]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
palm_bk3710: use ->init_dma method
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Sat, 26 Apr 2008 20:25:23 +0000 (22:25 +0200)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Sat, 26 Apr 2008 20:25:23 +0000 (22:25 +0200)
* Move DMA setup to palm_bk3710_init_dma().

* Convert the driver to use ->init_dma method.

Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/arm/palm_bk3710.c

index 7ed79e7f3110efd2fd1f25b170826bdb8d9d8317..8fa34e26443abbab9023ffaa548fc6ce33897a33 100644 (file)
@@ -317,6 +317,22 @@ static u8 __devinit palm_bk3710_cable_detect(ide_hwif_t *hwif)
        return ATA_CBL_PATA80;
 }
 
+static int __devinit palm_bk3710_init_dma(ide_hwif_t *hwif,
+                                         const struct ide_port_info *d)
+{
+       unsigned long base =
+               hwif->io_ports[IDE_DATA_OFFSET] - IDE_PALM_ATA_PRI_REG_OFFSET;
+
+       printk(KERN_INFO "    %s: MMIO-DMA\n", hwif->name);
+
+       if (ide_allocate_dma_engine(hwif))
+               return -1;
+
+       ide_setup_dma(hwif, base);
+
+       return 0;
+}
+
 static const struct ide_port_ops palm_bk3710_ports_ops = {
        .set_pio_mode           = palm_bk3710_set_pio_mode,
        .set_dma_mode           = palm_bk3710_set_dma_mode,
@@ -324,8 +340,8 @@ static const struct ide_port_ops palm_bk3710_ports_ops = {
 };
 
 static const struct ide_port_info __devinitdata palm_bk3710_port_info = {
+       .init_dma               = palm_bk3710_init_dma,
        .port_ops               = &palm_bk3710_ports_ops,
-       .host_flags             = IDE_HFLAG_NO_DMA, /* hack (no PCI) */
        .pio_mask               = ATA_PIO4,
        .udma_mask              = ATA_UDMA4,    /* (input clk 99MHz) */
        .mwdma_mask             = ATA_MWDMA2,
@@ -392,11 +408,6 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
        hwif->mmio = 1;
        default_hwif_mmiops(hwif);
 
-       printk(KERN_INFO "    %s: MMIO-DMA\n", hwif->name);
-
-       if (ide_allocate_dma_engine(hwif) == 0)
-               ide_setup_dma(hwif, mem->start);
-
        idx[0] = i;
 
        ide_device_add(idx, &palm_bk3710_port_info);