]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
cmd640: add ->init_dev method
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Wed, 16 Jul 2008 18:33:42 +0000 (20:33 +0200)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Wed, 16 Jul 2008 18:33:42 +0000 (20:33 +0200)
Convert the driver to use ->init_dev method instead of open-coding devices
init in cmd640x_init().

While at it:

- fix printk()-s to use KERN_INFO level instead of the default KERN_ERR

- use DRV_NAME define in printk()-s

- set proper ->pio_mask also for CONFIG_BLK_DEV_CMD640_ENHANCED=n

There should be no functional changes caused by this patch
(except fixing printk()-s levels).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/pci/cmd640.c

index ab7d7274d8b10e0387f0b19c55eac45b4c2b4018..1ad1e23e310577c2875994fe421e969d6c61ab55 100644 (file)
@@ -611,11 +611,40 @@ static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio)
 
        display_clocks(index);
 }
+#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
+
+static void cmd640_init_dev(ide_drive_t *drive)
+{
+       unsigned int i = drive->hwif->channel * 2 + drive->select.b.unit;
+
+#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+       /*
+        * Reset timing to the slowest speed and turn off prefetch.
+        * This way, the drive identify code has a better chance.
+        */
+       setup_counts[i]    =  4;        /* max possible */
+       active_counts[i]   = 16;        /* max possible */
+       recovery_counts[i] = 16;        /* max possible */
+       program_drive_counts(drive, i);
+       set_prefetch_mode(drive, i, 0);
+       printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch cleared\n", i);
+#else
+       /*
+        * Set the drive unmask flags to match the prefetch setting.
+        */
+       check_prefetch(drive, i);
+       printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch(%s) preserved\n",
+                                 i, drive->no_io_32bit ? "off" : "on");
+#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
+}
+
 
 static const struct ide_port_ops cmd640_port_ops = {
+       .init_dev               = cmd640_init_dev,
+#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
        .set_pio_mode           = cmd640_set_pio_mode,
+#endif
 };
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
 
 static int pci_conf1(void)
 {
@@ -658,10 +687,8 @@ static const struct ide_port_info cmd640_port_info __initdata = {
                                  IDE_HFLAG_NO_DMA |
                                  IDE_HFLAG_ABUSE_PREFETCH |
                                  IDE_HFLAG_ABUSE_FAST_DEVSEL,
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
        .port_ops               = &cmd640_port_ops,
        .pio_mask               = ATA_PIO5,
-#endif
 };
 
 static int cmd640x_init_one(unsigned long base, unsigned long ctl)
@@ -689,7 +716,6 @@ static int __init cmd640x_init(void)
 {
        int second_port_cmd640 = 0, rc;
        const char *bus_type, *port2;
-       unsigned int index;
        u8 b, cfr;
        u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
        hw_regs_t hw[2];
@@ -813,44 +839,6 @@ static int __init cmd640x_init(void)
        printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n",
                         second_port_cmd640 ? "" : "not ", port2);
 
-       /*
-        * Establish initial timings/prefetch for all drives.
-        * Do not unnecessarily disturb any prior BIOS setup of these.
-        */
-       for (index = 0; index < (2 + (second_port_cmd640 << 1)); index++) {
-               ide_drive_t *drive;
-
-               if (index > 1) {
-                       if (cmd_hwif1 == NULL)
-                               continue;
-                       drive = &cmd_hwif1->drives[index & 1];
-               } else  {
-                       if (cmd_hwif0 == NULL)
-                               continue;
-                       drive = &cmd_hwif0->drives[index & 1];
-               }
-
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
-               /*
-                * Reset timing to the slowest speed and turn off prefetch.
-                * This way, the drive identify code has a better chance.
-                */
-               setup_counts    [index] = 4;    /* max possible */
-               active_counts   [index] = 16;   /* max possible */
-               recovery_counts [index] = 16;   /* max possible */
-               program_drive_counts(drive, index);
-               set_prefetch_mode(drive, index, 0);
-               printk("cmd640: drive%d timings/prefetch cleared\n", index);
-#else
-               /*
-                * Set the drive unmask flags to match the prefetch setting
-                */
-               check_prefetch(drive, index);
-               printk("cmd640: drive%d timings/prefetch(%s) preserved\n",
-                       index, drive->no_io_32bit ? "off" : "on");
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
-       }
-
 #ifdef CMD640_DUMP_REGS
        cmd640_dump_regs();
 #endif