]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[MTD] [NAND] FSL-UPM: Add wait flags to support board/chip specific delays
authorWolfgang Grandegger <wg@grandegger.com>
Mon, 30 Mar 2009 10:02:43 +0000 (12:02 +0200)
committerDavid Woodhouse <David.Woodhouse@intel.com>
Mon, 6 Apr 2009 14:17:59 +0000 (07:17 -0700)
The NAND flash on the TQM8548_BE modules requires a short delay after
running the UPM pattern. The TQM8548_BE requires a further short delay
after writing out a buffer. Normally the R/B pin should be checked, but
it's not connected on the TQM8548_BE. The existing driver uses similar
fixed delay points. To manage these extra delays in a more general way,
I introduced the "fsl,ump-wait-flags" property allowing the board-
specific driver to specify various types of extra delay.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
drivers/mtd/nand/fsl_upm.c

index 430de6de9ac6655e472110a68c5fbf4134bfe07f..d120cd8d72674919fc453870978765ebf95d9a00 100644 (file)
 #include <linux/io.h>
 #include <asm/fsl_lbc.h>
 
+#define FSL_UPM_WAIT_RUN_PATTERN  0x1
+#define FSL_UPM_WAIT_WRITE_BYTE   0x2
+#define FSL_UPM_WAIT_WRITE_BUFFER 0x4
+
 struct fsl_upm_nand {
        struct device *dev;
        struct mtd_info mtd;
@@ -41,6 +45,7 @@ struct fsl_upm_nand {
        uint32_t mchip_count;
        uint32_t mchip_number;
        int chip_delay;
+       uint32_t wait_flags;
 };
 
 #define to_fsl_upm_nand(mtd) container_of(mtd, struct fsl_upm_nand, mtd)
@@ -96,7 +101,8 @@ static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
                fun->mchip_offsets[fun->mchip_number];
        fsl_upm_run_pattern(&fun->upm, chip->IO_ADDR_R, mar);
 
-       fun_wait_rnb(fun);
+       if (fun->wait_flags & FSL_UPM_WAIT_RUN_PATTERN)
+               fun_wait_rnb(fun);
 }
 
 static void fun_select_chip(struct mtd_info *mtd, int mchip_nr)
@@ -138,8 +144,11 @@ static void fun_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
 
        for (i = 0; i < len; i++) {
                out_8(fun->chip.IO_ADDR_W, buf[i]);
-               fun_wait_rnb(fun);
+               if (fun->wait_flags & FSL_UPM_WAIT_WRITE_BYTE)
+                       fun_wait_rnb(fun);
        }
+       if (fun->wait_flags & FSL_UPM_WAIT_WRITE_BUFFER)
+               fun_wait_rnb(fun);
 }
 
 static int __devinit fun_chip_init(struct fsl_upm_nand *fun,
@@ -285,6 +294,13 @@ static int __devinit fun_probe(struct of_device *ofdev,
        else
                fun->chip_delay = 50;
 
+       prop = of_get_property(ofdev->node, "fsl,upm-wait-flags", &size);
+       if (prop && size == sizeof(uint32_t))
+               fun->wait_flags = *prop;
+       else
+               fun->wait_flags = FSL_UPM_WAIT_RUN_PATTERN |
+                                 FSL_UPM_WAIT_WRITE_BYTE;
+
        fun->io_base = devm_ioremap_nocache(&ofdev->dev, io_res.start,
                                            io_res.end - io_res.start + 1);
        if (!fun->io_base) {