select RFKILL
select INPUT_POLLDEV
+config RT2X00_LIB_LEDS
+ boolean
+ depends on RT2X00_LIB
+ select LEDS_CLASS
+ select LEDS_TRIGGERS
+ select MAC80211_LEDS
+
config RT2400PCI
tristate "Ralink rt2400 pci/pcmcia support"
depends on RT2X00 && PCI
hardware button to control the radio state.
This feature depends on the RF switch subsystem rfkill.
+config RT2400PCI_LEDS
+ bool "RT2400 leds support"
+ depends on RT2400PCI
+ select RT2X00_LIB_LEDS
+ ---help---
+ This adds support for led triggers provided my mac80211.
+
config RT2500PCI
tristate "Ralink rt2500 pci/pcmcia support"
depends on RT2X00 && PCI
hardware button to control the radio state.
This feature depends on the RF switch subsystem rfkill.
+config RT2500PCI_LEDS
+ bool "RT2500 leds support"
+ depends on RT2500PCI
+ select RT2X00_LIB_LEDS
+ ---help---
+ This adds support for led triggers provided my mac80211.
+
config RT61PCI
tristate "Ralink rt61 pci/pcmcia support"
depends on RT2X00 && PCI
hardware button to control the radio state.
This feature depends on the RF switch subsystem rfkill.
+config RT61PCI_LEDS
+ bool "RT61 leds support"
+ depends on RT61PCI
+ select RT2X00_LIB_LEDS
+ ---help---
+ This adds support for led triggers provided my mac80211.
+
config RT2500USB
tristate "Ralink rt2500 usb support"
depends on RT2X00 && USB
rt2x00lib-objs += rt2x00firmware.o
endif
+ifeq ($(CONFIG_RT2X00_LIB_LEDS),y)
+ rt2x00lib-objs += rt2x00leds.o
+endif
+
obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o
obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o
obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00usb.o
#define rt2400pci_rfkill_poll NULL
#endif /* CONFIG_RT2400PCI_RFKILL */
+#ifdef CONFIG_RT2400PCI_LEDS
+static void rt2400pci_led_brightness(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct rt2x00_led *led =
+ container_of(led_cdev, struct rt2x00_led, led_dev);
+ unsigned int enabled = brightness != LED_OFF;
+ unsigned int activity =
+ led->rt2x00dev->led_flags & LED_SUPPORT_ACTIVITY;
+ u32 reg;
+
+ rt2x00pci_register_read(led->rt2x00dev, LEDCSR, ®);
+
+ if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC) {
+ rt2x00_set_field32(®, LEDCSR_LINK, enabled);
+ rt2x00_set_field32(®, LEDCSR_ACTIVITY, enabled && activity);
+ }
+
+ rt2x00pci_register_write(led->rt2x00dev, LEDCSR, reg);
+}
+#else
+#define rt2400pci_led_brightness NULL
+#endif /* CONFIG_RT2400PCI_LEDS */
+
/*
* Configuration handlers.
*/
rt2x00pci_register_write(rt2x00dev, CSR11, reg);
}
-/*
- * LED functions.
- */
-static void rt2400pci_enable_led(struct rt2x00_dev *rt2x00dev)
-{
- u32 reg;
-
- rt2x00pci_register_read(rt2x00dev, LEDCSR, ®);
-
- rt2x00_set_field32(®, LEDCSR_ON_PERIOD, 70);
- rt2x00_set_field32(®, LEDCSR_OFF_PERIOD, 30);
- rt2x00_set_field32(®, LEDCSR_LINK,
- (rt2x00dev->led_mode != LED_MODE_ASUS));
- rt2x00_set_field32(®, LEDCSR_ACTIVITY,
- (rt2x00dev->led_mode != LED_MODE_TXRX_ACTIVITY));
- rt2x00pci_register_write(rt2x00dev, LEDCSR, reg);
-}
-
-static void rt2400pci_disable_led(struct rt2x00_dev *rt2x00dev)
-{
- u32 reg;
-
- rt2x00pci_register_read(rt2x00dev, LEDCSR, ®);
- rt2x00_set_field32(®, LEDCSR_LINK, 0);
- rt2x00_set_field32(®, LEDCSR_ACTIVITY, 0);
- rt2x00pci_register_write(rt2x00dev, LEDCSR, reg);
-}
-
/*
* Link tuning
*/
(rt2x00dev->rx->data_size / 128));
rt2x00pci_register_write(rt2x00dev, CSR9, reg);
+ rt2x00pci_register_read(rt2x00dev, LEDCSR, ®);
+ rt2x00_set_field32(®, LEDCSR_ON_PERIOD, 70);
+ rt2x00_set_field32(®, LEDCSR_OFF_PERIOD, 30);
+ rt2x00pci_register_write(rt2x00dev, LEDCSR, reg);
+
rt2x00pci_register_write(rt2x00dev, CNT3, 0x3f080000);
rt2x00pci_register_read(rt2x00dev, ARCSR0, ®);
*/
rt2400pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON);
- /*
- * Enable LED
- */
- rt2400pci_enable_led(rt2x00dev);
-
return 0;
}
{
u32 reg;
- /*
- * Disable LED
- */
- rt2400pci_disable_led(rt2x00dev);
-
rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0);
/*
/*
* Store led mode, for correct led behaviour.
*/
- rt2x00dev->led_mode =
- rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
+#ifdef CONFIG_RT2400PCI_LEDS
+ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
+
+ switch (value) {
+ case LED_MODE_ASUS:
+ case LED_MODE_ALPHA:
+ case LED_MODE_DEFAULT:
+ rt2x00dev->led_flags = LED_SUPPORT_RADIO;
+ break;
+ case LED_MODE_TXRX_ACTIVITY:
+ rt2x00dev->led_flags =
+ LED_SUPPORT_RADIO | LED_SUPPORT_ACTIVITY;
+ break;
+ case LED_MODE_SIGNAL_STRENGTH:
+ rt2x00dev->led_flags = LED_SUPPORT_RADIO;
+ break;
+ }
+#endif /* CONFIG_RT2400PCI_LEDS */
/*
* Detect if this device has an hardware controlled radio.
.link_stats = rt2400pci_link_stats,
.reset_tuner = rt2400pci_reset_tuner,
.link_tuner = rt2400pci_link_tuner,
+ .led_brightness = rt2400pci_led_brightness,
.write_tx_desc = rt2400pci_write_tx_desc,
.write_tx_data = rt2x00pci_write_tx_data,
.kick_tx_queue = rt2400pci_kick_tx_queue,
#define rt2500pci_rfkill_poll NULL
#endif /* CONFIG_RT2500PCI_RFKILL */
+#ifdef CONFIG_RT2500PCI_LEDS
+static void rt2500pci_led_brightness(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct rt2x00_led *led =
+ container_of(led_cdev, struct rt2x00_led, led_dev);
+ unsigned int enabled = brightness != LED_OFF;
+ unsigned int activity =
+ led->rt2x00dev->led_flags & LED_SUPPORT_ACTIVITY;
+ u32 reg;
+
+ rt2x00pci_register_read(led->rt2x00dev, LEDCSR, ®);
+
+ if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC) {
+ rt2x00_set_field32(®, LEDCSR_LINK, enabled);
+ rt2x00_set_field32(®, LEDCSR_ACTIVITY, enabled && activity);
+ }
+
+ rt2x00pci_register_write(led->rt2x00dev, LEDCSR, reg);
+}
+#else
+#define rt2500pci_led_brightness NULL
+#endif /* CONFIG_RT2500PCI_LEDS */
+
/*
* Configuration handlers.
*/
rt2500pci_config_duration(rt2x00dev, libconf);
}
-/*
- * LED functions.
- */
-static void rt2500pci_enable_led(struct rt2x00_dev *rt2x00dev)
-{
- u32 reg;
-
- rt2x00pci_register_read(rt2x00dev, LEDCSR, ®);
-
- rt2x00_set_field32(®, LEDCSR_ON_PERIOD, 70);
- rt2x00_set_field32(®, LEDCSR_OFF_PERIOD, 30);
- rt2x00_set_field32(®, LEDCSR_LINK,
- (rt2x00dev->led_mode != LED_MODE_ASUS));
- rt2x00_set_field32(®, LEDCSR_ACTIVITY,
- (rt2x00dev->led_mode != LED_MODE_TXRX_ACTIVITY));
- rt2x00pci_register_write(rt2x00dev, LEDCSR, reg);
-}
-
-static void rt2500pci_disable_led(struct rt2x00_dev *rt2x00dev)
-{
- u32 reg;
-
- rt2x00pci_register_read(rt2x00dev, LEDCSR, ®);
- rt2x00_set_field32(®, LEDCSR_LINK, 0);
- rt2x00_set_field32(®, LEDCSR_ACTIVITY, 0);
- rt2x00pci_register_write(rt2x00dev, LEDCSR, reg);
-}
-
/*
* Link tuning
*/
rt2x00_set_field32(®, CSR11_CW_SELECT, 0);
rt2x00pci_register_write(rt2x00dev, CSR11, reg);
+ rt2x00pci_register_read(rt2x00dev, LEDCSR, ®);
+ rt2x00_set_field32(®, LEDCSR_ON_PERIOD, 70);
+ rt2x00_set_field32(®, LEDCSR_OFF_PERIOD, 30);
+ rt2x00pci_register_write(rt2x00dev, LEDCSR, reg);
+
rt2x00pci_register_write(rt2x00dev, CNT3, 0);
rt2x00pci_register_read(rt2x00dev, TXCSR8, ®);
*/
rt2500pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON);
- /*
- * Enable LED
- */
- rt2500pci_enable_led(rt2x00dev);
-
return 0;
}
{
u32 reg;
- /*
- * Disable LED
- */
- rt2500pci_disable_led(rt2x00dev);
-
rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0);
/*
/*
* Store led mode, for correct led behaviour.
*/
- rt2x00dev->led_mode =
- rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
+#ifdef CONFIG_RT2500PCI_LEDS
+ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
+
+ switch (value) {
+ case LED_MODE_ASUS:
+ case LED_MODE_ALPHA:
+ case LED_MODE_DEFAULT:
+ rt2x00dev->led_flags = LED_SUPPORT_RADIO;
+ break;
+ case LED_MODE_TXRX_ACTIVITY:
+ rt2x00dev->led_flags =
+ LED_SUPPORT_RADIO | LED_SUPPORT_ACTIVITY;
+ break;
+ case LED_MODE_SIGNAL_STRENGTH:
+ rt2x00dev->led_flags = LED_SUPPORT_RADIO;
+ break;
+ }
+#endif /* CONFIG_RT2500PCI_LEDS */
/*
* Detect if this device has an hardware controlled radio.
.link_stats = rt2500pci_link_stats,
.reset_tuner = rt2500pci_reset_tuner,
.link_tuner = rt2500pci_link_tuner,
+ .led_brightness = rt2500pci_led_brightness,
.write_tx_desc = rt2500pci_write_tx_desc,
.write_tx_data = rt2x00pci_write_tx_data,
.kick_tx_queue = rt2500pci_kick_tx_queue,
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+#ifdef CONFIG_RT2500USB_LEDS
+static void rt2500usb_led_brightness(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct rt2x00_led *led =
+ container_of(led_cdev, struct rt2x00_led, led_dev);
+ unsigned int enabled = brightness != LED_OFF;
+ unsigned int activity =
+ led->rt2x00dev->led_flags & LED_SUPPORT_ACTIVITY;
+ u16 reg;
+
+ rt2500usb_register_read(led->rt2x00dev, MAC_CSR20, ®);
+
+ if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC) {
+ rt2x00_set_field16(®, MAC_CSR20_LINK, enabled);
+ rt2x00_set_field16(®, MAC_CSR20_ACTIVITY,
+ enabled && activity);
+ }
+
+ rt2500usb_register_write(led->rt2x00dev, MAC_CSR20, reg);
+}
+#else
+#define rt2500usb_led_brightness NULL
+#endif /* CONFIG_RT2500USB_LEDS */
+
/*
* Configuration handlers.
*/
rt2500usb_config_duration(rt2x00dev, libconf);
}
-/*
- * LED functions.
- */
-static void rt2500usb_enable_led(struct rt2x00_dev *rt2x00dev)
-{
- u16 reg;
-
- rt2500usb_register_read(rt2x00dev, MAC_CSR21, ®);
- rt2x00_set_field16(®, MAC_CSR21_ON_PERIOD, 70);
- rt2x00_set_field16(®, MAC_CSR21_OFF_PERIOD, 30);
- rt2500usb_register_write(rt2x00dev, MAC_CSR21, reg);
-
- rt2500usb_register_read(rt2x00dev, MAC_CSR20, ®);
- rt2x00_set_field16(®, MAC_CSR20_LINK,
- (rt2x00dev->led_mode != LED_MODE_ASUS));
- rt2x00_set_field16(®, MAC_CSR20_ACTIVITY,
- (rt2x00dev->led_mode != LED_MODE_TXRX_ACTIVITY));
- rt2500usb_register_write(rt2x00dev, MAC_CSR20, reg);
-}
-
-static void rt2500usb_disable_led(struct rt2x00_dev *rt2x00dev)
-{
- u16 reg;
-
- rt2500usb_register_read(rt2x00dev, MAC_CSR20, ®);
- rt2x00_set_field16(®, MAC_CSR20_LINK, 0);
- rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 0);
- rt2500usb_register_write(rt2x00dev, MAC_CSR20, reg);
-}
-
/*
* Link tuning
*/
rt2x00_set_field16(®, MAC_CSR1_HOST_READY, 0);
rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
+ rt2500usb_register_read(rt2x00dev, MAC_CSR21, ®);
+ rt2x00_set_field16(®, MAC_CSR21_ON_PERIOD, 70);
+ rt2x00_set_field16(®, MAC_CSR21_OFF_PERIOD, 30);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR21, reg);
+
rt2500usb_register_read(rt2x00dev, TXRX_CSR5, ®);
rt2x00_set_field16(®, TXRX_CSR5_BBP_ID0, 13);
rt2x00_set_field16(®, TXRX_CSR5_BBP_ID0_VALID, 1);
return -EIO;
}
- /*
- * Enable LED
- */
- rt2500usb_enable_led(rt2x00dev);
-
return 0;
}
static void rt2500usb_disable_radio(struct rt2x00_dev *rt2x00dev)
{
- /*
- * Disable LED
- */
- rt2500usb_disable_led(rt2x00dev);
-
rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x2121);
rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x2121);
/*
* Store led mode, for correct led behaviour.
*/
- rt2x00dev->led_mode =
- rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
+#ifdef CONFIG_RT2500USB_LEDS
+ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
+
+ switch (value) {
+ case LED_MODE_ASUS:
+ case LED_MODE_ALPHA:
+ case LED_MODE_DEFAULT:
+ rt2x00dev->led_flags = LED_SUPPORT_RADIO;
+ break;
+ case LED_MODE_TXRX_ACTIVITY:
+ rt2x00dev->led_flags =
+ LED_SUPPORT_RADIO | LED_SUPPORT_ACTIVITY;
+ break;
+ case LED_MODE_SIGNAL_STRENGTH:
+ rt2x00dev->led_flags = LED_SUPPORT_RADIO;
+ break;
+ }
+#endif /* CONFIG_RT2500USB_LEDS */
/*
* Check if the BBP tuning should be disabled.
.link_stats = rt2500usb_link_stats,
.reset_tuner = rt2500usb_reset_tuner,
.link_tuner = rt2500usb_link_tuner,
+ .led_brightness = rt2500usb_led_brightness,
.write_tx_desc = rt2500usb_write_tx_desc,
.write_tx_data = rt2x00usb_write_tx_data,
.get_tx_data_len = rt2500usb_get_tx_data_len,
#include <linux/skbuff.h>
#include <linux/workqueue.h>
#include <linux/firmware.h>
+#include <linux/leds.h>
#include <linux/mutex.h>
#include <linux/etherdevice.h>
#include <net/mac80211.h>
#include "rt2x00debug.h"
+#include "rt2x00leds.h"
#include "rt2x00reg.h"
#include "rt2x00queue.h"
struct link_qual *qual);
void (*reset_tuner) (struct rt2x00_dev *rt2x00dev);
void (*link_tuner) (struct rt2x00_dev *rt2x00dev);
+ void (*led_brightness) (struct led_classdev *led_cdev,
+ enum led_brightness brightness);
/*
* TX control handlers
struct rt2x00debug_intf *debugfs_intf;
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+ /*
+ * LED structure for changing the LED status
+ * by mac8011 or the kernel.
+ */
+#ifdef CONFIG_RT2X00_LIB_LEDS
+ unsigned int led_flags;
+ struct rt2x00_trigger trigger_qual;
+ struct rt2x00_led led_radio;
+ struct rt2x00_led led_assoc;
+ struct rt2x00_led led_qual;
+ u16 led_mcu_reg;
+#endif /* CONFIG_RT2X00_LIB_LEDS */
+
/*
* Device flags.
* In these flags the current status and some
*/
u16 tx_power;
- /*
- * LED register (for rt61pci & rt73usb).
- */
- u16 led_reg;
-
- /*
- * Led mode (LED_MODE_*)
- */
- u8 led_mode;
-
/*
* Rssi <-> Dbm offset
*/
*/
rt2x00lib_precalculate_link_signal(&rt2x00dev->link.qual);
+ /*
+ * Send a signal to the led to update the led signal strength.
+ */
+ rt2x00leds_led_quality(rt2x00dev, rt2x00dev->link.qual.avg_rssi);
+
/*
* Evaluate antenna setup, make this the last step since this could
* possibly reset some statistics.
goto exit;
}
+ /*
+ * Register LED.
+ */
+ rt2x00leds_register(rt2x00dev);
+
/*
* Allocatie rfkill.
*/
*/
rt2x00rfkill_free(rt2x00dev);
+ /*
+ * Free LED.
+ */
+ rt2x00leds_unregister(rt2x00dev);
+
/*
* Free ieee80211_hw memory.
*/
*/
rt2x00lib_stop(rt2x00dev);
rt2x00lib_uninitialize(rt2x00dev);
+ rt2x00leds_suspend(rt2x00dev);
rt2x00debug_deregister(rt2x00dev);
exit:
NOTICE(rt2x00dev, "Waking up.\n");
/*
- * Open the debugfs entry.
+ * Open the debugfs entry and restore led handling.
*/
rt2x00debug_register(rt2x00dev);
+ rt2x00leds_resume(rt2x00dev);
/*
* Only continue if mac80211 had open interfaces.
}
#endif /* CONFIG_RT2X00_LIB_RFKILL */
+/*
+ * LED handlers
+ */
+#ifdef CONFIG_RT2X00_LIB_LEDS
+void rt2x00leds_led_quality(struct rt2x00_dev *rt2x00dev, int rssi);
+int rt2x00leds_register(struct rt2x00_dev *rt2x00dev);
+void rt2x00leds_unregister(struct rt2x00_dev *rt2x00dev);
+void rt2x00leds_suspend(struct rt2x00_dev *rt2x00dev);
+void rt2x00leds_resume(struct rt2x00_dev *rt2x00dev);
+#else
+static inline void rt2x00leds_led_quality(struct rt2x00_dev *rt2x00dev,
+ int rssi)
+{
+}
+
+static inline int rt2x00leds_register(struct rt2x00_dev *rt2x00dev)
+{
+ return 0;
+}
+
+static inline void rt2x00leds_unregister(struct rt2x00_dev *rt2x00dev)
+{
+}
+
+static inline void rt2x00leds_suspend(struct rt2x00_dev *rt2x00dev)
+{
+}
+
+static inline void rt2x00leds_resume(struct rt2x00_dev *rt2x00dev)
+{
+}
+#endif /* CONFIG_RT2X00_LIB_LEDS */
+
#endif /* RT2X00LIB_H */
rt2x00_rf_write(rt2x00dev, word, value);
}
+#ifdef CONFIG_RT61PCI_LEDS
+/*
+ * This function is only called from rt61pci_led_brightness()
+ * make gcc happy by placing this function inside the
+ * same ifdef statement as the caller.
+ */
static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev,
const u8 command, const u8 token,
const u8 arg0, const u8 arg1)
rt2x00_set_field32(®, HOST_CMD_CSR_INTERRUPT_MCU, 1);
rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg);
}
+#endif /* CONFIG_RT61PCI_LEDS */
static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
{
#define rt61pci_rfkill_poll NULL
#endif /* CONFIG_RT61PCI_RFKILL */
+#ifdef CONFIG_RT61PCI_LEDS
+static void rt61pci_led_brightness(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct rt2x00_led *led =
+ container_of(led_cdev, struct rt2x00_led, led_dev);
+ unsigned int enabled = brightness != LED_OFF;
+ unsigned int a_mode =
+ (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
+ unsigned int bg_mode =
+ (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
+
+ if (led->type == LED_TYPE_RADIO) {
+ rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
+ MCU_LEDCS_RADIO_STATUS, enabled);
+
+ rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff,
+ (led->rt2x00dev->led_mcu_reg & 0xff),
+ ((led->rt2x00dev->led_mcu_reg >> 8)));
+ } else if (led->type == LED_TYPE_ASSOC) {
+ rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
+ MCU_LEDCS_LINK_BG_STATUS, bg_mode);
+ rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
+ MCU_LEDCS_LINK_A_STATUS, a_mode);
+
+ rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff,
+ (led->rt2x00dev->led_mcu_reg & 0xff),
+ ((led->rt2x00dev->led_mcu_reg >> 8)));
+ } else if (led->type == LED_TYPE_QUALITY) {
+ /*
+ * The brightness is divided into 6 levels (0 - 5),
+ * this means we need to convert the brightness
+ * argument into the matching level within that range.
+ */
+ rt61pci_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
+ brightness / (LED_FULL / 6), 0);
+ }
+}
+#else
+#define rt61pci_led_brightness NULL
+#endif /* CONFIG_RT61PCI_LEDS */
+
/*
* Configuration handlers.
*/
rt61pci_config_duration(rt2x00dev, libconf);
}
-/*
- * LED functions.
- */
-static void rt61pci_enable_led(struct rt2x00_dev *rt2x00dev)
-{
- u32 reg;
- u8 arg0;
- u8 arg1;
-
- rt2x00pci_register_read(rt2x00dev, MAC_CSR14, ®);
- rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, 70);
- rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, 30);
- rt2x00pci_register_write(rt2x00dev, MAC_CSR14, reg);
-
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 1);
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_A_STATUS,
- rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ);
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_BG_STATUS,
- rt2x00dev->rx_status.band != IEEE80211_BAND_5GHZ);
-
- arg0 = rt2x00dev->led_reg & 0xff;
- arg1 = (rt2x00dev->led_reg >> 8) & 0xff;
-
- rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1);
-}
-
-static void rt61pci_disable_led(struct rt2x00_dev *rt2x00dev)
-{
- u16 led_reg;
- u8 arg0;
- u8 arg1;
-
- led_reg = rt2x00dev->led_reg;
- rt2x00_set_field16(&led_reg, MCU_LEDCS_RADIO_STATUS, 0);
- rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_BG_STATUS, 0);
- rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_A_STATUS, 0);
-
- arg0 = led_reg & 0xff;
- arg1 = (led_reg >> 8) & 0xff;
-
- rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1);
-}
-
-static void rt61pci_activity_led(struct rt2x00_dev *rt2x00dev, int rssi)
-{
- u8 led;
-
- if (rt2x00dev->led_mode != LED_MODE_SIGNAL_STRENGTH)
- return;
-
- /*
- * Led handling requires a positive value for the rssi,
- * to do that correctly we need to add the correction.
- */
- rssi += rt2x00dev->rssi_offset;
-
- if (rssi <= 30)
- led = 0;
- else if (rssi <= 39)
- led = 1;
- else if (rssi <= 49)
- led = 2;
- else if (rssi <= 53)
- led = 3;
- else if (rssi <= 63)
- led = 4;
- else
- led = 5;
-
- rt61pci_mcu_request(rt2x00dev, MCU_LED_STRENGTH, 0xff, led, 0);
-}
-
/*
* Link tuning
*/
u8 up_bound;
u8 low_bound;
- /*
- * Update Led strength
- */
- rt61pci_activity_led(rt2x00dev, rssi);
-
rt61pci_bbp_read(rt2x00dev, 17, &r17);
/*
rt2x00pci_register_write(rt2x00dev, MAC_CSR13, 0x0000e000);
+ rt2x00pci_register_read(rt2x00dev, MAC_CSR14, ®);
+ rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, 70);
+ rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, 30);
+ rt2x00pci_register_write(rt2x00dev, MAC_CSR14, reg);
+
/*
* Invalidate all Shared Keys (SEC_CSR0),
* and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5)
rt2x00_set_field32(®, RX_CNTL_CSR_ENABLE_RX_DMA, 1);
rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg);
- /*
- * Enable LED
- */
- rt61pci_enable_led(rt2x00dev);
-
return 0;
}
{
u32 reg;
- /*
- * Disable LED
- */
- rt61pci_disable_led(rt2x00dev);
-
rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x00001818);
/*
* If the eeprom value is invalid,
* switch to default led mode.
*/
+#ifdef CONFIG_RT61PCI_LEDS
rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
- rt2x00dev->led_mode = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE);
+ value = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE);
+
+ switch (value) {
+ case LED_MODE_TXRX_ACTIVITY:
+ case LED_MODE_ASUS:
+ case LED_MODE_ALPHA:
+ case LED_MODE_DEFAULT:
+ rt2x00dev->led_flags =
+ LED_SUPPORT_RADIO | LED_SUPPORT_ASSOC;
+ break;
+ case LED_MODE_SIGNAL_STRENGTH:
+ rt2x00dev->led_flags =
+ LED_SUPPORT_RADIO | LED_SUPPORT_ASSOC |
+ LED_SUPPORT_QUALITY;
+ break;
+ }
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LED_MODE,
- rt2x00dev->led_mode);
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_0,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value);
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_0));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_1,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_1,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_1));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_2,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_2,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_2));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_3,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_3,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_3));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_4,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_4,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_4));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_ACT,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_ACT,
rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_BG,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_BG,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_RDY_G));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_A,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_RDY_A));
+#endif /* CONFIG_RT61PCI_LEDS */
return 0;
}
.link_stats = rt61pci_link_stats,
.reset_tuner = rt61pci_reset_tuner,
.link_tuner = rt61pci_link_tuner,
+ .led_brightness = rt61pci_led_brightness,
.write_tx_desc = rt61pci_write_tx_desc,
.write_tx_data = rt2x00pci_write_tx_data,
.kick_tx_queue = rt61pci_kick_tx_queue,
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+#ifdef CONFIG_RT73USB_LEDS
+static void rt73usb_led_brightness(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct rt2x00_led *led =
+ container_of(led_cdev, struct rt2x00_led, led_dev);
+ unsigned int enabled = brightness != LED_OFF;
+ unsigned int a_mode =
+ (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
+ unsigned int bg_mode =
+ (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
+
+ if (led->type == LED_TYPE_RADIO) {
+ rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
+ MCU_LEDCS_RADIO_STATUS, enabled);
+
+ rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL, 0,
+ led->rt2x00dev->led_mcu_reg,
+ REGISTER_TIMEOUT);
+ } else if (led->type == LED_TYPE_ASSOC) {
+ rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
+ MCU_LEDCS_LINK_BG_STATUS, bg_mode);
+ rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
+ MCU_LEDCS_LINK_A_STATUS, a_mode);
+
+ rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL, 0,
+ led->rt2x00dev->led_mcu_reg,
+ REGISTER_TIMEOUT);
+ } else if (led->type == LED_TYPE_QUALITY) {
+ /*
+ * The brightness is divided into 6 levels (0 - 5),
+ * this means we need to convert the brightness
+ * argument into the matching level within that range.
+ */
+ rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL,
+ brightness / (LED_FULL / 6),
+ led->rt2x00dev->led_mcu_reg,
+ REGISTER_TIMEOUT);
+ }
+}
+#else
+#define rt73usb_led_brightness NULL
+#endif /* CONFIG_RT73USB_LEDS */
+
/*
* Configuration handlers.
*/
rt73usb_config_duration(rt2x00dev, libconf);
}
-/*
- * LED functions.
- */
-static void rt73usb_enable_led(struct rt2x00_dev *rt2x00dev)
-{
- u32 reg;
-
- rt73usb_register_read(rt2x00dev, MAC_CSR14, ®);
- rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, 70);
- rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, 30);
- rt73usb_register_write(rt2x00dev, MAC_CSR14, reg);
-
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 1);
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_A_STATUS,
- (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_BG_STATUS,
- (rt2x00dev->rx_status.band != IEEE80211_BAND_5GHZ));
-
- rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, 0x0000,
- rt2x00dev->led_reg, REGISTER_TIMEOUT);
-}
-
-static void rt73usb_disable_led(struct rt2x00_dev *rt2x00dev)
-{
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 0);
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_BG_STATUS, 0);
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_A_STATUS, 0);
-
- rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, 0x0000,
- rt2x00dev->led_reg, REGISTER_TIMEOUT);
-}
-
-static void rt73usb_activity_led(struct rt2x00_dev *rt2x00dev, int rssi)
-{
- u32 led;
-
- if (rt2x00dev->led_mode != LED_MODE_SIGNAL_STRENGTH)
- return;
-
- /*
- * Led handling requires a positive value for the rssi,
- * to do that correctly we need to add the correction.
- */
- rssi += rt2x00dev->rssi_offset;
-
- if (rssi <= 30)
- led = 0;
- else if (rssi <= 39)
- led = 1;
- else if (rssi <= 49)
- led = 2;
- else if (rssi <= 53)
- led = 3;
- else if (rssi <= 63)
- led = 4;
- else
- led = 5;
-
- rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, led,
- rt2x00dev->led_reg, REGISTER_TIMEOUT);
-}
-
/*
* Link tuning
*/
u8 up_bound;
u8 low_bound;
- /*
- * Update Led strength
- */
- rt73usb_activity_led(rt2x00dev, rssi);
-
rt73usb_bbp_read(rt2x00dev, 17, &r17);
/*
return status;
}
- rt73usb_disable_led(rt2x00dev);
-
return 0;
}
rt73usb_register_write(rt2x00dev, MAC_CSR13, 0x00007f00);
+ rt73usb_register_read(rt2x00dev, MAC_CSR14, ®);
+ rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, 70);
+ rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, 30);
+ rt73usb_register_write(rt2x00dev, MAC_CSR14, reg);
+
/*
* Invalidate all Shared Keys (SEC_CSR0),
* and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5)
return -EIO;
}
- /*
- * Enable LED
- */
- rt73usb_enable_led(rt2x00dev);
-
return 0;
}
static void rt73usb_disable_radio(struct rt2x00_dev *rt2x00dev)
{
- /*
- * Disable LED
- */
- rt73usb_disable_led(rt2x00dev);
-
rt73usb_register_write(rt2x00dev, MAC_CSR10, 0x00001818);
/*
/*
* Store led settings, for correct led behaviour.
*/
+#ifdef CONFIG_RT73USB_LEDS
rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LED_MODE,
- rt2x00dev->led_mode);
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_0,
+ switch (value) {
+ case LED_MODE_TXRX_ACTIVITY:
+ case LED_MODE_ASUS:
+ case LED_MODE_ALPHA:
+ case LED_MODE_DEFAULT:
+ rt2x00dev->led_flags =
+ LED_SUPPORT_RADIO | LED_SUPPORT_ASSOC;
+ break;
+ case LED_MODE_SIGNAL_STRENGTH:
+ rt2x00dev->led_flags =
+ LED_SUPPORT_RADIO | LED_SUPPORT_ASSOC |
+ LED_SUPPORT_QUALITY;
+ break;
+ }
+
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value);
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_0));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_1,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_1,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_1));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_2,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_2,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_2));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_3,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_3,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_3));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_4,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_4,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_GPIO_4));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_ACT,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_ACT,
rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_BG,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_BG,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_RDY_G));
- rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_A,
+ rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_RDY_A));
+#endif /* CONFIG_RT73USB_LEDS */
return 0;
}
.link_stats = rt73usb_link_stats,
.reset_tuner = rt73usb_reset_tuner,
.link_tuner = rt73usb_link_tuner,
+ .led_brightness = rt73usb_led_brightness,
.write_tx_desc = rt73usb_write_tx_desc,
.write_tx_data = rt2x00usb_write_tx_data,
.get_tx_data_len = rt73usb_get_tx_data_len,
projects / linux-2.6-omap-h63xx.git / commitdiff