]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[ARM] 4260/1: clocksource support for Versatile platform
authorKevin Hilman <khilman@mvista.com>
Thu, 8 Mar 2007 19:25:13 +0000 (20:25 +0100)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Sat, 21 Apr 2007 20:02:39 +0000 (21:02 +0100)
Update Versatile to use new clocksource infrastructure for basic timekeeping.

Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arch/arm/Kconfig
arch/arm/mach-versatile/core.c

index 2aadd0e1e586a0de1cd4aea2a102c12a44557291..cddd054676c043b18c83b2ba0ec76c35b4363401 100644 (file)
@@ -166,6 +166,7 @@ config ARCH_VERSATILE
        select ARM_AMBA
        select ARM_VIC
        select ICST307
+       select GENERIC_TIME
        help
          This enables support for ARM Ltd Versatile board.
 
index bf71507c76fd91602d2513c40f19e06a8740e06b..08a9fe6eeadb48c2780cfe9f90f4294c3972ecfd 100644 (file)
@@ -26,6 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
+#include <linux/clocksource.h>
 
 #include <asm/cnt32_to_63.h>
 #include <asm/system.h>
@@ -828,46 +829,6 @@ void __init versatile_init(void)
 #define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
 #endif
 
-/*
- * Returns number of ms since last clock interrupt.  Note that interrupts
- * will have been disabled by do_gettimeoffset()
- */
-static unsigned long versatile_gettimeoffset(void)
-{
-       unsigned long ticks1, ticks2, status;
-
-       /*
-        * Get the current number of ticks.  Note that there is a race
-        * condition between us reading the timer and checking for
-        * an interrupt.  We get around this by ensuring that the
-        * counter has not reloaded between our two reads.
-        */
-       ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
-       do {
-               ticks1 = ticks2;
-               status = __raw_readl(VA_IC_BASE + VIC_RAW_STATUS);
-               ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
-       } while (ticks2 > ticks1);
-
-       /*
-        * Number of ticks since last interrupt.
-        */
-       ticks1 = TIMER_RELOAD - ticks2;
-
-       /*
-        * Interrupt pending?  If so, we've reloaded once already.
-        *
-        * FIXME: Need to check this is effectively timer 0 that expires
-        */
-       if (status & IRQMASK_TIMERINT0_1)
-               ticks1 += TIMER_RELOAD;
-
-       /*
-        * Convert the ticks to usecs
-        */
-       return TICKS2USECS(ticks1);
-}
-
 /*
  * IRQ handler for the timer
  */
@@ -891,6 +852,36 @@ static struct irqaction versatile_timer_irq = {
        .handler        = versatile_timer_interrupt,
 };
 
+static cycle_t versatile_get_cycles(void)
+{
+       return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
+}
+
+static struct clocksource clocksource_versatile = {
+       .name           = "timer3",
+       .rating         = 200,
+       .read           = versatile_get_cycles,
+       .mask           = CLOCKSOURCE_MASK(32),
+       .shift          = 20,
+       .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init versatile_clocksource_init(void)
+{
+       /* setup timer3 as free-running clocksource */
+       writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+       writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
+       writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
+       writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+              TIMER3_VA_BASE + TIMER_CTRL);
+
+       clocksource_versatile.mult =
+               clocksource_khz2mult(1000, clocksource_versatile.shift);
+       clocksource_register(&clocksource_versatile);
+
+       return 0;
+}
+
 /*
  * Set up timer interrupt, and return the current time in seconds.
  */
@@ -927,9 +918,11 @@ static void __init versatile_timer_init(void)
         * Make irqs happen for the system timer
         */
        setup_irq(IRQ_TIMERINT0_1, &versatile_timer_irq);
+
+       versatile_clocksource_init();
 }
 
 struct sys_timer versatile_timer = {
        .init           = versatile_timer_init,
-       .offset         = versatile_gettimeoffset,
 };
+