[ARM] USB: update pxa27x ohci driver to use clk support

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 23d2fe5a62f4d65c2f2c1c5eac47e79b5cd2d3e0..ff9a79843471624ceb9f164f2089127bfb39d09a 100644 (file)
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -22,6 +22,7 @@
 #include <linux/device.h>
 #include <linux/signal.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 
 #include <asm/mach-types.h>
 #include <asm/hardware.h>
@@ -32,6 +33,8 @@
 
 #define UHCRHPS(x)              __REG2( 0x4C000050, (x)<<2 )
 
+static struct clk *usb_clk;
+
 /*
   PMM_NPS_MODE -- PMM Non-power switching mode
       Ports are powered continuously.
@@ -80,7 +83,7 @@ static int pxa27x_start_hc(struct device *dev)
 
        inf = dev->platform_data;
 
-       pxa_set_cken(CKEN_USBHOST, 1);
+       clk_enable(usb_clk);
 
        UHCHR |= UHCHR_FHR;
        udelay(11);
@@ -123,7 +126,7 @@ static void pxa27x_stop_hc(struct device *dev)
        UHCCOMS |= 1;
        udelay(10);
 
-       pxa_set_cken(CKEN_USBHOST, 0);
+       clk_disable(usb_clk);
 }
 
 
@@ -158,6 +161,10 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
                return -ENOMEM;
        }
 
+       usb_clk = clk_get(&pdev->dev, "USBCLK");
+       if (IS_ERR(usb_clk))
+               return PTR_ERR(usb_clk);
+
        hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x");
        if (!hcd)
                return -ENOMEM;
@@ -201,6 +208,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
  err1:
        usb_put_hcd(hcd);
+       clk_put(usb_clk);
        return retval;
 }
 
@@ -225,6 +233,7 @@ void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev)
        iounmap(hcd->regs);
        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
        usb_put_hcd(hcd);
+       clk_put(usb_clk);
 }
 
 /*-------------------------------------------------------------------------*/