net: Delete NETDEVICES_MULTIQUEUE kconfig option.

Multiple TX queue support is a core networking feature.

Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/Documentation/networking/multiqueue.txt b/Documentation/networking/multiqueue.txt
index ea5a42e8f79f780ff14549b820423156f0fd5cd2..e6dc1ee9e8f19fef20a2553252cc4fb87b334f71 100644 (file)
--- a/Documentation/networking/multiqueue.txt
+++ b/Documentation/networking/multiqueue.txt
@@ -3,19 +3,11 @@
                ===========================================
 
 Section 1: Base driver requirements for implementing multiqueue support
-Section 2: Qdisc support for multiqueue devices
-Section 3: Brief howto using PRIO or RR for multiqueue devices
-
 
 Intro: Kernel support for multiqueue devices
 ---------------------------------------------------------
 
-Kernel support for multiqueue devices is only an API that is presented to the
-netdevice layer for base drivers to implement.  This feature is part of the
-core networking stack, and all network devices will be running on the
-multiqueue-aware stack.  If a base driver only has one queue, then these
-changes are transparent to that driver.
-
+Kernel support for multiqueue devices is always present.
 
 Section 1: Base driver requirements for implementing multiqueue support
 -----------------------------------------------------------------------
@@ -43,73 +35,4 @@ bitmap on device initialization.  Below is an example from e1000:
                netdev->features |= NETIF_F_MULTI_QUEUE;
 #endif
 
-
-Section 2: Qdisc support for multiqueue devices
------------------------------------------------
-
-Currently two qdiscs support multiqueue devices.  A new round-robin qdisc,
-sch_rr, and sch_prio. The qdisc is responsible for classifying the skb's to
-bands and queues, and will store the queue mapping into skb->queue_mapping.
-Use this field in the base driver to determine which queue to send the skb
-to.
-
-sch_rr has been added for hardware that doesn't want scheduling policies from
-software, so it's a straight round-robin qdisc.  It uses the same syntax and
-classification priomap that sch_prio uses, so it should be intuitive to
-configure for people who've used sch_prio.
-
-In order to utilitize the multiqueue features of the qdiscs, the network
-device layer needs to enable multiple queue support.  This can be done by
-selecting NETDEVICES_MULTIQUEUE under Drivers.
-
-The PRIO qdisc naturally plugs into a multiqueue device.  If
-NETDEVICES_MULTIQUEUE is selected, then on qdisc load, the number of
-bands requested is compared to the number of queues on the hardware.  If they
-are equal, it sets a one-to-one mapping up between the queues and bands.  If
-they're not equal, it will not load the qdisc.  This is the same behavior
-for RR.  Once the association is made, any skb that is classified will have
-skb->queue_mapping set, which will allow the driver to properly queue skb's
-to multiple queues.
-
-
-Section 3: Brief howto using PRIO and RR for multiqueue devices
----------------------------------------------------------------
-
-The userspace command 'tc,' part of the iproute2 package, is used to configure
-qdiscs.  To add the PRIO qdisc to your network device, assuming the device is
-called eth0, run the following command:
-
-# tc qdisc add dev eth0 root handle 1: prio bands 4 multiqueue
-
-This will create 4 bands, 0 being highest priority, and associate those bands
-to the queues on your NIC.  Assuming eth0 has 4 Tx queues, the band mapping
-would look like:
-
-band 0 => queue 0
-band 1 => queue 1
-band 2 => queue 2
-band 3 => queue 3
-
-Traffic will begin flowing through each queue if your TOS values are assigning
-traffic across the various bands.  For example, ssh traffic will always try to
-go out band 0 based on TOS -> Linux priority conversion (realtime traffic),
-so it will be sent out queue 0.  ICMP traffic (pings) fall into the "normal"
-traffic classification, which is band 1.  Therefore pings will be send out
-queue 1 on the NIC.
-
-Note the use of the multiqueue keyword.  This is only in versions of iproute2
-that support multiqueue networking devices; if this is omitted when loading
-a qdisc onto a multiqueue device, the qdisc will load and operate the same
-if it were loaded onto a single-queue device (i.e. - sends all traffic to
-queue 0).
-
-Another alternative to multiqueue band allocation can be done by using the
-multiqueue option and specify 0 bands.  If this is the case, the qdisc will
-allocate the number of bands to equal the number of queues that the device
-reports, and bring the qdisc online.
-
-The behavior of tc filters remains the same, where it will override TOS priority
-classification.
-
-
 Author: Peter P. Waskiewicz Jr. <peter.p.waskiewicz.jr@intel.com>

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ef733abc857d2fa9c52ab04c60f3e8360bc6ae13..4675c1bd6fb9045db6f1bb6ea2ebba91205f34a1 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -26,14 +26,6 @@ menuconfig NETDEVICES
 # that for each of the symbols.
 if NETDEVICES
 
-config NETDEVICES_MULTIQUEUE
-       bool "Netdevice multiple hardware queue support"
-       ---help---
-         Say Y here if you want to allow the network stack to use multiple
-         hardware TX queues on an ethernet device.
-
-         Most people will say N here.
-
 config IFB
        tristate "Intermediate Functional Block support"
        depends on NET_CLS_ACT

diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 7f3f62e1b1134f2c816770f61fcc4dd0d54139b7..d630e2a72f42d98e4d35be976cc7e6b3d7e552a7 100644 (file)
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -569,11 +569,7 @@ static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
        len = max(skb->len, ETH_ZLEN);
        queue = skb_get_queue_mapping(skb);
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        netif_stop_subqueue(dev, queue);
-#else
-       netif_stop_queue(dev);
-#endif
 
        desc = &priv->desc_ring[queue];
        if (unlikely(desc->dataflags & CPMAC_OWN)) {
@@ -626,24 +622,14 @@ static void cpmac_end_xmit(struct net_device *dev, int queue)
 
                dev_kfree_skb_irq(desc->skb);
                desc->skb = NULL;
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
                if (netif_subqueue_stopped(dev, queue))
                        netif_wake_subqueue(dev, queue);
-#else
-               if (netif_queue_stopped(dev))
-                       netif_wake_queue(dev);
-#endif
        } else {
                if (netif_msg_tx_err(priv) && net_ratelimit())
                        printk(KERN_WARNING
                               "%s: end_xmit: spurious interrupt\n", dev->name);
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
                if (netif_subqueue_stopped(dev, queue))
                        netif_wake_subqueue(dev, queue);
-#else
-               if (netif_queue_stopped(dev))
-                       netif_wake_queue(dev);
-#endif
        }
 }
 

diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 12990b1fe7e41b267d724b1c200f227cfb1d597c..81b769093d22a7f1685492c3bba385112d73b8eb 100644 (file)
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -252,21 +252,15 @@ static int ixgbe_set_tso(struct net_device *netdev, u32 data)
                netdev->features |= NETIF_F_TSO;
                netdev->features |= NETIF_F_TSO6;
        } else {
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
                struct ixgbe_adapter *adapter = netdev_priv(netdev);
                int i;
-#endif
                netif_stop_queue(netdev);
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
                for (i = 0; i < adapter->num_tx_queues; i++)
                        netif_stop_subqueue(netdev, i);
-#endif
                netdev->features &= ~NETIF_F_TSO;
                netdev->features &= ~NETIF_F_TSO6;
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
                for (i = 0; i < adapter->num_tx_queues; i++)
                        netif_start_subqueue(netdev, i);
-#endif
                netif_start_queue(netdev);
        }
        return 0;

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index b37d618d8e2a90cc68a328d991caddfe1a1b3309..10a1c8c5cda13db542464e566f39a4f28d53d370 100644 (file)
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -266,28 +266,16 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter,
                 * sees the new next_to_clean.
                 */
                smp_mb();
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
                if (__netif_subqueue_stopped(netdev, tx_ring->queue_index) &&
                    !test_bit(__IXGBE_DOWN, &adapter->state)) {
                        netif_wake_subqueue(netdev, tx_ring->queue_index);
                        adapter->restart_queue++;
                }
-#else
-               if (netif_queue_stopped(netdev) &&
-                   !test_bit(__IXGBE_DOWN, &adapter->state)) {
-                       netif_wake_queue(netdev);
-                       adapter->restart_queue++;
-               }
-#endif
        }
 
        if (adapter->detect_tx_hung)
                if (ixgbe_check_tx_hang(adapter, tx_ring, eop, eop_desc))
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
                        netif_stop_subqueue(netdev, tx_ring->queue_index);
-#else
-                       netif_stop_queue(netdev);
-#endif
 
        if (total_tx_packets >= tx_ring->work_limit)
                IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, tx_ring->eims_value);
@@ -2192,11 +2180,7 @@ static void __devinit ixgbe_set_num_queues(struct ixgbe_adapter *adapter)
                case (IXGBE_FLAG_RSS_ENABLED):
                        rss_m = 0xF;
                        nrq = rss_i;
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
                        ntq = rss_i;
-#else
-                       ntq = 1;
-#endif
                        break;
                case 0:
                default:
@@ -2370,10 +2354,8 @@ try_msi:
        }
 
 out:
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        /* Notify the stack of the (possibly) reduced Tx Queue count. */
        adapter->netdev->egress_subqueue_count = adapter->num_tx_queues;
-#endif
 
        return err;
 }
@@ -2910,9 +2892,7 @@ static void ixgbe_watchdog(unsigned long data)
        struct net_device *netdev = adapter->netdev;
        bool link_up;
        u32 link_speed = 0;
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        int i;
-#endif
 
        adapter->hw.mac.ops.check_link(&adapter->hw, &(link_speed), &link_up);
 
@@ -2934,10 +2914,8 @@ static void ixgbe_watchdog(unsigned long data)
 
                        netif_carrier_on(netdev);
                        netif_wake_queue(netdev);
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
                        for (i = 0; i < adapter->num_tx_queues; i++)
                                netif_wake_subqueue(netdev, i);
-#endif
                } else {
                        /* Force detection of hung controller */
                        adapter->detect_tx_hung = true;
@@ -3264,11 +3242,7 @@ static int __ixgbe_maybe_stop_tx(struct net_device *netdev,
 {
        struct ixgbe_adapter *adapter = netdev_priv(netdev);
 
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        netif_stop_subqueue(netdev, tx_ring->queue_index);
-#else
-       netif_stop_queue(netdev);
-#endif
        /* Herbert's original patch had:
         *  smp_mb__after_netif_stop_queue();
         * but since that doesn't exist yet, just open code it. */
@@ -3280,11 +3254,7 @@ static int __ixgbe_maybe_stop_tx(struct net_device *netdev,
                return -EBUSY;
 
        /* A reprieve! - use start_queue because it doesn't call schedule */
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        netif_wake_subqueue(netdev, tx_ring->queue_index);
-#else
-       netif_wake_queue(netdev);
-#endif
        ++adapter->restart_queue;
        return 0;
 }
@@ -3312,9 +3282,7 @@ static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
        unsigned int f;
        unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
        len -= skb->data_len;
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        r_idx = (adapter->num_tx_queues - 1) & skb->queue_mapping;
-#endif
        tx_ring = &adapter->tx_ring[r_idx];
 
 
@@ -3502,11 +3470,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
        pci_set_master(pdev);
        pci_save_state(pdev);
 
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), MAX_TX_QUEUES);
-#else
-       netdev = alloc_etherdev(sizeof(struct ixgbe_adapter));
-#endif
        if (!netdev) {
                err = -ENOMEM;
                goto err_alloc_etherdev;
@@ -3598,9 +3562,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
        if (pci_using_dac)
                netdev->features |= NETIF_F_HIGHDMA;
 
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        netdev->features |= NETIF_F_MULTI_QUEUE;
-#endif
 
        /* make sure the EEPROM is good */
        if (ixgbe_validate_eeprom_checksum(hw, NULL) < 0) {
@@ -3668,10 +3630,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 
        netif_carrier_off(netdev);
        netif_stop_queue(netdev);
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        for (i = 0; i < adapter->num_tx_queues; i++)
                netif_stop_subqueue(netdev, i);
-#endif
 
        ixgbe_napi_add_all(adapter);
 

diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index e7a3dbec674c56ed08e3109895b690e203c20ea6..51a91154125d040a9036b4e6245a4a45a148ecdc 100644 (file)
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -546,13 +546,10 @@ static struct pci_driver s2io_driver = {
 static inline void s2io_stop_all_tx_queue(struct s2io_nic *sp)
 {
        int i;
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        if (sp->config.multiq) {
                for (i = 0; i < sp->config.tx_fifo_num; i++)
                        netif_stop_subqueue(sp->dev, i);
-       } else
-#endif
-       {
+       } else {
                for (i = 0; i < sp->config.tx_fifo_num; i++)
                        sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_STOP;
                netif_stop_queue(sp->dev);
@@ -561,12 +558,9 @@ static inline void s2io_stop_all_tx_queue(struct s2io_nic *sp)
 
 static inline void s2io_stop_tx_queue(struct s2io_nic *sp, int fifo_no)
 {
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        if (sp->config.multiq)
                netif_stop_subqueue(sp->dev, fifo_no);
-       else
-#endif
-       {
+       else {
                sp->mac_control.fifos[fifo_no].queue_state =
                        FIFO_QUEUE_STOP;
                netif_stop_queue(sp->dev);
@@ -576,13 +570,10 @@ static inline void s2io_stop_tx_queue(struct s2io_nic *sp, int fifo_no)
 static inline void s2io_start_all_tx_queue(struct s2io_nic *sp)
 {
        int i;
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        if (sp->config.multiq) {
                for (i = 0; i < sp->config.tx_fifo_num; i++)
                        netif_start_subqueue(sp->dev, i);
-       } else
-#endif
-       {
+       } else {
                for (i = 0; i < sp->config.tx_fifo_num; i++)
                        sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START;
                netif_start_queue(sp->dev);
@@ -591,12 +582,9 @@ static inline void s2io_start_all_tx_queue(struct s2io_nic *sp)
 
 static inline void s2io_start_tx_queue(struct s2io_nic *sp, int fifo_no)
 {
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        if (sp->config.multiq)
                netif_start_subqueue(sp->dev, fifo_no);
-       else
-#endif
-       {
+       else {
                sp->mac_control.fifos[fifo_no].queue_state =
                        FIFO_QUEUE_START;
                netif_start_queue(sp->dev);
@@ -606,13 +594,10 @@ static inline void s2io_start_tx_queue(struct s2io_nic *sp, int fifo_no)
 static inline void s2io_wake_all_tx_queue(struct s2io_nic *sp)
 {
        int i;
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        if (sp->config.multiq) {
                for (i = 0; i < sp->config.tx_fifo_num; i++)
                        netif_wake_subqueue(sp->dev, i);
-       } else
-#endif
-       {
+       } else {
                for (i = 0; i < sp->config.tx_fifo_num; i++)
                        sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START;
                netif_wake_queue(sp->dev);
@@ -623,13 +608,10 @@ static inline void s2io_wake_tx_queue(
        struct fifo_info *fifo, int cnt, u8 multiq)
 {
 
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        if (multiq) {
                if (cnt && __netif_subqueue_stopped(fifo->dev, fifo->fifo_no))
                        netif_wake_subqueue(fifo->dev, fifo->fifo_no);
-       } else
-#endif
-       if (cnt && (fifo->queue_state == FIFO_QUEUE_STOP)) {
+       } else if (cnt && (fifo->queue_state == FIFO_QUEUE_STOP)) {
                if (netif_queue_stopped(fifo->dev)) {
                        fifo->queue_state = FIFO_QUEUE_START;
                        netif_wake_queue(fifo->dev);
@@ -4189,15 +4171,12 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
                        return NETDEV_TX_LOCKED;
        }
 
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        if (sp->config.multiq) {
                if (__netif_subqueue_stopped(dev, fifo->fifo_no)) {
                        spin_unlock_irqrestore(&fifo->tx_lock, flags);
                        return NETDEV_TX_BUSY;
                }
-       } else
-#endif
-       if (unlikely(fifo->queue_state == FIFO_QUEUE_STOP)) {
+       } else if (unlikely(fifo->queue_state == FIFO_QUEUE_STOP)) {
                if (netif_queue_stopped(dev)) {
                        spin_unlock_irqrestore(&fifo->tx_lock, flags);
                        return NETDEV_TX_BUSY;
@@ -7633,12 +7612,6 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type,
                DBG_PRINT(ERR_DBG, "tx fifos\n");
        }
 
-#ifndef CONFIG_NETDEVICES_MULTIQUEUE
-       if (multiq) {
-               DBG_PRINT(ERR_DBG, "s2io: Multiqueue support not enabled\n");
-               multiq = 0;
-       }
-#endif
        if (multiq)
                *dev_multiq = multiq;
 
@@ -7783,12 +7756,10 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
                pci_disable_device(pdev);
                return -ENODEV;
        }
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        if (dev_multiq)
                dev = alloc_etherdev_mq(sizeof(struct s2io_nic), tx_fifo_num);
        else
-#endif
-       dev = alloc_etherdev(sizeof(struct s2io_nic));
+               dev = alloc_etherdev(sizeof(struct s2io_nic));
        if (dev == NULL) {
                DBG_PRINT(ERR_DBG, "Device allocation failed\n");
                pci_disable_device(pdev);
@@ -7979,10 +7950,8 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
                dev->features |= NETIF_F_UFO;
                dev->features |= NETIF_F_HW_CSUM;
        }
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        if (config->multiq)
                dev->features |= NETIF_F_MULTI_QUEUE;
-#endif
        dev->tx_timeout = &s2io_tx_watchdog;
        dev->watchdog_timeo = WATCH_DOG_TIMEOUT;
        INIT_WORK(&sp->rst_timer_task, s2io_restart_nic);

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index c8d5f128858dde466e5da96cefcd3c8e7ee0b8d5..e2d931f9b700b4927f3742f64d98d9354e2b341e 100644 (file)
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1043,9 +1043,7 @@ static inline int netif_running(const struct net_device *dev)
  */
 static inline void netif_start_subqueue(struct net_device *dev, u16 queue_index)
 {
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        clear_bit(__LINK_STATE_XOFF, &dev->egress_subqueue[queue_index].state);
-#endif
 }
 
 /**
@@ -1057,13 +1055,11 @@ static inline void netif_start_subqueue(struct net_device *dev, u16 queue_index)
  */
 static inline void netif_stop_subqueue(struct net_device *dev, u16 queue_index)
 {
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
 #ifdef CONFIG_NETPOLL_TRAP
        if (netpoll_trap())
                return;
 #endif
        set_bit(__LINK_STATE_XOFF, &dev->egress_subqueue[queue_index].state);
-#endif
 }
 
 /**
@@ -1076,12 +1072,8 @@ static inline void netif_stop_subqueue(struct net_device *dev, u16 queue_index)
 static inline int __netif_subqueue_stopped(const struct net_device *dev,
                                         u16 queue_index)
 {
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        return test_bit(__LINK_STATE_XOFF,
                        &dev->egress_subqueue[queue_index].state);
-#else
-       return 0;
-#endif
 }
 
 static inline int netif_subqueue_stopped(const struct net_device *dev,
@@ -1099,7 +1091,6 @@ static inline int netif_subqueue_stopped(const struct net_device *dev,
  */
 static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index)
 {
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
 #ifdef CONFIG_NETPOLL_TRAP
        if (netpoll_trap())
                return;
@@ -1107,7 +1098,6 @@ static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index)
        if (test_and_clear_bit(__LINK_STATE_XOFF,
                               &dev->egress_subqueue[queue_index].state))
                __netif_schedule(&dev->tx_queue);
-#endif
 }
 
 /**
@@ -1119,11 +1109,7 @@ static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index)
  */
 static inline int netif_is_multiqueue(const struct net_device *dev)
 {
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        return (!!(NETIF_F_MULTI_QUEUE & dev->features));
-#else
-       return 0;
-#endif
 }
 
 /* Use this variant when it is known for sure that it

diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 2220b9e2dab095b6c2c0bea11fe1e0f4417145b4..8f10e3d08fd9ab910ab6fe5def8fe1e321dbf34f 100644 (file)
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -305,9 +305,7 @@ struct sk_buff {
 #endif
 
        int                     iif;
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        __u16                   queue_mapping;
-#endif
 #ifdef CONFIG_NET_SCHED
        __u16                   tc_index;       /* traffic control index */
 #ifdef CONFIG_NET_CLS_ACT
@@ -1671,25 +1669,17 @@ static inline void skb_init_secmark(struct sk_buff *skb)
 
 static inline void skb_set_queue_mapping(struct sk_buff *skb, u16 queue_mapping)
 {
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        skb->queue_mapping = queue_mapping;
-#endif
 }
 
 static inline u16 skb_get_queue_mapping(struct sk_buff *skb)
 {
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        return skb->queue_mapping;
-#else
-       return 0;
-#endif
 }
 
 static inline void skb_copy_queue_mapping(struct sk_buff *to, const struct sk_buff *from)
 {
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
        to->queue_mapping = from->queue_mapping;
-#endif
 }
 
 static inline int skb_is_gso(const struct sk_buff *skb)

diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index 40f1add17753d83f323a1233a288525177037912..d2038418e2bd57d1cc687bc1cecf5f95aa57f396 100644 (file)
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -15,14 +15,11 @@ config MAC80211_QOS
        def_bool y
        depends on MAC80211
        depends on NET_SCHED
-       depends on NETDEVICES_MULTIQUEUE
 
 comment "QoS/HT support disabled"
        depends on MAC80211 && !MAC80211_QOS
 comment "QoS/HT support needs CONFIG_NET_SCHED"
        depends on MAC80211 && !NET_SCHED
-comment "QoS/HT support needs CONFIG_NETDEVICES_MULTIQUEUE"
-       depends on MAC80211 && !NETDEVICES_MULTIQUEUE
 
 menu "Rate control algorithm selection"
        depends on MAC80211 != n