]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[PATCH] dvb/v4l: lgdt3302: isolate tuner
authorMichael Krufky <mkrufky@m1k.net>
Wed, 27 Jul 2005 18:45:54 +0000 (11:45 -0700)
committerLinus Torvalds <torvalds@g5.osdl.org>
Wed, 27 Jul 2005 23:26:16 +0000 (16:26 -0700)
Remove the dvb_pll_desc from the frontend and replace with a
pll_set-callback to isolate the tuner programming from the frontend.

Signed-off-by: Mac Michaels <wmichaels1@earthlink.net>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/media/dvb/frontends/lgdt3302.c
drivers/media/dvb/frontends/lgdt3302.h
drivers/media/video/cx88/cx88-dvb.c

index c85a2a99df428b2188f05d9409cd0ecd3cc2b9a3..136563606fb15a0e0a5e74c7d96dd1323bee4d93 100644 (file)
@@ -74,11 +74,14 @@ static int i2c_writebytes (struct lgdt3302_state* state,
                           u8 *buf, /* data bytes to send */
                           int len  /* number of bytes to send */ )
 {
-       if (addr == state->config->pll_address) {
-               struct i2c_msg msg =
-                       { .addr = addr, .flags = 0, .buf = buf,  .len = len };
-               int err;
+       u8 tmp[] = { buf[0], buf[1] };
+       struct i2c_msg msg =
+               { .addr = addr, .flags = 0, .buf = tmp,  .len = 2 };
+       int err;
+       int i;
 
+       for (i=1; i<len; i++) {
+               tmp[1] = buf[i];
                if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
                        printk(KERN_WARNING "lgdt3302: %s error (addr %02x <- %02x, err == %i)\n", __FUNCTION__, addr, buf[0], err);
                        if (err < 0)
@@ -86,27 +89,11 @@ static int i2c_writebytes (struct lgdt3302_state* state,
                        else
                                return -EREMOTEIO;
                }
-       } else {
-               u8 tmp[] = { buf[0], buf[1] };
-               struct i2c_msg msg =
-                       { .addr = addr, .flags = 0, .buf = tmp,  .len = 2 };
-               int err;
-               int i;
-
-               for (i=1; i<len; i++) {
-                       tmp[1] = buf[i];
-                       if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
-                               printk(KERN_WARNING "lgdt3302: %s error (addr %02x <- %02x, err == %i)\n", __FUNCTION__, addr, buf[0], err);
-                               if (err < 0)
-                                       return err;
-                               else
-                                       return -EREMOTEIO;
-                       }
-                       tmp[0]++;
-               }
+               tmp[0]++;
        }
        return 0;
 }
+
 static int i2c_readbytes (struct lgdt3302_state* state,
                          u8 addr, /* demod_address or pll_address */
                          u8 *buf, /* holds data bytes read */
@@ -207,7 +194,6 @@ static int lgdt3302_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 static int lgdt3302_set_parameters(struct dvb_frontend* fe,
                                   struct dvb_frontend_parameters *param)
 {
-       u8 buf[4];
        struct lgdt3302_state* state =
                (struct lgdt3302_state*) fe->demodulator_priv;
 
@@ -290,16 +276,30 @@ static int lgdt3302_set_parameters(struct dvb_frontend* fe,
 
        /* Change only if we are actually changing the channel */
        if (state->current_frequency != param->frequency) {
-               dvb_pll_configure(state->config->pll_desc, buf,
-                                 param->frequency, 0);
-               dprintk("%s: tuner bytes: 0x%02x 0x%02x "
-                       "0x%02x 0x%02x\n", __FUNCTION__, buf[0],buf[1],buf[2],buf[3]);
-               i2c_writebytes(state, state->config->pll_address ,buf, 4);
+               u8 buf[5];
 
-               /* Check the status of the tuner pll */
-               i2c_readbytes(state, state->config->pll_address, buf, 1);
-               dprintk("%s: tuner status byte = 0x%02x\n", __FUNCTION__, buf[0]);
+               /* This must be done before the initialized msg is declared */
+               state->config->pll_set(fe, param, buf);
+
+               struct i2c_msg msg =
+                       { .addr = buf[0], .flags = 0, .buf = &buf[1], .len = 4 };
+               int err;
 
+               dprintk("%s: tuner at 0x%02x bytes: 0x%02x 0x%02x "
+                       "0x%02x 0x%02x\n", __FUNCTION__,
+                       buf[0],buf[1],buf[2],buf[3],buf[4]);
+               if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
+                       printk(KERN_WARNING "lgdt3302: %s error (addr %02x <- %02x, err = %i)\n", __FUNCTION__, buf[0], buf[1], err);
+                       if (err < 0)
+                               return err;
+                       else
+                               return -EREMOTEIO;
+               }
+#if 0
+               /* Check the status of the tuner pll */
+               i2c_readbytes(state, buf[0], &buf[1], 1);
+               dprintk("%s: tuner status byte = 0x%02x\n", __FUNCTION__, buf[1]);
+#endif
                /* Update current frequency */
                state->current_frequency = param->frequency;
        }
@@ -322,12 +322,6 @@ static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status)
 
        *status = 0; /* Reset status result */
 
-       /* Check the status of the tuner pll */
-       i2c_readbytes(state, state->config->pll_address, buf, 1);
-       dprintk("%s: tuner status byte = 0x%02x\n", __FUNCTION__, buf[0]);
-       if ((buf[0] & 0xc0) != 0x40)
-               return 0; /* Tuner PLL not locked or not powered on */
-
        /*
         * You must set the Mask bits to 1 in the IRQ_MASK in order
         * to see that status bit in the IRQ_STATUS register.
index 81587a40032bb0103f0a428ec18c449f6afb5866..327c47e598a232cf52ff163ce1877178f6a1db2b 100644 (file)
@@ -1,6 +1,4 @@
 /*
- * $Id: lgdt3302.h,v 1.2 2005/06/28 23:50:48 mkrufky Exp $
- *
  *    Support for LGDT3302 (DViCO FustionHDTV 3 Gold) - VSB/QAM
  *
  *    Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net>
@@ -30,8 +28,9 @@ struct lgdt3302_config
 {
        /* The demodulator's i2c address */
        u8 demod_address;
-       u8 pll_address;
-       struct dvb_pll_desc *pll_desc;
+
+       /* PLL interface */
+       int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pll_address);
 
        /* Need to set device param for start_dma */
        int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
index 6ad1458ab652c02a5fe04935baa35108e3c0de68..3a8551a02d0ceb4c0c050b28b9e7a0e98e517540 100644 (file)
@@ -1,5 +1,5 @@
 /*
- * $Id: cx88-dvb.c,v 1.42 2005/07/12 15:44:55 mkrufky Exp $
+ * $Id: cx88-dvb.c,v 1.47 2005/07/20 05:20:37 mkrufky Exp $
  *
  * device driver for Conexant 2388x based TV cards
  * MPEG Transport Stream (DVB) routines
@@ -211,6 +211,18 @@ static struct or51132_config pchdtv_hd3000 = {
 #endif
 
 #if CONFIG_DVB_LGDT3302
+static int lgdt3302_pll_set(struct dvb_frontend* fe,
+                           struct dvb_frontend_parameters* params,
+                           u8* pllbuf)
+{
+       struct cx8802_dev *dev= fe->dvb->priv;
+
+       pllbuf[0] = dev->core->pll_addr;
+       dvb_pll_configure(dev->core->pll_desc, &pllbuf[1],
+                         params->frequency, 0);
+       return 0;
+}
+
 static int lgdt3302_set_ts_param(struct dvb_frontend* fe, int is_punctured)
 {
        struct cx8802_dev *dev= fe->dvb->priv;
@@ -221,17 +233,9 @@ static int lgdt3302_set_ts_param(struct dvb_frontend* fe, int is_punctured)
        return 0;
 }
 
-static struct lgdt3302_config fusionhdtv_3_gold_q = {
-       .demod_address    = 0x0e,
-       .pll_address      = 0x61,
-       .pll_desc         = &dvb_pll_microtune_4042,
-       .set_ts_params    = lgdt3302_set_ts_param,
-};
-
-static struct lgdt3302_config fusionhdtv_3_gold_t = {
+static struct lgdt3302_config fusionhdtv_3_gold = {
        .demod_address    = 0x0e,
-       .pll_address      = 0x61,
-       .pll_desc         = &dvb_pll_thomson_dtt7611,
+       .pll_set          = lgdt3302_pll_set,
        .set_ts_params    = lgdt3302_set_ts_param,
 };
 #endif
@@ -294,7 +298,9 @@ static int dvb_register(struct cx8802_dev *dev)
                mdelay(100);
                cx_set(MO_GP0_IO, 9); // ANT connector too FIXME
                mdelay(200);
-               dev->dvb.frontend = lgdt3302_attach(&fusionhdtv_3_gold_q,
+               dev->core->pll_addr = 0x61;
+               dev->core->pll_desc = &dvb_pll_microtune_4042;
+               dev->dvb.frontend = lgdt3302_attach(&fusionhdtv_3_gold,
                                                    &dev->core->i2c_adap);
                }
                break;
@@ -308,7 +314,9 @@ static int dvb_register(struct cx8802_dev *dev)
                mdelay(100);
                cx_set(MO_GP0_IO, 9); /* ANT connector too FIXME */
                mdelay(200);
-               dev->dvb.frontend = lgdt3302_attach(&fusionhdtv_3_gold_t,
+               dev->core->pll_addr = 0x61;
+               dev->core->pll_desc = &dvb_pll_thomson_dtt7611;
+               dev->dvb.frontend = lgdt3302_attach(&fusionhdtv_3_gold,
                                                    &dev->core->i2c_adap);
                }
                break;