#include <linux/types.h>
#include <linux/ioctl.h>
-#include <linux/qic117.h>
/*
* Structures and definitions for mag tape io control commands
#define MT_ISFTAPE_UNKNOWN 0x800000 /* obsolete */
#define MT_ISFTAPE_FLAG 0x800000
-struct mt_tape_info {
- long t_type; /* device type id (mt_type) */
- char *t_name; /* descriptive name */
-};
-
-#define MT_TAPE_INFO { \
- {MT_ISUNKNOWN, "Unknown type of tape device"}, \
- {MT_ISQIC02, "Generic QIC-02 tape streamer"}, \
- {MT_ISWT5150, "Wangtek 5150, QIC-150"}, \
- {MT_ISARCHIVE_5945L2, "Archive 5945L-2"}, \
- {MT_ISCMSJ500, "CMS Jumbo 500"}, \
- {MT_ISTDC3610, "Tandberg TDC 3610, QIC-24"}, \
- {MT_ISARCHIVE_VP60I, "Archive VP60i, QIC-02"}, \
- {MT_ISARCHIVE_2150L, "Archive Viper 2150L"}, \
- {MT_ISARCHIVE_2060L, "Archive Viper 2060L"}, \
- {MT_ISARCHIVESC499, "Archive SC-499 QIC-36 controller"}, \
- {MT_ISQIC02_ALL_FEATURES, "Generic QIC-02 tape, all features"}, \
- {MT_ISWT5099EEN24, "Wangtek 5099-een24, 60MB"}, \
- {MT_ISTEAC_MT2ST, "Teac MT-2ST 155mb data cassette drive"}, \
- {MT_ISEVEREX_FT40A, "Everex FT40A, QIC-40"}, \
- {MT_ISONSTREAM_SC, "OnStream SC-, DI-, DP-, or USB tape drive"}, \
- {MT_ISSCSI1, "Generic SCSI-1 tape"}, \
- {MT_ISSCSI2, "Generic SCSI-2 tape"}, \
- {0, NULL} \
-}
-
/* structure for MTIOCPOS - mag tape get position command */
};
-/* structure for MTIOCVOLINFO, query information about the volume
- * currently positioned at (zftape)
- */
-struct mtvolinfo {
- unsigned int mt_volno; /* vol-number */
- unsigned int mt_blksz; /* blocksize used when recording */
- unsigned int mt_rawsize; /* raw tape space consumed, in kb */
- unsigned int mt_size; /* volume size after decompression, in kb */
- unsigned int mt_cmpr:1; /* this volume has been compressed */
-};
-
-/* raw access to a floppy drive, read and write an arbitrary segment.
- * For ftape/zftape to support formatting etc.
- */
-#define MT_FT_RD_SINGLE 0
-#define MT_FT_RD_AHEAD 1
-#define MT_FT_WR_ASYNC 0 /* start tape only when all buffers are full */
-#define MT_FT_WR_MULTI 1 /* start tape, continue until buffers are empty */
-#define MT_FT_WR_SINGLE 2 /* write a single segment and stop afterwards */
-#define MT_FT_WR_DELETE 3 /* write deleted data marks, one segment at time */
-
-struct mtftseg
-{
- unsigned mt_segno; /* the segment to read or write */
- unsigned mt_mode; /* modes for read/write (sync/async etc.) */
- int mt_result; /* result of r/w request, not of the ioctl */
- void __user *mt_data; /* User space buffer: must be 29kb */
-};
-
-/* get tape capacity (ftape/zftape)
- */
-struct mttapesize {
- unsigned long mt_capacity; /* entire, uncompressed capacity
- * of a cartridge
- */
- unsigned long mt_used; /* what has been used so far, raw
- * uncompressed amount
- */
-};
-
-/* possible values of the ftfmt_op field
- */
-#define FTFMT_SET_PARMS 1 /* set software parms */
-#define FTFMT_GET_PARMS 2 /* get software parms */
-#define FTFMT_FORMAT_TRACK 3 /* start formatting a tape track */
-#define FTFMT_STATUS 4 /* monitor formatting a tape track */
-#define FTFMT_VERIFY 5 /* verify the given segment */
-
-struct ftfmtparms {
- unsigned char ft_qicstd; /* QIC-40/QIC-80/QIC-3010/QIC-3020 */
- unsigned char ft_fmtcode; /* Refer to the QIC specs */
- unsigned char ft_fhm; /* floppy head max */
- unsigned char ft_ftm; /* floppy track max */
- unsigned short ft_spt; /* segments per track */
- unsigned short ft_tpc; /* tracks per cartridge */
-};
-
-struct ftfmttrack {
- unsigned int ft_track; /* track to format */
- unsigned char ft_gap3; /* size of gap3, for FORMAT_TRK */
-};
-
-struct ftfmtstatus {
- unsigned int ft_segment; /* segment currently being formatted */
-};
-
-struct ftfmtverify {
- unsigned int ft_segment; /* segment to verify */
- unsigned long ft_bsm; /* bsm as result of VERIFY cmd */
-};
-
-struct mtftformat {
- unsigned int fmt_op; /* operation to perform */
- union fmt_arg {
- struct ftfmtparms fmt_parms; /* format parameters */
- struct ftfmttrack fmt_track; /* ctrl while formatting */
- struct ftfmtstatus fmt_status;
- struct ftfmtverify fmt_verify; /* for verifying */
- } fmt_arg;
-};
-
-struct mtftcmd {
- unsigned int ft_wait_before; /* timeout to wait for drive to get ready
- * before command is sent. Milliseconds
- */
- qic117_cmd_t ft_cmd; /* command to send */
- unsigned char ft_parm_cnt; /* zero: no parm is sent. */
- unsigned char ft_parms[3]; /* parameter(s) to send to
- * the drive. The parms are nibbles
- * driver sends cmd + 2 step pulses */
- unsigned int ft_result_bits; /* if non zero, number of bits
- * returned by the tape drive
- */
- unsigned int ft_result; /* the result returned by the tape drive*/
- unsigned int ft_wait_after; /* timeout to wait for drive to get ready
- * after command is sent. 0: don't wait */
- int ft_status; /* status returned by ready wait
- * undefined if timeout was 0.
- */
- int ft_error; /* error code if error status was set by
- * command
- */
-};
-
/* mag tape io control commands */
#define MTIOCTOP _IOW('m', 1, struct mtop) /* do a mag tape op */
#define MTIOCGET _IOR('m', 2, struct mtget) /* get tape status */
#define MTIOCPOS _IOR('m', 3, struct mtpos) /* get tape position */
-/* The next two are used by the QIC-02 driver for runtime reconfiguration.
- * See tpqic02.h for struct mtconfiginfo.
- */
-#define MTIOCGETCONFIG _IOR('m', 4, struct mtconfiginfo) /* get tape config */
-#define MTIOCSETCONFIG _IOW('m', 5, struct mtconfiginfo) /* set tape config */
-
-/* the next six are used by the floppy ftape drivers and its frontends
- * sorry, but MTIOCTOP commands are write only.
- */
-#define MTIOCRDFTSEG _IOWR('m', 6, struct mtftseg) /* read a segment */
-#define MTIOCWRFTSEG _IOWR('m', 7, struct mtftseg) /* write a segment */
-#define MTIOCVOLINFO _IOR('m', 8, struct mtvolinfo) /* info about volume */
-#define MTIOCGETSIZE _IOR('m', 9, struct mttapesize)/* get cartridge size*/
-#define MTIOCFTFORMAT _IOWR('m', 10, struct mtftformat) /* format ftape */
-#define MTIOCFTCMD _IOWR('m', 11, struct mtftcmd) /* send QIC-117 cmd */
/* Generic Mag Tape (device independent) status macros for examining
* mt_gstat -- HP-UX compatible.
+++ /dev/null
-#ifndef _QIC117_H
-#define _QIC117_H
-
-/*
- * Copyright (C) 1993-1996 Bas Laarhoven,
- * (C) 1997 Claus-Justus Heine.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING. If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/include/linux/qic117.h,v $
- * $Revision: 1.2 $
- * $Date: 1997/10/05 19:19:32 $
- *
- * This file contains QIC-117 spec. related definitions for the
- * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux.
- *
- * These data were taken from the Quarter-Inch Cartridge
- * Drive Standards, Inc. document titled:
- * `Common Command Set Interface Specification for Flexible
- * Disk Controller Based Minicartridge Tape Drives'
- * document QIC-117 Revision J, 28 Aug 96.
- * For more information, contact:
- * Quarter-Inch Cartridge Drive Standards, Inc.
- * 311 East Carrillo Street
- * Santa Barbara, California 93101
- * Telephone (805) 963-3853
- * Fax (805) 962-1541
- * WWW http://www.qic.org
- *
- * Current QIC standard revisions (of interest) are:
- * QIC-40-MC, Rev. M, 2 Sep 92.
- * QIC-80-MC, Rev. N, 20 Mar 96.
- * QIC-80-MC, Rev. K, 15 Dec 94.
- * QIC-113, Rev. G, 15 Jun 95.
- * QIC-117, Rev. J, 28 Aug 96.
- * QIC-122, Rev. B, 6 Mar 91.
- * QIC-130, Rev. C, 2 Sep 92.
- * QIC-3010-MC, Rev. F, 14 Jun 95.
- * QIC-3020-MC, Rev. G, 31 Aug 95.
- * QIC-CRF3, Rev. B, 15 Jun 95.
- * */
-
-/*
- * QIC-117 common command set rev. J.
- * These commands are sent to the tape unit
- * as number of pulses over the step line.
- */
-
-typedef enum {
- QIC_NO_COMMAND = 0,
- QIC_RESET = 1,
- QIC_REPORT_NEXT_BIT = 2,
- QIC_PAUSE = 3,
- QIC_MICRO_STEP_PAUSE = 4,
- QIC_ALTERNATE_TIMEOUT = 5,
- QIC_REPORT_DRIVE_STATUS = 6,
- QIC_REPORT_ERROR_CODE = 7,
- QIC_REPORT_DRIVE_CONFIGURATION = 8,
- QIC_REPORT_ROM_VERSION = 9,
- QIC_LOGICAL_FORWARD = 10,
- QIC_PHYSICAL_REVERSE = 11,
- QIC_PHYSICAL_FORWARD = 12,
- QIC_SEEK_HEAD_TO_TRACK = 13,
- QIC_SEEK_LOAD_POINT = 14,
- QIC_ENTER_FORMAT_MODE = 15,
- QIC_WRITE_REFERENCE_BURST = 16,
- QIC_ENTER_VERIFY_MODE = 17,
- QIC_STOP_TAPE = 18,
-/* commands 19-20: reserved */
- QIC_MICRO_STEP_HEAD_UP = 21,
- QIC_MICRO_STEP_HEAD_DOWN = 22,
- QIC_SOFT_SELECT = 23,
- QIC_SOFT_DESELECT = 24,
- QIC_SKIP_REVERSE = 25,
- QIC_SKIP_FORWARD = 26,
- QIC_SELECT_RATE = 27,
-/* command 27, in ccs2: Select Rate or Format */
- QIC_ENTER_DIAGNOSTIC_1 = 28,
- QIC_ENTER_DIAGNOSTIC_2 = 29,
- QIC_ENTER_PRIMARY_MODE = 30,
-/* command 31: vendor unique */
- QIC_REPORT_VENDOR_ID = 32,
- QIC_REPORT_TAPE_STATUS = 33,
- QIC_SKIP_EXTENDED_REVERSE = 34,
- QIC_SKIP_EXTENDED_FORWARD = 35,
- QIC_CALIBRATE_TAPE_LENGTH = 36,
- QIC_REPORT_FORMAT_SEGMENTS = 37,
- QIC_SET_FORMAT_SEGMENTS = 38,
-/* commands 39-45: reserved */
- QIC_PHANTOM_SELECT = 46,
- QIC_PHANTOM_DESELECT = 47
-} qic117_cmd_t;
-
-typedef enum {
- discretional = 0, required, ccs1, ccs2
-} qic_compatibility;
-
-typedef enum {
- unused, mode, motion, report
-} command_types;
-
-struct qic117_command_table {
- char *name;
- __u8 mask;
- __u8 state;
- __u8 cmd_type;
- __u8 non_intr;
- __u8 level;
-};
-
-#define QIC117_COMMANDS {\
-/* command mask state cmd_type */\
-/* | name | | | non_intr */\
-/* | | | | | | level */\
-/* 0*/ {NULL, 0x00, 0x00, mode, 0, discretional},\
-/* 1*/ {"soft reset", 0x00, 0x00, motion, 1, required},\
-/* 2*/ {"report next bit", 0x00, 0x00, report, 0, required},\
-/* 3*/ {"pause", 0x36, 0x24, motion, 1, required},\
-/* 4*/ {"micro step pause", 0x36, 0x24, motion, 1, required},\
-/* 5*/ {"alternate command timeout", 0x00, 0x00, mode, 0, required},\
-/* 6*/ {"report drive status", 0x00, 0x00, report, 0, required},\
-/* 7*/ {"report error code", 0x01, 0x01, report, 0, required},\
-/* 8*/ {"report drive configuration",0x00, 0x00, report, 0, required},\
-/* 9*/ {"report rom version", 0x00, 0x00, report, 0, required},\
-/*10*/ {"logical forward", 0x37, 0x25, motion, 0, required},\
-/*11*/ {"physical reverse", 0x17, 0x05, motion, 0, required},\
-/*12*/ {"physical forward", 0x17, 0x05, motion, 0, required},\
-/*13*/ {"seek head to track", 0x37, 0x25, motion, 0, required},\
-/*14*/ {"seek load point", 0x17, 0x05, motion, 1, required},\
-/*15*/ {"enter format mode", 0x1f, 0x05, mode, 0, required},\
-/*16*/ {"write reference burst", 0x1f, 0x05, motion, 1, required},\
-/*17*/ {"enter verify mode", 0x37, 0x25, mode, 0, required},\
-/*18*/ {"stop tape", 0x00, 0x00, motion, 1, required},\
-/*19*/ {"reserved (19)", 0x00, 0x00, unused, 0, discretional},\
-/*20*/ {"reserved (20)", 0x00, 0x00, unused, 0, discretional},\
-/*21*/ {"micro step head up", 0x02, 0x00, motion, 0, required},\
-/*22*/ {"micro step head down", 0x02, 0x00, motion, 0, required},\
-/*23*/ {"soft select", 0x00, 0x00, mode, 0, discretional},\
-/*24*/ {"soft deselect", 0x00, 0x00, mode, 0, discretional},\
-/*25*/ {"skip segments reverse", 0x36, 0x24, motion, 1, required},\
-/*26*/ {"skip segments forward", 0x36, 0x24, motion, 1, required},\
-/*27*/ {"select rate or format", 0x03, 0x01, mode, 0, required /* [ccs2] */},\
-/*28*/ {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional},\
-/*29*/ {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional},\
-/*30*/ {"enter primary mode", 0x00, 0x00, mode, 0, required},\
-/*31*/ {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional},\
-/*32*/ {"report vendor id", 0x00, 0x00, report, 0, required},\
-/*33*/ {"report tape status", 0x04, 0x04, report, 0, ccs1},\
-/*34*/ {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1},\
-/*35*/ {"skip extended forward", 0x36, 0x24, motion, 1, ccs1},\
-/*36*/ {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2},\
-/*37*/ {"report format segments", 0x17, 0x05, report, 0, ccs2},\
-/*38*/ {"set format segments", 0x17, 0x05, mode, 0, ccs2},\
-/*39*/ {"reserved (39)", 0x00, 0x00, unused, 0, discretional},\
-/*40*/ {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional},\
-/*41*/ {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional},\
-/*42*/ {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional},\
-/*43*/ {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional},\
-/*44*/ {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional},\
-/*45*/ {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional},\
-/*46*/ {"phantom select", 0x00, 0x00, mode, 0, discretional},\
-/*47*/ {"phantom deselect", 0x00, 0x00, mode, 0, discretional},\
-}
-
-/*
- * Status bits returned by QIC_REPORT_DRIVE_STATUS
- */
-
-#define QIC_STATUS_READY 0x01 /* Drive is ready or idle. */
-#define QIC_STATUS_ERROR 0x02 /* Error detected, must read
- error code to clear this */
-#define QIC_STATUS_CARTRIDGE_PRESENT 0x04 /* Tape is present */
-#define QIC_STATUS_WRITE_PROTECT 0x08 /* Tape is write protected */
-#define QIC_STATUS_NEW_CARTRIDGE 0x10 /* New cartridge inserted, must
- read error status to clear. */
-#define QIC_STATUS_REFERENCED 0x20 /* Cartridge appears to have been
- formatted. */
-#define QIC_STATUS_AT_BOT 0x40 /* Cartridge is at physical
- beginning of tape. */
-#define QIC_STATUS_AT_EOT 0x80 /* Cartridge is at physical end
- of tape. */
-/*
- * Status bits returned by QIC_REPORT_DRIVE_CONFIGURATION
- */
-
-#define QIC_CONFIG_RATE_MASK 0x18
-#define QIC_CONFIG_RATE_SHIFT 3
-#define QIC_CONFIG_RATE_250 0
-#define QIC_CONFIG_RATE_500 2
-#define QIC_CONFIG_RATE_1000 3
-#define QIC_CONFIG_RATE_2000 1
-#define QIC_CONFIG_RATE_4000 0 /* since QIC-117 Rev. J */
-
-#define QIC_CONFIG_LONG 0x40 /* Extra Length Tape Detected */
-#define QIC_CONFIG_80 0x80 /* QIC-80 detected. */
-
-/*
- * Status bits returned by QIC_REPORT_TAPE_STATUS
- */
-
-#define QIC_TAPE_STD_MASK 0x0f
-#define QIC_TAPE_QIC40 0x01
-#define QIC_TAPE_QIC80 0x02
-#define QIC_TAPE_QIC3020 0x03
-#define QIC_TAPE_QIC3010 0x04
-
-#define QIC_TAPE_LEN_MASK 0x70
-#define QIC_TAPE_205FT 0x10
-#define QIC_TAPE_307FT 0x20
-#define QIC_TAPE_VARIABLE 0x30
-#define QIC_TAPE_1100FT 0x40
-#define QIC_TAPE_FLEX 0x60
-
-#define QIC_TAPE_WIDE 0x80
-
-/* Define a value (in feet) slightly higher than
- * the possible maximum tape length.
- */
-#define QIC_TOP_TAPE_LEN 1500
-
-/*
- * Errors: List of error codes, and their severity.
- */
-
-typedef struct {
- char *message; /* Text describing the error. */
- unsigned int fatal:1; /* Non-zero if the error is fatal. */
-} ftape_error;
-
-#define QIC117_ERRORS {\
- /* 0*/ { "No error", 0, },\
- /* 1*/ { "Command Received while Drive Not Ready", 0, },\
- /* 2*/ { "Cartridge Not Present or Removed", 1, },\
- /* 3*/ { "Motor Speed Error (not within 1%)", 1, },\
- /* 4*/ { "Motor Speed Fault (jammed, or gross speed error", 1, },\
- /* 5*/ { "Cartridge Write Protected", 1, },\
- /* 6*/ { "Undefined or Reserved Command Code", 1, },\
- /* 7*/ { "Illegal Track Address Specified for Seek", 1, },\
- /* 8*/ { "Illegal Command in Report Subcontext", 0, },\
- /* 9*/ { "Illegal Entry into a Diagnostic Mode", 1, },\
- /*10*/ { "Broken Tape Detected (based on hole sensor)", 1, },\
- /*11*/ { "Warning--Read Gain Setting Error", 1, },\
- /*12*/ { "Command Received While Error Status Pending (obs)", 1, },\
- /*13*/ { "Command Received While New Cartridge Pending", 1, },\
- /*14*/ { "Command Illegal or Undefined in Primary Mode", 1, },\
- /*15*/ { "Command Illegal or Undefined in Format Mode", 1, },\
- /*16*/ { "Command Illegal or Undefined in Verify Mode", 1, },\
- /*17*/ { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, },\
- /*18*/ { "Logical EOT Before All Segments generated", 1, },\
- /*19*/ { "Command Illegal When Cartridge Not Referenced", 1, },\
- /*20*/ { "Self-Diagnostic Failed (cannot be cleared)", 1, },\
- /*21*/ { "Warning EEPROM Not Initialized, Defaults Set", 1, },\
- /*22*/ { "EEPROM Corrupted or Hardware Failure", 1, },\
- /*23*/ { "Motion Time-out Error", 1, },\
- /*24*/ { "Data Segment Too Long -- Logical Forward or Pause", 1, },\
- /*25*/ { "Transmit Overrun (obs)", 1, },\
- /*26*/ { "Power On Reset Occurred", 0, },\
- /*27*/ { "Software Reset Occurred", 0, },\
- /*28*/ { "Diagnostic Mode 1 Error", 1, },\
- /*29*/ { "Diagnostic Mode 2 Error", 1, },\
- /*30*/ { "Command Received During Non-Interruptible Process", 1, },\
- /*31*/ { "Rate or Format Selection Error", 1, },\
- /*32*/ { "Illegal Command While in High Speed Mode", 1, },\
- /*33*/ { "Illegal Seek Segment Value", 1, },\
- /*34*/ { "Invalid Media", 1, },\
- /*35*/ { "Head Positioning Failure", 1, },\
- /*36*/ { "Write Reference Burst Failure", 1, },\
- /*37*/ { "Prom Code Missing", 1, },\
- /*38*/ { "Invalid Format", 1, },\
- /*39*/ { "EOT/BOT System Failure", 1, },\
- /*40*/ { "Prom A Checksum Error", 1, },\
- /*41*/ { "Drive Wakeup Reset Occurred", 1, },\
- /*42*/ { "Prom B Checksum Error", 1, },\
- /*43*/ { "Illegal Entry into Format Mode", 1, },\
-}
-
-#endif /* _QIC117_H */
projects / linux-2.6-omap-h63xx.git / commitdiff