If unsure, say N
+config SSB_DRIVER_GIGE
+ bool "SSB Broadcom Gigabit Ethernet driver"
+ depends on SSB_PCIHOST_POSSIBLE && SSB_EMBEDDED && MIPS
+ help
+ Driver for the Sonics Silicon Backplane attached
+ Broadcom Gigabit Ethernet.
+
+ If unsure, say N
+
endmenu
ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
+ssb-$(CONFIG_SSB_DRIVER_GIGE) += driver_gige.o
# b43 pci-ssb-bridge driver
# Not strictly a part of SSB, but kept here for convenience
--- /dev/null
+/*
+ * Sonics Silicon Backplane
+ * Broadcom Gigabit Ethernet core driver
+ *
+ * Copyright 2008, Broadcom Corporation
+ * Copyright 2008, Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_driver_gige.h>
+#include <linux/pci.h>
+#include <linux/pci_regs.h>
+
+
+/*
+MODULE_DESCRIPTION("SSB Broadcom Gigabit Ethernet driver");
+MODULE_AUTHOR("Michael Buesch");
+MODULE_LICENSE("GPL");
+*/
+
+static const struct ssb_device_id ssb_gige_tbl[] = {
+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_ETHERNET_GBIT, SSB_ANY_REV),
+ SSB_DEVTABLE_END
+};
+/* MODULE_DEVICE_TABLE(ssb, ssb_gige_tbl); */
+
+
+static inline u8 gige_read8(struct ssb_gige *dev, u16 offset)
+{
+ return ssb_read8(dev->dev, offset);
+}
+
+static inline u16 gige_read16(struct ssb_gige *dev, u16 offset)
+{
+ return ssb_read16(dev->dev, offset);
+}
+
+static inline u32 gige_read32(struct ssb_gige *dev, u16 offset)
+{
+ return ssb_read32(dev->dev, offset);
+}
+
+static inline void gige_write8(struct ssb_gige *dev,
+ u16 offset, u8 value)
+{
+ ssb_write8(dev->dev, offset, value);
+}
+
+static inline void gige_write16(struct ssb_gige *dev,
+ u16 offset, u16 value)
+{
+ ssb_write16(dev->dev, offset, value);
+}
+
+static inline void gige_write32(struct ssb_gige *dev,
+ u16 offset, u32 value)
+{
+ ssb_write32(dev->dev, offset, value);
+}
+
+static inline
+u8 gige_pcicfg_read8(struct ssb_gige *dev, unsigned int offset)
+{
+ BUG_ON(offset >= 256);
+ return gige_read8(dev, SSB_GIGE_PCICFG + offset);
+}
+
+static inline
+u16 gige_pcicfg_read16(struct ssb_gige *dev, unsigned int offset)
+{
+ BUG_ON(offset >= 256);
+ return gige_read16(dev, SSB_GIGE_PCICFG + offset);
+}
+
+static inline
+u32 gige_pcicfg_read32(struct ssb_gige *dev, unsigned int offset)
+{
+ BUG_ON(offset >= 256);
+ return gige_read32(dev, SSB_GIGE_PCICFG + offset);
+}
+
+static inline
+void gige_pcicfg_write8(struct ssb_gige *dev,
+ unsigned int offset, u8 value)
+{
+ BUG_ON(offset >= 256);
+ gige_write8(dev, SSB_GIGE_PCICFG + offset, value);
+}
+
+static inline
+void gige_pcicfg_write16(struct ssb_gige *dev,
+ unsigned int offset, u16 value)
+{
+ BUG_ON(offset >= 256);
+ gige_write16(dev, SSB_GIGE_PCICFG + offset, value);
+}
+
+static inline
+void gige_pcicfg_write32(struct ssb_gige *dev,
+ unsigned int offset, u32 value)
+{
+ BUG_ON(offset >= 256);
+ gige_write32(dev, SSB_GIGE_PCICFG + offset, value);
+}
+
+static int ssb_gige_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+ int reg, int size, u32 *val)
+{
+ struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
+ unsigned long flags;
+
+ if ((PCI_SLOT(devfn) > 0) || (PCI_FUNC(devfn) > 0))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (reg >= 256)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ spin_lock_irqsave(&dev->lock, flags);
+ switch (size) {
+ case 1:
+ *val = gige_pcicfg_read8(dev, reg);
+ break;
+ case 2:
+ *val = gige_pcicfg_read16(dev, reg);
+ break;
+ case 4:
+ *val = gige_pcicfg_read32(dev, reg);
+ break;
+ default:
+ WARN_ON(1);
+ }
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int ssb_gige_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+ int reg, int size, u32 val)
+{
+ struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
+ unsigned long flags;
+
+ if ((PCI_SLOT(devfn) > 0) || (PCI_FUNC(devfn) > 0))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (reg >= 256)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ spin_lock_irqsave(&dev->lock, flags);
+ switch (size) {
+ case 1:
+ gige_pcicfg_write8(dev, reg, val);
+ break;
+ case 2:
+ gige_pcicfg_write16(dev, reg, val);
+ break;
+ case 4:
+ gige_pcicfg_write32(dev, reg, val);
+ break;
+ default:
+ WARN_ON(1);
+ }
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int ssb_gige_probe(struct ssb_device *sdev, const struct ssb_device_id *id)
+{
+ struct ssb_gige *dev;
+ u32 base, tmslow, tmshigh;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+ dev->dev = sdev;
+
+ spin_lock_init(&dev->lock);
+ dev->pci_controller.pci_ops = &dev->pci_ops;
+ dev->pci_controller.io_resource = &dev->io_resource;
+ dev->pci_controller.mem_resource = &dev->mem_resource;
+ dev->pci_controller.io_map_base = 0x800;
+ dev->pci_ops.read = ssb_gige_pci_read_config;
+ dev->pci_ops.write = ssb_gige_pci_write_config;
+
+ dev->io_resource.name = SSB_GIGE_IO_RES_NAME;
+ dev->io_resource.start = 0x800;
+ dev->io_resource.end = 0x8FF;
+ dev->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED;
+
+ if (!ssb_device_is_enabled(sdev))
+ ssb_device_enable(sdev, 0);
+
+ /* Setup BAR0. This is a 64k MMIO region. */
+ base = ssb_admatch_base(ssb_read32(sdev, SSB_ADMATCH1));
+ gige_pcicfg_write32(dev, PCI_BASE_ADDRESS_0, base);
+ gige_pcicfg_write32(dev, PCI_BASE_ADDRESS_1, 0);
+
+ dev->mem_resource.name = SSB_GIGE_MEM_RES_NAME;
+ dev->mem_resource.start = base;
+ dev->mem_resource.end = base + 0x10000 - 1;
+ dev->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED;
+
+ /* Enable the memory region. */
+ gige_pcicfg_write16(dev, PCI_COMMAND,
+ gige_pcicfg_read16(dev, PCI_COMMAND)
+ | PCI_COMMAND_MEMORY);
+
+ /* Write flushing is controlled by the Flush Status Control register.
+ * We want to flush every register write with a timeout and we want
+ * to disable the IRQ mask while flushing to avoid concurrency.
+ * Note that automatic write flushing does _not_ work from
+ * an IRQ handler. The driver must flush manually by reading a register.
+ */
+ gige_write32(dev, SSB_GIGE_SHIM_FLUSHSTAT, 0x00000068);
+
+ /* Check if we have an RGMII or GMII PHY-bus.
+ * On RGMII do not bypass the DLLs */
+ tmslow = ssb_read32(sdev, SSB_TMSLOW);
+ tmshigh = ssb_read32(sdev, SSB_TMSHIGH);
+ if (tmshigh & SSB_GIGE_TMSHIGH_RGMII) {
+ tmslow &= ~SSB_GIGE_TMSLOW_TXBYPASS;
+ tmslow &= ~SSB_GIGE_TMSLOW_RXBYPASS;
+ dev->has_rgmii = 1;
+ } else {
+ tmslow |= SSB_GIGE_TMSLOW_TXBYPASS;
+ tmslow |= SSB_GIGE_TMSLOW_RXBYPASS;
+ dev->has_rgmii = 0;
+ }
+ tmslow |= SSB_GIGE_TMSLOW_DLLEN;
+ ssb_write32(sdev, SSB_TMSLOW, tmslow);
+
+ ssb_set_drvdata(sdev, dev);
+ register_pci_controller(&dev->pci_controller);
+
+ return 0;
+}
+
+bool pdev_is_ssb_gige_core(struct pci_dev *pdev)
+{
+ if (!pdev->resource[0].name)
+ return 0;
+ return (strcmp(pdev->resource[0].name, SSB_GIGE_MEM_RES_NAME) == 0);
+}
+EXPORT_SYMBOL(pdev_is_ssb_gige_core);
+
+int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
+ struct pci_dev *pdev)
+{
+ struct ssb_gige *dev = ssb_get_drvdata(sdev);
+ struct resource *res;
+
+ if (pdev->bus->ops != &dev->pci_ops) {
+ /* The PCI device is not on this SSB GigE bridge device. */
+ return -ENODEV;
+ }
+
+ /* Fixup the PCI resources. */
+ res = &(pdev->resource[0]);
+ res->flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED;
+ res->name = dev->mem_resource.name;
+ res->start = dev->mem_resource.start;
+ res->end = dev->mem_resource.end;
+
+ /* Fixup interrupt lines. */
+ pdev->irq = ssb_mips_irq(sdev) + 2;
+ pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, pdev->irq);
+
+ return 0;
+}
+
+int ssb_gige_map_irq(struct ssb_device *sdev,
+ const struct pci_dev *pdev)
+{
+ struct ssb_gige *dev = ssb_get_drvdata(sdev);
+
+ if (pdev->bus->ops != &dev->pci_ops) {
+ /* The PCI device is not on this SSB GigE bridge device. */
+ return -ENODEV;
+ }
+
+ return ssb_mips_irq(sdev) + 2;
+}
+
+static struct ssb_driver ssb_gige_driver = {
+ .name = "BCM-GigE",
+ .id_table = ssb_gige_tbl,
+ .probe = ssb_gige_probe,
+};
+
+int ssb_gige_init(void)
+{
+ return ssb_driver_register(&ssb_gige_driver);
+}
/* fallthrough */
case SSB_DEV_PCI:
case SSB_DEV_ETHERNET:
+ case SSB_DEV_ETHERNET_GBIT:
case SSB_DEV_80211:
case SSB_DEV_USB20_HOST:
/* These devices get their own IRQ line if available, the rest goes on IRQ0 */
/* Core to access the external PCI config space. Can only have one. */
static struct ssb_pcicore *extpci_core;
-static u32 ssb_pcicore_pcibus_iobase = 0x100;
-static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
-
-int pcibios_plat_dev_init(struct pci_dev *d)
-{
- struct resource *res;
- int pos, size;
- u32 *base;
-
- ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
- pci_name(d));
-
- /* Fix up resource bases */
- for (pos = 0; pos < 6; pos++) {
- res = &d->resource[pos];
- if (res->flags & IORESOURCE_IO)
- base = &ssb_pcicore_pcibus_iobase;
- else
- base = &ssb_pcicore_pcibus_membase;
- res->flags |= IORESOURCE_PCI_FIXED;
- if (res->end) {
- size = res->end - res->start + 1;
- if (*base & (size - 1))
- *base = (*base + size) & ~(size - 1);
- res->start = *base;
- res->end = res->start + size - 1;
- *base += size;
- pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
- }
- /* Fix up PCI bridge BAR0 only */
- if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
- break;
- }
- /* Fix up interrupt lines */
- d->irq = ssb_mips_irq(extpci_core->dev) + 2;
- pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
-
- return 0;
-}
-
-static void __init ssb_fixup_pcibridge(struct pci_dev *dev)
-{
- u8 lat;
-
- if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
- return;
-
- ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
-
- /* Enable PCI bridge bus mastering and memory space */
- pci_set_master(dev);
- if (pcibios_enable_device(dev, ~0) < 0) {
- ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
- return;
- }
-
- /* Enable PCI bridge BAR1 prefetch and burst */
- pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
-
- /* Make sure our latency is high enough to handle the devices behind us */
- lat = 168;
- ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
- pci_name(dev), lat);
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge);
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- return ssb_mips_irq(extpci_core->dev) + 2;
-}
static u32 get_cfgspace_addr(struct ssb_pcicore *pc,
unsigned int bus, unsigned int dev,
.mem_offset = 0x24000000,
};
+static u32 ssb_pcicore_pcibus_iobase = 0x100;
+static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
+
+/* This function is called when doing a pci_enable_device().
+ * We must first check if the device is a device on the PCI-core bridge. */
+int ssb_pcicore_plat_dev_init(struct pci_dev *d)
+{
+ struct resource *res;
+ int pos, size;
+ u32 *base;
+
+ if (d->bus->ops != &ssb_pcicore_pciops) {
+ /* This is not a device on the PCI-core bridge. */
+ return -ENODEV;
+ }
+
+ ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
+ pci_name(d));
+
+ /* Fix up resource bases */
+ for (pos = 0; pos < 6; pos++) {
+ res = &d->resource[pos];
+ if (res->flags & IORESOURCE_IO)
+ base = &ssb_pcicore_pcibus_iobase;
+ else
+ base = &ssb_pcicore_pcibus_membase;
+ res->flags |= IORESOURCE_PCI_FIXED;
+ if (res->end) {
+ size = res->end - res->start + 1;
+ if (*base & (size - 1))
+ *base = (*base + size) & ~(size - 1);
+ res->start = *base;
+ res->end = res->start + size - 1;
+ *base += size;
+ pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
+ }
+ /* Fix up PCI bridge BAR0 only */
+ if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
+ break;
+ }
+ /* Fix up interrupt lines */
+ d->irq = ssb_mips_irq(extpci_core->dev) + 2;
+ pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
+
+ return 0;
+}
+
+/* Early PCI fixup for a device on the PCI-core bridge. */
+static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev)
+{
+ u8 lat;
+
+ if (dev->bus->ops != &ssb_pcicore_pciops) {
+ /* This is not a device on the PCI-core bridge. */
+ return;
+ }
+ if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
+ return;
+
+ ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
+
+ /* Enable PCI bridge bus mastering and memory space */
+ pci_set_master(dev);
+ if (pcibios_enable_device(dev, ~0) < 0) {
+ ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
+ return;
+ }
+
+ /* Enable PCI bridge BAR1 prefetch and burst */
+ pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
+
+ /* Make sure our latency is high enough to handle the devices behind us */
+ lat = 168;
+ ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
+ pci_name(dev), lat);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
+
+/* PCI device IRQ mapping. */
+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ if (dev->bus->ops != &ssb_pcicore_pciops) {
+ /* This is not a device on the PCI-core bridge. */
+ return -ENODEV;
+ }
+ return ssb_mips_irq(extpci_core->dev) + 2;
+}
+
static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
{
u32 val;
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
+#include <linux/ssb/ssb_driver_pci.h>
+#include <linux/ssb/ssb_driver_gige.h>
+#include <linux/pci.h>
#include "ssb_private.h"
return res;
}
EXPORT_SYMBOL(ssb_gpio_polarity);
+
+#ifdef CONFIG_SSB_DRIVER_GIGE
+static int gige_pci_init_callback(struct ssb_bus *bus, unsigned long data)
+{
+ struct pci_dev *pdev = (struct pci_dev *)data;
+ struct ssb_device *dev;
+ unsigned int i;
+ int res;
+
+ for (i = 0; i < bus->nr_devices; i++) {
+ dev = &(bus->devices[i]);
+ if (dev->id.coreid != SSB_DEV_ETHERNET_GBIT)
+ continue;
+ if (!dev->dev ||
+ !dev->dev->driver ||
+ !device_is_registered(dev->dev))
+ continue;
+ res = ssb_gige_pcibios_plat_dev_init(dev, pdev);
+ if (res >= 0)
+ return res;
+ }
+
+ return -ENODEV;
+}
+#endif /* CONFIG_SSB_DRIVER_GIGE */
+
+int ssb_pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ int err;
+
+ err = ssb_pcicore_plat_dev_init(dev);
+ if (!err)
+ return 0;
+#ifdef CONFIG_SSB_DRIVER_GIGE
+ err = ssb_for_each_bus_call((unsigned long)dev, gige_pci_init_callback);
+ if (err >= 0)
+ return err;
+#endif
+ /* This is not a PCI device on any SSB device. */
+
+ return -ENODEV;
+}
+
+#ifdef CONFIG_SSB_DRIVER_GIGE
+static int gige_map_irq_callback(struct ssb_bus *bus, unsigned long data)
+{
+ const struct pci_dev *pdev = (const struct pci_dev *)data;
+ struct ssb_device *dev;
+ unsigned int i;
+ int res;
+
+ for (i = 0; i < bus->nr_devices; i++) {
+ dev = &(bus->devices[i]);
+ if (dev->id.coreid != SSB_DEV_ETHERNET_GBIT)
+ continue;
+ if (!dev->dev ||
+ !dev->dev->driver ||
+ !device_is_registered(dev->dev))
+ continue;
+ res = ssb_gige_map_irq(dev, pdev);
+ if (res >= 0)
+ return res;
+ }
+
+ return -ENODEV;
+}
+#endif /* CONFIG_SSB_DRIVER_GIGE */
+
+int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int res;
+
+ /* Check if this PCI device is a device on a SSB bus or device
+ * and return the IRQ number for it. */
+
+ res = ssb_pcicore_pcibios_map_irq(dev, slot, pin);
+ if (res >= 0)
+ return res;
+#ifdef CONFIG_SSB_DRIVER_GIGE
+ res = ssb_for_each_bus_call((unsigned long)dev, gige_map_irq_callback);
+ if (res >= 0)
+ return res;
+#endif
+ /* This is not a PCI device on any SSB device. */
+
+ return -ENODEV;
+}
#include <linux/io.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_regs.h>
+#include <linux/ssb/ssb_driver_gige.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
}
#endif /* CONFIG_SSB_PCIHOST */
+int ssb_for_each_bus_call(unsigned long data,
+ int (*func)(struct ssb_bus *bus, unsigned long data))
+{
+ struct ssb_bus *bus;
+ int res;
+
+ ssb_buses_lock();
+ list_for_each_entry(bus, &buses, list) {
+ res = func(bus, data);
+ if (res >= 0) {
+ ssb_buses_unlock();
+ return res;
+ }
+ }
+ ssb_buses_unlock();
+
+ return -ENODEV;
+}
+
static struct ssb_device *ssb_device_get(struct ssb_device *dev)
{
if (dev)
err = b43_pci_ssb_bridge_init();
if (err) {
ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
- "initialization failed");
+ "initialization failed\n");
+ /* don't fail SSB init because of this */
+ err = 0;
+ }
+ err = ssb_gige_init();
+ if (err) {
+ ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
+ "driver initialization failed\n");
/* don't fail SSB init because of this */
err = 0;
}
static void __exit ssb_modexit(void)
{
+ ssb_gige_exit();
b43_pci_ssb_bridge_exit();
bus_unregister(&ssb_bustype);
}
extern int ssb_devices_freeze(struct ssb_bus *bus);
extern int ssb_devices_thaw(struct ssb_bus *bus);
extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
+int ssb_for_each_bus_call(unsigned long data,
+ int (*func)(struct ssb_bus *bus, unsigned long data));
/* b43_pci_bridge.c */
#ifdef CONFIG_SSB_B43_PCI_BRIDGE
extern u32 ssb_admatch_base(u32 adm);
extern u32 ssb_admatch_size(u32 adm);
+/* PCI device mapping and fixup routines.
+ * Called from the architecture pcibios init code.
+ * These are only available on SSB_EMBEDDED configurations. */
+#ifdef CONFIG_SSB_EMBEDDED
+int ssb_pcibios_plat_dev_init(struct pci_dev *dev);
+int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+#endif /* CONFIG_SSB_EMBEDDED */
#endif /* LINUX_SSB_H_ */
--- /dev/null
+#ifndef LINUX_SSB_DRIVER_GIGE_H_
+#define LINUX_SSB_DRIVER_GIGE_H_
+
+#include <linux/ssb/ssb.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+
+
+#ifdef CONFIG_SSB_DRIVER_GIGE
+
+
+#define SSB_GIGE_PCIIO 0x0000 /* PCI I/O Registers (1024 bytes) */
+#define SSB_GIGE_RESERVED 0x0400 /* Reserved (1024 bytes) */
+#define SSB_GIGE_PCICFG 0x0800 /* PCI config space (256 bytes) */
+#define SSB_GIGE_SHIM_FLUSHSTAT 0x0C00 /* PCI to OCP: Flush status control (32bit) */
+#define SSB_GIGE_SHIM_FLUSHRDA 0x0C04 /* PCI to OCP: Flush read address (32bit) */
+#define SSB_GIGE_SHIM_FLUSHTO 0x0C08 /* PCI to OCP: Flush timeout counter (32bit) */
+#define SSB_GIGE_SHIM_BARRIER 0x0C0C /* PCI to OCP: Barrier register (32bit) */
+#define SSB_GIGE_SHIM_MAOCPSI 0x0C10 /* PCI to OCP: MaocpSI Control (32bit) */
+#define SSB_GIGE_SHIM_SIOCPMA 0x0C14 /* PCI to OCP: SiocpMa Control (32bit) */
+
+/* TM Status High flags */
+#define SSB_GIGE_TMSHIGH_RGMII 0x00010000 /* Have an RGMII PHY-bus */
+/* TM Status Low flags */
+#define SSB_GIGE_TMSLOW_TXBYPASS 0x00080000 /* TX bypass (no delay) */
+#define SSB_GIGE_TMSLOW_RXBYPASS 0x00100000 /* RX bypass (no delay) */
+#define SSB_GIGE_TMSLOW_DLLEN 0x01000000 /* Enable DLL controls */
+
+/* Boardflags (low) */
+#define SSB_GIGE_BFL_ROBOSWITCH 0x0010
+
+
+#define SSB_GIGE_MEM_RES_NAME "SSB Broadcom 47xx GigE memory"
+#define SSB_GIGE_IO_RES_NAME "SSB Broadcom 47xx GigE I/O"
+
+struct ssb_gige {
+ struct ssb_device *dev;
+
+ spinlock_t lock;
+
+ /* True, if the device has an RGMII bus.
+ * False, if the device has a GMII bus. */
+ bool has_rgmii;
+
+ /* The PCI controller device. */
+ struct pci_controller pci_controller;
+ struct pci_ops pci_ops;
+ struct resource mem_resource;
+ struct resource io_resource;
+};
+
+/* Check whether a PCI device is a SSB Gigabit Ethernet core. */
+extern bool pdev_is_ssb_gige_core(struct pci_dev *pdev);
+
+/* Convert a pci_dev pointer to a ssb_gige pointer. */
+static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
+{
+ if (!pdev_is_ssb_gige_core(pdev))
+ return NULL;
+ return container_of(pdev->bus->ops, struct ssb_gige, pci_ops);
+}
+
+/* Returns whether the PHY is connected by an RGMII bus. */
+static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
+{
+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+ return (dev ? dev->has_rgmii : 0);
+}
+
+/* Returns whether we have a Roboswitch. */
+static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
+{
+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+ if (dev)
+ return !!(dev->dev->bus->sprom.boardflags_lo &
+ SSB_GIGE_BFL_ROBOSWITCH);
+ return 0;
+}
+
+/* Returns whether we can only do one DMA at once. */
+static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
+{
+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+ if (dev)
+ return ((dev->dev->bus->chip_id == 0x4785) &&
+ (dev->dev->bus->chip_rev < 2));
+ return 0;
+}
+
+/* Returns whether we must flush posted writes. */
+static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
+{
+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+ if (dev)
+ return (dev->dev->bus->chip_id == 0x4785);
+ return 0;
+}
+
+extern char * nvram_get(const char *name);
+/* Get the device MAC address */
+static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+{
+#ifdef CONFIG_BCM947XX
+ char *res = nvram_get("et0macaddr");
+ if (res)
+ memcpy(macaddr, res, 6);
+#endif
+}
+
+extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
+ struct pci_dev *pdev);
+extern int ssb_gige_map_irq(struct ssb_device *sdev,
+ const struct pci_dev *pdev);
+
+/* The GigE driver is not a standalone module, because we don't have support
+ * for unregistering the driver. So we could not unload the module anyway. */
+extern int ssb_gige_init(void);
+static inline void ssb_gige_exit(void)
+{
+ /* Currently we can not unregister the GigE driver,
+ * because we can not unregister the PCI bridge. */
+ BUG();
+}
+
+
+#else /* CONFIG_SSB_DRIVER_GIGE */
+/* Gigabit Ethernet driver disabled */
+
+
+static inline int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
+ struct pci_dev *pdev)
+{
+ return -ENOSYS;
+}
+static inline int ssb_gige_map_irq(struct ssb_device *sdev,
+ const struct pci_dev *pdev)
+{
+ return -ENOSYS;
+}
+static inline int ssb_gige_init(void)
+{
+ return 0;
+}
+static inline void ssb_gige_exit(void)
+{
+}
+
+static inline bool pdev_is_ssb_gige_core(struct pci_dev *pdev)
+{
+ return 0;
+}
+static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
+{
+ return NULL;
+}
+static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
+{
+ return 0;
+}
+static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
+{
+ return 0;
+}
+static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
+{
+ return 0;
+}
+static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
+{
+ return 0;
+}
+
+#endif /* CONFIG_SSB_DRIVER_GIGE */
+#endif /* LINUX_SSB_DRIVER_GIGE_H_ */
#ifndef LINUX_SSB_PCICORE_H_
#define LINUX_SSB_PCICORE_H_
+#include <linux/types.h>
+
+struct pci_dev;
+
+
#ifdef CONFIG_SSB_DRIVER_PCICORE
/* PCI core registers. */
extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
struct ssb_device *dev);
+int ssb_pcicore_plat_dev_init(struct pci_dev *d);
+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+
#else /* CONFIG_SSB_DRIVER_PCICORE */
return 0;
}
+static inline
+int ssb_pcicore_plat_dev_init(struct pci_dev *d)
+{
+ return -ENODEV;
+}
+static inline
+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return -ENODEV;
+}
+
#endif /* CONFIG_SSB_DRIVER_PCICORE */
#endif /* LINUX_SSB_PCICORE_H_ */
projects / linux-2.6-omap-h63xx.git / commitdiff