select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This driver supports graphics boards with the nVidia chips, TNT
and newer. For very old chipsets, such as the RIVA128, then use
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This driver supports graphics boards with the nVidia Riva/Geforce
chips.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This driver supports the on-board graphics built in to the Intel 810
and 815 chipsets. Say Y if you have and plan to use such a board.
If unsure, say N.
+config FB_I810_I2C
+ bool "Enable DDC Support"
+ depends on FB_I810 && I2C && FB_I810_GTF
+ select I2C_ALGOBIT
+ help
+
config FB_INTEL
tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This driver supports the on-board graphics built in to the Intel
830M/845G/852GM/855GM/865G chipsets.
can be build either as modules or built-in.
There is a product page at
- <http://www.ati.com/na/pages/products/pc/radeon32/index.html>.
-
+ http://apps.ati.com/ATIcompare/
config FB_RADEON_I2C
bool "DDC/I2C for ATI Radeon support"
depends on FB_RADEON
choose N here.
config FB_SIS
- tristate "SiS acceleration"
+ tristate "SiS/XGI display support"
depends on FB && PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_SOFT_CURSOR
help
- This is the frame buffer device driver for the SiS 300, 315 and
- 330 series VGA chipsets. Specs available at <http://www.sis.com>
+ This is the frame buffer device driver for the SiS 300, 315, 330
+ and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
+ Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
To compile this driver as a module, choose M here; the module
will be called sisfb.
Say Y here to support use of the SiS 300/305, 540, 630 and 730.
config FB_SIS_315
- bool "SiS 315/330 series support"
+ bool "SiS 315/330/340 series and XGI support"
depends on FB_SIS
help
- Say Y here to support use of the SiS 315 and 330 series
- (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760).
+ Say Y here to support use of the SiS 315, 330 and 340 series
+ (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
+ as XGI V3XT, V5, V8 and Z7.
config FB_NEOMAGIC
tristate "NeoMagic display support"
Please read the <file:Documentation/fb/README-sstfb.txt> for supported
options and other important info support.
+config FB_CYBLA
+ tristate "Cyberblade/i1 support"
+ depends on FB && PCI
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ select VIDEO_SELECT
+ ---help---
+ This driver is supposed to support the Trident Cyberblade/i1
+ graphics core integrated in the VIA VT8601A North Bridge,
+ also known as VIA Apollo PLE133.
+
+ Status:
+ - Developed, tested and working on EPIA 5000 and EPIA 800.
+ - Does work reliable on all systems with CRT/LCD connected to
+ normal VGA ports.
+ - Should work on systems that do use the internal LCD port, but
+ this is absolutely not tested.
+
+ Character imageblit, copyarea and rectangle fill are hw accelerated,
+ ypan scrolling is used by default.
+
+ Please do read <file:Documentation/fb/cyblafb/*>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cyblafb.
+
config FB_TRIDENT
tristate "Trident support"
depends on FB && PCI
but also on some motherboards. For more information, read
<file:Documentation/fb/tridentfb.txt>
+ Cyberblade/i1 support will be removed soon, use the cyblafb driver
+ instead.
+
Say Y if you have such a graphics board.
+
To compile this driver as a module, choose M here: the
module will be called tridentfb.
This will compile the Trident frame buffer device with
acceleration functions.
-
config FB_PM3
tristate "Permedia3 support"
depends on FB && PCI && BROKEN
working with S1D13806). Product specs at
<http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
+config FB_S3C2410
+ tristate "S3C2410 LCD framebuffer support"
+ depends on FB && ARCH_S3C2410
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ ---help---
+ Frame buffer driver for the built-in LCD controller in the Samsung
+ S3C2410 processor.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called s3c2410fb. If you want to compile it as a module,
+ say M here and read <file:Documentation/modules.txt>.
+
+ If unsure, say N.
+config FB_S3C2410_DEBUG
+ bool "S3C2410 lcd debug messages"
+ depends on FB_S3C2410
+ help
+ Turn on debugging messages. Note that you can set/unset at run time
+ through sysfs
+
config FB_OMAP
tristate "OMAP frame buffer support (EXPERIMENTAL)"
depends on FB && ARCH_OMAP1
* Convert calls to our calling convention.
*/
#define flush_cache_all() __cpuc_flush_kern_all()
+#ifndef CONFIG_CPU_CACHE_VIPT
+static inline void flush_cache_mm(struct mm_struct *mm)
+{
+ if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+ __cpuc_flush_user_all();
+}
+
+static inline void
+flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
+{
+ if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask))
+ __cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
+ vma->vm_flags);
+}
+
+static inline void
+flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
+{
+ if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+ unsigned long addr = user_addr & PAGE_MASK;
+ __cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
+ }
+}
+#else
extern void flush_cache_mm(struct mm_struct *mm);
extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn);
+#endif
/*
* flush_cache_user_range is used when we want to ensure that the
#define FB_ACCEL_NV_20 44 /* nVidia Arch 20 */
#define FB_ACCEL_NV_30 45 /* nVidia Arch 30 */
#define FB_ACCEL_NV_40 46 /* nVidia Arch 40 */
-#define FB_ACCEL_OMAP1610 47 /* TI OMAP16xx */
+#define FB_ACCEL_XGI_VOLARI_V 47 /* XGI Volari V3XT, V5, V8 */
+#define FB_ACCEL_XGI_VOLARI_Z 48 /* XGI Volari Z7 */
+#define FB_ACCEL_OMAP1610 49 /* TI OMAP16xx */
#define FB_ACCEL_NEOMAGIC_NM2070 90 /* NeoMagic NM2070 */
#define FB_ACCEL_NEOMAGIC_NM2090 91 /* NeoMagic NM2090 */
#define FB_ACCEL_NEOMAGIC_NM2093 92 /* NeoMagic NM2093 */
#define FB_EVENT_BLANK 0x08
/* Private modelist is to be replaced */
#define FB_EVENT_NEW_MODELIST 0x09
+/* The resolution of the passed in fb_info about to change and
+ all vc's should be changed */
+#define FB_EVENT_MODE_CHANGE_ALL 0x0A
struct fb_event {
struct fb_info *info;
u32 height, u32 shift_high, u32 shift_low, u32 mod);
extern void fb_pad_aligned_buffer(u8 *dst, u32 d_pitch, u8 *src, u32 s_pitch, u32 height);
extern void fb_set_suspend(struct fb_info *info, int state);
-extern int fb_get_color_depth(struct fb_var_screeninfo *var);
+extern int fb_get_color_depth(struct fb_var_screeninfo *var,
+ struct fb_fix_screeninfo *fix);
extern int fb_get_options(char *name, char **option);
extern int fb_new_modelist(struct fb_info *info);
extern struct fb_info *registered_fb[FB_MAX];
extern int num_registered_fb;
+static inline void __fb_pad_aligned_buffer(u8 *dst, u32 d_pitch,
+ u8 *src, u32 s_pitch, u32 height)
+{
+ int i, j;
+
+ d_pitch -= s_pitch;
+
+ for (i = height; i--; ) {
+ /* s_pitch is a few bytes at the most, memcpy is suboptimal */
+ for (j = 0; j < s_pitch; j++)
+ *dst++ = *src++;
+ dst += d_pitch;
+ }
+}
+
/* drivers/video/fbsysfs.c */
extern struct fb_info *framebuffer_alloc(size_t size, struct device *dev);
extern void framebuffer_release(struct fb_info *info);
extern int fb_validate_mode(const struct fb_var_screeninfo *var,
struct fb_info *info);
extern int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var);
-extern void fb_edid_to_monspecs(unsigned char *edid, struct fb_monspecs *specs);
+extern const unsigned char *fb_firmware_edid(struct device *device);
+extern void fb_edid_to_monspecs(unsigned char *edid,
+ struct fb_monspecs *specs);
extern void fb_destroy_modedb(struct fb_videomode *modedb);
+extern int fb_find_mode_cvt(struct fb_videomode *mode, int margins, int rb);
/* drivers/video/modedb.c */
#define VESA_MODEDB_SIZE 34
# Makefile for ALSA
#
-snd-sa11xx-uda1341-objs := sa11xx-uda1341.o
-snd-aaci-objs := aaci.o devdma.o
-snd-pxa2xx-pcm-objs := pxa2xx-pcm.o
-snd-pxa2xx-ac97-objs := pxa2xx-ac97.o
-snd-omap-aic23-objs := omap-aic23.o omap-alsa-dma.o omap-alsa-mixer.o
-
obj-$(CONFIG_SND_SA11XX_UDA1341) += snd-sa11xx-uda1341.o
+snd-sa11xx-uda1341-objs := sa11xx-uda1341.o
+
obj-$(CONFIG_SND_ARMAACI) += snd-aaci.o
-obj-$(CONFIG_SND_PXA2XX_PCM) += snd-pxa2xx-pcm.o
-obj-$(CONFIG_SND_PXA2XX_AC97) += snd-pxa2xx-ac97.o
+snd-aaci-objs := aaci.o devdma.o
+
+obj-$(CONFIG_SND_PXA2XX_PCM) += snd-pxa2xx-pcm.o
+snd-pxa2xx-pcm-objs := pxa2xx-pcm.o
+
+obj-$(CONFIG_SND_PXA2XX_AC97) += snd-pxa2xx-ac97.o
+snd-pxa2xx-ac97-objs := pxa2xx-ac97.o
+
obj-$(CONFIG_SND_OMAP_AIC23) += snd-omap-aic23.o
+snd-omap-aic23-objs := omap-aic23.o omap-alsa-dma.o omap-alsa-mixer.o
projects / linux-2.6-omap-h63xx.git / commitdiff