more than one without conflict. If you don't need UML networking,
say N.
+config UML_NET_VDE
+ bool "VDE transport"
+ depends on UML_NET
+ help
+ This User-Mode Linux network transport allows one or more running
+ UMLs on a single host to communicate with each other and also
+ with the rest of the world using Virtual Distributed Ethernet,
+ an improved fork of uml_switch.
+
+ You must have libvdeplug installed in order to build the vde
+ transport into UML.
+
+ To use this form of networking, you will need to run vde_switch
+ on the host.
+
+ For more information, see <http://wiki.virtualsquare.org/>
+ That site has a good overview of what VDE is and also examples
+ of the UML command line to use to enable VDE networking.
+
+ If you need UML networking with VDE,
+ say Y.
+
config UML_NET_MCAST
bool "Multicast transport"
depends on UML_NET
LDFLAGS_pcap.o := -r $(shell $(CC) $(CFLAGS) -print-file-name=libpcap.a)
-targets := pcap_kern.o pcap_user.o
+LDFLAGS_vde.o := -r $(shell $(CC) $(CFLAGS) -print-file-name=libvdeplug.a)
+
+targets := pcap_kern.o pcap_user.o vde_kern.o vde_user.o
$(obj)/pcap.o: $(obj)/pcap_kern.o $(obj)/pcap_user.o
$(LD) -r -dp -o $@ $^ $(LDFLAGS) $(LDFLAGS_pcap.o)
+
+$(obj)/vde.o: $(obj)/vde_kern.o $(obj)/vde_user.o
+ $(LD) -r -dp -o $@ $^ $(LDFLAGS) $(LDFLAGS_vde.o)
+
#XXX: The call below does not work because the flags are added before the
# object name, so nothing from the library gets linked.
#$(call if_changed,ld)
obj-$(CONFIG_UML_NET_SLIP) += slip.o slip_common.o
obj-$(CONFIG_UML_NET_SLIRP) += slirp.o slip_common.o
obj-$(CONFIG_UML_NET_DAEMON) += daemon.o
+obj-$(CONFIG_UML_NET_VDE) += vde.o
obj-$(CONFIG_UML_NET_MCAST) += mcast.o
obj-$(CONFIG_UML_NET_PCAP) += pcap.o
obj-$(CONFIG_UML_NET) += net.o
obj-$(CONFIG_UML_RANDOM) += random.o
# pcap_user.o must be added explicitly.
-USER_OBJS := fd.o null.o pty.o tty.o xterm.o slip_common.o pcap_user.o
+USER_OBJS := fd.o null.o pty.o tty.o xterm.o slip_common.o pcap_user.o vde_user.o
include arch/um/scripts/Makefile.rules
--- /dev/null
+/*
+ * Copyright (C) 2007 Luca Bigliardi (shammash@artha.org).
+ * Licensed under the GPL.
+ */
+
+#ifndef __UM_VDE_H__
+#define __UM_VDE_H__
+
+struct vde_data {
+ char *vde_switch;
+ char *descr;
+ void *args;
+ void *conn;
+ void *dev;
+};
+
+struct vde_init {
+ char *vde_switch;
+ char *descr;
+ int port;
+ char *group;
+ int mode;
+};
+
+extern const struct net_user_info vde_user_info;
+
+extern void vde_init_libstuff(struct vde_data *vpri, struct vde_init *init);
+
+extern int vde_user_read(void *conn, void *buf, int len);
+extern int vde_user_write(void *conn, void *buf, int len);
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2007 Luca Bigliardi (shammash@artha.org).
+ * Licensed under the GPL.
+ *
+ * Transport usage:
+ * ethN=vde,<vde_switch>,<mac addr>,<port>,<group>,<mode>,<description>
+ *
+ */
+
+#include "linux/kernel.h"
+#include "linux/init.h"
+#include "linux/netdevice.h"
+#include "linux/etherdevice.h"
+#include "net_kern.h"
+#include "net_user.h"
+#include "vde.h"
+
+static void vde_init(struct net_device *dev, void *data)
+{
+ struct vde_init *init = data;
+ struct uml_net_private *pri;
+ struct vde_data *vpri;
+
+ pri = dev->priv;
+ vpri = (struct vde_data *) pri->user;
+
+ vpri->vde_switch = init->vde_switch;
+ vpri->descr = init->descr ? init->descr : "UML vde_transport";
+ vpri->args = NULL;
+ vpri->conn = NULL;
+ vpri->dev = dev;
+
+ printk(KERN_INFO "vde backend - %s, ", vpri->vde_switch ?
+ vpri->vde_switch : "(default socket)");
+
+ vde_init_libstuff(vpri, init);
+
+ printk(KERN_INFO "\n");
+}
+
+static int vde_read(int fd, struct sk_buff **skb, struct uml_net_private *lp)
+{
+ struct vde_data *pri = (struct vde_data *) &lp->user;
+
+ if (pri->conn != NULL) {
+ *skb = ether_adjust_skb(*skb, ETH_HEADER_OTHER);
+ if (*skb == NULL)
+ return -ENOMEM;
+
+ return vde_user_read(pri->conn, skb_mac_header(*skb),
+ (*skb)->dev->mtu + ETH_HEADER_OTHER);
+ }
+
+ printk(KERN_ERR "vde_read - we have no VDECONN to read from");
+ return -EBADF;
+}
+
+static int vde_write(int fd, struct sk_buff **skb, struct uml_net_private *lp)
+{
+ struct vde_data *pri = (struct vde_data *) &lp->user;
+
+ if (pri->conn != NULL)
+ return vde_user_write((void *)pri->conn, (*skb)->data,
+ (*skb)->len);
+
+ printk(KERN_ERR "vde_write - we have no VDECONN to write to");
+ return -EBADF;
+}
+
+static const struct net_kern_info vde_kern_info = {
+ .init = vde_init,
+ .protocol = eth_protocol,
+ .read = vde_read,
+ .write = vde_write,
+};
+
+static int vde_setup(char *str, char **mac_out, void *data)
+{
+ struct vde_init *init = data;
+ char *remain, *port_str = NULL, *mode_str = NULL, *last;
+
+ *init = ((struct vde_init)
+ { .vde_switch = NULL,
+ .descr = NULL,
+ .port = 0,
+ .group = NULL,
+ .mode = 0 });
+
+ remain = split_if_spec(str, &init->vde_switch, mac_out, &port_str,
+ &init->group, &mode_str, &init->descr, NULL);
+
+ if (remain != NULL)
+ printk(KERN_WARNING "vde_setup - Ignoring extra data :"
+ "'%s'\n", remain);
+
+ if (port_str != NULL) {
+ init->port = simple_strtoul(port_str, &last, 10);
+ if ((*last != '\0') || (last == port_str)) {
+ printk(KERN_ERR "vde_setup - Bad port : '%s'\n",
+ port_str);
+ return 0;
+ }
+ }
+
+ if (mode_str != NULL) {
+ init->mode = simple_strtoul(mode_str, &last, 8);
+ if ((*last != '\0') || (last == mode_str)) {
+ printk(KERN_ERR "vde_setup - Bad mode : '%s'\n",
+ mode_str);
+ return 0;
+ }
+ }
+
+ printk(KERN_INFO "Configured vde device: %s\n", init->vde_switch ?
+ init->vde_switch : "(default socket)");
+
+ return 1;
+}
+
+static struct transport vde_transport = {
+ .list = LIST_HEAD_INIT(vde_transport.list),
+ .name = "vde",
+ .setup = vde_setup,
+ .user = &vde_user_info,
+ .kern = &vde_kern_info,
+ .private_size = sizeof(struct vde_data),
+ .setup_size = sizeof(struct vde_init),
+};
+
+static int register_vde(void)
+{
+ register_transport(&vde_transport);
+ return 0;
+}
+
+late_initcall(register_vde);
--- /dev/null
+/*
+ * Copyright (C) 2007 Luca Bigliardi (shammash@artha.org).
+ * Licensed under the GPL.
+ */
+
+#include <errno.h>
+#include <unistd.h>
+#include <libvdeplug.h>
+#include "net_user.h"
+#include "kern_util.h"
+#include "kern_constants.h"
+#include "user.h"
+#include "os.h"
+#include "um_malloc.h"
+#include "vde.h"
+
+#define MAX_PACKET (ETH_MAX_PACKET + ETH_HEADER_OTHER)
+
+static int vde_user_init(void *data, void *dev)
+{
+ struct vde_data *pri = data;
+ VDECONN *conn = NULL;
+ int err = -EINVAL;
+
+ pri->dev = dev;
+
+ conn = vde_open(pri->vde_switch, pri->descr, pri->args);
+
+ if (conn == NULL) {
+ err = -errno;
+ printk(UM_KERN_ERR "vde_user_init: vde_open failed, "
+ "errno = %d\n", errno);
+ return err;
+ }
+
+ printk(UM_KERN_INFO "vde backend - connection opened\n");
+
+ pri->conn = conn;
+
+ return 0;
+}
+
+static int vde_user_open(void *data)
+{
+ struct vde_data *pri = data;
+
+ if (pri->conn != NULL)
+ return vde_datafd(pri->conn);
+
+ printk(UM_KERN_WARNING "vde_open - we have no VDECONN to open");
+ return -EINVAL;
+}
+
+static void vde_remove(void *data)
+{
+ struct vde_data *pri = data;
+
+ if (pri->conn != NULL) {
+ printk(UM_KERN_INFO "vde backend - closing connection\n");
+ vde_close(pri->conn);
+ pri->conn = NULL;
+ kfree(pri->args);
+ pri->args = NULL;
+ return;
+ }
+
+ printk(UM_KERN_WARNING "vde_remove - we have no VDECONN to remove");
+}
+
+static int vde_set_mtu(int mtu, void *data)
+{
+ return mtu;
+}
+
+const struct net_user_info vde_user_info = {
+ .init = vde_user_init,
+ .open = vde_user_open,
+ .close = NULL,
+ .remove = vde_remove,
+ .set_mtu = vde_set_mtu,
+ .add_address = NULL,
+ .delete_address = NULL,
+ .max_packet = MAX_PACKET - ETH_HEADER_OTHER
+};
+
+void vde_init_libstuff(struct vde_data *vpri, struct vde_init *init)
+{
+ struct vde_open_args *args;
+
+ vpri->args = kmalloc(sizeof(struct vde_open_args), UM_GFP_KERNEL);
+ if (vpri->args == NULL) {
+ printk(UM_KERN_ERR "vde_init_libstuff - vde_open_args"
+ "allocation failed");
+ return;
+ }
+
+ args = vpri->args;
+
+ args->port = init->port;
+ args->group = init->group;
+ args->mode = init->mode ? init->mode : 0700;
+
+ args->port ? printk(UM_KERN_INFO "port %d", args->port) :
+ printk(UM_KERN_INFO "undefined port");
+}
+
+int vde_user_read(void *conn, void *buf, int len)
+{
+ VDECONN *vconn = conn;
+ int rv;
+
+ if (vconn == NULL)
+ return 0;
+
+ rv = vde_recv(vconn, buf, len, 0);
+ if (rv < 0) {
+ if (errno == EAGAIN)
+ return 0;
+ return -errno;
+ }
+ else if (rv == 0)
+ return -ENOTCONN;
+
+ return rv;
+}
+
+int vde_user_write(void *conn, void *buf, int len)
+{
+ VDECONN *vconn = conn;
+
+ if (vconn == NULL)
+ return 0;
+
+ return vde_send(vconn, buf, len, 0);
+}
+
projects / linux-2.6-omap-h63xx.git / commitdiff