#include <mach/control.h>
#include <mach/cpu.h>
-static u32 class;
-static void __iomem *tap_base;
-static u16 tap_prod_id;
-
-#define OMAP_TAP_IDCODE 0x0204
-#define OMAP_TAP_DIE_ID_0 0x0218
-#define OMAP_TAP_DIE_ID_1 0x021C
-#define OMAP_TAP_DIE_ID_2 0x0220
-#define OMAP_TAP_DIE_ID_3 0x0224
-
-/* system_rev fields for OMAP2 processors:
- * CPU id bits [31:16],
- * CPU device type [15:12], (unprg,normal,POP)
- * CPU revision [11:08]
- * CPU class bits [07:00]
- */
-
-struct omap_id {
- u16 hawkeye; /* Silicon type (Hawkeye id) */
- u8 dev; /* Device type from production_id reg */
- u32 type; /* combined type id copied to system_rev */
-};
-
-/* Register values to detect the OMAP version */
-static struct omap_id omap_ids[] __initdata = {
- { .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200000 },
- { .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201000 },
- { .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202000 },
- { .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220000 },
- { .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230000 },
- { .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300000 },
-};
-
static struct omap_chip_id omap_chip;
/**
}
EXPORT_SYMBOL(omap_chip_is);
-static u32 __init read_tap_reg(int reg)
-{
- unsigned int regval = 0;
- u32 cpuid;
+/*----------------------------------------------------------------------------*/
- /* Reading the IDCODE register on 3430 ES1 results in a
- * data abort as the register is not exposed on the OCP
- * Hence reading the Cortex Rev
- */
- cpuid = read_cpuid(CPUID_ID);
-
- /* If the processor type is Cortex-A8 and the revision is 0x0
- * it means its Cortex r0p0 which is 3430 ES1
- */
- if ((((cpuid >> 4) & 0xFFF) == 0xC08) && ((cpuid & 0xF) == 0x0)) {
-
- if (reg == tap_prod_id) {
- regval = 0x000F00F0;
- goto out;
- }
-
- switch (reg) {
- case OMAP_TAP_IDCODE : regval = 0x0B7AE02F; break;
- /* Making DevType as 0xF in ES1 to differ from ES2 */
- case OMAP_TAP_DIE_ID_0: regval = 0x01000000; break;
- case OMAP_TAP_DIE_ID_1: regval = 0x1012d687; break;
- case OMAP_TAP_DIE_ID_2: regval = 0x00000000; break;
- case OMAP_TAP_DIE_ID_3: regval = 0x2d2c0000; break;
- }
- } else
- regval = __raw_readl(tap_base + reg);
-
-out:
- return regval;
-
-}
-
-/*
- * _set_system_rev - set the system_rev global based on current OMAP chip type
- *
- * Set the system_rev global. This is primarily used by the cpu_is_omapxxxx()
- * macros.
- */
-static void __init _set_system_rev(u32 type, u8 rev)
-{
- u32 i, ctrl_status;
-
- /*
- * system_rev encoding is as follows
- * system_rev & 0xff000000 -> Omap Class (24xx/34xx)
- * system_rev & 0xfff00000 -> Omap Sub Class (242x/343x)
- * system_rev & 0xffff0000 -> Omap type (2420/2422/2423/2430/3430)
- * system_rev & 0x0000f000 -> Silicon revision (ES1, ES2 )
- * system_rev & 0x00000700 -> Device Type ( EMU/HS/GP/BAD )
- * system_rev & 0x000000c0 -> IDCODE revision[6:7]
- * system_rev & 0x0000003f -> sys_boot[0:5]
- */
- /* Embedding the ES revision info in type field */
- system_rev = type;
- /* Also add IDCODE revision info only two lower bits */
- system_rev |= ((rev & 0x3) << 6);
-
- /* Add in the device type and sys_boot fields (see above) */
- if (cpu_is_omap24xx()) {
- i = OMAP24XX_CONTROL_STATUS;
- } else if (cpu_is_omap343x()) {
- i = OMAP343X_CONTROL_STATUS;
- } else {
- printk(KERN_ERR "id: unknown CPU type\n");
- BUG();
- }
- ctrl_status = omap_ctrl_readl(i);
- system_rev |= (ctrl_status & (OMAP2_SYSBOOT_5_MASK |
- OMAP2_SYSBOOT_4_MASK |
- OMAP2_SYSBOOT_3_MASK |
- OMAP2_SYSBOOT_2_MASK |
- OMAP2_SYSBOOT_1_MASK |
- OMAP2_SYSBOOT_0_MASK));
- system_rev |= (ctrl_status & OMAP2_DEVICETYPE_MASK);
-}
-
-
-/*
- * _set_omap_chip - set the omap_chip global based on OMAP chip type
- *
- * Build the omap_chip bits. This variable is used by powerdomain and
- * clockdomain code to indicate whether structures are applicable for
- * the current OMAP chip type by ANDing it against a 'platform' bitfield
- * in the structure.
- */
-static void __init _set_omap_chip(void)
-{
- if (cpu_is_omap343x()) {
-
- omap_chip.oc = CHIP_IS_OMAP3430;
- if (is_sil_rev_equal_to(OMAP3430_REV_ES1_0))
- omap_chip.oc |= CHIP_IS_OMAP3430ES1;
- else if (is_sil_rev_greater_than(OMAP3430_REV_ES1_0))
- omap_chip.oc |= CHIP_IS_OMAP3430ES2;
-
- } else if (cpu_is_omap243x()) {
-
- /* Currently only supports 2430ES2.1 and 2430-all */
- omap_chip.oc |= CHIP_IS_OMAP2430;
-
- } else if (cpu_is_omap242x()) {
-
- /* Currently only supports 2420ES2.1.1 and 2420-all */
- omap_chip.oc |= CHIP_IS_OMAP2420;
+#define OMAP_TAP_IDCODE 0x0204
+#define OMAP_TAP_DIE_ID_0 0x0218
+#define OMAP_TAP_DIE_ID_1 0x021C
+#define OMAP_TAP_DIE_ID_2 0x0220
+#define OMAP_TAP_DIE_ID_3 0x0224
- } else {
+#define read_tap_reg(reg) __raw_readl(tap_base + (reg))
- /* Current CPU not supported by this code. */
- printk(KERN_WARNING "OMAP chip type code does not yet support "
- "this CPU type.\n");
- WARN_ON(1);
+struct omap_id {
+ u16 hawkeye; /* Silicon type (Hawkeye id) */
+ u8 dev; /* Device type from production_id reg */
+ u32 type; /* Combined type id copied to system_rev */
+};
- }
+/* Register values to detect the OMAP version */
+static struct omap_id omap_ids[] __initdata = {
+ { .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200024 },
+ { .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201024 },
+ { .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202024 },
+ { .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220024 },
+ { .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230024 },
+ { .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300024 },
+};
-}
+static void __iomem *tap_base;
+static u16 tap_prod_id;
void __init omap24xx_check_revision(void)
{
int i, j;
- u32 idcode;
- u32 prod_id;
+ u32 idcode, prod_id;
u16 hawkeye;
- u8 dev_type;
- u8 rev;
+ u8 dev_type, rev;
idcode = read_tap_reg(OMAP_TAP_IDCODE);
prod_id = read_tap_reg(tap_prod_id);
pr_debug("OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
prod_id, dev_type);
- /*
- * Detection for 34xx ES2.0 and above can be done with just
- * hawkeye and rev. See TRM 1.5.2 Device Identification.
- * Note that rev cannot be used directly as ES1.0 uses value 0.
- */
- if (hawkeye == 0xb7ae) {
- system_rev = 0x34300000 | ((1 + rev) << 12);
- pr_info("OMAP%04x ES2.%i\n", system_rev >> 16, rev);
- _set_omap_chip();
- return;
- }
-
/* Check hawkeye ids */
for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
if (hawkeye == omap_ids[i].hawkeye)
j = i;
}
- _set_system_rev(omap_ids[j].type, rev);
-
- _set_omap_chip();
-
pr_info("OMAP%04x", system_rev >> 16);
if ((system_rev >> 8) & 0x0f)
pr_info("ES%x", (system_rev >> 12) & 0xf);
pr_info("\n");
+}
+
+void __init omap34xx_check_revision(void)
+{
+ u32 cpuid, idcode;
+ u16 hawkeye;
+ u8 rev;
+ char *rev_name = "ES1.0";
+
+ /*
+ * We cannot access revision registers on ES1.0.
+ * If the processor type is Cortex-A8 and the revision is 0x0
+ * it means its Cortex r0p0 which is 3430 ES1.0.
+ */
+ cpuid = read_cpuid(CPUID_ID);
+ if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
+ system_rev = OMAP3430_REV_ES1_0;
+ goto out;
+ }
+
+ /*
+ * Detection for 34xx ES2.0 and above can be done with just
+ * hawkeye and rev. See TRM 1.5.2 Device Identification.
+ * Note that rev does not map directly to our defined processor
+ * revision numbers as ES1.0 uses value 0.
+ */
+ idcode = read_tap_reg(OMAP_TAP_IDCODE);
+ hawkeye = (idcode >> 12) & 0xffff;
+ rev = (idcode >> 28) & 0xff;
+ if (hawkeye == 0xb7ae) {
+ switch (rev) {
+ case 0:
+ system_rev = OMAP3430_REV_ES2_0;
+ rev_name = "ES2.0";
+ break;
+ case 2:
+ system_rev = OMAP3430_REV_ES2_1;
+ rev_name = "ES2.1";
+ break;
+ case 3:
+ system_rev = OMAP3430_REV_ES3_0;
+ rev_name = "ES3.0";
+ break;
+ default:
+ /* Use the latest known revision as default */
+ system_rev = OMAP3430_REV_ES3_0;
+ rev_name = "Unknown revision\n";
+ }
+ }
+
+out:
+ pr_info("OMAP%04x %s\n", system_rev >> 16, rev_name);
}
+/*
+ * Try to detect the exact revision of the omap we're running on
+ */
void __init omap2_check_revision(void)
{
- omap24xx_check_revision();
+ /*
+ * At this point we have an idea about the processor revision set
+ * earlier with omap2_set_globals_tap().
+ */
+ if (cpu_is_omap24xx())
+ omap24xx_check_revision();
+ else if (cpu_is_omap34xx())
+ omap34xx_check_revision();
+ else
+ pr_err("OMAP revision unknown, please fix!\n");
+
+ /*
+ * OK, now we know the exact revision. Initialize omap_chip bits
+ * for powerdowmain and clockdomain code.
+ */
+ if (cpu_is_omap243x()) {
+ /* Currently only supports 2430ES2.1 and 2430-all */
+ omap_chip.oc |= CHIP_IS_OMAP2430;
+ } else if (cpu_is_omap242x()) {
+ /* Currently only supports 2420ES2.1.1 and 2420-all */
+ omap_chip.oc |= CHIP_IS_OMAP2420;
+ } else if (cpu_is_omap343x()) {
+ omap_chip.oc = CHIP_IS_OMAP3430;
+ if (system_rev == OMAP3430_REV_ES1_0)
+ omap_chip.oc |= CHIP_IS_OMAP3430ES1;
+ else if (system_rev > OMAP3430_REV_ES1_0)
+ omap_chip.oc |= CHIP_IS_OMAP3430ES2;
+ } else {
+ pr_err("Uninitialized omap_chip, please fix!\n");
+ }
}
+/*
+ * Set up things for map_io and processor detection later on. Gets called
+ * pretty much first thing from board init. For multi-omap, this gets
+ * cpu_is_omapxxxx() working accurately enough for map_io. Then we'll try to
+ * detect the exact revision later on in omap2_detect_revision() once map_io
+ * is done.
+ */
void __init omap2_set_globals_tap(struct omap_globals *omap2_globals)
{
- class = omap2_globals->class;
+ system_rev = omap2_globals->class;
tap_base = omap2_globals->tap;
- if (class == 0x3430)
+ if (cpu_is_omap34xx())
tap_prod_id = 0x0210;
else
tap_prod_id = 0x0208;
struct omap_chip_id {
u8 oc;
+ u8 type;
};
#define OMAP_CHIP_INIT(x) { .oc = x }
+/*
+ * system_rev bits:
+ * CPU id bits (0730, 1510, 1710, 2422...) [31:16]
+ * CPU revision (See _REV_ defined in cpu.h) [15:08]
+ * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00]
+ */
extern unsigned int system_rev;
-#define omap2_cpu_rev() ((system_rev >> 12) & 0x0f)
-
/*
* Test if multicore OMAP support is needed
*/
* cpu_is_omap243x(): True for OMAP2430
* cpu_is_omap343x(): True for OMAP3430
*/
-#define GET_OMAP_CLASS ((system_rev >> 24) & 0xff)
+#define GET_OMAP_CLASS (system_rev & 0xff)
#define IS_OMAP_CLASS(class, id) \
static inline int is_omap ##class (void) \
#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx())
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-/*
- * Macros to detect silicon revision of OMAP2/3 processors.
- * is_sil_rev_greater_than: true if passed cpu type & its rev is greater.
- * is_sil_rev_lesser_than: true if passed cpu type & its rev is lesser.
- * is_sil_rev_equal_to: true if passed cpu type & its rev is equal.
- * get_sil_rev: return the silicon rev value.
- */
-#define get_sil_omap_type(rev) ((rev & 0xffff0000) >> 16)
-#define get_sil_revision(rev) ((rev & 0x0000f000) >> 12)
-#define is_sil_rev_greater_than(rev) \
- ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
- (get_sil_revision(system_rev) > get_sil_revision(rev)))
+/* Various silicon revisions for omap2 */
+#define OMAP242X_CLASS 0x24200024
+#define OMAP2420_REV_ES1_0 0x24200024
+#define OMAP2420_REV_ES2_0 0x24201024
-#define is_sil_rev_less_than(rev) \
- ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
- (get_sil_revision(system_rev) < get_sil_revision(rev)))
+#define OMAP243X_CLASS 0x24300024
+#define OMAP2430_REV_ES1_0 0x24300024
-#define is_sil_rev_equal_to(rev) \
- ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
- (get_sil_revision(system_rev) == get_sil_revision(rev)))
-
-#define get_sil_rev() \
- get_sil_revision(system_rev)
-
-/* Various silicon macros defined here */
-#define OMAP242X_CLASS 0x24200000
-#define OMAP2420_REV_ES1_0 0x24200000
-#define OMAP2420_REV_ES2_0 0x24201000
-
-#define OMAP243X_CLASS 0x24300000
-#define OMAP2430_REV_ES1_0 0x24300000
-
-#define OMAP343X_CLASS 0x34300000
-#define OMAP3430_REV_ES1_0 0x34300000
-#define OMAP3430_REV_ES2_0 0x34301000
-#define OMAP3430_REV_ES2_1 0x34302000
-#define OMAP3430_REV_ES2_2 0x34303000
+#define OMAP343X_CLASS 0x34300034
+#define OMAP3430_REV_ES1_0 0x34300034
+#define OMAP3430_REV_ES2_0 0x34301034
+#define OMAP3430_REV_ES2_1 0x34302034
+#define OMAP3430_REV_ES3_0 0x34303034
/*
* omap_chip bits
#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
int omap_chip_is(struct omap_chip_id oci);
-
+int omap_type(void);
/*
* Macro to detect device type i.e. EMU/HS/TST/GP/BAD
*/
-#define DEVICE_TYPE_TEST 0
-#define DEVICE_TYPE_EMU 1
-#define DEVICE_TYPE_SEC 2
-#define DEVICE_TYPE_GP 3
-#define DEVICE_TYPE_BAD 4
-
-#define get_device_type() ((system_rev & 0x700) >> 8)
-#define is_device_type_test() (get_device_type() == DEVICE_TYPE_TEST)
-#define is_device_type_emu() (get_device_type() == DEVICE_TYPE_EMU)
-#define is_device_type_sec() (get_device_type() == DEVICE_TYPE_SEC)
-#define is_device_type_gp() (get_device_type() == DEVICE_TYPE_GP)
-#define is_device_type_bad() (get_device_type() == DEVICE_TYPE_BAD)
+#define OMAP2_DEVICE_TYPE_TEST 0
+#define OMAP2_DEVICE_TYPE_EMU 1
+#define OMAP2_DEVICE_TYPE_SEC 2
+#define OMAP2_DEVICE_TYPE_GP 3
+#define OMAP2_DEVICE_TYPE_BAD 4
void omap2_check_revision(void);
projects / linux-2.6-omap-h63xx.git / commitdiff