+++ /dev/null
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
- "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-
-<book id="TulipUserGuide">
- <bookinfo>
- <title>Tulip Driver User's Guide</title>
-
- <authorgroup>
- <author>
- <firstname>Jeff</firstname>
- <surname>Garzik</surname>
- <affiliation>
- <address>
- <email>jgarzik@pobox.com</email>
- </address>
- </affiliation>
- </author>
- </authorgroup>
-
- <copyright>
- <year>2001</year>
- <holder>Jeff Garzik</holder>
- </copyright>
-
- <legalnotice>
- <para>
- This documentation is free software; you can redistribute
- it and/or modify it under the terms of the GNU General Public
- License as published by the Free Software Foundation; either
- version 2 of the License, or (at your option) any later
- version.
- </para>
-
- <para>
- This program is distributed in the hope that it will be
- useful, but WITHOUT ANY WARRANTY; without even the implied
- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- See the GNU General Public License for more details.
- </para>
-
- <para>
- You should have received a copy of the GNU General Public
- License along with this program; if not, write to the Free
- Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- </para>
-
- <para>
- For more details see the file COPYING in the source
- distribution of Linux.
- </para>
- </legalnotice>
- </bookinfo>
-
- <toc></toc>
-
- <chapter id="intro">
- <title>Introduction</title>
-<para>
-The Tulip Ethernet Card Driver
-is maintained by Jeff Garzik (<email>jgarzik@pobox.com</email>).
-</para>
-
-<para>
-The Tulip driver was developed by Donald Becker and changed by
-Jeff Garzik, Takashi Manabe and a cast of thousands.
-</para>
-
-<para>
-For 2.4.x and later kernels, the Linux Tulip driver is available at
-<ulink url="http://sourceforge.net/projects/tulip/">http://sourceforge.net/projects/tulip/</ulink>
-</para>
-
-<para>
- This driver is for the Digital "Tulip" Ethernet adapter interface.
- It should work with most DEC 21*4*-based chips/ethercards, as well as
- with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and ASIX.
-</para>
-
-<para>
- The original author may be reached as becker@scyld.com, or C/O
- Scyld Computing Corporation,
- 410 Severn Ave., Suite 210,
- Annapolis MD 21403
-</para>
-
-<para>
- Additional information on Donald Becker's tulip.c
- is available at <ulink url="http://www.scyld.com/network/tulip.html">http://www.scyld.com/network/tulip.html</ulink>
-</para>
-
- </chapter>
-
- <chapter id="drvr-compat">
- <title>Driver Compatibility</title>
-
-<para>
-This device driver is designed for the DECchip "Tulip", Digital's
-single-chip ethernet controllers for PCI (now owned by Intel).
-Supported members of the family
-are the 21040, 21041, 21140, 21140A, 21142, and 21143. Similar work-alike
-chips from Lite-On, Macronics, ASIX, Compex and other listed below are also
-supported.
-</para>
-
-<para>
-These chips are used on at least 140 unique PCI board designs. The great
-number of chips and board designs supported is the reason for the
-driver size and complexity. Almost of the increasing complexity is in the
-board configuration and media selection code. There is very little
-increasing in the operational critical path length.
-</para>
- </chapter>
-
- <chapter id="board-settings">
- <title>Board-specific Settings</title>
-
-<para>
-PCI bus devices are configured by the system at boot time, so no jumpers
-need to be set on the board. The system BIOS preferably should assign the
-PCI INTA signal to an otherwise unused system IRQ line.
-</para>
-
-<para>
-Some boards have EEPROMs tables with default media entry. The factory default
-is usually "autoselect". This should only be overridden when using
-transceiver connections without link beat e.g. 10base2 or AUI, or (rarely!)
-for forcing full-duplex when used with old link partners that do not do
-autonegotiation.
-</para>
- </chapter>
-
- <chapter id="driver-operation">
- <title>Driver Operation</title>
-
-<sect1><title>Ring buffers</title>
-
-<para>
-The Tulip can use either ring buffers or lists of Tx and Rx descriptors.
-This driver uses statically allocated rings of Rx and Tx descriptors, set at
-compile time by RX/TX_RING_SIZE. This version of the driver allocates skbuffs
-for the Rx ring buffers at open() time and passes the skb->data field to the
-Tulip as receive data buffers. When an incoming frame is less than
-RX_COPYBREAK bytes long, a fresh skbuff is allocated and the frame is
-copied to the new skbuff. When the incoming frame is larger, the skbuff is
-passed directly up the protocol stack and replaced by a newly allocated
-skbuff.
-</para>
-
-<para>
-The RX_COPYBREAK value is chosen to trade-off the memory wasted by
-using a full-sized skbuff for small frames vs. the copying costs of larger
-frames. For small frames the copying cost is negligible (esp. considering
-that we are pre-loading the cache with immediately useful header
-information). For large frames the copying cost is non-trivial, and the
-larger copy might flush the cache of useful data. A subtle aspect of this
-choice is that the Tulip only receives into longword aligned buffers, thus
-the IP header at offset 14 isn't longword aligned for further processing.
-Copied frames are put into the new skbuff at an offset of "+2", thus copying
-has the beneficial effect of aligning the IP header and preloading the
-cache.
-</para>
-
-</sect1>
-
-<sect1><title>Synchronization</title>
-<para>
-The driver runs as two independent, single-threaded flows of control. One
-is the send-packet routine, which enforces single-threaded use by the
-dev->tbusy flag. The other thread is the interrupt handler, which is single
-threaded by the hardware and other software.
-</para>
-
-<para>
-The send packet thread has partial control over the Tx ring and 'dev->tbusy'
-flag. It sets the tbusy flag whenever it's queuing a Tx packet. If the next
-queue slot is empty, it clears the tbusy flag when finished otherwise it sets
-the 'tp->tx_full' flag.
-</para>
-
-<para>
-The interrupt handler has exclusive control over the Rx ring and records stats
-from the Tx ring. (The Tx-done interrupt can't be selectively turned off, so
-we can't avoid the interrupt overhead by having the Tx routine reap the Tx
-stats.) After reaping the stats, it marks the queue entry as empty by setting
-the 'base' to zero. Iff the 'tp->tx_full' flag is set, it clears both the
-tx_full and tbusy flags.
-</para>
-
-</sect1>
-
- </chapter>
-
- <chapter id="errata">
- <title>Errata</title>
-
-<para>
-The old DEC databooks were light on details.
-The 21040 databook claims that CSR13, CSR14, and CSR15 should each be the last
-register of the set CSR12-15 written. Hmmm, now how is that possible?
-</para>
-
-<para>
-The DEC SROM format is very badly designed not precisely defined, leading to
-part of the media selection junkheap below. Some boards do not have EEPROM
-media tables and need to be patched up. Worse, other boards use the DEC
-design kit media table when it isn't correct for their board.
-</para>
-
-<para>
-We cannot use MII interrupts because there is no defined GPIO pin to attach
-them. The MII transceiver status is polled using an kernel timer.
-</para>
- </chapter>
-
- <chapter id="changelog">
- <title>Driver Change History</title>
-
- <sect1><title>Version 0.9.14 (February 20, 2001)</title>
- <itemizedlist>
- <listitem><para>Fix PNIC problems (Manfred Spraul)</para></listitem>
- <listitem><para>Add new PCI id for Accton comet</para></listitem>
- <listitem><para>Support Davicom tulips</para></listitem>
- <listitem><para>Fix oops in eeprom parsing</para></listitem>
- <listitem><para>Enable workarounds for early PCI chipsets</para></listitem>
- <listitem><para>IA64, hppa csr0 support</para></listitem>
- <listitem><para>Support media types 5, 6</para></listitem>
- <listitem><para>Interpret a bit more of the 21142 SROM extended media type 3</para></listitem>
- <listitem><para>Add missing delay in eeprom reading</para></listitem>
- </itemizedlist>
- </sect1>
-
- <sect1><title>Version 0.9.11 (November 3, 2000)</title>
- <itemizedlist>
- <listitem><para>Eliminate extra bus accesses when sharing interrupts (prumpf)</para></listitem>
- <listitem><para>Barrier following ownership descriptor bit flip (prumpf)</para></listitem>
- <listitem><para>Endianness fixes for >14 addresses in setup frames (prumpf)</para></listitem>
- <listitem><para>Report link beat to kernel/userspace via netif_carrier_*. (kuznet)</para></listitem>
- <listitem><para>Better spinlocking in set_rx_mode.</para></listitem>
- <listitem><para>Fix I/O resource request failure error messages (DaveM catch)</para></listitem>
- <listitem><para>Handle DMA allocation failure.</para></listitem>
- </itemizedlist>
- </sect1>
-
- <sect1><title>Version 0.9.10 (September 6, 2000)</title>
- <itemizedlist>
- <listitem><para>Simple interrupt mitigation (via jamal)</para></listitem>
- <listitem><para>More PCI ids</para></listitem>
- </itemizedlist>
- </sect1>
-
- <sect1><title>Version 0.9.9 (August 11, 2000)</title>
- <itemizedlist>
- <listitem><para>More PCI ids</para></listitem>
- </itemizedlist>
- </sect1>
-
- <sect1><title>Version 0.9.8 (July 13, 2000)</title>
- <itemizedlist>
- <listitem><para>Correct signed/unsigned comparison for dummy frame index</para></listitem>
- <listitem><para>Remove outdated references to struct enet_statistics</para></listitem>
- </itemizedlist>
- </sect1>
-
- <sect1><title>Version 0.9.7 (June 17, 2000)</title>
- <itemizedlist>
- <listitem><para>Timer cleanups (Andrew Morton)</para></listitem>
- <listitem><para>Alpha compile fix (somebody?)</para></listitem>
- </itemizedlist>
- </sect1>
-
- <sect1><title>Version 0.9.6 (May 31, 2000)</title>
- <itemizedlist>
- <listitem><para>Revert 21143-related support flag patch</para></listitem>
- <listitem><para>Add HPPA/media-table debugging printk</para></listitem>
- </itemizedlist>
- </sect1>
-
- <sect1><title>Version 0.9.5 (May 30, 2000)</title>
- <itemizedlist>
- <listitem><para>HPPA support (willy@puffingroup)</para></listitem>
- <listitem><para>CSR6 bits and tulip.h cleanup (Chris Smith)</para></listitem>
- <listitem><para>Improve debugging messages a bit</para></listitem>
- <listitem><para>Add delay after CSR13 write in t21142_start_nway</para></listitem>
- <listitem><para>Remove unused ETHER_STATS code</para></listitem>
- <listitem><para>Convert 'extern inline' to 'static inline' in tulip.h (Chris Smith)</para></listitem>
- <listitem><para>Update DS21143 support flags in tulip_chip_info[]</para></listitem>
- <listitem><para>Use spin_lock_irq, not _irqsave/restore, in tulip_start_xmit()</para></listitem>
- <listitem><para>Add locking to set_rx_mode()</para></listitem>
- <listitem><para>Fix race with chip setting DescOwned bit (Hal Murray)</para></listitem>
- <listitem><para>Request 100% of PIO and MMIO resource space assigned to card</para></listitem>
- <listitem><para>Remove error message from pci_enable_device failure</para></listitem>
- </itemizedlist>
- </sect1>
-
- <sect1><title>Version 0.9.4.3 (April 14, 2000)</title>
- <itemizedlist>
- <listitem><para>mod_timer fix (Hal Murray)</para></listitem>
- <listitem><para>PNIC2 resuscitation (Chris Smith)</para></listitem>
- </itemizedlist>
- </sect1>
-
- <sect1><title>Version 0.9.4.2 (March 21, 2000)</title>
- <itemizedlist>
- <listitem><para>Fix 21041 CSR7, CSR13/14/15 handling</para></listitem>
- <listitem><para>Merge some PCI ids from tulip 0.91x</para></listitem>
- <listitem><para>Merge some HAS_xxx flags and flag settings from tulip 0.91x</para></listitem>
- <listitem><para>asm/io.h fix (submitted by many) and cleanup</para></listitem>
- <listitem><para>s/HAS_NWAY143/HAS_NWAY/</para></listitem>
- <listitem><para>Cleanup 21041 mode reporting</para></listitem>
- <listitem><para>Small code cleanups</para></listitem>
- </itemizedlist>
- </sect1>
-
- <sect1><title>Version 0.9.4.1 (March 18, 2000)</title>
- <itemizedlist>
- <listitem><para>Finish PCI DMA conversion (davem)</para></listitem>
- <listitem><para>Do not netif_start_queue() at end of tulip_tx_timeout() (kuznet)</para></listitem>
- <listitem><para>PCI DMA fix (kuznet)</para></listitem>
- <listitem><para>eeprom.c code cleanup</para></listitem>
- <listitem><para>Remove Xircom Tulip crud</para></listitem>
- </itemizedlist>
- </sect1>
- </chapter>
-
-</book>
+++ /dev/null
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
- "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-
-<book id="ViaAudioGuide">
- <bookinfo>
- <title>Via 686 Audio Driver for Linux</title>
-
- <authorgroup>
- <author>
- <firstname>Jeff</firstname>
- <surname>Garzik</surname>
- </author>
- </authorgroup>
-
- <copyright>
- <year>1999-2001</year>
- <holder>Jeff Garzik</holder>
- </copyright>
-
- <legalnotice>
- <para>
- This documentation is free software; you can redistribute
- it and/or modify it under the terms of the GNU General Public
- License as published by the Free Software Foundation; either
- version 2 of the License, or (at your option) any later
- version.
- </para>
-
- <para>
- This program is distributed in the hope that it will be
- useful, but WITHOUT ANY WARRANTY; without even the implied
- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- See the GNU General Public License for more details.
- </para>
-
- <para>
- You should have received a copy of the GNU General Public
- License along with this program; if not, write to the Free
- Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- </para>
-
- <para>
- For more details see the file COPYING in the source
- distribution of Linux.
- </para>
- </legalnotice>
- </bookinfo>
-
-<toc></toc>
-
- <chapter id="intro">
- <title>Introduction</title>
- <para>
- The Via VT82C686A "super southbridge" chips contain
- AC97-compatible audio logic which features dual 16-bit stereo
- PCM sound channels (full duplex), plus a third PCM channel intended for use
- in hardware-assisted FM synthesis.
- </para>
- <para>
- The current Linux kernel audio driver for this family of chips
- supports audio playback and recording, but hardware-assisted
- FM features, and hardware buffer direct-access (mmap)
- support are not yet available.
- </para>
- <para>
- This driver supports any Linux kernel version after 2.4.10.
- </para>
- <para>
- Please send bug reports to the mailing list <email>linux-via@gtf.org</email>.
- To subscribe, e-mail <email>majordomo@gtf.org</email> with
- </para>
- <programlisting>
- subscribe linux-via
- </programlisting>
- <para>
- in the body of the message.
- </para>
- </chapter>
-
- <chapter id="install">
- <title>Driver Installation</title>
- <para>
- To use this audio driver, select the
- CONFIG_SOUND_VIA82CXXX option in the section Sound during kernel configuration.
- Follow the usual kernel procedures for rebuilding the kernel,
- or building and installing driver modules.
- </para>
- <para>
- To make this driver the default audio driver, you can add the
- following to your /etc/conf.modules file:
- </para>
- <programlisting>
- alias sound via82cxxx_audio
- </programlisting>
- <para>
- Note that soundcore and ac97_codec support modules
- are also required for working audio, in addition to
- the via82cxxx_audio module itself.
- </para>
- </chapter>
-
- <chapter id="reportbug">
- <title>Submitting a bug report</title>
- <sect1 id="bugrepdesc"><title>Description of problem</title>
- <para>
- Describe the application you were using to play/record sound, and how
- to reproduce the problem.
- </para>
- </sect1>
- <sect1 id="bugrepdiag"><title>Diagnostic output</title>
- <para>
- Obtain the via-audio-diag diagnostics program from
- http://sf.net/projects/gkernel/ and provide a dump of the
- audio chip's registers while the problem is occurring. Sample command line:
- </para>
- <programlisting>
- ./via-audio-diag -aps > diag-output.txt
- </programlisting>
- </sect1>
- <sect1 id="bugrepdebug"><title>Driver debug output</title>
- <para>
- Define <constant>VIA_DEBUG</constant> at the beginning of the driver, then capture and email
- the kernel log output. This can be viewed in the system kernel log (if
- enabled), or via the dmesg program. Sample command line:
- </para>
- <programlisting>
- dmesg > /tmp/dmesg-output.txt
- </programlisting>
- </sect1>
- <sect1 id="bugrepprintk"><title>Bigger kernel message buffer</title>
- <para>
- If you wish to increase the size of the buffer displayed by dmesg, then
- change the <constant>LOG_BUF_LEN</constant> macro at the top of linux/kernel/printk.c, recompile
- your kernel, and pass the <constant>LOG_BUF_LEN</constant> value to dmesg. Sample command line with
- <constant>LOG_BUF_LEN</constant> == 32768:
- </para>
- <programlisting>
- dmesg -s 32768 > /tmp/dmesg-output.txt
- </programlisting>
- </sect1>
- </chapter>
-
- <chapter id="bugs">
- <title>Known Bugs And Assumptions</title>
- <para>
- <variablelist>
- <varlistentry><term>Low volume</term>
- <listitem>
- <para>
- Volume too low on many systems. Workaround: use mixer program
- such as xmixer to increase volume.
- </para>
- </listitem></varlistentry>
-
- </variablelist>
-
- </para>
- </chapter>
-
- <chapter id="thanks">
- <title>Thanks</title>
- <para>
- Via for providing e-mail support, specs, and NDA'd source code.
- </para>
- <para>
- MandrakeSoft for providing hacking time.
- </para>
- <para>
- AC97 mixer interface fixes and debugging by Ron Cemer <email>roncemer@gte.net</email>.
- </para>
- <para>
- Rui Sousa <email>rui.sousa@conexant.com</email>, for bugfixing
- MMAP support, and several other notable fixes that resulted from
- his hard work and testing.
- </para>
- <para>
- Adrian Cox <email>adrian@humboldt.co.uk</email>, for bugfixing
- MMAP support, and several other notable fixes that resulted from
- his hard work and testing.
- </para>
- <para>
- Thomas Sailer for further bugfixes.
- </para>
- </chapter>
-
- <chapter id="notes">
- <title>Random Notes</title>
- <para>
- Two /proc pseudo-files provide diagnostic information. This is generally
- not useful to most users. Power users can disable CONFIG_SOUND_VIA82CXXX_PROCFS,
- and remove the /proc support code. Once
- version 2.0.0 is released, the /proc support code will be disabled by
- default. Available /proc pseudo-files:
- </para>
- <programlisting>
- /proc/driver/via/0/info
- /proc/driver/via/0/ac97
- </programlisting>
- <para>
- This driver by default supports all PCI audio devices which report
- a vendor id of 0x1106, and a device id of 0x3058. Subsystem vendor
- and device ids are not examined.
- </para>
- <para>
- GNU indent formatting options:
- <programlisting>
--kr -i8 -ts8 -br -ce -bap -sob -l80 -pcs -cs -ss -bs -di1 -nbc -lp -psl
- </programlisting>
- </para>
- <para>
- Via has graciously donated e-mail support and source code to help further
- the development of this driver. Their assistance has been invaluable
- in the design and coding of the next major version of this driver.
- </para>
- <para>
- The Via audio chip apparently provides a second PCM scatter-gather
- DMA channel just for FM data, but does not have a full hardware MIDI
- processor. I haven't put much thought towards a solution here, but it
- might involve using SoftOSS midi wave table, or simply disabling MIDI
- support altogether and using the FM PCM channel as a second (input? output?)
- </para>
- </chapter>
-
- <chapter id="changelog">
- <title>Driver ChangeLog</title>
-
-<sect1 id="version191"><title>
-Version 1.9.1
-</title>
- <itemizedlist spacing="compact">
- <listitem>
- <para>
- DSP read/write bugfixes from Thomas Sailer.
- </para>
- </listitem>
-
- <listitem>
- <para>
- Add new PCI id for single-channel use of Via 8233.
- </para>
- </listitem>
-
- <listitem>
- <para>
- Other bug fixes, tweaks, new ioctls.
- </para>
- </listitem>
-
- </itemizedlist>
-</sect1>
-
-<sect1 id="version1115"><title>
-Version 1.1.15
-</title>
- <itemizedlist spacing="compact">
- <listitem>
- <para>
- Support for variable fragment size and variable fragment number (Rui
- Sousa)
- </para>
- </listitem>
-
- <listitem>
- <para>
- Fixes for the SPEED, STEREO, CHANNELS, FMT ioctls when in read &
- write mode (Rui Sousa)
- </para>
- </listitem>
-
- <listitem>
- <para>
- Mmaped sound is now fully functional. (Rui Sousa)
- </para>
- </listitem>
-
- <listitem>
- <para>
- Make sure to enable PCI device before reading any of its PCI
- config information. (fixes potential hotplug problems)
- </para>
- </listitem>
-
- <listitem>
- <para>
- Clean up code a bit and add more internal function documentation.
- </para>
- </listitem>
-
- <listitem>
- <para>
- AC97 codec access fixes (Adrian Cox)
- </para>
- </listitem>
-
- <listitem>
- <para>
- Big endian fixes (Adrian Cox)
- </para>
- </listitem>
-
- <listitem>
- <para>
- MIDI support (Adrian Cox)
- </para>
- </listitem>
-
- <listitem>
- <para>
- Detect and report locked-rate AC97 codecs. If your hardware only
- supports 48Khz (locked rate), then your recording/playback software
- must upsample or downsample accordingly. The hardware cannot do it.
- </para>
- </listitem>
-
- <listitem>
- <para>
- Use new pci_request_regions and pci_disable_device functions in
- kernel 2.4.6.
- </para>
- </listitem>
-
- </itemizedlist>
-</sect1>
-
-<sect1 id="version1114"><title>
-Version 1.1.14
-</title>
- <itemizedlist spacing="compact">
- <listitem>
- <para>
- Use VM_RESERVE when available, to eliminate unnecessary page faults.
- </para>
- </listitem>
- </itemizedlist>
-</sect1>
-
-<sect1 id="version1112"><title>
-Version 1.1.12
-</title>
- <itemizedlist spacing="compact">
- <listitem>
- <para>
- mmap bug fixes from Linus.
- </para>
- </listitem>
- </itemizedlist>
-</sect1>
-
-<sect1 id="version1111"><title>
-Version 1.1.11
-</title>
- <itemizedlist spacing="compact">
- <listitem>
- <para>
- Many more bug fixes. mmap enabled by default, but may still be buggy.
- </para>
- </listitem>
-
- <listitem>
- <para>
- Uses new and spiffy method of mmap'ing the DMA buffer, based
- on a suggestion from Linus.
- </para>
- </listitem>
- </itemizedlist>
-</sect1>
-
-<sect1 id="version1110"><title>
-Version 1.1.10
-</title>
- <itemizedlist spacing="compact">
- <listitem>
- <para>
- Many bug fixes. mmap enabled by default, but may still be buggy.
- </para>
- </listitem>
- </itemizedlist>
-</sect1>
-
-<sect1 id="version119"><title>
-Version 1.1.9
-</title>
- <itemizedlist spacing="compact">
- <listitem>
- <para>
- Redesign and rewrite audio playback implementation. (faster and smaller, hopefully)
- </para>
- </listitem>
-
- <listitem>
- <para>
- Implement recording and full duplex (DSP_CAP_DUPLEX) support.
- </para>
- </listitem>
-
- <listitem>
- <para>
- Make procfs support optional.
- </para>
- </listitem>
-
- <listitem>
- <para>
- Quick interrupt status check, to lessen overhead in interrupt
- sharing situations.
- </para>
- </listitem>
-
- <listitem>
- <para>
- Add mmap(2) support. Disabled for now, it is still buggy and experimental.
- </para>
- </listitem>
-
- <listitem>
- <para>
- Surround all syscalls with a semaphore for cheap and easy SMP protection.
- </para>
- </listitem>
-
- <listitem>
- <para>
- Fix bug in channel shutdown (hardware channel reset) code.
- </para>
- </listitem>
-
- <listitem>
- <para>
- Remove unnecessary spinlocks (better performance).
- </para>
- </listitem>
-
- <listitem>
- <para>
- Eliminate "unknown AFMT" message by using a different method
- of selecting the best AFMT_xxx sound sample format for use.
- </para>
- </listitem>
-
- <listitem>
- <para>
- Support for realtime hardware pointer position reporting
- (DSP_CAP_REALTIME, SNDCTL_DSP_GETxPTR ioctls)
- </para>
- </listitem>
-
- <listitem>
- <para>
- Support for capture/playback triggering
- (DSP_CAP_TRIGGER, SNDCTL_DSP_SETTRIGGER ioctls)
- </para>
- </listitem>
-
- <listitem>
- <para>
- SNDCTL_DSP_SETDUPLEX and SNDCTL_DSP_POST ioctls now handled.
- </para>
- </listitem>
-
- <listitem>
- <para>
- Rewrite open(2) and close(2) logic to allow only one user at
- a time. All other open(2) attempts will sleep until they succeed.
- FIXME: open(O_RDONLY) and open(O_WRONLY) should be allowed to succeed.
- </para>
- </listitem>
-
- <listitem>
- <para>
- Reviewed code to ensure that SMP and multiple audio devices
- are fully supported.
- </para>
- </listitem>
-
- </itemizedlist>
-</sect1>
-
-<sect1 id="version118"><title>
-Version 1.1.8
-</title>
- <itemizedlist spacing="compact">
- <listitem>
- <para>
- Clean up interrupt handler output. Fixes the following kernel error message:
- </para>
- <programlisting>
- unhandled interrupt ...
- </programlisting>
- </listitem>
-
- <listitem>
- <para>
- Convert documentation to DocBook, so that PDF, HTML and PostScript (.ps) output is readily
- available.
- </para>
- </listitem>
-
- </itemizedlist>
-</sect1>
-
-<sect1 id="version117"><title>
-Version 1.1.7
-</title>
- <itemizedlist spacing="compact">
- <listitem>
- <para>
- Fix module unload bug where mixer device left registered
- after driver exit
- </para>
- </listitem>
- </itemizedlist>
-</sect1>
-
-<sect1 id="version116"><title>
-Version 1.1.6
-</title>
- <itemizedlist spacing="compact">
- <listitem>
- <para>
- Rewrite via_set_rate to mimic ALSA basic AC97 rate setting
- </para>
- </listitem>
- <listitem>
- <para>
- Remove much dead code
- </para>
- </listitem>
- <listitem>
- <para>
- Complete spin_lock_irqsave -> spin_lock_irq conversion in via_dsp_ioctl
- </para>
- </listitem>
- <listitem>
- <para>
- Fix build problem in via_dsp_ioctl
- </para>
- </listitem>
- <listitem>
- <para>
- Optimize included headers to eliminate headers found in linux/sound
- </para>
- </listitem>
- </itemizedlist>
-</sect1>
-
-<sect1 id="version115"><title>
-Version 1.1.5
-</title>
- <itemizedlist spacing="compact">
- <listitem>
- <para>
- Disable some overly-verbose debugging code
- </para>
- </listitem>
- <listitem>
- <para>
- Remove unnecessary sound locks
- </para>
- </listitem>
- <listitem>
- <para>
- Fix some ioctls for better time resolution
- </para>
- </listitem>
- <listitem>
- <para>
- Begin spin_lock_irqsave -> spin_lock_irq conversion in via_dsp_ioctl
- </para>
- </listitem>
- </itemizedlist>
-</sect1>
-
-<sect1 id="version114"><title>
-Version 1.1.4
-</title>
- <itemizedlist spacing="compact">
- <listitem>
- <para>
- Completed rewrite of driver. Eliminated SoundBlaster compatibility
- completely, and now uses the much-faster scatter-gather DMA engine.
- </para>
- </listitem>
- </itemizedlist>
-</sect1>
-
- </chapter>
-
- <chapter id="intfunctions">
- <title>Internal Functions</title>
-!Isound/oss/via82cxxx_audio.c
- </chapter>
-
-</book>
-
-
projects / linux-2.6-omap-h63xx.git / commitdiff