ide-pmac: move ide_find_port() call to pmac_ide_setup_device() (take 2)

Move ide_find_port() call to pmac_ide_setup_device().

While at it:

- fix return value (s/-ENODEV/-ENOENT/)

- add DRV_NAME define and use it to set name field of pmac_port_info

- use ide_find_port_slot() instead of ide_find_port()

- remove superfluous error message (ide_find_port_slot() takes care of it)

- drop IDE interface number from driver banner message (but include bus type)

v2:
* Build fix (thanks to Stephen Rothwell for noticing the issue).

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 4530b49e7dd0ce81bd763415039b8a3c704c5ef2..4e2944ee76d8ac9ae6f584563e02ad19d0bd1b32 100644 (file)
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -48,6 +48,8 @@
 #include <asm/mediabay.h>
 #endif
 
+#define DRV_NAME "ide-pmac"
+
 #undef IDE_PMAC_DEBUG
 
 #define DMA_WAIT_TIMEOUT       50
@@ -984,6 +986,7 @@ static const struct ide_port_ops pmac_ide_port_ops = {
 static const struct ide_dma_ops pmac_dma_ops;
 
 static const struct ide_port_info pmac_port_info = {
+       .name                   = DRV_NAME,
        .init_dma               = pmac_ide_init_dma,
        .chipset                = ide_pmac,
 #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
@@ -1002,11 +1005,11 @@ static const struct ide_port_info pmac_port_info = {
  * Setup, register & probe an IDE channel driven by this driver, this is
  * called by one of the 2 probe functions (macio or PCI).
  */
-static int __devinit
-pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
+static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 {
        struct device_node *np = pmif->node;
        const int *bidp;
+       ide_hwif_t *hwif;
        u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
        struct ide_port_info d = pmac_port_info;
 
@@ -1079,16 +1082,21 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
                msleep(jiffies_to_msecs(IDE_WAKEUP_DELAY));
        }
 
+       printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), "
+                        "bus ID %d%s, irq %d\n", model_name[pmif->kind],
+                        pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id,
+                        pmif->mediabay ? " (mediabay)" : "", hw->irq);
+
+       hwif = ide_find_port_slot(&d);
+       if (hwif == NULL)
+               return -ENOENT;
+
        /* Setup MMIO ops */
        default_hwif_mmiops(hwif);
                hwif->OUTBSYNC = pmac_outbsync;
 
        ide_init_port_hw(hwif, hw);
 
-       printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n",
-              hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
-              pmif->mediabay ? " (mediabay)" : "", hwif->irq);
-
        idx[0] = hwif->index;
 
        ide_device_add(idx, &d);
@@ -1114,7 +1122,6 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
 {
        void __iomem *base;
        unsigned long regbase;
-       ide_hwif_t *hwif;
        pmac_ide_hwif_t *pmif;
        int irq, rc;
        hw_regs_t hw;
@@ -1123,14 +1130,6 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
        if (pmif == NULL)
                return -ENOMEM;
 
-       hwif = ide_find_port();
-       if (hwif == NULL) {
-               printk(KERN_ERR "ide-pmac: MacIO interface attach with no slot\n");
-               printk(KERN_ERR "          %s\n", mdev->ofdev.node->full_name);
-               rc = -ENODEV;
-               goto out_free_pmif;
-       }
-
        if (macio_resource_count(mdev) == 0) {
                printk(KERN_WARNING "ide-pmac: no address for %s\n",
                                    mdev->ofdev.node->full_name);
@@ -1185,7 +1184,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
        hw.dev = &mdev->bus->pdev->dev;
        hw.parent = &mdev->ofdev.dev;
 
-       rc = pmac_ide_setup_device(pmif, hwif, &hw);
+       rc = pmac_ide_setup_device(pmif, &hw);
        if (rc != 0) {
                /* The inteface is released to the common IDE layer */
                dev_set_drvdata(&mdev->ofdev.dev, NULL);
@@ -1244,7 +1243,6 @@ pmac_ide_macio_resume(struct macio_dev *mdev)
 static int __devinit
 pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 {
-       ide_hwif_t *hwif;
        struct device_node *np;
        pmac_ide_hwif_t *pmif;
        void __iomem *base;
@@ -1262,14 +1260,6 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
        if (pmif == NULL)
                return -ENOMEM;
 
-       hwif = ide_find_port();
-       if (hwif == NULL) {
-               printk(KERN_ERR "ide-pmac: PCI interface attach with no slot\n");
-               printk(KERN_ERR "          %s\n", np->full_name);
-               rc = -ENODEV;
-               goto out_free_pmif;
-       }
-
        if (pci_enable_device(pdev)) {
                printk(KERN_WARNING "ide-pmac: Can't enable PCI device for "
                                    "%s\n", np->full_name);
@@ -1306,7 +1296,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
        hw.irq = pdev->irq;
        hw.dev = &pdev->dev;
 
-       rc = pmac_ide_setup_device(pmif, hwif, &hw);
+       rc = pmac_ide_setup_device(pmif, &hw);
        if (rc != 0) {
                /* The inteface is released to the common IDE layer */
                pci_set_drvdata(pdev, NULL);