lxfb: rearrange/rename MSR bitfields

Finally, move the MSR bitfields around in lxfb.h, and rename them.  Alas, most
of that crap appears to be undocumented.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/video/geode/lxfb.h b/drivers/video/geode/lxfb.h
index 0e3cb9191009a3a8ed1583c27f4ba191803fc9aa..b3fbc56ccbd7ae5f81b6e29f04526dba56ef6185 100644 (file)
--- a/drivers/video/geode/lxfb.h
+++ b/drivers/video/geode/lxfb.h
@@ -27,31 +27,6 @@ int lx_blank_display(struct fb_info *, int);
 void lx_set_palette_reg(struct fb_info *, unsigned int, unsigned int,
                        unsigned int, unsigned int);
 
-/* MSRS */
-
-#define GLCP_DOTPLL_RESET    (1 << 0)
-#define GLCP_DOTPLL_BYPASS   (1 << 15)
-#define GLCP_DOTPLL_HALFPIX  (1 << 24)
-#define GLCP_DOTPLL_LOCK     (1 << 25)
-
-#define DF_CONFIG_OUTPUT_MASK       0x38
-#define DF_OUTPUT_PANEL             0x08
-#define DF_OUTPUT_CRT               0x00
-#define DF_SIMULTANEOUS_CRT_AND_FP  (1 << 15)
-
-#define DF_DEFAULT_TFT_PAD_SEL_LOW  0xDFFFFFFF
-#define DF_DEFAULT_TFT_PAD_SEL_HIGH 0x0000003F
-
-#define DC_SPARE_DISABLE_CFIFO_HGO         0x00000800
-#define DC_SPARE_VFIFO_ARB_SELECT          0x00000400
-#define DC_SPARE_WM_LPEN_OVRD              0x00000200
-#define DC_SPARE_LOAD_WM_LPEN_MASK         0x00000100
-#define DC_SPARE_DISABLE_INIT_VID_PRI      0x00000080
-#define DC_SPARE_DISABLE_VFIFO_WM          0x00000040
-#define DC_SPARE_DISABLE_CWD_CHECK         0x00000020
-#define DC_SPARE_PIX8_PAN_FIX              0x00000010
-#define DC_SPARE_FIRST_REQ_MASK            0x00000002
-
 
 /* Graphics Processor registers (table 6-29 from the data book) */
 enum gp_registers {
@@ -390,4 +365,31 @@ static inline void write_fp(struct lxfb_par *par, int reg, uint32_t val)
        writel(val, par->vp_regs + 8*reg + VP_FP_START);
 }
 
+
+/* MSRs are defined in asm/geode.h; their bitfields are here */
+
+#define MSR_GLCP_DOTPLL_LOCK           (1 << 25)       /* r/o */
+#define MSR_GLCP_DOTPLL_HALFPIX                (1 << 24)
+#define MSR_GLCP_DOTPLL_BYPASS         (1 << 15)
+#define MSR_GLCP_DOTPLL_DOTRESET       (1 << 0)
+
+/* note: this is actually the VP's GLD_MSR_CONFIG */
+#define MSR_LX_GLD_MSR_CONFIG_FMT      ((1 << 3) | (1 << 4) | (1 << 5))
+#define MSR_LX_GLD_MSR_CONFIG_FMT_FP   (1 << 3)
+#define MSR_LX_GLD_MSR_CONFIG_FMT_CRT  (0)
+#define MSR_LX_GLD_MSR_CONFIG_FPC      (1 << 15)       /* FP *and* CRT */
+
+#define MSR_LX_MSR_PADSEL_TFT_SEL_LOW  0xDFFFFFFF      /* ??? */
+#define MSR_LX_MSR_PADSEL_TFT_SEL_HIGH 0x0000003F      /* ??? */
+
+#define MSR_LX_SPARE_MSR_DIS_CFIFO_HGO (1 << 11)       /* undocumented */
+#define MSR_LX_SPARE_MSR_VFIFO_ARB_SEL (1 << 10)       /* undocumented */
+#define MSR_LX_SPARE_MSR_WM_LPEN_OVRD  (1 << 9)        /* undocumented */
+#define MSR_LX_SPARE_MSR_LOAD_WM_LPEN_M        (1 << 8)        /* undocumented */
+#define MSR_LX_SPARE_MSR_DIS_INIT_V_PRI        (1 << 7)        /* undocumented */
+#define MSR_LX_SPARE_MSR_DIS_VIFO_WM   (1 << 6)
+#define MSR_LX_SPARE_MSR_DIS_CWD_CHECK (1 << 5)        /* undocumented */
+#define MSR_LX_SPARE_MSR_PIX8_PAN_FIX  (1 << 4)        /* undocumented */
+#define MSR_LX_SPARE_MSR_FIRST_REQ_MASK        (1 << 1)        /* undocumented */
+
 #endif

diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/geode/lxfb_ops.c
index 7be6f578e87e1a0017e00deff5bb8113fa165ebf..a68def88c92b8d0b3427901ce25e4eb438804ee1 100644 (file)
--- a/drivers/video/geode/lxfb_ops.c
+++ b/drivers/video/geode/lxfb_ops.c
@@ -154,12 +154,12 @@ static void lx_set_dotpll(u32 pllval)
 
        rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
 
-       if ((dotpll_lo & GLCP_DOTPLL_LOCK) && (dotpll_hi == pllval))
+       if ((dotpll_lo & MSR_GLCP_DOTPLL_LOCK) && (dotpll_hi == pllval))
                return;
 
        dotpll_hi = pllval;
-       dotpll_lo &= ~(GLCP_DOTPLL_BYPASS | GLCP_DOTPLL_HALFPIX);
-       dotpll_lo |= GLCP_DOTPLL_RESET;
+       dotpll_lo &= ~(MSR_GLCP_DOTPLL_BYPASS | MSR_GLCP_DOTPLL_HALFPIX);
+       dotpll_lo |= MSR_GLCP_DOTPLL_DOTRESET;
 
        wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
 
@@ -171,13 +171,13 @@ static void lx_set_dotpll(u32 pllval)
 
        for (i = 0; i < 1000; i++) {
                rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
-               if (dotpll_lo & GLCP_DOTPLL_LOCK)
+               if (dotpll_lo & MSR_GLCP_DOTPLL_LOCK)
                        break;
        }
 
        /* Clear the reset bit */
 
-       dotpll_lo &= ~GLCP_DOTPLL_RESET;
+       dotpll_lo &= ~MSR_GLCP_DOTPLL_DOTRESET;
        wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
 }
 
@@ -299,8 +299,8 @@ static void lx_graphics_enable(struct fb_info *info)
                write_fp(par, FP_PT2, FP_PT2_SCRC);
                write_fp(par, FP_DFC, FP_DFC_BC);
 
-               msrlo = DF_DEFAULT_TFT_PAD_SEL_LOW;
-               msrhi = DF_DEFAULT_TFT_PAD_SEL_HIGH;
+               msrlo = MSR_LX_MSR_PADSEL_TFT_SEL_LOW;
+               msrhi = MSR_LX_MSR_PADSEL_TFT_SEL_HIGH;
 
                wrmsr(MSR_LX_MSR_PADSEL, msrlo, msrhi);
        }
@@ -366,18 +366,17 @@ void lx_set_mode(struct fb_info *info)
        /* Set output mode */
 
        rdmsrl(MSR_LX_GLD_MSR_CONFIG, msrval);
-       msrval &= ~DF_CONFIG_OUTPUT_MASK;
+       msrval &= ~MSR_LX_GLD_MSR_CONFIG_FMT;
 
        if (par->output & OUTPUT_PANEL) {
-               msrval |= DF_OUTPUT_PANEL;
+               msrval |= MSR_LX_GLD_MSR_CONFIG_FMT_FP;
 
                if (par->output & OUTPUT_CRT)
-                       msrval |= DF_SIMULTANEOUS_CRT_AND_FP;
+                       msrval |= MSR_LX_GLD_MSR_CONFIG_FPC;
                else
-                       msrval &= ~DF_SIMULTANEOUS_CRT_AND_FP;
-       } else {
-               msrval |= DF_OUTPUT_CRT;
-       }
+                       msrval &= ~MSR_LX_GLD_MSR_CONFIG_FPC;
+       } else
+               msrval |= MSR_LX_GLD_MSR_CONFIG_FMT_CRT;
 
        wrmsrl(MSR_LX_GLD_MSR_CONFIG, msrval);
 
@@ -429,10 +428,12 @@ void lx_set_mode(struct fb_info *info)
 
        rdmsrl(MSR_LX_SPARE_MSR, msrval);
 
-       msrval &= ~(DC_SPARE_DISABLE_CFIFO_HGO | DC_SPARE_VFIFO_ARB_SELECT |
-                   DC_SPARE_LOAD_WM_LPEN_MASK | DC_SPARE_WM_LPEN_OVRD |
-                   DC_SPARE_DISABLE_INIT_VID_PRI | DC_SPARE_DISABLE_VFIFO_WM);
-       msrval |= DC_SPARE_DISABLE_VFIFO_WM | DC_SPARE_DISABLE_INIT_VID_PRI;
+       msrval &= ~(MSR_LX_SPARE_MSR_DIS_CFIFO_HGO
+                       | MSR_LX_SPARE_MSR_VFIFO_ARB_SEL
+                       | MSR_LX_SPARE_MSR_LOAD_WM_LPEN_M
+                       | MSR_LX_SPARE_MSR_WM_LPEN_OVRD);
+       msrval |= MSR_LX_SPARE_MSR_DIS_VIFO_WM |
+                       MSR_LX_SPARE_MSR_DIS_INIT_V_PRI;
        wrmsrl(MSR_LX_SPARE_MSR, msrval);
 
        gcfg = DC_GENERAL_CFG_DFLE;   /* Display fifo enable */