[POWERPC] Add interrupt resource for RTC CMOS driver

The RTC CMOS driver expects the interrupt to be a resource of the platform
device.  Use a fixed interrupt value of 8 since on PPC if we are using this
its off an i8259 which we ensure has interrupt numbers 0..15.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c
index e276048b8c5faa6053717ae2e05379b82db6461e..0c9ac7ee08fbf98e00ae592884a5b85411907575 100644 (file)
--- a/arch/powerpc/sysdev/rtc_cmos_setup.c
+++ b/arch/powerpc/sysdev/rtc_cmos_setup.c
@@ -20,14 +20,16 @@ static int  __init add_rtc(void)
 {
        struct device_node *np;
        struct platform_device *pd;
-       struct resource res;
+       struct resource res[2];
        int ret;
 
+       memset(&res, 0, sizeof(res));
+
        np = of_find_compatible_node(NULL, NULL, "pnpPNP,b00");
        if (!np)
                return -ENODEV;
 
-       ret = of_address_to_resource(np, 0, &res);
+       ret = of_address_to_resource(np, 0, &res[0]);
        of_node_put(np);
        if (ret)
                return ret;
@@ -36,11 +38,18 @@ static int  __init add_rtc(void)
         * RTC_PORT(x) is hardcoded in asm/mc146818rtc.h.  Verify that the
         * address provided by the device node matches.
         */
-       if (res.start != RTC_PORT(0))
+       if (res[0].start != RTC_PORT(0))
                return -EINVAL;
 
+       /* Use a fixed interrupt value of 8 since on PPC if we are using this
+        * its off an i8259 which we ensure has interrupt numbers 0..15. */
+       res[1].start = 8;
+       res[1].end = 8;
+       res[1].flags = IORESOURCE_IRQ;
+
        pd = platform_device_register_simple("rtc_cmos", -1,
-                                            &res, 1);
+                                            &res[0], 2);
+
        if (IS_ERR(pd))
                return PTR_ERR(pd);