/* NCR53C9x.c: Defines and structures for the NCR53C9x generic driver.
*
- * Originaly esp.h: Defines and structures for the Sparc ESP
+ * Originally esp.h: Defines and structures for the Sparc ESP
* (Enhanced SCSI Processor) driver under Linux.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- (uint8_t *)ahd->qoutfifo);
}
-/*********************** Miscelaneous Support Functions ***********************/
+/*********************** Miscellaneous Support Functions ***********************/
static __inline struct ahd_initiator_tinfo *
ahd_fetch_transinfo(struct ahd_softc *ahd,
char channel, u_int our_id,
" verbose Enable verbose/diagnostic logging\n"
" allow_memio Allow device registers to be memory mapped\n"
" debug Bitmask of debug values to enable\n"
-" no_reset Supress initial bus resets\n"
+" no_reset Suppress initial bus resets\n"
" extended Enable extended geometry on all controllers\n"
" periodic_otag Send an ordered tagged transaction\n"
" periodically to prevent tag starvation.\n"
| AHD_FAINT_LED_BUG;
/*
- * IO Cell paramter setup.
+ * IO Cell parameter setup.
*/
AHD_SET_PRECOMP(ahd, AHD_PRECOMP_CUTBACK_29);
ahd->bugs |= AHD_INTCOLLISION_BUG|AHD_ABORT_LQI_BUG;
/*
- * IO Cell paramter setup.
+ * IO Cell parameter setup.
*/
AHD_SET_PRECOMP(ahd, AHD_PRECOMP_CUTBACK_29);
AHD_SET_SLEWRATE(ahd, AHD_SLEWRATE_DEF_REVB);
return (ahc->name);
}
-/*********************** Miscelaneous Support Functions ***********************/
+/*********************** Miscellaneous Support Functions ***********************/
static __inline void ahc_update_residual(struct ahc_softc *ahc,
struct scb *scb);
" debug Bitmask of debug values to enable\n"
" no_probe Toggle EISA/VLB controller probing\n"
" probe_eisa_vl Toggle EISA/VLB controller probing\n"
-" no_reset Supress initial bus resets\n"
+" no_reset Suppress initial bus resets\n"
" extended Enable extended geometry on all controllers\n"
" periodic_otag Send an ordered tagged transaction\n"
" periodically to prevent tag starvation.\n"
* where it can accept new commands.
* Return value:
- * 0 on sucess / -EIO on failure
+ * 0 on success / -EIO on failure
**/
static int __devinit ipr_probe_ioa_part2(struct ipr_ioa_cfg *ioa_cfg)
{
cstatus.value = (*ha->func.statupd) (ha);
if (cstatus.fields.command_id > (IPS_MAX_CMDS - 1)) {
- /* Spurious Interupt ? */
+ /* Spurious Interrupt ? */
continue;
}
#define WORKER_MBOX_TMO 0x100 /* hba: MBOX timeout */
#define WORKER_HB_TMO 0x200 /* hba: Heart beat timeout */
-#define WORKER_FABRIC_BLOCK_TMO 0x400 /* hba: fabric block timout */
+#define WORKER_FABRIC_BLOCK_TMO 0x400 /* hba: fabric block timeout */
#define WORKER_RAMP_DOWN_QUEUE 0x800 /* hba: Decrease Q depth */
#define WORKER_RAMP_UP_QUEUE 0x1000 /* hba: Increase Q depth */
void
lpfc_mbox_cmpl_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq)
{
- /* This function expects to be called from interupt context */
+ /* This function expects to be called from interrupt context */
spin_lock(&phba->hbalock);
list_add_tail(&mbq->list, &phba->sli.mboxq_cmpl);
spin_unlock(&phba->hbalock);
/*
* START: Interface for the common management module
*
- * This is the module, which interfaces with the common mangement module to
+ * This is the module, which interfaces with the common management module to
* provide support for ioctl and sysfs
*/
/**
- * megaraid_cmm_register - register with the mangement module
+ * megaraid_cmm_register - register with the management module
* @adapter : HBA soft state
*
* Register with the management module, which allows applications to issue
/**
- * megaraid_cmm_unregister - un-register with the mangement module
+ * megaraid_cmm_unregister - un-register with the management module
* @adapter : HBA soft state
*
* Un-register with the management module.
* @kioc : CMM interface packet
* @action : command action
*
- * This routine is invoked whenever the Common Mangement Module (CMM) has a
+ * This routine is invoked whenever the Common Management Module (CMM) has a
* command for us. The 'action' parameter specifies if this is a new command
* or otherwise.
*/
*
* This routine will be called whenever user reads the logical drive
* attributes, go get the current logical drive mapping table from the
- * firmware. We use the managment API's to issue commands to the controller.
+ * firmware. We use the management API's to issue commands to the controller.
*
* NOTE: The commands issuance functionality is not generalized and
* implemented in context of "get ld map" command only. If required, the
}
/**
- * qla2x00_mgmt_svr_login() - Login to fabric Managment Service.
+ * qla2x00_mgmt_svr_login() - Login to fabric Management Service.
* @ha: HA context
*
* Returns 0 on success.
#define MAX_REQS_SERVICED_PER_INTR 16
#define ISCSI_IPADDR_SIZE 4 /* IP address size */
-#define ISCSI_ALIAS_SIZE 32 /* ISCSI Alais name size */
+#define ISCSI_ALIAS_SIZE 32 /* ISCSI Alias name size */
#define ISCSI_NAME_SIZE 0xE0 /* ISCSI Name size */
#define LSDW(x) ((u32)((u64)(x)))
}
config_chip = 1;
- /* Reset clears the semaphore, so aquire again */
+ /* Reset clears the semaphore, so acquire again */
if (ql4xxx_lock_drvr_wait(ha) != QLA_SUCCESS)
return QLA_ERROR;
}
EXPORT_SYMBOL_GPL(scsi_tgt_queue_command);
/*
- * This is run from a interrpt handler normally and the unmap
+ * This is run from a interrupt handler normally and the unmap
* needs process context so we must queue
*/
static void scsi_tgt_cmd_done(struct scsi_cmnd *cmd)
*
* The SAS transport class contains common code to deal with SAS HBAs,
* an aproximated representation of SAS topologies in the driver model,
- * and various sysfs attributes to expose these topologies and managment
+ * and various sysfs attributes to expose these topologies and management
* interfaces to userspace.
*
* In addition to the basic SCSI core objects this transport class
projects / linux-2.6-omap-h63xx.git / commitdiff