]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
i2c/tps65010: Vibrator hookup to gpiolib
authorMarek Vasut <marek.vasut@gmail.com>
Tue, 14 Oct 2008 15:30:04 +0000 (17:30 +0200)
committerJean Delvare <khali@mahadeva.delvare>
Tue, 14 Oct 2008 15:30:04 +0000 (17:30 +0200)
All the tps6501{0,1,2,3,4} chips have a signal for hooking up with
a vibrator (for non-auditory cell phone "ring") ... expose that as
one more (output-only) GPIO.

[ dbrownell@users.sourceforge.net: comments; list tps65014 too ]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
drivers/i2c/chips/tps65010.c

index cf02e8fceb42a7a1ef4ee91c42d0fb8cfdd14ecb..acf8b9d5f575fec8cfe3d2578ab909c0956ce178 100644 (file)
@@ -456,14 +456,17 @@ static irqreturn_t tps65010_irq(int irq, void *_tps)
 
 /* offsets 0..3 == GPIO1..GPIO4
  * offsets 4..5 == LED1/nPG, LED2 (we set one of the non-BLINK modes)
+ * offset 6 == vibrator motor driver
  */
 static void
 tps65010_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
        if (offset < 4)
                tps65010_set_gpio_out_value(offset + 1, value);
-       else
+       else if (offset < 6)
                tps65010_set_led(offset - 3, value ? ON : OFF);
+       else
+               tps65010_set_vib(value);
 }
 
 static int
@@ -477,8 +480,10 @@ tps65010_output(struct gpio_chip *chip, unsigned offset, int value)
                if (!(tps->outmask & (1 << offset)))
                        return -EINVAL;
                tps65010_set_gpio_out_value(offset + 1, value);
-       } else
+       } else if (offset < 6)
                tps65010_set_led(offset - 3, value ? ON : OFF);
+       else
+               tps65010_set_vib(value);
 
        return 0;
 }
@@ -646,7 +651,7 @@ static int tps65010_probe(struct i2c_client *client,
                tps->chip.get = tps65010_gpio_get;
 
                tps->chip.base = board->base;
-               tps->chip.ngpio = 6;
+               tps->chip.ngpio = 7;
                tps->chip.can_sleep = 1;
 
                status = gpiochip_add(&tps->chip);
@@ -675,6 +680,7 @@ static const struct i2c_device_id tps65010_id[] = {
        { "tps65011", TPS65011 },
        { "tps65012", TPS65012 },
        { "tps65013", TPS65013 },
+       { "tps65014", TPS65011 },       /* tps65011 charging at 6.5V max */
        { }
 };
 MODULE_DEVICE_TABLE(i2c, tps65010_id);