]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
gxfb: create DC/VP/FP-specific handlers rather than using readl/writel
authorAndres Salomon <dilinger@queued.net>
Mon, 28 Apr 2008 09:14:58 +0000 (02:14 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Mon, 28 Apr 2008 15:58:36 +0000 (08:58 -0700)
This creates read_dc/write_dc, read_vp/write_vp, and read_fp/write_fp for
reading and updating those registers.  It creates gxfb.h to house these.

We also drop a no-op readl() from gx_set_mode.  Other than that, there should
be no functionality change.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/video/geode/display_gx.c
drivers/video/geode/gxfb.h [new file with mode: 0644]
drivers/video/geode/gxfb_core.c
drivers/video/geode/video_gx.c

index 8cd75725a31b6ce896a319ebc7b2f8990628d895..47f422e199749f44d1182417257bd5da42dd9b0b 100644 (file)
@@ -20,6 +20,7 @@
 
 #include "geodefb.h"
 #include "display_gx.h"
+#include "gxfb.h"
 
 unsigned int gx_frame_buffer_size(void)
 {
@@ -50,22 +51,21 @@ static void gx_set_mode(struct fb_info *info)
        int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
 
        /* Unlock the display controller registers. */
-       readl(par->dc_regs + DC_UNLOCK);
-       writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
+       write_dc(par, DC_UNLOCK, DC_UNLOCK_CODE);
 
-       gcfg = readl(par->dc_regs + DC_GENERAL_CFG);
-       dcfg = readl(par->dc_regs + DC_DISPLAY_CFG);
+       gcfg = read_dc(par, DC_GENERAL_CFG);
+       dcfg = read_dc(par, DC_DISPLAY_CFG);
 
        /* Disable the timing generator. */
        dcfg &= ~(DC_DCFG_TGEN);
-       writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
+       write_dc(par, DC_DISPLAY_CFG, dcfg);
 
        /* Wait for pending memory requests before disabling the FIFO load. */
        udelay(100);
 
        /* Disable FIFO load and compression. */
        gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
-       writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
+       write_dc(par, DC_GENERAL_CFG, gcfg);
 
        /* Setup DCLK and its divisor. */
        par->vid_ops->set_dclk(info);
@@ -83,12 +83,12 @@ static void gx_set_mode(struct fb_info *info)
        gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE;
 
        /* Framebuffer start offset. */
-       writel(0, par->dc_regs + DC_FB_ST_OFFSET);
+       write_dc(par, DC_FB_ST_OFFSET, 0);
 
        /* Line delta and line buffer length. */
-       writel(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH);
-       writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
-              par->dc_regs + DC_LINE_SIZE);
+       write_dc(par, DC_GFX_PITCH, info->fix.line_length >> 3);
+       write_dc(par, DC_LINE_SIZE,
+               ((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2);
 
 
        /* Enable graphics and video data and unmask address lines. */
@@ -127,22 +127,28 @@ static void gx_set_mode(struct fb_info *info)
        vblankend = vsyncend + info->var.upper_margin;
        vtotal = vblankend;
 
-       writel((hactive - 1)     | ((htotal - 1) << 16),    par->dc_regs + DC_H_ACTIVE_TIMING);
-       writel((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING);
-       writel((hsyncstart - 1)  | ((hsyncend - 1) << 16),  par->dc_regs + DC_H_SYNC_TIMING);
+       write_dc(par, DC_H_ACTIVE_TIMING, (hactive - 1)    |
+                       ((htotal - 1) << 16));
+       write_dc(par, DC_H_BLANK_TIMING, (hblankstart - 1) |
+                       ((hblankend - 1) << 16));
+       write_dc(par, DC_H_SYNC_TIMING, (hsyncstart - 1)   |
+                       ((hsyncend - 1) << 16));
 
-       writel((vactive - 1)     | ((vtotal - 1) << 16),    par->dc_regs + DC_V_ACTIVE_TIMING);
-       writel((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING);
-       writel((vsyncstart - 1)  | ((vsyncend - 1) << 16),  par->dc_regs + DC_V_SYNC_TIMING);
+       write_dc(par, DC_V_ACTIVE_TIMING, (vactive - 1)    |
+                       ((vtotal - 1) << 16));
+       write_dc(par, DC_V_BLANK_TIMING, (vblankstart - 1) |
+                       ((vblankend - 1) << 16));
+       write_dc(par, DC_V_SYNC_TIMING, (vsyncstart - 1)   |
+                       ((vsyncend - 1) << 16));
 
        /* Write final register values. */
-       writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
-       writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
+       write_dc(par, DC_DISPLAY_CFG, dcfg);
+       write_dc(par, DC_GENERAL_CFG, gcfg);
 
        par->vid_ops->configure_display(info);
 
        /* Relock display controller registers */
-       writel(0, par->dc_regs + DC_UNLOCK);
+       write_dc(par, DC_UNLOCK, 0);
 }
 
 static void gx_set_hw_palette_reg(struct fb_info *info, unsigned regno,
@@ -156,8 +162,8 @@ static void gx_set_hw_palette_reg(struct fb_info *info, unsigned regno,
        val |= (green)      & 0x00ff00;
        val |= (blue  >> 8) & 0x0000ff;
 
-       writel(regno, par->dc_regs + DC_PAL_ADDRESS);
-       writel(val, par->dc_regs + DC_PAL_DATA);
+       write_dc(par, DC_PAL_ADDRESS, regno);
+       write_dc(par, DC_PAL_DATA, val);
 }
 
 struct geode_dc_ops gx_dc_ops = {
diff --git a/drivers/video/geode/gxfb.h b/drivers/video/geode/gxfb.h
new file mode 100644 (file)
index 0000000..42fa10d
--- /dev/null
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2008 Andres Salomon <dilinger@debian.org>
+ *
+ * Geode GX2 register tables
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef _GXFB_H_
+#define _GXFB_H_
+
+#include <linux/io.h>
+
+static inline uint32_t read_dc(struct geodefb_par *par, int reg)
+{
+       return readl(par->dc_regs + reg);
+}
+
+static inline void write_dc(struct geodefb_par *par, int reg, uint32_t val)
+{
+       writel(val, par->dc_regs + reg);
+
+}
+
+static inline uint32_t read_vp(struct geodefb_par *par, int reg)
+{
+       return readl(par->vid_regs + reg);
+}
+
+static inline void write_vp(struct geodefb_par *par, int reg, uint32_t val)
+{
+       writel(val, par->vid_regs + reg);
+}
+
+static inline uint32_t read_fp(struct geodefb_par *par, int reg)
+{
+       return readl(par->vid_regs + reg);
+}
+
+static inline void write_fp(struct geodefb_par *par, int reg, uint32_t val)
+{
+       writel(val, par->vid_regs + reg);
+}
+
+#endif
index 8021bcb9ab6ac13ab9153c5231373dd23a2732a4..fd58dcc44670062223b6df64ae99b3df1c0582a6 100644 (file)
@@ -35,6 +35,7 @@
 #include "geodefb.h"
 #include "display_gx.h"
 #include "video_gx.h"
+#include "gxfb.h"
 
 static char *mode_option;
 static int vram;
@@ -243,8 +244,7 @@ static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *de
        /* Set the 16MiB aligned base address of the graphics memory region
         * in the display controller */
 
-       writel(info->fix.smem_start & 0xFF000000,
-                       par->dc_regs + DC_GLIU0_MEM_OFFSET);
+       write_dc(par, DC_GLIU0_MEM_OFFSET, info->fix.smem_start & 0xFF000000);
 
        dev_info(&dev->dev, "%d KiB of video memory at 0x%lx\n",
                 info->fix.smem_len / 1024, info->fix.smem_start);
index cfe2c80b025dcbf4eff0a86ccc067b867ef2b48e..e45d94143da058b61ff866cecd865becb210443d 100644 (file)
@@ -20,6 +20,7 @@
 
 #include "geodefb.h"
 #include "video_gx.h"
+#include "gxfb.h"
 
 
 /*
@@ -192,16 +193,16 @@ gx_configure_tft(struct fb_info *info)
 
        /* Turn off the panel */
 
-       fp = readl(par->vid_regs + GX_FP_PM);
+       fp = read_fp(par, GX_FP_PM);
        fp &= ~GX_FP_PM_P;
-       writel(fp, par->vid_regs + GX_FP_PM);
+       write_fp(par, GX_FP_PM, fp);
 
        /* Set timing 1 */
 
-       fp = readl(par->vid_regs + GX_FP_PT1);
+       fp = read_fp(par, GX_FP_PT1);
        fp &= GX_FP_PT1_VSIZE_MASK;
        fp |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
-       writel(fp, par->vid_regs + GX_FP_PT1);
+       write_fp(par, GX_FP_PT1, fp);
 
        /* Timing 2 */
        /* Set bits that are always on for TFT */
@@ -216,22 +217,22 @@ gx_configure_tft(struct fb_info *info)
        if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
                fp |= GX_FP_PT2_HSP;
 
-       writel(fp, par->vid_regs + GX_FP_PT2);
+       write_fp(par, GX_FP_PT2, fp);
 
        /*  Set the dither control */
-       writel(0x70, par->vid_regs + GX_FP_DFC);
+       write_fp(par, GX_FP_DFC, 0x70);
 
        /* Enable the FP data and power (in case the BIOS didn't) */
 
-       fp = readl(par->vid_regs + GX_DCFG);
+       fp = read_vp(par, GX_DCFG);
        fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN;
-       writel(fp, par->vid_regs + GX_DCFG);
+       write_vp(par, GX_DCFG, fp);
 
        /* Unblank the panel */
 
-       fp = readl(par->vid_regs + GX_FP_PM);
+       fp = read_fp(par, GX_FP_PM);
        fp |= GX_FP_PM_P;
-       writel(fp, par->vid_regs + GX_FP_PM);
+       write_fp(par, GX_FP_PM, fp);
 }
 
 static void gx_configure_display(struct fb_info *info)
@@ -240,11 +241,11 @@ static void gx_configure_display(struct fb_info *info)
        u32 dcfg, misc;
 
        /* Write the display configuration */
-       dcfg = readl(par->vid_regs + GX_DCFG);
+       dcfg = read_vp(par, GX_DCFG);
 
        /* Disable hsync and vsync */
        dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
-       writel(dcfg, par->vid_regs + GX_DCFG);
+       write_vp(par, GX_DCFG, dcfg);
 
        /* Clear bits from existing mode. */
        dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
@@ -257,7 +258,7 @@ static void gx_configure_display(struct fb_info *info)
        /* Enable hsync and vsync. */
        dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN;
 
-       misc = readl(par->vid_regs + GX_MISC);
+       misc = read_vp(par, GX_MISC);
 
        /* Disable gamma correction */
        misc |= GX_MISC_GAM_EN;
@@ -266,7 +267,7 @@ static void gx_configure_display(struct fb_info *info)
 
                /* Power up the CRT DACs */
                misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
-               writel(misc, par->vid_regs + GX_MISC);
+               write_vp(par, GX_MISC, misc);
 
                /* Only change the sync polarities if we are running
                 * in CRT mode.  The FP polarities will be handled in
@@ -278,7 +279,7 @@ static void gx_configure_display(struct fb_info *info)
        } else {
                /* Power down the CRT DACs if in FP mode */
                misc |= (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
-               writel(misc, par->vid_regs + GX_MISC);
+               write_vp(par, GX_MISC, misc);
        }
 
        /* Enable the display logic */
@@ -288,7 +289,7 @@ static void gx_configure_display(struct fb_info *info)
 
        /* Enable the external DAC VREF? */
 
-       writel(dcfg, par->vid_regs + GX_DCFG);
+       write_vp(par, GX_DCFG, dcfg);
 
        /* Set up the flat panel (if it is enabled) */
 
@@ -322,7 +323,7 @@ static int gx_blank_display(struct fb_info *info, int blank_mode)
        default:
                return -EINVAL;
        }
-       dcfg = readl(par->vid_regs + GX_DCFG);
+       dcfg = read_vp(par, GX_DCFG);
        dcfg &= ~(GX_DCFG_DAC_BL_EN
                  | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN);
        if (!blank)
@@ -331,17 +332,17 @@ static int gx_blank_display(struct fb_info *info, int blank_mode)
                dcfg |= GX_DCFG_HSYNC_EN;
        if (vsync)
                dcfg |= GX_DCFG_VSYNC_EN;
-       writel(dcfg, par->vid_regs + GX_DCFG);
+       write_vp(par, GX_DCFG, dcfg);
 
        /* Power on/off flat panel. */
 
        if (par->enable_crt == 0) {
-               fp_pm = readl(par->vid_regs + GX_FP_PM);
+               fp_pm = read_fp(par, GX_FP_PM);
                if (blank_mode == FB_BLANK_POWERDOWN)
                        fp_pm &= ~GX_FP_PM_P;
                else
                        fp_pm |= GX_FP_PM_P;
-               writel(fp_pm, par->vid_regs + GX_FP_PM);
+               write_fp(par, GX_FP_PM, fp_pm);
        }
 
        return 0;