This option enables support for MIPS Technologies MIPSsim software
emulator.
-config MACH_EMMA
- bool "NEC EMMA series based machines"
+config NEC_MARKEINS
+ bool "NEC EMMA2RH Mark-eins board"
+ select SOC_EMMA2RH
+ select HW_HAS_PCI
+ help
+ This enables support for the NEC Electronics Mark-eins boards.
config MACH_VR41XX
bool "NEC VR4100 series based machines"
source "arch/mips/alchemy/Kconfig"
source "arch/mips/basler/excite/Kconfig"
-source "arch/mips/emma/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/lasat/Kconfig"
source "arch/mips/pmc-sierra/Kconfig"
bool
select SERIAL_RM9000
+config SOC_EMMA2RH
+ bool
+ select CEVT_R4K
+ select CSRC_R4K
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_R5500
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+
config SOC_PNX833X
bool
select CEVT_R4K
config SWAP_IO_SPACE
bool
-config EMMA2RH
- bool
- depends on MARKEINS
- default y
-
config SERIAL_RM9000
bool
#
# Common NEC EMMAXXX
#
-core-$(CONFIG_SOC_EMMA) += arch/mips/emma/common/
+core-$(CONFIG_SOC_EMMA2RH) += arch/mips/emma/common/
cflags-$(CONFIG_SOC_EMMA2RH) += -I$(srctree)/arch/mips/include/asm/mach-emma2rh
#
# CONFIG_PNX8550_STB810 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
-CONFIG_MARKEINS=y
+CONFIG_NEC_MARKEINS=y
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_SWAP_IO_SPACE=y
-CONFIG_EMMA2RH=y
+CONFIG_SOC_EMMA2RH=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x1e000000
-CONFIG_MTD_PHYSMAP_LEN=0x02000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
# CONFIG_MTD_PLATRAM is not set
#
+++ /dev/null
-choice
- prompt "Machine type"
- depends on MACH_EMMA
- default NEC_MARKEINS
-
-config NEC_MARKEINS
- bool "NEC EMMA2RH Mark-eins board"
- select SOC_EMMA2RH
- select HW_HAS_PCI
- help
- This enables support for the NEC Electronics Mark-eins boards.
-
-endchoice
-
-config SOC_EMMA2RH
- bool
- select SOC_EMMA
- select SYS_HAS_CPU_R5500
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
-
-config SOC_EMMA
- bool
- select CEVT_R4K
- select CSRC_R4K
- select DMA_NONCOHERENT
- select IRQ_CPU
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_BIG_ENDIAN
},
};
-static struct platform_device *devices[] = {
- &i2c_emma_devices[0],
- &i2c_emma_devices[1],
- &i2c_emma_devices[2],
- &serial_emma,
-};
-
static struct mtd_partition markeins_parts[] = {
[0] = {
.name = "RootFS",
},
};
+static struct physmap_flash_data markeins_flash_data = {
+ .width = 2,
+ .nr_parts = ARRAY_SIZE(markeins_parts),
+ .parts = markeins_parts
+};
+
+static struct resource markeins_flash_resource = {
+ .start = 0x1e000000,
+ .end = 0x02000000,
+ .flags = IORESOURCE_MEM
+};
+
+static struct platform_device markeins_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &markeins_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &markeins_flash_resource,
+};
+
+static struct platform_device *devices[] = {
+ i2c_emma_devices,
+ i2c_emma_devices + 1,
+ i2c_emma_devices + 2,
+ &serial_emma,
+ &markeins_flash_device,
+};
+
static int __init platform_devices_setup(void)
{
- physmap_set_partitions(markeins_parts, ARRAY_SIZE(markeins_parts));
return platform_add_devices(devices, ARRAY_SIZE(devices));
}
arch_initcall(platform_devices_setup);
-