8,d1
+       or      d3,d1
+
+       # we want to transfer as much as we can in chunks of 32 bytes
+       cmp     +31,d2
+       bls     memset_4_remainder              # 4-byte aligned remainder
+
+       add     -32,d2
+       mov     +32,d3
+
+memset_4_loop:
+       mov     d1,(a0+)
+       mov     d1,(a0+)
+       mov     d1,(a0+)
+       mov     d1,(a0+)
+       mov     d1,(a0+)
+       mov     d1,(a0+)
+       mov     d1,(a0+)
+       mov     d1,(a0+)
+
+       sub     d3,d2
+       bcc     memset_4_loop
+
+       add     d3,d2
+       beq     memset_4_no_remainder
+
+memset_4_remainder:
+       # cut 4-7 words down to 0-3
+       cmp     +16,d2
+       bcs     memset_4_three_or_fewer_words
+       mov     d1,(a0+)
+       mov     d1,(a0+)
+       mov     d1,(a0+)
+       mov     d1,(a0+)
+       add     -16,d2
+       beq     memset_4_no_remainder
+
+       # copy the remaining 1, 2 or 3 words
+memset_4_three_or_fewer_words:
+       cmp     +8,d2
+       bcs     memset_4_one_word
+       beq     memset_4_two_words
+       mov     d1,(a0+)
+memset_4_two_words:
+       mov     d1,(a0+)
+memset_4_one_word:
+       mov     d1,(a0+)
+
+memset_4_no_remainder:
+       # check we set the correct amount
+       # TODO: REMOVE CHECK
+       sub     e3,a0,d2
+       mov     (20,sp),d1
+       cmp     d2,d1
+       beq     memset_done
+       break
+       break
+       break
+
+memset_done:
+       mov     e3,a0
+       ret     [d2,d3],8
+
+       # handle misaligned copying
+memset_1:
+       add     -1,d2
+       mov     +1,d3
+       setlb                                   # setlb requires the next insns
+                                               # to occupy exactly 4 bytes
+
+       sub     d3,d2
+       movbu   d1,(a0)
+       inc     a0
+       lcc
+
+       mov     e3,a0
+       ret     [d2,d3],8
+
+memset_end:
+       .size   memset, memset_end-memset
diff --git a/arch/mn10300/lib/negdi2.c b/arch/mn10300/lib/negdi2.c
new file mode 100644 (file)
index 0000000..eae4ecd
--- /dev/null
@@ -0,0 +1,57 @@
+/* More subroutines needed by GCC output code on some machines.  */
+/* Compile this one with gcc.  */
+/* Copyright (C) 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+   2000, 2001  Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public Licence as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+In addition to the permissions in the GNU General Public Licence, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file.  (The General Public Licence restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public Licence for more details.
+
+You should have received a copy of the GNU General Public Licence
+along with GNU CC; see the file COPYING.  If not, write to
+the Free Software Foundation, 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.  */
+
+/* It is incorrect to include config.h here, because this file is being
+   compiled for the target, and hence definitions concerning only the host
+   do not apply.  */
+
+#include <linux/types.h>
+
+union DWunion {
+       s64 ll;
+       struct {
+               s32 low;
+               s32 high;
+       } s;
+};
+
+s64 __negdi2(s64 u)
+{
+       union DWunion w;
+       union DWunion uu;
+
+       uu.ll = u;
+
+       w.s.low = -uu.s.low;
+       w.s.high = -uu.s.high - ((u32) w.s.low > 0);
+
+       return w.ll;
+}
diff --git a/arch/mn10300/lib/usercopy.c b/arch/mn10300/lib/usercopy.c
new file mode 100644 (file)
index 0000000..a75b203
--- /dev/null
@@ -0,0 +1,166 @@
+/* MN10300 Userspace accessor functions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/uaccess.h>
+
+unsigned long
+__generic_copy_to_user(void *to, const void *from, unsigned long n)
+{
+       if (access_ok(VERIFY_WRITE, to, n))
+               __copy_user(to, from, n);
+       return n;
+}
+
+unsigned long
+__generic_copy_from_user(void *to, const void *from, unsigned long n)
+{
+       if (access_ok(VERIFY_READ, from, n))
+               __copy_user_zeroing(to, from, n);
+       return n;
+}
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+#define __do_strncpy_from_user(dst, src, count, res)           \
+do {                                                           \
+       int w;                                                  \
+       asm volatile(                                           \
+               "       mov     %1,%0\n"                        \
+               "       cmp     0,%1\n"                         \
+               "       beq     2f\n"                           \
+               "0:\n"                                          \
+               "       movbu   (%5),%2\n"                      \
+               "1:\n"                                          \
+               "       movbu   %2,(%6)\n"                      \
+               "       inc     %5\n"                           \
+               "       inc     %6\n"                           \
+               "       cmp     0,%2\n"                         \
+               "       beq     2f\n"                           \
+               "       add     -1,%1\n"                        \
+               "       bne     0b\n"                           \
+               "2:\n"                                          \
+               "       sub     %1,%0\n"                        \
+               "3:\n"                                          \
+               "       .section .fixup,\"ax\"\n"               \
+               "4:\n"                                          \
+               "       mov     %3,%0\n"                        \
+               "       jmp     3b\n"                           \
+               "       .previous\n"                            \
+               "       .section __ex_table,\"a\"\n"            \
+               "       .balign 4\n"                            \
+               "       .long 0b,4b\n"                          \
+               "       .long 1b,4b\n"                          \
+               "       .previous"                              \
+               :"=&r"(res), "=r"(count), "=&r"(w)              \
+               :"i"(-EFAULT), "1"(count), "a"(src), "a"(dst)   \
+               :"memory");                                     \
+} while (0)
+
+long
+__strncpy_from_user(char *dst, const char *src, long count)
+{
+       long res;
+       __do_strncpy_from_user(dst, src, count, res);
+       return res;
+}
+
+long
+strncpy_from_user(char *dst, const char *src, long count)
+{
+       long res = -EFAULT;
+       if (access_ok(VERIFY_READ, src, 1))
+               __do_strncpy_from_user(dst, src, count, res);
+       return res;
+}
+
+
+/*
+ * Clear a userspace memory
+ */
+#define __do_clear_user(addr, size)            \
+do {                                           \
+       int w;                                  \
+       asm volatile(                           \
+               "       cmp 0,%0\n"             \
+               "       beq 1f\n"               \
+               "       clr %1\n"               \
+               "0:     movbu %1,(%3,%2)\n"     \
+               "       inc %3\n"               \
+               "       cmp %0,%3\n"            \
+               "       bne 0b\n"               \
+               "1:\n"                          \
+               "       sub %3,%0\n"            \
+               "2:\n"                          \
+               ".section .fixup,\"ax\"\n"      \
+               "3:     jmp 2b\n"               \
+               ".previous\n"                   \
+               ".section __ex_table,\"a\"\n"   \
+               "       .balign 4\n"            \
+               "       .long 0b,3b\n"          \
+               ".previous\n"                   \
+               : "+r"(size), "=&r"(w)          \
+               : "a"(addr), "d"(0)             \
+               : "memory");                    \
+} while (0)
+
+unsigned long
+__clear_user(void *to, unsigned long n)
+{
+       __do_clear_user(to, n);
+       return n;
+}
+
+unsigned long
+clear_user(void *to, unsigned long n)
+{
+       if (access_ok(VERIFY_WRITE, to, n))
+               __do_clear_user(to, n);
+       return n;
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+long strnlen_user(const char *s, long n)
+{
+       unsigned long res, w;
+
+       if (!__addr_ok(s))
+               return 0;
+
+       if (n < 0 || n + (u_long) s > current_thread_info()->addr_limit.seg)
+               n = current_thread_info()->addr_limit.seg - (u_long)s;
+
+       asm volatile(
+               "0:     cmp %4,%0\n"
+               "       beq 2f\n"
+               "1:     movbu (%0,%3),%1\n"
+               "       inc %0\n"
+               "       cmp 0,%1\n"
+               "       beq 3f\n"
+               "       bra 0b\n"
+               "2:     clr %0\n"
+               "3:\n"
+               ".section .fixup,\"ax\"\n"
+               "4:     jmp 2b\n"
+               ".previous\n"
+               ".section __ex_table,\"a\"\n"
+               "       .balign 4\n"
+               "       .long 1b,4b\n"
+               ".previous\n"
+               :"=d"(res), "=&r"(w)
+               :"0"(0), "a"(s), "r"(n)
+               :"memory");
+       return res;
+}
diff --git a/arch/mn10300/mm/Makefile b/arch/mn10300/mm/Makefile
new file mode 100644 (file)
index 0000000..28b9d98
--- /dev/null
@@ -0,0 +1,14 @@
+#
+# Makefile for the MN10300-specific memory management code
+#
+
+obj-y := \
+       init.o fault.o pgtable.o extable.o tlb-mn10300.o mmu-context.o \
+       misalignment.o dma-alloc.o
+
+ifneq ($(CONFIG_MN10300_CACHE_DISABLED),y)
+obj-y  += cache.o cache-mn10300.o
+ifeq ($(CONFIG_MN10300_CACHE_WBACK),y)
+obj-y  += cache-flush-mn10300.o
+endif
+endif
diff --git a/arch/mn10300/mm/cache-flush-mn10300.S b/arch/mn10300/mm/cache-flush-mn10300.S
new file mode 100644 (file)
index 0000000..c8ed1cb
--- /dev/null
@@ -0,0 +1,192 @@
+/* MN10300 CPU core caching routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+
+       .am33_2
+       .globl mn10300_dcache_flush
+       .globl mn10300_dcache_flush_page
+       .globl mn10300_dcache_flush_range
+       .globl mn10300_dcache_flush_range2
+       .globl mn10300_dcache_flush_inv
+       .globl mn10300_dcache_flush_inv_page
+       .globl mn10300_dcache_flush_inv_range
+       .globl mn10300_dcache_flush_inv_range2
+
+###############################################################################
+#
+# void mn10300_dcache_flush(void)
+# Flush the entire data cache back to RAM
+#
+###############################################################################
+       ALIGN
+mn10300_dcache_flush:
+       movhu   (CHCTR),d0
+       btst    CHCTR_DCEN,d0
+       beq     mn10300_dcache_flush_end
+
+       # read the addresses tagged in the cache's tag RAM and attempt to flush
+       # those addresses specifically
+       # - we rely on the hardware to filter out invalid tag entry addresses
+       mov     DCACHE_TAG(0,0),a0              # dcache tag RAM access address
+       mov     DCACHE_PURGE(0,0),a1            # dcache purge request address
+       mov     L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1  # total number of entries
+
+mn10300_dcache_flush_loop:
+       mov     (a0),d0
+       and     L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+       or      L1_CACHE_TAG_VALID,d0           # retain valid entries in the
+                                               # cache
+       mov     d0,(a1)                         # conditional purge
+
+mn10300_dcache_flush_skip:
+       add     L1_CACHE_BYTES,a0
+       add     L1_CACHE_BYTES,a1
+       add     -1,d1
+       bne     mn10300_dcache_flush_loop
+
+mn10300_dcache_flush_end:
+       ret     [],0
+
+###############################################################################
+#
+# void mn10300_dcache_flush_page(unsigned start)
+# void mn10300_dcache_flush_range(unsigned start, unsigned end)
+# void mn10300_dcache_flush_range2(unsigned start, unsigned size)
+# Flush a range of addresses on a page in the dcache
+#
+###############################################################################
+       ALIGN
+mn10300_dcache_flush_page:
+       mov     PAGE_SIZE,d1
+mn10300_dcache_flush_range2:
+       add     d0,d1
+mn10300_dcache_flush_range:
+       movm    [d2,d3],(sp)
+
+       movhu   (CHCTR),d2
+       btst    CHCTR_DCEN,d2
+       beq     mn10300_dcache_flush_range_end
+
+       # round start addr down
+       and     L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+       mov     d0,a1
+
+       add     L1_CACHE_BYTES,d1                       # round end addr up
+       and     L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+
+       # write a request to flush all instances of an address from the cache
+       mov     DCACHE_PURGE(0,0),a0
+       mov     a1,d0
+       and     L1_CACHE_TAG_ENTRY,d0
+       add     d0,a0                           # starting dcache purge control
+                                               # reg address
+
+       sub     a1,d1
+       lsr     L1_CACHE_SHIFT,d1               # total number of entries to
+                                               # examine
+
+       or      L1_CACHE_TAG_VALID,a1           # retain valid entries in the
+                                               # cache
+
+mn10300_dcache_flush_range_loop:
+       mov     a1,(L1_CACHE_WAYDISP*0,a0)      # conditionally purge this line
+                                               # all ways
+
+       add     L1_CACHE_BYTES,a0
+       add     L1_CACHE_BYTES,a1
+       and     ~L1_CACHE_WAYDISP,a0            # make sure way stay on way 0
+       add     -1,d1
+       bne     mn10300_dcache_flush_range_loop
+
+mn10300_dcache_flush_range_end:
+       ret     [d2,d3],8
+
+###############################################################################
+#
+# void mn10300_dcache_flush_inv(void)
+# Flush the entire data cache and invalidate all entries
+#
+###############################################################################
+       ALIGN
+mn10300_dcache_flush_inv:
+       movhu   (CHCTR),d0
+       btst    CHCTR_DCEN,d0
+       beq     mn10300_dcache_flush_inv_end
+
+       # hit each line in the dcache with an unconditional purge
+       mov     DCACHE_PURGE(0,0),a1            # dcache purge request address
+       mov     L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1  # total number of entries
+
+mn10300_dcache_flush_inv_loop:
+       mov     (a1),d0                         # unconditional purge
+
+       add     L1_CACHE_BYTES,a1
+       add     -1,d1
+       bne     mn10300_dcache_flush_inv_loop
+
+mn10300_dcache_flush_inv_end:
+       ret     [],0
+
+###############################################################################
+#
+# void mn10300_dcache_flush_inv_page(unsigned start)
+# void mn10300_dcache_flush_inv_range(unsigned start, unsigned end)
+# void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size)
+# Flush and invalidate a range of addresses on a page in the dcache
+#
+###############################################################################
+       ALIGN
+mn10300_dcache_flush_inv_page:
+       mov     PAGE_SIZE,d1
+mn10300_dcache_flush_inv_range2:
+       add     d0,d1
+mn10300_dcache_flush_inv_range:
+       movm    [d2,d3],(sp)
+       movhu   (CHCTR),d2
+       btst    CHCTR_DCEN,d2
+       beq     mn10300_dcache_flush_inv_range_end
+
+       and     L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0      # round start
+                                                               # addr down
+       mov     d0,a1
+
+       add     L1_CACHE_BYTES,d1                       # round end addr up
+       and     L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+
+       # write a request to flush and invalidate all instances of an address
+       # from the cache
+       mov     DCACHE_PURGE(0,0),a0
+       mov     a1,d0
+       and     L1_CACHE_TAG_ENTRY,d0
+       add     d0,a0                           # starting dcache purge control
+                                               # reg address
+
+       sub     a1,d1
+       lsr     L1_CACHE_SHIFT,d1               # total number of entries to
+                                               # examine
+
+mn10300_dcache_flush_inv_range_loop:
+       mov     a1,(L1_CACHE_WAYDISP*0,a0)      # conditionally purge this line
+                                               # in all ways
+
+       add     L1_CACHE_BYTES,a0
+       add     L1_CACHE_BYTES,a1
+       and     ~L1_CACHE_WAYDISP,a0            # make sure way stay on way 0
+       add     -1,d1
+       bne     mn10300_dcache_flush_inv_range_loop
+
+mn10300_dcache_flush_inv_range_end:
+       ret     [d2,d3],8
diff --git a/arch/mn10300/mm/cache-mn10300.S b/arch/mn10300/mm/cache-mn10300.S
new file mode 100644 (file)
index 0000000..e839d0a
--- /dev/null
@@ -0,0 +1,289 @@
+/* MN10300 CPU core caching routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+
+#define mn10300_dcache_inv_range_intr_interval \
+       +((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1)
+
+#if mn10300_dcache_inv_range_intr_interval > 0xff
+#error MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL must be 8 or less
+#endif
+
+       .am33_2
+
+       .globl mn10300_icache_inv
+       .globl mn10300_dcache_inv
+       .globl mn10300_dcache_inv_range
+       .globl mn10300_dcache_inv_range2
+       .globl mn10300_dcache_inv_page
+
+###############################################################################
+#
+# void mn10300_icache_inv(void)
+# Invalidate the entire icache
+#
+###############################################################################
+       ALIGN
+mn10300_icache_inv:
+       mov     CHCTR,a0
+
+       movhu   (a0),d0
+       btst    CHCTR_ICEN,d0
+       beq     mn10300_icache_inv_end
+
+       mov     epsw,d1
+       and     ~EPSW_IE,epsw
+       nop
+       nop
+
+       # disable the icache
+       and     ~CHCTR_ICEN,d0
+       movhu   d0,(a0)
+
+       # and wait for it to calm down
+       setlb
+       movhu   (a0),d0
+       btst    CHCTR_ICBUSY,d0
+       lne
+
+       # invalidate
+       or      CHCTR_ICINV,d0
+       movhu   d0,(a0)
+
+       # wait for the cache to finish
+       mov     CHCTR,a0
+       setlb
+       movhu   (a0),d0
+       btst    CHCTR_ICBUSY,d0
+       lne
+
+       # and reenable it
+       and     ~CHCTR_ICINV,d0
+       or      CHCTR_ICEN,d0
+       movhu   d0,(a0)
+       movhu   (a0),d0
+
+       mov     d1,epsw
+
+mn10300_icache_inv_end:
+       ret     [],0
+
+###############################################################################
+#
+# void mn10300_dcache_inv(void)
+# Invalidate the entire dcache
+#
+###############################################################################
+       ALIGN
+mn10300_dcache_inv:
+       mov     CHCTR,a0
+
+       movhu   (a0),d0
+       btst    CHCTR_DCEN,d0
+       beq     mn10300_dcache_inv_end
+
+       mov     epsw,d1
+       and     ~EPSW_IE,epsw
+       nop
+       nop
+
+       # disable the dcache
+       and     ~CHCTR_DCEN,d0
+       movhu   d0,(a0)
+
+       # and wait for it to calm down
+       setlb
+       movhu   (a0),d0
+       btst    CHCTR_DCBUSY,d0
+       lne
+
+       # invalidate
+       or      CHCTR_DCINV,d0
+       movhu   d0,(a0)
+
+       # wait for the cache to finish
+       mov     CHCTR,a0
+       setlb
+       movhu   (a0),d0
+       btst    CHCTR_DCBUSY,d0
+       lne
+
+       # and reenable it
+       and     ~CHCTR_DCINV,d0
+       or      CHCTR_DCEN,d0
+       movhu   d0,(a0)
+       movhu   (a0),d0
+
+       mov     d1,epsw
+
+mn10300_dcache_inv_end:
+       ret     [],0
+
+###############################################################################
+#
+# void mn10300_dcache_inv_range(unsigned start, unsigned end)
+# void mn10300_dcache_inv_range2(unsigned start, unsigned size)
+# void mn10300_dcache_inv_page(unsigned start)
+# Invalidate a range of addresses on a page in the dcache
+#
+###############################################################################
+       ALIGN
+mn10300_dcache_inv_page:
+       mov     PAGE_SIZE,d1
+mn10300_dcache_inv_range2:
+       add     d0,d1
+mn10300_dcache_inv_range:
+       movm    [d2,d3,a2],(sp)
+       mov     CHCTR,a2
+
+       movhu   (a2),d2
+       btst    CHCTR_DCEN,d2
+       beq     mn10300_dcache_inv_range_end
+
+       and     L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0      # round start
+                                                               # addr down
+       mov     d0,a1
+
+       add     L1_CACHE_BYTES,d1                       # round end addr up
+       and     L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+
+       clr     d2                              # we're going to clear tag ram
+                                               # entries
+
+       # read the tags from the tag RAM, and if they indicate a valid dirty
+       # cache line then invalidate that line
+       mov     DCACHE_TAG(0,0),a0
+       mov     a1,d0
+       and     L1_CACHE_TAG_ENTRY,d0
+       add     d0,a0                           # starting dcache tag RAM
+                                               # access address
+
+       sub     a1,d1
+       lsr     L1_CACHE_SHIFT,d1               # total number of entries to
+                                               # examine
+
+       and     ~(L1_CACHE_DISPARITY-1),a1      # determine comparator base
+
+mn10300_dcache_inv_range_outer_loop:
+       # disable interrupts
+       mov     epsw,d3
+       and     ~EPSW_IE,epsw
+       nop                                     # note that reading CHCTR and
+                                               # AND'ing D0 occupy two delay
+                                               # slots after disabling
+                                               # interrupts
+
+       # disable the dcache
+       movhu   (a2),d0
+       and     ~CHCTR_DCEN,d0
+       movhu   d0,(a2)
+
+       # and wait for it to calm down
+       setlb
+       movhu   (a2),d0
+       btst    CHCTR_DCBUSY,d0
+       lne
+
+mn10300_dcache_inv_range_loop:
+
+       # process the way 0 slot
+       mov     (L1_CACHE_WAYDISP*0,a0),d0      # read the tag in the way 0 slot
+       btst    L1_CACHE_TAG_VALID,d0
+       beq     mn10300_dcache_inv_range_skip_0 # jump if this cacheline is not
+                                               # valid
+
+       xor     a1,d0
+       lsr     12,d0
+       bne     mn10300_dcache_inv_range_skip_0 # jump if not this cacheline
+
+       mov     d2,(a0)                         # kill the tag
+
+mn10300_dcache_inv_range_skip_0:
+
+       # process the way 1 slot
+       mov     (L1_CACHE_WAYDISP*1,a0),d0      # read the tag in the way 1 slot
+       btst    L1_CACHE_TAG_VALID,d0
+       beq     mn10300_dcache_inv_range_skip_1 # jump if this cacheline is not
+                                               # valid
+
+       xor     a1,d0
+       lsr     12,d0
+       bne     mn10300_dcache_inv_range_skip_1 # jump if not this cacheline
+
+       mov     d2,(a0)                         # kill the tag
+
+mn10300_dcache_inv_range_skip_1:
+
+       # process the way 2 slot
+       mov     (L1_CACHE_WAYDISP*2,a0),d0      # read the tag in the way 2 slot
+       btst    L1_CACHE_TAG_VALID,d0
+       beq     mn10300_dcache_inv_range_skip_2 # jump if this cacheline is not
+                                               # valid
+
+       xor     a1,d0
+       lsr     12,d0
+       bne     mn10300_dcache_inv_range_skip_2 # jump if not this cacheline
+
+       mov     d2,(a0)                         # kill the tag
+
+mn10300_dcache_inv_range_skip_2:
+
+       # process the way 3 slot
+       mov     (L1_CACHE_WAYDISP*3,a0),d0      # read the tag in the way 3 slot
+       btst    L1_CACHE_TAG_VALID,d0
+       beq     mn10300_dcache_inv_range_skip_3 # jump if this cacheline is not
+                                               # valid
+
+       xor     a1,d0
+       lsr     12,d0
+       bne     mn10300_dcache_inv_range_skip_3 # jump if not this cacheline
+
+       mov     d2,(a0)                         # kill the tag
+
+mn10300_dcache_inv_range_skip_3:
+
+       # approx every N steps we re-enable the cache and see if there are any
+       # interrupts to be processed
+       # we also break out if we've reached the end of the loop
+       # (the bottom nibble of the count is zero in both cases)
+       add     L1_CACHE_BYTES,a0
+       add     L1_CACHE_BYTES,a1
+       add     -1,d1
+       btst    mn10300_dcache_inv_range_intr_interval,d1
+       bne     mn10300_dcache_inv_range_loop
+
+       # wait for the cache to finish what it's doing
+       setlb
+       movhu   (a2),d0
+       btst    CHCTR_DCBUSY,d0
+       lne
+
+       # and reenable it
+       or      CHCTR_DCEN,d0
+       movhu   d0,(a2)
+       movhu   (a2),d0
+
+       # re-enable interrupts
+       # - we don't bother with delay NOPs as we'll have enough instructions
+       #   before we disable interrupts again to give the interrupts a chance
+       #   to happen
+       mov     d3,epsw
+
+       # go around again if the counter hasn't yet reached zero
+       add     0,d1
+       bne     mn10300_dcache_inv_range_outer_loop
+
+mn10300_dcache_inv_range_end:
+       ret     [d2,d3,a2],12
diff --git a/arch/mn10300/mm/cache.c b/arch/mn10300/mm/cache.c
new file mode 100644 (file)
index 0000000..1b76719
--- /dev/null
@@ -0,0 +1,121 @@
+/* MN10300 Cache flushing routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/threads.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+EXPORT_SYMBOL(mn10300_icache_inv);
+EXPORT_SYMBOL(mn10300_dcache_inv);
+EXPORT_SYMBOL(mn10300_dcache_inv_range);
+EXPORT_SYMBOL(mn10300_dcache_inv_range2);
+EXPORT_SYMBOL(mn10300_dcache_inv_page);
+
+#ifdef CONFIG_MN10300_CACHE_WBACK
+EXPORT_SYMBOL(mn10300_dcache_flush);
+EXPORT_SYMBOL(mn10300_dcache_flush_inv);
+EXPORT_SYMBOL(mn10300_dcache_flush_inv_range);
+EXPORT_SYMBOL(mn10300_dcache_flush_inv_range2);
+EXPORT_SYMBOL(mn10300_dcache_flush_inv_page);
+EXPORT_SYMBOL(mn10300_dcache_flush_range);
+EXPORT_SYMBOL(mn10300_dcache_flush_range2);
+EXPORT_SYMBOL(mn10300_dcache_flush_page);
+#endif
+
+/*
+ * write a page back from the dcache and invalidate the icache so that we can
+ * run code from it that we've just written into it
+ */
+void flush_icache_page(struct vm_area_struct *vma, struct page *page)
+{
+       mn10300_dcache_flush_page(page_to_phys(page));
+       mn10300_icache_inv();
+}
+EXPORT_SYMBOL(flush_icache_page);
+
+/*
+ * write some code we've just written back from the dcache and invalidate the
+ * icache so that we can run that code
+ */
+void flush_icache_range(unsigned long start, unsigned long end)
+{
+#ifdef CONFIG_MN10300_CACHE_WBACK
+       unsigned long addr, size, off;
+       struct page *page;
+       pgd_t *pgd;
+       pud_t *pud;
+       pmd_t *pmd;
+       pte_t *ppte, pte;
+
+       for (; start < end; start += size) {
+               /* work out how much of the page to flush */
+               off = start & (PAGE_SIZE - 1);
+
+               size = end - start;
+               if (size > PAGE_SIZE - off)
+                       size = PAGE_SIZE - off;
+
+               /* get the physical address the page is mapped to from the page
+                * tables */
+               pgd = pgd_offset(current->mm, start);
+               if (!pgd || !pgd_val(*pgd))
+                       continue;
+
+               pud = pud_offset(pgd, start);
+               if (!pud || !pud_val(*pud))
+                       continue;
+
+               pmd = pmd_offset(pud, start);
+               if (!pmd || !pmd_val(*pmd))
+                       continue;
+
+               ppte = pte_offset_map(pmd, start);
+               if (!ppte)
+                       continue;
+               pte = *ppte;
+               pte_unmap(ppte);
+
+               if (pte_none(pte))
+                       continue;
+
+               page = pte_page(pte);
+               if (!page)
+                       continue;
+
+               addr = page_to_phys(page);
+
+               /* flush the dcache and invalidate the icache coverage on that
+                * region */
+               mn10300_dcache_flush_range2(addr + off, size);
+       }
+#endif
+
+       mn10300_icache_inv();
+}
+EXPORT_SYMBOL(flush_icache_range);
+
+/*
+ * allow userspace to flush the instruction cache
+ */
+asmlinkage long sys_cacheflush(unsigned long start, unsigned long end)
+{
+       if (end < start)
+               return -EINVAL;
+
+       flush_icache_range(start, end);
+       return 0;
+}
diff --git a/arch/mn10300/mm/dma-alloc.c b/arch/mn10300/mm/dma-alloc.c
new file mode 100644 (file)
index 0000000..f3649d8
--- /dev/null
@@ -0,0 +1,56 @@
+/* MN10300 Dynamic DMA mapping support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from: arch/i386/kernel/pci-dma.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+                        dma_addr_t *dma_handle, int gfp)
+{
+       unsigned long addr;
+       void *ret;
+
+       /* ignore region specifiers */
+       gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+
+       if (dev == NULL || dev->coherent_dma_mask < 0xffffffff)
+               gfp |= GFP_DMA;
+
+       addr = __get_free_pages(gfp, get_order(size));
+       if (!addr)
+               return NULL;
+
+       /* map the coherent memory through the uncached memory window */
+       ret = (void *) (addr | 0x20000000);
+
+       /* fill the memory with obvious rubbish */
+       memset((void *) addr, 0xfb, size);
+
+       /* write back and evict all cache lines covering this region */
+       mn10300_dcache_flush_inv_range2(virt_to_phys((void *) addr), PAGE_SIZE);
+
+       *dma_handle = virt_to_bus((void *) addr);
+       return ret;
+}
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
+                      dma_addr_t dma_handle)
+{
+       unsigned long addr = (unsigned long) vaddr & ~0x20000000;
+
+       free_pages(addr, get_order(size));
+}
+EXPORT_SYMBOL(dma_free_coherent);
diff --git a/arch/mn10300/mm/extable.c b/arch/mn10300/mm/extable.c
new file mode 100644 (file)
index 0000000..25e5485
--- /dev/null
@@ -0,0 +1,26 @@
+/* MN10300 In-kernel exception handling
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/uaccess.h>
+
+int fixup_exception(struct pt_regs *regs)
+{
+       const struct exception_table_entry *fixup;
+
+       fixup = search_exception_tables(regs->pc);
+       if (fixup) {
+               regs->pc = fixup->fixup;
+               return 1;
+       }
+
+       return 0;
+}
diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
new file mode 100644 (file)
index 0000000..78f092c
--- /dev/null
@@ -0,0 +1,405 @@
+/* MN10300 MMU Fault handler
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/vt_kern.h>             /* For unblank_screen() */
+
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/pgalloc.h>
+#include <asm/hardirq.h>
+#include <asm/gdb-stub.h>
+#include <asm/cpu-regs.h>
+
+/*
+ * Unlock any spinlocks which will prevent us from getting the
+ * message out
+ */
+void bust_spinlocks(int yes)
+{
+       if (yes) {
+               oops_in_progress = 1;
+#ifdef CONFIG_SMP
+               /* Many serial drivers do __global_cli() */
+               global_irq_lock = 0;
+#endif
+       } else {
+               int loglevel_save = console_loglevel;
+#ifdef CONFIG_VT
+               unblank_screen();
+#endif
+               oops_in_progress = 0;
+               /*
+                * OK, the message is on the console.  Now we call printk()
+                * without oops_in_progress set so that printk will give klogd
+                * a poke.  Hold onto your hats...
+                */
+               console_loglevel = 15;  /* NMI oopser may have shut the console
+                                        * up */
+               printk(" ");
+               console_loglevel = loglevel_save;
+       }
+}
+
+void do_BUG(const char *file, int line)
+{
+       bust_spinlocks(1);
+       printk(KERN_EMERG "------------[ cut here ]------------\n");
+       printk(KERN_EMERG "kernel BUG at %s:%d!\n", file, line);
+}
+
+#if 0
+static void print_pagetable_entries(pgd_t *pgdir, unsigned long address)
+{
+       pgd_t *pgd;
+       pmd_t *pmd;
+       pte_t *pte;
+
+       pgd = pgdir + __pgd_offset(address);
+       printk(KERN_DEBUG "pgd entry %p: %016Lx\n",
+              pgd, (long long) pgd_val(*pgd));
+
+       if (!pgd_present(*pgd)) {
+               printk(KERN_DEBUG "... pgd not present!\n");
+               return;
+       }
+       pmd = pmd_offset(pgd, address);
+       printk(KERN_DEBUG "pmd entry %p: %016Lx\n",
+              pmd, (long long)pmd_val(*pmd));
+
+       if (!pmd_present(*pmd)) {
+               printk(KERN_DEBUG "... pmd not present!\n");
+               return;
+       }
+       pte = pte_offset(pmd, address);
+       printk(KERN_DEBUG "pte entry %p: %016Lx\n",
+              pte, (long long) pte_val(*pte));
+
+       if (!pte_present(*pte))
+               printk(KERN_DEBUG "... pte not present!\n");
+}
+#endif
+
+asmlinkage void monitor_signal(struct pt_regs *);
+
+/*
+ * This routine handles page faults.  It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ *
+ * fault_code:
+ * - LSW: either MMUFCR_IFC or MMUFCR_DFC as appropriate
+ * - MSW: 0 if data access, 1 if instruction access
+ * - bit 0: TLB miss flag
+ * - bit 1: initial write
+ * - bit 2: page invalid
+ * - bit 3: protection violation
+ * - bit 4: accessor (0=user 1=kernel)
+ * - bit 5: 0=read 1=write
+ * - bit 6-8: page protection spec
+ * - bit 9: illegal address
+ * - bit 16: 0=data 1=ins
+ *
+ */
+asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long fault_code,
+                             unsigned long address)
+{
+       struct vm_area_struct *vma;
+       struct task_struct *tsk;
+       struct mm_struct *mm;
+       unsigned long page;
+       siginfo_t info;
+       int write, fault;
+
+#ifdef CONFIG_GDBSTUB
+       /* handle GDB stub causing a fault */
+       if (gdbstub_busy) {
+               gdbstub_exception(regs, TBR & TBR_INT_CODE);
+               return;
+       }
+#endif
+
+#if 0
+       printk(KERN_DEBUG "--- do_page_fault(%p,%s:%04lx,%08lx)\n",
+              regs,
+              fault_code & 0x10000 ? "ins" : "data",
+              fault_code & 0xffff, address);
+#endif
+
+       tsk = current;
+
+       /*
+        * We fault-in kernel-space virtual memory on-demand. The
+        * 'reference' page table is init_mm.pgd.
+        *
+        * NOTE! We MUST NOT take any locks for this case. We may
+        * be in an interrupt or a critical region, and should
+        * only copy the information from the master page table,
+        * nothing more.
+        *
+        * This verifies that the fault happens in kernel space
+        * and that the fault was a page not present (invalid) error
+        */
+       if (address >= VMALLOC_START && address < VMALLOC_END &&
+           (fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR &&
+           (fault_code & MMUFCR_xFC_PGINVAL) == MMUFCR_xFC_PGINVAL
+           )
+               goto vmalloc_fault;
+
+       mm = tsk->mm;
+       info.si_code = SEGV_MAPERR;
+
+       /*
+        * If we're in an interrupt or have no user
+        * context, we must not take the fault..
+        */
+       if (in_interrupt() || !mm)
+               goto no_context;
+
+       down_read(&mm->mmap_sem);
+
+       vma = find_vma(mm, address);
+       if (!vma)
+               goto bad_area;
+       if (vma->vm_start <= address)
+               goto good_area;
+       if (!(vma->vm_flags & VM_GROWSDOWN))
+               goto bad_area;
+
+       if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) {
+               /* accessing the stack below the stack pointer is always a
+                * bug */
+               if ((address & PAGE_MASK) + 2 * PAGE_SIZE < regs->sp) {
+#if 0
+                       printk(KERN_WARNING
+                              "[%d] ### Access below stack @%lx (sp=%lx)\n",
+                              current->pid, address, regs->sp);
+                       printk(KERN_WARNING
+                              "vma [%08x - %08x]\n",
+                              vma->vm_start, vma->vm_end);
+                       show_registers(regs);
+                       printk(KERN_WARNING
+                              "[%d] ### Code: [%08lx]"
+                              " %02x %02x %02x %02x %02x %02x %02x %02x\n",
+                              current->pid,
+                              regs->pc,
+                              ((u8 *) regs->pc)[0],
+                              ((u8 *) regs->pc)[1],
+                              ((u8 *) regs->pc)[2],
+                              ((u8 *) regs->pc)[3],
+                              ((u8 *) regs->pc)[4],
+                              ((u8 *) regs->pc)[5],
+                              ((u8 *) regs->pc)[6],
+                              ((u8 *) regs->pc)[7]
+                              );
+#endif
+                       goto bad_area;
+               }
+       }
+
+       if (expand_stack(vma, address))
+               goto bad_area;
+
+/*
+ * Ok, we have a good vm_area for this memory access, so
+ * we can handle it..
+ */
+good_area:
+       info.si_code = SEGV_ACCERR;
+       write = 0;
+       switch (fault_code & (MMUFCR_xFC_PGINVAL|MMUFCR_xFC_TYPE)) {
+       default:        /* 3: write, present */
+       case MMUFCR_xFC_TYPE_WRITE:
+#ifdef TEST_VERIFY_AREA
+               if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR)
+                       printk(KERN_DEBUG "WP fault at %08lx\n", regs->pc);
+#endif
+               /* write to absent page */
+       case MMUFCR_xFC_PGINVAL | MMUFCR_xFC_TYPE_WRITE:
+               if (!(vma->vm_flags & VM_WRITE))
+                       goto bad_area;
+               write++;
+               break;
+
+               /* read from protected page */
+       case MMUFCR_xFC_TYPE_READ:
+               goto bad_area;
+
+               /* read from absent page present */
+       case MMUFCR_xFC_PGINVAL | MMUFCR_xFC_TYPE_READ:
+               if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+                       goto bad_area;
+               break;
+       }
+
+       /*
+        * If for any reason at all we couldn't handle the fault,
+        * make sure we exit gracefully rather than endlessly redo
+        * the fault.
+        */
+       fault = handle_mm_fault(mm, vma, address, write);
+       if (unlikely(fault & VM_FAULT_ERROR)) {
+               if (fault & VM_FAULT_OOM)
+                       goto out_of_memory;
+               else if (fault & VM_FAULT_SIGBUS)
+                       goto do_sigbus;
+               BUG();
+       }
+       if (fault & VM_FAULT_MAJOR)
+               current->maj_flt++;
+       else
+               current->min_flt++;
+
+       up_read(&mm->mmap_sem);
+       return;
+
+/*
+ * Something tried to access memory that isn't in our memory map..
+ * Fix it, but check if it's kernel or user first..
+ */
+bad_area:
+       up_read(&mm->mmap_sem);
+       monitor_signal(regs);
+
+       /* User mode accesses just cause a SIGSEGV */
+       if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) {
+               info.si_signo = SIGSEGV;
+               info.si_errno = 0;
+               /* info.si_code has been set above */
+               info.si_addr = (void *)address;
+               force_sig_info(SIGSEGV, &info, tsk);
+               return;
+       }
+
+no_context:
+       monitor_signal(regs);
+       /* Are we prepared to handle this kernel fault?  */
+       if (fixup_exception(regs))
+               return;
+
+/*
+ * Oops. The kernel tried to access some bad page. We'll have to
+ * terminate things with extreme prejudice.
+ */
+
+       bust_spinlocks(1);
+
+       if (address < PAGE_SIZE)
+               printk(KERN_ALERT
+                      "Unable to handle kernel NULL pointer dereference");
+       else
+               printk(KERN_ALERT
+                      "Unable to handle kernel paging request");
+       printk(" at virtual address %08lx\n", address);
+       printk(" printing pc:\n");
+       printk(KERN_ALERT "%08lx\n", regs->pc);
+
+#ifdef CONFIG_GDBSTUB
+       gdbstub_intercept(
+               regs, fault_code & 0x00010000 ? EXCEP_IAERROR : EXCEP_DAERROR);
+#endif
+
+       page = PTBR;
+       page = ((unsigned long *) __va(page))[address >> 22];
+       printk(KERN_ALERT "*pde = %08lx\n", page);
+       if (page & 1) {
+               page &= PAGE_MASK;
+               address &= 0x003ff000;
+               page = ((unsigned long *) __va(page))[address >> PAGE_SHIFT];
+               printk(KERN_ALERT "*pte = %08lx\n", page);
+       }
+
+       die("Oops", regs, fault_code);
+       do_exit(SIGKILL);
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+       up_read(&mm->mmap_sem);
+       monitor_signal(regs);
+       printk(KERN_ALERT "VM: killing process %s\n", tsk->comm);
+       if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR)
+               do_exit(SIGKILL);
+       goto no_context;
+
+do_sigbus:
+       up_read(&mm->mmap_sem);
+       monitor_signal(regs);
+
+       /*
+        * Send a sigbus, regardless of whether we were in kernel
+        * or user mode.
+        */
+       info.si_signo = SIGBUS;
+       info.si_errno = 0;
+       info.si_code = BUS_ADRERR;
+       info.si_addr = (void *)address;
+       force_sig_info(SIGBUS, &info, tsk);
+
+       /* Kernel mode? Handle exceptions or die */
+       if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR)
+               goto no_context;
+       return;
+
+vmalloc_fault:
+       {
+               /*
+                * Synchronize this task's top level page-table
+                * with the 'reference' page table.
+                *
+                * Do _not_ use "tsk" here. We might be inside
+                * an interrupt in the middle of a task switch..
+                */
+               int index = pgd_index(address);
+               pgd_t *pgd, *pgd_k;
+               pud_t *pud, *pud_k;
+               pmd_t *pmd, *pmd_k;
+               pte_t *pte_k;
+
+               pgd_k = init_mm.pgd + index;
+
+               if (!pgd_present(*pgd_k))
+                       goto no_context;
+
+               pud_k = pud_offset(pgd_k, address);
+               if (!pud_present(*pud_k))
+                       goto no_context;
+
+               pmd_k = pmd_offset(pud_k, address);
+               if (!pmd_present(*pmd_k))
+                       goto no_context;
+
+               pgd = (pgd_t *) PTBR + index;
+               pud = pud_offset(pgd, address);
+               pmd = pmd_offset(pud, address);
+               set_pmd(pmd, *pmd_k);
+
+               pte_k = pte_offset_kernel(pmd_k, address);
+               if (!pte_present(*pte_k))
+                       goto no_context;
+               return;
+       }
+}
diff --git a/arch/mn10300/mm/init.c b/arch/mn10300/mm/init.c
new file mode 100644 (file)
index 0000000..8c5d88c
--- /dev/null
@@ -0,0 +1,160 @@
+/* MN10300 Memory management initialisation
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/initrd.h>
+#include <linux/highmem.h>
+#include <linux/pagemap.h>
+#include <linux/bootmem.h>
+
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/dma.h>
+#include <asm/tlb.h>
+#include <asm/sections.h>
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+unsigned long highstart_pfn, highend_pfn;
+
+/*
+ * set up paging
+ */
+void __init paging_init(void)
+{
+       unsigned long zones_size[MAX_NR_ZONES] = {0,};
+       pte_t *ppte;
+       int loop;
+
+       /* main kernel space -> RAM mapping is handled as 1:1 transparent by
+        * the MMU */
+       memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
+       memset(kernel_vmalloc_ptes, 0, sizeof(kernel_vmalloc_ptes));
+
+       /* load the VMALLOC area PTE table addresses into the kernel PGD */
+       ppte = kernel_vmalloc_ptes;
+       for (loop = VMALLOC_START / (PAGE_SIZE * PTRS_PER_PTE);
+            loop < VMALLOC_END / (PAGE_SIZE * PTRS_PER_PTE);
+            loop++
+            ) {
+               set_pgd(swapper_pg_dir + loop, __pgd(__pa(ppte) | _PAGE_TABLE));
+               ppte += PAGE_SIZE / sizeof(pte_t);
+       }
+
+       /* declare the sizes of the RAM zones (only use the normal zone) */
+       zones_size[ZONE_NORMAL] =
+               (contig_page_data.bdata->node_low_pfn) -
+               (contig_page_data.bdata->node_boot_start >> PAGE_SHIFT);
+
+       /* pass the memory from the bootmem allocator to the main allocator */
+       free_area_init(zones_size);
+
+       __flush_tlb_all();
+}
+
+/*
+ * transfer all the memory from the bootmem allocator to the runtime allocator
+ */
+void __init mem_init(void)
+{
+       int codesize, reservedpages, datasize, initsize;
+       int tmp;
+
+       if (!mem_map)
+               BUG();
+
+#define START_PFN      (contig_page_data.bdata->node_boot_start >> PAGE_SHIFT)
+#define MAX_LOW_PFN    (contig_page_data.bdata->node_low_pfn)
+
+       max_mapnr = num_physpages = MAX_LOW_PFN - START_PFN;
+       high_memory = (void *) __va(MAX_LOW_PFN * PAGE_SIZE);
+
+       /* clear the zero-page */
+       memset(empty_zero_page, 0, PAGE_SIZE);
+
+       /* this will put all low memory onto the freelists */
+       totalram_pages += free_all_bootmem();
+
+       reservedpages = 0;
+       for (tmp = 0; tmp < num_physpages; tmp++)
+               if (PageReserved(&mem_map[tmp]))
+                       reservedpages++;
+
+       codesize =  (unsigned long) &_etext - (unsigned long) &_stext;
+       datasize =  (unsigned long) &_edata - (unsigned long) &_etext;
+       initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
+
+       printk(KERN_INFO
+              "Memory: %luk/%luk available"
+              " (%dk kernel code, %dk reserved, %dk data, %dk init,"
+              " %ldk highmem)\n",
+              (unsigned long) nr_free_pages() << (PAGE_SHIFT - 10),
+              max_mapnr << (PAGE_SHIFT - 10),
+              codesize >> 10,
+              reservedpages << (PAGE_SHIFT - 10),
+              datasize >> 10,
+              initsize >> 10,
+              (unsigned long) (totalhigh_pages << (PAGE_SHIFT - 10))
+              );
+}
+
+/*
+ *
+ */
+void free_init_pages(char *what, unsigned long begin, unsigned long end)
+{
+       unsigned long addr;
+
+       for (addr = begin; addr < end; addr += PAGE_SIZE) {
+               ClearPageReserved(virt_to_page(addr));
+               init_page_count(virt_to_page(addr));
+               memset((void *) addr, 0xcc, PAGE_SIZE);
+               free_page(addr);
+               totalram_pages++;
+       }
+       printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10);
+}
+
+/*
+ * recycle memory containing stuff only required for initialisation
+ */
+void free_initmem(void)
+{
+       free_init_pages("unused kernel memory",
+                       (unsigned long) &__init_begin,
+                       (unsigned long) &__init_end);
+}
+
+/*
+ * dispose of the memory on which the initial ramdisk resided
+ */
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+       free_init_pages("initrd memory", start, end);
+}
+#endif
diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c
new file mode 100644 (file)
index 0000000..32aa89d
--- /dev/null
@@ -0,0 +1,661 @@
+/* MN10300 Misalignment fixup handler
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include <asm/smp.h>
+#include <asm/pgalloc.h>
+#include <asm/cpu-regs.h>
+#include <asm/busctl-regs.h>
+#include <asm/fpu.h>
+#include <asm/gdb-stub.h>
+#include <asm/asm-offsets.h>
+
+#if 0
+#define kdebug(FMT, ...) printk(KERN_DEBUG FMT, ##__VA_ARGS__)
+#else
+#define kdebug(FMT, ...) do {} while (0)
+#endif
+
+static int misalignment_addr(unsigned long *registers, unsigned params,
+                            unsigned opcode, unsigned disp,
+                            void **_address, unsigned long **_postinc);
+
+static int misalignment_reg(unsigned long *registers, unsigned params,
+                           unsigned opcode, unsigned disp,
+                           unsigned long **_register);
+
+static inline unsigned int_log2(unsigned x)
+{
+       unsigned y;
+       asm("bsch %1,%0" : "=r"(y) : "r"(x), "0"(0));
+       return y;
+}
+#define log2(x) int_log2(x)
+
+static const unsigned Dreg_index[] = {
+       REG_D0 >> 2, REG_D1 >> 2, REG_D2 >> 2, REG_D3 >> 2
+};
+
+static const unsigned Areg_index[] = {
+       REG_A0 >> 2, REG_A1 >> 2, REG_A2 >> 2, REG_A3 >> 2
+};
+
+static const unsigned Rreg_index[] = {
+       REG_E0 >> 2, REG_E1 >> 2, REG_E2 >> 2, REG_E3 >> 2,
+       REG_E4 >> 2, REG_E5 >> 2, REG_E6 >> 2, REG_E7 >> 2,
+       REG_A0 >> 2, REG_A1 >> 2, REG_A2 >> 2, REG_A3 >> 2,
+       REG_D0 >> 2, REG_D1 >> 2, REG_D2 >> 2, REG_D3 >> 2
+};
+
+enum format_id {
+       FMT_S0,
+       FMT_S1,
+       FMT_S2,
+       FMT_S4,
+       FMT_D0,
+       FMT_D1,
+       FMT_D2,
+       FMT_D4,
+       FMT_D6,
+       FMT_D7,
+       FMT_D8,
+       FMT_D9,
+};
+
+struct {
+       u_int8_t opsz, dispsz;
+} format_tbl[16] = {
+       [FMT_S0]        = { 8,  0       },
+       [FMT_S1]        = { 8,  8       },
+       [FMT_S2]        = { 8,  16      },
+       [FMT_S4]        = { 8,  32      },
+       [FMT_D0]        = { 16, 0       },
+       [FMT_D1]        = { 16, 8       },
+       [FMT_D2]        = { 16, 16      },
+       [FMT_D4]        = { 16, 32      },
+       [FMT_D6]        = { 24, 0       },
+       [FMT_D7]        = { 24, 8       },
+       [FMT_D8]        = { 24, 24      },
+       [FMT_D9]        = { 24, 32      },
+};
+
+enum value_id {
+       DM0,            /* data reg in opcode in bits 0-1 */
+       DM1,            /* data reg in opcode in bits 2-3 */
+       DM2,            /* data reg in opcode in bits 4-5 */
+       AM0,            /* addr reg in opcode in bits 0-1 */
+       AM1,            /* addr reg in opcode in bits 2-3 */
+       AM2,            /* addr reg in opcode in bits 4-5 */
+       RM0,            /* reg in opcode in bits 0-3 */
+       RM1,            /* reg in opcode in bits 2-5 */
+       RM2,            /* reg in opcode in bits 4-7 */
+       RM4,            /* reg in opcode in bits 8-11 */
+       RM6,            /* reg in opcode in bits 12-15 */
+
+       RD0,            /* reg in displacement in bits 0-3 */
+       RD2,            /* reg in displacement in bits 4-7 */
+
+       SP,             /* stack pointer */
+
+       SD8,            /* 8-bit signed displacement */
+       SD16,           /* 16-bit signed displacement */
+       SD24,           /* 24-bit signed displacement */
+       SIMM4_2,        /* 4-bit signed displacement in opcode bits 4-7 */
+       SIMM8,          /* 8-bit signed immediate */
+       IMM24,          /* 24-bit unsigned immediate */
+       IMM32,          /* 32-bit unsigned immediate */
+       IMM32_HIGH8,    /* 32-bit unsigned immediate, high 8-bits in opcode */
+
+       DN0     = DM0,
+       DN1     = DM1,
+       DN2     = DM2,
+       AN0     = AM0,
+       AN1     = AM1,
+       AN2     = AM2,
+       RN0     = RM0,
+       RN1     = RM1,
+       RN2     = RM2,
+       RN4     = RM4,
+       RN6     = RM6,
+       DI      = DM1,
+       RI      = RM2,
+
+};
+
+struct mn10300_opcode {
+       const char      *name;
+       u_int32_t       opcode;
+       u_int32_t       opmask;
+       unsigned        exclusion;
+
+       enum format_id  format;
+
+       unsigned        cpu_mask;
+#define AM33   330
+
+       unsigned        params[2];
+#define MEM(ADDR)              (0x80000000 | (ADDR))
+#define MEM2(ADDR1, ADDR2)     (0x80000000 | (ADDR1) << 8 | (ADDR2))
+#define MEMINC(ADDR)           (0x81000000 | (ADDR))
+#define MEMINC2(ADDR, INC)     (0x81000000 | (ADDR) << 8 | (INC))
+};
+
+/* LIBOPCODES EXCERPT
+   Assemble Matsushita MN10300 instructions.
+   Copyright 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public Licence as published by
+   the Free Software Foundation; either version 2 of the Licence, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public Licence for more details.
+
+   You should have received a copy of the GNU General Public Licence
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+static const struct mn10300_opcode mn10300_opcodes[] = {
+{ "mov",       0x60,        0xf0,        0,    FMT_S0, 0,      {DM1, MEM(AN0)}},
+{ "mov",       0x70,        0xf0,        0,    FMT_S0, 0,      {MEM(AM0), DN1}},
+{ "mov",       0xf000,      0xfff0,      0,    FMT_D0, 0,      {MEM(AM0), AN1}},
+{ "mov",       0xf010,      0xfff0,      0,    FMT_D0, 0,      {AM1, MEM(AN0)}},
+{ "mov",       0xf300,      0xffc0,      0,    FMT_D0, 0,      {MEM2(DI, AM0), DN2}},
+{ "mov",       0xf340,      0xffc0,      0,    FMT_D0, 0,      {DM2, MEM2(DI, AN0)}},
+{ "mov",       0xf380,      0xffc0,      0,    FMT_D0, 0,      {MEM2(DI, AM0), AN2}},
+{ "mov",       0xf3c0,      0xffc0,      0,    FMT_D0, 0,      {AM2, MEM2(DI, AN0)}},
+{ "mov",       0xf80000,    0xfff000,    0,    FMT_D1, 0,      {MEM2(SD8, AM0), DN1}},
+{ "mov",       0xf81000,    0xfff000,    0,    FMT_D1, 0,      {DM1, MEM2(SD8, AN0)}},
+{ "mov",       0xf82000,    0xfff000,    0,    FMT_D1, 0,      {MEM2(SD8,AM0), AN1}},
+{ "mov",       0xf83000,    0xfff000,    0,    FMT_D1, 0,      {AM1, MEM2(SD8, AN0)}},
+{ "mov",       0xf8f000,    0xfffc00,    0,    FMT_D1, AM33,   {MEM2(SD8, AM0), SP}},
+{ "mov",       0xf8f400,    0xfffc00,    0,    FMT_D1, AM33,   {SP, MEM2(SD8, AN0)}},
+{ "mov",       0xf90a00,    0xffff00,    0,    FMT_D6, AM33,   {MEM(RM0), RN2}},
+{ "mov",       0xf91a00,    0xffff00,    0,    FMT_D6, AM33,   {RM2, MEM(RN0)}},
+{ "mov",       0xf96a00,    0xffff00,    0x12, FMT_D6, AM33,   {MEMINC(RM0), RN2}},
+{ "mov",       0xf97a00,    0xffff00,    0,    FMT_D6, AM33,   {RM2, MEMINC(RN0)}},
+{ "mov",       0xfa000000,  0xfff00000,  0,    FMT_D2, 0,      {MEM2(SD16, AM0), DN1}},
+{ "mov",       0xfa100000,  0xfff00000,  0,    FMT_D2, 0,      {DM1, MEM2(SD16, AN0)}},
+{ "mov",       0xfa200000,  0xfff00000,  0,    FMT_D2, 0,      {MEM2(SD16, AM0), AN1}},
+{ "mov",       0xfa300000,  0xfff00000,  0,    FMT_D2, 0,      {AM1, MEM2(SD16, AN0)}},
+{ "mov",       0xfb0a0000,  0xffff0000,  0,    FMT_D7, AM33,   {MEM2(SD8, RM0), RN2}},
+{ "mov",       0xfb1a0000,  0xffff0000,  0,    FMT_D7, AM33,   {RM2, MEM2(SD8, RN0)}},
+{ "mov",       0xfb6a0000,  0xffff0000,  0x22, FMT_D7, AM33,   {MEMINC2 (RM0, SIMM8), RN2}},
+{ "mov",       0xfb7a0000,  0xffff0000,  0,    FMT_D7, AM33,   {RM2, MEMINC2 (RN0, SIMM8)}},
+{ "mov",       0xfb8e0000,  0xffff000f,  0,    FMT_D7, AM33,   {MEM2(RI, RM0), RD2}},
+{ "mov",       0xfb9e0000,  0xffff000f,  0,    FMT_D7, AM33,   {RD2, MEM2(RI, RN0)}},
+{ "mov",       0xfc000000,  0xfff00000,  0,    FMT_D4, 0,      {MEM2(IMM32,AM0), DN1}},
+{ "mov",       0xfc100000,  0xfff00000,  0,    FMT_D4, 0,      {DM1, MEM2(IMM32,AN0)}},
+{ "mov",       0xfc200000,  0xfff00000,  0,    FMT_D4, 0,      {MEM2(IMM32,AM0), AN1}},
+{ "mov",       0xfc300000,  0xfff00000,  0,    FMT_D4, 0,      {AM1, MEM2(IMM32,AN0)}},
+{ "mov",       0xfd0a0000,  0xffff0000,  0,    FMT_D8, AM33,   {MEM2(SD24, RM0), RN2}},
+{ "mov",       0xfd1a0000,  0xffff0000,  0,    FMT_D8, AM33,   {RM2, MEM2(SD24, RN0)}},
+{ "mov",       0xfd6a0000,  0xffff0000,  0x22, FMT_D8, AM33,   {MEMINC2 (RM0, IMM24), RN2}},
+{ "mov",       0xfd7a0000,  0xffff0000,  0,    FMT_D8, AM33,   {RM2, MEMINC2 (RN0, IMM24)}},
+{ "mov",       0xfe0a0000,  0xffff0000,  0,    FMT_D9, AM33,   {MEM2(IMM32_HIGH8,RM0), RN2}},
+{ "mov",       0xfe1a0000,  0xffff0000,  0,    FMT_D9, AM33,   {RM2, MEM2(IMM32_HIGH8, RN0)}},
+{ "mov",       0xfe6a0000,  0xffff0000,  0x22, FMT_D9, AM33,   {MEMINC2 (RM0, IMM32_HIGH8), RN2}},
+{ "mov",       0xfe7a0000,  0xffff0000,  0,    FMT_D9, AM33,   {RN2, MEMINC2 (RM0, IMM32_HIGH8)}},
+
+{ "movhu",     0xf060,      0xfff0,      0,    FMT_D0, 0,      {MEM(AM0), DN1}},
+{ "movhu",     0xf070,      0xfff0,      0,    FMT_D0, 0,      {DM1, MEM(AN0)}},
+{ "movhu",     0xf480,      0xffc0,      0,    FMT_D0, 0,      {MEM2(DI, AM0), DN2}},
+{ "movhu",     0xf4c0,      0xffc0,      0,    FMT_D0, 0,      {DM2, MEM2(DI, AN0)}},
+{ "movhu",     0xf86000,    0xfff000,    0,    FMT_D1, 0,      {MEM2(SD8, AM0), DN1}},
+{ "movhu",     0xf87000,    0xfff000,    0,    FMT_D1, 0,      {DM1, MEM2(SD8, AN0)}},
+{ "movhu",     0xf94a00,    0xffff00,    0,    FMT_D6, AM33,   {MEM(RM0), RN2}},
+{ "movhu",     0xf95a00,    0xffff00,    0,    FMT_D6, AM33,   {RM2, MEM(RN0)}},
+{ "movhu",     0xf9ea00,    0xffff00,    0x12, FMT_D6, AM33,   {MEMINC(RM0), RN2}},
+{ "movhu",     0xf9fa00,    0xffff00,    0,    FMT_D6, AM33,   {RM2, MEMINC(RN0)}},
+{ "movhu",     0xfa600000,  0xfff00000,  0,    FMT_D2, 0,      {MEM2(SD16, AM0), DN1}},
+{ "movhu",     0xfa700000,  0xfff00000,  0,    FMT_D2, 0,      {DM1, MEM2(SD16, AN0)}},
+{ "movhu",     0xfb4a0000,  0xffff0000,  0,    FMT_D7, AM33,   {MEM2(SD8, RM0), RN2}},
+{ "movhu",     0xfb5a0000,  0xffff0000,  0,    FMT_D7, AM33,   {RM2, MEM2(SD8, RN0)}},
+{ "movhu",     0xfbce0000,  0xffff000f,  0,    FMT_D7, AM33,   {MEM2(RI, RM0), RD2}},
+{ "movhu",     0xfbde0000,  0xffff000f,  0,    FMT_D7, AM33,   {RD2, MEM2(RI, RN0)}},
+{ "movhu",     0xfbea0000,  0xffff0000,  0x22, FMT_D7, AM33,   {MEMINC2 (RM0, SIMM8), RN2}},
+{ "movhu",     0xfbfa0000,  0xffff0000,  0,    FMT_D7, AM33,   {RM2, MEMINC2 (RN0, SIMM8)}},
+{ "movhu",     0xfc600000,  0xfff00000,  0,    FMT_D4, 0,      {MEM2(IMM32,AM0), DN1}},
+{ "movhu",     0xfc700000,  0xfff00000,  0,    FMT_D4, 0,      {DM1, MEM2(IMM32,AN0)}},
+{ "movhu",     0xfd4a0000,  0xffff0000,  0,    FMT_D8, AM33,   {MEM2(SD24, RM0), RN2}},
+{ "movhu",     0xfd5a0000,  0xffff0000,  0,    FMT_D8, AM33,   {RM2, MEM2(SD24, RN0)}},
+{ "movhu",     0xfdea0000,  0xffff0000,  0x22, FMT_D8, AM33,   {MEMINC2 (RM0, IMM24), RN2}},
+{ "movhu",     0xfdfa0000,  0xffff0000,  0,    FMT_D8, AM33,   {RM2, MEMINC2 (RN0, IMM24)}},
+{ "movhu",     0xfe4a0000,  0xffff0000,  0,    FMT_D9, AM33,   {MEM2(IMM32_HIGH8,RM0), RN2}},
+{ "movhu",     0xfe5a0000,  0xffff0000,  0,    FMT_D9, AM33,   {RM2, MEM2(IMM32_HIGH8, RN0)}},
+{ "movhu",     0xfeea0000,  0xffff0000,  0x22, FMT_D9, AM33,   {MEMINC2 (RM0, IMM32_HIGH8), RN2}},
+{ "movhu",     0xfefa0000,  0xffff0000,  0,    FMT_D9, AM33,   {RN2, MEMINC2 (RM0, IMM32_HIGH8)}},
+{ 0, 0, 0, 0, 0, 0, {0}},
+};
+
+/*
+ * fix up misalignment problems where possible
+ */
+asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code)
+{
+       const struct exception_table_entry *fixup;
+       const struct mn10300_opcode *pop;
+       unsigned long *registers = (unsigned long *) regs;
+       unsigned long data, *store, *postinc;
+       mm_segment_t seg;
+       siginfo_t info;
+       uint32_t opcode, disp, noc, xo, xm;
+       uint8_t *pc, byte;
+       void *address;
+       unsigned tmp, npop;
+
+       kdebug("MISALIGN at %lx\n", regs->pc);
+
+       if (in_interrupt())
+               die("Misalignment trap in interrupt context", regs, code);
+
+       if (regs->epsw & EPSW_IE)
+               asm volatile("or %0,epsw" : : "i"(EPSW_IE));
+
+       seg = get_fs();
+       set_fs(KERNEL_DS);
+
+       fixup = search_exception_tables(regs->pc);
+
+       /* first thing to do is to match the opcode */
+       pc = (u_int8_t *) regs->pc;
+
+       if (__get_user(byte, pc) != 0)
+               goto fetch_error;
+       opcode = byte;
+       noc = 8;
+
+       for (pop = mn10300_opcodes; pop->name; pop++) {
+               npop = log2(pop->opcode | pop->opmask);
+               if (npop <= 0 || npop > 31)
+                       continue;
+               npop = (npop + 8) & ~7;
+
+       got_more_bits:
+               if (npop == noc) {
+                       if ((opcode & pop->opmask) == pop->opcode)
+                               goto found_opcode;
+               } else if (npop > noc) {
+                       xo = pop->opcode >> (npop - noc);
+                       xm = pop->opmask >> (npop - noc);
+
+                       if ((opcode & xm) != xo)
+                               continue;
+
+                       /* we've got a partial match (an exact match on the
+                        * first N bytes), so we need to get some more data */
+                       pc++;
+                       if (__get_user(byte, pc) != 0)
+                               goto fetch_error;
+                       opcode = opcode << 8 | byte;
+                       noc += 8;
+                       goto got_more_bits;
+               } else {
+                       /* there's already been a partial match as long as the
+                        * complete match we're now considering, so this one
+                        * should't match */
+                       continue;
+               }
+       }
+
+       /* didn't manage to find a fixup */
+       if (!user_mode(regs))
+               printk(KERN_CRIT "MISALIGN: %lx: unsupported instruction %x\n",
+                      regs->pc, opcode);
+
+failed:
+       set_fs(seg);
+       if (die_if_no_fixup("misalignment error", regs, code))
+               return;
+
+       info.si_signo   = SIGBUS;
+       info.si_errno   = 0;
+       info.si_code    = BUS_ADRALN;
+       info.si_addr    = (void *) regs->pc;
+       force_sig_info(SIGBUS, &info, current);
+       return;
+
+       /* error reading opcodes */
+fetch_error:
+       if (!user_mode(regs))
+               printk(KERN_CRIT
+                      "MISALIGN: %p: fault whilst reading instruction data\n",
+                      pc);
+       goto failed;
+
+bad_addr_mode:
+       if (!user_mode(regs))
+               printk(KERN_CRIT
+                      "MISALIGN: %lx: unsupported addressing mode %x\n",
+                      regs->pc, opcode);
+       goto failed;
+
+bad_reg_mode:
+       if (!user_mode(regs))
+               printk(KERN_CRIT
+                      "MISALIGN: %lx: unsupported register mode %x\n",
+                      regs->pc, opcode);
+       goto failed;
+
+unsupported_instruction:
+       if (!user_mode(regs))
+               printk(KERN_CRIT
+                      "MISALIGN: %lx: unsupported instruction %x (%s)\n",
+                      regs->pc, opcode, pop->name);
+       goto failed;
+
+transfer_failed:
+       set_fs(seg);
+       if (fixup) {
+               regs->pc = fixup->fixup;
+               return;
+       }
+       if (die_if_no_fixup("misalignment fixup", regs, code))
+               return;
+
+       info.si_signo   = SIGSEGV;
+       info.si_errno   = 0;
+       info.si_code    = 0;
+       info.si_addr    = (void *) regs->pc;
+       force_sig_info(SIGSEGV, &info, current);
+       return;
+
+       /* we matched the opcode */
+found_opcode:
+       kdebug("MISALIGN: %lx: %x==%x { %x, %x }\n",
+              regs->pc, opcode, pop->opcode, pop->params[0], pop->params[1]);
+
+       tmp = format_tbl[pop->format].opsz;
+       if (tmp > noc)
+               BUG(); /* match was less complete than it ought to have been */
+
+       if (tmp < noc) {
+               tmp = noc - tmp;
+               opcode >>= tmp;
+               pc -= tmp >> 3;
+       }
+
+       /* grab the extra displacement (note it's LSB first) */
+       disp = 0;
+       tmp = format_tbl[pop->format].dispsz >> 3;
+       while (tmp > 0) {
+               tmp--;
+               disp <<= 8;
+
+               pc++;
+               if (__get_user(byte, pc) != 0)
+                       goto fetch_error;
+               disp |= byte;
+       }
+
+       set_fs(KERNEL_XDS);
+       if (fixup || regs->epsw & EPSW_nSL)
+               set_fs(seg);
+
+       tmp = (pop->params[0] ^ pop->params[1]) & 0x80000000;
+       if (!tmp) {
+               if (!user_mode(regs))
+                       printk(KERN_CRIT
+                              "MISALIGN: %lx:"
+                              " insn not move to/from memory %x\n",
+                              regs->pc, opcode);
+               goto failed;
+       }
+
+       if (pop->params[0] & 0x80000000) {
+               /* move memory to register */
+               if (!misalignment_addr(registers, pop->params[0], opcode, disp,
+                                      &address, &postinc))
+                       goto bad_addr_mode;
+
+               if (!misalignment_reg(registers, pop->params[1], opcode, disp,
+                                     &store))
+                       goto bad_reg_mode;
+
+               if (strcmp(pop->name, "mov") == 0) {
+                       kdebug("FIXUP: mov (%p),DARn\n", address);
+                       if (copy_from_user(&data, (void *) address, 4) != 0)
+                               goto transfer_failed;
+                       if (pop->params[0] & 0x1000000)
+                               *postinc += 4;
+               } else if (strcmp(pop->name, "movhu") == 0) {
+                       kdebug("FIXUP: movhu (%p),DARn\n", address);
+                       data = 0;
+                       if (copy_from_user(&data, (void *) address, 2) != 0)
+                               goto transfer_failed;
+                       if (pop->params[0] & 0x1000000)
+                               *postinc += 2;
+               } else {
+                       goto unsupported_instruction;
+               }
+
+               *store = data;
+       } else {
+               /* move register to memory */
+               if (!misalignment_reg(registers, pop->params[0], opcode, disp,
+                                     &store))
+                       goto bad_reg_mode;
+
+               if (!misalignment_addr(registers, pop->params[1], opcode, disp,
+                                      &address, &postinc))
+                       goto bad_addr_mode;
+
+               data = *store;
+
+               if (strcmp(pop->name, "mov") == 0) {
+                       kdebug("FIXUP: mov %lx,(%p)\n", data, address);
+                       if (copy_to_user((void *) address, &data, 4) != 0)
+                               goto transfer_failed;
+                       if (pop->params[1] & 0x1000000)
+                               *postinc += 4;
+               } else if (strcmp(pop->name, "movhu") == 0) {
+                       kdebug("FIXUP: movhu %hx,(%p)\n",
+                              (uint16_t) data, address);
+                       if (copy_to_user((void *) address, &data, 2) != 0)
+                               goto transfer_failed;
+                       if (pop->params[1] & 0x1000000)
+                               *postinc += 2;
+               } else {
+                       goto unsupported_instruction;
+               }
+       }
+
+       tmp = format_tbl[pop->format].opsz + format_tbl[pop->format].dispsz;
+       regs->pc += tmp >> 3;
+
+       set_fs(seg);
+       return;
+}
+
+/*
+ * determine the address that was being accessed
+ */
+static int misalignment_addr(unsigned long *registers, unsigned params,
+                            unsigned opcode, unsigned disp,
+                            void **_address, unsigned long **_postinc)
+{
+       unsigned long *postinc = NULL, address = 0, tmp;
+
+       params &= 0x7fffffff;
+
+       do {
+               switch (params & 0xff) {
+               case DM0:
+                       postinc = &registers[Dreg_index[opcode & 0x03]];
+                       address += *postinc;
+                       break;
+               case DM1:
+                       postinc = &registers[Dreg_index[opcode >> 2 & 0x0c]];
+                       address += *postinc;
+                       break;
+               case DM2:
+                       postinc = &registers[Dreg_index[opcode >> 4 & 0x30]];
+                       address += *postinc;
+                       break;
+               case AM0:
+                       postinc = &registers[Areg_index[opcode & 0x03]];
+                       address += *postinc;
+                       break;
+               case AM1:
+                       postinc = &registers[Areg_index[opcode >> 2 & 0x0c]];
+                       address += *postinc;
+                       break;
+               case AM2:
+                       postinc = &registers[Areg_index[opcode >> 4 & 0x30]];
+                       address += *postinc;
+                       break;
+               case RM0:
+                       postinc = &registers[Rreg_index[opcode & 0x0f]];
+                       address += *postinc;
+                       break;
+               case RM1:
+                       postinc = &registers[Rreg_index[opcode >> 2 & 0x0f]];
+                       address += *postinc;
+                       break;
+               case RM2:
+                       postinc = &registers[Rreg_index[opcode >> 4 & 0x0f]];
+                       address += *postinc;
+                       break;
+               case RM4:
+                       postinc = &registers[Rreg_index[opcode >> 8 & 0x0f]];
+                       address += *postinc;
+                       break;
+               case RM6:
+                       postinc = &registers[Rreg_index[opcode >> 12 & 0x0f]];
+                       address += *postinc;
+                       break;
+               case RD0:
+                       postinc = &registers[Rreg_index[disp & 0x0f]];
+                       address += *postinc;
+                       break;
+               case RD2:
+                       postinc = &registers[Rreg_index[disp >> 4 & 0x0f]];
+                       address += *postinc;
+                       break;
+
+               case SD8:
+               case SIMM8:
+                       address += (int32_t) (int8_t) (disp & 0xff);
+                       break;
+               case SD16:
+                       address += (int32_t) (int16_t) (disp & 0xffff);
+                       break;
+               case SD24:
+                       tmp = disp << 8;
+                       asm("asr 8,%0" : "=r"(tmp) : "0"(tmp));
+                       address += tmp;
+                       break;
+               case SIMM4_2:
+                       tmp = opcode >> 4 & 0x0f;
+                       tmp <<= 28;
+                       asm("asr 28,%0" : "=r"(tmp) : "0"(tmp));
+                       address += tmp;
+                       break;
+               case IMM24:
+                       address += disp & 0x00ffffff;
+                       break;
+               case IMM32:
+               case IMM32_HIGH8:
+                       address += disp;
+                       break;
+               default:
+                       return 0;
+               }
+       } while ((params >>= 8));
+
+       *_address = (void *) address;
+       *_postinc = postinc;
+       return 1;
+}
+
+/*
+ * determine the register that is acting as source/dest
+ */
+static int misalignment_reg(unsigned long *registers, unsigned params,
+                           unsigned opcode, unsigned disp,
+                           unsigned long **_register)
+{
+       params &= 0x7fffffff;
+
+       if (params & 0xffffff00)
+               return 0;
+
+       switch (params & 0xff) {
+       case DM0:
+               *_register = &registers[Dreg_index[opcode & 0x03]];
+               break;
+       case DM1:
+               *_register = &registers[Dreg_index[opcode >> 2 & 0x03]];
+               break;
+       case DM2:
+               *_register = &registers[Dreg_index[opcode >> 4 & 0x03]];
+               break;
+       case AM0:
+               *_register = &registers[Areg_index[opcode & 0x03]];
+               break;
+       case AM1:
+               *_register = &registers[Areg_index[opcode >> 2 & 0x03]];
+               break;
+       case AM2:
+               *_register = &registers[Areg_index[opcode >> 4 & 0x03]];
+               break;
+       case RM0:
+               *_register = &registers[Rreg_index[opcode & 0x0f]];
+               break;
+       case RM1:
+               *_register = &registers[Rreg_index[opcode >> 2 & 0x0f]];
+               break;
+       case RM2:
+               *_register = &registers[Rreg_index[opcode >> 4 & 0x0f]];
+               break;
+       case RM4:
+               *_register = &registers[Rreg_index[opcode >> 8 & 0x0f]];
+               break;
+       case RM6:
+               *_register = &registers[Rreg_index[opcode >> 12 & 0x0f]];
+               break;
+       case RD0:
+               *_register = &registers[Rreg_index[disp & 0x0f]];
+               break;
+       case RD2:
+               *_register = &registers[Rreg_index[disp >> 4 & 0x0f]];
+               break;
+       case SP:
+               *_register = &registers[REG_SP >> 2];
+               break;
+
+       default:
+               return 0;
+       }
+
+       return 1;
+}
diff --git a/arch/mn10300/mm/mmu-context.c b/arch/mn10300/mm/mmu-context.c
new file mode 100644 (file)
index 0000000..31c9d27
--- /dev/null
@@ -0,0 +1,80 @@
+/* MN10300 MMU context allocation and management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+
+/*
+ * list of the MMU contexts last allocated on each CPU
+ */
+unsigned long mmu_context_cache[NR_CPUS] = {
+       [0 ... NR_CPUS - 1] = MMU_CONTEXT_FIRST_VERSION * 2 - 1,
+};
+
+/*
+ * flush the specified TLB entry
+ */
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+       unsigned long pteu, cnx, flags;
+
+       addr &= PAGE_MASK;
+
+       /* make sure the context doesn't migrate and defend against
+        * interference from vmalloc'd regions */
+       local_irq_save(flags);
+
+       cnx = mm_context(vma->vm_mm);
+
+       if (cnx != MMU_NO_CONTEXT) {
+               pteu = addr | (cnx & 0x000000ffUL);
+               IPTEU = pteu;
+               DPTEU = pteu;
+               if (IPTEL & xPTEL_V)
+                       IPTEL = 0;
+               if (DPTEL & xPTEL_V)
+                       DPTEL = 0;
+       }
+
+       local_irq_restore(flags);
+}
+
+/*
+ * preemptively set a TLB entry
+ */
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+{
+       unsigned long pteu, ptel, cnx, flags;
+
+       addr &= PAGE_MASK;
+       ptel = pte_val(pte) & ~(xPTEL_UNUSED1 | xPTEL_UNUSED2);
+
+       /* make sure the context doesn't migrate and defend against
+        * interference from vmalloc'd regions */
+       local_irq_save(flags);
+
+       cnx = mm_context(vma->vm_mm);
+
+       if (cnx != MMU_NO_CONTEXT) {
+               pteu = addr | (cnx & 0x000000ffUL);
+               if (!(pte_val(pte) & _PAGE_NX)) {
+                       IPTEU = pteu;
+                       if (IPTEL & xPTEL_V)
+                               IPTEL = ptel;
+               }
+               DPTEU = pteu;
+               if (DPTEL & xPTEL_V)
+                       DPTEL = ptel;
+       }
+
+       local_irq_restore(flags);
+}
diff --git a/arch/mn10300/mm/pgtable.c b/arch/mn10300/mm/pgtable.c
new file mode 100644 (file)
index 0000000..a477038
--- /dev/null
@@ -0,0 +1,197 @@
+/* MN10300 Page table management
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/smp.h>
+#include <linux/highmem.h>
+#include <linux/slab.h>
+#include <linux/pagemap.h>
+#include <linux/spinlock.h>
+#include <linux/quicklist.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+
+void show_mem(void)
+{
+       unsigned long i;
+       int free = 0, total = 0, reserved = 0, shared = 0;
+
+       int cached = 0;
+       printk(KERN_INFO "Mem-info:\n");
+       show_free_areas();
+       i = max_mapnr;
+       while (i-- > 0) {
+               total++;
+               if (PageReserved(mem_map + i))
+                       reserved++;
+               else if (PageSwapCache(mem_map + i))
+                       cached++;
+               else if (!page_count(mem_map + i))
+                       free++;
+               else
+                       shared += page_count(mem_map + i) - 1;
+       }
+       printk(KERN_INFO "%d pages of RAM\n", total);
+       printk(KERN_INFO "%d free pages\n", free);
+       printk(KERN_INFO "%d reserved pages\n", reserved);
+       printk(KERN_INFO "%d pages shared\n", shared);
+       printk(KERN_INFO "%d pages swap cached\n", cached);
+}
+
+/*
+ * Associate a large virtual page frame with a given physical page frame
+ * and protection flags for that frame. pfn is for the base of the page,
+ * vaddr is what the page gets mapped to - both must be properly aligned.
+ * The pmd must already be instantiated. Assumes PAE mode.
+ */
+void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags)
+{
+       pgd_t *pgd;
+       pud_t *pud;
+       pmd_t *pmd;
+
+       if (vaddr & (PMD_SIZE-1)) {             /* vaddr is misaligned */
+               printk(KERN_ERR "set_pmd_pfn: vaddr misaligned\n");
+               return; /* BUG(); */
+       }
+       if (pfn & (PTRS_PER_PTE-1)) {           /* pfn is misaligned */
+               printk(KERN_ERR "set_pmd_pfn: pfn misaligned\n");
+               return; /* BUG(); */
+       }
+       pgd = swapper_pg_dir + pgd_index(vaddr);
+       if (pgd_none(*pgd)) {
+               printk(KERN_ERR "set_pmd_pfn: pgd_none\n");
+               return; /* BUG(); */
+       }
+       pud = pud_offset(pgd, vaddr);
+       pmd = pmd_offset(pud, vaddr);
+       set_pmd(pmd, pfn_pmd(pfn, flags));
+       /*
+        * It's enough to flush this one mapping.
+        * (PGE mappings get flushed as well)
+        */
+       __flush_tlb_one(vaddr);
+}
+
+pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+       pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT);
+       if (pte)
+               clear_page(pte);
+       return pte;
+}
+
+struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+       struct page *pte;
+
+#ifdef CONFIG_HIGHPTE
+       pte = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM|__GFP_REPEAT, 0);
+#else
+       pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0);
+#endif
+       if (pte)
+               clear_highpage(pte);
+       return pte;
+}
+
+/*
+ * List of all pgd's needed for non-PAE so it can invalidate entries
+ * in both cached and uncached pgd's; not needed for PAE since the
+ * kernel pmd is shared. If PAE were not to share the pmd a similar
+ * tactic would be needed. This is essentially codepath-based locking
+ * against pageattr.c; it is the unique case in which a valid change
+ * of kernel pagetables can't be lazily synchronized by vmalloc faults.
+ * vmalloc faults work because attached pagetables are never freed.
+ * If the locking proves to be non-performant, a ticketing scheme with
+ * checks at dup_mmap(), exec(), and other mmlist addition points
+ * could be used. The locking scheme was chosen on the basis of
+ * manfred's recommendations and having no core impact whatsoever.
+ * -- wli
+ */
+DEFINE_SPINLOCK(pgd_lock);
+struct page *pgd_list;
+
+static inline void pgd_list_add(pgd_t *pgd)
+{
+       struct page *page = virt_to_page(pgd);
+       page->index = (unsigned long) pgd_list;
+       if (pgd_list)
+               set_page_private(pgd_list, (unsigned long) &page->index);
+       pgd_list = page;
+       set_page_private(page, (unsigned long) &pgd_list);
+}
+
+static inline void pgd_list_del(pgd_t *pgd)
+{
+       struct page *next, **pprev, *page = virt_to_page(pgd);
+       next = (struct page *) page->index;
+       pprev = (struct page **) page_private(page);
+       *pprev = next;
+       if (next)
+               set_page_private(next, (unsigned long) pprev);
+}
+
+void pgd_ctor(void *pgd)
+{
+       unsigned long flags;
+
+       if (PTRS_PER_PMD == 1)
+               spin_lock_irqsave(&pgd_lock, flags);
+
+       memcpy((pgd_t *)pgd + USER_PTRS_PER_PGD,
+                       swapper_pg_dir + USER_PTRS_PER_PGD,
+                       (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+
+       if (PTRS_PER_PMD > 1)
+               return;
+
+       pgd_list_add(pgd);
+       spin_unlock_irqrestore(&pgd_lock, flags);
+       memset(pgd, 0, USER_PTRS_PER_PGD * sizeof(pgd_t));
+}
+
+/* never called when PTRS_PER_PMD > 1 */
+void pgd_dtor(void *pgd)
+{
+       unsigned long flags; /* can be called from interrupt context */
+
+       spin_lock_irqsave(&pgd_lock, flags);
+       pgd_list_del(pgd);
+       spin_unlock_irqrestore(&pgd_lock, flags);
+}
+
+pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+       return quicklist_alloc(0, GFP_KERNEL, pgd_ctor);
+}
+
+void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+       quicklist_free(0, pgd_dtor, pgd);
+}
+
+void __init pgtable_cache_init(void)
+{
+}
+
+void check_pgt_cache(void)
+{
+       quicklist_trim(0, pgd_dtor, 25, 16);
+}
diff --git a/arch/mn10300/mm/tlb-mn10300.S b/arch/mn10300/mm/tlb-mn10300.S
new file mode 100644 (file)
index 0000000..7892080
--- /dev/null
@@ -0,0 +1,207 @@
+###############################################################################
+#
+# TLB loading functions
+#
+# Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Modified by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/intctl-regs.h>
+#include <asm/frame.inc>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+###############################################################################
+#
+# Instruction TLB Miss handler entry point
+#
+###############################################################################
+       .type   itlb_miss,@function
+ENTRY(itlb_miss)
+       and     ~EPSW_NMID,epsw
+#ifdef CONFIG_GDBSTUB
+       movm    [d2,d3,a2],(sp)
+#else
+       or      EPSW_nAR,epsw           # switch D0-D3 & A0-A3 to the alternate
+                                       # register bank
+       nop
+       nop
+       nop
+#endif
+
+       mov     (IPTEU),d3
+       mov     (PTBR),a2
+       mov     d3,d2
+       and     0xffc00000,d2
+       lsr     20,d2
+       mov     (a2,d2),a2              # PTD *ptd = PGD[addr 31..22]
+       btst    _PAGE_VALID,a2
+       beq     itlb_miss_fault         # jump if doesn't point anywhere
+
+       and     ~(PAGE_SIZE-1),a2
+       mov     d3,d2
+       and     0x003ff000,d2
+       lsr     10,d2
+       add     d2,a2
+       mov     (a2),d2                 # get pte from PTD[addr 21..12]
+       btst    _PAGE_VALID,d2
+       beq     itlb_miss_fault         # jump if doesn't point to a page
+                                       # (might be a swap id)
+       bset    _PAGE_ACCESSED,(0,a2)
+       and     ~(xPTEL_UNUSED1|xPTEL_UNUSED2),d2
+itlb_miss_set:
+       mov     d2,(IPTEL)              # change the TLB
+#ifdef CONFIG_GDBSTUB
+       movm    (sp),[d2,d3,a2]
+#endif
+       rti
+
+itlb_miss_fault:
+       mov     _PAGE_VALID,d2          # force address error handler to be
+                                       # invoked
+       bra     itlb_miss_set
+
+       .size   itlb_miss, . - itlb_miss
+
+###############################################################################
+#
+# Data TLB Miss handler entry point
+#
+###############################################################################
+       .type   dtlb_miss,@function
+ENTRY(dtlb_miss)
+       and     ~EPSW_NMID,epsw
+#ifdef CONFIG_GDBSTUB
+       movm    [d2,d3,a2],(sp)
+#else
+       or      EPSW_nAR,epsw           # switch D0-D3 & A0-A3 to the alternate
+                                       # register bank
+       nop
+       nop
+       nop
+#endif
+
+       mov     (DPTEU),d3
+       mov     (PTBR),a2
+       mov     d3,d2
+       and     0xffc00000,d2
+       lsr     20,d2
+       mov     (a2,d2),a2              # PTD *ptd = PGD[addr 31..22]
+       btst    _PAGE_VALID,a2
+       beq     dtlb_miss_fault         # jump if doesn't point anywhere
+
+       and     ~(PAGE_SIZE-1),a2
+       mov     d3,d2
+       and     0x003ff000,d2
+       lsr     10,d2
+       add     d2,a2
+       mov     (a2),d2                 # get pte from PTD[addr 21..12]
+       btst    _PAGE_VALID,d2
+       beq     dtlb_miss_fault         # jump if doesn't point to a page
+                                       # (might be a swap id)
+       bset    _PAGE_ACCESSED,(0,a2)
+       and     ~(xPTEL_UNUSED1|xPTEL_UNUSED2),d2
+dtlb_miss_set:
+       mov     d2,(DPTEL)              # change the TLB
+#ifdef CONFIG_GDBSTUB
+       movm    (sp),[d2,d3,a2]
+#endif
+       rti
+
+dtlb_miss_fault:
+       mov     _PAGE_VALID,d2          # force address error handler to be
+                                       # invoked
+       bra     dtlb_miss_set
+       .size   dtlb_miss, . - dtlb_miss
+
+###############################################################################
+#
+# Instruction TLB Address Error handler entry point
+#
+###############################################################################
+       .type   itlb_aerror,@function
+ENTRY(itlb_aerror)
+       and     ~EPSW_NMID,epsw
+       add     -4,sp
+       SAVE_ALL
+       add     -4,sp                           # need to pass three params
+
+       # calculate the fault code
+       movhu   (MMUFCR_IFC),d1
+       or      0x00010000,d1                   # it's an instruction fetch
+
+       # determine the page address
+       mov     (IPTEU),a2
+       mov     a2,d0
+       and     PAGE_MASK,d0
+       mov     d0,(12,sp)
+
+       clr     d0
+       mov     d0,(IPTEL)
+
+       and     ~EPSW_NMID,epsw
+       or      EPSW_IE,epsw
+       mov     fp,d0
+       call    do_page_fault[],0               # do_page_fault(regs,code,addr
+
+       jmp     ret_from_exception
+       .size   itlb_aerror, . - itlb_aerror
+
+###############################################################################
+#
+# Data TLB Address Error handler entry point
+#
+###############################################################################
+       .type   dtlb_aerror,@function
+ENTRY(dtlb_aerror)
+       and     ~EPSW_NMID,epsw
+       add     -4,sp
+       mov     d1,(sp)
+
+       movhu   (MMUFCR_DFC),d1                 # is it the initial valid write
+                                               # to this page?
+       and     MMUFCR_xFC_INITWR,d1
+       beq     dtlb_pagefault                  # jump if not
+
+       mov     (DPTEL),d1                      # set the dirty bit
+                                               # (don't replace with BSET!)
+       or      _PAGE_DIRTY,d1
+       mov     d1,(DPTEL)
+       mov     (sp),d1
+       add     4,sp
+       rti
+
+       ALIGN
+dtlb_pagefault:
+       mov     (sp),d1
+       SAVE_ALL
+       add     -4,sp                           # need to pass three params
+
+       # calculate the fault code
+       movhu   (MMUFCR_DFC),d1
+
+       # determine the page address
+       mov     (DPTEU),a2
+       mov     a2,d0
+       and     PAGE_MASK,d0
+       mov     d0,(12,sp)
+
+       clr     d0
+       mov     d0,(DPTEL)
+
+       and     ~EPSW_NMID,epsw
+       or      EPSW_IE,epsw
+       mov     fp,d0
+       call    do_page_fault[],0               # do_page_fault(regs,code,addr
+
+       jmp     ret_from_exception
+       .size   dtlb_aerror, . - dtlb_aerror
diff --git a/arch/mn10300/oprofile/Kconfig b/arch/mn10300/oprofile/Kconfig
new file mode 100644 (file)
index 0000000..19d3773
--- /dev/null
@@ -0,0 +1,23 @@
+
+menu "Profiling support"
+       depends on EXPERIMENTAL
+
+config PROFILING
+       bool "Profiling support (EXPERIMENTAL)"
+       help
+         Say Y here to enable the extended profiling support mechanisms used
+         by profilers such as OProfile.
+
+
+config OPROFILE
+       tristate "OProfile system profiling (EXPERIMENTAL)"
+       depends on PROFILING
+       help
+         OProfile is a profiling system capable of profiling the
+         whole system, include the kernel, kernel modules, libraries,
+         and applications.
+
+         If unsure, say N.
+
+endmenu
+
diff --git a/arch/mn10300/oprofile/Makefile b/arch/mn10300/oprofile/Makefile
new file mode 100644 (file)
index 0000000..918dbe6
--- /dev/null
@@ -0,0 +1,13 @@
+#
+# Makefile for the MN10300-specific profiling code
+#
+obj-$(CONFIG_OPROFILE) += oprofile.o
+
+DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
+               oprof.o cpu_buffer.o buffer_sync.o \
+               event_buffer.o oprofile_files.o \
+               oprofilefs.o oprofile_stats.o \
+               timer_int.o )
+
+oprofile-y                             := $(DRIVER_OBJS) op_model_null.o
+
diff --git a/arch/mn10300/oprofile/op_model_null.c b/arch/mn10300/oprofile/op_model_null.c
new file mode 100644 (file)
index 0000000..cd4ab37
--- /dev/null
@@ -0,0 +1,22 @@
+/* Null profiling driver
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * Licence.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+       return -ENODEV;
+}
+
+void oprofile_arch_exit(void)
+{
+}
+
diff --git a/arch/mn10300/proc-mn103e010/Makefile b/arch/mn10300/proc-mn103e010/Makefile
new file mode 100644 (file)
index 0000000..ac2c978
--- /dev/null
@@ -0,0 +1,5 @@
+#
+# Makefile for the MN103E010 processor chip specific code
+#
+obj-y   := proc-init.o
+
diff --git a/arch/mn10300/proc-mn103e010/proc-init.c b/arch/mn10300/proc-mn103e010/proc-init.c
new file mode 100644 (file)
index 0000000..9a482ef
--- /dev/null
@@ -0,0 +1,75 @@
+/* MN103E010 Processor initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <asm/rtc.h>
+
+/*
+ * initialise the on-silicon processor peripherals
+ */
+asmlinkage void __init processor_init(void)
+{
+       int loop;
+
+       /* set up the exception table first */
+       for (loop = 0x000; loop < 0x400; loop += 8)
+               __set_intr_stub(loop, __common_exception);
+
+       __set_intr_stub(EXCEP_ITLBMISS,         itlb_miss);
+       __set_intr_stub(EXCEP_DTLBMISS,         dtlb_miss);
+       __set_intr_stub(EXCEP_IAERROR,          itlb_aerror);
+       __set_intr_stub(EXCEP_DAERROR,          dtlb_aerror);
+       __set_intr_stub(EXCEP_BUSERROR,         raw_bus_error);
+       __set_intr_stub(EXCEP_DOUBLE_FAULT,     double_fault);
+       __set_intr_stub(EXCEP_SYSCALL0,         system_call);
+
+       __set_intr_stub(EXCEP_NMI,              nmi_handler);
+       __set_intr_stub(EXCEP_WDT,              nmi_handler);
+       __set_intr_stub(EXCEP_IRQ_LEVEL0,       irq_handler);
+       __set_intr_stub(EXCEP_IRQ_LEVEL1,       irq_handler);
+       __set_intr_stub(EXCEP_IRQ_LEVEL2,       irq_handler);
+       __set_intr_stub(EXCEP_IRQ_LEVEL3,       irq_handler);
+       __set_intr_stub(EXCEP_IRQ_LEVEL4,       irq_handler);
+       __set_intr_stub(EXCEP_IRQ_LEVEL5,       irq_handler);
+       __set_intr_stub(EXCEP_IRQ_LEVEL6,       irq_handler);
+
+       IVAR0 = EXCEP_IRQ_LEVEL0;
+       IVAR1 = EXCEP_IRQ_LEVEL1;
+       IVAR2 = EXCEP_IRQ_LEVEL2;
+       IVAR3 = EXCEP_IRQ_LEVEL3;
+       IVAR4 = EXCEP_IRQ_LEVEL4;
+       IVAR5 = EXCEP_IRQ_LEVEL5;
+       IVAR6 = EXCEP_IRQ_LEVEL6;
+
+       mn10300_dcache_flush_inv();
+       mn10300_icache_inv();
+
+       /* disable all interrupts and set to priority 6 (lowest) */
+       for (loop = 0; loop < NR_IRQS; loop++)
+               GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT;
+
+       /* clear the timers */
+       TM0MD   = 0;
+       TM1MD   = 0;
+       TM2MD   = 0;
+       TM3MD   = 0;
+       TM4MD   = 0;
+       TM5MD   = 0;
+       TM6MD   = 0;
+       TM6MDA  = 0;
+       TM6MDB  = 0;
+       TM7MD   = 0;
+       TM8MD   = 0;
+       TM9MD   = 0;
+       TM10MD  = 0;
+       TM11MD  = 0;
+
+       calibrate_clock();
+}
diff --git a/arch/mn10300/unit-asb2303/Makefile b/arch/mn10300/unit-asb2303/Makefile
new file mode 100644 (file)
index 0000000..03e579f
--- /dev/null
@@ -0,0 +1,6 @@
+###############################################################################
+#
+# Makefile for the ASB2303 board
+#
+###############################################################################
+obj-y   := unit-init.o smc91111.o leds.o
diff --git a/arch/mn10300/unit-asb2303/leds.c b/arch/mn10300/unit-asb2303/leds.c
new file mode 100644 (file)
index 0000000..cd4bc78
--- /dev/null
@@ -0,0 +1,52 @@
+/* ASB2303 peripheral 7-segment LEDs x1 support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/intctl-regs.h>
+#include <asm/rtc-regs.h>
+#include <asm/unit/leds.h>
+
+#if 0
+static const u8 asb2303_led_hex_tbl[16] = {
+       0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0,
+       0x00, 0x20, 0x10, 0x06, 0x8c, 0x42, 0x0c, 0x1c
+};
+#endif
+
+static const u8 asb2303_led_chase_tbl[6] = {
+       ~0x02,  /* top          - segA */
+       ~0x04,  /* right top    - segB */
+       ~0x08,  /* right bottom - segC */
+       ~0x10,  /* bottom       - segD */
+       ~0x20,  /* left bottom  - segE */
+       ~0x40,  /* left top     - segF */
+};
+
+static unsigned asb2303_led_chase;
+
+void peripheral_leds_display_exception(enum exception_code code)
+{
+       ASB2303_GPIO0DEF = 0x5555;      /* configure as an output port */
+       ASB2303_7SEGLEDS = 0x6d;        /* triple horizontal bar */
+}
+
+void peripheral_leds_led_chase(void)
+{
+       ASB2303_GPIO0DEF = 0x5555;      /* configure as an output port */
+       ASB2303_7SEGLEDS = asb2303_led_chase_tbl[asb2303_led_chase];
+       asb2303_led_chase++;
+       if (asb2303_led_chase >= 6)
+               asb2303_led_chase = 0;
+}
diff --git a/arch/mn10300/unit-asb2303/smc91111.c b/arch/mn10300/unit-asb2303/smc91111.c
new file mode 100644 (file)
index 0000000..30875dd
--- /dev/null
@@ -0,0 +1,52 @@
+/* ASB2303 initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include <asm/timex.h>
+#include <asm/processor.h>
+#include <asm/intctl-regs.h>
+#include <asm/unit/smc91111.h>
+
+static struct resource smc91c111_resources[] = {
+       [0] = {
+               .start          = SMC91111_BASE,
+               .end            = SMC91111_BASE_END,
+               .flags          = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start          = SMC91111_IRQ,
+               .end            = SMC91111_IRQ,
+               .flags          = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device smc91c111_device = {
+       .name           = "smc91x",
+       .id             = 0,
+       .num_resources  = ARRAY_SIZE(smc91c111_resources),
+       .resource       = smc91c111_resources,
+};
+
+/*
+ * add platform devices
+ */
+static int __init unit_device_init(void)
+{
+       platform_device_register(&smc91c111_device);
+       return 0;
+}
+
+device_initcall(unit_device_init);
diff --git a/arch/mn10300/unit-asb2303/unit-init.c b/arch/mn10300/unit-asb2303/unit-init.c
new file mode 100644 (file)
index 0000000..14b2c81
--- /dev/null
@@ -0,0 +1,60 @@
+/* ASB2303 initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/processor.h>
+#include <asm/irq.h>
+#include <asm/intctl-regs.h>
+
+/*
+ * initialise some of the unit hardware before gdbstub is set up
+ */
+asmlinkage void __init unit_init(void)
+{
+       /* set up the external interrupts */
+       SET_XIRQ_TRIGGER(0, XIRQ_TRIGGER_HILEVEL);
+       SET_XIRQ_TRIGGER(2, XIRQ_TRIGGER_LOWLEVEL);
+       SET_XIRQ_TRIGGER(3, XIRQ_TRIGGER_HILEVEL);
+       SET_XIRQ_TRIGGER(4, XIRQ_TRIGGER_LOWLEVEL);
+       SET_XIRQ_TRIGGER(5, XIRQ_TRIGGER_LOWLEVEL);
+}
+
+/*
+ * initialise the rest of the unit hardware after gdbstub is ready
+ */
+void __init unit_setup(void)
+{
+}
+
+/*
+ * initialise the external interrupts used by a unit of this type
+ */
+void __init unit_init_IRQ(void)
+{
+       unsigned int extnum;
+
+       for (extnum = 0; extnum < NR_XIRQS; extnum++) {
+               switch (GET_XIRQ_TRIGGER(extnum)) {
+               case XIRQ_TRIGGER_HILEVEL:
+               case XIRQ_TRIGGER_LOWLEVEL:
+                       set_irq_handler(XIRQ2IRQ(extnum), handle_level_irq);
+                       break;
+               default:
+                       break;
+               }
+       }
+}
diff --git a/arch/mn10300/unit-asb2305/Makefile b/arch/mn10300/unit-asb2305/Makefile
new file mode 100644 (file)
index 0000000..0551022
--- /dev/null
@@ -0,0 +1,8 @@
+###############################################################################
+#
+# Makefile for the ASB2305 board
+#
+###############################################################################
+obj-y   := unit-init.o leds.o
+
+obj-$(CONFIG_PCI) += pci.o pci-asb2305.o pci-irq.o pci-iomap.o
diff --git a/arch/mn10300/unit-asb2305/leds.c b/arch/mn10300/unit-asb2305/leds.c
new file mode 100644 (file)
index 0000000..e99dcc9
--- /dev/null
@@ -0,0 +1,124 @@
+/* ASB2305 Peripheral 7-segment LEDs x4 support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/cpu/intctl-regs.h>
+#include <asm/cpu/rtc-regs.h>
+#include <asm/unit/leds.h>
+
+static const u8 asb2305_led_hex_tbl[16] = {
+       0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0,
+       0x00, 0x20, 0x10, 0x06, 0x8c, 0x42, 0x0c, 0x1c
+};
+
+static const u32 asb2305_led_chase_tbl[6] = {
+       ~0x02020202,    /* top          - segA */
+       ~0x04040404,    /* right top    - segB */
+       ~0x08080808,    /* right bottom - segC */
+       ~0x10101010,    /* bottom       - segD */
+       ~0x20202020,    /* left bottom  - segE */
+       ~0x40404040,    /* left top     - segF */
+};
+
+static unsigned asb2305_led_chase;
+
+void peripheral_leds7x4_display_dec(unsigned int val, unsigned int points)
+{
+       u32 leds;
+
+       leds = asb2305_led_hex_tbl[(val/1000) % 10];
+       leds <<= 8;
+       leds |= asb2305_led_hex_tbl[(val/100) % 10];
+       leds <<= 8;
+       leds |= asb2305_led_hex_tbl[(val/10) % 10];
+       leds <<= 8;
+       leds |= asb2305_led_hex_tbl[val % 10];
+       leds |= points^0x01010101;
+
+       ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds7x4_display_hex(unsigned int val, unsigned int points)
+{
+       u32 leds;
+
+       leds = asb2305_led_hex_tbl[(val/1000) % 10];
+       leds <<= 8;
+       leds |= asb2305_led_hex_tbl[(val/100) % 10];
+       leds <<= 8;
+       leds |= asb2305_led_hex_tbl[(val/10) % 10];
+       leds <<= 8;
+       leds |= asb2305_led_hex_tbl[val % 10];
+       leds |= points^0x01010101;
+
+       ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds_display_exception(enum exception_code code)
+{
+       u32 leds;
+
+       leds = asb2305_led_hex_tbl[(code/0x100) % 0x10];
+       leds <<= 8;
+       leds |= asb2305_led_hex_tbl[(code/0x10) % 0x10];
+       leds <<= 8;
+       leds |= asb2305_led_hex_tbl[code % 0x10];
+       leds |= 0x6d010101;
+
+       ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds7x4_display_minssecs(unsigned int time, unsigned int points)
+{
+       u32 leds;
+
+       leds = asb2305_led_hex_tbl[(time/600) % 6];
+       leds <<= 8;
+       leds |= asb2305_led_hex_tbl[(time/60) % 10];
+       leds <<= 8;
+       leds |= asb2305_led_hex_tbl[(time/10) % 6];
+       leds <<= 8;
+       leds |= asb2305_led_hex_tbl[time % 10];
+       leds |= points^0x01010101;
+
+       ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds7x4_display_rtc(void)
+{
+       unsigned int clock;
+       u8 mins, secs;
+
+       mins = RTMCR;
+       secs = RTSCR;
+
+       clock = ((mins & 0xf0) >> 4);
+       clock *= 10;
+       clock += (mins & 0x0f);
+       clock *= 6;
+
+       clock += ((secs & 0xf0) >> 4);
+       clock *= 10;
+       clock += (secs & 0x0f);
+
+       peripheral_leds7x4_display_minssecs(clock, 0);
+}
+
+void peripheral_leds_led_chase(void)
+{
+       ASB2305_7SEGLEDS = asb2305_led_chase_tbl[asb2305_led_chase];
+       asb2305_led_chase++;
+       if (asb2305_led_chase >= 6)
+               asb2305_led_chase = 0;
+}
diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c
new file mode 100644 (file)
index 0000000..d100ca7
--- /dev/null
@@ -0,0 +1,303 @@
+/* ASB2305 PCI resource stuff
+ *
+ * Copyright (C) 2001 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/i386/pci-i386.c
+ *   - Copyright 1997--2000 Martin Mares <mj@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include "pci-asb2305.h"
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+void pcibios_align_resource(void *data, struct resource *res,
+                           resource_size_t size, resource_size_t align)
+{
+#if 0
+       struct pci_dev *dev = data;
+
+       printk(KERN_DEBUG
+              "### PCIBIOS_ALIGN_RESOURCE(%s,,{%08lx-%08lx,%08lx},%lx)\n",
+              pci_name(dev),
+              res->start,
+              res->end,
+              res->flags,
+              size
+              );
+#endif
+
+       if (res->flags & IORESOURCE_IO) {
+               unsigned long start = res->start;
+
+               if (start & 0x300) {
+                       start = (start + 0x3ff) & ~0x3ff;
+                       res->start = start;
+               }
+       }
+}
+
+
+/*
+ *  Handle resources of PCI devices.  If the world were perfect, we could
+ *  just allocate all the resource regions and do nothing more.  It isn't.
+ *  On the other hand, we cannot just re-allocate all devices, as it would
+ *  require us to know lots of host bridge internals.  So we attempt to
+ *  keep as much of the original configuration as possible, but tweak it
+ *  when it's found to be wrong.
+ *
+ *  Known BIOS problems we have to work around:
+ *     - I/O or memory regions not configured
+ *     - regions configured, but not enabled in the command register
+ *     - bogus I/O addresses above 64K used
+ *     - expansion ROMs left enabled (this may sound harmless, but given
+ *       the fact the PCI specs explicitly allow address decoders to be
+ *       shared between expansion ROMs and other resource regions, it's
+ *       at least dangerous)
+ *
+ *  Our solution:
+ *     (1) Allocate resources for all buses behind PCI-to-PCI bridges.
+ *         This gives us fixed barriers on where we can allocate.
+ *     (2) Allocate resources for all enabled devices.  If there is
+ *         a collision, just mark the resource as unallocated. Also
+ *         disable expansion ROMs during this step.
+ *     (3) Try to allocate resources for disabled devices.  If the
+ *         resources were assigned correctly, everything goes well,
+ *         if they weren't, they won't disturb allocation of other
+ *         resources.
+ *     (4) Assign new addresses to resources which were either
+ *         not configured at all or misconfigured.  If explicitly
+ *         requested by the user, configure expansion ROM address
+ *         as well.
+ */
+static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
+{
+       struct pci_bus *bus;
+       struct pci_dev *dev;
+       int idx;
+       struct resource *r, *pr;
+
+       /* Depth-First Search on bus tree */
+       list_for_each_entry(bus, bus_list, node) {
+               dev = bus->self;
+               if (dev) {
+                       for (idx = PCI_BRIDGE_RESOURCES;
+                            idx < PCI_NUM_RESOURCES;
+                            idx++) {
+                               r = &dev->resource[idx];
+                               if (!r->flags)
+                                       continue;
+                               pr = pci_find_parent_resource(dev, r);
+                               if (!r->start ||
+                                   !pr ||
+                                   request_resource(pr, r) < 0) {
+                                       printk(KERN_ERR "PCI:"
+                                              " Cannot allocate resource"
+                                              " region %d of bridge %s\n",
+                                              idx, pci_name(dev));
+                                       /* Something is wrong with the region.
+                                        * Invalidate the resource to prevent
+                                        * child resource allocations in this
+                                        * range. */
+                                       r->flags = 0;
+                               }
+                       }
+               }
+               pcibios_allocate_bus_resources(&bus->children);
+       }
+}
+
+static void __init pcibios_allocate_resources(int pass)
+{
+       struct pci_dev *dev = NULL;
+       int idx, disabled;
+       u16 command;
+       struct resource *r, *pr;
+
+       for_each_pci_dev(dev) {
+               pci_read_config_word(dev, PCI_COMMAND, &command);
+               for (idx = 0; idx < 6; idx++) {
+                       r = &dev->resource[idx];
+                       if (r->parent)          /* Already allocated */
+                               continue;
+                       if (!r->start)          /* Address not assigned */
+                               continue;
+                       if (r->flags & IORESOURCE_IO)
+                               disabled = !(command & PCI_COMMAND_IO);
+                       else
+                               disabled = !(command & PCI_COMMAND_MEMORY);
+                       if (pass == disabled) {
+                               DBG("PCI[%s]: Resource %08lx-%08lx"
+                                   " (f=%lx, d=%d, p=%d)\n",
+                                   pci_name(dev), r->start, r->end, r->flags,
+                                   disabled, pass);
+                               pr = pci_find_parent_resource(dev, r);
+                               if (!pr || request_resource(pr, r) < 0) {
+                                       printk(KERN_ERR "PCI:"
+                                              " Cannot allocate resource"
+                                              " region %d of device %s\n",
+                                              idx, pci_name(dev));
+                                       /* We'll assign a new address later */
+                                       r->end -= r->start;
+                                       r->start = 0;
+                               }
+                       }
+               }
+               if (!pass) {
+                       r = &dev->resource[PCI_ROM_RESOURCE];
+                       if (r->flags & IORESOURCE_ROM_ENABLE) {
+                               /* Turn the ROM off, leave the resource region,
+                                * but keep it unregistered. */
+                               u32 reg;
+                               DBG("PCI: Switching off ROM of %s\n",
+                                   pci_name(dev));
+                               r->flags &= ~IORESOURCE_ROM_ENABLE;
+                               pci_read_config_dword(
+                                       dev, dev->rom_base_reg, &reg);
+                               pci_write_config_dword(
+                                       dev, dev->rom_base_reg,
+                                       reg & ~PCI_ROM_ADDRESS_ENABLE);
+                       }
+               }
+       }
+}
+
+static int __init pcibios_assign_resources(void)
+{
+       struct pci_dev *dev = NULL;
+       struct resource *r, *pr;
+
+       if (!(pci_probe & PCI_ASSIGN_ROMS)) {
+               /* Try to use BIOS settings for ROMs, otherwise let
+                  pci_assign_unassigned_resources() allocate the new
+                  addresses. */
+               for_each_pci_dev(dev) {
+                       r = &dev->resource[PCI_ROM_RESOURCE];
+                       if (!r->flags || !r->start)
+                               continue;
+                       pr = pci_find_parent_resource(dev, r);
+                       if (!pr || request_resource(pr, r) < 0) {
+                               r->end -= r->start;
+                               r->start = 0;
+                       }
+               }
+       }
+
+       pci_assign_unassigned_resources();
+
+       return 0;
+}
+
+fs_initcall(pcibios_assign_resources);
+
+void __init pcibios_resource_survey(void)
+{
+       DBG("PCI: Allocating resources\n");
+       pcibios_allocate_bus_resources(&pci_root_buses);
+       pcibios_allocate_resources(0);
+       pcibios_allocate_resources(1);
+}
+
+int pcibios_enable_resources(struct pci_dev *dev, int mask)
+{
+       u16 cmd, old_cmd;
+       int idx;
+       struct resource *r;
+
+       pci_read_config_word(dev, PCI_COMMAND, &cmd);
+       old_cmd = cmd;
+
+       for (idx = 0; idx < 6; idx++) {
+               /* Only set up the requested stuff */
+               if (!(mask & (1 << idx)))
+                       continue;
+
+               r = &dev->resource[idx];
+
+               if (!r->start && r->end) {
+                       printk(KERN_ERR
+                              "PCI: Device %s not available because of"
+                              " resource collisions\n",
+                              pci_name(dev));
+                       return -EINVAL;
+               }
+
+               if (r->flags & IORESOURCE_IO)
+                       cmd |= PCI_COMMAND_IO;
+               if (r->flags & IORESOURCE_MEM)
+                       cmd |= PCI_COMMAND_MEMORY;
+       }
+
+       if (dev->resource[PCI_ROM_RESOURCE].start)
+               cmd |= PCI_COMMAND_MEMORY;
+
+       if (cmd != old_cmd)
+               pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+       return 0;
+}
+
+/*
+ *  If we set up a device for bus mastering, we need to check the latency
+ *  timer as certain crappy BIOSes forget to set it properly.
+ */
+unsigned int pcibios_max_latency = 255;
+
+void pcibios_set_master(struct pci_dev *dev)
+{
+       u8 lat;
+
+       pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+
+       if (lat < 16)
+               lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
+       else if (lat > pcibios_max_latency)
+               lat = pcibios_max_latency;
+       else
+               return;
+
+       pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+}
+
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+                       enum pci_mmap_state mmap_state, int write_combine)
+{
+       unsigned long prot;
+
+       /* Leave vm_pgoff as-is, the PCI space address is the physical
+        * address on this platform.
+        */
+       vma->vm_flags |= VM_LOCKED | VM_IO;
+
+       prot = pgprot_val(vma->vm_page_prot);
+       prot &= ~_PAGE_CACHE;
+       vma->vm_page_prot = __pgprot(prot);
+
+       /* Write-combine setting is ignored */
+       if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+                              vma->vm_end - vma->vm_start,
+                              vma->vm_page_prot))
+               return -EAGAIN;
+
+       return 0;
+}
diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.h b/arch/mn10300/unit-asb2305/pci-asb2305.h
new file mode 100644 (file)
index 0000000..84634fa
--- /dev/null
@@ -0,0 +1,82 @@
+/* ASB2305 Arch-specific PCI declarations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from: arch/i386/kernel/pci-i386.h: (c) 1999 Martin Mares <mj@ucw.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _PCI_ASB2305_H
+#define _PCI_ASB2305_H
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+#define PCI_PROBE_BIOS 1
+#define PCI_PROBE_CONF1 2
+#define PCI_PROBE_CONF2 4
+#define PCI_NO_SORT 0x100
+#define PCI_BIOS_SORT 0x200
+#define PCI_NO_CHECKS 0x400
+#define PCI_ASSIGN_ROMS 0x1000
+#define PCI_BIOS_IRQ_SCAN 0x2000
+
+extern unsigned int pci_probe;
+
+/* pci-asb2305.c */
+
+extern unsigned int pcibios_max_latency;
+
+extern void pcibios_resource_survey(void);
+extern int pcibios_enable_resources(struct pci_dev *dev, int mask);
+
+/* pci.c */
+
+extern int pcibios_last_bus;
+extern struct pci_bus *pci_root_bus;
+extern struct pci_ops *pci_root_ops;
+
+extern struct irq_routing_table *pcibios_get_irq_routing_table(void);
+extern int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
+
+/* pci-irq.c */
+
+struct irq_info {
+       u8 bus, devfn;                  /* Bus, device and function */
+       struct {
+               u8 link;                /* IRQ line ID, chipset dependent,
+                                        * 0=not routed */
+               u16 bitmap;             /* Available IRQs */
+       } __attribute__((packed)) irq[4];
+       u8 slot;                        /* Slot number, 0=onboard */
+       u8 rfu;
+} __attribute__((packed));
+
+struct irq_routing_table {
+       u32 signature;                  /* PIRQ_SIGNATURE should be here */
+       u16 version;                    /* PIRQ_VERSION */
+       u16 size;                       /* Table size in bytes */
+       u8 rtr_bus, rtr_devfn;          /* Where the interrupt router lies */
+       u16 exclusive_irqs;             /* IRQs devoted exclusively to PCI usage */
+       u16 rtr_vendor, rtr_device;     /* Vendor and device ID of interrupt router */
+       u32 miniport_data;              /* Crap */
+       u8 rfu[11];
+       u8 checksum;                    /* Modulo 256 checksum must give zero */
+       struct irq_info slots[0];
+} __attribute__((packed));
+
+extern unsigned int pcibios_irq_mask;
+
+extern void pcibios_irq_init(void);
+extern void pcibios_fixup_irqs(void);
+extern void pcibios_enable_irq(struct pci_dev *dev);
+
+#endif /* PCI_ASB2305_H */
diff --git a/arch/mn10300/unit-asb2305/pci-iomap.c b/arch/mn10300/unit-asb2305/pci-iomap.c
new file mode 100644 (file)
index 0000000..dbceae4
--- /dev/null
@@ -0,0 +1,31 @@
+/* ASB2305 PCI I/O mapping handler
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/pci.h>
+#include <linux/module.h>
+
+/*
+ * Create a virtual mapping cookie for a PCI BAR (memory or IO)
+ */
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
+{
+       unsigned long start = pci_resource_start(dev, bar);
+       unsigned long len = pci_resource_len(dev, bar);
+       unsigned long flags = pci_resource_flags(dev, bar);
+
+       if (!len || !start)
+               return NULL;
+
+       if ((flags & IORESOURCE_IO) || (flags & IORESOURCE_MEM))
+               return (void __iomem *) start;
+
+       return NULL;
+}
+EXPORT_SYMBOL(pci_iomap);
diff --git a/arch/mn10300/unit-asb2305/pci-irq.c b/arch/mn10300/unit-asb2305/pci-irq.c
new file mode 100644 (file)
index 0000000..58cfb44
--- /dev/null
@@ -0,0 +1,51 @@
+/* PCI IRQ routing on the MN103E010 based ASB2305
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ * This is simple: All PCI interrupts route through the CPU's XIRQ1 pin [IRQ 35]
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include "pci-asb2305.h"
+
+void __init pcibios_irq_init(void)
+{
+}
+
+void __init pcibios_fixup_irqs(void)
+{
+       struct pci_dev *dev = NULL;
+       u8 line, pin;
+
+       while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+               pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+               if (pin) {
+                       dev->irq = XIRQ1;
+                       pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
+                                             dev->irq);
+               }
+               pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line);
+       }
+}
+
+void __init pcibios_penalize_isa_irq(int irq)
+{
+}
+
+void pcibios_enable_irq(struct pci_dev *dev)
+{
+       pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+}
diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c
new file mode 100644 (file)
index 0000000..1a86425
--- /dev/null
@@ -0,0 +1,545 @@
+/* ASB2305 PCI support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from arch/i386/kernel/pci-pc.c
+ *     (c) 1999--2000 Martin Mares <mj@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include "pci-asb2305.h"
+
+unsigned int pci_probe = 1;
+
+int pcibios_last_bus = -1;
+struct pci_bus *pci_root_bus;
+struct pci_ops *pci_root_ops;
+
+/*
+ * Functions for accessing PCI configuration space
+ */
+
+#define CONFIG_CMD(bus, devfn, where) \
+       (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
+
+#define MEM_PAGING_REG (*(volatile __u32 *) 0xBFFFFFF4)
+#define CONFIG_ADDRESS (*(volatile __u32 *) 0xBFFFFFF8)
+#define CONFIG_DATAL(X)        (*(volatile __u32 *) 0xBFFFFFFC)
+#define CONFIG_DATAW(X)        (*(volatile __u16 *) (0xBFFFFFFC + ((X) & 2)))
+#define CONFIG_DATAB(X)        (*(volatile __u8  *) (0xBFFFFFFC + ((X) & 3)))
+
+#define BRIDGEREGB(X)  (*(volatile __u8  *) (0xBE040000 + (X)))
+#define BRIDGEREGW(X)  (*(volatile __u16 *) (0xBE040000 + (X)))
+#define BRIDGEREGL(X)  (*(volatile __u32 *) (0xBE040000 + (X)))
+
+static inline int __query(const struct pci_bus *bus, unsigned int devfn)
+{
+#if 0
+       return bus->number == 0 && (devfn == PCI_DEVFN(0, 0));
+       return bus->number == 1;
+       return bus->number == 0 &&
+               (devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(3, 0));
+#endif
+       return 1;
+}
+
+/*
+ * translate Linuxcentric addresses to PCI bus addresses
+ */
+void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+                            struct resource *res)
+{
+       if (res->flags & IORESOURCE_IO) {
+               region->start = (res->start & 0x00ffffff);
+               region->end   = (res->end   & 0x00ffffff);
+       }
+
+       if (res->flags & IORESOURCE_MEM) {
+               region->start = (res->start & 0x03ffffff) | MEM_PAGING_REG;
+               region->end   = (res->end   & 0x03ffffff) | MEM_PAGING_REG;
+       }
+
+#if 0
+       printk(KERN_DEBUG "RES->BUS: %lx-%lx => %lx-%lx\n",
+              res->start, res->end, region->start, region->end);
+#endif
+}
+EXPORT_SYMBOL(pcibios_resource_to_bus);
+
+/*
+ * translate PCI bus addresses to Linuxcentric addresses
+ */
+void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+                            struct pci_bus_region *region)
+{
+       if (res->flags & IORESOURCE_IO) {
+               res->start = (region->start & 0x00ffffff) | 0xbe000000;
+               res->end   = (region->end   & 0x00ffffff) | 0xbe000000;
+       }
+
+       if (res->flags & IORESOURCE_MEM) {
+               res->start = (region->start & 0x03ffffff) | 0xb8000000;
+               res->end   = (region->end   & 0x03ffffff) | 0xb8000000;
+       }
+
+#if 0
+       printk(KERN_INFO "BUS->RES: %lx-%lx => %lx-%lx\n",
+              region->start, region->end, res->start, res->end);
+#endif
+}
+EXPORT_SYMBOL(pcibios_bus_to_resource);
+
+/*
+ *
+ */
+static int pci_ampci_read_config_byte(struct pci_bus *bus, unsigned int devfn,
+                                     int where, u32 *_value)
+{
+       u32 rawval, value;
+
+       if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+               value = BRIDGEREGB(where);
+               __pcbdebug("=> %02hx", &BRIDGEREGL(where), value);
+       } else {
+               CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+               rawval = CONFIG_ADDRESS;
+               value = CONFIG_DATAB(where);
+               if (__query(bus, devfn))
+                       __pcidebug("=> %02hx", bus, devfn, where, value);
+       }
+
+       *_value = value;
+       return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_read_config_word(struct pci_bus *bus, unsigned int devfn,
+                                     int where, u32 *_value)
+{
+       u32 rawval, value;
+
+       if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+               value = BRIDGEREGW(where);
+               __pcbdebug("=> %04hx", &BRIDGEREGL(where), value);
+       } else {
+               CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+               rawval = CONFIG_ADDRESS;
+               value = CONFIG_DATAW(where);
+               if (__query(bus, devfn))
+                       __pcidebug("=> %04hx", bus, devfn, where, value);
+       }
+
+       *_value = value;
+       return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_read_config_dword(struct pci_bus *bus, unsigned int devfn,
+                                      int where, u32 *_value)
+{
+       u32 rawval, value;
+
+       if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+               value = BRIDGEREGL(where);
+               __pcbdebug("=> %08x", &BRIDGEREGL(where), value);
+       } else {
+               CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+               rawval = CONFIG_ADDRESS;
+               value = CONFIG_DATAL(where);
+               if (__query(bus, devfn))
+                       __pcidebug("=> %08x", bus, devfn, where, value);
+       }
+
+       *_value = value;
+       return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_write_config_byte(struct pci_bus *bus, unsigned int devfn,
+                                      int where, u8 value)
+{
+       u32 rawval;
+
+       if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+               __pcbdebug("<= %02x", &BRIDGEREGB(where), value);
+               BRIDGEREGB(where) = value;
+       } else {
+               if (bus->number == 0 &&
+                   (devfn == PCI_DEVFN(2, 0) && devfn == PCI_DEVFN(3, 0))
+                   )
+                       __pcidebug("<= %02x", bus, devfn, where, value);
+               CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+               rawval = CONFIG_ADDRESS;
+               CONFIG_DATAB(where) = value;
+       }
+       return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_write_config_word(struct pci_bus *bus, unsigned int devfn,
+                                      int where, u16 value)
+{
+       u32 rawval;
+
+       if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+               __pcbdebug("<= %04hx", &BRIDGEREGW(where), value);
+               BRIDGEREGW(where) = value;
+       } else {
+               if (__query(bus, devfn))
+                       __pcidebug("<= %04hx", bus, devfn, where, value);
+               CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+               rawval = CONFIG_ADDRESS;
+               CONFIG_DATAW(where) = value;
+       }
+       return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_write_config_dword(struct pci_bus *bus, unsigned int devfn,
+                                       int where, u32 value)
+{
+       u32 rawval;
+
+       if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+               __pcbdebug("<= %08x", &BRIDGEREGL(where), value);
+               BRIDGEREGL(where) = value;
+       } else {
+               if (__query(bus, devfn))
+                       __pcidebug("<= %08x", bus, devfn, where, value);
+               CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+               rawval = CONFIG_ADDRESS;
+               CONFIG_DATAL(where) = value;
+       }
+       return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_read_config(struct pci_bus *bus, unsigned int devfn,
+                                int where, int size, u32 *val)
+{
+       switch (size) {
+       case 1:
+               return pci_ampci_read_config_byte(bus, devfn, where, val);
+       case 2:
+               return pci_ampci_read_config_word(bus, devfn, where, val);
+       case 4:
+               return pci_ampci_read_config_dword(bus, devfn, where, val);
+       default:
+               BUG();
+               return -EOPNOTSUPP;
+       }
+}
+
+static int pci_ampci_write_config(struct pci_bus *bus, unsigned int devfn,
+                                 int where, int size, u32 val)
+{
+       switch (size) {
+       case 1:
+               return pci_ampci_write_config_byte(bus, devfn, where, val);
+       case 2:
+               return pci_ampci_write_config_word(bus, devfn, where, val);
+       case 4:
+               return pci_ampci_write_config_dword(bus, devfn, where, val);
+       default:
+               BUG();
+               return -EOPNOTSUPP;
+       }
+}
+
+static struct pci_ops pci_direct_ampci = {
+       pci_ampci_read_config,
+       pci_ampci_write_config,
+};
+
+/*
+ * Before we decide to use direct hardware access mechanisms, we try to do some
+ * trivial checks to ensure it at least _seems_ to be working -- we just test
+ * whether bus 00 contains a host bridge (this is similar to checking
+ * techniques used in XFree86, but ours should be more reliable since we
+ * attempt to make use of direct access hints provided by the PCI BIOS).
+ *
+ * This should be close to trivial, but it isn't, because there are buggy
+ * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
+ */
+static int __init pci_sanity_check(struct pci_ops *o)
+{
+       struct pci_bus bus;             /* Fake bus and device */
+       u32 x;
+
+       bus.number = 0;
+
+       if ((!o->read(&bus, 0, PCI_CLASS_DEVICE, 2, &x) &&
+            (x == PCI_CLASS_BRIDGE_HOST || x == PCI_CLASS_DISPLAY_VGA)) ||
+           (!o->read(&bus, 0, PCI_VENDOR_ID, 2, &x) &&
+            (x == PCI_VENDOR_ID_INTEL || x == PCI_VENDOR_ID_COMPAQ)))
+               return 1;
+
+       printk(KERN_ERROR "PCI: Sanity check failed\n");
+       return 0;
+}
+
+static int __init pci_check_direct(void)
+{
+       unsigned long flags;
+
+       local_irq_save(flags);
+
+       /*
+        * Check if access works.
+        */
+       if (pci_sanity_check(&pci_direct_ampci)) {
+               local_irq_restore(flags);
+               printk(KERN_INFO "PCI: Using configuration ampci\n");
+               request_mem_region(0xBE040000, 256, "AMPCI bridge");
+               request_mem_region(0xBFFFFFF4, 12, "PCI ampci");
+               return 0;
+       }
+
+       local_irq_restore(flags);
+       return -ENODEV;
+}
+
+static int __devinit is_valid_resource(struct pci_dev *dev, int idx)
+{
+       unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM;
+       struct resource *devr = &dev->resource[idx];
+
+       if (dev->bus) {
+               for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
+                       struct resource *busr = dev->bus->resource[i];
+
+                       if (!busr || (busr->flags ^ devr->flags) & type_mask)
+                               continue;
+
+                       if (devr->start &&
+                           devr->start >= busr->start &&
+                           devr->end <= busr->end)
+                               return 1;
+               }
+       }
+
+       return 0;
+}
+
+static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
+{
+       struct pci_bus_region region;
+       int i;
+       int limit;
+
+       if (dev->bus->number != 0)
+               return;
+
+       limit = (dev->hdr_type == PCI_HEADER_TYPE_NORMAL) ?
+               PCI_BRIDGE_RESOURCES : PCI_NUM_RESOURCES;
+
+       for (i = 0; i < limit; i++) {
+               if (!dev->resource[i].flags)
+                       continue;
+
+               region.start = dev->resource[i].start;
+               region.end = dev->resource[i].end;
+               pcibios_bus_to_resource(dev, &dev->resource[i], &region);
+               if (is_valid_resource(dev, i))
+                       pci_claim_resource(dev, i);
+       }
+}
+
+/*
+ *  Called after each bus is probed, but before its children
+ *  are examined.
+ */
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+       struct pci_dev *dev;
+
+       if (bus->self) {
+               pci_read_bridge_bases(bus);
+               pcibios_fixup_device_resources(bus->self);
+       }
+
+       list_for_each_entry(dev, &bus->devices, bus_list)
+               pcibios_fixup_device_resources(dev);
+}
+
+/*
+ * Initialization. Try all known PCI access methods. Note that we support
+ * using both PCI BIOS and direct access: in such cases, we use I/O ports
+ * to access config space, but we still keep BIOS order of cards to be
+ * compatible with 2.0.X. This should go away some day.
+ */
+static int __init pcibios_init(void)
+{
+       ioport_resource.start   = 0xA0000000;
+       ioport_resource.end     = 0xDFFFFFFF;
+       iomem_resource.start    = 0xA0000000;
+       iomem_resource.end      = 0xDFFFFFFF;
+
+       if (!pci_probe)
+               return 0;
+
+       if (pci_check_direct() < 0) {
+               printk(KERN_WARNING "PCI: No PCI bus detected\n");
+               return 0;
+       }
+
+       printk(KERN_INFO "PCI: Probing PCI hardware [mempage %08x]\n",
+              MEM_PAGING_REG);
+
+       {
+#if 0
+               static struct pci_bus am33_root_bus = {
+                       .children  = LIST_HEAD_INIT(am33_root_bus.children),
+                       .devices   = LIST_HEAD_INIT(am33_root_bus.devices),
+                       .number    = 0,
+                       .secondary = 0,
+                       .resource = { &ioport_resource, &iomem_resource },
+               };
+
+               am33_root_bus.ops = pci_root_ops;
+               list_add_tail(&am33_root_bus.node, &pci_root_buses);
+
+               am33_root_bus.subordinate = pci_do_scan_bus(0);
+
+               pci_root_bus = &am33_root_bus;
+#else
+               pci_root_bus = pci_scan_bus(0, &pci_direct_ampci, NULL);
+#endif
+       }
+
+       pcibios_irq_init();
+       pcibios_fixup_irqs();
+#if 0
+       pcibios_resource_survey();
+#endif
+       return 0;
+}
+
+arch_initcall(pcibios_init);
+
+char *__init pcibios_setup(char *str)
+{
+       if (!strcmp(str, "off")) {
+               pci_probe = 0;
+               return NULL;
+
+       } else if (!strncmp(str, "lastbus=", 8)) {
+               pcibios_last_bus = simple_strtol(str+8, NULL, 0);
+               return NULL;
+       }
+
+       return str;
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+       int err;
+
+       err = pcibios_enable_resources(dev, mask);
+       if (err == 0)
+               pcibios_enable_irq(dev);
+       return err;
+}
+
+/*
+ * disable the ethernet chipset
+ */
+static void __init unit_disable_pcnet(struct pci_bus *bus, struct pci_ops *o)
+{
+       u32 x;
+
+       bus->number = 0;
+
+       o->read (bus, PCI_DEVFN(2, 0), PCI_COMMAND,             2, &x);
+       x |= PCI_COMMAND_MASTER |
+               PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+               PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
+       o->write(bus, PCI_DEVFN(2, 0), PCI_COMMAND,             2, x);
+       o->read (bus, PCI_DEVFN(2, 0), PCI_COMMAND,             2, &x);
+       o->write(bus, PCI_DEVFN(2, 0), PCI_BASE_ADDRESS_0,      4, 0x00030001);
+       o->read (bus, PCI_DEVFN(2, 0), PCI_BASE_ADDRESS_0,      4, &x);
+
+#define RDP (*(volatile u32 *) 0xBE030010)
+#define RAP (*(volatile u32 *) 0xBE030014)
+#define __set_RAP(X) do { RAP = (X); x = RAP; } while (0)
+#define __set_RDP(X) do { RDP = (X); x = RDP; } while (0)
+#define __get_RDP() ({ RDP & 0xffff; })
+
+       __set_RAP(0);
+       __set_RDP(0x0004);      /* CSR0 = STOP */
+
+       __set_RAP(88);          /* check CSR88 indicates an Am79C973 */
+       BUG_ON(__get_RDP() != 0x5003);
+
+       for (x = 0; x < 100; x++)
+               asm volatile("nop");
+
+       __set_RDP(0x0004);      /* CSR0 = STOP */
+}
+
+/*
+ * initialise the unit hardware
+ */
+asmlinkage void __init unit_pci_init(void)
+{
+       struct pci_bus bus;             /* Fake bus and device */
+       struct pci_ops *o = &pci_direct_ampci;
+       u32 x;
+
+       set_intr_level(XIRQ1, GxICR_LEVEL_3);
+
+       memset(&bus, 0, sizeof(bus));
+
+       MEM_PAGING_REG = 0xE8000000;
+
+       /* we need to set up the bridge _now_ or we won't be able to access the
+        * PCI config registers
+        */
+       BRIDGEREGW(PCI_COMMAND) |=
+               PCI_COMMAND_SERR | PCI_COMMAND_PARITY |
+               PCI_COMMAND_MEMORY | PCI_COMMAND_IO | PCI_COMMAND_MASTER;
+       BRIDGEREGW(PCI_STATUS)          = 0xF800;
+       BRIDGEREGB(PCI_LATENCY_TIMER)   = 0x10;
+       BRIDGEREGL(PCI_BASE_ADDRESS_0)  = 0x80000000;
+       BRIDGEREGB(PCI_INTERRUPT_LINE)  = 1;
+       BRIDGEREGL(0x48)                = 0x98000000;   /* AMPCI base addr */
+       BRIDGEREGB(0x41)                = 0x00;         /* secondary bus
+                                                        * number */
+       BRIDGEREGB(0x42)                = 0x01;         /* subordinate bus
+                                                        * number */
+       BRIDGEREGB(0x44)                = 0x01;
+       BRIDGEREGL(0x50)                = 0x00000001;
+       BRIDGEREGL(0x58)                = 0x00001002;
+       BRIDGEREGL(0x5C)                = 0x00000011;
+
+       /* we also need to set up the PCI-PCI bridge */
+       bus.number = 0;
+
+       /* IO: 0x00000000-0x00020000 */
+       o->read (&bus, PCI_DEVFN(3, 0), PCI_COMMAND,            2, &x);
+       x |= PCI_COMMAND_MASTER |
+               PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+               PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
+       o->write(&bus, PCI_DEVFN(3, 0), PCI_COMMAND,            2, x);
+
+       o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE,            1, &x);
+       o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE_UPPER16,    4, &x);
+       o->read (&bus, PCI_DEVFN(3, 0), PCI_MEMORY_BASE,        4, &x);
+       o->read (&bus, PCI_DEVFN(3, 0), PCI_PREF_MEMORY_BASE,   4, &x);
+
+       o->write(&bus, PCI_DEVFN(3, 0), PCI_IO_BASE,            1, 0x01);
+       o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE,            1, &x);
+       o->write(&bus, PCI_DEVFN(3, 0), PCI_IO_BASE_UPPER16,    4, 0x00020000);
+       o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE_UPPER16,    4, &x);
+       o->write(&bus, PCI_DEVFN(3, 0), PCI_MEMORY_BASE,        4, 0xEBB0EA00);
+       o->read (&bus, PCI_DEVFN(3, 0), PCI_MEMORY_BASE,        4, &x);
+       o->write(&bus, PCI_DEVFN(3, 0), PCI_PREF_MEMORY_BASE,   4, 0xE9F0E800);
+       o->read (&bus, PCI_DEVFN(3, 0), PCI_PREF_MEMORY_BASE,   4, &x);
+
+       unit_disable_pcnet(&bus, o);
+}
diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c
new file mode 100644 (file)
index 0000000..6a35241
--- /dev/null
@@ -0,0 +1,61 @@
+/* ASB2305 Initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/processor.h>
+#include <asm/cpu/intctl-regs.h>
+#include <asm/cpu/rtc-regs.h>
+#include <asm/cpu/serial-regs.h>
+#include <asm/unit/serial.h>
+
+/*
+ * initialise some of the unit hardware before gdbstub is set up
+ */
+asmlinkage void __init unit_init(void)
+{
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+       /* set the 16550 interrupt line to level 3 if not being used for GDB */
+       set_intr_level(XIRQ0, GxICR_LEVEL_3);
+#endif
+}
+
+/*
+ * initialise the rest of the unit hardware after gdbstub is ready
+ */
+void __init unit_setup(void)
+{
+#ifdef CONFIG_PCI
+       unit_pci_init();
+#endif
+}
+
+/*
+ * initialise the external interrupts used by a unit of this type
+ */
+void __init unit_init_IRQ(void)
+{
+       unsigned int extnum;
+
+       for (extnum = 0; extnum < NR_XIRQS; extnum++) {
+               switch (GET_XIRQ_TRIGGER(extnum)) {
+               case XIRQ_TRIGGER_HILEVEL:
+               case XIRQ_TRIGGER_LOWLEVEL:
+                       set_irq_handler(XIRQ2IRQ(extnum), handle_level_irq);
+                       break;
+               default:
+                       break;
+               }
+       }
+}
index f32e031dcb27f53a04f1c774b283ce2381dadd4d..708c5ae13b24f33cb6b8b323996c2332d84520b7 100644 (file)
@@ -1,6 +1,4 @@
 /*
- * $Id: analog.c,v 1.68 2002/01/22 20:18:32 vojtech Exp $
- *
  *  Copyright (c) 1996-2001 Vojtech Pavlik
  */
 
@@ -164,6 +162,10 @@ static unsigned int get_time_pit(void)
 #define GET_TIME(x)    do { x = get_cycles(); } while (0)
 #define DELTA(x,y)     ((y)-(x))
 #define TIME_NAME      "PCC"
+#elif defined(CONFIG_MN10300)
+#define GET_TIME(x)    do { x = get_cycles(); } while (0)
+#define DELTA(x, y)    ((x) - (y))
+#define TIME_NAME      "TSC"
 #else
 #define FAKE_TIME
 static unsigned long analog_faketime = 0;
index 9cc25fd80b605c742411b3042c27808976199453..50c2b60e1fee42e43661f1b9b544a7662053a593 100644 (file)
@@ -879,7 +879,8 @@ config SMC91X
        tristate "SMC 91C9x/91C1xxx support"
        select CRC32
        select MII
-       depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BLACKFIN
+       depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
+               SOC_AU1X00 || BLACKFIN || MN10300
        help
          This is a driver for SMC's 91x series of Ethernet chipsets,
          including the SMC91C94 and the SMC91C111. Say Y if you want it
index 271c28dc9baae1057681ce326ea4bc81e50e8756..51d4134b37b196307bf98480fd786e64d983e897 100644 (file)
@@ -450,8 +450,20 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r,
 #define SMC_outsl(a, r, p, l)  writesl((a) + (r), p, l)
 #define SMC_IRQ_FLAGS          (-1)    /* from resource */
 
+#elif defined(CONFIG_MN10300)
+
+/*
+ * MN10300/AM33 configuration
+ */
+
+#include <asm/unit/smc91111.h>
+
 #else
 
+/*
+ * Default configuration
+ */
+
 #define SMC_CAN_USE_8BIT       1
 #define SMC_CAN_USE_16BIT      1
 #define SMC_CAN_USE_32BIT      1
index d449b150930ea7aedeb0b8ad0cb43a1140575391..b7bcdcc5c724e0f441faa4bbb94cb53d06a2e448 100644 (file)
@@ -35,7 +35,8 @@ if PARPORT
 
 config PARPORT_PC
        tristate "PC-style hardware"
-       depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && (!M68K || ISA)
+       depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \
+               (!M68K || ISA) && !MN10300
        ---help---
          You should say Y here if you have a PC-style parallel port. All
          IBM PC compatible computers and some Alphas have PC-style
index 9f04d17576d6fb37e1f58368dfa5326264369208..4d1ce2e7361e41cfee2b35b5da3025f7641e2e4b 100644 (file)
@@ -38,6 +38,7 @@ obj-$(CONFIG_PPC32) += setup-irq.o
 obj-$(CONFIG_PPC) += setup-bus.o
 obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
 obj-$(CONFIG_X86_VISWS) += setup-irq.o
+obj-$(CONFIG_MN10300) += setup-bus.o
 
 #
 # ACPI Related PCI FW Functions
index 2b53d1f5628107b65d559e97cf5fc8007f41a6df..06f87b04f207750074a5253cbf991df7405a9071 100644 (file)
@@ -6,7 +6,7 @@ menu "Console display driver support"
 
 config VGA_CONSOLE
        bool "VGA text console" if EMBEDDED || !X86
-       depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN && !AVR32
+       depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN && !AVR32 && !MN10300
        default y
        help
          Saying Y here will allow you to use Linux in text mode through a
diff --git a/include/asm-mn10300/.gitignore b/include/asm-mn10300/.gitignore
new file mode 100644 (file)
index 0000000..0f87ba7
--- /dev/null
@@ -0,0 +1,2 @@
+proc
+unit
diff --git a/include/asm-mn10300/Kbuild b/include/asm-mn10300/Kbuild
new file mode 100644 (file)
index 0000000..79384c5
--- /dev/null
@@ -0,0 +1,5 @@
+include include/asm-generic/Kbuild.asm
+
+unifdef-y += termios.h
+unifdef-y += ptrace.h
+unifdef-y += page.h
diff --git a/include/asm-mn10300/atomic.h b/include/asm-mn10300/atomic.h
new file mode 100644 (file)
index 0000000..27c9690
--- /dev/null
@@ -0,0 +1,166 @@
+/* MN10300 Atomic counter operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_ATOMIC_H
+#define _ASM_ATOMIC_H
+
+#ifdef CONFIG_SMP
+#error not SMP safe
+#endif
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+/*
+ * Make sure gcc doesn't try to be clever and move things around
+ * on us. We need to use _exactly_ the address the user gave us,
+ * not some alias that contains the same information.
+ */
+typedef struct {
+       int     counter;
+} atomic_t;
+
+#define ATOMIC_INIT(i) { (i) }
+
+#ifdef __KERNEL__
+
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.  Note that the guaranteed
+ * useful range of an atomic_t is only 24 bits.
+ */
+#define atomic_read(v) ((v)->counter)
+
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.  Note that the guaranteed
+ * useful range of an atomic_t is only 24 bits.
+ */
+#define atomic_set(v, i) (((v)->counter) = (i))
+
+#include <asm/system.h>
+
+/**
+ * atomic_add_return - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v and returns the result
+ * Note that the guaranteed useful range of an atomic_t is only 24 bits.
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+       unsigned long flags;
+       int temp;
+
+       local_irq_save(flags);
+       temp = v->counter;
+       temp += i;
+       v->counter = temp;
+       local_irq_restore(flags);
+
+       return temp;
+}
+
+/**
+ * atomic_sub_return - subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns the result
+ * Note that the guaranteed useful range of an atomic_t is only 24 bits.
+ */
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+       unsigned long flags;
+       int temp;
+
+       local_irq_save(flags);
+       temp = v->counter;
+       temp -= i;
+       v->counter = temp;
+       local_irq_restore(flags);
+
+       return temp;
+}
+
+static inline int atomic_add_negative(int i, atomic_t *v)
+{
+       return atomic_add_return(i, v) < 0;
+}
+
+static inline void atomic_add(int i, atomic_t *v)
+{
+       atomic_add_return(i, v);
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+       atomic_sub_return(i, v);
+}
+
+static inline void atomic_inc(atomic_t *v)
+{
+       atomic_add_return(1, v);
+}
+
+static inline void atomic_dec(atomic_t *v)
+{
+       atomic_sub_return(1, v);
+}
+
+#define atomic_dec_return(v)           atomic_sub_return(1, (v))
+#define atomic_inc_return(v)           atomic_add_return(1, (v))
+
+#define atomic_sub_and_test(i, v)      (atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v)         (atomic_sub_return(1, (v)) == 0)
+#define atomic_inc_and_test(v)         (atomic_add_return(1, (v)) == 0)
+
+#define atomic_add_unless(v, a, u)                             \
+({                                                             \
+       int c, old;                                             \
+       c = atomic_read(v);                                     \
+       while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \
+               c = old;                                        \
+       c != (u);                                               \
+})
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+       unsigned long flags;
+
+       mask = ~mask;
+       local_irq_save(flags);
+       *addr &= mask;
+       local_irq_restore(flags);
+}
+
+#define atomic_xchg(ptr, v)            (xchg(&(ptr)->counter, (v)))
+#define atomic_cmpxchg(v, old, new)    (cmpxchg(&((v)->counter), (old), (new)))
+
+/* Atomic operations are already serializing on MN10300??? */
+#define smp_mb__before_atomic_dec()    barrier()
+#define smp_mb__after_atomic_dec()     barrier()
+#define smp_mb__before_atomic_inc()    barrier()
+#define smp_mb__after_atomic_inc()     barrier()
+
+#include <asm-generic/atomic.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_ATOMIC_H */
diff --git a/include/asm-mn10300/auxvec.h b/include/asm-mn10300/auxvec.h
new file mode 100644 (file)
index 0000000..4fdb60b
--- /dev/null
@@ -0,0 +1,4 @@
+#ifndef _ASM_AUXVEC_H
+#define _ASM_AUXVEC_H
+
+#endif
diff --git a/include/asm-mn10300/bitops.h b/include/asm-mn10300/bitops.h
new file mode 100644 (file)
index 0000000..cc6d40c
--- /dev/null
@@ -0,0 +1,229 @@
+/* MN10300 bit operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ * These have to be done with inline assembly: that way the bit-setting
+ * is guaranteed to be atomic. All bit operations return 0 if the bit
+ * was cleared before the operation and != 0 if it was not.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+#ifndef __ASM_BITOPS_H
+#define __ASM_BITOPS_H
+
+#include <asm/cpu-regs.h>
+
+#define smp_mb__before_clear_bit()     barrier()
+#define smp_mb__after_clear_bit()      barrier()
+
+/*
+ * set bit
+ */
+#define __set_bit(nr, addr)                                    \
+({                                                             \
+       volatile unsigned char *_a = (unsigned char *)(addr);   \
+       const unsigned shift = (nr) & 7;                        \
+       _a += (nr) >> 3;                                        \
+                                                               \
+       asm volatile("bset %2,(%1) # set_bit reg"               \
+                    : "=m"(*_a)                                \
+                    : "a"(_a), "d"(1 << shift),  "m"(*_a)      \
+                    : "memory", "cc");                         \
+})
+
+#define set_bit(nr, addr) __set_bit((nr), (addr))
+
+/*
+ * clear bit
+ */
+#define ___clear_bit(nr, addr)                                 \
+({                                                             \
+       volatile unsigned char *_a = (unsigned char *)(addr);   \
+       const unsigned shift = (nr) & 7;                        \
+       _a += (nr) >> 3;                                        \
+                                                               \
+       asm volatile("bclr %2,(%1) # clear_bit reg"             \
+                    : "=m"(*_a)                                \
+                    : "a"(_a), "d"(1 << shift), "m"(*_a)       \
+                    : "memory", "cc");                         \
+})
+
+#define clear_bit(nr, addr) ___clear_bit((nr), (addr))
+
+
+static inline void __clear_bit(int nr, volatile void *addr)
+{
+       unsigned int *a = (unsigned int *) addr;
+       int mask;
+
+       a += nr >> 5;
+       mask = 1 << (nr & 0x1f);
+       *a &= ~mask;
+}
+
+/*
+ * test bit
+ */
+static inline int test_bit(int nr, const volatile void *addr)
+{
+       return 1UL & (((const unsigned int *) addr)[nr >> 5] >> (nr & 31));
+}
+
+/*
+ * change bit
+ */
+static inline void __change_bit(int nr, volatile void *addr)
+{
+       int     mask;
+       unsigned int *a = (unsigned int *) addr;
+
+       a += nr >> 5;
+       mask = 1 << (nr & 0x1f);
+       *a ^= mask;
+}
+
+extern void change_bit(int nr, volatile void *addr);
+
+/*
+ * test and set bit
+ */
+#define __test_and_set_bit(nr,addr)                            \
+({                                                             \
+       volatile unsigned char *_a = (unsigned char *)(addr);   \
+       const unsigned shift = (nr) & 7;                        \
+       unsigned epsw;                                          \
+       _a += (nr) >> 3;                                        \
+                                                               \
+       asm volatile("bset %3,(%2) # test_set_bit reg\n"        \
+                    "mov epsw,%1"                              \
+                    : "=m"(*_a), "=d"(epsw)                    \
+                    : "a"(_a), "d"(1 << shift), "m"(*_a)       \
+                    : "memory", "cc");                         \
+                                                               \
+       !(epsw & EPSW_FLAG_Z);                                  \
+})
+
+#define test_and_set_bit(nr, addr) __test_and_set_bit((nr), (addr))
+
+/*
+ * test and clear bit
+ */
+#define __test_and_clear_bit(nr, addr)                         \
+({                                                             \
+        volatile unsigned char *_a = (unsigned char *)(addr);  \
+       const unsigned shift = (nr) & 7;                        \
+       unsigned epsw;                                          \
+       _a += (nr) >> 3;                                        \
+                                                               \
+       asm volatile("bclr %3,(%2) # test_clear_bit reg\n"      \
+                    "mov epsw,%1"                              \
+                    : "=m"(*_a), "=d"(epsw)                    \
+                    : "a"(_a), "d"(1 << shift), "m"(*_a)       \
+                    : "memory", "cc");                         \
+                                                               \
+       !(epsw & EPSW_FLAG_Z);                                  \
+})
+
+#define test_and_clear_bit(nr, addr) __test_and_clear_bit((nr), (addr))
+
+/*
+ * test and change bit
+ */
+static inline int __test_and_change_bit(int nr, volatile void *addr)
+{
+       int     mask, retval;
+       unsigned int *a = (unsigned int *)addr;
+
+       a += nr >> 5;
+       mask = 1 << (nr & 0x1f);
+       retval = (mask & *a) != 0;
+       *a ^= mask;
+
+       return retval;
+}
+
+extern int test_and_change_bit(int nr, volatile void *addr);
+
+#include <asm-generic/bitops/lock.h>
+
+#ifdef __KERNEL__
+
+/**
+ * __ffs - find first bit set
+ * @x: the word to search
+ *
+ * - return 31..0 to indicate bit 31..0 most least significant bit set
+ * - if no bits are set in x, the result is undefined
+ */
+static inline __attribute__((const))
+unsigned long __ffs(unsigned long x)
+{
+       int bit;
+       asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x));
+       return bit;
+}
+
+/*
+ * special slimline version of fls() for calculating ilog2_u32()
+ * - note: no protection against n == 0
+ */
+static inline __attribute__((const))
+int __ilog2_u32(u32 n)
+{
+       int bit;
+       asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n));
+       return bit;
+}
+
+/**
+ * fls - find last bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as ffs:
+ * - return 32..1 to indicate bit 31..0 most significant bit set
+ * - return 0 to indicate no bits set
+ */
+static inline __attribute__((const))
+int fls(int x)
+{
+       return (x != 0) ? __ilog2_u32(x) + 1 : 0;
+}
+
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * - return 32..1 to indicate bit 31..0 most least significant bit set
+ * - return 0 to indicate no bits set
+ */
+static inline __attribute__((const))
+int ffs(int x)
+{
+       /* Note: (x & -x) gives us a mask that is the least significant
+        * (rightmost) 1-bit of the value in x.
+        */
+       return fls(x & -x);
+}
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+
+#define ext2_set_bit_atomic(lock, nr, addr) \
+       test_and_set_bit((nr) ^ 0x18, (addr))
+#define ext2_clear_bit_atomic(lock, nr, addr) \
+       test_and_clear_bit((nr) ^ 0x18, (addr))
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/minix-le.h>
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_BITOPS_H */
diff --git a/include/asm-mn10300/bug.h b/include/asm-mn10300/bug.h
new file mode 100644 (file)
index 0000000..4fcf338
--- /dev/null
@@ -0,0 +1,35 @@
+/* MN10300 Kernel bug reporting
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_BUG_H
+#define _ASM_BUG_H
+
+/*
+ * Tell the user there is some problem.
+ */
+#define _debug_bug_trap()                                      \
+do {                                                           \
+       asm volatile(                                           \
+               "       syscall 15                      \n"     \
+               "0:                                     \n"     \
+               "       .section __bug_table,\"a\"      \n"     \
+               "       .long 0b,%0,%1                  \n"     \
+               "       .previous                       \n"     \
+               :                                               \
+               : "i"(__FILE__), "i"(__LINE__)                  \
+               );                                              \
+} while (0)
+
+#define BUG() _debug_bug_trap()
+
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif /* _ASM_BUG_H */
diff --git a/include/asm-mn10300/bugs.h b/include/asm-mn10300/bugs.h
new file mode 100644 (file)
index 0000000..31c8bc5
--- /dev/null
@@ -0,0 +1,20 @@
+/* MN10300 Checks for architecture-dependent bugs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_BUGS_H
+#define _ASM_BUGS_H
+
+#include <asm/processor.h>
+
+static inline void __init check_bugs(void)
+{
+}
+
+#endif /* _ASM_BUGS_H */
diff --git a/include/asm-mn10300/busctl-regs.h b/include/asm-mn10300/busctl-regs.h
new file mode 100644 (file)
index 0000000..1632aef
--- /dev/null
@@ -0,0 +1,151 @@
+/* AM33v2 on-board bus controller registers
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_BUSCTL_REGS_H
+#define _ASM_BUSCTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* bus controller registers */
+#define BCCR                   __SYSREG(0xc0002000, u32)       /* bus controller control reg */
+#define BCCR_B0AD              0x00000003      /* block 0 (80000000-83ffffff) bus allocation */
+#define BCCR_B1AD              0x0000000c      /* block 1 (84000000-87ffffff) bus allocation */
+#define BCCR_B2AD              0x00000030      /* block 2 (88000000-8bffffff) bus allocation */
+#define BCCR_B3AD              0x000000c0      /* block 3 (8c000000-8fffffff) bus allocation */
+#define BCCR_B4AD              0x00000300      /* block 4 (90000000-93ffffff) bus allocation */
+#define BCCR_B5AD              0x00000c00      /* block 5 (94000000-97ffffff) bus allocation */
+#define BCCR_B6AD              0x00003000      /* block 6 (98000000-9bffffff) bus allocation */
+#define BCCR_B7AD              0x0000c000      /* block 7 (9c000000-9fffffff) bus allocation */
+#define BCCR_BxAD_EXBUS                0x0             /* - direct to system bus controller */
+#define BCCR_BxAD_OPEXBUS      0x1             /* - direct to memory bus controller */
+#define BCCR_BxAD_OCMBUS       0x2             /* - direct to on chip memory */
+#define BCCR_API               0x00070000      /* bus arbitration priority */
+#define BCCR_API_DMACICD       0x00000000      /* - DMA > CI > CD */
+#define BCCR_API_DMACDCI       0x00010000      /* - DMA > CD > CI */
+#define BCCR_API_CICDDMA       0x00020000      /* - CI > CD > DMA */
+#define BCCR_API_CDCIDMA       0x00030000      /* - CD > CI > DMA */
+#define BCCR_API_ROUNDROBIN    0x00040000      /* - round robin */
+#define BCCR_BEPRI_DMACICD     0x00c00000      /* bus error address priority */
+#define BCCR_BEPRI_DMACDCI     0x00000000      /* - DMA > CI > CD */
+#define BCCR_BEPRI_CICDDMA     0x00400000      /* - DMA > CD > CI */
+#define BCCR_BEPRI_CDCIDMA     0x00800000      /* - CI > CD > DMA */
+#define BCCR_BEPRI             0x00c00000      /* - CD > CI > DMA */
+#define BCCR_TMON              0x03000000      /* timeout value settings */
+#define BCCR_TMON_16IOCLK      0x00000000      /* - 16 IOCLK cycles */
+#define BCCR_TMON_256IOCLK     0x01000000      /* - 256 IOCLK cycles */
+#define BCCR_TMON_4096IOCLK    0x02000000      /* - 4096 IOCLK cycles */
+#define BCCR_TMON_65536IOCLK   0x03000000      /* - 65536 IOCLK cycles */
+#define BCCR_TMOE              0x10000000      /* timeout detection enable */
+
+#define BCBERR                 __SYSREG(0xc0002010, u32)       /* bus error source reg */
+#define BCBERR_BESB            0x0000001f      /* erroneous access destination space */
+#define BCBERR_BESB_MON                0x00000001      /* - monitor space */
+#define BCBERR_BESB_IO         0x00000002      /* - IO bus */
+#define BCBERR_BESB_EX         0x00000004      /* - EX bus */
+#define BCBERR_BESB_OPEX       0x00000008      /* - OpEX bus */
+#define BCBERR_BESB_OCM                0x00000010      /* - on chip memory */
+#define BCBERR_BERW            0x00000100      /* type of access */
+#define BCBERR_BERW_WRITE      0x00000000      /* - write */
+#define BCBERR_BERW_READ       0x00000100      /* - read */
+#define BCBERR_BESD            0x00000200      /* error detector */
+#define BCBERR_BESD_BCU                0x00000000      /* - BCU detected error */
+#define BCBERR_BESD_SLAVE_BUS  0x00000200      /* - slave bus detected error */
+#define BCBERR_BEBST           0x00000400      /* type of access */
+#define BCBERR_BEBST_SINGLE    0x00000000      /* - single */
+#define BCBERR_BEBST_BURST     0x00000400      /* - burst */
+#define BCBERR_BEME            0x00000800      /* multiple bus error flag */
+#define BCBERR_BEMR            0x00007000      /* master bus that caused the error */
+#define BCBERR_BEMR_NOERROR    0x00000000      /* - no error */
+#define BCBERR_BEMR_CI         0x00001000      /* - CPU instruction fetch bus caused error */
+#define BCBERR_BEMR_CD         0x00002000      /* - CPU data bus caused error */
+#define BCBERR_BEMR_DMA                0x00004000      /* - DMA bus caused error */
+
+#define BCBEAR                 __SYSREGC(0xc0002020, u32)      /* bus error address reg */
+
+/* system bus controller registers */
+#define SBBASE(X)              __SYSREG(0xd8c00100 + (X) * 0x10, u32)  /* SBC base addr regs */
+#define SBBASE_BE              0x00000001      /* bank enable */
+#define SBBASE_BAM             0x0000fffe      /* bank address mask [31:17] */
+#define SBBASE_BBA             0xfffe0000      /* bank base address [31:17] */
+
+#define SBCNTRL0(X)            __SYSREG(0xd8c00200 + (X) * 0x10, u32)  /* SBC bank ctrl0 regs */
+#define SBCNTRL0_WEH           0x00000f00      /* write enable hold */
+#define SBCNTRL0_REH           0x0000f000      /* read enable hold */
+#define SBCNTRL0_RWH           0x000f0000      /* SRW signal hold */
+#define SBCNTRL0_CSH           0x00f00000      /* chip select hold */
+#define SBCNTRL0_DAH           0x0f000000      /* data hold */
+#define SBCNTRL0_ADH           0xf0000000      /* address hold */
+
+#define SBCNTRL1(X)            __SYSREG(0xd8c00204 + (X) * 0x10, u32)  /* SBC bank ctrl1 regs */
+#define SBCNTRL1_WED           0x00000f00      /* write enable delay */
+#define SBCNTRL1_RED           0x0000f000      /* read enable delay */
+#define SBCNTRL1_RWD           0x000f0000      /* SRW signal delay */
+#define SBCNTRL1_ASW           0x00f00000      /* address strobe width */
+#define SBCNTRL1_CSD           0x0f000000      /* chip select delay */
+#define SBCNTRL1_ASD           0xf0000000      /* address strobe delay */
+
+#define SBCNTRL2(X)            __SYSREG(0xd8c00208 + (X) * 0x10, u32)  /* SBC bank ctrl2 regs */
+#define SBCNTRL2_WC            0x000000ff      /* wait count */
+#define SBCNTRL2_BWC           0x00000f00      /* burst wait count */
+#define SBCNTRL2_WM            0x01000000      /* wait mode setting */
+#define SBCNTRL2_WM_FIXEDWAIT  0x00000000      /* - fixed wait access */
+#define SBCNTRL2_WM_HANDSHAKE  0x01000000      /* - handshake access */
+#define SBCNTRL2_BM            0x02000000      /* bus synchronisation mode */
+#define SBCNTRL2_BM_SYNC       0x00000000      /* - synchronous mode */
+#define SBCNTRL2_BM_ASYNC      0x02000000      /* - asynchronous mode */
+#define SBCNTRL2_BW            0x04000000      /* bus width */
+#define SBCNTRL2_BW_32         0x00000000      /* - 32 bits */
+#define SBCNTRL2_BW_16         0x04000000      /* - 16 bits */
+#define SBCNTRL2_RWINV         0x08000000      /* R/W signal invert polarity */
+#define SBCNTRL2_RWINV_NORM    0x00000000      /* - normal (read high) */
+#define SBCNTRL2_RWINV_INV     0x08000000      /* - inverted (read low) */
+#define SBCNTRL2_BT            0x70000000      /* bus type setting */
+#define SBCNTRL2_BT_SRAM       0x00000000      /* - SRAM interface */
+#define SBCNTRL2_BT_ADMUX      0x00000000      /* - addr/data multiplexed interface */
+#define SBCNTRL2_BT_BROM       0x00000000      /* - burst ROM interface */
+#define SBCNTRL2_BTSE          0x80000000      /* burst enable */
+
+/* memory bus controller */
+#define SDBASE(X)              __SYSREG(0xda000008 + (X) * 0x4, u32)   /* MBC base addr regs */
+#define SDBASE_CE              0x00000001      /* chip enable */
+#define SDBASE_CBAM            0x0000fff0      /* chip base address mask [31:20] */
+#define SDBASE_CBAM_SHIFT      16
+#define SDBASE_CBA             0xfff00000      /* chip base address [31:20] */
+
+#define SDRAMBUS               __SYSREG(0xda000000, u32)       /* bus mode control reg */
+#define SDRAMBUS_REFEN         0x00000004      /* refresh enable */
+#define SDRAMBUS_TRC           0x00000018      /* refresh command delay time */
+#define SDRAMBUS_BSTPT         0x00000020      /* burst stop command enable */
+#define SDRAMBUS_PONSEQ                0x00000040      /* power on sequence */
+#define SDRAMBUS_SELFREQ       0x00000080      /* self-refresh mode request */
+#define SDRAMBUS_SELFON                0x00000100      /* self-refresh mode on */
+#define SDRAMBUS_SIZE          0x00030000      /* SDRAM size */
+#define SDRAMBUS_SIZE_64Mbit   0x00010000      /* 64Mbit SDRAM (x16) */
+#define SDRAMBUS_SIZE_128Mbit  0x00020000      /* 128Mbit SDRAM (x16) */
+#define SDRAMBUS_SIZE_256Mbit  0x00030000      /* 256Mbit SDRAM (x16) */
+#define SDRAMBUS_TRASWAIT      0x000c0000      /* row address precharge command cycle number */
+#define SDRAMBUS_REFNUM                0x00300000      /* refresh command number */
+#define SDRAMBUS_BSTWAIT       0x00c00000      /* burst stop command cycle */
+#define SDRAMBUS_SETWAIT       0x03000000      /* mode register setting command cycle */
+#define SDRAMBUS_PREWAIT       0x0c000000      /* precharge command cycle */
+#define SDRAMBUS_RASLATE       0x30000000      /* RAS latency */
+#define SDRAMBUS_CASLATE       0xc0000000      /* CAS latency */
+
+#define SDREFCNT               __SYSREG(0xda000004, u32)       /* refresh period reg */
+#define SDREFCNT_PERI          0x00000fff      /* refresh period */
+
+#define SDSHDW                 __SYSREG(0xda000010, u32)       /* test reg */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_BUSCTL_REGS_H */
diff --git a/include/asm-mn10300/byteorder.h b/include/asm-mn10300/byteorder.h
new file mode 100644 (file)
index 0000000..3c993cc
--- /dev/null
@@ -0,0 +1,46 @@
+/* MN10300 Byte-order primitive construction
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_BYTEORDER_H
+#define _ASM_BYTEORDER_H
+
+#include <asm/types.h>
+
+#ifdef __GNUC__
+
+static inline __attribute__((const))
+__u32 ___arch__swab32(__u32 x)
+{
+       __u32 ret;
+       asm("swap %1,%0" : "=r" (ret) : "r" (x));
+       return ret;
+}
+
+static inline __attribute__((const))
+__u16 ___arch__swab16(__u16 x)
+{
+       __u16 ret;
+       asm("swaph %1,%0" : "=r" (ret) : "r" (x));
+       return ret;
+}
+
+#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch__swab16(x) ___arch__swab16(x)
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _ASM_BYTEORDER_H */
diff --git a/include/asm-mn10300/cache.h b/include/asm-mn10300/cache.h
new file mode 100644 (file)
index 0000000..9e01122
--- /dev/null
@@ -0,0 +1,54 @@
+/* MN10300 cache management registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CACHE_H
+#define _ASM_CACHE_H
+
+#include <asm/cpu-regs.h>
+#include <asm/proc/cache.h>
+
+#ifndef __ASSEMBLY__
+#define L1_CACHE_DISPARITY     (L1_CACHE_NENTRIES * L1_CACHE_BYTES)
+#else
+#define L1_CACHE_DISPARITY     L1_CACHE_NENTRIES * L1_CACHE_BYTES
+#endif
+
+/* data cache purge registers
+ * - read from the register to unconditionally purge that cache line
+ * - write address & 0xffffff00 to conditionally purge that cache line
+ *   - clear LSB to request invalidation as well
+ */
+#define DCACHE_PURGE(WAY, ENTRY) \
+       __SYSREG(0xc8400000 + (WAY) * L1_CACHE_WAYDISP + \
+                (ENTRY) * L1_CACHE_BYTES, u32)
+
+#define DCACHE_PURGE_WAY0(ENTRY) \
+       __SYSREG(0xc8400000 + 0 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY1(ENTRY) \
+       __SYSREG(0xc8400000 + 1 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY2(ENTRY) \
+       __SYSREG(0xc8400000 + 2 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY3(ENTRY) \
+       __SYSREG(0xc8400000 + 3 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+
+/* instruction cache access registers */
+#define ICACHE_DATA(WAY, ENTRY, OFF) \
+       __SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32)
+#define ICACHE_TAG(WAY, ENTRY)  \
+       __SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32)
+
+/* instruction cache access registers */
+#define DCACHE_DATA(WAY, ENTRY, OFF) \
+       __SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32)
+#define DCACHE_TAG(WAY, ENTRY)  \
+       __SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32)
+
+#endif /* _ASM_CACHE_H */
diff --git a/include/asm-mn10300/cacheflush.h b/include/asm-mn10300/cacheflush.h
new file mode 100644 (file)
index 0000000..2db746a
--- /dev/null
@@ -0,0 +1,116 @@
+/* MN10300 Cache flushing
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CACHEFLUSH_H
+#define _ASM_CACHEFLUSH_H
+
+#ifndef __ASSEMBLY__
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+
+/*
+ * virtually-indexed cache managment (our cache is physically indexed)
+ */
+#define flush_cache_all()                      do {} while (0)
+#define flush_cache_mm(mm)                     do {} while (0)
+#define flush_cache_dup_mm(mm)                 do {} while (0)
+#define flush_cache_range(mm, start, end)      do {} while (0)
+#define flush_cache_page(vma, vmaddr, pfn)     do {} while (0)
+#define flush_cache_vmap(start, end)           do {} while (0)
+#define flush_cache_vunmap(start, end)         do {} while (0)
+#define flush_dcache_page(page)                        do {} while (0)
+#define flush_dcache_mmap_lock(mapping)                do {} while (0)
+#define flush_dcache_mmap_unlock(mapping)      do {} while (0)
+
+/*
+ * physically-indexed cache managment
+ */
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg);
+
+#else
+
+#define flush_icache_range(start, end)         do {} while (0)
+#define flush_icache_page(vma, pg)             do {} while (0)
+
+#endif
+
+#define flush_icache_user_range(vma, pg, adr, len) \
+       flush_icache_range(adr, adr + len)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+       do {                                    \
+               memcpy(dst, src, len);          \
+               flush_icache_page(vma, page);   \
+       } while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+       memcpy(dst, src, len)
+
+/*
+ * primitive routines
+ */
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+extern void mn10300_icache_inv(void);
+extern void mn10300_dcache_inv(void);
+extern void mn10300_dcache_inv_page(unsigned start);
+extern void mn10300_dcache_inv_range(unsigned start, unsigned end);
+extern void mn10300_dcache_inv_range2(unsigned start, unsigned size);
+#ifdef CONFIG_MN10300_CACHE_WBACK
+extern void mn10300_dcache_flush(void);
+extern void mn10300_dcache_flush_page(unsigned start);
+extern void mn10300_dcache_flush_range(unsigned start, unsigned end);
+extern void mn10300_dcache_flush_range2(unsigned start, unsigned size);
+extern void mn10300_dcache_flush_inv(void);
+extern void mn10300_dcache_flush_inv_page(unsigned start);
+extern void mn10300_dcache_flush_inv_range(unsigned start, unsigned end);
+extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size);
+#else
+#define mn10300_dcache_flush()                         do {} while (0)
+#define mn10300_dcache_flush_page(start)               do {} while (0)
+#define mn10300_dcache_flush_range(start, end)         do {} while (0)
+#define mn10300_dcache_flush_range2(start, size)       do {} while (0)
+#define mn10300_dcache_flush_inv()                     mn10300_dcache_inv()
+#define mn10300_dcache_flush_inv_page(start) \
+       mn10300_dcache_inv_page((start))
+#define mn10300_dcache_flush_inv_range(start, end) \
+       mn10300_dcache_inv_range((start), (end))
+#define mn10300_dcache_flush_inv_range2(start, size) \
+       mn10300_dcache_inv_range2((start), (size))
+#endif /* CONFIG_MN10300_CACHE_WBACK */
+#else
+#define mn10300_icache_inv()                           do {} while (0)
+#define mn10300_dcache_inv()                           do {} while (0)
+#define mn10300_dcache_inv_page(start)                 do {} while (0)
+#define mn10300_dcache_inv_range(start, end)           do {} while (0)
+#define mn10300_dcache_inv_range2(start, size)         do {} while (0)
+#define mn10300_dcache_flush()                         do {} while (0)
+#define mn10300_dcache_flush_inv_page(start)           do {} while (0)
+#define mn10300_dcache_flush_inv()                     do {} while (0)
+#define mn10300_dcache_flush_inv_range(start, end)     do {} while (0)
+#define mn10300_dcache_flush_inv_range2(start, size)   do {} while (0)
+#define mn10300_dcache_flush_page(start)               do {} while (0)
+#define mn10300_dcache_flush_range(start, end)         do {} while (0)
+#define mn10300_dcache_flush_range2(start, size)       do {} while (0)
+#endif /* CONFIG_MN10300_CACHE_DISABLED */
+
+/*
+ * internal debugging function
+ */
+#ifdef CONFIG_DEBUG_PAGEALLOC
+extern void kernel_map_pages(struct page *page, int numpages, int enable);
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_CACHEFLUSH_H */
diff --git a/include/asm-mn10300/checksum.h b/include/asm-mn10300/checksum.h
new file mode 100644 (file)
index 0000000..9fb2a8d
--- /dev/null
@@ -0,0 +1,86 @@
+/* MN10300 Optimised checksumming code
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CHECKSUM_H
+#define _ASM_CHECKSUM_H
+
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
+                                       int len, __wsum sum);
+extern __wsum csum_partial_copy_from_user(const void *src, void *dst,
+                                         int len, __wsum sum,
+                                         int *err_ptr);
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#define csum_partial_copy_fromuser csum_partial_copy
+extern __wsum csum_partial_copy(const void *src, void *dst, int len,
+                               __wsum sum);
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+       asm(
+               "       add     %1,%0           \n"
+               "       addc    0xffff,%0       \n"
+               : "=r" (sum)
+               : "r" (sum << 16), "0" (sum & 0xffff0000)
+               : "cc"
+           );
+       return (~sum) >> 16;
+}
+
+static inline __wsum csum_tcpudp_nofold(unsigned long saddr,
+                                       unsigned long daddr,
+                                       unsigned short len,
+                                       unsigned short proto,
+                                       __wsum sum)
+{
+       __wsum tmp;
+
+       tmp = (__wsum) ntohs(len) << 16;
+       tmp += (__wsum) proto << 8;
+
+       asm(
+               "       add     %1,%0           \n"
+               "       addc    %2,%0           \n"
+               "       addc    %3,%0           \n"
+               "       addc    0,%0            \n"
+               : "=r" (sum)
+               : "r" (daddr), "r"(saddr), "r"(tmp), "0"(sum)
+               : "cc"
+           );
+       return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(unsigned long saddr,
+                                       unsigned long daddr,
+                                       unsigned short len,
+                                       unsigned short proto,
+                                       __wsum sum)
+{
+       return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+#undef _HAVE_ARCH_IPV6_CSUM
+
+/*
+ *     Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+extern __wsum csum_and_copy_to_user(const void *src, void *dst, int len,
+                                   __wsum sum, int *err_ptr);
+
+
+#endif /* _ASM_CHECKSUM_H */
diff --git a/include/asm-mn10300/cpu-regs.h b/include/asm-mn10300/cpu-regs.h
new file mode 100644 (file)
index 0000000..757e9b5
--- /dev/null
@@ -0,0 +1,290 @@
+/* MN10300 Core system registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CPU_REGS_H
+#define _ASM_CPU_REGS_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif
+
+#ifdef CONFIG_MN10300_CPU_AM33V2
+/* we tell the compiler to pretend to be AM33 so that it doesn't try and use
+ * the FP regs, but tell the assembler that we're actually allowed AM33v2
+ * instructions */
+#ifndef __ASSEMBLY__
+asm(" .am33_2\n");
+#else
+.am33_2
+#endif
+#endif
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#define __SYSREG(ADDR, TYPE) (*(volatile TYPE *)(ADDR))
+#define __SYSREGC(ADDR, TYPE) (*(const volatile TYPE *)(ADDR))
+#else
+#define __SYSREG(ADDR, TYPE) ADDR
+#define __SYSREGC(ADDR, TYPE) ADDR
+#endif
+
+/* CPU registers */
+#define EPSW_FLAG_Z            0x00000001      /* zero flag */
+#define EPSW_FLAG_N            0x00000002      /* negative flag */
+#define EPSW_FLAG_C            0x00000004      /* carry flag */
+#define EPSW_FLAG_V            0x00000008      /* overflow flag */
+#define EPSW_IM                        0x00000700      /* interrupt mode */
+#define EPSW_IM_0              0x00000000      /* interrupt mode 0 */
+#define EPSW_IM_1              0x00000100      /* interrupt mode 1 */
+#define EPSW_IM_2              0x00000200      /* interrupt mode 2 */
+#define EPSW_IM_3              0x00000300      /* interrupt mode 3 */
+#define EPSW_IM_4              0x00000400      /* interrupt mode 4 */
+#define EPSW_IM_5              0x00000500      /* interrupt mode 5 */
+#define EPSW_IM_6              0x00000600      /* interrupt mode 6 */
+#define EPSW_IM_7              0x00000700      /* interrupt mode 7 */
+#define EPSW_IE                        0x00000800      /* interrupt enable */
+#define EPSW_S                 0x00003000      /* software auxilliary bits */
+#define EPSW_T                 0x00008000      /* trace enable */
+#define EPSW_nSL               0x00010000      /* not supervisor level */
+#define EPSW_NMID              0x00020000      /* nonmaskable interrupt disable */
+#define EPSW_nAR               0x00040000      /* register bank control */
+#define EPSW_ML                        0x00080000      /* monitor level */
+#define EPSW_FE                        0x00100000      /* FPU enable */
+
+/* FPU registers */
+#define FPCR_EF_I              0x00000001      /* inexact result FPU exception flag */
+#define FPCR_EF_U              0x00000002      /* underflow FPU exception flag */
+#define FPCR_EF_O              0x00000004      /* overflow FPU exception flag */
+#define FPCR_EF_Z              0x00000008      /* zero divide FPU exception flag */
+#define FPCR_EF_V              0x00000010      /* invalid operand FPU exception flag */
+#define FPCR_EE_I              0x00000020      /* inexact result FPU exception enable */
+#define FPCR_EE_U              0x00000040      /* underflow FPU exception enable */
+#define FPCR_EE_O              0x00000080      /* overflow FPU exception enable */
+#define FPCR_EE_Z              0x00000100      /* zero divide FPU exception enable */
+#define FPCR_EE_V              0x00000200      /* invalid operand FPU exception enable */
+#define FPCR_EC_I              0x00000400      /* inexact result FPU exception cause */
+#define FPCR_EC_U              0x00000800      /* underflow FPU exception cause */
+#define FPCR_EC_O              0x00001000      /* overflow FPU exception cause */
+#define FPCR_EC_Z              0x00002000      /* zero divide FPU exception cause */
+#define FPCR_EC_V              0x00004000      /* invalid operand FPU exception cause */
+#define FPCR_RM                        0x00030000      /* rounding mode */
+#define FPCR_RM_NEAREST                0x00000000      /* - round to nearest value */
+#define FPCR_FCC_U             0x00040000      /* FPU unordered condition code */
+#define FPCR_FCC_E             0x00080000      /* FPU equal condition code */
+#define FPCR_FCC_G             0x00100000      /* FPU greater than condition code */
+#define FPCR_FCC_L             0x00200000      /* FPU less than condition code */
+#define FPCR_INIT              0x00000000      /* no exceptions, rounding to nearest */
+
+/* CPU control registers */
+#define CPUP                   __SYSREG(0xc0000020, u16)       /* CPU pipeline register */
+#define CPUP_DWBD              0x0020          /* write buffer disable flag */
+#define CPUP_IPFD              0x0040          /* instruction prefetch disable flag */
+#define CPUP_EXM               0x0080          /* exception operation mode */
+#define CPUP_EXM_AM33V1                0x0000          /* - AM33 v1 exception mode */
+#define CPUP_EXM_AM33V2                0x0080          /* - AM33 v2 exception mode */
+
+#define CPUM                   __SYSREG(0xc0000040, u16)       /* CPU mode register */
+#define CPUM_SLEEP             0x0004          /* set to enter sleep state */
+#define CPUM_HALT              0x0008          /* set to enter halt state */
+#define CPUM_STOP              0x0010          /* set to enter stop state */
+
+#define CPUREV                 __SYSREGC(0xc0000050, u32)      /* CPU revision register */
+#define CPUREV_TYPE            0x0000000f      /* CPU type */
+#define CPUREV_TYPE_S          0
+#define CPUREV_TYPE_AM33V1     0x00000000      /* - AM33 V1 core, AM33/1.00 arch */
+#define CPUREV_TYPE_AM33V2     0x00000001      /* - AM33 V2 core, AM33/2.00 arch */
+#define CPUREV_TYPE_AM34V1     0x00000002      /* - AM34 V1 core, AM33/2.00 arch */
+#define CPUREV_REVISION                0x000000f0      /* CPU revision */
+#define CPUREV_REVISION_S      4
+#define CPUREV_ICWAY           0x00000f00      /* number of instruction cache ways */
+#define CPUREV_ICWAY_S         8
+#define CPUREV_ICSIZE          0x0000f000      /* instruction cache way size */
+#define CPUREV_ICSIZE_S                12
+#define CPUREV_DCWAY           0x000f0000      /* number of data cache ways */
+#define CPUREV_DCWAY_S         16
+#define CPUREV_DCSIZE          0x00f00000      /* data cache way size */
+#define CPUREV_DCSIZE_S                20
+#define CPUREV_FPUTYPE         0x0f000000      /* FPU core type */
+#define CPUREV_FPUTYPE_NONE    0x00000000      /* - no FPU core implemented */
+#define CPUREV_OCDCTG          0xf0000000      /* on-chip debug function category */
+
+#define DCR                    __SYSREG(0xc0000030, u16)       /* Debug control register */
+
+/* interrupt/exception control registers */
+#define IVAR0                  __SYSREG(0xc0000000, u16)       /* interrupt vector 0 */
+#define IVAR1                  __SYSREG(0xc0000004, u16)       /* interrupt vector 1 */
+#define IVAR2                  __SYSREG(0xc0000008, u16)       /* interrupt vector 2 */
+#define IVAR3                  __SYSREG(0xc000000c, u16)       /* interrupt vector 3 */
+#define IVAR4                  __SYSREG(0xc0000010, u16)       /* interrupt vector 4 */
+#define IVAR5                  __SYSREG(0xc0000014, u16)       /* interrupt vector 5 */
+#define IVAR6                  __SYSREG(0xc0000018, u16)       /* interrupt vector 6 */
+
+#define TBR                    __SYSREG(0xc0000024, u32)       /* Trap table base */
+#define TBR_TB                 0xff000000      /* table base address bits 31-24 */
+#define TBR_INT_CODE           0x00ffffff      /* interrupt code */
+
+#define DEAR                   __SYSREG(0xc0000038, u32)       /* Data access exception address */
+
+#define sISR                   __SYSREG(0xc0000044, u32)       /* Supervisor interrupt status */
+#define        sISR_IRQICE             0x00000001      /* ICE interrupt */
+#define        sISR_ISTEP              0x00000002      /* single step interrupt */
+#define        sISR_MISSA              0x00000004      /* memory access address misalignment fault */
+#define        sISR_UNIMP              0x00000008      /* unimplemented instruction execution fault */
+#define        sISR_PIEXE              0x00000010      /* program interrupt */
+#define        sISR_MEMERR             0x00000020      /* illegal memory access fault */
+#define        sISR_IBREAK             0x00000040      /* instraction break interrupt */
+#define        sISR_DBSRL              0x00000080      /* debug serial interrupt */
+#define        sISR_PERIDB             0x00000100      /* peripheral debug interrupt */
+#define        sISR_EXUNIMP            0x00000200      /* unimplemented ex-instruction execution fault */
+#define        sISR_OBREAK             0x00000400      /* operand break interrupt */
+#define        sISR_PRIV               0x00000800      /* privileged instruction execution fault */
+#define        sISR_BUSERR             0x00001000      /* bus error fault */
+#define        sISR_DBLFT              0x00002000      /* double fault */
+#define        sISR_DBG                0x00008000      /* debug reserved interrupt */
+#define sISR_ITMISS            0x00010000      /* instruction TLB miss */
+#define sISR_DTMISS            0x00020000      /* data TLB miss */
+#define sISR_ITEX              0x00040000      /* instruction TLB access exception */
+#define sISR_DTEX              0x00080000      /* data TLB access exception */
+#define sISR_ILGIA             0x00100000      /* illegal instruction access exception */
+#define sISR_ILGDA             0x00200000      /* illegal data access exception */
+#define sISR_IOIA              0x00400000      /* internal I/O space instruction access excep */
+#define sISR_PRIVA             0x00800000      /* privileged space instruction access excep */
+#define sISR_PRIDA             0x01000000      /* privileged space data access excep */
+#define sISR_DISA              0x02000000      /* data space instruction access excep */
+#define sISR_SYSC              0x04000000      /* system call instruction excep */
+#define sISR_FPUD              0x08000000      /* FPU disabled excep */
+#define sISR_FPUUI             0x10000000      /* FPU unimplemented instruction excep */
+#define sISR_FPUOP             0x20000000      /* FPU operation excep */
+#define sISR_NE                        0x80000000      /* multiple synchronous exceptions excep */
+
+/* cache control registers */
+#define CHCTR                  __SYSREG(0xc0000070, u16)       /* cache control */
+#define CHCTR_ICEN             0x0001          /* instruction cache enable */
+#define CHCTR_DCEN             0x0002          /* data cache enable */
+#define CHCTR_ICBUSY           0x0004          /* instruction cache busy */
+#define CHCTR_DCBUSY           0x0008          /* data cache busy */
+#define CHCTR_ICINV            0x0010          /* instruction cache invalidate */
+#define CHCTR_DCINV            0x0020          /* data cache invalidate */
+#define CHCTR_DCWTMD           0x0040          /* data cache writing mode */
+#define CHCTR_DCWTMD_WRBACK    0x0000          /* - write back mode */
+#define CHCTR_DCWTMD_WRTHROUGH 0x0040          /* - write through mode */
+#define CHCTR_DCALMD           0x0080          /* data cache allocation mode */
+#define CHCTR_ICWMD            0x0f00          /* instruction cache way mode */
+#define CHCTR_DCWMD            0xf000          /* data cache way mode */
+
+/* MMU control registers */
+#define MMUCTR                 __SYSREG(0xc0000090, u32)       /* MMU control register */
+#define MMUCTR_IRP             0x0000003f      /* instruction TLB replace pointer */
+#define MMUCTR_ITE             0x00000040      /* instruction TLB enable */
+#define MMUCTR_IIV             0x00000080      /* instruction TLB invalidate */
+#define MMUCTR_ITL             0x00000700      /* instruction TLB lock pointer */
+#define MMUCTR_ITL_NOLOCK      0x00000000      /* - no lock */
+#define MMUCTR_ITL_LOCK0       0x00000100      /* - entry 0 locked */
+#define MMUCTR_ITL_LOCK0_1     0x00000200      /* - entry 0-1 locked */
+#define MMUCTR_ITL_LOCK0_3     0x00000300      /* - entry 0-3 locked */
+#define MMUCTR_ITL_LOCK0_7     0x00000400      /* - entry 0-7 locked */
+#define MMUCTR_ITL_LOCK0_15    0x00000500      /* - entry 0-15 locked */
+#define MMUCTR_CE              0x00008000      /* cacheable bit enable */
+#define MMUCTR_DRP             0x003f0000      /* data TLB replace pointer */
+#define MMUCTR_DTE             0x00400000      /* data TLB enable */
+#define MMUCTR_DIV             0x00800000      /* data TLB invalidate */
+#define MMUCTR_DTL             0x07000000      /* data TLB lock pointer */
+#define MMUCTR_DTL_NOLOCK      0x00000000      /* - no lock */
+#define MMUCTR_DTL_LOCK0       0x01000000      /* - entry 0 locked */
+#define MMUCTR_DTL_LOCK0_1     0x02000000      /* - entry 0-1 locked */
+#define MMUCTR_DTL_LOCK0_3     0x03000000      /* - entry 0-3 locked */
+#define MMUCTR_DTL_LOCK0_7     0x04000000      /* - entry 0-7 locked */
+#define MMUCTR_DTL_LOCK0_15    0x05000000      /* - entry 0-15 locked */
+
+#define PIDR                   __SYSREG(0xc0000094, u16)       /* PID register */
+#define PIDR_PID               0x00ff          /* process identifier */
+
+#define PTBR                   __SYSREG(0xc0000098, unsigned long) /* Page table base register */
+
+#define IPTEL                  __SYSREG(0xc00000a0, u32)       /* instruction TLB entry */
+#define DPTEL                  __SYSREG(0xc00000b0, u32)       /* data TLB entry */
+#define xPTEL_V                        0x00000001      /* TLB entry valid */
+#define xPTEL_UNUSED1          0x00000002      /* unused bit */
+#define xPTEL_UNUSED2          0x00000004      /* unused bit */
+#define xPTEL_C                        0x00000008      /* cached if set */
+#define xPTEL_PV               0x00000010      /* page valid */
+#define xPTEL_D                        0x00000020      /* dirty */
+#define xPTEL_PR               0x000001c0      /* page protection */
+#define xPTEL_PR_ROK           0x00000000      /* - R/O kernel */
+#define xPTEL_PR_RWK           0x00000100      /* - R/W kernel */
+#define xPTEL_PR_ROK_ROU       0x00000080      /* - R/O kernel and R/O user */
+#define xPTEL_PR_RWK_ROU       0x00000180      /* - R/W kernel and R/O user */
+#define xPTEL_PR_RWK_RWU       0x000001c0      /* - R/W kernel and R/W user */
+#define xPTEL_G                        0x00000200      /* global (use PID if 0) */
+#define xPTEL_PS               0x00000c00      /* page size */
+#define xPTEL_PS_4Kb           0x00000000      /* - 4Kb page */
+#define xPTEL_PS_128Kb         0x00000400      /* - 128Kb page */
+#define xPTEL_PS_1Kb           0x00000800      /* - 1Kb page */
+#define xPTEL_PS_4Mb           0x00000c00      /* - 4Mb page */
+#define xPTEL_PPN              0xfffff006      /* physical page number */
+
+#define xPTEL_V_BIT            0       /* bit numbers corresponding to above masks */
+#define xPTEL_UNUSED1_BIT      1
+#define xPTEL_UNUSED2_BIT      2
+#define xPTEL_C_BIT            3
+#define xPTEL_PV_BIT           4
+#define xPTEL_D_BIT            5
+#define xPTEL_G_BIT            9
+
+#define IPTEU                  __SYSREG(0xc00000a4, u32)       /* instruction TLB virtual addr */
+#define DPTEU                  __SYSREG(0xc00000b4, u32)       /* data TLB virtual addr */
+#define xPTEU_VPN              0xfffffc00      /* virtual page number */
+#define xPTEU_PID              0x000000ff      /* process identifier to which applicable */
+
+#define IPTEL2                 __SYSREG(0xc00000a8, u32)       /* instruction TLB entry */
+#define DPTEL2                 __SYSREG(0xc00000b8, u32)       /* data TLB entry */
+#define xPTEL2_V               0x00000001      /* TLB entry valid */
+#define xPTEL2_C               0x00000002      /* cacheable */
+#define xPTEL2_PV              0x00000004      /* page valid */
+#define xPTEL2_D               0x00000008      /* dirty */
+#define xPTEL2_PR              0x00000070      /* page protection */
+#define xPTEL2_PR_ROK          0x00000000      /* - R/O kernel */
+#define xPTEL2_PR_RWK          0x00000040      /* - R/W kernel */
+#define xPTEL2_PR_ROK_ROU      0x00000020      /* - R/O kernel and R/O user */
+#define xPTEL2_PR_RWK_ROU      0x00000060      /* - R/W kernel and R/O user */
+#define xPTEL2_PR_RWK_RWU      0x00000070      /* - R/W kernel and R/W user */
+#define xPTEL2_G               0x00000080      /* global (use PID if 0) */
+#define xPTEL2_PS              0x00000300      /* page size */
+#define xPTEL2_PS_4Kb          0x00000000      /* - 4Kb page */
+#define xPTEL2_PS_128Kb                0x00000100      /* - 128Kb page */
+#define xPTEL2_PS_1Kb          0x00000200      /* - 1Kb page */
+#define xPTEL2_PS_4Mb          0x00000300      /* - 4Mb page */
+#define xPTEL2_PPN             0xfffffc00      /* physical page number */
+
+#define MMUFCR                 __SYSREGC(0xc000009c, u32)      /* MMU exception cause */
+#define MMUFCR_IFC             __SYSREGC(0xc000009c, u16)      /* MMU instruction excep cause */
+#define MMUFCR_DFC             __SYSREGC(0xc000009e, u16)      /* MMU data exception cause */
+#define MMUFCR_xFC_TLBMISS     0x0001          /* TLB miss flag */
+#define MMUFCR_xFC_INITWR      0x0002          /* initial write excep flag */
+#define MMUFCR_xFC_PGINVAL     0x0004          /* page invalid excep flag */
+#define MMUFCR_xFC_PROTVIOL    0x0008          /* protection violation excep flag */
+#define MMUFCR_xFC_ACCESS      0x0010          /* access level flag */
+#define MMUFCR_xFC_ACCESS_USR  0x0000          /* - user mode */
+#define MMUFCR_xFC_ACCESS_SR   0x0010          /* - supervisor mode */
+#define MMUFCR_xFC_TYPE                0x0020          /* access type flag */
+#define MMUFCR_xFC_TYPE_READ   0x0000          /* - read */
+#define MMUFCR_xFC_TYPE_WRITE  0x0020          /* - write */
+#define MMUFCR_xFC_PR          0x01c0          /* page protection flag */
+#define MMUFCR_xFC_PR_ROK      0x0000          /* - R/O kernel */
+#define MMUFCR_xFC_PR_RWK      0x0100          /* - R/W kernel */
+#define MMUFCR_xFC_PR_ROK_ROU  0x0080          /* - R/O kernel and R/O user */
+#define MMUFCR_xFC_PR_RWK_ROU  0x0180          /* - R/W kernel and R/O user */
+#define MMUFCR_xFC_PR_RWK_RWU  0x01c0          /* - R/W kernel and R/W user */
+#define MMUFCR_xFC_ILLADDR     0x0200          /* illegal address excep flag */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_CPU_REGS_H */
diff --git a/include/asm-mn10300/cputime.h b/include/asm-mn10300/cputime.h
new file mode 100644 (file)
index 0000000..6d68ad7
--- /dev/null
@@ -0,0 +1 @@
+#include <asm-generic/cputime.h>
diff --git a/include/asm-mn10300/current.h b/include/asm-mn10300/current.h
new file mode 100644 (file)
index 0000000..ca6027d
--- /dev/null
@@ -0,0 +1,37 @@
+/* MN10300 Current task structure accessor
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CURRENT_H
+#define _ASM_CURRENT_H
+
+#include <linux/thread_info.h>
+
+/*
+ * dedicate E2 to keeping the current task pointer
+ */
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+
+register struct task_struct *const current asm("e2") __attribute__((used));
+
+#define get_current() current
+
+extern struct task_struct *__current;
+
+#else
+static inline __attribute__((const))
+struct task_struct *get_current(void)
+{
+       return current_thread_info()->task;
+}
+
+#define current get_current()
+#endif
+
+#endif /* _ASM_CURRENT_H */
diff --git a/include/asm-mn10300/delay.h b/include/asm-mn10300/delay.h
new file mode 100644 (file)
index 0000000..34517b3
--- /dev/null
@@ -0,0 +1,19 @@
+/* MN10300 Uninterruptible delay routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DELAY_H
+#define _ASM_DELAY_H
+
+extern void __udelay(unsigned long usecs);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) __udelay(n)
+
+#endif /* _ASM_DELAY_H */
diff --git a/include/asm-mn10300/device.h b/include/asm-mn10300/device.h
new file mode 100644 (file)
index 0000000..f0a4c25
--- /dev/null
@@ -0,0 +1 @@
+#include <asm-generic/device.h>
diff --git a/include/asm-mn10300/div64.h b/include/asm-mn10300/div64.h
new file mode 100644 (file)
index 0000000..bf9c515
--- /dev/null
@@ -0,0 +1,103 @@
+/* MN10300 64-bit division
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DIV64
+#define _ASM_DIV64
+
+#include <linux/types.h>
+
+extern void ____unhandled_size_in_do_div___(void);
+
+/*
+ * divide n by base, leaving the result in n and returning the remainder
+ * - we can do this quite efficiently on the MN10300 by cascading the divides
+ *   through the MDR register
+ */
+#define do_div(n, base)                                                        \
+({                                                                     \
+       unsigned __rem = 0;                                             \
+       if (sizeof(n) <= 4) {                                           \
+               asm("mov        %1,mdr  \n"                             \
+                   "divu       %2,%0   \n"                             \
+                   "mov        mdr,%1  \n"                             \
+                   : "+r"(n), "=d"(__rem)                              \
+                   : "r"(base), "1"(__rem)                             \
+                   : "cc"                                              \
+                   );                                                  \
+       } else if (sizeof(n) <= 8) {                                    \
+               union {                                                 \
+                       unsigned long long l;                           \
+                       u32 w[2];                                       \
+               } __quot;                                               \
+               __quot.l = n;                                           \
+               asm("mov        %0,mdr  \n"     /* MDR = 0 */           \
+                   "divu       %3,%1   \n"                             \
+                   /* __quot.MSL = __div.MSL / base, */                \
+                   /* MDR = MDR:__div.MSL % base */                    \
+                   "divu       %3,%2   \n"                             \
+                   /* __quot.LSL = MDR:__div.LSL / base, */            \
+                   /* MDR = MDR:__div.LSL % base */                    \
+                   "mov        mdr,%0  \n"                             \
+                   : "=d"(__rem), "=r"(__quot.w[1]), "=r"(__quot.w[0]) \
+                   : "r"(base), "0"(__rem), "1"(__quot.w[1]),          \
+                     "2"(__quot.w[0])                                  \
+                   : "cc"                                              \
+                   );                                                  \
+               n = __quot.l;                                           \
+       } else {                                                        \
+               ____unhandled_size_in_do_div___();                      \
+       }                                                               \
+       __rem;                                                          \
+})
+
+/*
+ * do an unsigned 32-bit multiply and divide with intermediate 64-bit product
+ * so as not to lose accuracy
+ * - we use the MDR register to hold the MSW of the product
+ */
+static inline __attribute__((const))
+unsigned __muldiv64u(unsigned val, unsigned mult, unsigned div)
+{
+       unsigned result;
+
+       asm("mulu       %2,%0   \n"     /* MDR:val = val*mult */
+           "divu       %3,%0   \n"     /* val = MDR:val/div;
+                                        * MDR = MDR:val%div */
+           : "=r"(result)
+           : "0"(val), "ir"(mult), "r"(div)
+           );
+
+       return result;
+}
+
+/*
+ * do a signed 32-bit multiply and divide with intermediate 64-bit product so
+ * as not to lose accuracy
+ * - we use the MDR register to hold the MSW of the product
+ */
+static inline __attribute__((const))
+signed __muldiv64s(signed val, signed mult, signed div)
+{
+       signed result;
+
+       asm("mul        %2,%0   \n"     /* MDR:val = val*mult */
+           "div        %3,%0   \n"     /* val = MDR:val/div;
+                                        * MDR = MDR:val%div */
+           : "=r"(result)
+           : "0"(val), "ir"(mult), "r"(div)
+           );
+
+       return result;
+}
+
+extern __attribute__((const))
+uint64_t div64_64(uint64_t dividend, uint64_t divisor);
+
+#endif /* _ASM_DIV64 */
diff --git a/include/asm-mn10300/dma-mapping.h b/include/asm-mn10300/dma-mapping.h
new file mode 100644 (file)
index 0000000..7c882fc
--- /dev/null
@@ -0,0 +1,234 @@
+/* DMA mapping routines for the MN10300 arch
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+
+#include <asm/cache.h>
+#include <asm/io.h>
+
+extern void *dma_alloc_coherent(struct device *dev, size_t size,
+                               dma_addr_t *dma_handle, int flag);
+
+extern void dma_free_coherent(struct device *dev, size_t size,
+                             void *vaddr, dma_addr_t dma_handle);
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f))
+#define dma_free_noncoherent(d, s, v, h)  dma_free_coherent((d), (s), (v), (h))
+
+/*
+ * Map a single buffer of the indicated size for DMA in streaming mode.  The
+ * 32-bit bus address to use is returned.
+ *
+ * Once the device is given the dma address, the device owns this memory until
+ * either pci_unmap_single or pci_dma_sync_single is performed.
+ */
+static inline
+dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+                         enum dma_data_direction direction)
+{
+       BUG_ON(direction == DMA_NONE);
+       mn10300_dcache_flush_inv();
+       return virt_to_bus(ptr);
+}
+
+/*
+ * Unmap a single streaming mode DMA translation.  The dma_addr and size must
+ * match what was provided for in a previous pci_map_single call.  All other
+ * usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guarenteed to see
+ * whatever the device wrote there.
+ */
+static inline
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+                     enum dma_data_direction direction)
+{
+       BUG_ON(direction == DMA_NONE);
+}
+
+/*
+ * Map a set of buffers described by scatterlist in streaming mode for DMA.
+ * This is the scather-gather version of the above pci_map_single interface.
+ * Here the scatter gather list elements are each tagged with the appropriate
+ * dma address and length.  They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of DMA
+ *       address/length pairs than there are SG table elements.  (for example
+ *       via virtual mapping capabilities) The routine returns the number of
+ *       addr/length pairs actually used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are the same
+ * here.
+ */
+static inline
+int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
+              enum dma_data_direction direction)
+{
+       struct scatterlist *sg;
+       int i;
+
+       BUG_ON(!valid_dma_direction(direction));
+       WARN_ON(nents == 0 || sglist[0].length == 0);
+
+       for_each_sg(sglist, sg, nents, i) {
+               BUG_ON(!sg_page(sg));
+
+               sg->dma_address = sg_phys(sg);
+       }
+
+       mn10300_dcache_flush_inv();
+       return nents;
+}
+
+/*
+ * Unmap a set of streaming mode DMA translations.
+ * Again, cpu read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+static inline
+void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+                 enum dma_data_direction direction)
+{
+       BUG_ON(!valid_dma_direction(direction));
+}
+
+/*
+ * pci_{map,unmap}_single_page maps a kernel page to a dma_addr_t. identical
+ * to pci_map_single, but takes a struct page instead of a virtual address
+ */
+static inline
+dma_addr_t dma_map_page(struct device *dev, struct page *page,
+                       unsigned long offset, size_t size,
+                       enum dma_data_direction direction)
+{
+       BUG_ON(direction == DMA_NONE);
+       return page_to_bus(page) + offset;
+}
+
+static inline
+void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+                   enum dma_data_direction direction)
+{
+       BUG_ON(direction == DMA_NONE);
+}
+
+/*
+ * Make physical memory consistent for a single streaming mode DMA translation
+ * after a transfer.
+ *
+ * If you perform a pci_map_single() but wish to interrogate the buffer using
+ * the cpu, yet do not wish to teardown the PCI dma mapping, you must call this
+ * function before doing so.  At the next point you give the PCI dma address
+ * back to the card, the device again owns the buffer.
+ */
+static inline
+void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+                            size_t size, enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+                               size_t size, enum dma_data_direction direction)
+{
+       mn10300_dcache_flush_inv();
+}
+
+static inline
+void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+                                  unsigned long offset, size_t size,
+                                  enum dma_data_direction direction)
+{
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+                                unsigned long offset, size_t size,
+                                enum dma_data_direction direction)
+{
+       mn10300_dcache_flush_inv();
+}
+
+
+/*
+ * Make physical memory consistent for a set of streaming mode DMA translations
+ * after a transfer.
+ *
+ * The same as pci_dma_sync_single but for a scatter-gather list, same rules
+ * and usage.
+ */
+static inline
+void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+                        int nelems, enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+                           int nelems, enum dma_data_direction direction)
+{
+       mn10300_dcache_flush_inv();
+}
+
+static inline
+int dma_mapping_error(dma_addr_t dma_addr)
+{
+       return 0;
+}
+
+/*
+ * Return whether the given PCI device DMA address mask can be supported
+ * properly.  For example, if your device can only drive the low 24-bits during
+ * PCI bus mastering, then you would pass 0x00ffffff as the mask to this
+ * function.
+ */
+static inline
+int dma_supported(struct device *dev, u64 mask)
+{
+       /*
+        * we fall back to GFP_DMA when the mask isn't all 1s, so we can't
+        * guarantee allocations that must be within a tighter range than
+        * GFP_DMA
+        */
+       if (mask < 0x00ffffff)
+               return 0;
+       return 1;
+}
+
+static inline
+int dma_set_mask(struct device *dev, u64 mask)
+{
+       if (!dev->dma_mask || !dma_supported(dev, mask))
+               return -EIO;
+
+       *dev->dma_mask = mask;
+       return 0;
+}
+
+static inline
+int dma_get_cache_alignment(void)
+{
+       return 1 << L1_CACHE_SHIFT;
+}
+
+#define dma_is_consistent(d)   (1)
+
+static inline
+void dma_cache_sync(void *vaddr, size_t size,
+                   enum dma_data_direction direction)
+{
+       mn10300_dcache_flush_inv();
+}
+
+#endif
diff --git a/include/asm-mn10300/dma.h b/include/asm-mn10300/dma.h
new file mode 100644 (file)
index 0000000..098df2e
--- /dev/null
@@ -0,0 +1,118 @@
+/* MN10300 ISA DMA handlers and definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <asm/system.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+
+#undef MAX_DMA_CHANNELS                /* switch off linux/kernel/dma.c */
+#define MAX_DMA_ADDRESS                0xbfffffff
+
+extern spinlock_t dma_spin_lock;
+
+static inline unsigned long claim_dma_lock(void)
+{
+       unsigned long flags;
+       spin_lock_irqsave(&dma_spin_lock, flags);
+       return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+       spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static inline void enable_dma(unsigned int dmanr)
+{
+}
+
+static inline void disable_dma(unsigned int dmanr)
+{
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static inline void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static inline void set_dma_mode(unsigned int dmanr, char mode)
+{
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static inline void set_dma_page(unsigned int dmanr, char pagenr)
+{
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static inline void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static inline int get_dma_residue(unsigned int dmanr)
+{
+       return 0;
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char *device_id);
+extern void free_dma(unsigned int dmanr);
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy   (0)
+#endif
+
+#endif /* _ASM_DMA_H */
diff --git a/include/asm-mn10300/dmactl-regs.h b/include/asm-mn10300/dmactl-regs.h
new file mode 100644 (file)
index 0000000..58a199d
--- /dev/null
@@ -0,0 +1,101 @@
+/* MN10300 on-board DMA controller registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMACTL_REGS_H
+#define _ASM_DMACTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* DMA registers */
+#define        DMxCTR(N)               __SYSREG(0xd2000000 + ((N) * 0x100), u32)       /* control reg */
+#define        DMxCTR_BG               0x0000001f      /* transfer request source */
+#define        DMxCTR_BG_SOFT          0x00000000      /* - software source */
+#define        DMxCTR_BG_SC0TX         0x00000002      /* - serial port 0 transmission */
+#define        DMxCTR_BG_SC0RX         0x00000003      /* - serial port 0 reception */
+#define        DMxCTR_BG_SC1TX         0x00000004      /* - serial port 1 transmission */
+#define        DMxCTR_BG_SC1RX         0x00000005      /* - serial port 1 reception */
+#define        DMxCTR_BG_SC2TX         0x00000006      /* - serial port 2 transmission */
+#define        DMxCTR_BG_SC2RX         0x00000007      /* - serial port 2 reception */
+#define        DMxCTR_BG_TM0UFLOW      0x00000008      /* - timer 0 underflow */
+#define        DMxCTR_BG_TM1UFLOW      0x00000009      /* - timer 1 underflow */
+#define        DMxCTR_BG_TM2UFLOW      0x0000000a      /* - timer 2 underflow */
+#define        DMxCTR_BG_TM3UFLOW      0x0000000b      /* - timer 3 underflow */
+#define        DMxCTR_BG_TM6ACMPCAP    0x0000000c      /* - timer 6A compare/capture */
+#define        DMxCTR_BG_AFE           0x0000000d      /* - analogue front-end interrupt source */
+#define        DMxCTR_BG_ADC           0x0000000e      /* - A/D conversion end interrupt source */
+#define        DMxCTR_BG_IRDA          0x0000000f      /* - IrDA interrupt source */
+#define        DMxCTR_BG_RTC           0x00000010      /* - RTC interrupt source */
+#define        DMxCTR_BG_XIRQ0         0x00000011      /* - XIRQ0 pin interrupt source */
+#define        DMxCTR_BG_XIRQ1         0x00000012      /* - XIRQ1 pin interrupt source */
+#define        DMxCTR_BG_XDMR0         0x00000013      /* - external request 0 source (XDMR0 pin) */
+#define        DMxCTR_BG_XDMR1         0x00000014      /* - external request 1 source (XDMR1 pin) */
+#define        DMxCTR_SAM              0x000000e0      /* DMA transfer src addr mode */
+#define        DMxCTR_SAM_INCR         0x00000000      /* - increment */
+#define        DMxCTR_SAM_DECR         0x00000020      /* - decrement */
+#define        DMxCTR_SAM_FIXED        0x00000040      /* - fixed */
+#define        DMxCTR_DAM              0x00000000      /* DMA transfer dest addr mode */
+#define        DMxCTR_DAM_INCR         0x00000000      /* - increment */
+#define        DMxCTR_DAM_DECR         0x00000100      /* - decrement */
+#define        DMxCTR_DAM_FIXED        0x00000200      /* - fixed */
+#define        DMxCTR_TM               0x00001800      /* DMA transfer mode */
+#define        DMxCTR_TM_BATCH         0x00000000      /* - batch transfer */
+#define        DMxCTR_TM_INTERM        0x00001000      /* - intermittent transfer */
+#define        DMxCTR_UT               0x00006000      /* DMA transfer unit */
+#define        DMxCTR_UT_1             0x00000000      /* - 1 byte */
+#define        DMxCTR_UT_2             0x00002000      /* - 2 byte */
+#define        DMxCTR_UT_4             0x00004000      /* - 4 byte */
+#define        DMxCTR_UT_16            0x00006000      /* - 16 byte */
+#define        DMxCTR_TEN              0x00010000      /* DMA channel transfer enable */
+#define        DMxCTR_RQM              0x00060000      /* external request input source mode */
+#define        DMxCTR_RQM_FALLEDGE     0x00000000      /* - falling edge */
+#define        DMxCTR_RQM_RISEEDGE     0x00020000      /* - rising edge */
+#define        DMxCTR_RQM_LOLEVEL      0x00040000      /* - low level */
+#define        DMxCTR_RQM_HILEVEL      0x00060000      /* - high level */
+#define        DMxCTR_RQF              0x01000000      /* DMA transfer request flag */
+#define        DMxCTR_XEND             0x80000000      /* DMA transfer end flag */
+
+#define        DMxSRC(N)               __SYSREG(0xd2000004 + ((N) * 0x100), u32)       /* control reg */
+
+#define        DMxDST(N)               __SYSREG(0xd2000008 + ((N) * 0x100), u32)       /* src addr reg */
+
+#define        DMxSIZ(N)               __SYSREG(0xd200000c + ((N) * 0x100), u32)       /* dest addr reg */
+#define DMxSIZ_CT              0x000fffff      /* number of bytes to transfer */
+
+#define        DMxCYC(N)               __SYSREG(0xd2000010 + ((N) * 0x100), u32)       /* intermittent
+                                                                                * size reg */
+#define DMxCYC_CYC             0x000000ff      /* number of interrmittent transfers -1 */
+
+#define DM0IRQ                 16              /* DMA channel 0 complete IRQ */
+#define DM1IRQ                 17              /* DMA channel 1 complete IRQ */
+#define DM2IRQ                 18              /* DMA channel 2 complete IRQ */
+#define DM3IRQ                 19              /* DMA channel 3 complete IRQ */
+
+#define        DM0ICR                  GxICR(DM0IRQ)   /* DMA channel 0 complete intr ctrl reg */
+#define        DM1ICR                  GxICR(DM0IR1)   /* DMA channel 1 complete intr ctrl reg */
+#define        DM2ICR                  GxICR(DM0IR2)   /* DMA channel 2 complete intr ctrl reg */
+#define        DM3ICR                  GxICR(DM0IR3)   /* DMA channel 3 complete intr ctrl reg */
+
+#ifndef __ASSEMBLY__
+
+struct mn10300_dmactl_regs {
+       u32             ctr;
+       const void      *src;
+       void            *dst;
+       u32             siz;
+       u32             cyc;
+} __attribute__((aligned(0x100)));
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_DMACTL_REGS_H */
diff --git a/include/asm-mn10300/elf.h b/include/asm-mn10300/elf.h
new file mode 100644 (file)
index 0000000..256a704
--- /dev/null
@@ -0,0 +1,147 @@
+/* MN10300 ELF constant and register definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_ELF_H
+#define _ASM_ELF_H
+
+#include <linux/utsname.h>
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/*
+ * AM33 relocations
+ */
+#define R_MN10300_NONE         0       /* No reloc.  */
+#define R_MN10300_32           1       /* Direct 32 bit.  */
+#define R_MN10300_16           2       /* Direct 16 bit.  */
+#define R_MN10300_8            3       /* Direct 8 bit.  */
+#define R_MN10300_PCREL32      4       /* PC-relative 32-bit.  */
+#define R_MN10300_PCREL16      5       /* PC-relative 16-bit signed.  */
+#define R_MN10300_PCREL8       6       /* PC-relative 8-bit signed.  */
+#define R_MN10300_24           9       /* Direct 24 bit.  */
+#define R_MN10300_RELATIVE     23      /* Adjust by program base.  */
+
+/*
+ * ELF register definitions..
+ */
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+#define ELF_NFPREG 32
+typedef float elf_fpreg_t;
+
+typedef struct {
+       elf_fpreg_t     fpregs[ELF_NFPREG];
+       u_int32_t       fpcr;
+} elf_fpregset_t;
+
+extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture
+ */
+#define elf_check_arch(x) \
+       (((x)->e_machine == EM_CYGNUS_MN10300) ||       \
+        ((x)->e_machine == EM_MN10300))
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS      ELFCLASS32
+#define ELF_DATA       ELFDATA2LSB
+#define ELF_ARCH       EM_MN10300
+
+/*
+ * ELF process initialiser
+ */
+#define ELF_PLAT_INIT(_r, load_addr)                                   \
+do {                                                                   \
+       struct pt_regs *_ur = current->thread.uregs;                    \
+       _ur->a3   = 0;  _ur->a2   = 0;  _ur->d3   = 0;  _ur->d2   = 0;  \
+       _ur->mcvf = 0;  _ur->mcrl = 0;  _ur->mcrh = 0;  _ur->mdrq = 0;  \
+       _ur->e1   = 0;  _ur->e0   = 0;  _ur->e7   = 0;  _ur->e6   = 0;  \
+       _ur->e5   = 0;  _ur->e4   = 0;  _ur->e3   = 0;  _ur->e2   = 0;  \
+       _ur->lar  = 0;  _ur->lir  = 0;  _ur->mdr  = 0;                  \
+       _ur->a1   = 0;  _ur->a0   = 0;  _ur->d1   = 0;  _ur->d0   = 0;  \
+} while (0)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE      4096
+
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+ * use of this is to invoke "./ld.so someprog" to test out a new version of
+ * the loader.  We need to make sure that it is out of the way of the program
+ * that it will "exec", and that there is sufficient room for the brk.
+ * - must clear the VMALLOC area
+ */
+#define ELF_ET_DYN_BASE         0x04000000
+
+/*
+ * regs is struct pt_regs, pr_reg is elf_gregset_t (which is
+ * now struct user_regs, they are different)
+ * - ELF_CORE_COPY_REGS has been guessed, and may be wrong
+ */
+#define ELF_CORE_COPY_REGS(pr_reg, regs)       \
+do {                                           \
+       pr_reg[0]       = regs->a3;             \
+       pr_reg[1]       = regs->a2;             \
+       pr_reg[2]       = regs->d3;             \
+       pr_reg[3]       = regs->d2;             \
+       pr_reg[4]       = regs->mcvf;           \
+       pr_reg[5]       = regs->mcrl;           \
+       pr_reg[6]       = regs->mcrh;           \
+       pr_reg[7]       = regs->mdrq;           \
+       pr_reg[8]       = regs->e1;             \
+       pr_reg[9]       = regs->e0;             \
+       pr_reg[10]      = regs->e7;             \
+       pr_reg[11]      = regs->e6;             \
+       pr_reg[12]      = regs->e5;             \
+       pr_reg[13]      = regs->e4;             \
+       pr_reg[14]      = regs->e3;             \
+       pr_reg[15]      = regs->e2;             \
+       pr_reg[16]      = regs->sp;             \
+       pr_reg[17]      = regs->lar;            \
+       pr_reg[18]      = regs->lir;            \
+       pr_reg[19]      = regs->mdr;            \
+       pr_reg[20]      = regs->a1;             \
+       pr_reg[21]      = regs->a0;             \
+       pr_reg[22]      = regs->d1;             \
+       pr_reg[23]      = regs->d0;             \
+       pr_reg[24]      = regs->orig_d0;        \
+       pr_reg[25]      = regs->epsw;           \
+       pr_reg[26]      = regs->pc;             \
+} while (0);
+
+/*
+ * This yields a mask that user programs can use to figure out what
+ * instruction set this CPU supports.  This could be done in user space,
+ * but it's not easy, and we've already done it here.
+ */
+#define ELF_HWCAP      (0)
+
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization.  This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ *
+ * For the moment, we have only optimizations for the Intel generations,
+ * but that could change...
+ */
+#define ELF_PLATFORM  (NULL)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX)
+#endif
+
+#endif /* _ASM_ELF_H */
diff --git a/include/asm-mn10300/emergency-restart.h b/include/asm-mn10300/emergency-restart.h
new file mode 100644 (file)
index 0000000..3711bd9
--- /dev/null
@@ -0,0 +1 @@
+#include <asm-generic/emergency-restart.h>
diff --git a/include/asm-mn10300/errno.h b/include/asm-mn10300/errno.h
new file mode 100644 (file)
index 0000000..4c82b50
--- /dev/null
@@ -0,0 +1 @@
+#include <asm-generic/errno.h>
diff --git a/include/asm-mn10300/exceptions.h b/include/asm-mn10300/exceptions.h
new file mode 100644 (file)
index 0000000..fa16466
--- /dev/null
@@ -0,0 +1,121 @@
+/* MN10300 Microcontroller core exceptions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_EXCEPTIONS_H
+#define _ASM_EXCEPTIONS_H
+
+#include <linux/linkage.h>
+
+/*
+ * define the breakpoint instruction opcode to use
+ * - note that the JTAG unit steals 0xFF, so we want to avoid that if we can
+ *   (can use 0xF7)
+ */
+#define GDBSTUB_BKPT           0xFF
+
+#ifndef __ASSEMBLY__
+
+/*
+ * enumeration of exception codes (as extracted from TBR MSW)
+ */
+enum exception_code {
+       EXCEP_RESET             = 0x000000,     /* reset */
+
+       /* MMU exceptions */
+       EXCEP_ITLBMISS          = 0x000100,     /* instruction TLB miss */
+       EXCEP_DTLBMISS          = 0x000108,     /* data TLB miss */
+       EXCEP_IAERROR           = 0x000110,     /* instruction address */
+       EXCEP_DAERROR           = 0x000118,     /* data address */
+
+       /* system exceptions */
+       EXCEP_TRAP              = 0x000128,     /* program interrupt (PI instruction) */
+       EXCEP_ISTEP             = 0x000130,     /* single step */
+       EXCEP_IBREAK            = 0x000150,     /* instruction breakpoint */
+       EXCEP_OBREAK            = 0x000158,     /* operand breakpoint */
+       EXCEP_PRIVINS           = 0x000160,     /* privileged instruction execution */
+       EXCEP_UNIMPINS          = 0x000168,     /* unimplemented instruction execution */
+       EXCEP_UNIMPEXINS        = 0x000170,     /* unimplemented extended instruction execution */
+       EXCEP_MEMERR            = 0x000178,     /* illegal memory access */
+       EXCEP_MISALIGN          = 0x000180,     /* misalignment */
+       EXCEP_BUSERROR          = 0x000188,     /* bus error */
+       EXCEP_ILLINSACC         = 0x000190,     /* illegal instruction access */
+       EXCEP_ILLDATACC         = 0x000198,     /* illegal data access */
+       EXCEP_IOINSACC          = 0x0001a0,     /* I/O space instruction access */
+       EXCEP_PRIVINSACC        = 0x0001a8,     /* privileged space instruction access */
+       EXCEP_PRIVDATACC        = 0x0001b0,     /* privileged space data access */
+       EXCEP_DATINSACC         = 0x0001b8,     /* data space instruction access */
+       EXCEP_DOUBLE_FAULT      = 0x000200,     /* double fault */
+
+       /* FPU exceptions */
+       EXCEP_FPU_DISABLED      = 0x0001c0,     /* FPU disabled */
+       EXCEP_FPU_UNIMPINS      = 0x0001c8,     /* FPU unimplemented operation */
+       EXCEP_FPU_OPERATION     = 0x0001d0,     /* FPU operation */
+
+       /* interrupts */
+       EXCEP_WDT               = 0x000240,     /* watchdog timer overflow */
+       EXCEP_NMI               = 0x000248,     /* non-maskable interrupt */
+       EXCEP_IRQ_LEVEL0        = 0x000280,     /* level 0 maskable interrupt */
+       EXCEP_IRQ_LEVEL1        = 0x000288,     /* level 1 maskable interrupt */
+       EXCEP_IRQ_LEVEL2        = 0x000290,     /* level 2 maskable interrupt */
+       EXCEP_IRQ_LEVEL3        = 0x000298,     /* level 3 maskable interrupt */
+       EXCEP_IRQ_LEVEL4        = 0x0002a0,     /* level 4 maskable interrupt */
+       EXCEP_IRQ_LEVEL5        = 0x0002a8,     /* level 5 maskable interrupt */
+       EXCEP_IRQ_LEVEL6        = 0x0002b0,     /* level 6 maskable interrupt */
+
+       /* system calls */
+       EXCEP_SYSCALL0          = 0x000300,     /* system call 0 */
+       EXCEP_SYSCALL1          = 0x000308,     /* system call 1 */
+       EXCEP_SYSCALL2          = 0x000310,     /* system call 2 */
+       EXCEP_SYSCALL3          = 0x000318,     /* system call 3 */
+       EXCEP_SYSCALL4          = 0x000320,     /* system call 4 */
+       EXCEP_SYSCALL5          = 0x000328,     /* system call 5 */
+       EXCEP_SYSCALL6          = 0x000330,     /* system call 6 */
+       EXCEP_SYSCALL7          = 0x000338,     /* system call 7 */
+       EXCEP_SYSCALL8          = 0x000340,     /* system call 8 */
+       EXCEP_SYSCALL9          = 0x000348,     /* system call 9 */
+       EXCEP_SYSCALL10         = 0x000350,     /* system call 10 */
+       EXCEP_SYSCALL11         = 0x000358,     /* system call 11 */
+       EXCEP_SYSCALL12         = 0x000360,     /* system call 12 */
+       EXCEP_SYSCALL13         = 0x000368,     /* system call 13 */
+       EXCEP_SYSCALL14         = 0x000370,     /* system call 14 */
+       EXCEP_SYSCALL15         = 0x000378,     /* system call 15 */
+};
+
+extern void __set_intr_stub(enum exception_code code, void *handler);
+extern void set_intr_stub(enum exception_code code, void *handler);
+extern void set_jtag_stub(enum exception_code code, void *handler);
+
+struct pt_regs;
+
+extern asmlinkage void __common_exception(void);
+extern asmlinkage void itlb_miss(void);
+extern asmlinkage void dtlb_miss(void);
+extern asmlinkage void itlb_aerror(void);
+extern asmlinkage void dtlb_aerror(void);
+extern asmlinkage void raw_bus_error(void);
+extern asmlinkage void double_fault(void);
+extern asmlinkage int  system_call(struct pt_regs *);
+extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code);
+extern asmlinkage void nmi(struct pt_regs *, enum exception_code);
+extern asmlinkage void uninitialised_exception(struct pt_regs *,
+                                              enum exception_code);
+extern asmlinkage void irq_handler(void);
+extern asmlinkage void profile_handler(void);
+extern asmlinkage void nmi_handler(void);
+extern asmlinkage void misalignment(struct pt_regs *, enum exception_code);
+
+extern void die(const char *, struct pt_regs *, enum exception_code)
+       ATTRIB_NORET;
+
+extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_EXCEPTIONS_H */
diff --git a/include/asm-mn10300/fb.h b/include/asm-mn10300/fb.h
new file mode 100644 (file)
index 0000000..697b24a
--- /dev/null
@@ -0,0 +1,23 @@
+/* MN10300 Frame buffer stuff
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_FB_H
+#define _ASM_FB_H
+
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+       return 0;
+}
+
+#endif /* _ASM_FB_H */
diff --git a/include/asm-mn10300/fcntl.h b/include/asm-mn10300/fcntl.h
new file mode 100644 (file)
index 0000000..46ab12d
--- /dev/null
@@ -0,0 +1 @@
+#include <asm-generic/fcntl.h>
diff --git a/include/asm-mn10300/fpu.h b/include/asm-mn10300/fpu.h
new file mode 100644 (file)
index 0000000..64a2b83
--- /dev/null
@@ -0,0 +1,85 @@
+/* MN10300 FPU definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from include/asm-i386/i387.h: Copyright (C) 1994 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_FPU_H
+#define _ASM_FPU_H
+
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+#include <asm/user.h>
+
+#ifdef __KERNEL__
+
+/* the task that owns the FPU state */
+extern struct task_struct *fpu_state_owner;
+
+#define set_using_fpu(tsk)                             \
+do {                                                   \
+       (tsk)->thread.fpu_flags |= THREAD_USING_FPU;    \
+} while (0)
+
+#define clear_using_fpu(tsk)                           \
+do {                                                   \
+       (tsk)->thread.fpu_flags &= ~THREAD_USING_FPU;   \
+} while (0)
+
+#define is_using_fpu(tsk) ((tsk)->thread.fpu_flags & THREAD_USING_FPU)
+
+#define unlazy_fpu(tsk)                                        \
+do {                                                   \
+       preempt_disable();                              \
+       if (fpu_state_owner == (tsk))                   \
+               fpu_save(&tsk->thread.fpu_state);       \
+       preempt_enable();                               \
+} while (0)
+
+#define exit_fpu()                             \
+do {                                           \
+       struct task_struct *__tsk = current;    \
+       preempt_disable();                      \
+       if (fpu_state_owner == __tsk)           \
+               fpu_state_owner = NULL;         \
+       preempt_enable();                       \
+} while (0)
+
+#define flush_fpu()                                    \
+do {                                                   \
+       struct task_struct *__tsk = current;            \
+       preempt_disable();                              \
+       if (fpu_state_owner == __tsk) {                 \
+               fpu_state_owner = NULL;                 \
+               __tsk->thread.uregs->epsw &= ~EPSW_FE;  \
+       }                                               \
+       preempt_enable();                               \
+       clear_using_fpu(__tsk);                         \
+} while (0)
+
+extern asmlinkage void fpu_init_state(void);
+extern asmlinkage void fpu_kill_state(struct task_struct *);
+extern asmlinkage void fpu_disabled(struct pt_regs *, enum exception_code);
+extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code);
+
+#ifdef CONFIG_FPU
+extern asmlinkage void fpu_save(struct fpu_state_struct *);
+extern asmlinkage void fpu_restore(struct fpu_state_struct *);
+#else
+#define fpu_save(a)
+#define fpu_restore(a)
+#endif /* CONFIG_FPU  */
+
+/*
+ * signal frame handlers
+ */
+extern int fpu_setup_sigcontext(struct fpucontext *buf);
+extern int fpu_restore_sigcontext(struct fpucontext *buf);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_FPU_H */
diff --git a/include/asm-mn10300/frame.inc b/include/asm-mn10300/frame.inc
new file mode 100644 (file)
index 0000000..5b1949b
--- /dev/null
@@ -0,0 +1,91 @@
+/* MN10300 Microcontroller core system register definitions -*- asm -*-
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_FRAME_INC
+#define _ASM_FRAME_INC
+
+#ifndef __ASSEMBLY__
+#error not for use in C files
+#endif
+
+#ifndef __ASM_OFFSETS_H__
+#include <asm/asm-offsets.h>
+#endif
+
+#define pi break
+
+#define fp a3
+
+###############################################################################
+#
+# build a stack frame from the registers
+# - the caller has subtracted 4 from SP before coming here
+#
+###############################################################################
+.macro SAVE_ALL
+       add     -4,sp                           # next exception frame ptr save area
+       movm    [other],(sp)
+       mov     usp,a1
+       mov     a1,(sp)                         # USP in MOVM[other] dummy slot
+       movm    [d2,d3,a2,a3,exreg0,exreg1,exother],(sp)
+       mov     sp,fp                           # FRAME pointer in A3
+       add     -12,sp                          # allow for calls to be made
+       mov     (__frame),a1
+       mov     a1,(REG_NEXT,fp)
+       mov     fp,(__frame)
+
+       and     ~EPSW_FE,epsw                   # disable the FPU inside the kernel
+
+       # we may be holding current in E2
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+       mov     (__current),e2
+#endif
+.endm
+
+###############################################################################
+#
+# restore the registers from a stack frame
+#
+###############################################################################
+.macro RESTORE_ALL
+       # peel back the stack to the calling frame
+       # - this permits execve() to discard extra frames due to kernel syscalls
+       mov     (__frame),fp
+       mov     fp,sp
+       mov     (REG_NEXT,fp),d0                # userspace has regs->next == 0
+       mov     d0,(__frame)
+
+#ifndef CONFIG_MN10300_USING_JTAG
+       mov     (REG_EPSW,fp),d0
+       btst    EPSW_T,d0
+       beq     99f
+
+       or      EPSW_NMID,epsw
+       movhu   (DCR),d1
+       or      0x0001, d1
+       movhu   d1,(DCR)
+
+99:
+#endif
+       movm    (sp),[d2,d3,a2,a3,exreg0,exreg1,exother]
+
+       # must restore usp even if returning to kernel space,
+       # when CONFIG_PREEMPT is enabled.
+       mov     (sp),a1                         # USP in MOVM[other] dummy slot
+       mov     a1,usp
+
+       movm    (sp),[other]
+       add     8,sp
+       rti
+
+.endm
+
+
+#endif /* _ASM_FRAME_INC */
diff --git a/include/asm-mn10300/futex.h b/include/asm-mn10300/futex.h
new file mode 100644 (file)
index 0000000..0b74582
--- /dev/null
@@ -0,0 +1 @@
+#include <asm-generic/futex.h>
diff --git a/include/asm-mn10300/gdb-stub.h b/include/asm-mn10300/gdb-stub.h
new file mode 100644 (file)
index 0000000..e5a6368
--- /dev/null
@@ -0,0 +1,183 @@
+/* MN10300 Kernel GDB stub definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_GDB_STUB_H
+#define _ASM_GDB_STUB_H
+
+#include <asm/exceptions.h>
+
+/*
+ * register ID numbers in GDB remote protocol
+ */
+
+#define GDB_REGID_PC           9
+#define GDB_REGID_FP           7
+#define GDB_REGID_SP           8
+
+/*
+ * virtual stack layout for the GDB exception handler
+ */
+#define NUMREGS                        64
+
+#define GDB_FR_D0              (0 * 4)
+#define GDB_FR_D1              (1 * 4)
+#define GDB_FR_D2              (2 * 4)
+#define GDB_FR_D3              (3 * 4)
+#define GDB_FR_A0              (4 * 4)
+#define GDB_FR_A1              (5 * 4)
+#define GDB_FR_A2              (6 * 4)
+#define GDB_FR_A3              (7 * 4)
+
+#define GDB_FR_SP              (8 * 4)
+#define GDB_FR_PC              (9 * 4)
+#define GDB_FR_MDR             (10 * 4)
+#define GDB_FR_EPSW            (11 * 4)
+#define GDB_FR_LIR             (12 * 4)
+#define GDB_FR_LAR             (13 * 4)
+#define GDB_FR_MDRQ            (14 * 4)
+
+#define GDB_FR_E0              (15 * 4)
+#define GDB_FR_E1              (16 * 4)
+#define GDB_FR_E2              (17 * 4)
+#define GDB_FR_E3              (18 * 4)
+#define GDB_FR_E4              (19 * 4)
+#define GDB_FR_E5              (20 * 4)
+#define GDB_FR_E6              (21 * 4)
+#define GDB_FR_E7              (22 * 4)
+
+#define GDB_FR_SSP             (23 * 4)
+#define GDB_FR_MSP             (24 * 4)
+#define GDB_FR_USP             (25 * 4)
+#define GDB_FR_MCRH            (26 * 4)
+#define GDB_FR_MCRL            (27 * 4)
+#define GDB_FR_MCVF            (28 * 4)
+
+#define GDB_FR_FPCR            (29 * 4)
+#define GDB_FR_DUMMY0          (30 * 4)
+#define GDB_FR_DUMMY1          (31 * 4)
+
+#define GDB_FR_FS0             (32 * 4)
+
+#define GDB_FR_SIZE            (NUMREGS * 4)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This is the same as above, but for the high-level
+ * part of the GDB stub.
+ */
+
+struct gdb_regs {
+       /* saved main processor registers */
+       u32     d0, d1, d2, d3, a0, a1, a2, a3;
+       u32     sp, pc, mdr, epsw, lir, lar, mdrq;
+       u32     e0, e1, e2, e3, e4, e5, e6, e7;
+       u32     ssp, msp, usp, mcrh, mcrl, mcvf;
+
+       /* saved floating point registers */
+       u32     fpcr, _dummy0, _dummy1;
+       u32     fs0,  fs1,  fs2,  fs3,  fs4,  fs5,  fs6,  fs7;
+       u32     fs8,  fs9,  fs10, fs11, fs12, fs13, fs14, fs15;
+       u32     fs16, fs17, fs18, fs19, fs20, fs21, fs22, fs23;
+       u32     fs24, fs25, fs26, fs27, fs28, fs29, fs30, fs31;
+};
+
+/*
+ * Prototypes
+ */
+extern void show_registers_only(struct pt_regs *regs);
+
+extern asmlinkage void gdbstub_init(void);
+extern asmlinkage void gdbstub_exit(int status);
+extern asmlinkage void gdbstub_io_init(void);
+extern asmlinkage void gdbstub_io_set_baud(unsigned baud);
+extern asmlinkage int  gdbstub_io_rx_char(unsigned char *_ch, int nonblock);
+extern asmlinkage void gdbstub_io_tx_char(unsigned char ch);
+extern asmlinkage void gdbstub_io_tx_flush(void);
+
+extern asmlinkage void gdbstub_io_rx_handler(void);
+extern asmlinkage void gdbstub_rx_irq(struct pt_regs *, enum exception_code);
+extern asmlinkage int  gdbstub_intercept(struct pt_regs *, enum exception_code);
+extern asmlinkage void gdbstub_exception(struct pt_regs *, enum exception_code);
+extern asmlinkage void __gdbstub_bug_trap(void);
+extern asmlinkage void __gdbstub_pause(void);
+extern asmlinkage void start_kernel(void);
+
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+extern asmlinkage void gdbstub_purge_cache(void);
+#else
+#define gdbstub_purge_cache()  do {} while (0)
+#endif
+
+/* Used to prevent crashes in memory access */
+extern asmlinkage int  gdbstub_read_byte(const u8 *, u8 *);
+extern asmlinkage int  gdbstub_read_word(const u8 *, u8 *);
+extern asmlinkage int  gdbstub_read_dword(const u8 *, u8 *);
+extern asmlinkage int  gdbstub_write_byte(u32, u8 *);
+extern asmlinkage int  gdbstub_write_word(u32, u8 *);
+extern asmlinkage int  gdbstub_write_dword(u32, u8 *);
+
+extern asmlinkage void gdbstub_read_byte_guard(void);
+extern asmlinkage void gdbstub_read_byte_cont(void);
+extern asmlinkage void gdbstub_read_word_guard(void);
+extern asmlinkage void gdbstub_read_word_cont(void);
+extern asmlinkage void gdbstub_read_dword_guard(void);
+extern asmlinkage void gdbstub_read_dword_cont(void);
+extern asmlinkage void gdbstub_write_byte_guard(void);
+extern asmlinkage void gdbstub_write_byte_cont(void);
+extern asmlinkage void gdbstub_write_word_guard(void);
+extern asmlinkage void gdbstub_write_word_cont(void);
+extern asmlinkage void gdbstub_write_dword_guard(void);
+extern asmlinkage void gdbstub_write_dword_cont(void);
+
+extern u8      gdbstub_rx_buffer[PAGE_SIZE];
+extern u32     gdbstub_rx_inp;
+extern u32     gdbstub_rx_outp;
+extern u8      gdbstub_rx_overflow;
+extern u8      gdbstub_busy;
+extern u8      gdbstub_rx_unget;
+
+#ifdef CONFIG_GDBSTUB_DEBUGGING
+extern void gdbstub_printk(const char *fmt, ...)
+       __attribute__((format(printf, 1, 2)));
+#else
+static inline __attribute__((format(printf, 1, 2)))
+void gdbstub_printk(const char *fmt, ...)
+{
+}
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_ENTRY
+#define gdbstub_entry(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_entry(FMT, ...) ({ 0; })
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_PROTOCOL
+#define gdbstub_proto(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_proto(FMT, ...) ({ 0; })
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_IO
+#define gdbstub_io(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_io(FMT, ...) ({ 0; })
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_BREAKPOINT
+#define gdbstub_bkpt(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_bkpt(FMT, ...) ({ 0; })
+#endif
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_GDB_STUB_H */
diff --git a/include/asm-mn10300/hardirq.h b/include/asm-mn10300/hardirq.h
new file mode 100644 (file)
index 0000000..54d9501
--- /dev/null
@@ -0,0 +1,48 @@
+/* MN10300 Hardware IRQ statistics and management
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_HARDIRQ_H
+#define _ASM_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+#include <asm/exceptions.h>
+
+/* assembly code in softirq.h is sensitive to the offsets of these fields */
+typedef struct {
+       unsigned int    __softirq_pending;
+       unsigned long   idle_timestamp;
+       unsigned int    __nmi_count;    /* arch dependent */
+       unsigned int    __irq_count;    /* arch dependent */
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+extern void ack_bad_irq(int irq);
+
+/*
+ * manipulate stubs in the MN10300 CPU Trap/Interrupt Vector table
+ * - these should jump to __common_exception in entry.S unless there's a good
+ *   reason to do otherwise (see trap_preinit() in traps.c)
+ */
+typedef void (*intr_stub_fnx)(struct pt_regs *regs,
+                             enum exception_code intcode);
+
+/*
+ * manipulate pointers in the Exception table (see entry.S)
+ * - these are indexed by decoding the lower 24 bits of the TBR register
+ * - note that the MN103E010 doesn't always trap through the correct vector,
+ *   but does always set the TBR correctly
+ */
+extern asmlinkage void set_excp_vector(enum exception_code code,
+                                      intr_stub_fnx handler);
+
+#endif /* _ASM_HARDIRQ_H */
diff --git a/include/asm-mn10300/highmem.h b/include/asm-mn10300/highmem.h
new file mode 100644 (file)
index 0000000..383c0c4
--- /dev/null
@@ -0,0 +1,114 @@
+/* MN10300 Virtual kernel memory mappings for high memory
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-i386/highmem.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/kmap_types.h>
+#include <asm/pgtable.h>
+
+/* undef for production */
+#undef HIGHMEM_DEBUG
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+extern void __init kmap_init(void);
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#define PKMAP_BASE     0xfe000000UL
+#define LAST_PKMAP     1024
+#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
+#define PKMAP_NR(virt)  ((virt - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+extern unsigned long __fastcall kmap_high(struct page *page);
+extern void __fastcall kunmap_high(struct page *page);
+
+static inline unsigned long kmap(struct page *page)
+{
+       if (in_interrupt())
+               BUG();
+       if (page < highmem_start_page)
+               return page_address(page);
+       return kmap_high(page);
+}
+
+static inline void kunmap(struct page *page)
+{
+       if (in_interrupt())
+               BUG();
+       if (page < highmem_start_page)
+               return;
+       kunmap_high(page);
+}
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+static inline unsigned long kmap_atomic(struct page *page, enum km_type type)
+{
+       enum fixed_addresses idx;
+       unsigned long vaddr;
+
+       if (page < highmem_start_page)
+               return page_address(page);
+
+       idx = type + KM_TYPE_NR * smp_processor_id();
+       vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#if HIGHMEM_DEBUG
+       if (!pte_none(*(kmap_pte - idx)))
+               BUG();
+#endif
+       set_pte(kmap_pte - idx, mk_pte(page, kmap_prot));
+       __flush_tlb_one(vaddr);
+
+       return vaddr;
+}
+
+static inline void kunmap_atomic(unsigned long vaddr, enum km_type type)
+{
+#if HIGHMEM_DEBUG
+       enum fixed_addresses idx = type + KM_TYPE_NR * smp_processor_id();
+
+       if (vaddr < FIXADDR_START) /* FIXME */
+               return;
+
+       if (vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx))
+               BUG();
+
+       /*
+        * force other mappings to Oops if they'll try to access
+        * this pte without first remap it
+        */
+       pte_clear(kmap_pte - idx);
+       __flush_tlb_one(vaddr);
+#endif
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/include/asm-mn10300/hw_irq.h b/include/asm-mn10300/hw_irq.h
new file mode 100644 (file)
index 0000000..7061990
--- /dev/null
@@ -0,0 +1,14 @@
+/* MN10300 Hardware interrupt definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_HW_IRQ_H
+#define _ASM_HW_IRQ_H
+
+#endif /* _ASM_HW_IRQ_H */
diff --git a/include/asm-mn10300/ide.h b/include/asm-mn10300/ide.h
new file mode 100644 (file)
index 0000000..dc23512
--- /dev/null
@@ -0,0 +1,43 @@
+/* MN10300 Arch-specific IDE code
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-i386/ide.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_IDE_H
+#define _ASM_IDE_H
+
+#ifdef __KERNEL__
+
+#include <asm/intctl-regs.h>
+
+#undef SUPPORT_SLOW_DATA_PORTS
+#define SUPPORT_SLOW_DATA_PORTS 0
+
+#undef SUPPORT_VLB_SYNC
+#define SUPPORT_VLB_SYNC 0
+
+#ifndef MAX_HWIFS
+#define MAX_HWIFS 8
+#endif
+
+/*
+ * some bits needed for parts of the IDE subsystem to compile
+ */
+#define __ide_mm_insw(port, addr, n) \
+       insw((unsigned long) (port), (addr), (n))
+#define __ide_mm_insl(port, addr, n) \
+       insl((unsigned long) (port), (addr), (n))
+#define __ide_mm_outsw(port, addr, n) \
+       outsw((unsigned long) (port), (addr), (n))
+#define __ide_mm_outsl(port, addr, n) \
+       outsl((unsigned long) (port), (addr), (n))
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_IDE_H */
diff --git a/include/asm-mn10300/intctl-regs.h b/include/asm-mn10300/intctl-regs.h
new file mode 100644 (file)
index 0000000..ba544c7
--- /dev/null
@@ -0,0 +1,73 @@
+/* MN10300 On-board interrupt controller registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_INTCTL_REGS_H
+#define _ASM_INTCTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* interrupt controller registers */
+#define GxICR(X)               __SYSREG(0xd4000000 + (X) * 4, u16)     /* group irq ctrl regs */
+
+#define IAGR                   __SYSREG(0xd4000100, u16)       /* intr acceptance group reg */
+#define IAGR_GN                        0x00fc          /* group number register
+                                                * (documentation _has_ to be wrong)
+                                                */
+
+#define EXTMD                  __SYSREG(0xd4000200, u16)       /* external pin intr spec reg */
+#define GET_XIRQ_TRIGGER(X) ((EXTMD >> ((X) * 2)) & 3)
+
+#define SET_XIRQ_TRIGGER(X,Y)                  \
+do {                                           \
+       u16 x = EXTMD;                          \
+       x &= ~(3 << ((X) * 2));                 \
+       x |= ((Y) & 3) << ((X) * 2);            \
+       EXTMD = x;                              \
+} while (0)
+
+#define XIRQ_TRIGGER_LOWLEVEL  0
+#define XIRQ_TRIGGER_HILEVEL   1
+#define XIRQ_TRIGGER_NEGEDGE   2
+#define XIRQ_TRIGGER_POSEDGE   3
+
+/* non-maskable interrupt control */
+#define NMIIRQ                 0
+#define NMICR                  GxICR(NMIIRQ)   /* NMI control register */
+#define NMICR_NMIF             0x0001          /* NMI pin interrupt flag */
+#define NMICR_WDIF             0x0002          /* watchdog timer overflow flag */
+#define NMICR_ABUSERR          0x0008          /* async bus error flag */
+
+/* maskable interrupt control */
+#define GxICR_DETECT           0x0001          /* interrupt detect flag */
+#define GxICR_REQUEST          0x0010          /* interrupt request flag */
+#define GxICR_ENABLE           0x0100          /* interrupt enable flag */
+#define GxICR_LEVEL            0x7000          /* interrupt priority level */
+#define GxICR_LEVEL_0          0x0000          /* - level 0 */
+#define GxICR_LEVEL_1          0x1000          /* - level 1 */
+#define GxICR_LEVEL_2          0x2000          /* - level 2 */
+#define GxICR_LEVEL_3          0x3000          /* - level 3 */
+#define GxICR_LEVEL_4          0x4000          /* - level 4 */
+#define GxICR_LEVEL_5          0x5000          /* - level 5 */
+#define GxICR_LEVEL_6          0x6000          /* - level 6 */
+#define GxICR_LEVEL_SHIFT      12
+
+#ifndef __ASSEMBLY__
+extern void set_intr_level(int irq, u16 level);
+extern void set_intr_postackable(int irq);
+#endif
+
+/* external interrupts */
+#define XIRQxICR(X)            GxICR((X))      /* external interrupt control regs */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_INTCTL_REGS_H */
diff --git a/include/asm-mn10300/io.h b/include/asm-mn10300/io.h
new file mode 100644 (file)
index 0000000..b8b6dc8
--- /dev/null
@@ -0,0 +1,299 @@
+/* MN10300 I/O port emulation and memory-mapped I/O
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+
+#include <asm/page.h> /* I/O is all done through memory accesses */
+#include <asm/cpu-regs.h>
+#include <asm/cacheflush.h>
+
+#define mmiowb() do {} while (0)
+
+/*****************************************************************************/
+/*
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the x86 architecture, we just read/write the
+ * memory location directly.
+ */
+static inline u8 readb(const volatile void __iomem *addr)
+{
+       return *(const volatile u8 *) addr;
+}
+
+static inline u16 readw(const volatile void __iomem *addr)
+{
+       return *(const volatile u16 *) addr;
+}
+
+static inline u32 readl(const volatile void __iomem *addr)
+{
+       return *(const volatile u32 *) addr;
+}
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+
+#define readb_relaxed readb
+#define readw_relaxed readw
+#define readl_relaxed readl
+
+static inline void writeb(u8 b, volatile void __iomem *addr)
+{
+       *(volatile u8 *) addr = b;
+}
+
+static inline void writew(u16 b, volatile void __iomem *addr)
+{
+       *(volatile u16 *) addr = b;
+}
+
+static inline void writel(u32 b, volatile void __iomem *addr)
+{
+       *(volatile u32 *) addr = b;
+}
+
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+/*****************************************************************************/
+/*
+ * traditional input/output functions
+ */
+static inline u8 inb_local(unsigned long addr)
+{
+       return readb((volatile void __iomem *) addr);
+}
+
+static inline void outb_local(u8 b, unsigned long addr)
+{
+       return writeb(b, (volatile void __iomem *) addr);
+}
+
+static inline u8 inb(unsigned long addr)
+{
+       return readb((volatile void __iomem *) addr);
+}
+
+static inline u16 inw(unsigned long addr)
+{
+       return readw((volatile void __iomem *) addr);
+}
+
+static inline u32 inl(unsigned long addr)
+{
+       return readl((volatile void __iomem *) addr);
+}
+
+static inline void outb(u8 b, unsigned long addr)
+{
+       return writeb(b, (volatile void __iomem *) addr);
+}
+
+static inline void outw(u16 b, unsigned long addr)
+{
+       return writew(b, (volatile void __iomem *) addr);
+}
+
+static inline void outl(u32 b, unsigned long addr)
+{
+       return writel(b, (volatile void __iomem *) addr);
+}
+
+#define inb_p(addr)    inb(addr)
+#define inw_p(addr)    inw(addr)
+#define inl_p(addr)    inl(addr)
+#define outb_p(x, addr)        outb((x), (addr))
+#define outw_p(x, addr)        outw((x), (addr))
+#define outl_p(x, addr)        outl((x), (addr))
+
+static inline void insb(unsigned long addr, void *buffer, int count)
+{
+       if (count) {
+               u8 *buf = buffer;
+               do {
+                       u8 x = inb(addr);
+                       *buf++ = x;
+               } while (--count);
+       }
+}
+
+static inline void insw(unsigned long addr, void *buffer, int count)
+{
+       if (count) {
+               u16 *buf = buffer;
+               do {
+                       u16 x = inw(addr);
+                       *buf++ = x;
+               } while (--count);
+       }
+}
+
+static inline void insl(unsigned long addr, void *buffer, int count)
+{
+       if (count) {
+               u32 *buf = buffer;
+               do {
+                       u32 x = inl(addr);
+                       *buf++ = x;
+               } while (--count);
+       }
+}
+
+static inline void outsb(unsigned long addr, const void *buffer, int count)
+{
+       if (count) {
+               const u8 *buf = buffer;
+               do {
+                       outb(*buf++, addr);
+               } while (--count);
+       }
+}
+
+static inline void outsw(unsigned long addr, const void *buffer, int count)
+{
+       if (count) {
+               const u16 *buf = buffer;
+               do {
+                       outw(*buf++, addr);
+               } while (--count);
+       }
+}
+
+extern void __outsl(unsigned long addr, const void *buffer, int count);
+static inline void outsl(unsigned long addr, const void *buffer, int count)
+{
+       if ((unsigned long) buffer & 0x3)
+               return __outsl(addr, buffer, count);
+
+       if (count) {
+               const u32 *buf = buffer;
+               do {
+                       outl(*buf++, addr);
+               } while (--count);
+       }
+}
+
+#define ioread8(addr)          readb(addr)
+#define ioread16(addr)         readw(addr)
+#define ioread32(addr)         readl(addr)
+
+#define iowrite8(v, addr)      writeb((v), (addr))
+#define iowrite16(v, addr)     writew((v), (addr))
+#define iowrite32(v, addr)     writel((v), (addr))
+
+#define ioread8_rep(p, dst, count) \
+       insb((unsigned long) (p), (dst), (count))
+#define ioread16_rep(p, dst, count) \
+       insw((unsigned long) (p), (dst), (count))
+#define ioread32_rep(p, dst, count) \
+       insl((unsigned long) (p), (dst), (count))
+
+#define iowrite8_rep(p, src, count) \
+       outsb((unsigned long) (p), (src), (count))
+#define iowrite16_rep(p, src, count) \
+       outsw((unsigned long) (p), (src), (count))
+#define iowrite32_rep(p, src, count) \
+       outsl((unsigned long) (p), (src), (count))
+
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#ifdef __KERNEL__
+
+#include <linux/vmalloc.h>
+#define __io_virt(x) ((void *) (x))
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p)
+{
+}
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are pretty trivial
+ */
+static inline unsigned long virt_to_phys(volatile void *address)
+{
+       return __pa(address);
+}
+
+static inline void *phys_to_virt(unsigned long address)
+{
+       return __va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+static inline void *__ioremap(unsigned long offset, unsigned long size,
+                             unsigned long flags)
+{
+       return (void *) offset;
+}
+
+static inline void *ioremap(unsigned long offset, unsigned long size)
+{
+       return (void *) offset;
+}
+
+/*
+ * This one maps high address device memory and turns off caching for that
+ * area.  it's useful if some control registers are in such an area and write
+ * combining or read caching is not desirable:
+ */
+static inline void *ioremap_nocache(unsigned long offset, unsigned long size)
+{
+       return (void *) (offset | 0x20000000);
+}
+
+static inline void iounmap(void *addr)
+{
+}
+
+static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+       return (void __iomem *) port;
+}
+
+static inline void ioport_unmap(void __iomem *p)
+{
+}
+
+#define xlate_dev_kmem_ptr(p)  ((void *) (p))
+#define xlate_dev_mem_ptr(p)   ((void *) (p))
+
+/*
+ * PCI bus iomem addresses must be in the region 0x80000000-0x9fffffff
+ */
+static inline unsigned long virt_to_bus(volatile void *address)
+{
+       return ((unsigned long) address) & ~0x20000000;
+}
+
+static inline void *bus_to_virt(unsigned long address)
+{
+       return (void *) address;
+}
+
+#define page_to_bus page_to_phys
+
+#define memset_io(a, b, c)     memset(__io_virt(a), (b), (c))
+#define memcpy_fromio(a, b, c) memcpy((a), __io_virt(b), (c))
+#define memcpy_toio(a, b, c)   memcpy(__io_virt(a), (b), (c))
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IO_H */
diff --git a/include/asm-mn10300/ioctl.h b/include/asm-mn10300/ioctl.h
new file mode 100644 (file)
index 0000000..b279fe0
--- /dev/null
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/include/asm-mn10300/ioctls.h b/include/asm-mn10300/ioctls.h
new file mode 100644 (file)
index 0000000..dcbfb45
--- /dev/null
@@ -0,0 +1,88 @@
+#ifndef _ASM_IOCTLS_H
+#define _ASM_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS         0x5401
+#define TCSETS         0x5402
+#define TCSETSW                0x5403
+#define TCSETSF                0x5404
+#define TCGETA         0x5405
+#define TCSETA         0x5406
+#define TCSETAW                0x5407
+#define TCSETAF                0x5408
+#define TCSBRK         0x5409
+#define TCXONC         0x540A
+#define TCFLSH         0x540B
+#define TIOCEXCL       0x540C
+#define TIOCNXCL       0x540D
+#define TIOCSCTTY      0x540E
+#define TIOCGPGRP      0x540F
+#define TIOCSPGRP      0x5410
+#define TIOCOUTQ       0x5411
+#define TIOCSTI                0x5412
+#define TIOCGWINSZ     0x5413
+#define TIOCSWINSZ     0x5414
+#define TIOCMGET       0x5415
+#define TIOCMBIS       0x5416
+#define TIOCMBIC       0x5417
+#define TIOCMSET       0x5418
+#define TIOCGSOFTCAR   0x5419
+#define TIOCSSOFTCAR   0x541A
+#define FIONREAD       0x541B
+#define TIOCINQ                FIONREAD
+#define TIOCLINUX      0x541C
+#define TIOCCONS       0x541D
+#define TIOCGSERIAL    0x541E
+#define TIOCSSERIAL    0x541F
+#define TIOCPKT                0x5420
+#define FIONBIO                0x5421
+#define TIOCNOTTY      0x5422
+#define TIOCSETD       0x5423
+#define TIOCGETD       0x5424
+#define TCSBRKP                0x5425  /* Needed for POSIX tcsendbreak() */
+/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
+#define TIOCSBRK       0x5427  /* BSD compatibility */
+#define TIOCCBRK       0x5428  /* BSD compatibility */
+#define TIOCGSID       0x5429  /* Return the session ID of FD */
+#define TCGETS2                _IOR('T', 0x2A, struct termios2)
+#define TCSETS2                _IOW('T', 0x2B, struct termios2)
+#define TCSETSW2       _IOW('T', 0x2C, struct termios2)
+#define TCSETSF2       _IOW('T', 0x2D, struct termios2)
+#define TIOCGPTN       _IOR('T', 0x30, unsigned int) /* Get Pty Number
+                                                      * (of pty-mux device) */
+#define TIOCSPTLCK     _IOW('T', 0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX       0x5450
+#define FIOCLEX                0x5451
+#define FIOASYNC       0x5452
+#define TIOCSERCONFIG  0x5453
+#define TIOCSERGWILD   0x5454
+#define TIOCSERSWILD   0x5455
+#define TIOCGLCKTRMIOS 0x5456
+#define TIOCSLCKTRMIOS 0x5457
+#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT     0x545C  /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT    0x545D  /* read serial port inline interrupt counts */
+#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
+#define FIOQSIZE       0x5460
+
+/* Used for packet mode */
+#define TIOCPKT_DATA            0
+#define TIOCPKT_FLUSHREAD       1
+#define TIOCPKT_FLUSHWRITE      2
+#define TIOCPKT_STOP            4
+#define TIOCPKT_START           8
+#define TIOCPKT_NOSTOP         16
+#define TIOCPKT_DOSTOP         32
+
+#define TIOCSER_TEMT    0x01   /* Transmitter physically empty */
+
+#endif /* _ASM_IOCTLS_H */
diff --git a/include/asm-mn10300/ipc.h b/include/asm-mn10300/ipc.h
new file mode 100644 (file)
index 0000000..a46e3d9
--- /dev/null
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-mn10300/ipcbuf.h b/include/asm-mn10300/ipcbuf.h
new file mode 100644 (file)
index 0000000..efbbef8
--- /dev/null
@@ -0,0 +1,29 @@
+#ifndef _ASM_IPCBUF_H_
+#define _ASM_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+       __kernel_key_t          key;
+       __kernel_uid32_t        uid;
+       __kernel_gid32_t        gid;
+       __kernel_uid32_t        cuid;
+       __kernel_gid32_t        cgid;
+       __kernel_mode_t         mode;
+       unsigned short          __pad1;
+       unsigned short          seq;
+       unsigned short          __pad2;
+       unsigned long           __unused1;
+       unsigned long           __unused2;
+};
+
+#endif /* _ASM_IPCBUF_H */
diff --git a/include/asm-mn10300/irq.h b/include/asm-mn10300/irq.h
new file mode 100644 (file)
index 0000000..53b3801
--- /dev/null
@@ -0,0 +1,32 @@
+/* MN10300 Hardware interrupt definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-i386/irq.h:
+ *   - (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+
+#include <asm/intctl-regs.h>
+#include <asm/reset-regs.h>
+#include <asm/proc/irq.h>
+
+/* this number is used when no interrupt has been assigned */
+#define NO_IRQ         INT_MAX
+
+/* hardware irq numbers */
+#define NR_IRQS                GxICR_NUM_IRQS
+
+/* external hardware irq numbers */
+#define NR_XIRQS       GxICR_NUM_XIRQS
+
+#define irq_canonicalize(IRQ) (IRQ)
+
+#endif /* _ASM_IRQ_H */
diff --git a/include/asm-mn10300/irq_regs.h b/include/asm-mn10300/irq_regs.h
new file mode 100644 (file)
index 0000000..a848cd2
--- /dev/null
@@ -0,0 +1,24 @@
+/* MN10300 IRQ registers pointer definition
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_IRQ_REGS_H
+#define _ASM_IRQ_REGS_H
+
+/*
+ * Per-cpu current frame pointer - the location of the last exception frame on
+ * the stack
+ */
+#define ARCH_HAS_OWN_IRQ_REGS
+
+#ifndef __ASSEMBLY__
+#define get_irq_regs() (__frame)
+#endif
+
+#endif /* _ASM_IRQ_REGS_H */
diff --git a/include/asm-mn10300/kdebug.h b/include/asm-mn10300/kdebug.h
new file mode 100644 (file)
index 0000000..0f47e11
--- /dev/null
@@ -0,0 +1,22 @@
+/* MN10300 In-kernel death knells
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_KDEBUG_H
+#define _ASM_KDEBUG_H
+
+/* Grossly misnamed. */
+enum die_val {
+       DIE_OOPS = 1,
+       DIE_BREAKPOINT,
+       DIE_GPF,
+};
+
+#endif /* _ASM_KDEBUG_H */
diff --git a/include/asm-mn10300/kmap_types.h b/include/asm-mn10300/kmap_types.h
new file mode 100644 (file)
index 0000000..3398f9f
--- /dev/null
@@ -0,0 +1,31 @@
+/* MN10300 kmap_atomic() slot IDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+       KM_BOUNCE_READ,
+       KM_SKB_SUNRPC_DATA,
+       KM_SKB_DATA_SOFTIRQ,
+       KM_USER0,
+       KM_USER1,
+       KM_BIO_SRC_IRQ,
+       KM_BIO_DST_IRQ,
+       KM_PTE0,
+       KM_PTE1,
+       KM_IRQ0,
+       KM_IRQ1,
+       KM_SOFTIRQ0,
+       KM_SOFTIRQ1,
+       KM_TYPE_NR
+};
+
+#endif /* _ASM_KMAP_TYPES_H */
diff --git a/include/asm-mn10300/kprobes.h b/include/asm-mn10300/kprobes.h
new file mode 100644 (file)
index 0000000..c800b59
--- /dev/null
@@ -0,0 +1,50 @@
+/* MN10300 Kernel Probes support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public Licence as published by
+ * the Free Software Foundation; either version 2 of the Licence, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public Licence for more details.
+ *
+ * You should have received a copy of the GNU General Public Licence
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+#ifndef _ASM_KPROBES_H
+#define _ASM_KPROBES_H
+
+#include <linux/types.h>
+#include <linux/ptrace.h>
+
+struct kprobe;
+
+typedef unsigned char kprobe_opcode_t;
+#define BREAKPOINT_INSTRUCTION 0xff
+#define MAX_INSN_SIZE 8
+#define MAX_STACK_SIZE 128
+
+/* Architecture specific copy of original instruction */
+struct arch_specific_insn {
+       /*  copy of original instruction
+        */
+       kprobe_opcode_t insn[MAX_INSN_SIZE];
+};
+
+extern const int kretprobe_blacklist_size;
+
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+                                   unsigned long val, void *data);
+
+#define flush_insn_slot(p)  do {} while (0)
+
+extern void arch_remove_kprobe(struct kprobe *p);
+
+#endif /* _ASM_KPROBES_H */
diff --git a/include/asm-mn10300/linkage.h b/include/asm-mn10300/linkage.h
new file mode 100644 (file)
index 0000000..29a32e4
--- /dev/null
@@ -0,0 +1,22 @@
+/* MN10300 Linkage and calling-convention overrides
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_LINKAGE_H
+#define _ASM_LINKAGE_H
+
+/* don't override anything */
+#define asmlinkage
+#define FASTCALL(x) x
+#define fastcall
+
+#define __ALIGN                .align 4,0xcb
+#define __ALIGN_STR    ".align 4,0xcb"
+
+#endif
diff --git a/include/asm-mn10300/local.h b/include/asm-mn10300/local.h
new file mode 100644 (file)
index 0000000..c11c530
--- /dev/null
@@ -0,0 +1 @@
+#include <asm-generic/local.h>
diff --git a/include/asm-mn10300/mc146818rtc.h b/include/asm-mn10300/mc146818rtc.h
new file mode 100644 (file)
index 0000000..df6bc6e
--- /dev/null
@@ -0,0 +1 @@
+#include <asm/rtc-regs.h>
diff --git a/include/asm-mn10300/mman.h b/include/asm-mn10300/mman.h
new file mode 100644 (file)
index 0000000..b7986b6
--- /dev/null
@@ -0,0 +1,28 @@
+/* MN10300 Constants for mmap and co.
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * - Derived from asm-x86/mman.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_MMAN_H
+#define _ASM_MMAN_H
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN  0x0100          /* stack-like segment */
+#define MAP_DENYWRITE  0x0800          /* ETXTBSY */
+#define MAP_EXECUTABLE 0x1000          /* mark it as an executable */
+#define MAP_LOCKED     0x2000          /* pages are locked */
+#define MAP_NORESERVE  0x4000          /* don't check for reservations */
+#define MAP_POPULATE   0x8000          /* populate (prefault) pagetables */
+#define MAP_NONBLOCK   0x10000         /* do not block on IO */
+
+#define MCL_CURRENT    1               /* lock all current mappings */
+#define MCL_FUTURE     2               /* lock all future mappings */
+
+#endif /* _ASM_MMAN_H */
diff --git a/include/asm-mn10300/mmu.h b/include/asm-mn10300/mmu.h
new file mode 100644 (file)
index 0000000..2d2d097
--- /dev/null
@@ -0,0 +1,19 @@
+/* MN10300 Memory management context
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-frv/mmu.h
+ */
+
+#ifndef _ASM_MMU_H
+#define _ASM_MMU_H
+
+/*
+ * MMU context
+ */
+typedef struct {
+       unsigned long   tlbpid[NR_CPUS];        /* TLB PID for this process on
+                                                * each CPU */
+} mm_context_t;
+
+#endif /* _ASM_MMU_H */
diff --git a/include/asm-mn10300/mmu_context.h b/include/asm-mn10300/mmu_context.h
new file mode 100644 (file)
index 0000000..a9e2e34
--- /dev/null
@@ -0,0 +1,138 @@
+/* MN10300 MMU context management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-m32r/mmu_context.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ *
+ * This implements an algorithm to provide TLB PID mappings to provide
+ * selective access to the TLB for processes, thus reducing the number of TLB
+ * flushes required.
+ *
+ * Note, however, that the M32R algorithm is technically broken as it does not
+ * handle version wrap-around, and could, theoretically, have a problem with a
+ * very long lived program that sleeps long enough for the version number to
+ * wrap all the way around so that its TLB mappings appear valid once again.
+ */
+#ifndef _ASM_MMU_CONTEXT_H
+#define _ASM_MMU_CONTEXT_H
+
+#include <asm/atomic.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm-generic/mm_hooks.h>
+
+#define MMU_CONTEXT_TLBPID_MASK                0x000000ffUL
+#define MMU_CONTEXT_VERSION_MASK       0xffffff00UL
+#define MMU_CONTEXT_FIRST_VERSION      0x00000100UL
+#define MMU_NO_CONTEXT                 0x00000000UL
+
+extern unsigned long mmu_context_cache[NR_CPUS];
+#define mm_context(mm) (mm->context.tlbpid[smp_processor_id()])
+
+#define enter_lazy_tlb(mm, tsk)        do {} while (0)
+
+#ifdef CONFIG_SMP
+#define cpu_ran_vm(cpu, task) \
+       cpu_set((cpu), (task)->cpu_vm_mask)
+#define cpu_maybe_ran_vm(cpu, task) \
+       cpu_test_and_set((cpu), (task)->cpu_vm_mask)
+#else
+#define cpu_ran_vm(cpu, task)          do {} while (0)
+#define cpu_maybe_ran_vm(cpu, task)    true
+#endif /* CONFIG_SMP */
+
+/*
+ * allocate an MMU context
+ */
+static inline unsigned long allocate_mmu_context(struct mm_struct *mm)
+{
+       unsigned long *pmc = &mmu_context_cache[smp_processor_id()];
+       unsigned long mc = ++(*pmc);
+
+       if (!(mc & MMU_CONTEXT_TLBPID_MASK)) {
+               /* we exhausted the TLB PIDs of this version on this CPU, so we
+                * flush this CPU's TLB in its entirety and start new cycle */
+               flush_tlb_all();
+
+               /* fix the TLB version if needed (we avoid version #0 so as to
+                * distingush MMU_NO_CONTEXT) */
+               if (!mc)
+                       *pmc = mc = MMU_CONTEXT_FIRST_VERSION;
+       }
+       mm_context(mm) = mc;
+       return mc;
+}
+
+/*
+ * get an MMU context if one is needed
+ */
+static inline unsigned long get_mmu_context(struct mm_struct *mm)
+{
+       unsigned long mc = MMU_NO_CONTEXT, cache;
+
+       if (mm) {
+               cache = mmu_context_cache[smp_processor_id()];
+               mc = mm_context(mm);
+
+               /* if we have an old version of the context, replace it */
+               if ((mc ^ cache) & MMU_CONTEXT_VERSION_MASK)
+                       mc = allocate_mmu_context(mm);
+       }
+       return mc;
+}
+
+/*
+ * initialise the context related info for a new mm_struct instance
+ */
+static inline int init_new_context(struct task_struct *tsk,
+                                  struct mm_struct *mm)
+{
+       int num_cpus = NR_CPUS, i;
+
+       for (i = 0; i < num_cpus; i++)
+               mm->context.tlbpid[i] = MMU_NO_CONTEXT;
+       return 0;
+}
+
+/*
+ * destroy context related info for an mm_struct that is about to be put to
+ * rest
+ */
+#define destroy_context(mm)    do { } while (0)
+
+/*
+ * after we have set current->mm to a new value, this activates the context for
+ * the new mm so we see the new mappings.
+ */
+static inline void activate_context(struct mm_struct *mm, int cpu)
+{
+       PIDR = get_mmu_context(mm) & MMU_CONTEXT_TLBPID_MASK;
+}
+
+/*
+ * change between virtual memory sets
+ */
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+                            struct task_struct *tsk)
+{
+       int cpu = smp_processor_id();
+
+       if (prev != next) {
+               cpu_ran_vm(cpu, next);
+               activate_context(next, cpu);
+               PTBR = (unsigned long) next->pgd;
+       } else if (!cpu_maybe_ran_vm(cpu, next)) {
+               activate_context(next, cpu);
+       }
+}
+
+#define deactivate_mm(tsk, mm) do {} while (0)
+#define activate_mm(prev, next)        switch_mm((prev), (next), NULL)
+
+#endif /* _ASM_MMU_CONTEXT_H */
diff --git a/include/asm-mn10300/module.h b/include/asm-mn10300/module.h
new file mode 100644 (file)
index 0000000..5d7057d
--- /dev/null
@@ -0,0 +1,27 @@
+/* MN10300 Arch-specific module definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ * Derived from include/asm-i386/module.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_MODULE_H
+#define _ASM_MODULE_H
+
+struct mod_arch_specific {
+};
+
+#define Elf_Shdr       Elf32_Shdr
+#define Elf_Sym                Elf32_Sym
+#define Elf_Ehdr       Elf32_Ehdr
+
+/*
+ * Include the MN10300 architecture version.
+ */
+#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " "
+
+#endif /* _ASM_MODULE_H */
diff --git a/include/asm-mn10300/msgbuf.h b/include/asm-mn10300/msgbuf.h
new file mode 100644 (file)
index 0000000..8b60245
--- /dev/null
@@ -0,0 +1,31 @@
+#ifndef _ASM_MSGBUF_H
+#define _ASM_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+       struct ipc64_perm       msg_perm;
+       __kernel_time_t         msg_stime;      /* last msgsnd time */
+       unsigned long           __unused1;
+       __kernel_time_t         msg_rtime;      /* last msgrcv time */
+       unsigned long           __unused2;
+       __kernel_time_t         msg_ctime;      /* last change time */
+       unsigned long           __unused3;
+       unsigned long           msg_cbytes;     /* current number of bytes on queue */
+       unsigned long           msg_qnum;       /* number of messages in queue */
+       unsigned long           msg_qbytes;     /* max number of bytes on queue */
+       __kernel_pid_t          msg_lspid;      /* pid of last msgsnd */
+       __kernel_pid_t          msg_lrpid;      /* last receive pid */
+       unsigned long           __unused4;
+       unsigned long           __unused5;
+};
+
+#endif /* _ASM_MSGBUF_H */
diff --git a/include/asm-mn10300/mutex.h b/include/asm-mn10300/mutex.h
new file mode 100644 (file)
index 0000000..84f5490
--- /dev/null
@@ -0,0 +1,16 @@
+/* MN10300 Mutex fastpath
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+#include <asm-generic/mutex-null.h>
diff --git a/include/asm-mn10300/namei.h b/include/asm-mn10300/namei.h
new file mode 100644 (file)
index 0000000..bd9ce94
--- /dev/null
@@ -0,0 +1,22 @@
+/* Emulation stuff
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_NAMEI_H
+#define _ASM_NAMEI_H
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif /* _ASM_NAMEI_H */
diff --git a/include/asm-mn10300/nmi.h b/include/asm-mn10300/nmi.h
new file mode 100644 (file)
index 0000000..f3671cb
--- /dev/null
@@ -0,0 +1,14 @@
+/* MN10300 NMI handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_NMI_H
+#define _ASM_NMI_H
+
+#endif /* _ASM_NMI_H */
diff --git a/include/asm-mn10300/page.h b/include/asm-mn10300/page.h
new file mode 100644 (file)
index 0000000..124971b
--- /dev/null
@@ -0,0 +1,131 @@
+/* MN10300 Page table definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PAGE_H
+#define _ASM_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT     12
+
+#ifndef __ASSEMBLY__
+#define PAGE_SIZE      (1UL << PAGE_SHIFT)
+#define PAGE_MASK      (~(PAGE_SIZE - 1))
+#else
+#define PAGE_SIZE      +(1 << PAGE_SHIFT)      /* unary plus marks an
+                                                * immediate val not an addr */
+#define PAGE_MASK      +(~(PAGE_SIZE - 1))
+#endif
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#define clear_page(page)       memset((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to, from)    memcpy((void *)(to), (void *)(from), PAGE_SIZE)
+
+#define clear_user_page(addr, vaddr, page)     clear_page(addr)
+#define copy_user_page(vto, vfrom, vaddr, to)  copy_page(vto, vfrom)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define PTE_MASK       PAGE_MASK
+#define HPAGE_SHIFT    22
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SIZE             ((1UL) << HPAGE_SHIFT)
+#define HPAGE_MASK             (~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER     (HPAGE_SHIFT - PAGE_SHIFT)
+#endif
+
+#define pte_val(x)     ((x).pte)
+#define pgd_val(x)     ((x).pgd)
+#define pgprot_val(x)  ((x).pgprot)
+
+#define __pte(x)       ((pte_t) { (x) })
+#define __pgd(x)       ((pgd_t) { (x) })
+#define __pgprot(x)    ((pgprot_t) { (x) })
+
+#include <asm-generic/pgtable-nopmd.h>
+
+#endif /* !__ASSEMBLY__ */
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)       (((addr) + PAGE_SIZE - 1) & PAGE_MASK)
+
+/*
+ * This handles the memory map.. We could make this a config
+ * option, but too many people screw it up, and too few need
+ * it.
+ *
+ * A __PAGE_OFFSET of 0xC0000000 means that the kernel has
+ * a virtual address space of one gigabyte, which limits the
+ * amount of physical memory you can use to about 950MB.
+ */
+
+#ifndef __ASSEMBLY__
+
+/* Pure 2^n version of get_order */
+static inline int get_order(unsigned long size) __attribute__((const));
+static inline int get_order(unsigned long size)
+{
+       int order;
+
+       size = (size - 1) >> (PAGE_SHIFT - 1);
+       order = -1;
+       do {
+               size >>= 1;
+               order++;
+       } while (size);
+       return order;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+
+#define __PAGE_OFFSET          (PAGE_OFFSET_RAW)
+#define PAGE_OFFSET            ((unsigned long) __PAGE_OFFSET)
+
+/*
+ * main RAM and kernel working space are coincident at 0x90000000, but to make
+ * life more interesting, there's also an uncached virtual shadow at 0xb0000000
+ * - these mappings are fixed in the MMU
+ */
+#define __pfn_disp             (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT)
+
+#define __pa(x)                        ((unsigned long)(x))
+#define __va(x)                        ((void *)(unsigned long)(x))
+#define pfn_to_kaddr(pfn)      __va((pfn) << PAGE_SHIFT)
+#define pfn_to_page(pfn)       (mem_map + ((pfn) - __pfn_disp))
+#define page_to_pfn(page)      ((unsigned long)((page) - mem_map) + __pfn_disp)
+
+#define pfn_valid(pfn)                                 \
+({                                                     \
+       unsigned long __pfn = (pfn) - __pfn_disp;       \
+       __pfn < max_mapnr;                              \
+})
+
+#define virt_to_page(kaddr)    pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+#define page_to_phys(page)     (page_to_pfn(page) << PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS \
+       (VM_READ | VM_WRITE | \
+       ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
+                VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PAGE_H */
diff --git a/include/asm-mn10300/page_offset.h b/include/asm-mn10300/page_offset.h
new file mode 100644 (file)
index 0000000..8eb5b16
--- /dev/null
@@ -0,0 +1,11 @@
+/* MN10300 Kernel base address
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ */
+#ifndef _ASM_PAGE_OFFSET_H
+#define _ASM_PAGE_OFFSET_H
+
+#define PAGE_OFFSET_RAW CONFIG_KERNEL_RAM_BASE_ADDRESS
+
+#endif
diff --git a/include/asm-mn10300/param.h b/include/asm-mn10300/param.h
new file mode 100644 (file)
index 0000000..54b883e
--- /dev/null
@@ -0,0 +1,34 @@
+/* MN10300 Kernel parameters
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PARAM_H
+#define _ASM_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ             1000            /* Internal kernel timer frequency */
+#define USER_HZ                100             /* .. some user interfaces are in
+                                        * "ticks" */
+#define CLOCKS_PER_SEC (USER_HZ)       /* like times() */
+#endif
+
+#ifndef HZ
+#define HZ             100
+#endif
+
+#define EXEC_PAGESIZE  4096
+
+#ifndef NOGROUP
+#define NOGROUP                (-1)
+#endif
+
+#define MAXHOSTNAMELEN 64      /* max length of hostname */
+#define COMMAND_LINE_SIZE 256
+
+#endif /* _ASM_PARAM_H */
diff --git a/include/asm-mn10300/pci.h b/include/asm-mn10300/pci.h
new file mode 100644 (file)
index 0000000..205192c
--- /dev/null
@@ -0,0 +1,133 @@
+/* MN10300 PCI definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PCI_H
+#define _ASM_PCI_H
+
+#ifdef __KERNEL__
+#include <linux/mm.h>          /* for struct page */
+
+#if 0
+#define __pcbdebug(FMT, ADDR, ...) \
+       printk(KERN_DEBUG "PCIBRIDGE[%08x]: "FMT"\n", \
+              (u32)(ADDR), ##__VA_ARGS__)
+
+#define __pcidebug(FMT, BUS, DEVFN, WHERE,...)         \
+do {                                                   \
+       printk(KERN_DEBUG "PCI[%02x:%02x.%x + %02x]: "FMT"\n",  \
+              (BUS)->number,                                   \
+              PCI_SLOT(DEVFN),                                 \
+              PCI_FUNC(DEVFN),                                 \
+              (u32)(WHERE), ##__VA_ARGS__);                    \
+} while (0)
+
+#else
+#define __pcbdebug(FMT, ADDR, ...)             do {} while (0)
+#define __pcidebug(FMT, BUS, DEVFN, WHERE, ...)        do {} while (0)
+#endif
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+ * already-configured bus numbers - to be used for buggy BIOSes or
+ * architectures with incomplete PCI setup by the loader */
+
+#ifdef CONFIG_PCI
+#define pcibios_assign_all_busses()    1
+extern void unit_pci_init(void);
+#else
+#define pcibios_assign_all_busses()    0
+#endif
+
+extern unsigned long pci_mem_start;
+#define PCIBIOS_MIN_IO         0xBE000004
+#define PCIBIOS_MIN_MEM                0xB8000000
+
+void pcibios_set_master(struct pci_dev *dev);
+void pcibios_penalize_isa_irq(int irq);
+
+/* Dynamic DMA mapping stuff.
+ * i386 has everything mapped statically.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+
+struct pci_dev;
+
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS    (1)
+
+
+/* This is always fine. */
+#define pci_dac_dma_supported(pci_dev, mask)   (0)
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns.
+ */
+#define sg_dma_address(sg)     ((sg)->dma_address)
+#define sg_dma_len(sg)         ((sg)->length)
+
+/* Return the index of the PCI controller for device. */
+static inline int pci_controller_num(struct pci_dev *dev)
+{
+       return 0;
+}
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+                              enum pci_mmap_state mmap_state,
+                              int write_combine);
+
+#endif /* __KERNEL__ */
+
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+/**
+ * pcibios_resource_to_bus - convert resource to PCI bus address
+ * @dev: device which owns this resource
+ * @region: converted bus-centric region (start,end)
+ * @res: resource to convert
+ *
+ * Convert a resource to a PCI device bus address or bus window.
+ */
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+                                   struct pci_bus_region *region,
+                                   struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev,
+                                   struct resource *res,
+                                   struct pci_bus_region *region);
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+       struct resource *root = NULL;
+
+       if (res->flags & IORESOURCE_IO)
+               root = &ioport_resource;
+       if (res->flags & IORESOURCE_MEM)
+               root = &iomem_resource;
+
+       return root;
+}
+
+#define pcibios_scan_all_fns(a, b)     0
+
+#endif /* _ASM_PCI_H */
diff --git a/include/asm-mn10300/percpu.h b/include/asm-mn10300/percpu.h
new file mode 100644 (file)
index 0000000..06a959d
--- /dev/null
@@ -0,0 +1 @@
+#include <asm-generic/percpu.h>
diff --git a/include/asm-mn10300/pgalloc.h b/include/asm-mn10300/pgalloc.h
new file mode 100644 (file)
index 0000000..ec057e1
--- /dev/null
@@ -0,0 +1,56 @@
+/* MN10300 Page and page table/directory allocation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PGALLOC_H
+#define _ASM_PGALLOC_H
+
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <linux/threads.h>
+#include <linux/mm.h>          /* for struct page */
+
+struct mm_struct;
+struct page;
+
+/* attach a page table to a PMD entry */
+#define pmd_populate_kernel(mm, pmd, pte) \
+       set_pmd(pmd, __pmd(__pa(pte) | _PAGE_TABLE))
+
+static inline
+void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *pte)
+{
+       set_pmd(pmd, __pmd((page_to_pfn(pte) << PAGE_SHIFT) | _PAGE_TABLE));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+/*
+ * Allocate and free page tables.
+ */
+
+extern pgd_t *pgd_alloc(struct mm_struct *);
+extern void pgd_free(struct mm_struct *, pgd_t *);
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
+extern struct page *pte_alloc_one(struct mm_struct *, unsigned long);
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+       free_page((unsigned long) pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, struct page *pte)
+{
+       __free_page(pte);
+}
+
+
+#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte))
+
+#endif /* _ASM_PGALLOC_H */
diff --git a/include/asm-mn10300/pgtable.h b/include/asm-mn10300/pgtable.h
new file mode 100644 (file)
index 0000000..375c494
--- /dev/null
@@ -0,0 +1,489 @@
+/* MN10300 Page table manipulators and constants
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ *
+ * The Linux memory management assumes a three-level page table setup. On
+ * the i386, we use that, but "fold" the mid level into the top-level page
+ * table, so that we physically have the same two-level page table as the
+ * i386 mmu expects.
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the i386 page table tree for the purposes of the MN10300 TLB handler
+ * functions.
+ */
+#ifndef _ASM_PGTABLE_H
+#define _ASM_PGTABLE_H
+
+#include <asm/cpu-regs.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <linux/threads.h>
+
+#include <asm/bitops.h>
+
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+extern unsigned long empty_zero_page[1024];
+extern spinlock_t pgd_lock;
+extern struct page *pgd_list;
+
+extern void pmd_ctor(void *, struct kmem_cache *, unsigned long);
+extern void pgtable_cache_init(void);
+extern void paging_init(void);
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The Linux mn10300 paging architecture only implements both the traditional
+ * 2-level page tables
+ */
+#define PGDIR_SHIFT    22
+#define PTRS_PER_PGD   1024
+#define PTRS_PER_PUD   1       /* we don't really have any PUD physically */
+#define PTRS_PER_PMD   1       /* we don't really have any PMD physically */
+#define PTRS_PER_PTE   1024
+
+#define PGD_SIZE       PAGE_SIZE
+#define PMD_SIZE       (1UL << PMD_SHIFT)
+#define PGDIR_SIZE     (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK     (~(PGDIR_SIZE - 1))
+
+#define USER_PTRS_PER_PGD      (TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_ADDRESS     0
+
+#define USER_PGD_PTRS          (PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS                (PTRS_PER_PGD - USER_PGD_PTRS)
+
+#define TWOLEVEL_PGDIR_SHIFT   22
+#define BOOT_USER_PGD_PTRS     (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT)
+#define BOOT_KERNEL_PGD_PTRS   (1024 - BOOT_USER_PGD_PTRS)
+
+#ifndef __ASSEMBLY__
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+#endif
+
+/*
+ * Unfortunately, due to the way the MMU works on the MN10300, the vmalloc VM
+ * area has to be in the lower half of the virtual address range (the upper
+ * half is not translated through the TLB).
+ *
+ * So in this case, the vmalloc area goes at the bottom of the address map
+ * (leaving a hole at the very bottom to catch addressing errors), and
+ * userspace starts immediately above.
+ *
+ * The vmalloc() routines also leaves a hole of 4kB between each vmalloced
+ * area to catch addressing errors.
+ */
+#define VMALLOC_OFFSET (8 * 1024 * 1024)
+#define VMALLOC_START  (0x70000000)
+#define VMALLOC_END    (0x7C000000)
+
+#ifndef __ASSEMBLY__
+extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE];
+#endif
+
+/* IPTEL/DPTEL bit assignments */
+#define _PAGE_BIT_VALID                xPTEL_V_BIT
+#define _PAGE_BIT_ACCESSED     xPTEL_UNUSED1_BIT       /* mustn't be loaded into IPTEL/DPTEL */
+#define _PAGE_BIT_NX           xPTEL_UNUSED2_BIT       /* mustn't be loaded into IPTEL/DPTEL */
+#define _PAGE_BIT_CACHE                xPTEL_C_BIT
+#define _PAGE_BIT_PRESENT      xPTEL_PV_BIT
+#define _PAGE_BIT_DIRTY                xPTEL_D_BIT
+#define _PAGE_BIT_GLOBAL       xPTEL_G_BIT
+
+#define _PAGE_VALID            xPTEL_V
+#define _PAGE_ACCESSED         xPTEL_UNUSED1
+#define _PAGE_NX               xPTEL_UNUSED2           /* no-execute bit */
+#define _PAGE_CACHE            xPTEL_C
+#define _PAGE_PRESENT          xPTEL_PV
+#define _PAGE_DIRTY            xPTEL_D
+#define _PAGE_PROT             xPTEL_PR
+#define _PAGE_PROT_RKNU                xPTEL_PR_ROK
+#define _PAGE_PROT_WKNU                xPTEL_PR_RWK
+#define _PAGE_PROT_RKRU                xPTEL_PR_ROK_ROU
+#define _PAGE_PROT_WKRU                xPTEL_PR_RWK_ROU
+#define _PAGE_PROT_WKWU                xPTEL_PR_RWK_RWU
+#define _PAGE_GLOBAL           xPTEL_G
+#define _PAGE_PSE              xPTEL_PS_4Mb            /* 4MB page */
+
+#define _PAGE_FILE             xPTEL_UNUSED1_BIT       /* set:pagecache unset:swap */
+
+#define __PAGE_PROT_UWAUX      0x040
+#define __PAGE_PROT_USER       0x080
+#define __PAGE_PROT_WRITE      0x100
+
+#define _PAGE_PRESENTV         (_PAGE_PRESENT|_PAGE_VALID)
+#define _PAGE_PROTNONE         0x000   /* If not present */
+
+#ifndef __ASSEMBLY__
+
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+
+#define _PAGE_TABLE    (_PAGE_PRESENTV | _PAGE_PROT_WKNU | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define __PAGE_NONE    (_PAGE_PRESENTV | _PAGE_PROT_RKNU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define __PAGE_SHARED  (_PAGE_PRESENTV | _PAGE_PROT_WKWU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define __PAGE_COPY    (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define __PAGE_READONLY        (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE)
+
+#define PAGE_NONE              __pgprot(__PAGE_NONE     | _PAGE_NX)
+#define PAGE_SHARED_NOEXEC     __pgprot(__PAGE_SHARED   | _PAGE_NX)
+#define PAGE_COPY_NOEXEC       __pgprot(__PAGE_COPY     | _PAGE_NX)
+#define PAGE_READONLY_NOEXEC   __pgprot(__PAGE_READONLY | _PAGE_NX)
+#define PAGE_SHARED_EXEC       __pgprot(__PAGE_SHARED)
+#define PAGE_COPY_EXEC         __pgprot(__PAGE_COPY)
+#define PAGE_READONLY_EXEC     __pgprot(__PAGE_READONLY)
+#define PAGE_COPY              PAGE_COPY_NOEXEC
+#define PAGE_READONLY          PAGE_READONLY_NOEXEC
+#define PAGE_SHARED            PAGE_SHARED_EXEC
+
+#define __PAGE_KERNEL_BASE (_PAGE_PRESENTV | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_GLOBAL)
+
+#define __PAGE_KERNEL          (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_CACHE | _PAGE_NX)
+#define __PAGE_KERNEL_NOCACHE  (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_NX)
+#define __PAGE_KERNEL_EXEC     (__PAGE_KERNEL & ~_PAGE_NX)
+#define __PAGE_KERNEL_RO       (__PAGE_KERNEL_BASE | _PAGE_PROT_RKNU | _PAGE_CACHE | _PAGE_NX)
+#define __PAGE_KERNEL_LARGE    (__PAGE_KERNEL | _PAGE_PSE)
+#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE)
+
+#define PAGE_KERNEL            __pgprot(__PAGE_KERNEL)
+#define PAGE_KERNEL_RO         __pgprot(__PAGE_KERNEL_RO)
+#define PAGE_KERNEL_EXEC       __pgprot(__PAGE_KERNEL_EXEC)
+#define PAGE_KERNEL_NOCACHE    __pgprot(__PAGE_KERNEL_NOCACHE)
+#define PAGE_KERNEL_LARGE      __pgprot(__PAGE_KERNEL_LARGE)
+#define PAGE_KERNEL_LARGE_EXEC __pgprot(__PAGE_KERNEL_LARGE_EXEC)
+
+/*
+ * Whilst the MN10300 can do page protection for execute (given separate data
+ * and insn TLBs), we are not supporting it at the moment. Write permission,
+ * however, always implies read permission (but not execute permission).
+ */
+#define __P000 PAGE_NONE
+#define __P001 PAGE_READONLY_NOEXEC
+#define __P010 PAGE_COPY_NOEXEC
+#define __P011 PAGE_COPY_NOEXEC
+#define __P100 PAGE_READONLY_EXEC
+#define __P101 PAGE_READONLY_EXEC
+#define __P110 PAGE_COPY_EXEC
+#define __P111 PAGE_COPY_EXEC
+
+#define __S000 PAGE_NONE
+#define __S001 PAGE_READONLY_NOEXEC
+#define __S010 PAGE_SHARED_NOEXEC
+#define __S011 PAGE_SHARED_NOEXEC
+#define __S100 PAGE_READONLY_EXEC
+#define __S101 PAGE_READONLY_EXEC
+#define __S110 PAGE_SHARED_EXEC
+#define __S111 PAGE_SHARED_EXEC
+
+/*
+ * Define this to warn about kernel memory accesses that are
+ * done without a 'verify_area(VERIFY_WRITE,..)'
+ */
+#undef TEST_VERIFY_AREA
+
+#define pte_present(x) (pte_val(x) & _PAGE_VALID)
+#define pte_clear(mm, addr, xp)                                \
+do {                                                   \
+       set_pte_at((mm), (addr), (xp), __pte(0));       \
+} while (0)
+
+#define pmd_none(x)    (!pmd_val(x))
+#define pmd_present(x) (!pmd_none(x))
+#define pmd_clear(xp)  do { set_pmd(xp, __pmd(0)); } while (0)
+#define        pmd_bad(x)      0
+
+
+#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT))
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_user(pte_t pte)  { return pte_val(pte) & __PAGE_PROT_USER; }
+static inline int pte_read(pte_t pte)  { return pte_val(pte) & __PAGE_PROT_USER; }
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_write(pte_t pte) { return pte_val(pte) & __PAGE_PROT_WRITE; }
+
+/*
+ * The following only works if pte_present() is not true.
+ */
+static inline int pte_file(pte_t pte)  { return pte_val(pte) & _PAGE_FILE; }
+
+static inline pte_t pte_rdprotect(pte_t pte)
+{
+       pte_val(pte) &= ~(__PAGE_PROT_USER|__PAGE_PROT_UWAUX); return pte;
+}
+static inline pte_t pte_exprotect(pte_t pte)
+{
+       pte_val(pte) |= _PAGE_NX; return pte;
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+       pte_val(pte) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX); return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)     { pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkold(pte_t pte)       { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte)     { pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte)     { pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkexec(pte_t pte)      { pte_val(pte) &= ~_PAGE_NX; return pte; }
+
+static inline pte_t pte_mkread(pte_t pte)
+{
+       pte_val(pte) |= __PAGE_PROT_USER;
+       if (pte_write(pte))
+               pte_val(pte) |= __PAGE_PROT_UWAUX;
+       return pte;
+}
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+       pte_val(pte) |= __PAGE_PROT_WRITE;
+       if (pte_val(pte) & __PAGE_PROT_USER)
+               pte_val(pte) |= __PAGE_PROT_UWAUX;
+       return pte;
+}
+
+#define pte_ERROR(e) \
+       printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \
+              __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+       printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \
+              __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+#define pgd_clear(xp)                          do { } while (0)
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval)                        (*(pteptr) = pteval)
+#define set_pte_at(mm, addr, ptep, pteval)     set_pte((ptep), (pteval))
+#define set_pte_atomic(pteptr, pteval)         set_pte((pteptr), (pteval))
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+
+#define ptep_get_and_clear(mm, addr, ptep) \
+       __pte(xchg(&(ptep)->pte, 0))
+#define pte_same(a, b)         (pte_val(a) == pte_val(b))
+#define pte_page(x)            pfn_to_page(pte_pfn(x))
+#define pte_none(x)            (!pte_val(x))
+#define pte_pfn(x)             ((unsigned long) (pte_val(x) >> PAGE_SHIFT))
+#define __pfn_addr(pfn)                ((pfn) << PAGE_SHIFT)
+#define pfn_pte(pfn, prot)     __pte(__pfn_addr(pfn) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot)     __pmd(__pfn_addr(pfn) | pgprot_val(prot))
+
+/*
+ * All present user pages are user-executable:
+ */
+static inline int pte_exec(pte_t pte)
+{
+       return pte_user(pte);
+}
+
+/*
+ * All present pages are kernel-executable:
+ */
+static inline int pte_exec_kernel(pte_t pte)
+{
+       return 1;
+}
+
+/*
+ * Bits 0 and 1 are taken, split up the 29 bits of offset
+ * into this range:
+ */
+#define PTE_FILE_MAX_BITS      29
+
+#define pte_to_pgoff(pte)      (pte_val(pte) >> 2)
+#define pgoff_to_pte(off)      __pte((off) << 2 | _PAGE_FILE)
+
+/* Encode and de-code a swap entry */
+#define __swp_type(x)                  (((x).val >> 2) & 0x3f)
+#define __swp_offset(x)                        ((x).val >> 8)
+#define __swp_entry(type, offset) \
+       ((swp_entry_t) { ((type) << 2) | ((offset) << 8) })
+#define __pte_to_swp_entry(pte)                ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)          __pte((x).val)
+
+static inline
+int ptep_test_and_clear_dirty(struct vm_area_struct *vma, unsigned long addr,
+                             pte_t *ptep)
+{
+       if (!pte_dirty(*ptep))
+               return 0;
+       return test_and_clear_bit(_PAGE_BIT_DIRTY, &ptep->pte);
+}
+
+static inline
+int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr,
+                             pte_t *ptep)
+{
+       if (!pte_young(*ptep))
+               return 0;
+       return test_and_clear_bit(_PAGE_BIT_ACCESSED, &ptep->pte);
+}
+
+static inline
+void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+       pte_val(*ptep) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX);
+}
+
+static inline void ptep_mkdirty(pte_t *ptep)
+{
+       set_bit(_PAGE_BIT_DIRTY, &ptep->pte);
+}
+
+/*
+ * Macro to mark a page protection value as "uncacheable".  On processors which
+ * do not support it, this is a no-op.
+ */
+#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE)
+
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+#define mk_pte(page, pgprot)   pfn_pte(page_to_pfn(page), (pgprot))
+#define mk_pte_huge(entry) \
+       ((entry).pte |= _PAGE_PRESENT | _PAGE_PSE | _PAGE_VALID)
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+       pte_val(pte) &= _PAGE_CHG_MASK;
+       pte_val(pte) |= pgprot_val(newprot);
+       return pte;
+}
+
+#define page_pte(page) page_pte_prot((page), __pgprot(0))
+
+#define pmd_page_kernel(pmd) \
+       ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
+#define pmd_page(pmd)  pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
+
+#define pmd_large(pmd) \
+       ((pmd_val(pmd) & (_PAGE_PSE | _PAGE_PRESENT)) == \
+        (_PAGE_PSE | _PAGE_PRESENT))
+
+/*
+ * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
+ *
+ * this macro returns the index of the entry in the pgd page which would
+ * control the given virtual address
+ */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+
+/*
+ * pgd_offset() returns a (pgd_t *)
+ * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
+ */
+#define pgd_offset(mm, address)        ((mm)->pgd + pgd_index(address))
+
+/*
+ * a shortcut which implies the use of the kernel's pgd, instead
+ * of a process's
+ */
+#define pgd_offset_k(address)  pgd_offset(&init_mm, address)
+
+/*
+ * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
+ *
+ * this macro returns the index of the entry in the pmd page which would
+ * control the given virtual address
+ */
+#define pmd_index(address) \
+       (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
+
+/*
+ * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * this macro returns the index of the entry in the pte page which would
+ * control the given virtual address
+ */
+#define pte_index(address) \
+       (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+#define pte_offset_kernel(dir, address) \
+       ((pte_t *) pmd_page_kernel(*(dir)) +  pte_index(address))
+
+/*
+ * Make a given kernel text page executable/non-executable.
+ * Returns the previous executability setting of that page (which
+ * is used to restore the previous state). Used by the SMP bootup code.
+ * NOTE: this is an __init function for security reasons.
+ */
+static inline int set_kernel_exec(unsigned long vaddr, int enable)
+{
+       return 0;
+}
+
+#define pte_offset_map(dir, address) \
+       ((pte_t *) page_address(pmd_page(*(dir))) + pte_index(address))
+#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address)
+#define pte_unmap(pte)         do {} while (0)
+#define pte_unmap_nested(pte)  do {} while (0)
+
+/*
+ * The MN10300 has external MMU info in the form of a TLB: this is adapted from
+ * the kernel page tables containing the necessary information by tlb-mn10300.S
+ */
+extern void update_mmu_cache(struct vm_area_struct *vma,
+                            unsigned long address, pte_t pte);
+
+#endif /* !__ASSEMBLY__ */
+
+#define kern_addr_valid(addr)  (1)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+       remap_pfn_range((vma), (vaddr), (pfn), (size), (prot))
+
+#define MK_IOSPACE_PFN(space, pfn)     (pfn)
+#define GET_IOSPACE(pfn)               0
+#define GET_PFN(pfn)                   (pfn)
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTEP_MKDIRTY
+#define __HAVE_ARCH_PTE_SAME
+#include <asm-generic/pgtable.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_PGTABLE_H */
diff --git a/include/asm-mn10300/pio-regs.h b/include/asm-mn10300/pio-regs.h
new file mode 100644 (file)
index 0000000..96bc818
--- /dev/null
@@ -0,0 +1,233 @@
+/* MN10300 On-board I/O port module registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PIO_REGS_H
+#define _ASM_PIO_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+/* I/O port 0 */
+#define        P0MD                    __SYSREG(0xdb000000, u16)       /* mode reg */
+#define P0MD_0                 0x0003  /* mask */
+#define P0MD_0_IN              0x0000  /* input mode */
+#define P0MD_0_OUT             0x0001  /* output mode */
+#define P0MD_0_TM0IO           0x0002  /* timer 0 I/O mode */
+#define P0MD_0_EYECLK          0x0003  /* test signal output (clock) */
+#define P0MD_1                 0x000c
+#define P0MD_1_IN              0x0000
+#define P0MD_1_OUT             0x0004
+#define P0MD_1_TM1IO           0x0008  /* timer 1 I/O mode */
+#define P0MD_1_EYED            0x000c  /* test signal output (data) */
+#define P0MD_2                 0x0030
+#define P0MD_2_IN              0x0000
+#define P0MD_2_OUT             0x0010
+#define P0MD_2_TM2IO           0x0020  /* timer 2 I/O mode */
+#define P0MD_3                 0x00c0
+#define P0MD_3_IN              0x0000
+#define P0MD_3_OUT             0x0040
+#define P0MD_3_TM3IO           0x0080  /* timer 3 I/O mode */
+#define P0MD_4                 0x0300
+#define P0MD_4_IN              0x0000
+#define P0MD_4_OUT             0x0100
+#define P0MD_4_TM4IO           0x0200  /* timer 4 I/O mode */
+#define P0MD_4_XCTS            0x0300  /* XCTS input for serial port 2 */
+#define P0MD_5                 0x0c00
+#define P0MD_5_IN              0x0000
+#define P0MD_5_OUT             0x0400
+#define P0MD_5_TM5IO           0x0800  /* timer 5 I/O mode */
+#define P0MD_6                 0x3000
+#define P0MD_6_IN              0x0000
+#define P0MD_6_OUT             0x1000
+#define P0MD_6_TM6IOA          0x2000  /* timer 6 I/O mode A */
+#define P0MD_7                 0xc000
+#define P0MD_7_IN              0x0000
+#define P0MD_7_OUT             0x4000
+#define P0MD_7_TM6IOB          0x8000  /* timer 6 I/O mode B */
+
+#define        P0IN                    __SYSREG(0xdb000004, u8)        /* in reg */
+#define        P0OUT                   __SYSREG(0xdb000008, u8)        /* out reg */
+
+#define        P0TMIO                  __SYSREG(0xdb00000c, u8)        /* TM pin I/O control reg */
+#define P0TMIO_TM0_IN          0x00
+#define P0TMIO_TM0_OUT         0x01
+#define P0TMIO_TM1_IN          0x00
+#define P0TMIO_TM1_OUT         0x02
+#define P0TMIO_TM2_IN          0x00
+#define P0TMIO_TM2_OUT         0x04
+#define P0TMIO_TM3_IN          0x00
+#define P0TMIO_TM3_OUT         0x08
+#define P0TMIO_TM4_IN          0x00
+#define P0TMIO_TM4_OUT         0x10
+#define P0TMIO_TM5_IN          0x00
+#define P0TMIO_TM5_OUT         0x20
+#define P0TMIO_TM6A_IN         0x00
+#define P0TMIO_TM6A_OUT                0x40
+#define P0TMIO_TM6B_IN         0x00
+#define P0TMIO_TM6B_OUT                0x80
+
+/* I/O port 1 */
+#define        P1MD                    __SYSREG(0xdb000100, u16)       /* mode reg */
+#define P1MD_0                 0x0003  /* mask */
+#define P1MD_0_IN              0x0000  /* input mode */
+#define P1MD_0_OUT             0x0001  /* output mode */
+#define P1MD_0_TM7IO           0x0002  /* timer 7 I/O mode */
+#define P1MD_0_ADTRG           0x0003  /* A/D converter trigger mode */
+#define P1MD_1                 0x000c
+#define P1MD_1_IN              0x0000
+#define P1MD_1_OUT             0x0004
+#define P1MD_1_TM8IO           0x0008  /* timer 8 I/O mode */
+#define P1MD_1_XDMR0           0x000c  /* DMA request input 0 mode */
+#define P1MD_2                 0x0030
+#define P1MD_2_IN              0x0000
+#define P1MD_2_OUT             0x0010
+#define P1MD_2_TM9IO           0x0020  /* timer 9 I/O mode */
+#define P1MD_2_XDMR1           0x0030  /* DMA request input 1 mode */
+#define P1MD_3                 0x00c0
+#define P1MD_3_IN              0x0000
+#define P1MD_3_OUT             0x0040
+#define P1MD_3_TM10IO          0x0080  /* timer 10 I/O mode */
+#define P1MD_3_FRQS0           0x00c0  /* CPU clock multiplier setting input 0 mode */
+#define P1MD_4                 0x0300
+#define P1MD_4_IN              0x0000
+#define P1MD_4_OUT             0x0100
+#define P1MD_4_TM11IO          0x0200  /* timer 11 I/O mode */
+#define P1MD_4_FRQS1           0x0300  /* CPU clock multiplier setting input 1 mode */
+
+#define        P1IN                    __SYSREG(0xdb000104, u8)        /* in reg */
+#define        P1OUT                   __SYSREG(0xdb000108, u8)        /* out reg */
+#define        P1TMIO                  __SYSREG(0xdb00010c, u8)        /* TM pin I/O control reg */
+#define P1TMIO_TM11_IN         0x00
+#define P1TMIO_TM11_OUT                0x01
+#define P1TMIO_TM10_IN         0x00
+#define P1TMIO_TM10_OUT                0x02
+#define P1TMIO_TM9_IN          0x00
+#define P1TMIO_TM9_OUT         0x04
+#define P1TMIO_TM8_IN          0x00
+#define P1TMIO_TM8_OUT         0x08
+#define P1TMIO_TM7_IN          0x00
+#define P1TMIO_TM7_OUT         0x10
+
+/* I/O port 2 */
+#define        P2MD                    __SYSREG(0xdb000200, u16)       /* mode reg */
+#define P2MD_0                 0x0003  /* mask */
+#define P2MD_0_IN              0x0000  /* input mode */
+#define P2MD_0_OUT             0x0001  /* output mode */
+#define P2MD_0_BOOTBW          0x0003  /* boot bus width selector mode */
+#define P2MD_1                 0x000c
+#define P2MD_1_IN              0x0000
+#define P2MD_1_OUT             0x0004
+#define P2MD_1_BOOTSEL         0x000c  /* boot device selector mode */
+#define P2MD_2                 0x0030
+#define P2MD_2_IN              0x0000
+#define P2MD_2_OUT             0x0010
+#define P2MD_3                 0x00c0
+#define P2MD_3_IN              0x0000
+#define P2MD_3_OUT             0x0040
+#define P2MD_3_CKIO            0x00c0  /* mode */
+#define P2MD_4                 0x0300
+#define P2MD_4_IN              0x0000
+#define P2MD_4_OUT             0x0100
+#define P2MD_4_CMOD            0x0300  /* mode */
+
+#define        P2IN                    __SYSREG(0xdb000204, u8)        /* in reg */
+#define        P2OUT                   __SYSREG(0xdb000208, u8)        /* out reg */
+#define        P2TMIO                  __SYSREG(0xdb00020c, u8)        /* TM pin I/O control reg */
+
+/* I/O port 3 */
+#define        P3MD                    __SYSREG(0xdb000300, u16)       /* mode reg */
+#define P3MD_0                 0x0003  /* mask */
+#define P3MD_0_IN              0x0000  /* input mode */
+#define P3MD_0_OUT             0x0001  /* output mode */
+#define P3MD_0_AFRXD           0x0002  /* AFR interface mode */
+#define P3MD_1                 0x000c
+#define P3MD_1_IN              0x0000
+#define P3MD_1_OUT             0x0004
+#define P3MD_1_AFTXD           0x0008  /* AFR interface mode */
+#define P3MD_2                 0x0030
+#define P3MD_2_IN              0x0000
+#define P3MD_2_OUT             0x0010
+#define P3MD_2_AFSCLK          0x0020  /* AFR interface mode */
+#define P3MD_3                 0x00c0
+#define P3MD_3_IN              0x0000
+#define P3MD_3_OUT             0x0040
+#define P3MD_3_AFFS            0x0080  /* AFR interface mode */
+#define P3MD_4                 0x0300
+#define P3MD_4_IN              0x0000
+#define P3MD_4_OUT             0x0100
+#define P3MD_4_AFEHC           0x0200  /* AFR interface mode */
+
+#define        P3IN                    __SYSREG(0xdb000304, u8)        /* in reg */
+#define        P3OUT                   __SYSREG(0xdb000308, u8)        /* out reg */
+
+/* I/O port 4 */
+#define        P4MD                    __SYSREG(0xdb000400, u16)       /* mode reg */
+#define P4MD_0                 0x0003  /* mask */
+#define P4MD_0_IN              0x0000  /* input mode */
+#define P4MD_0_OUT             0x0001  /* output mode */
+#define P4MD_0_SCL0            0x0002  /* I2C/serial mode */
+#define P4MD_1                 0x000c
+#define P4MD_1_IN              0x0000
+#define P4MD_1_OUT             0x0004
+#define P4MD_1_SDA0            0x0008
+#define P4MD_2                 0x0030
+#define P4MD_2_IN              0x0000
+#define P4MD_2_OUT             0x0010
+#define P4MD_2_SCL1            0x0020
+#define P4MD_3                 0x00c0
+#define P4MD_3_IN              0x0000
+#define P4MD_3_OUT             0x0040
+#define P4MD_3_SDA1            0x0080
+#define P4MD_4                 0x0300
+#define P4MD_4_IN              0x0000
+#define P4MD_4_OUT             0x0100
+#define P4MD_4_SBO0            0x0200
+#define P4MD_5                 0x0c00
+#define P4MD_5_IN              0x0000
+#define P4MD_5_OUT             0x0400
+#define P4MD_5_SBO1            0x0800
+#define P4MD_6                 0x3000
+#define P4MD_6_IN              0x0000
+#define P4MD_6_OUT             0x1000
+#define P4MD_6_SBT0            0x2000
+#define P4MD_7                 0xc000
+#define P4MD_7_IN              0x0000
+#define P4MD_7_OUT             0x4000
+#define P4MD_7_SBT1            0x8000
+
+#define        P4IN                    __SYSREG(0xdb000404, u8)        /* in reg */
+#define        P4OUT                   __SYSREG(0xdb000408, u8)        /* out reg */
+
+/* I/O port 5 */
+#define        P5MD                    __SYSREG(0xdb000500, u16)       /* mode reg */
+#define P5MD_0                 0x0003  /* mask */
+#define P5MD_0_IN              0x0000  /* input mode */
+#define P5MD_0_OUT             0x0001  /* output mode */
+#define P5MD_0_IRTXD           0x0002  /* IrDA mode */
+#define P5MD_0_SOUT            0x0004  /* serial mode */
+#define P5MD_1                 0x000c
+#define P5MD_1_IN              0x0000
+#define P5MD_1_OUT             0x0004
+#define P5MD_1_IRRXDS          0x0008  /* IrDA mode */
+#define P5MD_1_SIN             0x000c  /* serial mode */
+#define P5MD_2                 0x0030
+#define P5MD_2_IN              0x0000
+#define P5MD_2_OUT             0x0010
+#define P5MD_2_IRRXDF          0x0020  /* IrDA mode */
+
+#define        P5IN                    __SYSREG(0xdb000504, u8)        /* in reg */
+#define        P5OUT                   __SYSREG(0xdb000508, u8)        /* out reg */
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PIO_REGS_H */
diff --git a/include/asm-mn10300/poll.h b/include/asm-mn10300/poll.h
new file mode 100644 (file)
index 0000000..c98509d
--- /dev/null
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/include/asm-mn10300/posix_types.h b/include/asm-mn10300/posix_types.h
new file mode 100644 (file)
index 0000000..077567c
--- /dev/null
@@ -0,0 +1,132 @@
+/* MN10300 POSIX types
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_POSIX_TYPES_H
+#define _ASM_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long  __kernel_ino_t;
+typedef unsigned short __kernel_mode_t;
+typedef unsigned short __kernel_nlink_t;
+typedef long           __kernel_off_t;
+typedef int            __kernel_pid_t;
+typedef unsigned short __kernel_ipc_pid_t;
+typedef unsigned short __kernel_uid_t;
+typedef unsigned short __kernel_gid_t;
+typedef unsigned long  __kernel_size_t;
+typedef long           __kernel_ssize_t;
+typedef int            __kernel_ptrdiff_t;
+typedef long           __kernel_time_t;
+typedef long           __kernel_suseconds_t;
+typedef long           __kernel_clock_t;
+typedef int            __kernel_timer_t;
+typedef int            __kernel_clockid_t;
+typedef int            __kernel_daddr_t;
+typedef char *         __kernel_caddr_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int   __kernel_uid32_t;
+typedef unsigned int   __kernel_gid32_t;
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+typedef unsigned short __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long      __kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+       int     val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+       int     __val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef __FD_SET
+static inline void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+       unsigned long __tmp = __fd / __NFDBITS;
+       unsigned long __rem = __fd % __NFDBITS;
+       __fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef __FD_CLR
+static inline void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+       unsigned long __tmp = __fd / __NFDBITS;
+       unsigned long __rem = __fd % __NFDBITS;
+       __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+
+#undef __FD_ISSET
+static inline int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+       unsigned long __tmp = __fd / __NFDBITS;
+       unsigned long __rem = __fd % __NFDBITS;
+       return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static inline void __FD_ZERO(__kernel_fd_set *__p)
+{
+       unsigned long *__tmp = __p->fds_bits;
+       int __i;
+
+       if (__builtin_constant_p(__FDSET_LONGS)) {
+               switch (__FDSET_LONGS) {
+               case 16:
+                       __tmp[ 0] = 0; __tmp[ 1] = 0;
+                       __tmp[ 2] = 0; __tmp[ 3] = 0;
+                       __tmp[ 4] = 0; __tmp[ 5] = 0;
+                       __tmp[ 6] = 0; __tmp[ 7] = 0;
+                       __tmp[ 8] = 0; __tmp[ 9] = 0;
+                       __tmp[10] = 0; __tmp[11] = 0;
+                       __tmp[12] = 0; __tmp[13] = 0;
+                       __tmp[14] = 0; __tmp[15] = 0;
+                       return;
+
+               case 8:
+                       __tmp[ 0] = 0; __tmp[ 1] = 0;
+                       __tmp[ 2] = 0; __tmp[ 3] = 0;
+                       __tmp[ 4] = 0; __tmp[ 5] = 0;
+                       __tmp[ 6] = 0; __tmp[ 7] = 0;
+                       return;
+
+               case 4:
+                       __tmp[ 0] = 0; __tmp[ 1] = 0;
+                       __tmp[ 2] = 0; __tmp[ 3] = 0;
+                       return;
+               }
+       }
+       __i = __FDSET_LONGS;
+       while (__i) {
+               __i--;
+               *__tmp = 0;
+               __tmp++;
+       }
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* _ASM_POSIX_TYPES_H */
diff --git a/include/asm-mn10300/proc-mn103e010/cache.h b/include/asm-mn10300/proc-mn103e010/cache.h
new file mode 100644 (file)
index 0000000..bdc1f9a
--- /dev/null
@@ -0,0 +1,33 @@
+/* MN103E010 Cache specification
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PROC_CACHE_H
+#define _ASM_PROC_CACHE_H
+
+/* L1 cache */
+
+#define L1_CACHE_NWAYS         4       /* number of ways in caches */
+#define L1_CACHE_NENTRIES      256     /* number of entries in each way */
+#define L1_CACHE_BYTES         16      /* bytes per entry */
+#define L1_CACHE_SHIFT         4       /* shift for bytes per entry */
+#define L1_CACHE_WAYDISP       0x1000  /* displacement of one way from the next */
+
+#define L1_CACHE_TAG_VALID     0x00000001      /* cache tag valid bit */
+#define L1_CACHE_TAG_DIRTY     0x00000008      /* data cache tag dirty bit */
+#define L1_CACHE_TAG_ENTRY     0x00000ff0      /* cache tag entry address mask */
+#define L1_CACHE_TAG_ADDRESS   0xfffff000      /* cache tag line address mask */
+
+/*
+ * specification of the interval between interrupt checking intervals whilst
+ * managing the cache with the interrupts disabled
+ */
+#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL    4
+
+#endif /* _ASM_PROC_CACHE_H */
diff --git a/include/asm-mn10300/proc-mn103e010/clock.h b/include/asm-mn10300/proc-mn103e010/clock.h
new file mode 100644 (file)
index 0000000..caf9983
--- /dev/null
@@ -0,0 +1,18 @@
+/* MN103E010-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PROC_CLOCK_H
+#define _ASM_PROC_CLOCK_H
+
+#include <asm/unit/clock.h>
+
+#define MN10300_WDCLK          MN10300_IOCLK
+
+#endif /* _ASM_PROC_CLOCK_H */
diff --git a/include/asm-mn10300/proc-mn103e010/irq.h b/include/asm-mn10300/proc-mn103e010/irq.h
new file mode 100644 (file)
index 0000000..aa6ee8f
--- /dev/null
@@ -0,0 +1,34 @@
+/* MN103E010 On-board interrupt controller numbers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROC_IRQ_H
+#define _ASM_PROC_IRQ_H
+
+#ifdef __KERNEL__
+
+#define GxICR_NUM_IRQS         42
+
+#define GxICR_NUM_XIRQS                8
+
+#define XIRQ0          34
+#define XIRQ1          35
+#define XIRQ2          36
+#define XIRQ3          37
+#define XIRQ4          38
+#define XIRQ5          39
+#define XIRQ6          40
+#define XIRQ7          41
+
+#define XIRQ2IRQ(num)  (XIRQ0 + num)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PROC_IRQ_H */
diff --git a/include/asm-mn10300/proc-mn103e010/proc.h b/include/asm-mn10300/proc-mn103e010/proc.h
new file mode 100644 (file)
index 0000000..22a2b93
--- /dev/null
@@ -0,0 +1,18 @@
+/* MN103E010 Processor description
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROC_PROC_H
+#define _ASM_PROC_PROC_H
+
+#define PROCESSOR_VENDOR_NAME  "Matsushita"
+#define PROCESSOR_MODEL_NAME   "mn103e010"
+
+#endif /* _ASM_PROC_PROC_H */
diff --git a/include/asm-mn10300/processor.h b/include/asm-mn10300/processor.h
new file mode 100644 (file)
index 0000000..f1b081f
--- /dev/null
@@ -0,0 +1,186 @@
+/* MN10300 Processor specifics
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROCESSOR_H
+#define _ASM_PROCESSOR_H
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/cpu-regs.h>
+#include <linux/threads.h>
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr()                    \
+({                                             \
+       void *__pc;                             \
+       asm("mov pc,%0" : "=a"(__pc));          \
+       __pc;                                   \
+})
+
+extern void show_registers(struct pt_regs *regs);
+
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ *  Members of this structure are referenced in head.S, so think twice
+ *  before touching them. [mj]
+ */
+
+struct mn10300_cpuinfo {
+       int             type;
+       unsigned long   loops_per_sec;
+       char            hard_math;
+       unsigned long   *pgd_quick;
+       unsigned long   *pte_quick;
+       unsigned long   pgtable_cache_sz;
+};
+
+extern struct mn10300_cpuinfo boot_cpu_data;
+
+#define cpu_data &boot_cpu_data
+#define current_cpu_data boot_cpu_data
+
+extern void identify_cpu(struct mn10300_cpuinfo *);
+extern void print_cpu_info(struct mn10300_cpuinfo *);
+extern void dodgy_tsc(void);
+#define cpu_relax() do {} while (0)
+
+/*
+ * User space process size: 1.75GB (default).
+ */
+#define TASK_SIZE              0x70000000
+
+/*
+ * Where to put the userspace stack by default
+ */
+#define STACK_TOP              0x70000000
+#define STACK_TOP_MAX          STACK_TOP
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE     0x30000000
+
+typedef struct {
+       unsigned long   seg;
+} mm_segment_t;
+
+struct fpu_state_struct {
+       unsigned long   fs[32];         /* fpu registers */
+       unsigned long   fpcr;           /* fpu control register */
+};
+
+struct thread_struct {
+       struct pt_regs          *uregs;         /* userspace register frame */
+       unsigned long           pc;             /* kernel PC */
+       unsigned long           sp;             /* kernel SP */
+       unsigned long           a3;             /* kernel FP */
+       unsigned long           wchan;
+       unsigned long           usp;
+       struct pt_regs          *__frame;
+       unsigned long           fpu_flags;
+#define THREAD_USING_FPU       0x00000001      /* T if this task is using the FPU */
+       struct fpu_state_struct fpu_state;
+};
+
+#define INIT_THREAD                            \
+{                                              \
+       .uregs          = init_uregs,           \
+       .pc             = 0,                    \
+       .sp             = 0,                    \
+       .a3             = 0,                    \
+       .wchan          = 0,                    \
+       .__frame        = NULL,                 \
+}
+
+#define INIT_MMAP \
+{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, \
+  NULL, NULL }
+
+/*
+ * do necessary setup to start up a newly executed thread
+ * - need to discard the frame stacked by the kernel thread invoking the execve
+ *   syscall (see RESTORE_ALL macro)
+ */
+#define start_thread(regs, new_pc, new_sp) do {                \
+       set_fs(USER_DS);                                \
+       __frame = current->thread.uregs;                \
+       __frame->epsw = EPSW_nSL | EPSW_IE | EPSW_IM;   \
+       __frame->pc = new_pc;                           \
+       __frame->sp = new_sp;                           \
+} while (0)
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+extern void prepare_to_copy(struct task_struct *tsk);
+
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define task_pt_regs(task)                                             \
+({                                                                     \
+       struct pt_regs *__regs__;                                       \
+       __regs__ = (struct pt_regs *) (KSTK_TOP(task_stack_page(task)) - 8); \
+       __regs__ - 1;                                                   \
+})
+
+#define KSTK_EIP(task) (task_pt_regs(task)->pc)
+#define KSTK_ESP(task) (task_pt_regs(task)->sp)
+
+#define KSTK_TOP(info)                         \
+({                                             \
+       (unsigned long)(info) + THREAD_SIZE;    \
+})
+
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+
+static inline void prefetch(const void *x)
+{
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+#ifdef CONFIG_MN10300_PROC_MN103E010
+       asm volatile ("nop; nop; dcpf (%0)" : : "r"(x));
+#else
+       asm volatile ("dcpf (%0)" : : "r"(x));
+#endif
+#endif
+}
+
+static inline void prefetchw(const void *x)
+{
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+#ifdef CONFIG_MN10300_PROC_MN103E010
+       asm volatile ("nop; nop; dcpf (%0)" : : "r"(x));
+#else
+       asm volatile ("dcpf (%0)" : : "r"(x));
+#endif
+#endif
+}
+
+#endif /* _ASM_PROCESSOR_H */
diff --git a/include/asm-mn10300/ptrace.h b/include/asm-mn10300/ptrace.h
new file mode 100644 (file)
index 0000000..b368468
--- /dev/null
@@ -0,0 +1,99 @@
+/* MN10300 Exception frame layout and ptrace constants
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PTRACE_H
+#define _ASM_PTRACE_H
+
+#define PT_A3          0
+#define PT_A2          1
+#define PT_D3          2
+#define        PT_D2           3
+#define PT_MCVF                4
+#define        PT_MCRL         5
+#define PT_MCRH                6
+#define        PT_MDRQ         7
+#define        PT_E1           8
+#define        PT_E0           9
+#define        PT_E7           10
+#define        PT_E6           11
+#define        PT_E5           12
+#define        PT_E4           13
+#define        PT_E3           14
+#define        PT_E2           15
+#define        PT_SP           16
+#define        PT_LAR          17
+#define        PT_LIR          18
+#define        PT_MDR          19
+#define        PT_A1           20
+#define        PT_A0           21
+#define        PT_D1           22
+#define        PT_D0           23
+#define PT_ORIG_D0     24
+#define        PT_EPSW         25
+#define        PT_PC           26
+#define NR_PTREGS      27
+
+#ifndef __ASSEMBLY__
+/*
+ * This defines the way registers are stored in the event of an exception
+ * - the strange order is due to the MOVM instruction
+ */
+struct pt_regs {
+       unsigned long           a3;             /* syscall arg 3 */
+       unsigned long           a2;             /* syscall arg 4 */
+       unsigned long           d3;             /* syscall arg 5 */
+       unsigned long           d2;             /* syscall arg 6 */
+       unsigned long           mcvf;
+       unsigned long           mcrl;
+       unsigned long           mcrh;
+       unsigned long           mdrq;
+       unsigned long           e1;
+       unsigned long           e0;
+       unsigned long           e7;
+       unsigned long           e6;
+       unsigned long           e5;
+       unsigned long           e4;
+       unsigned long           e3;
+       unsigned long           e2;
+       unsigned long           sp;
+       unsigned long           lar;
+       unsigned long           lir;
+       unsigned long           mdr;
+       unsigned long           a1;
+       unsigned long           a0;             /* syscall arg 1 */
+       unsigned long           d1;             /* syscall arg 2 */
+       unsigned long           d0;             /* syscall ret */
+       struct pt_regs          *next;          /* next frame pointer */
+       unsigned long           orig_d0;        /* syscall number */
+       unsigned long           epsw;
+       unsigned long           pc;
+};
+#endif
+
+extern struct pt_regs *__frame; /* current frame pointer */
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+
+/* options set using PTRACE_SETOPTIONS */
+#define PTRACE_O_TRACESYSGOOD     0x00000001
+
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+#define user_mode(regs)                        (((regs)->epsw & EPSW_nSL) == EPSW_nSL)
+#define instruction_pointer(regs)      ((regs)->pc)
+extern void show_regs(struct pt_regs *);
+#endif
+
+#define profile_pc(regs) ((regs)->pc)
+
+#endif /* _ASM_PTRACE_H */
diff --git a/include/asm-mn10300/reset-regs.h b/include/asm-mn10300/reset-regs.h
new file mode 100644 (file)
index 0000000..174523d
--- /dev/null
@@ -0,0 +1,64 @@
+/* MN10300 Reset controller and watchdog timer definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_RESET_REGS_H
+#define _ASM_RESET_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_MN10300_WD_TIMER
+#define ARCH_HAS_NMI_WATCHDOG          /* See include/linux/nmi.h */
+#endif
+
+/*
+ * watchdog timer registers
+ */
+#define WDBC                   __SYSREGC(0xc0001000, u8) /* watchdog binary counter reg */
+
+#define WDCTR                  __SYSREG(0xc0001002, u8)  /* watchdog timer control reg */
+#define WDCTR_WDCK             0x07    /* clock source selection */
+#define WDCTR_WDCK_256th       0x00    /* - OSCI/256 */
+#define WDCTR_WDCK_1024th      0x01    /* - OSCI/1024 */
+#define WDCTR_WDCK_2048th      0x02    /* - OSCI/2048 */
+#define WDCTR_WDCK_16384th     0x03    /* - OSCI/16384 */
+#define WDCTR_WDCK_65536th     0x04    /* - OSCI/65536 */
+#define WDCTR_WDRST            0x40    /* binary counter reset */
+#define WDCTR_WDCNE            0x80    /* watchdog timer enable */
+
+#define RSTCTR                 __SYSREG(0xc0001004, u8) /* reset control reg */
+#define RSTCTR_CHIPRST         0x01    /* chip reset */
+#define RSTCTR_DBFRST          0x02    /* double fault reset flag */
+#define RSTCTR_WDTRST          0x04    /* watchdog timer reset flag */
+#define RSTCTR_WDREN           0x08    /* watchdog timer reset enable */
+
+#ifndef __ASSEMBLY__
+
+static inline void mn10300_proc_hard_reset(void)
+{
+       RSTCTR &= ~RSTCTR_CHIPRST;
+       RSTCTR |= RSTCTR_CHIPRST;
+}
+
+extern unsigned int watchdog_alert_counter;
+
+extern void watchdog_go(void);
+extern asmlinkage void watchdog_handler(void);
+extern asmlinkage
+void watchdog_interrupt(struct pt_regs *, enum exception_code);
+
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_RESET_REGS_H */
diff --git a/include/asm-mn10300/resource.h b/include/asm-mn10300/resource.h
new file mode 100644 (file)
index 0000000..04bc4db
--- /dev/null
@@ -0,0 +1 @@
+#include <asm-generic/resource.h>
diff --git a/include/asm-mn10300/rtc-regs.h b/include/asm-mn10300/rtc-regs.h
new file mode 100644 (file)
index 0000000..c42deef
--- /dev/null
@@ -0,0 +1,86 @@
+/* MN10300 on-chip Real-Time Clock registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_RTC_REGS_H
+#define _ASM_RTC_REGS_H
+
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+#define RTSCR                  __SYSREG(0xd8600000, u8) /* RTC seconds count reg */
+#define RTSAR                  __SYSREG(0xd8600001, u8) /* RTC seconds alarm reg */
+#define RTMCR                  __SYSREG(0xd8600002, u8) /* RTC minutes count reg */
+#define RTMAR                  __SYSREG(0xd8600003, u8) /* RTC minutes alarm reg */
+#define RTHCR                  __SYSREG(0xd8600004, u8) /* RTC hours count reg */
+#define RTHAR                  __SYSREG(0xd8600005, u8) /* RTC hours alarm reg */
+#define RTDWCR                 __SYSREG(0xd8600006, u8) /* RTC day of the week count reg */
+#define RTDMCR                 __SYSREG(0xd8600007, u8) /* RTC days count reg */
+#define RTMTCR                 __SYSREG(0xd8600008, u8) /* RTC months count reg */
+#define RTYCR                  __SYSREG(0xd8600009, u8) /* RTC years count reg */
+
+#define RTCRA                  __SYSREG(0xd860000a, u8)/* RTC control reg A */
+#define RTCRA_RS               0x0f    /* periodic timer interrupt cycle setting */
+#define RTCRA_RS_NONE          0x00    /* - off */
+#define RTCRA_RS_3_90625ms     0x01    /* - 3.90625ms  (1/256s) */
+#define RTCRA_RS_7_8125ms      0x02    /* - 7.8125ms   (1/128s) */
+#define RTCRA_RS_122_070us     0x03    /* - 122.070us  (1/8192s) */
+#define RTCRA_RS_244_141us     0x04    /* - 244.141us  (1/4096s) */
+#define RTCRA_RS_488_281us     0x05    /* - 488.281us  (1/2048s) */
+#define RTCRA_RS_976_5625us    0x06    /* - 976.5625us (1/1024s) */
+#define RTCRA_RS_1_953125ms    0x07    /* - 1.953125ms (1/512s) */
+#define RTCRA_RS_3_90624ms     0x08    /* - 3.90624ms  (1/256s) */
+#define RTCRA_RS_7_8125ms_b    0x09    /* - 7.8125ms   (1/128s) */
+#define RTCRA_RS_15_625ms      0x0a    /* - 15.625ms   (1/64s) */
+#define RTCRA_RS_31_25ms       0x0b    /* - 31.25ms    (1/32s) */
+#define RTCRA_RS_62_5ms                0x0c    /* - 62.5ms     (1/16s) */
+#define RTCRA_RS_125ms         0x0d    /* - 125ms      (1/8s) */
+#define RTCRA_RS_250ms         0x0e    /* - 250ms      (1/4s) */
+#define RTCRA_RS_500ms         0x0f    /* - 500ms      (1/2s) */
+#define RTCRA_DVR              0x40    /* divider reset */
+#define RTCRA_UIP              0x80    /* clock update flag */
+
+#define RTCRB                  __SYSREG(0xd860000b, u8) /* RTC control reg B */
+#define RTCRB_DSE              0x01    /* daylight savings time enable */
+#define RTCRB_TM               0x02    /* time format */
+#define RTCRB_TM_12HR          0x00    /* - 12 hour format */
+#define RTCRB_TM_24HR          0x02    /* - 24 hour format */
+#define RTCRB_DM               0x04    /* numeric value format */
+#define RTCRB_DM_BCD           0x00    /* - BCD */
+#define RTCRB_DM_BINARY                0x04    /* - binary */
+#define RTCRB_UIE              0x10    /* update interrupt disable */
+#define RTCRB_AIE              0x20    /* alarm interrupt disable */
+#define RTCRB_PIE              0x40    /* periodic interrupt disable */
+#define RTCRB_SET              0x80    /* clock update enable */
+
+#define RTSRC                  __SYSREG(0xd860000c, u8) /* RTC status reg C */
+#define RTSRC_UF               0x10    /* update end interrupt flag */
+#define RTSRC_AF               0x20    /* alarm interrupt flag */
+#define RTSRC_PF               0x40    /* periodic interrupt flag */
+#define RTSRC_IRQF             0x80    /* interrupt flag */
+
+#define RTIRQ                  32
+#define RTICR                  GxICR(RTIRQ)
+
+/*
+ * MC146818 RTC compatibility defs for the MN10300 on-chip RTC
+ */
+#define RTC_PORT(x)            0xd8600000
+#define RTC_ALWAYS_BCD         1       /* RTC operates in binary mode */
+
+#define CMOS_READ(addr)                __SYSREG(0xd8600000 + (addr), u8)
+#define CMOS_WRITE(val, addr)  \
+       do { __SYSREG(0xd8600000 + (addr), u8) = val; } while (0)
+
+#define RTC_IRQ                        RTIRQ
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_RTC_REGS_H */
diff --git a/include/asm-mn10300/rtc.h b/include/asm-mn10300/rtc.h
new file mode 100644 (file)
index 0000000..c295194
--- /dev/null
@@ -0,0 +1,41 @@
+/* MN10300 Real time clock definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_RTC_H
+#define _ASM_RTC_H
+
+#ifdef CONFIG_MN10300_RTC
+
+#include <linux/init.h>
+
+extern void check_rtc_time(void);
+extern void __init calibrate_clock(void);
+extern unsigned long __init get_initial_rtc_time(void);
+
+#else /* !CONFIG_MN10300_RTC */
+
+static inline void check_rtc_time(void)
+{
+}
+
+static inline void calibrate_clock(void)
+{
+}
+
+static inline unsigned long get_initial_rtc_time(void)
+{
+       return 0;
+}
+
+#endif /* !CONFIG_MN10300_RTC */
+
+#include <asm-generic/rtc.h>
+
+#endif /* _ASM_RTC_H */
diff --git a/include/asm-mn10300/scatterlist.h b/include/asm-mn10300/scatterlist.h
new file mode 100644 (file)
index 0000000..e29d91d
--- /dev/null
@@ -0,0 +1,46 @@
+/* MN10300 Scatterlist definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SCATTERLIST_H
+#define _ASM_SCATTERLIST_H
+
+#include <asm/types.h>
+
+/*
+ * Drivers must set either ->address or (preferred) page and ->offset
+ * to indicate where data must be transferred to/from.
+ *
+ * Using page is recommended since it handles highmem data as well as
+ * low mem. ->address is restricted to data which has a virtual mapping, and
+ * it will go away in the future. Updating to page can be automated very
+ * easily -- something like
+ *
+ * sg->address = some_ptr;
+ *
+ * can be rewritten as
+ *
+ * sg_set_page(virt_to_page(some_ptr));
+ * sg->offset = (unsigned long) some_ptr & ~PAGE_MASK;
+ *
+ * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens
+ */
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+       unsigned long   sg_magic;
+#endif
+       unsigned long   page_link;
+       unsigned int    offset;         /* for highmem, page offset */
+       dma_addr_t      dma_address;
+       unsigned int    length;
+};
+
+#define ISA_DMA_THRESHOLD (0x00ffffff)
+
+#endif /* _ASM_SCATTERLIST_H */
diff --git a/include/asm-mn10300/sections.h b/include/asm-mn10300/sections.h
new file mode 100644 (file)
index 0000000..2b8c516
--- /dev/null
@@ -0,0 +1 @@
+#include <asm-generic/sections.h>
diff --git a/include/asm-mn10300/semaphore.h b/include/asm-mn10300/semaphore.h
new file mode 100644 (file)
index 0000000..5a9e1ad
--- /dev/null
@@ -0,0 +1,169 @@
+/* MN10300 Semaphores
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SEMAPHORE_H
+#define _ASM_SEMAPHORE_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/rwsem.h>
+
+#define SEMAPHORE_DEBUG                0
+
+/*
+ * the semaphore definition
+ * - if count is >0 then there are tokens available on the semaphore for down
+ *   to collect
+ * - if count is <=0 then there are no spare tokens, and anyone that wants one
+ *   must wait
+ * - if wait_list is not empty, then there are processes waiting for the
+ *   semaphore
+ */
+struct semaphore {
+       atomic_t                count;          /* it's not really atomic, it's
+                                                * just that certain modules
+                                                * expect to be able to access
+                                                * it directly */
+       spinlock_t              wait_lock;
+       struct list_head        wait_list;
+#if SEMAPHORE_DEBUG
+       unsigned                __magic;
+#endif
+};
+
+#if SEMAPHORE_DEBUG
+# define __SEM_DEBUG_INIT(name) , (long)&(name).__magic
+#else
+# define __SEM_DEBUG_INIT(name)
+#endif
+
+
+#define __SEMAPHORE_INITIALIZER(name, init_count)                      \
+{                                                                      \
+       .count          = ATOMIC_INIT(init_count),                      \
+       .wait_lock      = __SPIN_LOCK_UNLOCKED((name).wait_lock),       \
+       .wait_list      = LIST_HEAD_INIT((name).wait_list)              \
+       __SEM_DEBUG_INIT(name)                                          \
+}
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+       struct semaphore name = __SEMAPHORE_INITIALIZER(name, count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name, 1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name, 0)
+
+static inline void sema_init(struct semaphore *sem, int val)
+{
+       *sem = (struct semaphore) __SEMAPHORE_INITIALIZER(*sem, val);
+}
+
+static inline void init_MUTEX(struct semaphore *sem)
+{
+       sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED(struct semaphore *sem)
+{
+       sema_init(sem, 0);
+}
+
+extern void __down(struct semaphore *sem, unsigned long flags);
+extern int  __down_interruptible(struct semaphore *sem, unsigned long flags);
+extern void __up(struct semaphore *sem);
+
+static inline void down(struct semaphore *sem)
+{
+       unsigned long flags;
+       int count;
+
+#if SEMAPHORE_DEBUG
+       CHECK_MAGIC(sem->__magic);
+#endif
+
+       spin_lock_irqsave(&sem->wait_lock, flags);
+       count = atomic_read(&sem->count);
+       if (likely(count > 0)) {
+               atomic_set(&sem->count, count - 1);
+               spin_unlock_irqrestore(&sem->wait_lock, flags);
+       } else {
+               __down(sem, flags);
+       }
+}
+
+static inline int down_interruptible(struct semaphore *sem)
+{
+       unsigned long flags;
+       int count, ret = 0;
+
+#if SEMAPHORE_DEBUG
+       CHECK_MAGIC(sem->__magic);
+#endif
+
+       spin_lock_irqsave(&sem->wait_lock, flags);
+       count = atomic_read(&sem->count);
+       if (likely(count > 0)) {
+               atomic_set(&sem->count, count - 1);
+               spin_unlock_irqrestore(&sem->wait_lock, flags);
+       } else {
+               ret = __down_interruptible(sem, flags);
+       }
+       return ret;
+}
+
+/*
+ * non-blockingly attempt to down() a semaphore.
+ * - returns zero if we acquired it
+ */
+static inline int down_trylock(struct semaphore *sem)
+{
+       unsigned long flags;
+       int count, success = 0;
+
+#if SEMAPHORE_DEBUG
+       CHECK_MAGIC(sem->__magic);
+#endif
+
+       spin_lock_irqsave(&sem->wait_lock, flags);
+       count = atomic_read(&sem->count);
+       if (likely(count > 0)) {
+               atomic_set(&sem->count, count - 1);
+               success = 1;
+       }
+       spin_unlock_irqrestore(&sem->wait_lock, flags);
+       return !success;
+}
+
+static inline void up(struct semaphore *sem)
+{
+       unsigned long flags;
+
+#if SEMAPHORE_DEBUG
+       CHECK_MAGIC(sem->__magic);
+#endif
+
+       spin_lock_irqsave(&sem->wait_lock, flags);
+       if (!list_empty(&sem->wait_list))
+               __up(sem);
+       else
+               atomic_set(&sem->count, atomic_read(&sem->count) + 1);
+       spin_unlock_irqrestore(&sem->wait_lock, flags);
+}
+
+static inline int sem_getcount(struct semaphore *sem)
+{
+       return atomic_read(&sem->count);
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/include/asm-mn10300/sembuf.h b/include/asm-mn10300/sembuf.h
new file mode 100644 (file)
index 0000000..301f3f9
--- /dev/null
@@ -0,0 +1,25 @@
+#ifndef _ASM_SEMBUF_H
+#define _ASM_SEMBUF_H
+
+/*
+ * The semid64_ds structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+       struct ipc64_perm sem_perm;             /* permissions .. see ipc.h */
+       __kernel_time_t sem_otime;              /* last semop time */
+       unsigned long   __unused1;
+       __kernel_time_t sem_ctime;              /* last change time */
+       unsigned long   __unused2;
+       unsigned long   sem_nsems;              /* no. of semaphores in array */
+       unsigned long   __unused3;
+       unsigned long   __unused4;
+};
+
+#endif /* _ASM_SEMBUF_H */
diff --git a/include/asm-mn10300/serial-regs.h b/include/asm-mn10300/serial-regs.h
new file mode 100644 (file)
index 0000000..6498469
--- /dev/null
@@ -0,0 +1,160 @@
+/* MN10300 on-board serial port module registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SERIAL_REGS_H
+#define _ASM_SERIAL_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+/* serial port 0 */
+#define        SC0CTR                  __SYSREG(0xd4002000, u16)       /* control reg */
+#define        SC01CTR_CK              0x0007  /* clock source select */
+#define        SC0CTR_CK_TM8UFLOW_8    0x0000  /* - 1/8 timer 8 underflow (serial port 0 only) */
+#define        SC1CTR_CK_TM9UFLOW_8    0x0000  /* - 1/8 timer 9 underflow (serial port 1 only) */
+#define        SC01CTR_CK_IOCLK_8      0x0001  /* - 1/8 IOCLK */
+#define        SC01CTR_CK_IOCLK_32     0x0002  /* - 1/32 IOCLK */
+#define        SC0CTR_CK_TM2UFLOW_2    0x0003  /* - 1/2 timer 2 underflow (serial port 0 only) */
+#define        SC1CTR_CK_TM3UFLOW_2    0x0003  /* - 1/2 timer 3 underflow (serial port 1 only) */
+#define        SC0CTR_CK_TM0UFLOW_8    0x0004  /* - 1/8 timer 1 underflow (serial port 0 only) */
+#define        SC1CTR_CK_TM1UFLOW_8    0x0004  /* - 1/8 timer 2 underflow (serial port 1 only) */
+#define        SC0CTR_CK_TM2UFLOW_8    0x0005  /* - 1/8 timer 2 underflow (serial port 0 only) */
+#define        SC1CTR_CK_TM3UFLOW_8    0x0005  /* - 1/8 timer 3 underflow (serial port 1 only) */
+#define        SC01CTR_CK_EXTERN_8     0x0006  /* - 1/8 external closk */
+#define        SC01CTR_CK_EXTERN       0x0007  /* - external closk */
+#define        SC01CTR_STB             0x0008  /* stop bit select */
+#define        SC01CTR_STB_1BIT        0x0000  /* - 1 stop bit */
+#define        SC01CTR_STB_2BIT        0x0008  /* - 2 stop bits */
+#define        SC01CTR_PB              0x0070  /* parity bit select */
+#define        SC01CTR_PB_NONE         0x0000  /* - no parity */
+#define        SC01CTR_PB_FIXED0       0x0040  /* - fixed at 0 */
+#define        SC01CTR_PB_FIXED1       0x0050  /* - fixed at 1 */
+#define        SC01CTR_PB_EVEN         0x0060  /* - even parity */
+#define        SC01CTR_PB_ODD          0x0070  /* - odd parity */
+#define        SC01CTR_CLN             0x0080  /* character length */
+#define        SC01CTR_CLN_7BIT        0x0000  /* - 7 bit chars */
+#define        SC01CTR_CLN_8BIT        0x0080  /* - 8 bit chars */
+#define        SC01CTR_TOE             0x0100  /* T input output enable */
+#define        SC01CTR_OD              0x0200  /* bit order select */
+#define        SC01CTR_OD_LSBFIRST     0x0000  /* - LSB first */
+#define        SC01CTR_OD_MSBFIRST     0x0200  /* - MSB first */
+#define        SC01CTR_MD              0x0c00  /* mode select */
+#define SC01CTR_MD_STST_SYNC   0x0000  /* - start-stop synchronous */
+#define SC01CTR_MD_CLOCK_SYNC1 0x0400  /* - clock synchronous 1 */
+#define SC01CTR_MD_I2C         0x0800  /* - I2C mode */
+#define SC01CTR_MD_CLOCK_SYNC2 0x0c00  /* - clock synchronous 2 */
+#define        SC01CTR_IIC             0x1000  /* I2C mode select */
+#define        SC01CTR_BKE             0x2000  /* break transmit enable */
+#define        SC01CTR_RXE             0x4000  /* receive enable */
+#define        SC01CTR_TXE             0x8000  /* transmit enable */
+
+#define        SC0ICR                  __SYSREG(0xd4002004, u8)        /* interrupt control reg */
+#define SC01ICR_DMD            0x80    /* output data mode */
+#define SC01ICR_TD             0x20    /* transmit DMA trigger cause */
+#define SC01ICR_TI             0x10    /* transmit interrupt cause */
+#define SC01ICR_RES            0x04    /* receive error select */
+#define SC01ICR_RI             0x01    /* receive interrupt cause */
+
+#define        SC0TXB                  __SYSREG(0xd4002008, u8)        /* transmit buffer reg */
+#define        SC0RXB                  __SYSREG(0xd4002009, u8)        /* receive buffer reg */
+
+#define        SC0STR                  __SYSREG(0xd400200c, u16)       /* status reg */
+#define SC01STR_OEF            0x0001  /* overrun error found */
+#define SC01STR_PEF            0x0002  /* parity error found */
+#define SC01STR_FEF            0x0004  /* framing error found */
+#define SC01STR_RBF            0x0010  /* receive buffer status */
+#define SC01STR_TBF            0x0020  /* transmit buffer status */
+#define SC01STR_RXF            0x0040  /* receive status */
+#define SC01STR_TXF            0x0080  /* transmit status */
+#define SC01STR_STF            0x0100  /* I2C start sequence found */
+#define SC01STR_SPF            0x0200  /* I2C stop sequence found */
+
+#define SC0RXIRQ               20      /* timer 0 Receive IRQ */
+#define SC0TXIRQ               21      /* timer 0 Transmit IRQ */
+
+#define        SC0RXICR                GxICR(SC0RXIRQ) /* serial 0 receive intr ctrl reg */
+#define        SC0TXICR                GxICR(SC0TXIRQ) /* serial 0 transmit intr ctrl reg */
+
+/* serial port 1 */
+#define        SC1CTR                  __SYSREG(0xd4002010, u16)       /* serial port 1 control */
+#define        SC1ICR                  __SYSREG(0xd4002014, u8)        /* interrupt control reg */
+#define        SC1TXB                  __SYSREG(0xd4002018, u8)        /* transmit buffer reg */
+#define        SC1RXB                  __SYSREG(0xd4002019, u8)        /* receive buffer reg */
+#define        SC1STR                  __SYSREG(0xd400201c, u16)       /* status reg */
+
+#define SC1RXIRQ               22      /* timer 1 Receive IRQ */
+#define SC1TXIRQ               23      /* timer 1 Transmit IRQ */
+
+#define        SC1RXICR                GxICR(SC1RXIRQ) /* serial 1 receive intr ctrl reg */
+#define        SC1TXICR                GxICR(SC1TXIRQ) /* serial 1 transmit intr ctrl reg */
+
+/* serial port 2 */
+#define        SC2CTR                  __SYSREG(0xd4002020, u16)       /* control reg */
+#define        SC2CTR_CK               0x0003  /* clock source select */
+#define        SC2CTR_CK_TM10UFLOW     0x0000  /* - timer 10 underflow */
+#define        SC2CTR_CK_TM2UFLOW      0x0001  /* - timer 2 underflow */
+#define        SC2CTR_CK_EXTERN        0x0002  /* - external closk */
+#define        SC2CTR_CK_TM3UFLOW      0x0003  /* - timer 3 underflow */
+#define        SC2CTR_STB              0x0008  /* stop bit select */
+#define        SC2CTR_STB_1BIT         0x0000  /* - 1 stop bit */
+#define        SC2CTR_STB_2BIT         0x0008  /* - 2 stop bits */
+#define        SC2CTR_PB               0x0070  /* parity bit select */
+#define        SC2CTR_PB_NONE          0x0000  /* - no parity */
+#define        SC2CTR_PB_FIXED0        0x0040  /* - fixed at 0 */
+#define        SC2CTR_PB_FIXED1        0x0050  /* - fixed at 1 */
+#define        SC2CTR_PB_EVEN          0x0060  /* - even parity */
+#define        SC2CTR_PB_ODD           0x0070  /* - odd parity */
+#define        SC2CTR_CLN              0x0080  /* character length */
+#define        SC2CTR_CLN_7BIT         0x0000  /* - 7 bit chars */
+#define        SC2CTR_CLN_8BIT         0x0080  /* - 8 bit chars */
+#define        SC2CTR_TWE              0x0100  /* transmit wait enable (enable XCTS control) */
+#define        SC2CTR_OD               0x0200  /* bit order select */
+#define        SC2CTR_OD_LSBFIRST      0x0000  /* - LSB first */
+#define        SC2CTR_OD_MSBFIRST      0x0200  /* - MSB first */
+#define        SC2CTR_TWS              0x1000  /* transmit wait select */
+#define        SC2CTR_TWS_XCTS_HIGH    0x0000  /* - interrupt TX when XCTS high */
+#define        SC2CTR_TWS_XCTS_LOW     0x1000  /* - interrupt TX when XCTS low */
+#define        SC2CTR_BKE              0x2000  /* break transmit enable */
+#define        SC2CTR_RXE              0x4000  /* receive enable */
+#define        SC2CTR_TXE              0x8000  /* transmit enable */
+
+#define        SC2ICR                  __SYSREG(0xd4002024, u8)        /* interrupt control reg */
+#define SC2ICR_TD              0x20    /* transmit DMA trigger cause */
+#define SC2ICR_TI              0x10    /* transmit interrupt cause */
+#define SC2ICR_RES             0x04    /* receive error select */
+#define SC2ICR_RI              0x01    /* receive interrupt cause */
+
+#define        SC2TXB                  __SYSREG(0xd4002018, u8)        /* transmit buffer reg */
+#define        SC2RXB                  __SYSREG(0xd4002019, u8)        /* receive buffer reg */
+#define        SC2STR                  __SYSREG(0xd400201c, u8)        /* status reg */
+#define SC2STR_OEF             0x0001  /* overrun error found */
+#define SC2STR_PEF             0x0002  /* parity error found */
+#define SC2STR_FEF             0x0004  /* framing error found */
+#define SC2STR_CTS             0x0008  /* XCTS input pin status (0 means high) */
+#define SC2STR_RBF             0x0010  /* receive buffer status */
+#define SC2STR_TBF             0x0020  /* transmit buffer status */
+#define SC2STR_RXF             0x0040  /* receive status */
+#define SC2STR_TXF             0x0080  /* transmit status */
+
+#define        SC2TIM                  __SYSREG(0xd400202d, u8)        /* status reg */
+
+#define SC2RXIRQ               24      /* serial 2 Receive IRQ */
+#define SC2TXIRQ               25      /* serial 2 Transmit IRQ */
+
+#define        SC2RXICR                GxICR(SC2RXIRQ) /* serial 2 receive intr ctrl reg */
+#define        SC2TXICR                GxICR(SC2TXIRQ) /* serial 2 transmit intr ctrl reg */
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SERIAL_REGS_H */
diff --git a/include/asm-mn10300/serial.h b/include/asm-mn10300/serial.h
new file mode 100644 (file)
index 0000000..99785a9
--- /dev/null
@@ -0,0 +1,36 @@
+/* Standard UART definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+/*
+ * The ASB2305 has an 18.432 MHz clock the UART
+ */
+#define BASE_BAUD      (18432000 / 16)
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS  (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS  (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#endif
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define FOURPORT_FLAGS ASYNC_FOURPORT
+#define ACCENT_FLAGS   0
+#define BOCA_FLAGS     0
+#define HUB6_FLAGS     0
+#define RS_TABLE_SIZE  64
+#else
+#define RS_TABLE_SIZE
+#endif
+
+#include <asm/unit/serial.h>
diff --git a/include/asm-mn10300/setup.h b/include/asm-mn10300/setup.h
new file mode 100644 (file)
index 0000000..08356c8
--- /dev/null
@@ -0,0 +1,17 @@
+/* MN10300 Setup declarations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SETUP_H
+#define _ASM_SETUP_H
+
+extern void __init unit_setup(void);
+extern void __init unit_init_IRQ(void);
+
+#endif /* _ASM_SETUP_H */
diff --git a/include/asm-mn10300/shmbuf.h b/include/asm-mn10300/shmbuf.h
new file mode 100644 (file)
index 0000000..8f300cc
--- /dev/null
@@ -0,0 +1,42 @@
+#ifndef _ASM_SHMBUF_H
+#define _ASM_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+       struct ipc64_perm       shm_perm;       /* operation perms */
+       size_t                  shm_segsz;      /* size of segment (bytes) */
+       __kernel_time_t         shm_atime;      /* last attach time */
+       unsigned long           __unused1;
+       __kernel_time_t         shm_dtime;      /* last detach time */
+       unsigned long           __unused2;
+       __kernel_time_t         shm_ctime;      /* last change time */
+       unsigned long           __unused3;
+       __kernel_pid_t          shm_cpid;       /* pid of creator */
+       __kernel_pid_t          shm_lpid;       /* pid of last operator */
+       unsigned long           shm_nattch;     /* no. of current attaches */
+       unsigned long           __unused4;
+       unsigned long           __unused5;
+};
+
+struct shminfo64 {
+       unsigned long   shmmax;
+       unsigned long   shmmin;
+       unsigned long   shmmni;
+       unsigned long   shmseg;
+       unsigned long   shmall;
+       unsigned long   __unused1;
+       unsigned long   __unused2;
+       unsigned long   __unused3;
+       unsigned long   __unused4;
+};
+
+#endif /* _ASM_SHMBUF_H */
diff --git a/include/asm-mn10300/shmparam.h b/include/asm-mn10300/shmparam.h
new file mode 100644 (file)
index 0000000..ab666ed
--- /dev/null
@@ -0,0 +1,6 @@
+#ifndef _ASM_SHMPARAM_H
+#define _ASM_SHMPARAM_H
+
+#define        SHMLBA PAGE_SIZE                 /* attach addr a multiple of this */
+
+#endif /* _ASM_SHMPARAM_H */
diff --git a/include/asm-mn10300/sigcontext.h b/include/asm-mn10300/sigcontext.h
new file mode 100644 (file)
index 0000000..4de3aff
--- /dev/null
@@ -0,0 +1,52 @@
+/* MN10300 Userspace signal context
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SIGCONTEXT_H
+#define _ASM_SIGCONTEXT_H
+
+struct fpucontext {
+       /* Regular FPU environment */
+       unsigned long   fs[32];         /* fpu registers */
+       unsigned long   fpcr;           /* fpu control register */
+};
+
+struct sigcontext {
+       unsigned long   d0;
+       unsigned long   d1;
+       unsigned long   d2;
+       unsigned long   d3;
+       unsigned long   a0;
+       unsigned long   a1;
+       unsigned long   a2;
+       unsigned long   a3;
+       unsigned long   e0;
+       unsigned long   e1;
+       unsigned long   e2;
+       unsigned long   e3;
+       unsigned long   e4;
+       unsigned long   e5;
+       unsigned long   e6;
+       unsigned long   e7;
+       unsigned long   lar;
+       unsigned long   lir;
+       unsigned long   mdr;
+       unsigned long   mcvf;
+       unsigned long   mcrl;
+       unsigned long   mcrh;
+       unsigned long   mdrq;
+       unsigned long   sp;
+       unsigned long   epsw;
+       unsigned long   pc;
+       struct fpucontext *fpucontext;
+       unsigned long   oldmask;
+};
+
+
+#endif /* _ASM_SIGCONTEXT_H */
diff --git a/include/asm-mn10300/siginfo.h b/include/asm-mn10300/siginfo.h
new file mode 100644 (file)
index 0000000..0815d29
--- /dev/null
@@ -0,0 +1 @@
+#include <asm-generic/siginfo.h>
diff --git a/include/asm-mn10300/signal.h b/include/asm-mn10300/signal.h
new file mode 100644 (file)
index 0000000..e98817c
--- /dev/null
@@ -0,0 +1,171 @@
+/* MN10300 Signal definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SIGNAL_H
+#define _ASM_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG          64
+#define _NSIG_BPW      32
+#define _NSIG_WORDS    (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;            /* at least 32 bits */
+
+typedef struct {
+       unsigned long   sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG           32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP          1
+#define SIGINT          2
+#define SIGQUIT                 3
+#define SIGILL          4
+#define SIGTRAP                 5
+#define SIGABRT                 6
+#define SIGIOT          6
+#define SIGBUS          7
+#define SIGFPE          8
+#define SIGKILL                 9
+#define SIGUSR1                10
+#define SIGSEGV                11
+#define SIGUSR2                12
+#define SIGPIPE                13
+#define SIGALRM                14
+#define SIGTERM                15
+#define SIGSTKFLT      16
+#define SIGCHLD                17
+#define SIGCONT                18
+#define SIGSTOP                19
+#define SIGTSTP                20
+#define SIGTTIN                21
+#define SIGTTOU                22
+#define SIGURG         23
+#define SIGXCPU                24
+#define SIGXFSZ                25
+#define SIGVTALRM      26
+#define SIGPROF                27
+#define SIGWINCH       28
+#define SIGIO          29
+#define SIGPOLL                SIGIO
+/*
+#define SIGLOST                29
+*/
+#define SIGPWR         30
+#define SIGSYS         31
+#define        SIGUNUSED       31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN       32
+#define SIGRTMAX       (_NSIG-1)
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP   0x00000001U
+#define SA_NOCLDWAIT   0x00000002U
+#define SA_SIGINFO     0x00000004U
+#define SA_ONSTACK     0x08000000U
+#define SA_RESTART     0x10000000U
+#define SA_NODEFER     0x40000000U
+#define SA_RESETHAND   0x80000000U
+
+#define SA_NOMASK      SA_NODEFER
+#define SA_ONESHOT     SA_RESETHAND
+
+#define SA_RESTORER    0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK     1
+#define SS_DISABLE     2
+
+#define MINSIGSTKSZ    2048
+#define SIGSTKSZ       8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+       __sighandler_t sa_handler;
+       old_sigset_t sa_mask;
+       unsigned long sa_flags;
+       __sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+       __sighandler_t sa_handler;
+       unsigned long sa_flags;
+       __sigrestore_t sa_restorer;
+       sigset_t sa_mask;               /* mask last for extensibility */
+};
+
+struct k_sigaction {
+       struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+       union {
+         __sighandler_t _sa_handler;
+         void (*_sa_sigaction)(int, struct siginfo *, void *);
+       } _u;
+       sigset_t sa_mask;
+       unsigned long sa_flags;
+       void (*sa_restorer)(void);
+};
+
+#define sa_handler     _u._sa_handler
+#define sa_sigaction   _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+       void __user     *ss_sp;
+       int             ss_flags;
+       size_t          ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+
+struct pt_regs;
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SIGNAL_H */
diff --git a/include/asm-mn10300/smp.h b/include/asm-mn10300/smp.h
new file mode 100644 (file)
index 0000000..4eb8c61
--- /dev/null
@@ -0,0 +1,18 @@
+/* MN10300 SMP support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SMP_H
+#define _ASM_SMP_H
+
+#ifdef CONFIG_SMP
+#error SMP not yet supported for MN10300
+#endif
+
+#endif
diff --git a/include/asm-mn10300/socket.h b/include/asm-mn10300/socket.h
new file mode 100644 (file)
index 0000000..99ca648
--- /dev/null
@@ -0,0 +1,55 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET     1
+
+#define SO_DEBUG       1
+#define SO_REUSEADDR   2
+#define SO_TYPE                3
+#define SO_ERROR       4
+#define SO_DONTROUTE   5
+#define SO_BROADCAST   6
+#define SO_SNDBUF      7
+#define SO_RCVBUF      8
+#define SO_SNDBUFFORCE 32
+#define SO_RCVBUFFORCE 33
+#define SO_KEEPALIVE   9
+#define SO_OOBINLINE   10
+#define SO_NO_CHECK    11
+#define SO_PRIORITY    12
+#define SO_LINGER      13
+#define SO_BSDCOMPAT   14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED    16
+#define SO_PEERCRED    17
+#define SO_RCVLOWAT    18
+#define SO_SNDLOWAT    19
+#define SO_RCVTIMEO    20
+#define SO_SNDTIMEO    21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION             22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT       23
+#define SO_SECURITY_ENCRYPTION_NETWORK         24
+
+#define SO_BINDTODEVICE        25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME            28
+#define SO_TIMESTAMP           29
+#define SCM_TIMESTAMP          SO_TIMESTAMP
+
+#define SO_ACCEPTCONN          30
+
+#define SO_PEERSEC             31
+#define SO_PASSSEC             34
+#define SO_TIMESTAMPNS         35
+#define SCM_TIMESTAMPNS                SO_TIMESTAMPNS
+
+#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-mn10300/sockios.h b/include/asm-mn10300/sockios.h
new file mode 100644 (file)
index 0000000..b03043a
--- /dev/null
@@ -0,0 +1,13 @@
+#ifndef _ASM_SOCKIOS_H
+#define _ASM_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN      0x8901
+#define SIOCSPGRP      0x8902
+#define FIOGETOWN      0x8903
+#define SIOCGPGRP      0x8904
+#define SIOCATMARK     0x8905
+#define SIOCGSTAMP     0x8906          /* Get stamp */
+#define SIOCGSTAMPNS   0x8907          /* Get stamp (timespec) */
+
+#endif /* _ASM_SOCKIOS_H */
diff --git a/include/asm-mn10300/spinlock.h b/include/asm-mn10300/spinlock.h
new file mode 100644 (file)
index 0000000..4bf9c8b
--- /dev/null
@@ -0,0 +1,16 @@
+/* MN10300 spinlock support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SPINLOCK_H
+#define _ASM_SPINLOCK_H
+
+#error SMP spinlocks not implemented for MN10300
+
+#endif /* _ASM_SPINLOCK_H */
diff --git a/include/asm-mn10300/stat.h b/include/asm-mn10300/stat.h
new file mode 100644 (file)
index 0000000..63ff837
--- /dev/null
@@ -0,0 +1,78 @@
+#ifndef _ASM_STAT_H
+#define _ASM_STAT_H
+
+struct __old_kernel_stat {
+       unsigned short st_dev;
+       unsigned short st_ino;
+       unsigned short st_mode;
+       unsigned short st_nlink;
+       unsigned short st_uid;
+       unsigned short st_gid;
+       unsigned short st_rdev;
+       unsigned long  st_size;
+       unsigned long  st_atime;
+       unsigned long  st_mtime;
+       unsigned long  st_ctime;
+};
+
+struct stat {
+       unsigned long  st_dev;
+       unsigned long  st_ino;
+       unsigned short st_mode;
+       unsigned short st_nlink;
+       unsigned short st_uid;
+       unsigned short st_gid;
+       unsigned long  st_rdev;
+       unsigned long  st_size;
+       unsigned long  st_blksize;
+       unsigned long  st_blocks;
+       unsigned long  st_atime;
+       unsigned long  st_atime_nsec;
+       unsigned long  st_mtime;
+       unsigned long  st_mtime_nsec;
+       unsigned long  st_ctime;
+       unsigned long  st_ctime_nsec;
+       unsigned long  __unused4;
+       unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+       unsigned long long      st_dev;
+       unsigned char   __pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO       1
+       unsigned long   __st_ino;
+
+       unsigned int    st_mode;
+       unsigned int    st_nlink;
+
+       unsigned long   st_uid;
+       unsigned long   st_gid;
+
+       unsigned long long      st_rdev;
+       unsigned char   __pad3[4];
+
+       long long       st_size;
+       unsigned long   st_blksize;
+
+       unsigned long   st_blocks;      /* Number 512-byte blocks allocated. */
+       unsigned long   __pad4;         /* future possible st_blocks high bits */
+
+       unsigned long   st_atime;
+       unsigned long   st_atime_nsec;
+
+       unsigned long   st_mtime;
+       unsigned int    st_mtime_nsec;
+
+       unsigned long   st_ctime;
+       unsigned long   st_ctime_nsec;
+
+       unsigned long long      st_ino;
+};
+
+#define STAT_HAVE_NSEC 1
+
+#endif /* _ASM_STAT_H */
diff --git a/include/asm-mn10300/statfs.h b/include/asm-mn10300/statfs.h
new file mode 100644 (file)
index 0000000..0b91fe1
--- /dev/null
@@ -0,0 +1 @@
+#include <asm-generic/statfs.h>
diff --git a/include/asm-mn10300/string.h b/include/asm-mn10300/string.h
new file mode 100644 (file)
index 0000000..47dbd43
--- /dev/null
@@ -0,0 +1,32 @@
+/* MN10300 Optimised string functions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_STRING_H
+#define _ASM_STRING_H
+
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+
+extern void *memset(void *dest, int ch, size_t count);
+extern void *memcpy(void *dest, const void *src, size_t count);
+extern void *memmove(void *dest, const void *src, size_t count);
+
+
+extern void __struct_cpy_bug(void);
+#define struct_cpy(x, y)                       \
+({                                              \
+       if (sizeof(*(x)) != sizeof(*(y)))       \
+               __struct_cpy_bug;               \
+       memcpy(x, y, sizeof(*(x)));             \
+})
+
+#endif /* _ASM_STRING_H */
diff --git a/include/asm-mn10300/system.h b/include/asm-mn10300/system.h
new file mode 100644 (file)
index 0000000..8214fb7
--- /dev/null
@@ -0,0 +1,237 @@
+/* MN10300 System definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SYSTEM_H
+#define _ASM_SYSTEM_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+
+struct task_struct;
+struct thread_struct;
+
+extern asmlinkage
+struct task_struct *__switch_to(struct thread_struct *prev,
+                               struct thread_struct *next,
+                               struct task_struct *prev_task);
+
+/* context switching is now performed out-of-line in switch_to.S */
+#define switch_to(prev, next, last)                                    \
+do {                                                                   \
+       current->thread.wchan = (u_long) __builtin_return_address(0);   \
+       (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \
+       mb();                                                           \
+       current->thread.wchan = 0;                                      \
+} while (0)
+
+#define arch_align_stack(x) (x)
+
+#define nop() asm volatile ("nop")
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ *
+ * For now, "wmb()" doesn't actually do anything, as all
+ * Intel CPU's follow what Intel calls a *Processor Order*,
+ * in which all writes are seen in the program order even
+ * outside the CPU.
+ *
+ * I expect future Intel CPU's to have a weaker ordering,
+ * but I'd also expect them to finally get their act together
+ * and add some real memory barriers if so.
+ *
+ * Some non intel clones support out of order store. wmb() ceases to be a
+ * nop for these.
+ */
+
+#define mb()   asm volatile ("": : :"memory")
+#define rmb()  mb()
+#define wmb()  asm volatile ("": : :"memory")
+
+#ifdef CONFIG_SMP
+#define smp_mb()       mb()
+#define smp_rmb()      rmb()
+#define smp_wmb()      wmb()
+#else
+#define smp_mb()       barrier()
+#define smp_rmb()      barrier()
+#define smp_wmb()      barrier()
+#endif
+
+#define set_mb(var, value)  do { var = value;  mb(); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+#define read_barrier_depends()         do {} while (0)
+#define smp_read_barrier_depends()     do {} while (0)
+
+/*****************************************************************************/
+/*
+ * interrupt control
+ * - "disabled": run in IM1/2
+ *   - level 0 - GDB stub
+ *   - level 1 - virtual serial DMA (if present)
+ *   - level 5 - normal interrupt priority
+ *   - level 6 - timer interrupt
+ * - "enabled":  run in IM7
+ */
+#ifdef CONFIG_MN10300_TTYSM
+#define MN10300_CLI_LEVEL      EPSW_IM_2
+#else
+#define MN10300_CLI_LEVEL      EPSW_IM_1
+#endif
+
+#define local_save_flags(x)                    \
+do {                                           \
+       typecheck(unsigned long, x);            \
+       asm volatile(                           \
+               "       mov epsw,%0     \n"     \
+               : "=d"(x)                       \
+               );                              \
+} while (0)
+
+#define local_irq_disable()                                            \
+do {                                                                   \
+       asm volatile(                                                   \
+               "       and %0,epsw     \n"                             \
+               "       or %1,epsw      \n"                             \
+               "       nop             \n"                             \
+               "       nop             \n"                             \
+               "       nop             \n"                             \
+               :                                                       \
+               : "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL)       \
+               );                                                      \
+} while (0)
+
+#define local_irq_save(x)                      \
+do {                                           \
+       local_save_flags(x);                    \
+       local_irq_disable();                    \
+} while (0)
+
+/*
+ * we make sure local_irq_enable() doesn't cause priority inversion
+ */
+#ifndef __ASSEMBLY__
+
+extern unsigned long __mn10300_irq_enabled_epsw;
+
+#endif
+
+#define local_irq_enable()                                             \
+do {                                                                   \
+       unsigned long tmp;                                              \
+                                                                       \
+       asm volatile(                                                   \
+               "       mov     epsw,%0         \n"                     \
+               "       and     %1,%0           \n"                     \
+               "       or      %2,%0           \n"                     \
+               "       mov     %0,epsw         \n"                     \
+               : "=&d"(tmp)                                            \
+               : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw)        \
+               );                                                      \
+} while (0)
+
+#define local_irq_restore(x)                   \
+do {                                           \
+       typecheck(unsigned long, x);            \
+       asm volatile(                           \
+               "       mov %0,epsw     \n"     \
+               "       nop             \n"     \
+               "       nop             \n"     \
+               "       nop             \n"     \
+               :                               \
+               : "d"(x)                        \
+               : "memory", "cc"                \
+               );                              \
+} while (0)
+
+#define irqs_disabled()                                \
+({                                             \
+       unsigned long flags;                    \
+       local_save_flags(flags);                \
+       (flags & EPSW_IM) <= MN10300_CLI_LEVEL; \
+})
+
+/* hook to save power by halting the CPU
+ * - called from the idle loop
+ * - must reenable interrupts (which takes three instruction cycles to complete)
+ */
+#define safe_halt()                                                    \
+do {                                                                   \
+       asm volatile("  or      %0,epsw \n"                             \
+                    "  nop             \n"                             \
+                    "  nop             \n"                             \
+                    "  bset    %2,(%1) \n"                             \
+                    :                                                  \
+                    : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP)\
+                    : "cc"                                             \
+                    );                                                 \
+} while (0)
+
+#define STI    or EPSW_IE|EPSW_IM,epsw
+#define CLI    and ~EPSW_IM,epsw; or EPSW_IE|MN10300_CLI_LEVEL,epsw; nop; nop; nop
+
+/*****************************************************************************/
+/*
+ * MN10300 doesn't actually have an exchange instruction
+ */
+#ifndef __ASSEMBLY__
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((struct __xchg_dummy *)(x))
+
+static inline
+unsigned long __xchg(volatile unsigned long *m, unsigned long val)
+{
+       unsigned long retval;
+       unsigned long flags;
+
+       local_irq_save(flags);
+       retval = *m;
+       *m = val;
+       local_irq_restore(flags);
+       return retval;
+}
+
+#define xchg(ptr, v)                                           \
+       ((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr),    \
+                                    (unsigned long)(v)))
+
+static inline unsigned long __cmpxchg(volatile unsigned long *m,
+                                     unsigned long old, unsigned long new)
+{
+       unsigned long retval;
+       unsigned long flags;
+
+       local_irq_save(flags);
+       retval = *m;
+       if (retval == old)
+               *m = new;
+       local_irq_restore(flags);
+       return retval;
+}
+
+#define cmpxchg(ptr, o, n)                                     \
+       ((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \
+                                       (unsigned long)(o),     \
+                                       (unsigned long)(n)))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_SYSTEM_H */
diff --git a/include/asm-mn10300/termbits.h b/include/asm-mn10300/termbits.h
new file mode 100644 (file)
index 0000000..eb2b0dc
--- /dev/null
@@ -0,0 +1,200 @@
+#ifndef _ASM_TERMBITS_H
+#define _ASM_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char  cc_t;
+typedef unsigned int   speed_t;
+typedef unsigned int   tcflag_t;
+
+#define NCCS 19
+struct termios {
+       tcflag_t c_iflag;               /* input mode flags */
+       tcflag_t c_oflag;               /* output mode flags */
+       tcflag_t c_cflag;               /* control mode flags */
+       tcflag_t c_lflag;               /* local mode flags */
+       cc_t c_line;                    /* line discipline */
+       cc_t c_cc[NCCS];                /* control characters */
+};
+
+struct termios2 {
+       tcflag_t c_iflag;               /* input mode flags */
+       tcflag_t c_oflag;               /* output mode flags */
+       tcflag_t c_cflag;               /* control mode flags */
+       tcflag_t c_lflag;               /* local mode flags */
+       cc_t c_line;                    /* line discipline */
+       cc_t c_cc[NCCS];                /* control characters */
+       speed_t c_ispeed;               /* input speed */
+       speed_t c_ospeed;               /* output speed */
+};
+
+struct ktermios {
+       tcflag_t c_iflag;               /* input mode flags */
+       tcflag_t c_oflag;               /* output mode flags */
+       tcflag_t c_cflag;               /* control mode flags */
+       tcflag_t c_lflag;               /* local mode flags */
+       cc_t c_line;                    /* line discipline */
+       cc_t c_cc[NCCS];                /* control characters */
+       speed_t c_ispeed;               /* input speed */
+       speed_t c_ospeed;               /* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK 0000001
+#define BRKINT 0000002
+#define IGNPAR 0000004
+#define PARMRK 0000010
+#define INPCK  0000020
+#define ISTRIP 0000040
+#define INLCR  0000100
+#define IGNCR  0000200
+#define ICRNL  0000400
+#define IUCLC  0001000
+#define IXON   0002000
+#define IXANY  0004000
+#define IXOFF  0010000
+#define IMAXBEL        0020000
+#define IUTF8  0040000
+
+/* c_oflag bits */
+#define OPOST  0000001
+#define OLCUC  0000002
+#define ONLCR  0000004
+#define OCRNL  0000010
+#define ONOCR  0000020
+#define ONLRET 0000040
+#define OFILL  0000100
+#define OFDEL  0000200
+#define NLDLY  0000400
+#define   NL0  0000000
+#define   NL1  0000400
+#define CRDLY  0003000
+#define   CR0  0000000
+#define   CR1  0001000
+#define   CR2  0002000
+#define   CR3  0003000
+#define TABDLY 0014000
+#define   TAB0 0000000
+#define   TAB1 0004000
+#define   TAB2 0010000
+#define   TAB3 0014000
+#define   XTABS        0014000
+#define BSDLY  0020000
+#define   BS0  0000000
+#define   BS1  0020000
+#define VTDLY  0040000
+#define   VT0  0000000
+#define   VT1  0040000
+#define FFDLY  0100000
+#define   FF0  0000000
+#define   FF1  0100000
+
+/* c_cflag bit meaning */
+#define CBAUD  0010017
+#define  B0    0000000         /* hang up */
+#define  B50   0000001
+#define  B75   0000002
+#define  B110  0000003
+#define  B134  0000004
+#define  B150  0000005
+#define  B200  0000006
+#define  B300  0000007
+#define  B600  0000010
+#define  B1200 0000011
+#define  B1800 0000012
+#define  B2400 0000013
+#define  B4800 0000014
+#define  B9600 0000015
+#define  B19200        0000016
+#define  B38400        0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE  0000060
+#define   CS5  0000000
+#define   CS6  0000020
+#define   CS7  0000040
+#define   CS8  0000060
+#define CSTOPB 0000100
+#define CREAD  0000200
+#define PARENB 0000400
+#define PARODD 0001000
+#define HUPCL  0002000
+#define CLOCAL 0004000
+#define CBAUDEX 0010000
+#define   BOTHER  0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD   002003600000  /* input baud rate (not used) */
+#define CTVB     004000000000          /* VisioBraille Terminal flow control */
+#define CMSPAR   010000000000          /* mark or space (stick) parity */
+#define CRTSCTS          020000000000          /* flow control */
+
+#define IBSHIFT          16            /* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG   0000001
+#define ICANON 0000002
+#define XCASE  0000004
+#define ECHO   0000010
+#define ECHOE  0000020
+#define ECHOK  0000040
+#define ECHONL 0000100
+#define NOFLSH 0000200
+#define TOSTOP 0000400
+#define ECHOCTL        0001000
+#define ECHOPRT        0002000
+#define ECHOKE 0004000
+#define FLUSHO 0010000
+#define PENDIN 0040000
+#define IEXTEN 0100000
+
+/* tcflow() and TCXONC use these */
+#define        TCOOFF          0
+#define        TCOON           1
+#define        TCIOFF          2
+#define        TCION           3
+
+/* tcflush() and TCFLSH use these */
+#define        TCIFLUSH        0
+#define        TCOFLUSH        1
+#define        TCIOFLUSH       2
+
+/* tcsetattr uses these */
+#define        TCSANOW         0
+#define        TCSADRAIN       1
+#define        TCSAFLUSH       2
+
+#endif /* _ASM_TERMBITS_H */
diff --git a/include/asm-mn10300/termios.h b/include/asm-mn10300/termios.h
new file mode 100644 (file)
index 0000000..dd7cf61
--- /dev/null
@@ -0,0 +1,92 @@
+#ifndef _ASM_TERMIOS_H
+#define _ASM_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+       unsigned short ws_row;
+       unsigned short ws_col;
+       unsigned short ws_xpixel;
+       unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+       unsigned short c_iflag;         /* input mode flags */
+       unsigned short c_oflag;         /* output mode flags */
+       unsigned short c_cflag;         /* control mode flags */
+       unsigned short c_lflag;         /* local mode flags */
+       unsigned char c_line;           /* line discipline */
+       unsigned char c_cc[NCC];        /* control characters */
+};
+
+#ifdef __KERNEL__
+/*     intr=^C         quit=^|         erase=del       kill=^U
+       eof=^D          vtime=\0        vmin=\1         sxtc=\0
+       start=^Q        stop=^S         susp=^Z         eol=\0
+       reprint=^R      discard=^U      werase=^W       lnext=^V
+       eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE       0x001
+#define TIOCM_DTR      0x002
+#define TIOCM_RTS      0x004
+#define TIOCM_ST       0x008
+#define TIOCM_SR       0x010
+#define TIOCM_CTS      0x020
+#define TIOCM_CAR      0x040
+#define TIOCM_RNG      0x080
+#define TIOCM_DSR      0x100
+#define TIOCM_CD       TIOCM_CAR
+#define TIOCM_RI       TIOCM_RNG
+#define TIOCM_OUT1     0x2000
+#define TIOCM_OUT2     0x4000
+#define TIOCM_LOOP     0x8000
+
+#define TIOCM_MODEM_BITS       TIOCM_OUT2      /* IRDA support */
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+       unsigned short __tmp; \
+       get_user(__tmp, &(termio)->x); \
+       *(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+       SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+       SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+       SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+       SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+       copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+       put_user((termios)->c_iflag, &(termio)->c_iflag); \
+       put_user((termios)->c_oflag, &(termio)->c_oflag); \
+       put_user((termios)->c_cflag, &(termio)->c_cflag); \
+       put_user((termios)->c_lflag, &(termio)->c_lflag); \
+       put_user((termios)->c_line,  &(termio)->c_line); \
+       copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) \
+       copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) \
+       copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) \
+       copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) \
+       copy_to_user(u, k, sizeof(struct termios))
+
+#endif /* _ASM_TERMIOS_H */
diff --git a/include/asm-mn10300/thread_info.h b/include/asm-mn10300/thread_info.h
new file mode 100644 (file)
index 0000000..e397e71
--- /dev/null
@@ -0,0 +1,168 @@
+/* MN10300 Low-level thread information
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#endif
+
+#define PREEMPT_ACTIVE         0x10000000
+
+#ifdef CONFIG_4KSTACKS
+#define THREAD_SIZE            (4096)
+#else
+#define THREAD_SIZE            (8192)
+#endif
+
+#define STACK_WARN             (THREAD_SIZE / 8)
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ *   must also be changed
+ */
+#ifndef __ASSEMBLY__
+
+struct thread_info {
+       struct task_struct      *task;          /* main task structure */
+       struct exec_domain      *exec_domain;   /* execution domain */
+       unsigned long           flags;          /* low level flags */
+       __u32                   cpu;            /* current CPU */
+       __s32                   preempt_count;  /* 0 => preemptable, <0 => BUG */
+
+       mm_segment_t            addr_limit;     /* thread address space:
+                                                  0-0xBFFFFFFF for user-thead
+                                                  0-0xFFFFFFFF for kernel-thread
+                                               */
+       struct restart_block    restart_block;
+
+       __u8                    supervisor_stack[0];
+};
+
+#else /* !__ASSEMBLY__ */
+
+#ifndef __ASM_OFFSETS_H__
+#include <asm/asm-offsets.h>
+#endif
+
+#endif
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+
+#define INIT_THREAD_INFO(tsk)                  \
+{                                              \
+       .task           = &tsk,                 \
+       .exec_domain    = &default_exec_domain, \
+       .flags          = 0,                    \
+       .cpu            = 0,                    \
+       .preempt_count  = 1,                    \
+       .addr_limit     = KERNEL_DS,            \
+       .restart_block = {                      \
+               .fn = do_no_restart_syscall,    \
+       },                                      \
+}
+
+#define init_thread_info       (init_thread_union.thread_info)
+#define init_stack             (init_thread_union.stack)
+#define init_uregs                                                     \
+       ((struct pt_regs *)                                             \
+        ((unsigned long) init_stack + THREAD_SIZE - sizeof(struct pt_regs)))
+
+extern struct thread_info *__current_ti;
+
+/* how to get the thread information struct from C */
+static inline __attribute__((const))
+struct thread_info *current_thread_info(void)
+{
+       struct thread_info *ti;
+       asm("mov sp,%0\n"
+           "and %1,%0\n"
+           : "=d" (ti)
+           : "i" (~(THREAD_SIZE - 1))
+           : "cc");
+       return ti;
+}
+
+/* how to get the current stack pointer from C */
+static inline unsigned long current_stack_pointer(void)
+{
+       unsigned long sp;
+       asm("mov sp,%0; ":"=r" (sp));
+       return sp;
+}
+
+/* thread information allocation */
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk) kzalloc(THREAD_SIZE, GFP_KERNEL)
+#else
+#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+
+#define free_thread_info(ti)   kfree((ti))
+#define get_thread_info(ti)    get_task_struct((ti)->task)
+#define put_thread_info(ti)    put_task_struct((ti)->task)
+
+#else /* !__ASSEMBLY__ */
+
+#ifndef __VMLINUX_LDS__
+/* how to get the thread information struct from ASM */
+.macro GET_THREAD_INFO reg
+       mov     sp,\reg
+       and     -THREAD_SIZE,\reg
+.endm
+#endif
+#endif
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to
+ *   access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE      0       /* syscall trace active */
+#define TIF_NOTIFY_RESUME      1       /* resumption notification requested */
+#define TIF_SIGPENDING         2       /* signal pending */
+#define TIF_NEED_RESCHED       3       /* rescheduling necessary */
+#define TIF_SINGLESTEP         4       /* restore singlestep on return to user mode */
+#define TIF_RESTORE_SIGMASK    5       /* restore signal mask in do_signal() */
+#define TIF_POLLING_NRFLAG     16      /* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE             17      /* OOM killer killed process */
+#define TIF_FREEZE             18      /* freezing for suspend */
+
+#define _TIF_SYSCALL_TRACE     +(1 << TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME     +(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING                +(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED      +(1 << TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP                +(1 << TIF_SINGLESTEP)
+#define _TIF_RESTORE_SIGMASK   +(1 << TIF_RESTORE_SIGMASK)
+#define _TIF_POLLING_NRFLAG    +(1 << TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE            +(1 << TIF_FREEZE)
+
+#define _TIF_WORK_MASK         0x0000FFFE      /* work to do on interrupt/exception return */
+#define _TIF_ALLWORK_MASK      0x0000FFFF      /* work to do on any return to u-space */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-mn10300/timer-regs.h b/include/asm-mn10300/timer-regs.h
new file mode 100644 (file)
index 0000000..1d883b7
--- /dev/null
@@ -0,0 +1,293 @@
+/* AM33v2 on-board timer module registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TIMER_REGS_H
+#define _ASM_TIMER_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+/* timer prescalar control */
+#define        TMPSCNT                 __SYSREG(0xd4003071, u8) /* timer prescaler control */
+#define        TMPSCNT_ENABLE          0x80    /* timer prescaler enable */
+#define        TMPSCNT_DISABLE         0x00    /* timer prescaler disable */
+
+/* 8 bit timers */
+#define        TM0MD                   __SYSREG(0xd4003000, u8) /* timer 0 mode register */
+#define        TM0MD_SRC               0x07    /* timer source */
+#define        TM0MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define        TM0MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define        TM0MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define        TM0MD_SRC_TM2IO         0x03    /* - TM2IO pin input */
+#define        TM0MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define        TM0MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define        TM0MD_SRC_TM0IO         0x07    /* - TM0IO pin input */
+#define        TM0MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define        TM0MD_COUNT_ENABLE      0x80    /* timer count enable */
+
+#define        TM1MD                   __SYSREG(0xd4003001, u8) /* timer 1 mode register */
+#define        TM1MD_SRC               0x07    /* timer source */
+#define        TM1MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define        TM1MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define        TM1MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define        TM1MD_SRC_TM0CASCADE    0x03    /* - cascade with timer 0 */
+#define        TM1MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define        TM1MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define        TM1MD_SRC_TM1IO         0x07    /* - TM1IO pin input */
+#define        TM1MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define        TM1MD_COUNT_ENABLE      0x80    /* timer count enable */
+
+#define        TM2MD                   __SYSREG(0xd4003002, u8) /* timer 2 mode register */
+#define        TM2MD_SRC               0x07    /* timer source */
+#define        TM2MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define        TM2MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define        TM2MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define        TM2MD_SRC_TM1CASCADE    0x03    /* - cascade with timer 1 */
+#define        TM2MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define        TM2MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define        TM2MD_SRC_TM2IO         0x07    /* - TM2IO pin input */
+#define        TM2MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define        TM2MD_COUNT_ENABLE      0x80    /* timer count enable */
+
+#define        TM3MD                   __SYSREG(0xd4003003, u8) /* timer 3 mode register */
+#define        TM3MD_SRC               0x07    /* timer source */
+#define        TM3MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define        TM3MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define        TM3MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define        TM3MD_SRC_TM1CASCADE    0x03    /* - cascade with timer 2 */
+#define        TM3MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define        TM3MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define        TM3MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define        TM3MD_SRC_TM3IO         0x07    /* - TM3IO pin input */
+#define        TM3MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define        TM3MD_COUNT_ENABLE      0x80    /* timer count enable */
+
+#define        TM01MD                  __SYSREG(0xd4003000, u16)  /* timer 0:1 mode register */
+
+#define        TM0BR                   __SYSREG(0xd4003010, u8)   /* timer 0 base register */
+#define        TM1BR                   __SYSREG(0xd4003011, u8)   /* timer 1 base register */
+#define        TM2BR                   __SYSREG(0xd4003012, u8)   /* timer 2 base register */
+#define        TM3BR                   __SYSREG(0xd4003013, u8)   /* timer 3 base register */
+#define        TM01BR                  __SYSREG(0xd4003010, u16)  /* timer 0:1 base register */
+
+#define        TM0BC                   __SYSREGC(0xd4003020, u8)  /* timer 0 binary counter */
+#define        TM1BC                   __SYSREGC(0xd4003021, u8)  /* timer 1 binary counter */
+#define        TM2BC                   __SYSREGC(0xd4003022, u8)  /* timer 2 binary counter */
+#define        TM3BC                   __SYSREGC(0xd4003023, u8)  /* timer 3 binary counter */
+#define        TM01BC                  __SYSREGC(0xd4003020, u16) /* timer 0:1 binary counter */
+
+#define TM0IRQ                 2       /* timer 0 IRQ */
+#define TM1IRQ                 3       /* timer 1 IRQ */
+#define TM2IRQ                 4       /* timer 2 IRQ */
+#define TM3IRQ                 5       /* timer 3 IRQ */
+
+#define        TM0ICR                  GxICR(TM0IRQ)   /* timer 0 uflow intr ctrl reg */
+#define        TM1ICR                  GxICR(TM1IRQ)   /* timer 1 uflow intr ctrl reg */
+#define        TM2ICR                  GxICR(TM2IRQ)   /* timer 2 uflow intr ctrl reg */
+#define        TM3ICR                  GxICR(TM3IRQ)   /* timer 3 uflow intr ctrl reg */
+
+/* 16-bit timers 4,5 & 7-11 */
+#define        TM4MD                   __SYSREG(0xd4003080, u8)   /* timer 4 mode register */
+#define        TM4MD_SRC               0x07    /* timer source */
+#define        TM4MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define        TM4MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define        TM4MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define        TM4MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define        TM4MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define        TM4MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define        TM4MD_SRC_TM4IO         0x07    /* - TM4IO pin input */
+#define        TM4MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define        TM4MD_COUNT_ENABLE      0x80    /* timer count enable */
+
+#define        TM5MD                   __SYSREG(0xd4003082, u8)   /* timer 5 mode register */
+#define        TM5MD_SRC               0x07    /* timer source */
+#define        TM5MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define        TM5MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define        TM5MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define        TM5MD_SRC_TM4CASCADE    0x03    /* - cascade with timer 4 */
+#define        TM5MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define        TM5MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define        TM5MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define        TM5MD_SRC_TM5IO         0x07    /* - TM5IO pin input */
+#define        TM5MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define        TM5MD_COUNT_ENABLE      0x80    /* timer count enable */
+
+#define        TM7MD                   __SYSREG(0xd4003086, u8)   /* timer 7 mode register */
+#define        TM7MD_SRC               0x07    /* timer source */
+#define        TM7MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define        TM7MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define        TM7MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define        TM7MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define        TM7MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define        TM7MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define        TM7MD_SRC_TM7IO         0x07    /* - TM7IO pin input */
+#define        TM7MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define        TM7MD_COUNT_ENABLE      0x80    /* timer count enable */
+
+#define        TM8MD                   __SYSREG(0xd4003088, u8)   /* timer 8 mode register */
+#define        TM8MD_SRC               0x07    /* timer source */
+#define        TM8MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define        TM8MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define        TM8MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define        TM8MD_SRC_TM7CASCADE    0x03    /* - cascade with timer 7 */
+#define        TM8MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define        TM8MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define        TM8MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define        TM8MD_SRC_TM8IO         0x07    /* - TM8IO pin input */
+#define        TM8MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define        TM8MD_COUNT_ENABLE      0x80    /* timer count enable */
+
+#define        TM9MD                   __SYSREG(0xd400308a, u8)   /* timer 9 mode register */
+#define        TM9MD_SRC               0x07    /* timer source */
+#define        TM9MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define        TM9MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define        TM9MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define        TM9MD_SRC_TM8CASCADE    0x03    /* - cascade with timer 8 */
+#define        TM9MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define        TM9MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define        TM9MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define        TM9MD_SRC_TM9IO         0x07    /* - TM9IO pin input */
+#define        TM9MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define        TM9MD_COUNT_ENABLE      0x80    /* timer count enable */
+
+#define        TM10MD                  __SYSREG(0xd400308c, u8)   /* timer 10 mode register */
+#define        TM10MD_SRC              0x07    /* timer source */
+#define        TM10MD_SRC_IOCLK        0x00    /* - IOCLK */
+#define        TM10MD_SRC_IOCLK_8      0x01    /* - 1/8 IOCLK */
+#define        TM10MD_SRC_IOCLK_32     0x02    /* - 1/32 IOCLK */
+#define        TM10MD_SRC_TM9CASCADE   0x03    /* - cascade with timer 9 */
+#define        TM10MD_SRC_TM0UFLOW     0x04    /* - timer 0 underflow */
+#define        TM10MD_SRC_TM1UFLOW     0x05    /* - timer 1 underflow */
+#define        TM10MD_SRC_TM2UFLOW     0x06    /* - timer 2 underflow */
+#define        TM10MD_SRC_TM10IO       0x07    /* - TM10IO pin input */
+#define        TM10MD_INIT_COUNTER     0x40    /* initialize TMnBC = TMnBR */
+#define        TM10MD_COUNT_ENABLE     0x80    /* timer count enable */
+
+#define        TM11MD                  __SYSREG(0xd400308e, u8)   /* timer 11 mode register */
+#define        TM11MD_SRC              0x07    /* timer source */
+#define        TM11MD_SRC_IOCLK        0x00    /* - IOCLK */
+#define        TM11MD_SRC_IOCLK_8      0x01    /* - 1/8 IOCLK */
+#define        TM11MD_SRC_IOCLK_32     0x02    /* - 1/32 IOCLK */
+#define        TM11MD_SRC_TM7CASCADE   0x03    /* - cascade with timer 7 */
+#define        TM11MD_SRC_TM0UFLOW     0x04    /* - timer 0 underflow */
+#define        TM11MD_SRC_TM1UFLOW     0x05    /* - timer 1 underflow */
+#define        TM11MD_SRC_TM2UFLOW     0x06    /* - timer 2 underflow */
+#define        TM11MD_SRC_TM11IO       0x07    /* - TM11IO pin input */
+#define        TM11MD_INIT_COUNTER     0x40    /* initialize TMnBC = TMnBR */
+#define        TM11MD_COUNT_ENABLE     0x80    /* timer count enable */
+
+#define        TM4BR                   __SYSREG(0xd4003090, u16)  /* timer 4 base register */
+#define        TM5BR                   __SYSREG(0xd4003092, u16)  /* timer 5 base register */
+#define        TM7BR                   __SYSREG(0xd4003096, u16)  /* timer 7 base register */
+#define        TM8BR                   __SYSREG(0xd4003098, u16)  /* timer 8 base register */
+#define        TM9BR                   __SYSREG(0xd400309a, u16)  /* timer 9 base register */
+#define        TM10BR                  __SYSREG(0xd400309c, u16)  /* timer 10 base register */
+#define        TM11BR                  __SYSREG(0xd400309e, u16)  /* timer 11 base register */
+#define        TM45BR                  __SYSREG(0xd4003090, u32)  /* timer 4:5 base register */
+
+#define        TM4BC                   __SYSREG(0xd40030a0, u16)  /* timer 4 binary counter */
+#define        TM5BC                   __SYSREG(0xd40030a2, u16)  /* timer 5 binary counter */
+#define        TM45BC                  __SYSREG(0xd40030a0, u32)  /* timer 4:5 binary counter */
+
+#define        TM7BC                   __SYSREG(0xd40030a6, u16)  /* timer 7 binary counter */
+#define        TM8BC                   __SYSREG(0xd40030a8, u16)  /* timer 8 binary counter */
+#define        TM9BC                   __SYSREG(0xd40030aa, u16)  /* timer 9 binary counter */
+#define        TM10BC                  __SYSREG(0xd40030ac, u16)  /* timer 10 binary counter */
+#define        TM11BC                  __SYSREG(0xd40030ae, u16)  /* timer 11 binary counter */
+
+#define TM4IRQ                 6       /* timer 4 IRQ */
+#define TM5IRQ                 7       /* timer 5 IRQ */
+#define TM7IRQ                 11      /* timer 7 IRQ */
+#define TM8IRQ                 12      /* timer 8 IRQ */
+#define TM9IRQ                 13      /* timer 9 IRQ */
+#define TM10IRQ                        14      /* timer 10 IRQ */
+#define TM11IRQ                        15      /* timer 11 IRQ */
+
+#define        TM4ICR                  GxICR(TM4IRQ)   /* timer 4 uflow intr ctrl reg */
+#define        TM5ICR                  GxICR(TM5IRQ)   /* timer 5 uflow intr ctrl reg */
+#define        TM7ICR                  GxICR(TM7IRQ)   /* timer 7 uflow intr ctrl reg */
+#define        TM8ICR                  GxICR(TM8IRQ)   /* timer 8 uflow intr ctrl reg */
+#define        TM9ICR                  GxICR(TM9IRQ)   /* timer 9 uflow intr ctrl reg */
+#define        TM10ICR                 GxICR(TM10IRQ)  /* timer 10 uflow intr ctrl reg */
+#define        TM11ICR                 GxICR(TM11IRQ)  /* timer 11 uflow intr ctrl reg */
+
+/* 16-bit timer 6 */
+#define        TM6MD                   __SYSREG(0xd4003084, u16)  /* timer6 mode register */
+#define        TM6MD_SRC               0x0007  /* timer source */
+#define        TM6MD_SRC_IOCLK         0x0000  /* - IOCLK */
+#define        TM6MD_SRC_IOCLK_8       0x0001  /* - 1/8 IOCLK */
+#define        TM6MD_SRC_IOCLK_32      0x0002  /* - 1/32 IOCLK */
+#define        TM6MD_SRC_TM0UFLOW      0x0004  /* - timer 0 underflow */
+#define        TM6MD_SRC_TM1UFLOW      0x0005  /* - timer 1 underflow */
+#define        TM6MD_SRC_TM6IOB_BOTH   0x0006  /* - TM6IOB pin input (both edges) */
+#define        TM6MD_SRC_TM6IOB_SINGLE 0x0007  /* - TM6IOB pin input (single edge) */
+#define        TM6MD_CLR_ENABLE        0x0010  /* clear count enable */
+#define        TM6MD_ONESHOT_ENABLE    0x0040  /* oneshot count */
+#define        TM6MD_TRIG_ENABLE       0x0080  /* TM6IOB pin trigger enable */
+#define TM6MD_PWM              0x3800  /* PWM output mode */
+#define TM6MD_PWM_DIS          0x0000  /* - disabled */
+#define        TM6MD_PWM_10BIT         0x1000  /* - 10 bits mode */
+#define        TM6MD_PWM_11BIT         0x1800  /* - 11 bits mode */
+#define        TM6MD_PWM_12BIT         0x3000  /* - 12 bits mode */
+#define        TM6MD_PWM_14BIT         0x3800  /* - 14 bits mode */
+#define        TM6MD_INIT_COUNTER      0x4000  /* initialize TMnBC to zero */
+#define        TM6MD_COUNT_ENABLE      0x8000  /* timer count enable */
+
+#define        TM6MDA                  __SYSREG(0xd40030b4, u8)   /* timer6 cmp/cap A mode reg */
+#define TM6MDA_OUT             0x07    /* output select */
+#define        TM6MDA_OUT_SETA_RESETB  0x00    /* - set at match A, reset at match B */
+#define        TM6MDA_OUT_SETA_RESETOV 0x01    /* - set at match A, reset at overflow */
+#define        TM6MDA_OUT_SETA         0x02    /* - set at match A */
+#define        TM6MDA_OUT_RESETA       0x03    /* - reset at match A */
+#define        TM6MDA_OUT_TOGGLE       0x04    /* - toggle on match A */
+#define TM6MDA_MODE            0xc0    /* compare A register mode */
+#define        TM6MDA_MODE_CMP_SINGLE  0x00    /* - compare, single buffer mode */
+#define        TM6MDA_MODE_CMP_DOUBLE  0x40    /* - compare, double buffer mode */
+#define        TM6MDA_MODE_CAP_S_EDGE  0x80    /* - capture, single edge mode */
+#define        TM6MDA_MODE_CAP_D_EDGE  0xc0    /* - capture, double edge mode */
+#define TM6MDA_EDGE            0x20    /* compare A edge select */
+#define        TM6MDA_EDGE_FALLING     0x00    /* capture on falling edge */
+#define        TM6MDA_EDGE_RISING      0x20    /* capture on rising edge */
+#define        TM6MDA_CAPTURE_ENABLE   0x10    /* capture enable */
+
+#define        TM6MDB                  __SYSREG(0xd40030b5, u8)   /* timer6 cmp/cap B mode reg */
+#define TM6MDB_OUT             0x07    /* output select */
+#define        TM6MDB_OUT_SETB_RESETA  0x00    /* - set at match B, reset at match A */
+#define        TM6MDB_OUT_SETB_RESETOV 0x01    /* - set at match B */
+#define        TM6MDB_OUT_RESETB       0x03    /* - reset at match B */
+#define        TM6MDB_OUT_TOGGLE       0x04    /* - toggle on match B */
+#define TM6MDB_MODE            0xc0    /* compare B register mode */
+#define        TM6MDB_MODE_CMP_SINGLE  0x00    /* - compare, single buffer mode */
+#define        TM6MDB_MODE_CMP_DOUBLE  0x40    /* - compare, double buffer mode */
+#define        TM6MDB_MODE_CAP_S_EDGE  0x80    /* - capture, single edge mode */
+#define        TM6MDB_MODE_CAP_D_EDGE  0xc0    /* - capture, double edge mode */
+#define TM6MDB_EDGE            0x20    /* compare B edge select */
+#define        TM6MDB_EDGE_FALLING     0x00    /* capture on falling edge */
+#define        TM6MDB_EDGE_RISING      0x20    /* capture on rising edge */
+#define        TM6MDB_CAPTURE_ENABLE   0x10    /* capture enable */
+
+#define        TM6CA                   __SYSREG(0xd40030c4, u16)   /* timer6 cmp/capture reg A */
+#define        TM6CB                   __SYSREG(0xd40030d4, u16)   /* timer6 cmp/capture reg B */
+#define        TM6BC                   __SYSREG(0xd40030a4, u16)   /* timer6 binary counter */
+
+#define TM6IRQ                 6       /* timer 6 IRQ */
+#define TM6AIRQ                        9       /* timer 6A IRQ */
+#define TM6BIRQ                        10      /* timer 6B IRQ */
+
+#define        TM6ICR                  GxICR(TM6IRQ)   /* timer 6 uflow intr ctrl reg */
+#define        TM6AICR                 GxICR(TM6AIRQ)  /* timer 6A intr control reg */
+#define        TM6BICR                 GxICR(TM6BIRQ)  /* timer 6B intr control reg */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TIMER_REGS_H */
diff --git a/include/asm-mn10300/timex.h b/include/asm-mn10300/timex.h
new file mode 100644 (file)
index 0000000..3944277
--- /dev/null
@@ -0,0 +1,33 @@
+/* MN10300 Architecture time management specifications
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TIMEX_H
+#define _ASM_TIMEX_H
+
+#include <asm/hardirq.h>
+#include <asm/unit/timex.h>
+
+#define TICK_SIZE (tick_nsec / 1000)
+
+#define CLOCK_TICK_RATE 1193180 /* Underlying HZ - this should probably be set
+                                * to something appropriate, but what? */
+
+extern cycles_t cacheflush_time;
+
+#ifdef __KERNEL__
+
+static inline cycles_t get_cycles(void)
+{
+       return read_timestamp_counter();
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TIMEX_H */
diff --git a/include/asm-mn10300/tlb.h b/include/asm-mn10300/tlb.h
new file mode 100644 (file)
index 0000000..65d232b
--- /dev/null
@@ -0,0 +1,34 @@
+/* MN10300 TLB definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TLB_H
+#define _ASM_TLB_H
+
+#include <asm/tlbflush.h>
+
+extern void check_pgt_cache(void);
+
+/*
+ * we don't need any special per-pte or per-vma handling...
+ */
+#define tlb_start_vma(tlb, vma)                                do { } while (0)
+#define tlb_end_vma(tlb, vma)                          do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address)     do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it fills up
+ */
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+/* for now, just use the generic stuff */
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_TLB_H */
diff --git a/include/asm-mn10300/tlbflush.h b/include/asm-mn10300/tlbflush.h
new file mode 100644 (file)
index 0000000..e023986
--- /dev/null
@@ -0,0 +1,80 @@
+/* MN10300 TLB flushing functions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TLBFLUSH_H
+#define _ASM_TLBFLUSH_H
+
+#include <asm/processor.h>
+
+#define __flush_tlb()                                          \
+do {                                                           \
+       int w;                                                  \
+       __asm__ __volatile__                                    \
+               ("      mov %1,%0               \n"             \
+                "      or %2,%0                \n"             \
+                "      mov %0,%1               \n"             \
+                : "=d"(w)                                      \
+                : "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV)      \
+                : "memory"                                     \
+                );                                             \
+} while (0)
+
+#define __flush_tlb_all() __flush_tlb()
+#define __flush_tlb_one(addr) __flush_tlb()
+
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(mm, start, end) flushes a range of pages
+ *  - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
+ */
+#define flush_tlb_all()                                \
+do {                                           \
+       preempt_disable();                      \
+       __flush_tlb_all();                      \
+       preempt_enable();                       \
+} while (0)
+
+#define flush_tlb_mm(mm)                       \
+do {                                           \
+       preempt_disable();                      \
+       __flush_tlb_all();                      \
+       preempt_enable();                       \
+} while (0)
+
+#define flush_tlb_range(vma, start, end)                       \
+do {                                                           \
+       unsigned long __s __attribute__((unused)) = (start);    \
+       unsigned long __e __attribute__((unused)) = (end);      \
+       preempt_disable();                                      \
+       __flush_tlb_all();                                      \
+       preempt_enable();                                       \
+} while (0)
+
+
+#define __flush_tlb_global()                   flush_tlb_all()
+#define flush_tlb()                            flush_tlb_all()
+#define flush_tlb_kernel_range(start, end)                     \
+do {                                                           \
+       unsigned long __s __attribute__((unused)) = (start);    \
+       unsigned long __e __attribute__((unused)) = (end);      \
+       flush_tlb_all();                                        \
+} while (0)
+
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr);
+
+#define flush_tlb_pgtables(mm, start, end)     do {} while (0)
+
+#endif /* _ASM_TLBFLUSH_H */
diff --git a/include/asm-mn10300/topology.h b/include/asm-mn10300/topology.h
new file mode 100644 (file)
index 0000000..5428f33
--- /dev/null
@@ -0,0 +1 @@
+#include <asm-generic/topology.h>
diff --git a/include/asm-mn10300/types.h b/include/asm-mn10300/types.h
new file mode 100644 (file)
index 0000000..d40ea76
--- /dev/null
@@ -0,0 +1,67 @@
+/* MN10300 Basic type definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TYPES_H
+#define _ASM_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+/* Dma addresses are 32-bits wide.  */
+typedef u32 dma_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TYPES_H */
diff --git a/include/asm-mn10300/uaccess.h b/include/asm-mn10300/uaccess.h
new file mode 100644 (file)
index 0000000..46b9b64
--- /dev/null
@@ -0,0 +1,490 @@
+/* MN10300 userspace access functions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/errno.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
+
+#define KERNEL_XDS     MAKE_MM_SEG(0xBFFFFFFF)
+#define KERNEL_DS      MAKE_MM_SEG(0x9FFFFFFF)
+#define USER_DS                MAKE_MM_SEG(TASK_SIZE)
+
+#define get_ds()       (KERNEL_DS)
+#define get_fs()       (current_thread_info()->addr_limit)
+#define set_fs(x)      (current_thread_info()->addr_limit = (x))
+#define __kernel_ds_p() (current_thread_info()->addr_limit.seg == 0x9FFFFFFF)
+
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+#define __addr_ok(addr) \
+       ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
+
+/*
+ * check that a range of addresses falls within the current address limit
+ */
+static inline int ___range_ok(unsigned long addr, unsigned int size)
+{
+       int flag = 1, tmp;
+
+       asm("   add     %3,%1   \n"     /* set C-flag if addr + size > 4Gb */
+           "   bcs     0f      \n"
+           "   cmp     %4,%1   \n"     /* jump if addr+size>limit (error) */
+           "   bhi     0f      \n"
+           "   clr     %0      \n"     /* mark okay */
+           "0:                 \n"
+           : "=r"(flag), "=&r"(tmp)
+           : "1"(addr), "ir"(size),
+             "r"(current_thread_info()->addr_limit.seg), "0"(flag)
+           : "cc"
+           );
+
+       return flag;
+}
+
+#define __range_ok(addr, size) ___range_ok((unsigned long)(addr), (u32)(size))
+
+#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
+#define __access_ok(addr, size)     (__range_ok((addr), (size)) == 0)
+
+static inline int verify_area(int type, const void *addr, unsigned long size)
+{
+       return access_ok(type, addr, size) ? 0 : -EFAULT;
+}
+
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+       unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern int fixup_exception(struct pt_regs *regs);
+
+#define put_user(x, ptr) __put_user_check((x), (ptr), sizeof(*(ptr)))
+#define get_user(x, ptr) __get_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x, ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __get_user(x, ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * The "xxx_ret" versions return constant specified in third argument, if
+ * something bad happens. These macros can be optimized for the
+ * case of just returning from the function xxx_ret is used.
+ */
+
+#define put_user_ret(x, ptr, ret) \
+       ({ if (put_user((x), (ptr)))    return (ret); })
+#define get_user_ret(x, ptr, ret) \
+       ({ if (get_user((x), (ptr)))    return (ret); })
+#define __put_user_ret(x, ptr, ret) \
+       ({ if (__put_user((x), (ptr)))  return (ret); })
+#define __get_user_ret(x, ptr, ret) \
+       ({ if (__get_user((x), (ptr)))  return (ret); })
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct *)(x))
+
+#define __get_user_nocheck(x, ptr, size)       \
+({                                             \
+       __typeof(*(ptr)) __gu_val;              \
+       unsigned long __gu_addr;                \
+       int __gu_err;                           \
+       __gu_addr = (unsigned long) (ptr);      \
+       switch (size) {                         \
+       case 1:  __get_user_asm("bu"); break;   \
+       case 2:  __get_user_asm("hu"); break;   \
+       case 4:  __get_user_asm(""  ); break;   \
+       default: __get_user_unknown(); break;   \
+       }                                       \
+       x = (__typeof__(*(ptr))) __gu_val;      \
+       __gu_err;                               \
+})
+
+#define __get_user_check(x, ptr, size)                 \
+({                                                     \
+       __typeof__(*(ptr)) __gu_val;                    \
+       unsigned long __gu_addr;                        \
+       int __gu_err;                                   \
+       __gu_addr = (unsigned long) (ptr);              \
+       if (likely(__access_ok(__gu_addr,size))) {      \
+               switch (size) {                         \
+               case 1:  __get_user_asm("bu"); break;   \
+               case 2:  __get_user_asm("hu"); break;   \
+               case 4:  __get_user_asm(""  ); break;   \
+               default: __get_user_unknown(); break;   \
+               }                                       \
+       }                                               \
+       else {                                          \
+               __gu_err = -EFAULT;                     \
+               __gu_val = 0;                           \
+       }                                               \
+       x = (__typeof__(*(ptr))) __gu_val;              \
+       __gu_err;                                       \
+})
+
+#define __get_user_asm(INSN)                                   \
+({                                                             \
+       asm volatile(                                   \
+               "1:\n"                                          \
+               "       mov"INSN"       %2,%1\n"                \
+               "       mov             0,%0\n"                 \
+               "2:\n"                                          \
+               "       .section        .fixup,\"ax\"\n"        \
+               "3:\n\t"                                        \
+               "       mov             %3,%0\n"                \
+               "       jmp             2b\n"                   \
+               "       .previous\n"                            \
+               "       .section        __ex_table,\"a\"\n"     \
+               "       .balign         4\n"                    \
+               "       .long           1b, 3b\n"               \
+               "       .previous"                              \
+               : "=&r" (__gu_err), "=&r" (__gu_val)            \
+               : "m" (__m(__gu_addr)), "i" (-EFAULT));         \
+})
+
+extern int __get_user_unknown(void);
+
+#define __put_user_nocheck(x, ptr, size)                       \
+({                                                             \
+       union {                                                 \
+               __typeof__(*(ptr)) val;                         \
+               u32 bits[2];                                    \
+       } __pu_val;                                             \
+       unsigned long __pu_addr;                                \
+       int __pu_err;                                           \
+       __pu_val.val = (x);                                     \
+       __pu_addr = (unsigned long) (ptr);                      \
+       switch (size) {                                         \
+       case 1:  __put_user_asm("bu"); break;                   \
+       case 2:  __put_user_asm("hu"); break;                   \
+       case 4:  __put_user_asm(""  ); break;                   \
+       case 8:  __put_user_asm8();    break;                   \
+       default: __pu_err = __put_user_unknown(); break;        \
+       }                                                       \
+       __pu_err;                                               \
+})
+
+#define __put_user_check(x, ptr, size)                                 \
+({                                                                     \
+       union {                                                         \
+               __typeof__(*(ptr)) val;                                 \
+               u32 bits[2];                                            \
+       } __pu_val;                                                     \
+       unsigned long __pu_addr;                                        \
+       int __pu_err;                                                   \
+       __pu_val.val = (x);                                             \
+       __pu_addr = (unsigned long) (ptr);                              \
+       if (likely(__access_ok(__pu_addr, size))) {                     \
+               switch (size) {                                         \
+               case 1:  __put_user_asm("bu"); break;                   \
+               case 2:  __put_user_asm("hu"); break;                   \
+               case 4:  __put_user_asm(""  ); break;                   \
+               case 8:  __put_user_asm8();    break;                   \
+               default: __pu_err = __put_user_unknown(); break;        \
+               }                                                       \
+       }                                                               \
+       else {                                                          \
+               __pu_err = -EFAULT;                                     \
+       }                                                               \
+       __pu_err;                                                       \
+})
+
+#define __put_user_asm(INSN)                                   \
+({                                                             \
+       asm volatile(                                           \
+               "1:\n"                                          \
+               "       mov"INSN"       %1,%2\n"                \
+               "       mov             0,%0\n"                 \
+               "2:\n"                                          \
+               "       .section        .fixup,\"ax\"\n"        \
+               "3:\n"                                          \
+               "       mov             %3,%0\n"                \
+               "       jmp             2b\n"                   \
+               "       .previous\n"                            \
+               "       .section        __ex_table,\"a\"\n"     \
+               "       .balign         4\n"                    \
+               "       .long           1b, 3b\n"               \
+               "       .previous"                              \
+               : "=&r" (__pu_err)                              \
+               : "r" (__pu_val.val), "m" (__m(__pu_addr)),     \
+                 "i" (-EFAULT)                                 \
+               );                                              \
+})
+
+#define __put_user_asm8()                                              \
+({                                                                     \
+       asm volatile(                                                   \
+               "1:     mov             %1,%3           \n"             \
+               "2:     mov             %2,%4           \n"             \
+               "       mov             0,%0            \n"             \
+               "3:                                     \n"             \
+               "       .section        .fixup,\"ax\"   \n"             \
+               "4:                                     \n"             \
+               "       mov             %5,%0           \n"             \
+               "       jmp             2b              \n"             \
+               "       .previous                       \n"             \
+               "       .section        __ex_table,\"a\"\n"             \
+               "       .balign         4               \n"             \
+               "       .long           1b, 4b          \n"             \
+               "       .long           2b, 4b          \n"             \
+               "       .previous                       \n"             \
+               : "=&r" (__pu_err)                                      \
+               : "r" (__pu_val.bits[0]), "r" (__pu_val.bits[1]),       \
+                 "m" (__m(__pu_addr)), "m" (__m(__pu_addr+4)),         \
+                 "i" (-EFAULT)                                         \
+               );                                                      \
+})
+
+extern int __put_user_unknown(void);
+
+
+/*
+ * Copy To/From Userspace
+ */
+/* Generic arbitrary sized copy.  */
+#define __copy_user(to, from, size)                                    \
+do {                                                                   \
+       if (size) {                                                     \
+               void *__to = to;                                        \
+               const void *__from = from;                              \
+               int w;                                                  \
+               asm volatile(                                           \
+                       "0:     movbu   (%0),%3;\n"                     \
+                       "1:     movbu   %3,(%1);\n"                     \
+                       "       inc     %0;\n"                          \
+                       "       inc     %1;\n"                          \
+                       "       add     -1,%2;\n"                       \
+                       "       bne     0b;\n"                          \
+                       "2:\n"                                          \
+                       "       .section .fixup,\"ax\"\n"               \
+                       "3:     jmp     2b\n"                           \
+                       "       .previous\n"                            \
+                       "       .section __ex_table,\"a\"\n"            \
+                       "       .balign 4\n"                            \
+                       "       .long   0b,3b\n"                        \
+                       "       .long   1b,3b\n"                        \
+                       "       .previous\n"                            \
+                       : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\
+                       : "0"(__from), "1"(__to), "2"(size)             \
+                       : "memory");                                    \
+       }                                                               \
+} while (0)
+
+#define __copy_user_zeroing(to, from, size)                            \
+do {                                                                   \
+       if (size) {                                                     \
+               void *__to = to;                                        \
+               const void *__from = from;                              \
+               int w;                                                  \
+               asm volatile(                                           \
+                       "0:     movbu   (%0),%3;\n"                     \
+                       "1:     movbu   %3,(%1);\n"                     \
+                       "       inc     %0;\n"                          \
+                       "       inc     %1;\n"                          \
+                       "       add     -1,%2;\n"                       \
+                       "       bne     0b;\n"                          \
+                       "2:\n"                                          \
+                       "       .section .fixup,\"ax\"\n"               \
+                       "3:\n"                                          \
+                       "       mov     %2,%0\n"                        \
+                       "       clr     %3\n"                           \
+                       "4:     movbu   %3,(%1);\n"                     \
+                       "       inc     %1;\n"                          \
+                       "       add     -1,%2;\n"                       \
+                       "       bne     4b;\n"                          \
+                       "       mov     %0,%2\n"                        \
+                       "       jmp     2b\n"                           \
+                       "       .previous\n"                            \
+                       "       .section __ex_table,\"a\"\n"            \
+                       "       .balign 4\n"                            \
+                       "       .long   0b,3b\n"                        \
+                       "       .long   1b,3b\n"                        \
+                       "       .previous\n"                            \
+                       : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\
+                       : "0"(__from), "1"(__to), "2"(size)             \
+                       : "memory");                                    \
+       }                                                               \
+} while (0)
+
+/* We let the __ versions of copy_from/to_user inline, because they're often
+ * used in fast paths and have only a small space overhead.
+ */
+static inline
+unsigned long __generic_copy_from_user_nocheck(void *to, const void *from,
+                                              unsigned long n)
+{
+       __copy_user_zeroing(to, from, n);
+       return n;
+}
+
+static inline
+unsigned long __generic_copy_to_user_nocheck(void *to, const void *from,
+                                            unsigned long n)
+{
+       __copy_user(to, from, n);
+       return n;
+}
+
+
+#if 0
+#error don't use - these macros don't increment to & from pointers
+/* Optimize just a little bit when we know the size of the move. */
+#define __constant_copy_user(to, from, size)   \
+do {                                           \
+       asm volatile(                           \
+               "       mov %0,a0;\n"           \
+               "0:     movbu (%1),d3;\n"       \
+               "1:     movbu d3,(%2);\n"       \
+               "       add -1,a0;\n"           \
+               "       bne 0b;\n"              \
+               "2:;"                           \
+               ".section .fixup,\"ax\"\n"      \
+               "3:     jmp 2b\n"               \
+               ".previous\n"                   \
+               ".section __ex_table,\"a\"\n"   \
+               "       .balign 4\n"            \
+               "       .long 0b,3b\n"          \
+               "       .long 1b,3b\n"          \
+               ".previous"                     \
+               :                               \
+               : "d"(size), "d"(to), "d"(from) \
+               : "d3", "a0");                  \
+} while (0)
+
+/* Optimize just a little bit when we know the size of the move. */
+#define __constant_copy_user_zeroing(to, from, size)   \
+do {                                                   \
+       asm volatile(                                   \
+               "       mov %0,a0;\n"                   \
+               "0:     movbu (%1),d3;\n"               \
+               "1:     movbu d3,(%2);\n"               \
+               "       add -1,a0;\n"                   \
+               "       bne 0b;\n"                      \
+               "2:;"                                   \
+               ".section .fixup,\"ax\"\n"              \
+               "3:     jmp 2b\n"                       \
+               ".previous\n"                           \
+               ".section __ex_table,\"a\"\n"           \
+               "       .balign 4\n"                    \
+               "       .long 0b,3b\n"                  \
+               "       .long 1b,3b\n"                  \
+               ".previous"                             \
+               :                                       \
+               : "d"(size), "d"(to), "d"(from)         \
+               : "d3", "a0");                          \
+} while (0)
+
+static inline
+unsigned long __constant_copy_to_user(void *to, const void *from,
+                                     unsigned long n)
+{
+       if (access_ok(VERIFY_WRITE, to, n))
+               __constant_copy_user(to, from, n);
+       return n;
+}
+
+static inline
+unsigned long __constant_copy_from_user(void *to, const void *from,
+                                       unsigned long n)
+{
+       if (access_ok(VERIFY_READ, from, n))
+               __constant_copy_user_zeroing(to, from, n);
+       return n;
+}
+
+static inline
+unsigned long __constant_copy_to_user_nocheck(void *to, const void *from,
+                                             unsigned long n)
+{
+       __constant_copy_user(to, from, n);
+       return n;
+}
+
+static inline
+unsigned long __constant_copy_from_user_nocheck(void *to, const void *from,
+                                               unsigned long n)
+{
+       __constant_copy_user_zeroing(to, from, n);
+       return n;
+}
+#endif
+
+extern unsigned long __generic_copy_to_user(void __user *, const void *,
+                                           unsigned long);
+extern unsigned long __generic_copy_from_user(void *, const void __user *,
+                                             unsigned long);
+
+#define __copy_to_user_inatomic(to, from, n) \
+       __generic_copy_to_user_nocheck((to), (from), (n))
+#define __copy_from_user_inatomic(to, from, n) \
+       __generic_copy_from_user_nocheck((to), (from), (n))
+
+#define __copy_to_user(to, from, n)                    \
+({                                                     \
+       might_sleep();                                  \
+       __copy_to_user_inatomic((to), (from), (n));     \
+})
+
+#define __copy_from_user(to, from, n)                  \
+({                                                     \
+       might_sleep();                                  \
+       __copy_from_user_inatomic((to), (from), (n));   \
+})
+
+
+#define copy_to_user(to, from, n)   __generic_copy_to_user((to), (from), (n))
+#define copy_from_user(to, from, n) __generic_copy_from_user((to), (from), (n))
+
+extern long strncpy_from_user(char *dst, const char __user *src, long count);
+extern long __strncpy_from_user(char *dst, const char __user *src, long count);
+extern long strnlen_user(const char __user *str, long n);
+#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
+extern unsigned long clear_user(void __user *mem, unsigned long len);
+extern unsigned long __clear_user(void __user *mem, unsigned long len);
+
+#endif /* _ASM_UACCESS_H */
diff --git a/include/asm-mn10300/ucontext.h b/include/asm-mn10300/ucontext.h
new file mode 100644 (file)
index 0000000..fcab5c1
--- /dev/null
@@ -0,0 +1,22 @@
+/* MN10300 User context
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UCONTEXT_H
+#define _ASM_UCONTEXT_H
+
+struct ucontext {
+       unsigned long     uc_flags;
+       struct ucontext  *uc_link;
+       stack_t           uc_stack;
+       struct sigcontext uc_mcontext;
+       sigset_t          uc_sigmask;   /* mask last for extensibility */
+};
+
+#endif /* _ASM_UCONTEXT_H */
diff --git a/include/asm-mn10300/unaligned.h b/include/asm-mn10300/unaligned.h
new file mode 100644 (file)
index 0000000..cad3afb
--- /dev/null
@@ -0,0 +1,136 @@
+/* MN10300 Unaligned memory access handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNALIGNED_H
+#define _ASM_UNALIGNED_H
+
+#include <asm/types.h>
+
+#if 0
+extern int __bug_unaligned_x(void *ptr);
+
+/*
+ * What is the most efficient way of loading/storing an unaligned value?
+ *
+ * That is the subject of this file.  Efficiency here is defined as
+ * minimum code size with minimum register usage for the common cases.
+ * It is currently not believed that long longs are common, so we
+ * trade efficiency for the chars, shorts and longs against the long
+ * longs.
+ *
+ * Current stats with gcc 2.7.2.2 for these functions:
+ *
+ *     ptrsize get:    code    regs    put:    code    regs
+ *     1               1       1               1       2
+ *     2               3       2               3       2
+ *     4               7       3               7       3
+ *     8               20      6               16      6
+ *
+ * gcc 2.95.1 seems to code differently:
+ *
+ *     ptrsize get:    code    regs    put:    code    regs
+ *     1               1       1               1       2
+ *     2               3       2               3       2
+ *     4               7       4               7       4
+ *     8               19      8               15      6
+ *
+ * which may or may not be more efficient (depending upon whether
+ * you can afford the extra registers).  Hopefully the gcc 2.95
+ * is inteligent enough to decide if it is better to use the
+ * extra register, but evidence so far seems to suggest otherwise.
+ *
+ * Unfortunately, gcc is not able to optimise the high word
+ * out of long long >> 32, or the low word from long long << 32
+ */
+
+#define __get_unaligned_2(__p)                                 \
+       (__p[0] | __p[1] << 8)
+
+#define __get_unaligned_4(__p)                                 \
+       (__p[0] | __p[1] << 8 | __p[2] << 16 | __p[3] << 24)
+
+#define get_unaligned(ptr)                                     \
+({                                                             \
+       unsigned int __v1, __v2;                                \
+       __typeof__(*(ptr)) __v;                                 \
+       __u8 *__p = (__u8 *)(ptr);                              \
+                                                               \
+       switch (sizeof(*(ptr))) {                               \
+       case 1: __v = *(ptr);                   break;          \
+       case 2: __v = __get_unaligned_2(__p);   break;          \
+       case 4: __v = __get_unaligned_4(__p);   break;          \
+       case 8:                                                 \
+               __v2 = __get_unaligned_4((__p+4));              \
+               __v1 = __get_unaligned_4(__p);                  \
+               __v = ((unsigned long long)__v2 << 32 | __v1);  \
+               break;                                          \
+       default: __v = __bug_unaligned_x(__p);  break;          \
+       }                                                       \
+       __v;                                                    \
+})
+
+
+static inline void __put_unaligned_2(__u32 __v, register __u8 *__p)
+{
+       *__p++ = __v;
+       *__p++ = __v >> 8;
+}
+
+static inline void __put_unaligned_4(__u32 __v, register __u8 *__p)
+{
+       __put_unaligned_2(__v >> 16, __p + 2);
+       __put_unaligned_2(__v, __p);
+}
+
+static inline void __put_unaligned_8(const unsigned long long __v, __u8 *__p)
+{
+       /*
+        * tradeoff: 8 bytes of stack for all unaligned puts (2
+        * instructions), or an extra register in the long long
+        * case - go for the extra register.
+        */
+       __put_unaligned_4(__v >> 32, __p + 4);
+       __put_unaligned_4(__v, __p);
+}
+
+/*
+ * Try to store an unaligned value as efficiently as possible.
+ */
+#define put_unaligned(val, ptr)                                                \
+       ({                                                              \
+               switch (sizeof(*(ptr))) {                               \
+               case 1:                                                 \
+                       *(ptr) = (val);                                 \
+                       break;                                          \
+               case 2:                                                 \
+                       __put_unaligned_2((val), (__u8 *)(ptr));        \
+                       break;                                          \
+               case 4:                                                 \
+                       __put_unaligned_4((val), (__u8 *)(ptr));        \
+                       break;                                          \
+               case 8:                                                 \
+                       __put_unaligned_8((val), (__u8 *)(ptr));        \
+                       break;                                          \
+               default:                                                \
+                       __bug_unaligned_x(ptr);                         \
+                       break;                                          \
+               }                                                       \
+               (void) 0;                                               \
+       })
+
+
+#else
+
+#define get_unaligned(ptr) (*(ptr))
+#define put_unaligned(val, ptr) ({ *(ptr) = (val); (void) 0; })
+
+#endif
+
+#endif
diff --git a/include/asm-mn10300/unistd.h b/include/asm-mn10300/unistd.h
new file mode 100644 (file)
index 0000000..3721aa9
--- /dev/null
@@ -0,0 +1,384 @@
+/* MN10300 System call number list
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNISTD_H
+#define _ASM_UNISTD_H
+
+#define __NR_restart_syscall      0
+#define __NR_exit                1
+#define __NR_fork                2
+#define __NR_read                3
+#define __NR_write               4
+#define __NR_open                5
+#define __NR_close               6
+#define __NR_waitpid             7
+#define __NR_creat               8
+#define __NR_link                9
+#define __NR_unlink             10
+#define __NR_execve             11
+#define __NR_chdir              12
+#define __NR_time               13
+#define __NR_mknod              14
+#define __NR_chmod              15
+#define __NR_lchown             16
+#define __NR_break              17
+#define __NR_oldstat            18
+#define __NR_lseek              19
+#define __NR_getpid             20
+#define __NR_mount              21
+#define __NR_umount             22
+#define __NR_setuid             23
+#define __NR_getuid             24
+#define __NR_stime              25
+#define __NR_ptrace             26
+#define __NR_alarm              27
+#define __NR_oldfstat           28
+#define __NR_pause              29
+#define __NR_utime              30
+#define __NR_stty               31
+#define __NR_gtty               32
+#define __NR_access             33
+#define __NR_nice               34
+#define __NR_ftime              35
+#define __NR_sync               36
+#define __NR_kill               37
+#define __NR_rename             38
+#define __NR_mkdir              39
+#define __NR_rmdir              40
+#define __NR_dup                41
+#define __NR_pipe               42
+#define __NR_times              43
+#define __NR_prof               44
+#define __NR_brk                45
+#define __NR_setgid             46
+#define __NR_getgid             47
+#define __NR_signal             48
+#define __NR_geteuid            49
+#define __NR_getegid            50
+#define __NR_acct               51
+#define __NR_umount2            52
+#define __NR_lock               53
+#define __NR_ioctl              54
+#define __NR_fcntl              55
+#define __NR_mpx                56
+#define __NR_setpgid            57
+#define __NR_ulimit             58
+#define __NR_oldolduname        59
+#define __NR_umask              60
+#define __NR_chroot             61
+#define __NR_ustat              62
+#define __NR_dup2               63
+#define __NR_getppid            64
+#define __NR_getpgrp            65
+#define __NR_setsid             66
+#define __NR_sigaction          67
+#define __NR_sgetmask           68
+#define __NR_ssetmask           69
+#define __NR_setreuid           70
+#define __NR_setregid           71
+#define __NR_sigsuspend                 72
+#define __NR_sigpending                 73
+#define __NR_sethostname        74
+#define __NR_setrlimit          75
+#define __NR_getrlimit          76     /* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage          77
+#define __NR_gettimeofday       78
+#define __NR_settimeofday       79
+#define __NR_getgroups          80
+#define __NR_setgroups          81
+#define __NR_select             82
+#define __NR_symlink            83
+#define __NR_oldlstat           84
+#define __NR_readlink           85
+#define __NR_uselib             86
+#define __NR_swapon             87
+#define __NR_reboot             88
+#define __NR_readdir            89
+#define __NR_mmap               90
+#define __NR_munmap             91
+#define __NR_truncate           92
+#define __NR_ftruncate          93
+#define __NR_fchmod             94
+#define __NR_fchown             95
+#define __NR_getpriority        96
+#define __NR_setpriority        97
+#define __NR_profil             98
+#define __NR_statfs             99
+#define __NR_fstatfs           100
+#define __NR_ioperm            101
+#define __NR_socketcall                102
+#define __NR_syslog            103
+#define __NR_setitimer         104
+#define __NR_getitimer         105
+#define __NR_stat              106
+#define __NR_lstat             107
+#define __NR_fstat             108
+#define __NR_olduname          109
+#define __NR_iopl              110
+#define __NR_vhangup           111
+#define __NR_idle              112
+#define __NR_vm86old           113
+#define __NR_wait4             114
+#define __NR_swapoff           115
+#define __NR_sysinfo           116
+#define __NR_ipc               117
+#define __NR_fsync             118
+#define __NR_sigreturn         119
+#define __NR_clone             120
+#define __NR_setdomainname     121
+#define __NR_uname             122
+#define __NR_modify_ldt                123
+#define __NR_adjtimex          124
+#define __NR_mprotect          125
+#define __NR_sigprocmask       126
+#define __NR_create_module     127
+#define __NR_init_module       128
+#define __NR_delete_module     129
+#define __NR_get_kernel_syms   130
+#define __NR_quotactl          131
+#define __NR_getpgid           132
+#define __NR_fchdir            133
+#define __NR_bdflush           134
+#define __NR_sysfs             135
+#define __NR_personality       136
+#define __NR_afs_syscall       137 /* Syscall for Andrew File System */
+#define __NR_setfsuid          138
+#define __NR_setfsgid          139
+#define __NR__llseek           140
+#define __NR_getdents          141
+#define __NR__newselect                142
+#define __NR_flock             143
+#define __NR_msync             144
+#define __NR_readv             145
+#define __NR_writev            146
+#define __NR_getsid            147
+#define __NR_fdatasync         148
+#define __NR__sysctl           149
+#define __NR_mlock             150
+#define __NR_munlock           151
+#define __NR_mlockall          152
+#define __NR_munlockall                153
+#define __NR_sched_setparam            154
+#define __NR_sched_getparam            155
+#define __NR_sched_setscheduler                156
+#define __NR_sched_getscheduler                157
+#define __NR_sched_yield               158
+#define __NR_sched_get_priority_max    159
+#define __NR_sched_get_priority_min    160
+#define __NR_sched_rr_get_interval     161
+#define __NR_nanosleep         162
+#define __NR_mremap            163
+#define __NR_setresuid         164
+#define __NR_getresuid         165
+#define __NR_vm86              166
+#define __NR_query_module      167
+#define __NR_poll              168
+#define __NR_nfsservctl                169
+#define __NR_setresgid         170
+#define __NR_getresgid         171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn      173
+#define __NR_rt_sigaction      174
+#define __NR_rt_sigprocmask    175
+#define __NR_rt_sigpending     176
+#define __NR_rt_sigtimedwait   177
+#define __NR_rt_sigqueueinfo   178
+#define __NR_rt_sigsuspend     179
+#define __NR_pread64           180
+#define __NR_pwrite64          181
+#define __NR_chown             182
+#define __NR_getcwd            183
+#define __NR_capget            184
+#define __NR_capset            185
+#define __NR_sigaltstack       186
+#define __NR_sendfile          187
+#define __NR_getpmsg           188     /* some people actually want streams */
+#define __NR_putpmsg           189     /* some people actually want streams */
+#define __NR_vfork             190
+#define __NR_ugetrlimit                191     /* SuS compliant getrlimit */
+#define __NR_mmap2             192
+#define __NR_truncate64                193
+#define __NR_ftruncate64       194
+#define __NR_stat64            195
+#define __NR_lstat64           196
+#define __NR_fstat64           197
+#define __NR_lchown32          198
+#define __NR_getuid32          199
+#define __NR_getgid32          200
+#define __NR_geteuid32         201
+#define __NR_getegid32         202
+#define __NR_setreuid32                203
+#define __NR_setregid32                204
+#define __NR_getgroups32       205
+#define __NR_setgroups32       206
+#define __NR_fchown32          207
+#define __NR_setresuid32       208
+#define __NR_getresuid32       209
+#define __NR_setresgid32       210
+#define __NR_getresgid32       211
+#define __NR_chown32           212
+#define __NR_setuid32          213
+#define __NR_setgid32          214
+#define __NR_setfsuid32                215
+#define __NR_setfsgid32                216
+#define __NR_pivot_root                217
+#define __NR_mincore           218
+#define __NR_madvise           219
+#define __NR_madvise1          219     /* delete when C lib stub is removed */
+#define __NR_getdents64                220
+#define __NR_fcntl64           221
+/* 223 is unused */
+#define __NR_gettid            224
+#define __NR_readahead         225
+#define __NR_setxattr          226
+#define __NR_lsetxattr         227
+#define __NR_fsetxattr         228
+#define __NR_getxattr          229
+#define __NR_lgetxattr         230
+#define __NR_fgetxattr         231
+#define __NR_listxattr         232
+#define __NR_llistxattr                233
+#define __NR_flistxattr                234
+#define __NR_removexattr       235
+#define __NR_lremovexattr      236
+#define __NR_fremovexattr      237
+#define __NR_tkill             238
+#define __NR_sendfile64                239
+#define __NR_futex             240
+#define __NR_sched_setaffinity 241
+#define __NR_sched_getaffinity 242
+#define __NR_set_thread_area   243
+#define __NR_get_thread_area   244
+#define __NR_io_setup          245
+#define __NR_io_destroy                246
+#define __NR_io_getevents      247
+#define __NR_io_submit         248
+#define __NR_io_cancel         249
+#define __NR_fadvise64         250
+
+#define __NR_exit_group                252
+#define __NR_lookup_dcookie    253
+#define __NR_epoll_create      254
+#define __NR_epoll_ctl         255
+#define __NR_epoll_wait                256
+#define __NR_remap_file_pages  257
+#define __NR_set_tid_address   258
+#define __NR_timer_create      259
+#define __NR_timer_settime     (__NR_timer_create+1)
+#define __NR_timer_gettime     (__NR_timer_create+2)
+#define __NR_timer_getoverrun  (__NR_timer_create+3)
+#define __NR_timer_delete      (__NR_timer_create+4)
+#define __NR_clock_settime     (__NR_timer_create+5)
+#define __NR_clock_gettime     (__NR_timer_create+6)
+#define __NR_clock_getres      (__NR_timer_create+7)
+#define __NR_clock_nanosleep   (__NR_timer_create+8)
+#define __NR_statfs64          268
+#define __NR_fstatfs64         269
+#define __NR_tgkill            270
+#define __NR_utimes            271
+#define __NR_fadvise64_64      272
+#define __NR_vserver           273
+#define __NR_mbind             274
+#define __NR_get_mempolicy     275
+#define __NR_set_mempolicy     276
+#define __NR_mq_open           277
+#define __NR_mq_unlink         (__NR_mq_open+1)
+#define __NR_mq_timedsend      (__NR_mq_open+2)
+#define __NR_mq_timedreceive   (__NR_mq_open+3)
+#define __NR_mq_notify         (__NR_mq_open+4)
+#define __NR_mq_getsetattr     (__NR_mq_open+5)
+#define __NR_kexec_load                283
+#define __NR_waitid            284
+#define __NR_add_key           286
+#define __NR_request_key       287
+#define __NR_keyctl            288
+#define __NR_cacheflush                289
+#define __NR_ioprio_set                290
+#define __NR_ioprio_get                291
+#define __NR_inotify_init      292
+#define __NR_inotify_add_watch 293
+#define __NR_inotify_rm_watch  294
+#define __NR_migrate_pages     295
+#define __NR_openat            296
+#define __NR_mkdirat           297
+#define __NR_mknodat           298
+#define __NR_fchownat          299
+#define __NR_futimesat         300
+#define __NR_fstatat64         301
+#define __NR_unlinkat          302
+#define __NR_renameat          303
+#define __NR_linkat            304
+#define __NR_symlinkat         305
+#define __NR_readlinkat                306
+#define __NR_fchmodat          307
+#define __NR_faccessat         308
+#define __NR_pselect6          309
+#define __NR_ppoll             310
+#define __NR_unshare           311
+#define __NR_set_robust_list   312
+#define __NR_get_robust_list   313
+#define __NR_splice            314
+#define __NR_sync_file_range   315
+#define __NR_tee               316
+#define __NR_vmsplice          317
+#define __NR_move_pages                318
+#define __NR_getcpu            319
+#define __NR_epoll_pwait       320
+#define __NR_utimensat         321
+#define __NR_signalfd          322
+#define __NR_timerfd_create    323
+#define __NR_eventfd           324
+#define __NR_fallocate         325
+#define __NR_timerfd_settime   326
+#define __NR_timerfd_gettime   327
+
+#ifdef __KERNEL__
+
+#define NR_syscalls 326
+
+/*
+ * specify the deprecated syscalls we want to support on this arch
+ */
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall");
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_UNISTD_H */
diff --git a/include/asm-mn10300/unit-asb2303/clock.h b/include/asm-mn10300/unit-asb2303/clock.h
new file mode 100644 (file)
index 0000000..8b450e9
--- /dev/null
@@ -0,0 +1,45 @@
+/* ASB2303-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_CLOCK_H
+#define _ASM_UNIT_CLOCK_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_MN10300_RTC
+
+extern unsigned long mn10300_ioclk;    /* IOCLK (crystal speed) in HZ */
+extern unsigned long mn10300_iobclk;
+extern unsigned long mn10300_tsc_per_HZ;
+
+#define MN10300_IOCLK          ((unsigned long)mn10300_ioclk)
+/* If this processors has a another clock, uncomment the below. */
+/* #define MN10300_IOBCLK      ((unsigned long)mn10300_iobclk) */
+
+#else /* !CONFIG_MN10300_RTC */
+
+#define MN10300_IOCLK          33333333UL
+/* #define MN10300_IOBCLK      66666666UL */
+
+#endif /* !CONFIG_MN10300_RTC */
+
+#define MN10300_JCCLK          MN10300_IOCLK
+#define MN10300_TSCCLK         MN10300_IOCLK
+
+#ifdef CONFIG_MN10300_RTC
+#define MN10300_TSC_PER_HZ     ((unsigned long)mn10300_tsc_per_HZ)
+#else /* !CONFIG_MN10300_RTC */
+#define MN10300_TSC_PER_HZ     (MN10300_TSCCLK/HZ)
+#endif /* !CONFIG_MN10300_RTC */
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_CLOCK_H */
diff --git a/include/asm-mn10300/unit-asb2303/leds.h b/include/asm-mn10300/unit-asb2303/leds.h
new file mode 100644 (file)
index 0000000..3a7543e
--- /dev/null
@@ -0,0 +1,43 @@
+/* ASB2303-specific LEDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_LEDS_H
+#define _ASM_UNIT_LEDS_H
+
+#include <asm/pio-regs.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#define ASB2303_GPIO0DEF       __SYSREG(0xDB000000, u32)
+#define ASB2303_7SEGLEDS       __SYSREG(0xDB000008, u32)
+
+/*
+ * use the 7-segment LEDs to indicate states
+ */
+
+/* flip the 7-segment LEDs between "G" and "-" */
+#define mn10300_set_gdbleds(ONOFF)                     \
+do {                                                   \
+       ASB2303_7SEGLEDS = (ONOFF) ? 0x85 : 0x7f;       \
+} while (0)
+
+/* indicate double-fault by displaying "d" on the LEDs */
+#define mn10300_set_dbfleds                    \
+       mov     0x43,d0                 ;       \
+       movbu   d0,(ASB2303_7SEGLEDS)
+
+#ifndef __ASSEMBLY__
+extern void peripheral_leds_display_exception(enum exception_code code);
+extern void peripheral_leds_led_chase(void);
+extern void debug_to_serial(const char *p, int n);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_LEDS_H */
diff --git a/include/asm-mn10300/unit-asb2303/serial.h b/include/asm-mn10300/unit-asb2303/serial.h
new file mode 100644 (file)
index 0000000..0d55cf5
--- /dev/null
@@ -0,0 +1,136 @@
+/* ASB2303-specific 8250 serial ports
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_SERIAL_H
+#define _ASM_UNIT_SERIAL_H
+
+#include <asm/cpu-regs.h>
+#include <asm/proc/irq.h>
+#include <linux/serial_reg.h>
+
+#define SERIAL_PORT0_BASE_ADDRESS      0xA6FB0000
+#define SERIAL_PORT1_BASE_ADDRESS      0xA6FC0000
+
+#define SERIAL_IRQ     XIRQ0   /* Dual serial (PC16552)        (Hi) */
+
+/*
+ * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports
+ */
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+
+#define SERIAL_PORT_DFNS                                               \
+       {                                                               \
+       .baud_base              = BASE_BAUD,                            \
+       .irq                    = SERIAL_IRQ,                           \
+       .flags                  = STD_COM_FLAGS,                        \
+       .iomem_base             = (u8 *) SERIAL_PORT0_BASE_ADDRESS,     \
+       .iomem_reg_shift        = 2,                                    \
+       .io_type                = SERIAL_IO_MEM,                        \
+       },                                                              \
+       {                                                               \
+       .baud_base              = BASE_BAUD,                            \
+       .irq                    = SERIAL_IRQ,                           \
+       .flags                  = STD_COM_FLAGS,                        \
+       .iomem_base             = (u8 *) SERIAL_PORT1_BASE_ADDRESS,     \
+       .iomem_reg_shift        = 2,                                    \
+       .io_type                = SERIAL_IO_MEM,                        \
+       },
+
+#ifndef __ASSEMBLY__
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#else /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#define SERIAL_PORT_DFNS /* both stolen by gdb-stub because they share an IRQ */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYS0)
+#define GDBPORT_SERIAL_RX      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX  * 4, u8)
+#define GDBPORT_SERIAL_TX      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
+#define GDBPORT_SERIAL_DLL     __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM     __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER     __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR     __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR     __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR     __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR     __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR     __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR     __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR     __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ     SERIAL_IRQ
+
+#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
+#define GDBPORT_SERIAL_RX      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_RX  * 4, u8)
+#define GDBPORT_SERIAL_TX      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_TX  * 4, u8)
+#define GDBPORT_SERIAL_DLL     __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM     __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER     __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR     __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR     __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR     __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR     __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR     __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR     __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR     __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ     SERIAL_IRQ
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define LSR_WAIT_FOR(STATE)                                    \
+do {                                                           \
+       while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) {}     \
+} while (0)
+#define FLOWCTL_WAIT_FOR(LINE)                                 \
+do {                                                           \
+       while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) {}      \
+} while (0)
+#define FLOWCTL_CLEAR(LINE)                    \
+do {                                           \
+       GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; \
+} while (0)
+#define FLOWCTL_SET(LINE)                      \
+do {                                           \
+       GDBPORT_SERIAL_MCR |= UART_MCR_##LINE;  \
+} while (0)
+#define FLOWCTL_QUERY(LINE)    ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; })
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+       char ch;
+
+       FLOWCTL_SET(DTR);
+
+       for (; n > 0; n--) {
+               LSR_WAIT_FOR(THRE);
+               FLOWCTL_WAIT_FOR(CTS);
+
+               ch = *p++;
+               if (ch == 0x0a) {
+                       GDBPORT_SERIAL_TX = 0x0d;
+                       LSR_WAIT_FOR(THRE);
+                       FLOWCTL_WAIT_FOR(CTS);
+               }
+               GDBPORT_SERIAL_TX = ch;
+       }
+
+       FLOWCTL_CLEAR(DTR);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#endif /* _ASM_UNIT_SERIAL_H */
diff --git a/include/asm-mn10300/unit-asb2303/smc91111.h b/include/asm-mn10300/unit-asb2303/smc91111.h
new file mode 100644 (file)
index 0000000..dd456e9
--- /dev/null
@@ -0,0 +1,50 @@
+/* Support for the SMC91C111 NIC on an ASB2303
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_SMC91111_H
+#define _ASM_UNIT_SMC91111_H
+
+#include <asm/intctl-regs.h>
+
+#define SMC91111_BASE          0xAA000300UL
+#define SMC91111_BASE_END      0xAA000400UL
+#define SMC91111_IRQ           XIRQ3
+
+#define SMC_CAN_USE_8BIT       0
+#define SMC_CAN_USE_16BIT      1
+#define SMC_CAN_USE_32BIT      0
+#define SMC_NOWAIT             1
+#define SMC_IRQ_FLAGS          (0)
+
+#if SMC_CAN_USE_8BIT
+#define SMC_inb(a, r)          inb((unsigned long) ((a) + (r)))
+#define SMC_outb(v, a, r)      outb(v, (unsigned long) ((a) + (r)))
+#endif
+
+#if SMC_CAN_USE_16BIT
+#define SMC_inw(a, r)          inw((unsigned long) ((a) + (r)))
+#define SMC_outw(v, a, r)      outw(v, (unsigned long) ((a) + (r)))
+#define SMC_insw(a, r, p, l)   insw((unsigned long) ((a) + (r)), (p), (l))
+#define SMC_outsw(a, r, p, l)  outsw((unsigned long) ((a) + (r)), (p), (l))
+#endif
+
+#if SMC_CAN_USE_32BIT
+#define SMC_inl(a, r)          inl((unsigned long) ((a) + (r)))
+#define SMC_outl(v, a, r)      outl(v, (unsigned long) ((a) + (r)))
+#define SMC_insl(a, r, p, l)   insl((unsigned long) ((a) + (r)), (p), (l))
+#define SMC_outsl(a, r, p, l)  outsl((unsigned long) ((a) + (r)), (p), (l))
+#endif
+
+#define RPC_LSA_DEFAULT                RPC_LED_100_10
+#define RPC_LSB_DEFAULT                RPC_LED_TX_RX
+
+#define set_irq_type(irq, type)
+
+#endif /*  _ASM_UNIT_SMC91111_H */
diff --git a/include/asm-mn10300/unit-asb2303/timex.h b/include/asm-mn10300/unit-asb2303/timex.h
new file mode 100644 (file)
index 0000000..7e54b0c
--- /dev/null
@@ -0,0 +1,135 @@
+/* ASB2303-specific timer specifcations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_TIMEX_H
+#define _ASM_UNIT_TIMEX_H
+
+#ifndef __ASSEMBLY__
+#include <linux/irq.h>
+#endif /* __ASSEMBLY__ */
+
+#include <asm/timer-regs.h>
+#include <asm/unit/clock.h>
+
+/*
+ * jiffies counter specifications
+ */
+
+#define        TMJCBR_MAX              0xffff
+#define        TMJCBC                  TM01BC
+
+#define        TMJCMD                  TM01MD
+#define        TMJCBR                  TM01BR
+#define        TMJCIRQ                 TM1IRQ
+#define        TMJCICR                 TM1ICR
+#define        TMJCICR_LEVEL           GxICR_LEVEL_5
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_jiffies_counter(void)
+{
+       unsigned rate;
+       u16 md, t16;
+
+       /* use as little prescaling as possible to avoid losing accuracy */
+       md = TM0MD_SRC_IOCLK;
+       rate = MN10300_JCCLK / HZ;
+
+       if (rate > TMJCBR_MAX) {
+               md = TM0MD_SRC_IOCLK_8;
+               rate = MN10300_JCCLK / 8 / HZ;
+
+               if (rate > TMJCBR_MAX) {
+                       md = TM0MD_SRC_IOCLK_32;
+                       rate = MN10300_JCCLK / 32 / HZ;
+
+                       if (rate > TMJCBR_MAX)
+                               BUG();
+               }
+       }
+
+       TMJCBR = rate - 1;
+       t16 = TMJCBR;
+
+       TMJCMD =
+               md |
+               TM1MD_SRC_TM0CASCADE << 8 |
+               TM0MD_INIT_COUNTER |
+               TM1MD_INIT_COUNTER << 8;
+
+       TMJCMD =
+               md |
+               TM1MD_SRC_TM0CASCADE << 8 |
+               TM0MD_COUNT_ENABLE |
+               TM1MD_COUNT_ENABLE << 8;
+
+       t16 = TMJCMD;
+
+       TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+       t16 = TMJCICR;
+}
+
+static inline void shutdown_jiffies_counter(void)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * timestamp counter specifications
+ */
+
+#define        TMTSCBR_MAX             0xffffffff
+#define        TMTSCBC                 TM45BC
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_timestamp_counter(void)
+{
+       /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
+        * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
+        */
+       TM45BR = TMTSCBR_MAX;
+
+       TM4MD = TM4MD_SRC_IOCLK;
+       TM4MD |= TM4MD_INIT_COUNTER;
+       TM4MD &= ~TM4MD_INIT_COUNTER;
+       TM4ICR = 0;
+
+       TM5MD = TM5MD_SRC_TM4CASCADE;
+       TM5MD |= TM5MD_INIT_COUNTER;
+       TM5MD &= ~TM5MD_INIT_COUNTER;
+       TM5ICR = 0;
+
+       TM5MD |= TM5MD_COUNT_ENABLE;
+       TM4MD |= TM4MD_COUNT_ENABLE;
+}
+
+static inline void shutdown_timestamp_counter(void)
+{
+       TM4MD = 0;
+       TM5MD = 0;
+}
+
+/*
+ * we use a cascaded pair of 16-bit down-counting timers to count I/O
+ * clock cycles for the purposes of time keeping
+ */
+typedef unsigned long cycles_t;
+
+static inline cycles_t read_timestamp_counter(void)
+{
+       return (cycles_t)TMTSCBC;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_TIMEX_H */
diff --git a/include/asm-mn10300/unit-asb2305/clock.h b/include/asm-mn10300/unit-asb2305/clock.h
new file mode 100644 (file)
index 0000000..7d51484
--- /dev/null
@@ -0,0 +1,45 @@
+/* ASB2305-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_CLOCK_H
+#define _ASM_UNIT_CLOCK_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_MN10300_RTC
+
+extern unsigned long mn10300_ioclk;    /* IOCLK (crystal speed) in HZ */
+extern unsigned long mn10300_iobclk;
+extern unsigned long mn10300_tsc_per_HZ;
+
+#define MN10300_IOCLK          ((unsigned long)mn10300_ioclk)
+/* If this processors has a another clock, uncomment the below. */
+/* #define MN10300_IOBCLK      ((unsigned long)mn10300_iobclk) */
+
+#else /* !CONFIG_MN10300_RTC */
+
+#define MN10300_IOCLK          33333333UL
+/* #define MN10300_IOBCLK      66666666UL */
+
+#endif /* !CONFIG_MN10300_RTC */
+
+#define MN10300_JCCLK          MN10300_IOCLK
+#define MN10300_TSCCLK         MN10300_IOCLK
+
+#ifdef CONFIG_MN10300_RTC
+#define MN10300_TSC_PER_HZ     ((unsigned long)mn10300_tsc_per_HZ)
+#else /* !CONFIG_MN10300_RTC */
+#define MN10300_TSC_PER_HZ     (MN10300_TSCCLK/HZ)
+#endif /* !CONFIG_MN10300_RTC */
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_CLOCK_H */
diff --git a/include/asm-mn10300/unit-asb2305/leds.h b/include/asm-mn10300/unit-asb2305/leds.h
new file mode 100644 (file)
index 0000000..bc471f6
--- /dev/null
@@ -0,0 +1,51 @@
+/* ASB2305-specific LEDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_LEDS_H
+#define _ASM_UNIT_LEDS_H
+
+#include <asm/pio-regs.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#define ASB2305_7SEGLEDS       __SYSREG(0xA6F90000, u32)
+
+/* perform a hard reset by driving PIO06 low */
+#define mn10300_unit_hard_reset()              \
+do {                                           \
+       P0OUT &= 0xbf;                          \
+       P0MD = (P0MD & P0MD_6) | P0MD_6_OUT;    \
+} while (0)
+
+/*
+ * use the 7-segment LEDs to indicate states
+ */
+/* indicate double-fault by displaying "db-f" on the LEDs */
+#define mn10300_set_dbfleds                    \
+       mov     0x43077f1d,d0           ;       \
+       mov     d0,(ASB2305_7SEGLEDS)
+
+/* flip the 7-segment LEDs between "Gdb-" and "----" */
+#define mn10300_set_gdbleds(ONOFF)                             \
+do {                                                           \
+       ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f;   \
+} while (0)
+
+#ifndef __ASSEMBLY__
+extern void peripheral_leds_display_exception(enum exception_code);
+extern void peripheral_leds_led_chase(void);
+extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_rtc(void);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_LEDS_H */
diff --git a/include/asm-mn10300/unit-asb2305/serial.h b/include/asm-mn10300/unit-asb2305/serial.h
new file mode 100644 (file)
index 0000000..73d31d6
--- /dev/null
@@ -0,0 +1,120 @@
+/* ASB2305-specific 8250 serial ports
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_SERIAL_H
+#define _ASM_UNIT_SERIAL_H
+
+#include <asm/cpu/cpu-regs.h>
+#include <asm/proc/irq.h>
+#include <linux/serial_reg.h>
+
+#define SERIAL_PORT0_BASE_ADDRESS      0xA6FB0000
+#define ASB2305_DEBUG_MCR      __SYSREG(0xA6FB0000 + UART_MCR * 2, u8)
+
+#define SERIAL_IRQ     XIRQ0   /* Dual serial (PC16552)        (Hi) */
+
+/*
+ * dispose of the /dev/ttyS0 serial port
+ */
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+
+#define SERIAL_PORT_DFNS                                               \
+       {                                                               \
+       .baud_base              = BASE_BAUD,                            \
+       .irq                    = SERIAL_IRQ,                           \
+       .flags                  = STD_COM_FLAGS,                        \
+       .iomem_base             = (u8 *) SERIAL_PORT0_BASE_ADDRESS,     \
+       .iomem_reg_shift        = 2,                                    \
+       .io_type                = SERIAL_IO_MEM,                        \
+       },
+
+#ifndef __ASSEMBLY__
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#else /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#define SERIAL_PORT_DFNS /* stolen by gdb-stub */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYS0)
+#define GDBPORT_SERIAL_RX      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX  * 4, u8)
+#define GDBPORT_SERIAL_TX      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
+#define GDBPORT_SERIAL_DLL     __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM     __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER     __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR     __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR     __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR     __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR     __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR     __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR     __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR     __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ     SERIAL_IRQ
+
+#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
+#error The ASB2305 doesnt have a /dev/ttyS1
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define TTYS0_TX       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
+#define TTYS0_MCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define TTYS0_LSR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define TTYS0_MSR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+
+#define LSR_WAIT_FOR(STATE)                            \
+do {                                                   \
+       while (!(TTYS0_LSR & UART_LSR_##STATE)) {}      \
+} while (0)
+#define FLOWCTL_WAIT_FOR(LINE)                         \
+do {                                                   \
+       while (!(TTYS0_MSR & UART_MSR_##LINE)) {}       \
+} while (0)
+#define FLOWCTL_CLEAR(LINE)                    \
+do {                                           \
+       TTYS0_MCR &= ~UART_MCR_##LINE;          \
+} while (0)
+#define FLOWCTL_SET(LINE)                      \
+do {                                           \
+       TTYS0_MCR |= UART_MCR_##LINE;           \
+} while (0)
+#define FLOWCTL_QUERY(LINE)    ({ TTYS0_MSR & UART_MSR_##LINE; })
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+       char ch;
+
+       FLOWCTL_SET(DTR);
+
+       for (; n > 0; n--) {
+               LSR_WAIT_FOR(THRE);
+               FLOWCTL_WAIT_FOR(CTS);
+
+               ch = *p++;
+               if (ch == 0x0a) {
+                       TTYS0_TX = 0x0d;
+                       LSR_WAIT_FOR(THRE);
+                       FLOWCTL_WAIT_FOR(CTS);
+               }
+               TTYS0_TX = ch;
+       }
+
+       FLOWCTL_CLEAR(DTR);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#endif /* _ASM_UNIT_SERIAL_H */
diff --git a/include/asm-mn10300/unit-asb2305/timex.h b/include/asm-mn10300/unit-asb2305/timex.h
new file mode 100644 (file)
index 0000000..10e1bfe
--- /dev/null
@@ -0,0 +1,135 @@
+/* ASB2305 timer specifcations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_TIMEX_H
+#define _ASM_UNIT_TIMEX_H
+
+#ifndef __ASSEMBLY__
+#include <linux/irq.h>
+#endif /* __ASSEMBLY__ */
+
+#include <asm/cpu/timer-regs.h>
+#include <asm/unit/clock.h>
+
+/*
+ * jiffies counter specifications
+ */
+
+#define        TMJCBR_MAX              0xffff
+#define        TMJCBC                  TM01BC
+
+#define        TMJCMD                  TM01MD
+#define        TMJCBR                  TM01BR
+#define        TMJCIRQ                 TM1IRQ
+#define        TMJCICR                 TM1ICR
+#define        TMJCICR_LEVEL           GxICR_LEVEL_5
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_jiffies_counter(void)
+{
+       unsigned rate;
+       u16 md, t16;
+
+       /* use as little prescaling as possible to avoid losing accuracy */
+       md = TM0MD_SRC_IOCLK;
+       rate = MN10300_JCCLK / HZ;
+
+       if (rate > TMJCBR_MAX) {
+               md = TM0MD_SRC_IOCLK_8;
+               rate = MN10300_JCCLK / 8 / HZ;
+
+               if (rate > TMJCBR_MAX) {
+                       md = TM0MD_SRC_IOCLK_32;
+                       rate = MN10300_JCCLK / 32 / HZ;
+
+                       if (rate > TMJCBR_MAX)
+                               BUG();
+               }
+       }
+
+       TMJCBR = rate - 1;
+       t16 = TMJCBR;
+
+       TMJCMD =
+               md |
+               TM1MD_SRC_TM0CASCADE << 8 |
+               TM0MD_INIT_COUNTER |
+               TM1MD_INIT_COUNTER << 8;
+
+       TMJCMD =
+               md |
+               TM1MD_SRC_TM0CASCADE << 8 |
+               TM0MD_COUNT_ENABLE |
+               TM1MD_COUNT_ENABLE << 8;
+
+       t16 = TMJCMD;
+
+       TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+       t16 = TMJCICR;
+}
+
+static inline void shutdown_jiffies_counter(void)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * timestamp counter specifications
+ */
+
+#define        TMTSCBR_MAX             0xffffffff
+#define        TMTSCBC                 TM45BC
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_timestamp_counter(void)
+{
+       /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
+        * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
+        */
+       TM45BR = TMTSCBR_MAX;
+
+       TM4MD = TM4MD_SRC_IOCLK;
+       TM4MD |= TM4MD_INIT_COUNTER;
+       TM4MD &= ~TM4MD_INIT_COUNTER;
+       TM4ICR = 0;
+
+       TM5MD = TM5MD_SRC_TM4CASCADE;
+       TM5MD |= TM5MD_INIT_COUNTER;
+       TM5MD &= ~TM5MD_INIT_COUNTER;
+       TM5ICR = 0;
+
+       TM5MD |= TM5MD_COUNT_ENABLE;
+       TM4MD |= TM4MD_COUNT_ENABLE;
+}
+
+static inline void shutdown_timestamp_counter(void)
+{
+       TM4MD = 0;
+       TM5MD = 0;
+}
+
+/*
+ * we use a cascaded pair of 16-bit down-counting timers to count I/O
+ * clock cycles for the purposes of time keeping
+ */
+typedef unsigned long cycles_t;
+
+static inline cycles_t read_timestamp_counter(void)
+{
+       return (cycles_t) TMTSCBC;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_TIMEX_H */
diff --git a/include/asm-mn10300/user.h b/include/asm-mn10300/user.h
new file mode 100644 (file)
index 0000000..e119390
--- /dev/null
@@ -0,0 +1,53 @@
+/* MN10300 User process data
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_USER_H
+#define _ASM_USER_H
+
+#include <asm/page.h>
+#include <linux/ptrace.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * When the kernel dumps core, it starts by dumping the user struct - this will
+ * be used by gdb to figure out where the data and stack segments are within
+ * the file, and what virtual addresses to use.
+ */
+struct user {
+       /* We start with the registers, to mimic the way that "memory" is
+        * returned from the ptrace(3,...) function.
+        */
+       struct pt_regs regs;            /* Where the registers are actually stored */
+
+       /* The rest of this junk is to help gdb figure out what goes where */
+       unsigned long int u_tsize;      /* Text segment size (pages). */
+       unsigned long int u_dsize;      /* Data segment size (pages). */
+       unsigned long int u_ssize;      /* Stack segment size (pages). */
+       unsigned long start_code;       /* Starting virtual address of text. */
+       unsigned long start_stack;      /* Starting virtual address of stack area.
+                                          This is actually the bottom of the stack,
+                                          the top of the stack is always found in the
+                                          esp register.  */
+       long int signal;                /* Signal that caused the core dump. */
+       int reserved;                   /* No longer used */
+       struct user_pt_regs *u_ar0;     /* Used by gdb to help find the values for */
+
+       /* the registers */
+       unsigned long magic;            /* To uniquely identify a core file */
+       char u_comm[32];                /* User command that was responsible */
+};
+#endif
+
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR   +(u.start_code)
+#define HOST_STACK_END_ADDR    +(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_USER_H */
diff --git a/include/asm-mn10300/vga.h b/include/asm-mn10300/vga.h
new file mode 100644 (file)
index 0000000..0163e50
--- /dev/null
@@ -0,0 +1,17 @@
+/* MN10300 VGA register definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_VGA_H
+#define _ASM_VGA_H
+
+
+
+#endif /* _ASM_VGA_H */
diff --git a/include/asm-mn10300/xor.h b/include/asm-mn10300/xor.h
new file mode 100644 (file)
index 0000000..c82eb12
--- /dev/null
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
index 5834e843a946af4bf2a1e9597c73ec050b904baa..18bea78fe47b3e5ce97f98bac45fd6e1e6acd785 100644 (file)
@@ -31,6 +31,7 @@
 #define EM_V850                87      /* NEC v850 */
 #define EM_M32R                88      /* Renesas M32R */
 #define EM_H8_300      46      /* Renesas H8/300,300H,H8S */
+#define EM_MN10300     89      /* Panasonic/MEI MN10300, AM33 */
 #define EM_BLACKFIN     106     /* ADI Blackfin Processor */
 #define EM_FRV         0x5441  /* Fujitsu FR-V */
 #define EM_AVR32       0x18ad  /* Atmel AVR32 */
@@ -47,6 +48,8 @@
 #define EM_CYGNUS_M32R 0x9041
 /* This is the old interim value for S/390 architecture */
 #define EM_S390_OLD    0xA390
+/* Also Panasonic/MEI MN10300, AM33 */
+#define EM_CYGNUS_MN10300 0xbeef
 
 
 #endif /* _LINUX_ELF_EM_H */
index 568042290c0ba5809269fc250a1d2d56504e04f1..3344185dd3b2cccb45bd76d28ec9815e1df26101 100644 (file)
@@ -222,6 +222,7 @@ extern int panic_on_unrecovered_nmi;
 extern int tainted;
 extern const char *print_tainted(void);
 extern void add_taint(unsigned);
+extern int root_mountflags;
 
 /* Values used for system_state */
 extern enum system_states {
index 4f4008fc73e42d2c6aa66349ba82c78c243fb2c1..ce0bb2600c25e9621b7b895b9457439e3f7ae5e1 100644 (file)
@@ -404,7 +404,8 @@ config DEBUG_HIGHMEM
 config DEBUG_BUGVERBOSE
        bool "Verbose BUG() reporting (adds 70K)" if DEBUG_KERNEL && EMBEDDED
        depends on BUG
-       depends on ARM || AVR32 || M32R || M68K || SPARC32 || SPARC64 || FRV || SUPERH || GENERIC_BUG || BLACKFIN
+       depends on ARM || AVR32 || M32R || M68K || SPARC32 || SPARC64 || \
+                  FRV || SUPERH || GENERIC_BUG || BLACKFIN || MN10300
        default !EMBEDDED
        help
          Say Y here to make BUG() panics output the file name and line number
@@ -454,7 +455,9 @@ config DEBUG_SG
 
 config FRAME_POINTER
        bool "Compile the kernel with frame pointers"
-       depends on DEBUG_KERNEL && (X86 || CRIS || M68K || M68KNOMMU || FRV || UML || S390 || AVR32 || SUPERH || BLACKFIN)
+       depends on DEBUG_KERNEL && \
+               (X86 || CRIS || M68K || M68KNOMMU || FRV || UML || S390 || \
+                AVR32 || SUPERH || BLACKFIN || MN10300)
        default y if DEBUG_INFO && UML
        help
          If you say Y here the resulting kernel image will be slightly larger