]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
rtc: rtc-dm355evm driver
authorDavid Brownell <dbrownell@users.sourceforge.net>
Wed, 4 Feb 2009 23:12:01 +0000 (15:12 -0800)
committerLinus Torvalds <torvalds@linux-foundation.org>
Thu, 5 Feb 2009 20:56:46 +0000 (12:56 -0800)
Simple RTC driver for the MSP430 firmware on the DM355 EVM board.  Other
than not supporting atomic reads/writes of all four bytes, this is
reasonable as a basic no-alarm RTC.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/rtc/Kconfig
drivers/rtc/Makefile
drivers/rtc/rtc-dm355evm.c [new file with mode: 0644]

index cced4d108319600c24321021a3740a003df4cf84..81450fbd8b1246c3bca1841f8cd314af79264081 100644 (file)
@@ -241,6 +241,12 @@ config RTC_DRV_M41T80_WDT
          If you say Y here you will get support for the
          watchdog timer in the ST M41T60 and M41T80 RTC chips series.
 
+config RTC_DRV_DM355EVM
+       tristate "TI DaVinci DM355 EVM RTC"
+       depends on MFD_DM355EVM_MSP
+       help
+         Supports the RTC firmware in the MSP430 on the DM355 EVM.
+
 config RTC_DRV_TWL92330
        boolean "TI TWL92330/Menelaus"
        depends on MENELAUS
index 6e28021abb9d9494cf65b839de6f23a07014df91..0e697aa51caa5a2d8f891772ed793dd1d69d2f45 100644 (file)
@@ -23,6 +23,7 @@ obj-$(CONFIG_RTC_DRV_AT91SAM9)        += rtc-at91sam9.o
 obj-$(CONFIG_RTC_DRV_AU1XXX)   += rtc-au1xxx.o
 obj-$(CONFIG_RTC_DRV_BFIN)     += rtc-bfin.o
 obj-$(CONFIG_RTC_DRV_CMOS)     += rtc-cmos.o
+obj-$(CONFIG_RTC_DRV_DM355EVM) += rtc-dm355evm.o
 obj-$(CONFIG_RTC_DRV_DS1216)   += rtc-ds1216.o
 obj-$(CONFIG_RTC_DRV_DS1286)   += rtc-ds1286.o
 obj-$(CONFIG_RTC_DRV_DS1302)   += rtc-ds1302.o
diff --git a/drivers/rtc/rtc-dm355evm.c b/drivers/rtc/rtc-dm355evm.c
new file mode 100644 (file)
index 0000000..58d4e18
--- /dev/null
@@ -0,0 +1,175 @@
+/*
+ * rtc-dm355evm.c - access battery-backed counter in MSP430 firmware
+ *
+ * Copyright (c) 2008 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+
+#include <linux/i2c/dm355evm_msp.h>
+
+
+/*
+ * The MSP430 firmware on the DM355 EVM uses a watch crystal to feed
+ * a 1 Hz counter.  When a backup battery is supplied, that makes a
+ * reasonable RTC for applications where alarms and non-NTP drift
+ * compensation aren't important.
+ *
+ * The only real glitch is the inability to read or write all four
+ * counter bytes atomically:  the count may increment in the middle
+ * of an operation, causing trouble when the LSB rolls over.
+ *
+ * This driver was tested with firmware revision A4.
+ */
+union evm_time {
+       u8      bytes[4];
+       u32     value;
+};
+
+static int dm355evm_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+       union evm_time  time;
+       int             status;
+       int             tries = 0;
+
+       do {
+               /*
+                * Read LSB(0) to MSB(3) bytes.  Defend against the counter
+                * rolling over by re-reading until the value is stable,
+                * and assuming the four reads take at most a few seconds.
+                */
+               status = dm355evm_msp_read(DM355EVM_MSP_RTC_0);
+               if (status < 0)
+                       return status;
+               if (tries && time.bytes[0] == status)
+                       break;
+               time.bytes[0] = status;
+
+               status = dm355evm_msp_read(DM355EVM_MSP_RTC_1);
+               if (status < 0)
+                       return status;
+               if (tries && time.bytes[1] == status)
+                       break;
+               time.bytes[1] = status;
+
+               status = dm355evm_msp_read(DM355EVM_MSP_RTC_2);
+               if (status < 0)
+                       return status;
+               if (tries && time.bytes[2] == status)
+                       break;
+               time.bytes[2] = status;
+
+               status = dm355evm_msp_read(DM355EVM_MSP_RTC_3);
+               if (status < 0)
+                       return status;
+               if (tries && time.bytes[3] == status)
+                       break;
+               time.bytes[3] = status;
+
+       } while (++tries < 5);
+
+       dev_dbg(dev, "read timestamp %08x\n", time.value);
+
+       rtc_time_to_tm(le32_to_cpu(time.value), tm);
+       return 0;
+}
+
+static int dm355evm_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+       union evm_time  time;
+       unsigned long   value;
+       int             status;
+
+       rtc_tm_to_time(tm, &value);
+       time.value = cpu_to_le32(value);
+
+       dev_dbg(dev, "write timestamp %08x\n", time.value);
+
+       /*
+        * REVISIT handle non-atomic writes ... maybe just retry until
+        * byte[1] sticks (no rollover)?
+        */
+       status = dm355evm_msp_write(time.bytes[0], DM355EVM_MSP_RTC_0);
+       if (status < 0)
+               return status;
+
+       status = dm355evm_msp_write(time.bytes[1], DM355EVM_MSP_RTC_1);
+       if (status < 0)
+               return status;
+
+       status = dm355evm_msp_write(time.bytes[2], DM355EVM_MSP_RTC_2);
+       if (status < 0)
+               return status;
+
+       status = dm355evm_msp_write(time.bytes[3], DM355EVM_MSP_RTC_3);
+       if (status < 0)
+               return status;
+
+       return 0;
+}
+
+static struct rtc_class_ops dm355evm_rtc_ops = {
+       .read_time      = dm355evm_rtc_read_time,
+       .set_time       = dm355evm_rtc_set_time,
+};
+
+/*----------------------------------------------------------------------*/
+
+static int __devinit dm355evm_rtc_probe(struct platform_device *pdev)
+{
+       struct rtc_device *rtc;
+
+       rtc = rtc_device_register(pdev->name,
+                                 &pdev->dev, &dm355evm_rtc_ops, THIS_MODULE);
+       if (IS_ERR(rtc)) {
+               dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
+                       PTR_ERR(rtc));
+               return PTR_ERR(rtc);
+       }
+       platform_set_drvdata(pdev, rtc);
+
+       return 0;
+}
+
+static int __devexit dm355evm_rtc_remove(struct platform_device *pdev)
+{
+       struct rtc_device *rtc = platform_get_drvdata(pdev);
+
+       rtc_device_unregister(rtc);
+       platform_set_drvdata(pdev, NULL);
+       return 0;
+}
+
+/*
+ * I2C is used to talk to the MSP430, but this platform device is
+ * exposed by an MFD driver that manages I2C communications.
+ */
+static struct platform_driver rtc_dm355evm_driver = {
+       .probe          = dm355evm_rtc_probe,
+       .remove         = __devexit_p(dm355evm_rtc_remove),
+       .driver         = {
+               .owner  = THIS_MODULE,
+               .name   = "rtc-dm355evm",
+       },
+};
+
+static int __init dm355evm_rtc_init(void)
+{
+       return platform_driver_register(&rtc_dm355evm_driver);
+}
+module_init(dm355evm_rtc_init);
+
+static void __exit dm355evm_rtc_exit(void)
+{
+       platform_driver_unregister(&rtc_dm355evm_driver);
+}
+module_exit(dm355evm_rtc_exit);
+
+MODULE_LICENSE("GPL");