]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[PATCH] md: restart a (raid5) reshape that has been aborted due to a read/write error
authorNeilBrown <neilb@suse.de>
Thu, 1 Mar 2007 04:11:48 +0000 (20:11 -0800)
committerLinus Torvalds <torvalds@woody.linux-foundation.org>
Thu, 1 Mar 2007 22:53:36 +0000 (14:53 -0800)
An error always aborts any resync/recovery/reshape on the understanding that
it will immediately be restarted if that still makes sense.  However a reshape
currently doesn't get restarted.  With this patch it does.

To avoid restarting when it is not possible to do work, we call into the
personality to check that a reshape is ok, and strengthen raid5_check_reshape
to fail if there are too many failed devices.

We also break some code out into a separate function: remove_and_add_spares as
the indent level for that code was getting crazy.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/md/md.c
drivers/md/raid5.c

index b5744b1bd2ba72ca611edd7c735f77e4968979d1..6c06e825cff5af8f070ff9d370f987da7c64f34b 100644 (file)
@@ -5357,6 +5357,44 @@ void md_do_sync(mddev_t *mddev)
 EXPORT_SYMBOL_GPL(md_do_sync);
 
 
+static int remove_and_add_spares(mddev_t *mddev)
+{
+       mdk_rdev_t *rdev;
+       struct list_head *rtmp;
+       int spares = 0;
+
+       ITERATE_RDEV(mddev,rdev,rtmp)
+               if (rdev->raid_disk >= 0 &&
+                   (test_bit(Faulty, &rdev->flags) ||
+                    ! test_bit(In_sync, &rdev->flags)) &&
+                   atomic_read(&rdev->nr_pending)==0) {
+                       if (mddev->pers->hot_remove_disk(
+                                   mddev, rdev->raid_disk)==0) {
+                               char nm[20];
+                               sprintf(nm,"rd%d", rdev->raid_disk);
+                               sysfs_remove_link(&mddev->kobj, nm);
+                               rdev->raid_disk = -1;
+                       }
+               }
+
+       if (mddev->degraded) {
+               ITERATE_RDEV(mddev,rdev,rtmp)
+                       if (rdev->raid_disk < 0
+                           && !test_bit(Faulty, &rdev->flags)) {
+                               rdev->recovery_offset = 0;
+                               if (mddev->pers->hot_add_disk(mddev,rdev)) {
+                                       char nm[20];
+                                       sprintf(nm, "rd%d", rdev->raid_disk);
+                                       sysfs_create_link(&mddev->kobj,
+                                                         &rdev->kobj, nm);
+                                       spares++;
+                                       md_new_event(mddev);
+                               } else
+                                       break;
+                       }
+       }
+       return spares;
+}
 /*
  * This routine is regularly called by all per-raid-array threads to
  * deal with generic issues like resync and super-block update.
@@ -5411,7 +5449,7 @@ void md_check_recovery(mddev_t *mddev)
                return;
 
        if (mddev_trylock(mddev)) {
-               int spares =0;
+               int spares = 0;
 
                spin_lock_irq(&mddev->write_lock);
                if (mddev->safemode && !atomic_read(&mddev->writes_pending) &&
@@ -5474,35 +5512,13 @@ void md_check_recovery(mddev_t *mddev)
                 * Spare are also removed and re-added, to allow
                 * the personality to fail the re-add.
                 */
-               ITERATE_RDEV(mddev,rdev,rtmp)
-                       if (rdev->raid_disk >= 0 &&
-                           (test_bit(Faulty, &rdev->flags) || ! test_bit(In_sync, &rdev->flags)) &&
-                           atomic_read(&rdev->nr_pending)==0) {
-                               if (mddev->pers->hot_remove_disk(mddev, rdev->raid_disk)==0) {
-                                       char nm[20];
-                                       sprintf(nm,"rd%d", rdev->raid_disk);
-                                       sysfs_remove_link(&mddev->kobj, nm);
-                                       rdev->raid_disk = -1;
-                               }
-                       }
-
-               if (mddev->degraded) {
-                       ITERATE_RDEV(mddev,rdev,rtmp)
-                               if (rdev->raid_disk < 0
-                                   && !test_bit(Faulty, &rdev->flags)) {
-                                       rdev->recovery_offset = 0;
-                                       if (mddev->pers->hot_add_disk(mddev,rdev)) {
-                                               char nm[20];
-                                               sprintf(nm, "rd%d", rdev->raid_disk);
-                                               sysfs_create_link(&mddev->kobj, &rdev->kobj, nm);
-                                               spares++;
-                                               md_new_event(mddev);
-                                       } else
-                                               break;
-                               }
-               }
 
-               if (spares) {
+               if (mddev->reshape_position != MaxSector) {
+                       if (mddev->pers->check_reshape(mddev) != 0)
+                               /* Cannot proceed */
+                               goto unlock;
+                       set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
+               } else if ((spares = remove_and_add_spares(mddev))) {
                        clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
                        clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
                } else if (mddev->recovery_cp < MaxSector) {
index 11c3d7bfa797e8777c5b2bdf47d9ec6f68c7da74..29fc06b47d4e07b4bdd64c025eae6180f9a1f5ca 100644 (file)
@@ -3814,6 +3814,8 @@ static int raid5_check_reshape(mddev_t *mddev)
        if (err)
                return err;
 
+       if (mddev->degraded > conf->max_degraded)
+               return -EINVAL;
        /* looks like we might be able to manage this */
        return 0;
 }