]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[PATCH] ppc32: Converted MPC10X bridge to use platform devices instead of OCP
authorKumar Gala <galak@freescale.com>
Wed, 22 Jun 2005 00:15:21 +0000 (17:15 -0700)
committerLinus Torvalds <torvalds@ppc970.osdl.org>
Wed, 22 Jun 2005 01:46:23 +0000 (18:46 -0700)
Converted the MPC10x bridge support (used by MPC10x and 8240/1/5) to used
the standard platform device model.

Signed-off-by: Matt McClintock <msm@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
arch/ppc/Kconfig
arch/ppc/kernel/setup.c
arch/ppc/syslib/Makefile
arch/ppc/syslib/mpc10x_common.c
include/asm-ppc/mpc10x.h
include/asm-ppc/ppc_sys.h

index 54ce6da2264481c535fa7c39438902566d6fb27c..10162b187bcf000a04897bc45cebefbe4d87c3b0 100644 (file)
@@ -826,11 +826,6 @@ config MPC10X_BRIDGE
        depends on PCORE || POWERPMC250 || LOPEC || SANDPOINT
        default y
 
-config FSL_OCP
-       bool
-       depends on MPC10X_BRIDGE
-       default y
-
 config MPC10X_OPENPIC
        bool
        depends on POWERPMC250 || LOPEC || SANDPOINT
index 5c20266e3b1fd80c45f88af83d0a3b3b475d5bd4..c344c66e68f78eab323f62aaeb5829eb604ab167 100644 (file)
@@ -41,7 +41,7 @@
 #include <asm/xmon.h>
 #include <asm/ocp.h>
 
-#if defined(CONFIG_85xx) || defined(CONFIG_83xx)
+#if defined(CONFIG_85xx) || defined(CONFIG_83xx) || defined(CONFIG_MPC10X_BRIDGE)
 #include <asm/ppc_sys.h>
 #endif
 
@@ -249,7 +249,7 @@ int show_cpuinfo(struct seq_file *m, void *v)
        seq_printf(m, "bogomips\t: %lu.%02lu\n",
                   lpj / (500000/HZ), (lpj / (5000/HZ)) % 100);
 
-#if defined(CONFIG_85xx) || defined(CONFIG_83xx)
+#if defined(CONFIG_85xx) || defined(CONFIG_83xx) || defined(CONFIG_MPC10X_BRIDGE)
        if (cur_ppc_sys_spec->ppc_sys_name)
                seq_printf(m, "chipset\t\t: %s\n",
                        cur_ppc_sys_spec->ppc_sys_name);
index 6e7ecbc59aac68cb39400efde3bbf44673ee2260..dec5bf4f6879ff3956aa3b7cddfde7a2028595f4 100644 (file)
@@ -92,7 +92,7 @@ ifeq ($(CONFIG_SERIAL_MPSC_CONSOLE),y)
 obj-$(CONFIG_SERIAL_TEXT_DEBUG)        += mv64x60_dbg.o
 endif
 obj-$(CONFIG_BOOTX_TEXT)       += btext.o
-obj-$(CONFIG_MPC10X_BRIDGE)     += mpc10x_common.o indirect_pci.o
+obj-$(CONFIG_MPC10X_BRIDGE)    += mpc10x_common.o indirect_pci.o ppc_sys.o
 obj-$(CONFIG_MPC10X_OPENPIC)   += open_pic.o
 obj-$(CONFIG_40x)              += dcr.o
 obj-$(CONFIG_BOOKE)            += dcr.o
index fd93adfd464c6d51e437e9ff4fb32e57a30d0d05..0130aeb4a2d3c3ac0e82ef7d873095328a53567e 100644 (file)
@@ -21,6 +21,9 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
+#include <linux/serial_8250.h>
+#include <linux/fsl_devices.h>
+#include <linux/device.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
 #include <asm/pci-bridge.h>
 #include <asm/open_pic.h>
 #include <asm/mpc10x.h>
-#include <asm/ocp.h>
-
-/* The OCP structure is fixed by code below, before OCP initialises.
-   paddr depends on where the board places the EUMB.
-    - fixed in mpc10x_bridge_init().
-   irq depends on two things:
-    > does the board use the EPIC at all? (PCORE does not).
-    > is the EPIC in serial or parallel mode?
-    - fixed in mpc10x_set_openpic().
-*/
+#include <asm/ppc_sys.h>
 
 #ifdef CONFIG_MPC10X_OPENPIC
 #ifdef CONFIG_EPIC_SERIAL_MODE
 #define MPC10X_DMA0_IRQ (EPIC_IRQ_BASE + 1 + NUM_8259_INTERRUPTS)
 #define MPC10X_DMA1_IRQ (EPIC_IRQ_BASE + 2 + NUM_8259_INTERRUPTS)
 #else
-#define MPC10X_I2C_IRQ OCP_IRQ_NA
-#define MPC10X_DMA0_IRQ OCP_IRQ_NA
-#define MPC10X_DMA1_IRQ OCP_IRQ_NA
+#define MPC10X_I2C_IRQ -1
+#define MPC10X_DMA0_IRQ -1
+#define MPC10X_DMA1_IRQ -1
 #endif
 
-
-struct ocp_def core_ocp[] = {
-       { .vendor       = OCP_VENDOR_INVALID
-       }
+static struct fsl_i2c_platform_data mpc10x_i2c_pdata = {
+       .device_flags           = 0,
 };
 
-static struct ocp_fs_i2c_data mpc10x_i2c_data = {
-       .flags          = 0
+static struct plat_serial8250_port serial_platform_data[] = {
+       { },
 };
-static struct ocp_def mpc10x_i2c_ocp = {
-       .vendor         = OCP_VENDOR_MOTOROLA,
-       .function       = OCP_FUNC_IIC,
-       .index          = 0,
-       .additions      = &mpc10x_i2c_data
+
+struct platform_device ppc_sys_platform_devices[] = {
+       [MPC10X_IIC1] = {
+               .name   = "fsl-i2c",
+               .id     = 1,
+               .dev.platform_data = &mpc10x_i2c_pdata,
+               .num_resources = 2,
+               .resource = (struct resource[]) {
+                       {
+                               .start  = MPC10X_EUMB_I2C_OFFSET,
+                               .end    = MPC10X_EUMB_I2C_OFFSET +
+                                           MPC10X_EUMB_I2C_SIZE - 1,
+                               .flags  = IORESOURCE_MEM,
+                       },
+                       {
+                               .flags  = IORESOURCE_IRQ
+                       },
+               },
+       },
+       [MPC10X_DMA0] = {
+               .name   = "fsl-dma",
+               .id     = 0,
+               .num_resources = 2,
+               .resource = (struct resource[]) {
+                       {
+                               .start  = MPC10X_EUMB_DMA_OFFSET + 0x10,
+                               .end    = MPC10X_EUMB_DMA_OFFSET + 0x1f,
+                               .flags  = IORESOURCE_MEM,
+                       },
+                       {
+                               .flags  = IORESOURCE_IRQ,
+                       },
+               },
+       },
+       [MPC10X_DMA1] = {
+               .name   = "fsl-dma",
+               .id     = 1,
+               .num_resources = 2,
+               .resource = (struct resource[]) {
+                       {
+                               .start  = MPC10X_EUMB_DMA_OFFSET + 0x20,
+                               .end    = MPC10X_EUMB_DMA_OFFSET + 0x2f,
+                               .flags  = IORESOURCE_MEM,
+                       },
+                       {
+                               .flags  = IORESOURCE_IRQ,
+                       },
+               },
+       },
+       [MPC10X_DMA1] = {
+               .name   = "fsl-dma",
+               .id     = 1,
+               .num_resources = 2,
+               .resource = (struct resource[]) {
+                       {
+                               .start  = MPC10X_EUMB_DMA_OFFSET + 0x20,
+                               .end    = MPC10X_EUMB_DMA_OFFSET + 0x2f,
+                               .flags  = IORESOURCE_MEM,
+                       },
+                       {
+                               .flags  = IORESOURCE_IRQ,
+                       },
+               },
+       },
+       [MPC10X_DUART] = {
+               .name = "serial8250",
+               .id     = 0,
+               .dev.platform_data = serial_platform_data,
+       },
 };
 
-static struct ocp_def mpc10x_dma_ocp[2] = {
-{      .vendor         = OCP_VENDOR_MOTOROLA,
-       .function       = OCP_FUNC_DMA,
-       .index          = 0 },
-{      .vendor         = OCP_VENDOR_MOTOROLA,
-       .function       = OCP_FUNC_DMA,
-       .index          = 1 }
+/* We use the PCI ID to match on */
+struct ppc_sys_spec *cur_ppc_sys_spec;
+struct ppc_sys_spec ppc_sys_specs[] = {
+       {
+               .ppc_sys_name   = "8245",
+               .mask           = 0xFFFFFFFF,
+               .value          = MPC10X_BRIDGE_8245,
+               .num_devices    = 4,
+               .device_list    = (enum ppc_sys_devices[])
+               {
+                       MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, MPC10X_DUART,
+               },
+       },
+       {
+               .ppc_sys_name   = "8240",
+               .mask           = 0xFFFFFFFF,
+               .value          = MPC10X_BRIDGE_8240,
+               .num_devices    = 3,
+               .device_list    = (enum ppc_sys_devices[])
+               {
+                       MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1,
+               },
+       },
+       {
+               .ppc_sys_name   = "107",
+               .mask           = 0xFFFFFFFF,
+               .value          = MPC10X_BRIDGE_107,
+               .num_devices    = 3,
+               .device_list    = (enum ppc_sys_devices[])
+               {
+                       MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1,
+               },
+       },
+       {       /* default match */
+               .ppc_sys_name   = "",
+               .mask           = 0x00000000,
+               .value          = 0x00000000,
+       },
 };
 
 /* Set resources to match bridge memory map */
@@ -132,7 +219,7 @@ mpc10x_bridge_init(struct pci_controller *hose,
                   uint new_map,
                   uint phys_eumb_base)
 {
-       int     host_bridge, picr1, picr1_bit;
+       int     host_bridge, picr1, picr1_bit, i;
        ulong   pci_config_addr, pci_config_data;
        u_char  pir, byte;
 
@@ -273,7 +360,7 @@ mpc10x_bridge_init(struct pci_controller *hose,
                        printk("Host bridge in Agent mode\n");
                        /* Read or Set LMBAR & PCSRBAR? */
                }
-               
+
                /* Set base addr of the 8240/107 EUMB.  */
                early_write_config_dword(hose,
                                         0,
@@ -287,17 +374,6 @@ mpc10x_bridge_init(struct pci_controller *hose,
                        ioremap(phys_eumb_base + MPC10X_EUMB_EPIC_OFFSET,
                                MPC10X_EUMB_EPIC_SIZE);
 #endif
-               mpc10x_i2c_ocp.paddr = phys_eumb_base + MPC10X_EUMB_I2C_OFFSET;
-               mpc10x_i2c_ocp.irq = MPC10X_I2C_IRQ;
-               ocp_add_one_device(&mpc10x_i2c_ocp);
-               mpc10x_dma_ocp[0].paddr = phys_eumb_base +
-                                       MPC10X_EUMB_DMA_OFFSET + 0x100;
-               mpc10x_dma_ocp[0].irq = MPC10X_DMA0_IRQ;
-               ocp_add_one_device(&mpc10x_dma_ocp[0]);
-               mpc10x_dma_ocp[1].paddr = phys_eumb_base +
-                                       MPC10X_EUMB_DMA_OFFSET + 0x200;
-               mpc10x_dma_ocp[1].irq = MPC10X_DMA1_IRQ;
-               ocp_add_one_device(&mpc10x_dma_ocp[1]);
        }
 
 #ifdef CONFIG_MPC10X_STORE_GATHERING
@@ -306,6 +382,23 @@ mpc10x_bridge_init(struct pci_controller *hose,
        mpc10x_disable_store_gathering(hose);
 #endif
 
+       /* setup platform devices for MPC10x bridges */
+       identify_ppc_sys_by_id (host_bridge);
+
+       for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
+               unsigned int dev_id = cur_ppc_sys_spec->device_list[i];
+               ppc_sys_fixup_mem_resource(&ppc_sys_platform_devices[dev_id],
+                       phys_eumb_base);
+       }
+
+       /* IRQ's are determined at runtime */
+       ppc_sys_platform_devices[MPC10X_IIC1].resource[1].start = MPC10X_I2C_IRQ;
+       ppc_sys_platform_devices[MPC10X_IIC1].resource[1].end = MPC10X_I2C_IRQ;
+       ppc_sys_platform_devices[MPC10X_DMA0].resource[1].start = MPC10X_DMA0_IRQ;
+       ppc_sys_platform_devices[MPC10X_DMA0].resource[1].end = MPC10X_DMA0_IRQ;
+       ppc_sys_platform_devices[MPC10X_DMA1].resource[1].start = MPC10X_DMA1_IRQ;
+       ppc_sys_platform_devices[MPC10X_DMA1].resource[1].end = MPC10X_DMA1_IRQ;
+
        /*
         * 8240 erratum 26, 8241/8245 erratum 29, 107 erratum 23: speculative
         * PCI reads may return stale data so turn off.
@@ -330,7 +423,7 @@ mpc10x_bridge_init(struct pci_controller *hose,
         * 8245 (Rev 2., dated 10/2003) says PICR2[0] is reserverd.
         */
        if (host_bridge == MPC10X_BRIDGE_8245) {
-               ulong   picr2;
+               u32     picr2;
 
                early_read_config_dword(hose, 0, PCI_DEVFN(0,0),
                        MPC10X_CFG_PICR2_REG, &picr2);
index d8e7e2d6128e70f5f170f58188da06966485af50..f5196a4efbe0ff43e4e16c54780b126808887efe 100644 (file)
@@ -159,6 +159,12 @@ extern unsigned long                       ioremap_base;
 #define        MPC10X_MAPA_EUMB_BASE           (ioremap_base - MPC10X_EUMB_SIZE)
 #define        MPC10X_MAPB_EUMB_BASE           MPC10X_MAPA_EUMB_BASE
 
+enum ppc_sys_devices {
+       MPC10X_IIC1,
+       MPC10X_DMA0,
+       MPC10X_DMA1,
+       MPC10X_DUART,
+};
 
 int mpc10x_bridge_init(struct pci_controller *hose,
                       uint current_map,
index 24b991c427694d425225c2cacde01b5bc469ed0a..8ea6245662312f644aef30cf26c204e99e4512a2 100644 (file)
@@ -27,6 +27,8 @@
 #include <asm/mpc85xx.h>
 #elif defined(CONFIG_PPC_MPC52xx)
 #include <asm/mpc52xx.h>
+#elif defined(CONFIG_MPC10X_BRIDGE)
+#include <asm/mpc10x.h>
 #else
 #error "need definition of ppc_sys_devices"
 #endif