[SCSI] mptfusion - bus_type, change SCSI to SPI

This changes to SPI for the bus_type enumeration.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 4262a22adc22d469a4a1e4991714443c04c03ec2..537836068c493736d1efc7a3139974d16faeacc1 100644 (file)
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -313,13 +313,13 @@ mpt_reply(MPT_ADAPTER *ioc, u32 pa)
                u32      log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
                if (ioc->bus_type == FC)
                        mpt_fc_log_info(ioc, log_info);
-               else if (ioc->bus_type == SCSI)
+               else if (ioc->bus_type == SPI)
                        mpt_sp_log_info(ioc, log_info);
                else if (ioc->bus_type == SAS)
                        mpt_sas_log_info(ioc, log_info);
        }
        if (ioc_stat & MPI_IOCSTATUS_MASK) {
-               if (ioc->bus_type == SCSI &&
+               if (ioc->bus_type == SPI &&
                    cb_idx != mpt_stm_index &&
                    cb_idx != mpt_lan_index)
                        mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf);
@@ -1376,7 +1376,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
        }
        else if (pdev->device == MPI_MANUFACTPAGE_DEVID_53C1030) {
                ioc->prod_name = "LSI53C1030";
-               ioc->bus_type = SCSI;
+               ioc->bus_type = SPI;
                /* 1030 Chip Fix. Disable Split transactions
                 * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
                 */
@@ -1389,7 +1389,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
        }
        else if (pdev->device == MPI_MANUFACTPAGE_DEVID_1030_53C1035) {
                ioc->prod_name = "LSI53C1035";
-               ioc->bus_type = SCSI;
+               ioc->bus_type = SPI;
        }
        else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1064) {
                ioc->prod_name = "LSISAS1064";
@@ -3042,7 +3042,7 @@ mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
        /* Clear the internal flash bad bit - autoincrementing register,
         * so must do two writes.
         */
-       if (ioc->bus_type == SCSI) {
+       if (ioc->bus_type == SPI) {
                /*
                 * 1030 and 1035 H/W errata, workaround to access
                 * the ClearFlashBadSignatureBit
@@ -3152,7 +3152,7 @@ KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
        int cnt,cntdn;
 
        dinitprintk((KERN_WARNING MYNAM ": KickStarting %s!\n", ioc->name));
-       if (ioc->bus_type == SCSI) {
+       if (ioc->bus_type == SPI) {
                /* Always issue a Msg Unit Reset first. This will clear some
                 * SCSI bus hang conditions.
                 */
@@ -3580,7 +3580,7 @@ initChainBuffers(MPT_ADAPTER *ioc)
        dinitprintk((KERN_INFO MYNAM ": %s Now numSGE=%d num_sge=%d num_chain=%d\n",
                ioc->name, numSGE, num_sge, num_chain));
 
-       if (ioc->bus_type == SCSI)
+       if (ioc->bus_type == SPI)
                num_chain *= MPT_SCSI_CAN_QUEUE;
        else
                num_chain *= MPT_FC_CAN_QUEUE;

diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index bac8eb4186d2f83cada0550f07ca319d584a2b17..7a6c114184525927a24e97eabf947f78aa3d74db 100644 (file)
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -903,7 +903,7 @@ typedef struct _MPT_LOCAL_REPLY {
 
 typedef enum {
        FC,
-       SCSI,
+       SPI,
        SAS
 } BUS_TYPE;
 

diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index b7b9846ff3fd960859bd077f2716e95a9ab23dd7..2d014248b799bb72a470256546753fce3283c3db 100644 (file)
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -677,7 +677,7 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
                        sc->result = DID_RESET << 16;
 
                        /* GEM Workaround. */
-                       if (ioc->bus_type == SCSI)
+                       if (ioc->bus_type == SPI)
                                mptscsih_no_negotiate(hd, sc->device->id);
                        break;
 
@@ -1403,7 +1403,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
        SCpnt->host_scribble = NULL;
 
 #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
-       if (hd->ioc->bus_type == SCSI) {
+       if (hd->ioc->bus_type == SPI) {
                int dvStatus = hd->ioc->spi_data.dvStatus[pTarget->target_id];
                int issueCmd = 1;
 
@@ -2183,7 +2183,7 @@ mptscsih_slave_alloc(struct scsi_device *device)
        vdev->bus_id = device->channel;
        vdev->raidVolume = 0;
        hd->Targets[device->id] = vdev;
-       if (hd->ioc->bus_type == SCSI) {
+       if (hd->ioc->bus_type == SPI) {
                if (hd->ioc->raid_data.isRaid & (1 << device->id)) {
                        vdev->raidVolume = 1;
                        ddvtprintk((KERN_INFO
@@ -2225,7 +2225,7 @@ mptscsih_slave_destroy(struct scsi_device *device)
        kfree(hd->Targets[target]);
        hd->Targets[target] = NULL;
 
-       if (hd->ioc->bus_type == SCSI) {
+       if (hd->ioc->bus_type == SPI) {
                if (mptscsih_is_phys_disk(hd->ioc, target)) {
                        hd->ioc->spi_data.forceDv |= MPT_SCSICFG_RELOAD_IOC_PG3;
                } else {
@@ -2261,7 +2261,7 @@ mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
        if (!(pTarget = hd->Targets[sdev->id]))
                return 0;
 
-       if (hd->ioc->bus_type == SCSI) {
+       if (hd->ioc->bus_type == SPI) {
                if (pTarget->tflags & MPT_TARGET_FLAGS_VALID_INQUIRY) {
                        if (!(pTarget->tflags & MPT_TARGET_FLAGS_Q_YES))
                                max_depth = 1;
@@ -2503,9 +2503,9 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
                /* 2. Chain Buffer initialization
                 */
 
-               /* 4. Renegotiate to all devices, if SCSI
+               /* 4. Renegotiate to all devices, if SPI
                 */
-               if (ioc->bus_type == SCSI) {
+               if (ioc->bus_type == SPI) {
                        dnegoprintk(("writeSDP1: ALL_IDS USE_NVRAM\n"));
                        mptscsih_writeSDP1(hd, 0, 0, MPT_SCSICFG_ALL_IDS | MPT_SCSICFG_USE_NVRAM);
                }
@@ -2534,7 +2534,7 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 
                /* 7. Set flag to force DV and re-read IOC Page 3
                 */
-               if (ioc->bus_type == SCSI) {
+               if (ioc->bus_type == SPI) {
                        ioc->spi_data.forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3;
                        ddvtprintk(("Set reload IOC Pg3 Flag\n"));
                }
@@ -2576,7 +2576,7 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
                break;
        case MPI_EVENT_IOC_BUS_RESET:                   /* 04 */
        case MPI_EVENT_EXT_BUS_RESET:                   /* 05 */
-               if (hd && (ioc->bus_type == SCSI) && (hd->soft_resets < -1))
+               if (hd && (ioc->bus_type == SPI) && (hd->soft_resets < -1))
                        hd->soft_resets++;
                break;
        case MPI_EVENT_LOGOUT:                          /* 09 */
@@ -2601,7 +2601,7 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
                    (pMpiEventDataRaid_t) pEvReply->Data;
 #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
                /* Domain Validation Needed */
-               if (ioc->bus_type == SCSI &&
+               if (ioc->bus_type == SPI &&
                    pRaidEventData->ReasonCode ==
                    MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED)
                        mptscsih_set_dvflags_raid(hd, pRaidEventData->PhysDiskNum);
@@ -2682,7 +2682,7 @@ mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char *
        indexed_lun = (lun % 32);
        vdev->luns[lun_index] |= (1 << indexed_lun);
 
-       if (hd->ioc->bus_type == SCSI) {
+       if (hd->ioc->bus_type == SPI) {
                if ((data[0] == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) {
                        /* Treat all Processors as SAF-TE if
                         * command line option is set */
@@ -3956,10 +3956,10 @@ mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum)
        if (id == hostId)
                id++;
 
-       /* Write SDP1 for all SCSI devices
+       /* Write SDP1 for all SPI devices
         * Alloc memory and set up config buffer
         */
-       if (ioc->bus_type == SCSI) {
+       if (ioc->bus_type == SPI) {
                if (ioc->spi_data.sdp1length > 0) {
                        pcfg1Data = (SCSIDevicePage1_t *)pci_alloc_consistent(ioc->pcidev,
                                         ioc->spi_data.sdp1length * 4, &cfg1_dma_addr);
@@ -4101,8 +4101,8 @@ mptscsih_domainValidation(void *arg)
 
                        msleep(250);
 
-                       /* DV only to SCSI adapters */
-                       if (ioc->bus_type != SCSI)
+                       /* DV only to SPI adapters */
+                       if (ioc->bus_type != SPI)
                                continue;
 
                        /* Make sure everything looks ok */